太陽光電設備與週邊材料零組件產品技術交流觀摩會

太陽光電設備與週邊材料零組件產品技術交流觀摩會

PowerFELX Flexible CIGS PV Panel軟性 CIGS 太陽能模組

主辦 :TPVIA 台灣太陽光電產業協會時間 : 2012 年四月 17 日地點 : 工研院中興院區主講 : 吳端城 / 圓準股份有限公司

Smooth & Sharp Corp. 圓準股份有限公司

CIGS?CIGS? 軟性軟性 ??有影嗎有影嗎 !?!?

CIGS 生產軟性價格

效率 ? 可以量產嗎 ? 真的嗎 ? 是晶矽模組的五倍 !


如果要與晶矽產品比較投資回收時間，如果要與晶矽產品比較投資回收時間，請直接考慮晶矽產請直接考慮晶矽產品品 !!


Global Solar EnegryGlobal Solar Enegry軟性軟性 CIGSCIGS太陽能模組太陽能模組

不鏽鋼基材 CIGS 電池片電池串 String

玻璃模組

軟性模組製程介紹

軟性軟性 CIGSCIGS太陽能模組要用在那裡太陽能模組要用在那裡 ??

標準晶矽模組無法安裝的地方

負載不足的建築物例如 : 車棚，輕型倉庫等

弧度較大的屋頂建築物立面怕漏水，不要打樁 ! 無須建照，快速安裝 !


軟性軟性 CIGSCIGS 太陽能模組最佳應用太陽能模組最佳應用 ::規格取勝規格取勝 !!

PowerFLEXPowerFLEX 軟性軟性 CIGSCIGS太陽能模組太陽能模組應用實例應用實例


八里焚化爐廠區 : 2kW 義大利米蘭倉庫 : 20kW


日本大阪大學弧形應用展示日本屋頂浪板應用展示



日本水土保持覆蓋應用展示日本立面牆應用展示




日本室外帆布應用展示日本卡車車台應用展示

CIGS Technology

CIGS DissectedCo-evaporated CIGS deposition onto .001”-thick, 1km-long stainless steel foil is the basis of our proprietary roll-to-roll manufacturing process. This Best Known Method of manufacturing flexible CIGS thin film photovoltaic cells results in lower material usage, lower manufacturing costs, and higher efficiency.

Best Absorbtion of SunlightCIGS is known for best sunlight absorption of all photovoltaic technologies. This property allows it to perform well in diffuse blue, evening red, and all light conditions in between.


Roof Coverage

The Problem with TiltSolar panels are typically mounted at a fixed tilt angle, representing a trade-off between summer and winter production. Adjacent rows of tilted panels must be spaced to avoid shading; this spacing, however, reduces the power density of the array. Inadequate spacing can result in significant power losses (see below).

Flat Panel AdvantageGlobal Solar’s PowerFLEX modules enable simpler, more versatile, and higher power density solutions for limited area roof-top installations. The result is higher net energy production per rooftop.


PowerFLEX™ BIPV Designed Specifically for roofsIntegrates with roof surface

No mounting hardware No roof penetrations No additional wind load

Flexible module Fits all roof types Durable, non-breakable

Light weight 2.5 kg/m2 (0.5 lb/ft2) with adhesive No structural reinforcement required

More energy per roofHigh efficiency CIGS

10.5% to 12.6% aperture efficiency 50% more efficient than flexible a-Si

High performance Performs in all light conditions Shade tolerant

Covers entire roof area Lays flat. No tilt required No module spacing required Conforms to roof shape

Lower Installed System CostsLarge format module

250-300 Watts 5.7m x 0.5m dimensions 30 to 40% BOS & Installation cost

savingsSmooth & Sharp Corp. 圓準股份有限公司

CIGS - PowerFLEXTM

a-Si

c-Si

Characteristics Watts /module Annual Production (kWh)



Flexible 300 67,400Lightweight 2.5kg/m2FlatLow Wind UpliftNo Rack Required

Flexible 144 42,300Lightweight 2.5kg/m2FlatLow Wind UpliftNo Rack Required

Rigid Glass 235 34,600Weight 20 - 50 kg/m2Fixed TiltHigh Wind UpliftRack Required

Module: • Lightweight - No structural reinforcement needed • No penetrations

System: • Greater Roof Coverage • Maximum Power Density on Roof • 40% - 50% Savings BOS & Installation

Net Result: • Highest Net Production from Rooftop

PowerFLEXTM Benefits

More value per roofMunich – 1000m2 roof


Cost and Performance

Installation Direct CostsBOS | Installation Labor | Mounting Racks

When direct project costs are divided by its 300-Watt module rating, the PowerFLEX system presents a possible 30 to 40% cost advantage vs industry standard modules.

Installation Indirect CostsPermits | Engineering & Design | Overhead

When indirect project costs are divided by the total array power, PowerFLEX’s higher power density can result in a comparative advantage of 40 to 50% savings vs other technologies.

PerformanceExamples

100m2 Fixed Area


Installation and IntegrationApplication: In the field or in the factory Global Solar’s PowerFLEX module enables a wide range of system innovation.

Installation: Modules can be installed in the field using accepted roofing practices. The flexible module can be applied to new, clean roofing surfaces (single ply membrane, modified bitumen, and metal) using approved adhesives such as butyl mastic.

Integration: OEM’s can take advantage of the flexible, high efficiency characteristics of PowerFLEX to develop innovative, integrated, and value-added BIPV products for their own manufacturing lines and market channels.


謝謝 !

產品相關諮詢請洽 :

吳端城 / 圓準股份有限公司電話 : 02 - 8919 1118手機 : 0935 – 733 540

Mail: [email protected]


太陽光電設備與週邊材料零組件產品 技術交流觀摩會

Documents

太陽光電設備與週邊材料零組件產品技術交流觀摩會