抗擠壓 / 絕緣 / 抗腐蝕 ip67 enclosure catalogue · injection molding it is easy to make...

日煬科技有限公司JD Auspice Co., Ltd

JDA

JD Auspice Co.,Ltd.　TEL: 886-2-8991-2796　FAX: 886-2-8991-9298　[email protected]　www.jdauspice.com

IP67 Enclosure CatalogueCompressive property, Insulation, Free from corrosion

抗擠壓 / 絕緣 / 抗腐蝕


JDA box Ingress Protection Grade

JDA box Material

Characteristics of JDA box Plastic enclosure

How to choose JDA box's products

P Series

H Series - Medium and large size

H Series - Medium size

H Series - Small size

S Series - Medium size

S Series - Small size

M Series

Aluminium Die Casting Box

Dual door

All-in-one Dual door

Aluminium housing for inserting card

Cable Glands and Accessories

Page 03

Page 04

Page 05

Page 06-09

Page 10-11

Page 12-13

Page 14-15

Page 16-17

Page 18-19

0-21

Page 22-23

Page 24

Page 25

Page 26

Page 27

Page 28-33


IEC(International Electrotechnical Commission)

defines protection structure ofelectric instruments or protectionboxes as follows.

Second No. Protection against solidProtection code

FirstNumber

SecondNumber

IKCodeProtection againist solid

No protection No protection No protection

Impact= <1 joule

Impact= 1 joule

Impact= 2 joule

Impact= 5 joule

Impact= 10 joule

Impact= 20 joule

Protected againstsolid objects up to50mm, e.g. accidentaltouch by hands.

Protected againstvertically fallingdrops of water e.g.condensation.

Protected againstdirect sprsys ofwater up to 15°from the vertical

Protected againstdirect sprays ofwater up to 60°from the vertical.

Protecion againstwater sprays fromall directions olimited ingresspermitted.

Protected againstlow pressure jets ofwater, from alldirections o limitedingress.

Protected againstlow pressure jets ofwater, e.g. lor useon ship decks-limitedingress permitted

Protected againstthe effect ofimmersion between15cm and 1mm

Protected againstlong periods ofimmersion underpressure.

Protected against solid objects up to12mm, e.g. fingers.

Protected against solid objects over2.5mm(tools and wires).

Protected against solid objects over1 mm(tools , wires and amall wire).

Protected against dust imited ingress(no harmful deposit)

Totally protectedagainst dust

Protection againist liquids Protection againistmechanical impact

• JDA box has tested the enclosures according to IEC 529 or EN 60529 and EN 50298.

TEST TEST TESTIP IP IP

IK impact testFirst No. Protection against solid

IP (International Protection) TEST

0

1

2

3

4

5

6

0

1

2

3

4

5

6

7

8

0

01

05

06

07

08

09

10

JDA box Ingress Protection GradeWater, dust-proof grade IP66/67, Degree of strength IK07/08


It has few decolorization and discoloration even used for a long time at outside owing toaddition of Ultraviolet Stabilizer.It protects electric/eletronic instruments by using the material with addition of static electricityprotecting material.It is easy to make without breakage in hole and press process and it is very strong againstoutside impact as it is made of high impact resistant material.We can supply optimized products which will be made of ordered material you requestconsidering purpose and area used besides standard spectification.

ABS (Grey color) : 94-HB(Standard) or 94-V-O (Options applied for terminal block)ABS (Garish Blue color) : 94-5VB or 94-V-OPC/ABS: 94-5VAPC (Transparent) : 94-HB(Standard) or 94-V-O (Options applied for terminal block)PC (Grey) : 94-V-O

ABS :Acrylonitrile Butadiene StyrenePC/ABS :Polycarbonate+ Acrylonitrile Butadiens StyrenePC (Transparent) : PolycarbonatePC (Grey) : Polycarbonate or Polycarbonate+ Glass FiberPBT/PC: Polybutylene Terephthalate + Polycarbonate

JDA-AGP, AGH, AGS, AGM: Cover(ABS), Base(ABS)JDA-PGP, PGH, PGS, PGM: Cover(PC/ABS), Base(PC/ABS)JDA-CGP, CGH, CGS, CGM: Cover(PC), Base(PC)

JOA-ATP, ATH, ATS, ATM: Cover(PC), Base(ABS)JDA-PTP, PTH, PTS, PTM: Cover(PC), Base(PC/ABS)JDA-CTP, CTH, CTS, CTM: Cover(PC), Base(PC)

Features of plastic material of JDA box

Combustion retardant property of JDA box plastic material

Materials of JDA plastic products

Plastic materials by model

1.

2.

3.

4.


Characteristics of JDA box plastic enclosureP series-draw latch,integrated hinge

P series-roof function

H series-SUS Latch

H series-SUS Hinge

H series-Rubber washer

S series-Cover bolf connecting part

S series-Slide marking

S series-General marking

M series-Screw type

Bracket attachment pret

SUS bracket

Back panel connecting part

Plastic Back Panel

Key ring

Lock

Plastic lock

P series-draw latch lock

Gasket

It is very strong,easy to remove cover and con-venient to make hole or print as main parts of draw latch are made of stainless steel andhinge is made of plastic in integrated type.

It is protruded at base. It protects penet-ration of water at ordinary times and penet-ration of dust when opening/closing the cover.

It prevents loosening by vibration etc.It has double lock system

To ensure durability sus hinge has variousapplication to each size of enclosure

It is used for water proofing or dust proofing in installation of hinge,draw latch or other parts.

It was made to make hold only with small. drill in installation of hinge or draw latch.

It has excellent airtightness due to accurate puncture on marking part in installation of hinge or draw latch

It is designed to have lower surface of the cover considering attachment of mambrace keyboard.

It is strong as screw thread was made in injection molding.

If helps to fix the box tightly as brass insert is inserted in injection molding

You can use this bracket to fix the box at the wall

Inner panel equipped with heavy parts can be fixed tightly as brass insert is inserted in injection molding

It is easy to make hole and it has excellent insulation properly. It is made to be strong with ABS material.

It can hang a lock on enclosure.

Embedded lock

Water proof lock

It is intergrated with draw and key lock for P type

It has excellent water and dust proofing perfomance as it injects gasket solution with super precise CNC robot machine


JDA– H–222712JDA– H–272212JDA– H–203015JDA– H–302015JDA– H–203018JDA– H–302018JDA– H–253515JDA– H–352515JDA– H–304015JDA– H–403015JDA– H–304018JDA– H–403018JDA– H–354516JDA– H–453516JDA– H–354520JDA– H–453520JDA– H–405020JDA– H–504020JDA– H–406023JDA– H–604023

JDA– H–191913JDA– H–192813

P Series

P Series H Series - Medium and large size


MODEL Width×Length×Heihht




350×450×120350×450×160350×450×200400×500×160400×500×200400×600×180400×600×230530×630×185530×630×255530×730×185530×730×255630×830×185630×830×285

225×275×120275×225×120200×300×150300×200×150200×300×180300×200×180250×350×150350×250×150300×400×150400×300×150300×400×180400×300×180350×450×160450×350×160350×450×200450×350×200400×500×200500×400×200400×600×230600×400×230

190×190×130190×280×130

90×120× 7090×120× 85

100×150× 70100×150× 85110×210× 75110×210×100110×260× 75110×260×100135×155× 85135×185× 85135×185×100150×150× 90150×150×120160×210×100160×210×130160×260×100160×260×130170×220×110170×270×110190×280×100190×280×140200×300×130200×300×150200×300×180210×210×100210×210×130250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×120300×400×150300×400×180350×350×150350×350×180

How to choose JDA box's products

JDA– P–354512JDA– P–354516JDA– P–354520JDA– P–405016JDA– P–405020JDA– P–406018JDA– P–406023JDA– P–506018JDA– P–506025JDA– P–507018JDA– P–507025JDA– P–608018JDA– P–608028

JDA– P–091207JDA– P–091208JDA– P–101507JDA– P–101508JDA– P–112107JDA– P–112110JDA– P–112607JDA– P–112610JDA– P–131508JDA– P–131808JDA– P–131810JDA– P–151509JDA– P–151512JDA– P–162110JDA– P–162113JDA– P–162610JDA– P–162613JDA– P–172211JDA– P–172711JDA– P–192810JDA– P–192814JDA– P–203013JDA– P–203015JDA– P–203018JDA– P–212110JDA– P–212113JDA– P–253515JDA– P–253518JDA– P–282813JDA– P–283813JDA– P–303015JDA– P–303018JDA– P–304012JDA– P–304015JDA– P–304018JDA– P–353515JDA– P–353518


JDA– H–281913JDA– H–192818JDA– H–281918JDA– H–193813JDA– H–381913JDA– H–193818JDA– H–381918JDA– H–282813JDA– H–283413JDA– H–342813JDA– H–283813JDA– H–382813JDA– H–283818JDA– H–382818JDA– H–285613JDA– H–562813JDA– H–334318JDA– H–433318JDA– H–385618JDA– H–563818






MODEL Width×Length×Heihht MODEL WidthxLengthxHeihht




280×190×130190×280×180280×190×180190×380×130380×190×130190×380×180380×190×180280×280×130280×340×130340×280×130280×380×130380×280×130280×380×180380×280×180280×560×130560×280×130330×430×180430×330×180380×560×180560×380×180

JDA– H–151510JDA– H–152007JDA– H–201507JDA– H–152010JDA– H–201510JDA– H–152013JDA– H–201513JDA– H–152016JDA– H–201516JDA– H–152510JDA– H–251510JDA– H–152513JDA– H–251513JDA– H–202010JDA– H–202013JDA– H–202016

JDA– S–191913JDA– S–192813JDA– S–192818JDA– S–193813JDA– S–193818JDA– S–282813JDA– S–283413JDA– S–283813JDA– S–283818JDA– S–285613JDA– S–334318JDA– S–385618

150×150×100150×200× 75200×150× 75150×200×100200×150×100150×200×130200×150×130150×200×160200×150×160150×250×100250×150×100150×250×130250×150×130200×200×100200×200×130200×200×160

190×190×130190×280×130190×280×180190×380×130190×380×180280×280×130280×340×130280×380×130280×380×180280×560×130330×430×180380×560×180

JDA– S–050604JDA– S–050605JDA– S–060905JDA– S–071005

50× 65×4550× 65×5565× 95×5575×105×55

JDA– H–081107JDA– H–110807JDA– H–081108JDA– H–110808JDA– H–081307JDA– H–130807JDA– H–081308JDA– H–130808JDA– H–081807JDA– H–180807JDA– H–081808JDA– H–180808JDA– H–082507JDA– H–250807JDA– H–082508JDA– H–250808JDA– H–101007JDA– H–101010JDA– H–121207JDA– H–121210JDA– H–121707JDA– H–171207JDA– H–121710JDA– H–171210JDA– H–141709JDA– H–171409JDA– H–142309JDA– H–231409JDA– H–151507

80×110× 70110× 80× 70 80×110× 85110× 80× 85 80×130× 70130× 80× 70 80×130× 85130× 80× 85 80×180× 70180× 80× 70 80×180× 85180× 80× 85 80×250× 70250× 80× 70 80×250× 85250× 80× 85100×100× 75100×100×100125×125× 75125×125×100125×175× 75175×125× 75125×175×100175×125×100140×170× 95170×140× 95140×230× 95230×140× 95150×150× 75



Aluminium Box

M Series

Dual door





JDA– S–080806JDA– S–081104JDA– S–081107JDA– S–081108JDA– S–081307JDA– S–081308JDA– S–081605JDA– S–081608JDA– S–081807JDA– S–081808JDA– S–082507JDA– S–082508JDA– S–101007JDA– S–101010JDA– S–101807JDA– S–102007JDA– S–102307JDA– S–121207JDA– S–121210JDA– S–121707JDA– S–121710JDA– S–141709JDA– S–142309JDA– S–151507JDA– S–151510JDA– S–152007JDA– S–152010JDA– S–152013JDA– S–152016JDA– S–152510JDA– S–152513JDA– S–161607JDA– S–202010JDA– S–202013JDA– S–202016

JDA– M–081303JDA– M–081306JDA– M–081307JDA– M–081308JDA– M–081310JDA– M–081312JDA– M–131303JDA– M–131306JDA– M–131803JDA– M–131806JDA– M–151806JDA– M–181806JDA– M–181807JDA– M–181810JDA– M–181812JDA– M–182507JDA– M–182510JDA– M–182512

JDA– P–203013JDA– P–203015JDA– P–203018JDA– P–253515JDA– P–253518JDA– P–282813JDA– P–283813JDA– P–303015JDA– P–303018JDA– P–304015JDA– P–304018JDA– P–354516JDA– P–354520JDA– P–405016JDA– P–405020JDA– P–405020JDA– P–406018JDA– P–406018JDA– P–406023JDA– P–506018JDA– P–506025

80× 80× 60 80×110× 45 80×110× 70 80×110× 85 80×130× 70 80×130× 85 80×160× 55 80×160× 85 80×180× 70 80×180× 85 80×250× 70 80×250× 85100×100× 75100×100×100100×185× 70100×200× 70100×230× 70125×125× 75125×125×100125×175× 75125×175×100140×170× 95140×230× 95150×150× 75150×150×100150×200× 75150×200×100150×200×130150×200×160150×250×100150×250×130160×160× 70200×200×100200×200×130200×200×160

64× 98× 34 80× 75× 57 80×125× 57 80×175× 57 80×250× 57100×100× 80100×160× 80120×122× 80120×220× 80120×220× 90150×132× 90160×160× 90160×260× 90180×180×100230×200×100

80×130× 35 80×130× 60 80×130× 75 80×130× 85 80×130×100 80×130×125130×130× 35130×130× 60130×180× 35130×180× 60150×180× 60180×180× 60180×180× 75180×180×100180×180×125160×255× 75180×255×100180×255×125

200×300×130200×300×150200×300×180250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×150300×400×180350×450×160350×450×200400×500×160400×500×200400×500×200400×600×180400×600×180400×600×230530×630×185530×630×255

JDA–AL–061003JDA–AL–080806JDA–AL–081306JDA–AL–081806JDA–AL–082506JDA–AL–101008JDA–AL–101608JDA–AL–121208JDA–AL–122208JDA–AL–122209JDA–AL–151309JDA–AL–161609JDA–AL–162609JDA–AL–181810JDA–AL–232011

JDA Aluminium Die Casting box


MODEL Width×Lebgtg×Height

MODEL Width×Lebgth×HeightJDA aluminium housing for inserting Card

JDA–MPG(Φmm) MODEL (Φmm) MODEL

(Φmm) MODEL (Φmm) MODEL










Article no Article no Article no Article no

Article no Article no Article no Article no

JDA–PKM–P

JDA–HSM–EX–P

JDA–RG–PG

JDA–M

JDA–BP–M

JDA–MM

JDA–SP–PG

JDA–SP–M JDA–MSP–PG

JDA–PG

JDA–PG–L

JDA–BP–PG

JDA–MSP–PG JDA–HP–PG JDA–DPM–P

JDA–HSK–EX–P

250×350×160250×350×190350×450×130350×450×170350×450×210

GD–253516GD–253519GD–354513GD–354517GD–354221

JDA–ALC–111609JDA–ALC–172011

JDA–MPG– 7JDA–MPG– 9JDA–MPG–11JDA–MPG–13JDA–MPG–16

JDA–PKM–P7JDA–PKM–P9

JDA–HSK–EX–P7JDA–HSK–EX–P9JDA–HSK–EX–P11JDA–HSK–EX–P13JDA–HSK–EX–P16

JDA–HSM–EX–P7JDA–HSM–EX–P9JDA–HSM–EX–P11JDA–HSM–EX–P13JDA–HSM–EX–P16

JDA–RG–PG7JDA–RG–PG9JDA–RG–PG11JDA–RG–PG16

JDA–M–12JDA–M–16JDA–M–20JDA–M–25

JDA–BP–M–12JDA–BP–M–16

JDA–BP–M–20JDA–BP–M–25

JDA–MM–12JDA–MM–16JDA–MM–20JDA–MM–25

JDA–SP–PG – 7JDA–SP–PG – 9JDA–SP–PG – 11JDA–SP–PG –13.5JDA–SP–PG – 16JDA–SP–PG – 21JDA–SP–PG – 29JDA–SP–PG – 36JDA–SP–PG – 42JDA–SP–PG – 48

JDA–MSP–PG – 7JDA–MSP–PG – 9JDA–MSP–PG – 11JDA–MSP–PG –13.5JDA–MSP–PG – 16JDA–MSP–PG – 21JDA–MSP–PG – 29JDA–MSP–PG – 36JDA–MSP–PG – 42JDA–MSP–PG – 48

JDA–HP–PG 8JDA–HP–PG10JDA–HP–PG13JDA–HP–PG16JDA–HP–PG19JDA–HP–PG22JDA–HP–PG26JDA–HP–PG30

JDA–SP–M–12JDA–SP–M–16JDA–SP–M–18JDA–SP–M–20JDA–SP–M–22JDA–SP–M–25

JDA–PG–7–GJDA–PG–9–GJDA–PG–11–GJDA–PG–13.5–GJDA–PG–16–GJDA–PG–19–GJDA–PG–21–G

JDA–PG–7L–GJDA–PG–9L–GJDA–PG–11L–G

JDA–BP–PG7JDA–BP–PG9JDA–BP–PG11

JDA–BP–PG13.5JDA–BP–PG16JDA–BP–PG21

3.5~64~85~10

3~5.58~4.56~10

JDA–PG–13.5L–GJDA–PG–16L–G

6~1210~14

7~12.58.5~1412.5~18

JDA–PG–25–GJDA–PG–29–GJDA–PG–36–GJDA–PG–42–GJDA–PG–48–GJDA–PG–63–G

3~64~85~106~1210~1412~1513~18

15~1918~2522~3230~3834~4442~50

JDA–MSP–M 7JDA–MSP–M 9JDA–MSP–M 11JDA–MSP–M13.5JDA–MSP–M 16JDA–MSP–M 21

JDA–SP–M–27JDA–SP–M–32JDA–SP–M–40JDA–SP–M–50JDA–SP–M–63

JDA–MSP–M29JDA–MSP–M36JDA–MSP–M42JDA–MSP–M48

JDA–DPM–P 7JDA–DPM–P 9JDA–DPM–P11JDA–DPM–P13JDA–DPM–P16JDA–DPM–P21JDA–DPM–P29JDA–DPM–P36JDA–DPM–P42JDA–DPM–P48

JDA–MM–32JDA–MM–40JDA–MM–50JDA–MM–63

JDA–M–32JDA–M–40JDA–M–50JDA–M–63

JDA–RG–PG21JDA–RG–PG29JDA–RG–PG36

JDA–HSK–EX–P21JDA–HSK–EX–P29JDA–HSK–EX–P36JDA–HSK–EX–P42JDA–HSK–EX–P48

JDA–HSM–EX–P21JDA–HSM–EX–P29JDA–HSM–EX–P36JDA–HSM–EX–P42JDA–HSM–EX–P48

JDA–PKM– P11JDA–PKM– P13

JDA–MPG–21JDA–MPG–29JDA–MPG–36JDA–MPG–42JDA–MPG–48

13~1818~2522~3222~3837~44

3~6.54~8

5~106~12

8~14

6~88~10

3~6.54~8

5~106~128~14

3~6.54~8

5~106~128~14

3~55~7

7~1010~14

3~6.54~8

6~1213~18

3~6.54~8

6~1213~18

3~6.54~8

13~1818~2522~3230~3837~44

13~1818~2522~3230~3837~44

14~2020~2626~35

15~2522~3232~3837~44

15~2518~2532~3837~44

6~1213~18

10~1212~14

111.5×166×91.5 173×206×113

All - In - One - Dual door

JDA box aluminium housing for inserting card


90×120× 70 90×120× 85100×150× 70100×110× 85110×210× 75110×210×100100×260× 75110×260×100135×155× 85135×185× 85135×185×100150×150× 90150×150×120160×210×100160×210×130160×260×100160×260×130170×220×110170×270×110190×280×100190×280×140200×300×130200×300×150200×300×180210×210×100210×210×130250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×120300×400×150300×400×180350×350×150350×350×180350×450×120350×450×160350×450×200400×500×160400×500×200400×600×180400×600×230530×630×185530×630×255530×730×185530×730×255630×830×185630×830×285

9090100100110110110110135135135150150160160160160170170190190200200200210210250250280280300300300300300350350350350350400400401401530530530530630630

77.577.587.587.587.787.787.787.7115108108130130137137144.6144.6149.6149.6173.5173.5181.8181.8181.8192.3192.3231.8231.8264.1264.1283.3283.3275.5275.5275.5333.8333.8325.4325.4325.4370.5370.5370.5370.5487.4487.4487.4487.4581.9581.9

50506060707070701059595120120120120120120132132148148152152152170170202202238238252252252252252302302300300300352352352352462462462462562562

0000000000000000000120120129129129120120180180210210230230228228228270270274274274328328328328426426426426526526

128.4128.4158.4158.4218.4218.4268.4268.4150193.4193.4150150218.4218.4268.4268.4228.4278.4288.4288.4308.4308.4308.4218.4218.4358.4358.4288.4388.4305.4308.4408.4408.4408.4358.4358.4457.4457.4457.4511.4511.4611.4611.4641.4641.4741.4741.4841.4841.4

8080110110170170220220119.3145145120120170170220220182232238238252252252170170302302238338252252352352352302302400400400452452552552562562662662762762

69699999158158208208110140140110110160160210210160210210210226226226150150271271210310219219325325325270270365365365428428525525526526626626726726

5065506555805580656580701007510575105808070110100120150751051201501001001201509012015012015090130170130170150200150220150220150250

2020202020202020202020202025252525303030303030302525303030303030303030303030303030303030353535353535

51.566.551.566.556.581.556.581.567.567.582.571.5101.581.5111.585.5111.59393108.5128.5108128.5158.581.5111.5130160108108131.5161.598.5128.5158.513216298138178137178158208163233163233163253

P Series

The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel's mounting plate.

Division W1 W2 W3 W4 H1 H2 H3 D1 D2 D3SIZE

Dimension ( allowable error ± 1mm)


Model and size

90×120× 7090×120× 85

100×150× 70100×150× 85110×210× 75110×210×100110×260× 75110×260×100135×155× 85135×185× 85135×185×100150×150× 90150×150×120160×210×100160×210×130160×260×100160×260×130170×220×110170×270×110190×280×100190×280×140200×300×130200×300×150200×300×180210×210×100210×210×130250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×120300×400×150300×400×180350×350×150350×350×180350×450×120350×450×160350×450×200400×500×160400×500×200400×600×180400×600×230530×630×185530×630×255530×730×185530×730×255630×830×185630×830×285

0912S0912S1015S1015S112151121S1126S1126S1315S1318S1318S1515S1515S1621S1621S1626S1626S1722S1727S1928S1928S2030S2030S2030S2121S2121S2535S2535S2828S2838S3030S3030S3040S3040S3040S3535S3535S3545S354553545S4050S4050S4060S4060S5060S5060S5070S5070S6080S6080S

0912P0912P1015P1015P1121P1121P1126P1126P1315P1318P1318P1515P1515P1621P1621P1626P1626P1722P1727P1928P1928P2030P2030P2030P2121P2121P2535P2535P2828P2838P3030P3030P3040P3040P3040P3535P3535P3545P3545P3545P4050P4050P4060p4060P5060P5060P5070P5070P

6565656588888585101113113123123129129129129129129159159166166166179179216216248248262262265265265320320306306306358358358358450450450450550550

9595115115189189232232126161161123123179179224224179224248248266266266179179316316248348262262365365365320320407407407458458558558555555655655755755

1.It is designed to prevent the penetration of rain or dust perfectly double as roof is protruded from top and bottom of the base.2.It is easy to separate cover and base so that user can attach or detach them for processing and printing.3.Insert hinge into the product and hinge connecting pin and important parts of draw latch are made of stainless steel so that it is very strong and corrosion resistant.

Product Characteristics

Accessories

Model and size(cover included) Product model Plate Model Plate Size Width×Length

×Height(mm)

Width×Length×Height(inch)

SteeImounting

plate 1.6mm

Plasticmountingplate 3-4.5mm

ABS PC/ABS PCM1 M2-Grey Cover G

-Transparent CoverT-Grey Cover G


-Transparent CoverT 3.54× 4.72× 2.76 3.54× 4.72× 3.35 3.94× 5.91× 2.76 3.94× 5.91× 3.35 4.33× 8.27× 2.95 4.33× 8.27× 3.94 4.33×10.24× 2.95 4.33×10.24× 3.94 5.12× 5.91× 3.35 5.12× 7.09× 3.35 5.12× 7.09× 3.94 5.91× 5.91× 3.54 5.91× 5.91× 4.72 6.3 × 8.27× 3.94 6.3 × 8.27× 5.12 6.3 ×10.24× 3.94 6.3 ×10.24× 5,12 6.69× 8.66× 4.33 6.69×10.63× 4.33 7.48×11.02× 3.94 7.48×11.02× 5.51 7.87×11.81× 5.12 7.87×11.81× 5.91 8.27× 8.27× 3.94 8.27× 8.27× 5.12 7.87×11.81× 7.09 9.84×13.78× 5.91 9.84×13.78× 7.0911.02×11.02× 5.1211.02×14.96× 5.1211.81×11.81× 5.9111.81×11.81× 7.0911.81×15.75× 4.7211.81×15.75× 5.9111.81×15.75× 7.0913.78×13.78× 5.9113.78×13.78× 7.0913.78×17.72× 4.7213.78×17.72× 6.3013.78×17.72× 7.8715.75×19.69× 6.3015.75×19.69× 7.8715.75×23.62× 7.0915.75×23.62× 9.0620.87×24.80× 7.2820.87×24.80×10.0420.87×28.74× 7.2820.87×28.74×10.0424.80×32.68× 7.2824.80×32.68×11.22

JDA-A P-091207JDA-A P-091208JDA-A P-101507JDA-A P-101508JDA-A P-112107JDA-A P-112110JDA-A P-112607JDA-A P-112610JDA-A P-131508JDA-A P-131808JDA-A P-131810JDA-A P-151509JDA-A P-151512JDA-A P-162110JDA-A P-162113JDA-A P-162610JDA-A P-162613JDA-A P-172211JDA-A P-172711JDA-A P-192810JDA-A P-192814JDA-A P-203013JDA-A P-203015JDA-A P-203018JDA-A P-212110JDA-A P-212113JDA-A P-253515JDA-A P-253518JDA-A P-282813JDA-A P-283813JDA-A P-303015JDA-A P-303018JDA-A P-304012JDA-A P-304015JDA-A P-304018JDA-A P-353515JDA-A P-353518JDA-A P-354512JDA-A P-354516JDA-A P-354520JDA-A P-405016JDA-A P-405020JDA-A P-406018JDA-A P-406023JDA-A P-506018JDA-A P-506025JDA-A P-507018JDA-A P-507025JDA-A P-608018JDA-A P-608028

JDA-P P-091207JDA-P P-091208JDA-P P-101507JDA-P P-101508JDA-P P-112107JDA-P P-112110JDA-P P-112607JDA-P P-112610JDA-P P-131508JDA-P P-131808JDA-P P-131810JDA-P P-151509JDA-P P-151512JDA-P P-162110JDA-P P-162113JDA-P P-162610JDA-P P-162613JDA-P P-172211JDA-P P-172711JDA-P P-192810JDA-P P-192814JDA-P P-203013JDA-P P-203015JDA-P P-203018JDA-P P-212110JDA-P P-212113JDA-P P-253515JDA-P P-253518JDA-P P-282813JDA-P P-283813JDA-P P-303015JDA-P P-303018JDA-P P-304012JDA-P P-304015JDA-P P-304018JDA-P P-353515JDA-P P-353518JDA-P P-354512JDA-P P-354516JDA-P P-354520JDA-P P-405016JDA-P P-405020JDA-P P-406018JDA-P P-406023JDA-P P-506018JDA-P P-506025JDA-P P-507018JDA-P P-507025JDA-P P-608018JDA-P P-608028

JDA-C P-091207JDA-C P-091208JDA-C P-101507JDA-C P-101508JDA-C P-112107JDA-C P-112110JDA-C P-112607JDA-C P-112610JDA-C P-131508JDA-C P-131808JDA-C P-131810JDA-C P-151509JDA-C P-151512JDA-C P-162110JDA-C P-162113JDA-C P-162610JDA-C P-162613JDA-C P-172211JDA-C P-172711JDA-C P-192810JDA-C P-192814JDA-C P-203013JDA-C P-203015JDA-C P-203018JDA-C P-212110JDA-C P-212113JDA-C P-253515JDA-C P-253518JDA-C P-282813JDA-C P-283813JDA-C P-303015JDA-C P-303018JDA-C P-304012JDA-C P-304015JDA-C P-304018JDA-C P-353515JDA-C P-353518JDA-C P-354512JDA-C P-354516JDA-C P-354520JDA-C P-405016JDA-C P-405020JDA-C P-406018JDA-C P-406023JDA-C P-506018JDA-C P-506025JDA-C P-507018JDA-C P-507025JDA-C P-608018JDA-C P-608028

Steel mounting plate(Zinc plating)

Plastic mounting plate(ABS)

Key ring(K40)

Locker(SK)

Plastic locker(PK)

Wall mounting bracket(B40, B50, B60)

Vent(V60, V80)

Plastic bracket(PB20, 25)

JDA-PSK


H Series - Medium and large size

Dimension ( allowable error± 1mm) The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel's mounting plate.

DivisionW1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size

225×275×120275×225×120200×300×150300×200×150200×300×180300×200×180250×350×150350×250×150300×400×150400×300×150300×400×180400×300×180350×450×160450×350×160350×450×200450×350×200400×500×200500×400×200400×600×230600×400×230

225276200300200300250350300400300400350450350450402502402602

219270180280180280230330280380280380323423323423375475375575

204.6234152252152252206306252352252352298398298398352452352552

183210129226129226180269230325230325276376276376328428328525

276225300200300200350250400300400300450350450350502402602402

270219280180280180330230380280380280423323423323475375575375

234204252152252152306206352252352252398298398298452352552352

210183226129226129269180325230325230376276376276428328525328

9090

120120150150120120120120150150130130170170170170200200

3030303030303030303030303030303030303030

9898

128.5128.5158.5158.5128.5128.5128128158158138138178178178178208208


1. It will not be damaged even using for a long time because stainless steel hinge and draw latch are equipped.

2. It secures perfect airtightess by preventing sink down when opening or closing by increasing the sizes of hinge and draw latch by size increasing of the products.

3. It can be used in inferior dangerous industrial field by using strong material and structure.


Accessories

Model and sizeModel and size(cover included) Product model Plate Model Plate Size

Width×Length×Height

(mm)


SteeImounting

plate 1.6mm

Plasticmountingplate 3-4.5mm

ABS PC/ABS PC

M1 M2-Grey Cover G-Transparent CoverT

-Grey Cover G-Transparent CoverT

-Grey Cover G-Transparent CoverT

225×275×120275×225×120200×300×150300×200×150200×300×180300×200×180250×350×150350×250×150300×400×150400×300×150300×400×180400×300×180350×450×160450×350×160350×450×200450×350×200400×500×200500×400×200400×600×230600×400×230

2227S2227S2030S2030S2030S2030S2535S2535S3040S3040S3040S3040S3545S3545S3545S3545S4050S4050S4060S4060S

600×400×230 is for non water proof product.

2227P2227P2030P2030P2030P2030P2535P2535P3040P3040P3040P3040P3545P3545P3545P3545P4050P4050P4060P4060P

190190166166166166216216265265265265306306306306358358358358

242242266266266266316316365365365365407407407407458458558558

8.86×10.83×4.7210.83×8.86×4.727.87×11.81×5.9111.81×7.87×5.917.87×11.81×7.0911.81×7.87×7.099.84×13.78×5.9113.78×9.84×5.9111.81×15.75×5.9115.75×11.81×5.9111.81×15.75×7.0915.75×11.81×7.0913.78×17.72×6.3017.72×13.78×6.3013.78×17.72×7.8717.72×13.78×7.8715.75×19.69×7.8719.69×15.75×7.8715.75×23.62×9.0623.62×15.75×9.06

JDA-A H-222712JDA-A H-272212JDA-A H-203015JDA-A H-302015JDA-A H-203018JDA-A H-302018JDA-A H-253515JDA-A H-352515JDA-A H-304015JDA-A H-403015JDA-A H-304018JDA-A H-403018JDA-A H-354516JDA-A H-453516JDA-A H-354520JDA-A H-453520JDA-A H-405020JDA-A H-504020JDA-A H-406023JDA-A H-604023

JDA-P H-222712JDA-P H-272212JDA-P H-203015JDA-P H-302015JDA-P H-203018JDA-P H-302018JDA-P H-253515JDA-P H-352515JDA-P H-304015JDA-P H-403015JDA-P H-304018JDA-P H-403018JDA-P H-354516JDA-P H-453516JDA-P H-354520JDA-P H-453520JDA-P H-405020JDA-P H-504020JDA-P H-406023JDA-P H-604023

JDA-C H-222712JDA-C H-272212JDA-C H-203015JDA-C H-302015JDA-C H-203018JDA-C H-302018JDA-C H-253515JDA-C H-352515JDA-C H-304015JDA-C H-403015JDA-C H-304018JDA-C H-403018JDA-C H-354516JDA-C H-453516JDA-C H-354520JDA-C H-453520JDA-C H-405020JDA-C H-504020JDA-C H-406023JDA-C H-604023



Key ring(K40)

Locker(SK)

Plastic locker(PK)

Wall mounting bracket(B40, B50, B60)

Draw Latch(H65, M75)

Hinge(H65, H75)

Vent(V60, V80)




The dimension of mounting plate is based on the plastic mounting plateand the dimension of around bracket is steel mounting plate.

DivisionW1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size190190280190280190380190380280280340280380280380280560330430380560

170170266170266170359170359265259319266359266359266535310410366535

165165255165255165355165355365

254.7315255355255355255505266386355505

120120210120210120310120310210210270210310210310210490250350310490

190280190280190380190380190280340280380280380280560280430330560360

170266170266170359170360170210319259359260359266535266410310535366

165255165255165355165355165255315

254.7315255355255505255386266505355

120210120210210310120310120210270210310210310210490210350250490310

989898

1501509898

15015098

1001009898

148148100100150150150150

30303030303030303030303030303030303030303030

112112112159159109109159159112111111111111

161.5161.5120120160160160160

190×190×130190×280×130280×190×130190×280×180280×190×180190×380×130380×190×130190×380×180380×190×180280×280×130280×340×130340×280×130280×380×130380×280×130280×380×180380×280×180280×560×130560×280×130330×430×180430×330×180380×560×180560×380×180

Dimension ( allowable error± 1mm)



Accessories

1. It will not be damaged even using for a long time because stainless steel hinge and draw latch are equipped.

2. It has excellent airghtness as it was designed considering bolt open/close type. hinge made of stainless steel and equipment of draw latch.

3. User make hole on the place of equipment simply.

Model and sizeModel and size(cover included) Product model Plate Model Plate Size

Width×Length×Height

(mm)


SteeImounting

plate 1.6mm

Plasticmounting

plate 3-4.5mm




-Transparent CoverT1919S1928S2819S1928S2819S1938S3819S1938S3819S2828S2834S3428S2838S3828S2838S3828S2856S5628S3343S4333S3856S5638S

159159159159159159159159159248248308248248248348

(230)(232)(295)(295)(345)(345)

159248248248248348348348348248308248348348348348

(535)(535)(395)(395)(535)(535)

1919P1928P2819P1928P2819P1938P3819P1938P3819P2828P2834P3428P2838P3828P2838P3828P

3343 P4333 P

560×280×130, 580×380×180 is for non water proof product.



Key ring(K40)

Locker(SK)

Plastic locker(PK)

Wall mounting bracket(B50)

Draw Latch(H65)

Hinge(H65)

Vent(V60, V80)

Stopper (M22)

Plastic bracket(PB25)

190×190×130190×280×130280×190×130190×280×180280×190×180190×380×130380×190×130190×380×180380×190×180280×280×130280×340×130340×280×130280×380×130380×280×130280×380×180380×280×180280×560×130560×280×130330×430×180430×330×180380×560×180560×380×180

7.48× 7.48×5.12 7. 48×11.02×5.1211.02× 7.48×5.12 7.48×11.02×7.0911.02× 7.48×7.09 7.48×14.96×5.1214.96× 7.48×5.12 7.48×14.96×7.0914.96× 7.48×7.0911.02×11.02×5.1211.02×13.39×5.1213.39×11.02×5.1211.02×14.96×5.1214.96×11.02×5.1211.02×14.96×7.0914.96×11.02×7.0911.02×22.05×5.1222.05×11.02×5.1212.99×16.93×7.0916.93×12.99×7.0914.96×22.05×7.0922.05×14.96×7.09

JDA-A H-191913JDA-A H-192813JDA-A H-281913JDA-A H-192818JDA-A H-281918JDA-A H-193813JDA-A H-381913JDA-A H-193818JDA-A H-381918JDA-A H-282813JDA-A H-283413JDA-A H-342813JDA-A H-283813JDA-A H-382813JDA-A H-283818JDA-A H-382818JDA-A H-285613JDA-A H-562813JDA-A H-334318JDA-A H-433318JDA-A H-385618JDA-A H-563818

JDA-P H-191913JDA-P H-192813JDA-P H-281913JDA-P H-192818JDA-P H-281918JDA-P H-193813JDA-P H-381913JDA-P H-193818JDA-P H-381918JDA-P H-282813JDA-P H-283413JDA-P H-342813JDA-P H-283813JDA-P H-382813JDA-P H-283818JDA-P H-382818JDA-P H-285613JDA-P H-562813JDA-P H-334318JDA-P H-433318JDA-P H-385618JDA-P H-563818

JDA-C H-191913JDA-C H-192813JDA-C H-281913JDA-C H-192818JDA-C H-281918JDA-C H-193813JDA-C H-381913JDA-C H-193818JDA-C H-381918JDA-C H-282813JDA-C H-283413JDA-C H-342813JDA-C H-283813JDA-C H-382813JDA-C H-283818JDA-C H-382818JDA-C H-285613JDA-C H-562813JDA-C H-334318JDA-C H-433318JDA-C H-385618JDA-C H-563818



Dimension ( allowable error± 1mm)The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel mounting plate.

Division W1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size 80×110× 70110× 80× 70 80×110× 85110× 80× 85 80×130× 70130× 80× 70 80×130× 85130× 80× 85 80×180× 70180× 80× 70 80×180× 85180× 80× 85 80×250× 70250× 80× 70 80×250× 85250× 80× 85100×100× 75100×100×100125×125× 75125×125×100125×175× 75175×125× 75125×175×100175×125×100140×170× 95170×140× 95140×230× 95230×140× 95150×150× 75150×150×100150×200× 75200×150× 75150×200×100200×150×100150×200×130200×150×130150×200×160200×150×160150×250×100250×150×100150×250×130250×150×130200×200×100200×200×130200×200×160

8011080110801308013080180801808025080250100100125125127175127175143173140230150150150200150200150200150200150250150250200200200

74104741047412474124741747417474244742449494119119121169121169137167134224144144142192142192142192142192142242142242193193193

629262926211262112621626216262232622328282105105109157109157122152122212110110132182132182132182132182132232132232132132132

0800

800

1000

1000

1500

1500

2200

22000000

1400

1400

1300

190000

1600

1600

1600

1600

2100

210000

1108011080

13080

13080

18080

18080

25080

25080

100100125125175127175127173143230140150150200150200150200150200150250150250150200200200

10474

10474

12474

12474

17474

17474

24474

244749494119119169121169121167137224134144144192142192142192142192142242142242142193193193

92629262

11262

11262

16262

16262

23262

232628282

105105157109157109152122212122132132182132182132182132182132232132232132182182182

800

800

1000

1000

1500

1500

2200

2200

60607070

1400

1400

1300

1900

110110160

0160

0160

0160

0210

0210

0120120120

50505050505050505050505050505050558055805050505075757575558055558080

1101101101108080808080

110110

202035352020353520203535202035352020202025255050202020252020202020202020505020205050202050

53536868535368685353686852526767588358835858838377777777588358588383111111149149838311311382111141


Model and size

1.It will not be damaged even uaing for a long time because stainless steel hinge and draw latch are equipped. 2.Ring is equipped at correct place after processing so that it has perfect airtight and convenience to open and close. 3.We reinforce the thickness and structure to be used longer time.


Accessories

Model and size(cover included) Product model Plate Model Plate SizeWidth×Length

×Height(mm)


SteeImounting

plate 1.6mm

Plasticmounting

plate 3-4.5mm




-Transparent CoverT



Key ring(K40)

Locker(SK)

Plastic locker(PK)

Draw latch(M55)

Hinge(H55)

Stopper(M11)

Vent(V60, V80)

Vent(V60, V80)


80 × 110 × 70110 × 80 × 70 80 × 110 × 85110 × 80 × 85 80 × 130 × 70130 × 80 × 70 80 × 130 × 85130 × 80 × 85 80 × 180 × 70180 × 80 × 70 80 × 180 × 85180 × 80 × 85 80 × 250 × 70250 × 80 × 70 80 × 250 × 85250 × 80 × 85100 × 100 × 75100 × 100 × 100125 × 125 × 75125 × 125 × 100125 × 175 × 75175 × 125 × 75125 × 175 × 100175 × 125 × 100140 × 170 × 95170 × 140 × 95140 × 230 × 95230 × 140 × 95150 × 150 × 75150 × 150 × 100150 × 200 × 75200 × 150 × 75150 × 200 × 100200 × 150 × 100150 × 200 × 130200 × 150 × 130150 × 200 × 160200 × 150 × 160150 × 250 × 100250 × 150 × 100150 × 250 × 130250 × 150 × 130200 × 200 × 100200 × 200 × 130200 × 200 × 160

0811 S1108 S0811 S1108 S0813 S1308 S0813 S1308 S0818 S1808 S0818 S1808 S0825 S2508 S0825 S2508 S1010 S1010 S1212 S1212 S1217 S1712 S1217 S1712 S1417 S1714 S1423 S2314 S1515 S1515 S1520 S2015 S1520 S2015 S1520 S2015 S2020 S2020 S1525 S2515 S1525 S2515 S2020 S2020 S2020 S

0811 P1108 P0811 P1108 P0813 P1308 P0813 P1308 P0818 P1808 P0818 P1808 P0825 P2508 P0825 P2508 P1010 P1010 P1212 P1212 P1217 P1712 P1217 P1712 P1417 P1714 P1423 P2314 P1515 P1515 P1520 P2015 P1520 P2015 P1520 P2015 P2020 P2020 P1525 P2515 P1525 P2515 P2020 P2020 P2020 P

646464646565656565656565656565658282107107113113113113126126122122123123129129129129129129129129129129129129179179179

949494941151151151151651651651652352352352358282107107161161161161155155212212123123179179179179179179179179224224224224179179179

3.15 × 4.33 × 2.764.33 × 3.15 × 2.763.15 × 4.33 × 3.354.33 × 3.15 × 3.353.15 × 5.12 × 2.765.12 × 3.15 × 2.763.15 × 5.12 × 3.355.12 × 3.15 × 3.353.15 × 7.09 × 2.767.09 × 3.15 × 2.763.15 × 7.09 × 3.357.09 × 3.15 × 3.353.15 × 9.84 × 2.769.84 × 3.15 × 2.763.15 × 9.84 × 3.359.84 × 3.15 × 3.353.94 × 3.94 × 2.953.94 × 3.94 × 3.944.92 × 4.92 × 2.954.92 × 4.92 × 3.944.92 × 6.89 × 2.956.89 × 4.92 × 2.954.92 × 6.89 × 3.946.89 × 4.92 × 3.945.51 × 6.69 × 3.746.69 × 5.51 × 3.745.51 × 9.06 × 3.749.06 × 5.51 × 3.745.91 × 5.91 × 2.955.91 × 5.91 × 3.945.91 × 7.87 × 2.957.87 × 5.91 × 2.955.91 × 7.87 × 3.947.87 × 5.91 × 3.945.91 × 7.87 × 5.127.87 × 5.91 × 5.125.91 × 7.87 × 6.307.87 × 5.91 × 6.305.91 × 9.84 × 3.949.84 × 5.91 × 3.945.91 × 9.84 × 5.129.84 × 5.91 × 5.127.87 × 7.87 × 3.947.87 × 7.87 × 5.127,87 × 7.87 × 6.30

JDA-A H-081107JDA-A H-110807JDA-A H-081108JDA-A H-110808JDA-A H-081307JDA-A H-130807JDA-A H-081308JDA-A H-130808JDA-A H-081807JDA-A H-180807JDA-A H-081808JDA-A H-180808JDA-A H-082507JDA-A H-250807JDA-A H-082508JDA-A H-250808JDA-A H-101007JDA-A H-101010JDA-A H-121207JDA-A H-121210JDA-A H-121707JDA-A H-171207JDA-A H-121710JDA-A H-171210JDA-A H-141709JDA-A H-171409JDA-A H-142309JDA-A H-231409JDA-A H-151507JDA-A H-151510JDA-A H-152007JDA-A H-201507JDA-A H-152010JDA-A H-201510JDA-A H-152013JDA-A H-201513JDA-A H-152016JDA-A H-201516JDA-A H-152510JDA-A H-251510JDA-A H-152513JDA-A H-251513JDA-A H-202010JDA-A H-202013JDA-A H-202016

JDA-P H-081107JDA-P H-110807JDA-P H-081108JDA-P H-110808JDA-P H-081307JDA-P H-130807JDA-P H-081308JDA-P H-130808JDA-P H-081807JDA-P H-180807JDA-P H-081808JDA-P H-180808JDA-P H-082507JDA-P H-250807JDA-P H-082508JDA-P H-250808JDA-P H-101007JDA-P H-101010JDA-P H-121207JDA-P H-121210JDA-P H-121707JDA-P H-171207JDA-P H-121710JDA-P H-171210JDA-P H-141709JDA-P H-171409JDA-P H-142309JDA-P H-231409JDA-P H-151507JDA-P H-151510JDA-P H-152007JDA-P H-201507JDA-P H-152010JDA-P H-201510JDA-P H-152013JDA-P H-201513JDA-P H-152016JDA-P H-201516JDA-P H-152510JDA-P H-251510JDA-P H-152513JDA-P H-251513JDA-P H-202010JDA-P H-202013JDA-P H-202016

JDA-C H-081107JDA-C H-110807JDA-C H-081108JDA-C H-110808JDA-C H-081307JDA-C H-130807JDA-C H-081308JDA-C H-130808JDA-C H-081807JDA-C H-180807JDA-C H-081808JDA-C H-180808JDA-C H-082507JDA-C H-250807JDA-C H-082508JDA-C H-250808JDA-C H-101007JDA-C H-101010JDA-C H-121207JDA-C H-121210JDA-C H-121707JDA-C H-171207JDA-C H-121710JDA-C H-171210JDA-C H-141709JDA-C H-171409JDA-C H-142309JDA-C H-231409JDA-C H-151507JDA-C H-151510JDA-C H-152007JDA-C H-201507JDA-C H-152010JDA-C H-201510JDA-C H-152013JDA-C H-201513JDA-C H-152016JDA-C H-201516JDA-C H-152510JDA-C H-251510JDA-C H-152513JDA-C H-251513JDA-C H-202010JDA-C H-202013JDA-C H-202016



Dimension ( allowable error± 1mm)The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel mounting plate.

DivisionW1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size

190×190×130190×280×130190×280×180190×380×130190×380×180280×280×130280×340×130280×380×130280×380×180280×560×130330×430×180380×560×180

190190190190190280280280280280330380

170170170170170266259266266296

366

165165165165165255

254.7255255255

355

120120120120120210210210210210

310

190280280380380280340380380560430560

170266266359360266319359359535

535

165255255355355255315355355505

505

120210210310310210270310310490

490

9898

15098

15098

10098

150100150150

30303030303030303030

30

112112159109159112111111

161.5120

160


Model and size

1.Screw thread for connecting cover bolt of the base is inserted into the base in injection molding so that it has sufficient strength and not broken when tightening bolt.

2.1t is designed as 4 side sliding type to be strong against impact.


Accessories

Model and size(cover included) Product model Plate Model Plate SizeWidth×Length

×Height(mm)


SteeImounting

plate 1.6mm

Plasticmounting

plate 3-4.5mm




-Transparent CoverT



Cover bolt(standardProvide)(CB28-)

Cover bolt(optional) (CB28+)

Wall mounting bracket(B50)

Vent(V60, V80)

Plastic bracket(PB25)

190×190×130

190×280×130

190×280×180

190×380×130

190×380×180

280×280×130

280×340×130

280×380×130

280×380×180

280×560×130

330×430×180

380×560×180

1919 S

1928 S

1928 S

1938 S

1938 S

2828 S

2834 S

2838 S

2838 S

2856 S

3343 S

3856 S

159

159

159

159

159

248

248

248

248

(232)

(295)

(345)

159

248

248

348

348

248

308

348

348

(535)

(395)

(535)

1919 P

1928 P

1928 P

1938 P

1938 P

2828 P

2834 P

2838 P

2838 P

3343 P

7.48× 7.48×5.12

7.48×11.02×5.12

7.48×11.02×7.09

7.48×14.96×5.12

7.48×14.96×7.09

11.02×11.02×5.12

11.02×13.39×5.12

11.02×14.96×5.12

11.02×14.96×7.09

11.02×22.05×5.12

12.99×16.93×7.09

14.96×22.05×7.09

JDA-A S-191913

JDA-A S-192813

JDA-A S-192818

JDA-A S-193813

JDA-A S-193818

JDA-A S-282813

JDA-A S-283413

JDA-A S-283813

JDA-A S-283818

JDA-A S-285613

JDA-A S-334318

JDA-A S-385618

JDA-P S-191913

JDA-P S-192813

JDA-P S-192818

JDA-P S-193813

JDA-P S-193818

JDA-P S-282813

JDA-P S-283413

JDA-P S-283813

JDA-P S-283818

JDA-P S-285613

JDA-P S-334318

JDA-P S-385618

JDA-C S-191913

JDA-C S-192813

JDA-C S-192818

JDA-C S-193813

JDA-C S-193818

JDA-C S-282813

JDA-C S-283413

JDA-C S-283813

JDA-C S-283818

JDA-C S-285613

JDA-C S-334318

JDA-C S-385618




DivisionW1 W2 W3 H1 H2 H3 H4 D1 D2 D3

Size 50× 65× 45 50× 65× 55 65× 95× 55 75×105× 55 80× 80× 60 80×110× 45 80×110× 70 80×110× 85 80×130× 70 80×130× 85 80×160× 55 80×160× 85 80×180× 70 80×180× 85 80×250× 70 80×250× 85100×100× 75100×100×100100×185× 70100×200× 70100×230× 70125×125× 75125×125×100125×175× 75125×175×100140×170× 95140×230× 95150×150× 75150×150×100150×200× 75150×200×100150×200×130150×200×160150×250×100150×250×130160×160× 70200×200×100200×200×130200×200×160

50506575808080808080828280808080

100100100100100125125125125140140150150150150150150150150160200200200

444459697474747474747676747474749494949494

119119121121137134144144142142142142142142154193193193

373747576262626262626868626262628282828282

105105109109122122110110132132132132132132110182132132

656595

10580

110110110130130162162180180250250100100185200230125125175175173230150150200200200200250250160200200200

5959899994

104104104124124156156174174244244

9494

179194224119119169169167224144144192192192192242242154193193193

5252778762929292

112112148148162162232232

8282

167182212105105157157152212132132182182182182232232142182182182

4040657550808080

100100137137150150220220

6060

139158184

7070

140140130190110110160160160160210210110120120120

30404040452550505050407050505050558055555555805050757555805580

11011080805580

110110

151515151520203520351515203520352020151515202025502020202020202050205015202050

29.539.539.539.5432853685368386853685267588353535358835883777758835883111149831135382111141


▪Product Characteristics 1.Screw thread connecting cover bolt of the base in inserted into the base in injection molding so that it has

sufficient strength and not broken when tightening bolt.

2.lt can be used semi-permanently as we reinforced thickness

Modeland size(cover i ncluded) productmodel plate Model plate SizeABS PC/ABS PC Steel Plastic

mounting M1 M2 plate3-4.5mm1.6mm

50x 65x 45 1.97x2.56x1.77 JDA-A�S-050604 JDA-P�S-050604 JDA-C�S-050604 0506 S (52) (38) 50x 65x 55 1.97x2.56x2.17 JDA-A�S-050605 JDA-P�S-050605 JDA-C�S-050605 0506 S (52) (38)

(80) 65x 95x 55 2.56x3.74x2.17 JDA-A�S-060905 JDA-P�S-060905 JDA-C�S-060905 0609 S (50) 75x105x 55 2.95x4.13x2.17 JDA-A�S-071005 JDA-P�S-071005 JDA-C�S-071005 0710 S (60) (90) 80x 80x 60 3.15x3.15x2.36 JDA-A�S-080806 JDA-P�S-080806 JDA-C�S-080806 0808 S (65) (65) 80x110x 45 3.15x4.33x1.77 JDA-A�S-081104 JDA-P�S-081104

JDA-P�S-081107JDA-C�S-081104 0811 S 0811 P 65 95

80x110x 70 3.15x4.33x2.76 JDA-A�S-081107 JDA-C�S-081107 0811 S 0811 P 65 95 80x110x 85 3.15x4.33x3.35 JDA-A�S-081108 JDA-P�S-081108 JDA-C�S-081108 0811 S 0811 P 65 95 80x130x 70 3.15x5.12x2.76 JDA-A�S-081307 JDA-P�S-081307 JDA-C�S-081307 0813 S 0813 P 65 115 80x130x 85 3.15x5.12x3.35 JDA-A�S-081308 JDA-P�S-081308 JDA-C�S-081308 0813 S 0813 P 65 115 80x160x 55 3.15x6.30x2.17 JDA-A�S-081605 JDA-P�S-081605 JDA-C�S-081605 0816 S 0816 P 65 152 80x160x 85 3.15x6.30x3.35 JDA-A�S-081608 JDA-P�S-081608 JDA-C�S-081608 0816 S 0816 P 65 152 80x180x 70 3.15x7.09x2.76 JDA-A�S-081807 JDA-P�S-081807 JDA-C�S-081807 0818 S 0818 P 65 165 80x180x 85 3.15x7.09x3.35 JDA-A�S-081808 JDA-P�S-081808 JDA-C�S-081808 0818 S 0818 P 65 165 80x250x 70 3.15x9.84x2.76 JDA-A�S-082507 JDA-P�S-082507 JDA-C�S-082507 0825 S 0825 P 65 235 80x250x 85 3.15x9.84x3.35 JDA-A�S-082508 JDA-P�S-082508 JDA-C�S-082508 0825 S 0825 P 65 235 100x100x 75 3.94x3.94x2.95 JDA-A�S-101007 JDA-P�S-101007 JDA-C�S-101007 1010 S 1010 P 88 89 100x100x100 3.94x3.94x3.94 JDA-A�S-101010 JDA-P�S-101010 JDA-C�S-101010 1010 S 1010 P 88 89 100x185x 70 3.94x7.28x2.76 JDA-A�S-101807 JDA-C�S-101807 1018 S 1018 P (88) (174)100x200x 70 3.94x7.87x2.76 JDA-A�S-102007 JDA-P�S-102007 JDA-C�S-102007 1020 S (88) (189)100x230x 70 3.94x9.06x2.76 JDA-A�S-102307 JDA-C�S-102307 1023 S (88) (219)125x125x 75 4.92x4.92x2.95 JDA-A�S-121207 JDA-P�S-121207 JDA-C�S-121207 1212 S 1212 P 101 102125x125x100 4.95x4.92x3.94 JDA-A�S-121210 JDA-P�S-121210 JDA-C�S-121210 1212 S 1212 P 101 102125x175x 75 4.92x6.89x2.95 JDA-A�S-121707 JDA-P�S-121707 JDA-C�S-121707 1217 S 1217 P 101 156125x175x100 4.92x6.89x3.94 JDA-A�S-121710 JDA-P�S-121710 JDA-C�S-121710 1217 S 1217 P 101 156140x170x 95 5.51x6.69x3.74 JDA-A�S-141709 JDA-P�S-141709 JDA-C�S-141709 1417 S 1417 P 122 154140x230x 95 5.51x9.06x3.74 JDA-A�S-142309 JDA-P�S-142309 JDA-C�S-142309 1423 S 1423 P 122 211150x150x 75 5.91x5.91x2.95 JDA-A�S-151507 JDA-P�S-151507 JDA-C�S-151507 1515 S 1515 P 134 134 150x150x100 5.91x5.91x3.94 JDA-A�S-151510 JDA-P�S-151510 JDA-C�S-151510 1515 S 1515 P 134 134 150x200x 75 5.91x7.87x2.95 JDA-A�S-152007 JDA-P�S-152007 JDA-C�S-152007 1520 S 1520 P 136 186 150x200x100 5.91x7.87x3.94 JDA-A�S-152010 JDA-C�S-152010 1520 S 1520 P 136 186 150x200x130 5.91x7.87x5.12 JDA-A�S-152013 JDA-P�S-152013 JDA-C�S-152013 1520 S 1520 P 129 179 150x200x160 5.91x7.87x6.30 JDA-A�S-152016 JDA-P�S-152016 JDA-C�S-152016 2020 S 2020 P 129 179 150x250x100 5.91x9.84x3.94 JDA-A�S-152510 JDA-P�S-152510 JDA-C�S-152510 1525 S 1525 P 136 235 150x250x130 5.91x9.84x5.12 JDA-A�S-152513 JDA-P�S-152513

JDA-P�S-161607 JDA-C�S-152513 1525 S 1525 P 136 235

160x160x 70 6.30x6.30x2.76 JDA-A�S-161607 JDA-C�S-161607 1616 S 134 134 200x200x100 7.87x7.87x3.94 JDA-A�S-202010 JDA-P�S-202010 JDA-C�S-202010 2020 S 2020 P 187200x200x130 7.87x7.87x5.12 JDA-A�S-202013 JDA-P�S-202013 JDA-C�S-202013 2020 S 2020 P 187200x200x160 7.87x7.87x6.30 JDA-A�S-202016 JDA-P�S-202076 JDA-C�S-202016 2020 S 2020 P 187

Steel mounting plate Plastic mounting plate Cover bolt (optiomal) Cover bolt (standard Cover bolt (standard Cover bolt (standard Wall mounting plastic bracke(PB25,20)(Zinc plating) (ABS) (CB20-) provide)(CB20) provide)(CB35) provide)(CB50) bracket (04B)

Modeland size

Accessories

JDA-P�S-101807

JDA-P�S-102307

JDA-P�S-152010

-Grey Cover -Transparent Cover



mountingplate

187187187

Width×length Width×length ×Height ×Height

(mm) (inch)


M Series


DivisionW1 W2 W3 H1 H2 H3 D1 D2 D3

Size

80×130× 35 80×130× 60 80×130× 75 80×130× 85 80×130×100 80×130×125130×130× 35130×130× 60130×180× 35130×180× 60150×180× 60180×180× 60180×180× 75180×180×100180×180×125180×255× 75180×255×100180×255×125

808080808080130130130130150180180180180180180180

6262626262112112112112132162162162162162162162162

40404040404090909090

110.5140140140140140140140

130130130130130130130130180180180180180180180255255255

112112112112112112112112162162162162162162162237237237

9090909090909090140140140140140140140

201.5201.5201.5

25506550909025502550505065901156085110

101010351035101010101010101010151515

21.546.561.571.587.5111.521.546.521.546.545.545.559.584.5109.559.584.5109.5


▪ ProductCharacteristics1.Considering attachment of membrane keyboard,this M type Box is designed to make center surface of the cover

slightlylower.

2.Screw thread for connceting cover bolt of the base is inserted into the base in injection molding so that it has sufficient strength and not broken when tightening bolt.

3.Cover is low and base is high so that it has refined and stable appearance

Steel mounting(Zinplating)

Cover bolt(standardprovide)(CB10)

Cover boll(optiomal)(CB20-)

Coverbolt(standardprovide)(CB20)

Wallmountingbracket(840)

plastic bracket(PB20)

Accessories

Modeland size(covermcluded) product model plate Model plate SizeWidth×Length

×Height (mm)


ABS PC/ABS PC SteeImounting

plate1.6mm

Plasticmounting

plate3~4.5mm

M1 M2

Modeland size




80×130× 35 3. 15× 5.12×1.38 JDA-A�M-081303 JDA-P�M-081303 JDA-C�M-081303 0813 S 0813 P (49) (98) 80×130× 60 3. 15× 5.12×2.36 JDA A�M-081306 JDA-P�M-081306 JDA-C�M-081306 0813 S 0813 P (49) (98) 80×130× 75 3. 15× 5.12×2.95 JDA-A�M-081307 JDA-P�M-081307 JDA-C�M-081307 0813 S 0813 P (49) (98) 80×130× 85 3. 15× 5.12×3.35 JDA-A�M-081308 JDA-P�M-081308 JDA-C�M-081308 0813 S 0813 P (49) (98) 80×130×100 3. 15× 5.12×3.94 JDA-A�M-081310 JDA-P�M-081310 JDA-C�M-081310 0813 S 0813 P (49) (98) 80×130×125 3. 15× 5.12×4.92 JDA-A�M-081312 JDA-P�M-081312 JDA-C�M-081312 0813 S 0813 P (49) (98)

130×130× 35 5. 12× 5.12×1.38 JDA-A�M-131303 JDA-P�M-131303 JDA-C�M-131303 1313 S 1313 P (98) (98) 130×130× 60 5. 12× 5.12×2.36 JDA A�M-131306 JDA-P�M-131306 JDA-C�M-131306 1313 S 1313 P (98) (98) 130×180× 35 5. 12× 7.09×1.38 JDA-A�M-131803 JDA-P�M-131803 JDA-C�M-131803 1318 S 1318 P 113 161 130×180× 60 5. 12× 7.09×2.36 JDA-A�M-131806 JDA-P�M-131806 JDA-C�M-131806 1318 S 1318 P 113 161 150×180× 60 5. 91× 7.09×2.36 JDA-C�M-151806 1518 S (123) (161) 180×180× 60 7. 09× 7.09×2.36 JDA-A�M-181806 JDA-P�M-181806 JDA-C�M-181806 1818 S 1818 P (148) 180×180× 75 7. 09× 7.09×2.95 JDA-A�M-181807 JDA-P�M-181807 JDA-C�M-181807 1818 S 1818 P (148) (148)180× 180× 100 7. 09× 7.09×3.94 JDA-A�M-181810 JDA-P�M-181810 JDA-C�M-181810 1818 S 1818 P (148) (148)

(148)180×180×125 7. 09× 7.09×4.92 JDA-A�M-181812 JDA-P�M-181812 JDA-C�M-181812 1818 S 1818 P (148)180×255× 75 7. 09×10.04×2.95 JDA-A�M-182507 JDA-P�M-182507 JDA-C�M-182507 1825 S (148) (223) 180×255×100 7. 09×10.04×3.94 JDA-A�M-182510 JDA-P�M-182510 JDA-C�M-182510 1825 S (148) (223) 180×255×125 7. 09×10.04×4.92 JDA-A�M-182512 JDA-P�M-182512 JDA-C�M-182512 1825 S (148) (223)

JDA-P�M-151806JDA-A�M-151806(148)


Model and size

Aluminium Die Casting box

Dimension ( allowable error± 1mm)

DivisionW1 W2 W3 H1 H2 H3 D1 D2Size

64× 98×3480× 75×5780×125×5780×175×5780×250×57100×100×80100×160×80120×122×80120×220×80120×220×90150×132×90160×160×90160×260×90180×180×100230×200×110313×404×111313×404×181

6880808080100100120120120150160160180230313313

57.8727272729292111111111121151151171230303303

3652525252666682828292110110130140262262

9875125175250100160122122220132160260180200404404

91.86711716724292152113113211144151251171193394394

866311316323886146106106204138140240160150382382

25424242426161616161707171719191161

915151515202020203020202030202020

Width×Length×Height(mm)

Width×Length×Height(inch) Aluminium Box

steelmounting

plasticmounting

plate 64× 98× 34 80× 75× 57 80×125× 57 80×175× 57 80×250× 57100×100× 80100×160× 80120×122× 80120×220× 80120×220× 90150×132× 90160×160× 90160×260× 90180×180×100230×200×100313×404×111313×404×181

2.52× 3.86×1.34 3.15× 2.95×2.24 3.15× 5.00×2.24 3.15× 6.89×2.24 3.15× 9.84×2.24 3.94× 3.94×3.15 3.94× 7.87×3.15 4.72× 4.80×3.15 4.72× 8.66×3.15 4.72× 8.66×3.54 5.90× 5.19×3.54 6.30× 6.30×3.54 6.30×10.24×3.54 7.09× 7.09×3.94 9.06× 7.87×4.3312.32× 15.9×4.3713.32× 15.9×7.12

JDA-AL-061003JDA-AL-080806JDA-AL-081306JDA-AL-081806JDA-AL-082506JDA-AL-101008JDA-AL-101608JDA-AL-121208JDA-AL-122208JDA-AL-122209JDA-AL-151309JDA-AL-161609JDA-AL-162609JDA-AL-181810JDA-AL-232011JDA-AL-314011JDA-AL-314018

6010A0808A0813A0818A0825A1010A1016A1212A1222A1222A1513A1616A1626A1818A2320A3140A3140A

1626AP

2320AP


Assembly of dual door kits


Model and size

Dual door enclosure

1.Dual door is easy to open or close as it will be assembled with handle and hinge type. 2.it is very strong as it is fixed with 4 supports and it has good external appearance

swing frame applicable modelSize

Model ModelDual door

(frame,support,hinge,handle.included)Width×Length×Height

(mm)

SizeWidth×Length×Height

(mm)

Dual doormounting plate

(Aluminium)

Dual door(frame,support,hinge,

handle.included)

Dual doormounting plate

(Aluminium)

Product model swing frame applicable model Product model

200×300×130

200×300×150

200×300×180

250×350×150

250×350×180

280×280×130

280×380×130

300×300×150

300×300×180

300×400×150

JDA-F203013

JDA-F203015

JDA-F203018

JDA-F253515

JDA-F253518

JDA-F282813

JDA-F283813

JDA-F303015

JDA-F303018

JDA-F304015

JDA- P-203013

JDA- P-203015

JDA- P-203018

JDA- P-253515

JDA- P-253518

JDA- P-282813

JDA- P-283813

JDA- P-303015

JDA- P-303018

JDA- P-304015

JDA-FA2030

JDA-FA2030

JDA-FA2030

JDA-FA2535

JDA-FA2535

JDA-FA2828

JDA-FA2828

JDA-FA3030

JDA-FA3030

JDA-FA3040

300×400×180350×450×160350×450×200400×500×160400×500×200400×500×200400×600×180400×600×230400×600×230530×630×185530×630×255

JDA-F-304018JDA-F-354516JDA-F-354520JDA-F-405016JDA-F-405020JDA-F-405020JDA-F-406018JDA-F-406023JDA-F-406023JDA-F-506018JDA-F-506025

JDA-FA3040JDA-FA3545JDA-FA3545JDA-FA4050JDA-FA4050JDA-FA4050JDA-FA4060JDA-FA4060JDA-FA4060JDA-FA5060JDA-FA5060

JDA- P-304018JDA- P-354516JDA- P-354520JDA- P-405016JDA- H-405020JDA- P-405020JDA- H-406018JDA- P-406023JDA- H-406023JDA- P-506018JDA- P-506025


1. It is designed to prevent the penetration of rain or dust perfectly double as roof is protruded from top and bottom of the base.

2. It is easy to separate cover and base so that user can attach of detach them for processing and printing.

3. It is possible to reduce Product price and assembly cost from integrated cover and transparent window.

4. Insert hinge into the product and hinge connecting pin and important parts of draw latch aremade of stainless steel so

that it is very strong and corrosion resistant.

All-in-one Dual door Enclosure

Dimension ( allowable error± 1mm) Product Characteristics

Model and sizeModeland size(cover i ncluded) productmodel

ABS PC/ABS PC Model No.

mounting plate Dual Model

Size(mm) Model No Size(mm)Width×Length×Height (mm)

Width×length×Height (inch)

250×350×160

250×350×190

350×450×130

350×450×170

350×450×210

9.84×13. 77×6.29

9.84×13. 77×7.48

13.77×17.11×5.11

13.77×17.71×6.69

13.77×17.71×8.26

JDA-AGD-253516

JDA-AGD-253519

JDA-AGD-354513

JDA-AGD-354517

JDA-AGD-354521

JDA-PGD-253516

JDA-PGD-253519

JDA-PGD-354513

JDA-PGD-354517

JDA-PGD-354521

JDA-CGD-253516

JDA-CGD-253519

JDA-CGD-354513

JDA-CGD-354517

JDA-CGD-354521

2535 P

2535 P

3545 P

3545 P

3545 P

2535S

2535S

3545S

3545S

3545S

D 2535

D 2535

D 3545

D 3545

D 3545

216×316

216×316

306×407

306×407

306×407

220×220

220×220

314×313

314×313

314×313


1.Built-in guide slot for inserting PCB

2.0ptional extension to length of the profile.

3.Aluminium SBGL is suitable for highly corrosive enviroment (Custom)

4.Optional EMC-version for Electromagnetic shielding (Custom)

JDA aluminium housing for inserting card

Dimension ( allowable error± 1mm) Product Characteristics

Model and sizeproduct model Model and size(cover included)

Aluminium Width×Length×Height (mm)

Width×length×Height (inch)

JDA-ALC-111609

JDA-ALC-172011

111.5 × 166 × 91.5

173 × 206 × 113

4.39 × 6.53 × 3.6

6.81 × 8.11 × 4.44


3~5.58~4.56~10

7~12.58.5~1412.5~18

12~12.815.2~15.518.6~18.920.4~20.722.5~22.828.3~28.7

12.515.218.620.422.528.3

JDA-G-PG 7JDA-G-PG 9JDA-G-PG 11JDA-G-PG 13.5JDA-G-PG 16JDA-G-PG 21

Material:Nylon plastic Hermetic seal:Nitrile rubberIP rating:IP66Ambient tempersture:-20°C~65°CSupply color:Grey

Cable Glands - PG Series

JDA-PG-L LONG GABLE GLAND

JDA-BP-PG BEND PROOF CABLE GLAND

Model and size

Model and size

Model and size



JDA-PG CABLE GLAND

Node No.Gray Dark Gray Cabe ΦmmBack

Size B(mm)A(mm)

Node No.

Artice No. Cabe Range(mm)

Panel MountinhHole

Gray Cabe ΦmmSize

B(mm)A(mm)

A(mm)

JDA-PG 7 -GJDA-PG 9 -GJDA-PG 11 -GJDA-PG 13. 5-GJDA-PG 16 -GJDA-PG 19 -GJDA-PG 21 -GJDA-PG 25 -GJDA-PG 29 -GJDA-PG 36 -GJDA-PG 42 -GJDA-PG 48 -GJDA-PG 63 -G

JDA-PG 7L -GJDA-PG 9L -GJDA-PG 11L -GJDA-PG 13.5L -GJDA-PG 16L -G

3.5~64~85~106~1210~14

1515151515

1216182022

JDA-PG 7 -DJDA-PG 9 -DJDA-PG 11 -DJDA-PG 13.5-DJDA-PG 16 -DJDA-PG 19 -DJDA-PG 21 -DJDA-PG 25 -DJDA-PG 29 -DJDA-PG 36 -DJDA-PG 42 -DJDA-PG 48 -DJDA-PG 63 -D

JDA-PG 7 -BJDA-PG 9 -BJDA-PG 11 -BJDA-PG 13.5-BJDA-PG 16 -BJDA-PG 19 -BJDA-PG 21 -BJDA-PG 25 -BJDA-PG 29 -BJDA-PG 36 -BJDA-PG 42 -BJDA-PG 48 -BJDA-PG 63 -B

3~64~85~106~1210~1412~1513~1815~1918~2522~3230~3834~4442~50

88891010101112

13.514.51427

12.515.218.620.422.523.528.329.53747545970

Material:Nylon plasticHermetic seal:Nitrile rubberAmbient temperature:quiescent state-40°C to 100°C,short time to 120°C dynamic-20°C to 80°C, short time to 100°CSupply color:Grey


Model and size

Model and size

Model and size



JDA-MPG METAL CABLE GLAND

JDA-PKM-P PKM METAL CABLE GLAND

JDA-HSK-EX-P EX PLASTIC CABLE GLAND

B(mm) Wrench size(mm)A(mm)Artice No. Thread Dimension

Clamping range(mm)

Wrench size(mm)A(mm)Artice No. Thread Dimension

Clamping range(mm)

Wrench size(mm)A(mm) A(mm)Artice No. Clamping range

(mm)

JDA-MPG 7JDA-MPG 9JDA-MPG 11JDA-MPG 13JDA-MPG 16JDA-MPG 21JDA-MPG 29JDA-MPG 36JDA-MPG 42JDA-MPG 48

JDA-PKM-P 7JDA-PKM-P 9JDA-PKM-P11JDA-PKM-P13

JDA-HSK-EX-P 7JDA-HSK-EX-P 9JDA-HSK-EX-P 11JDA-HSK-EX-P 13JDA-HSK-EX-P 16JDA-HSK-EX-P 21JDA-HSK-EX-P 29JDA-HSK-EX-P 36JDA-HSK-EX-P 42JDA-HSK-EX-P 48

3~6.54~85~106~128~1413~1818~2522~3230~3837~44

8889101111131415

12.515.218.620.422.528.3374754

59.3

15192224273342526065

PG 7PG 9PG11PG13.5

6~88~1010~212~14

5667

15172224

PG 7PG 9PG 11PG 13.5PG 16PG 21PG 29PG 36PG 42PG 48

3~6.54~85~106~128~1413~1818~2522~3230~3837~44

56677889910

12.515.218.620.422.528.3374754

59.3

14172022243040506065

Material:Body:nickel-plated brass seal:polymide 66,Sealing:NBRProtection degree:Within the clamping range,its protection degree can reach IP68Properties:succeed in the experiment of IEC-60077-1999 resistance to vibration and impact.Temperature Range:Stat:Min-40°CMax 100°C,short-term120°C Dyn,:Min-20°C,Max80°C,short-term 100°C

Material:Body:nickel-plated brass barss Sealing:NBRProtection degree :Within the clamping range , its protection degree can reach IP65

Material:Polyamide 66, sealing:NBRColor:Grey white(RAL 7035),Black(RAL 9005)Protection degree:Using suitable 0-sealings within the clamping range, its protection degree can reach IP68Temperature Range:Stat. :Min-40°C,Mlax 100°C,Short-term 120°CDyn. :Min-20°C,Max 80°C,Short-term100°CProperties:V2(94),free of halogen, phosphor and cadmium, passed RoHS UV -resistance ,ageing-resistance certificatesEX degree:Exe II T5 Certificate NO. :CNEx07.0311U


Model and size

Model and size

Model and size




JDA-HSM-EX-P EX METAL CABLE GLAND

JDA-RG-PG RUBBER GROMMET PG

JDA-SP-PG SCREW PLUG

B(mm) Wrench size(mm)A(mm)Artice No. Thread Dimension

A(mm) B(mm) Da(mm)

A(mm) B(mm) Da(mm)

H(mm) H1(mm)Artice No.

Artice No.

Thread AD(mm)

Clamping range(mm)

Mater:Body:nickel-plated brass Seal:Polyamide 66,Sealing:NBRProtection degree:With the clamping range its protection degree can reach IP68Properties:succeed in the experiment of IEC-60077-1999 resistance to vibrationand impact. Temperature Range:Stat, :Min-40°C,Max100°C,Short-term120°C,Dyn, :Min-20°C, Max80°C,Short-term 100°C Ex degree:Exe II 15 Cerfificale NO:CNEx07.03126

Mode of protection :IP67 acc,to EN 60529Temperature range:-40°C…+100°CTest standard:EMKO TUI(03-SEC)F1001/84Semko report:410375Halogen-free

Material:nylon plasticProtection degree:IP54Ambient temperature:-40°C to 100°CSupply color:Grey,Black

JDA-HSM-E×-P 7JDA-HSM-E×-P 9JDA-HSM-E×-P11JDA-HSM-E×-P13JDA-HSM-E×-P16JDA-HSM-E×-P21JDA-HSM-E×-P29JDA-HSM-E×-P36JDA-HSM-E×-P42JDA-HSM-E×-P48

JDA-RG-PG 7JDA-RG-PG 9JDA-RG-PG 11JDA-RG-PG 16JDA-RG-PG 21JDA-RG-PG 29JDA-RG-PG 36

JDA-SP-PG 7JDA-SP-PG 9JDA-SP-PG 11JDA-SP-PG 13.5JDA-SP-PG 16JDA-SP-PG 21JDA-SP-PG 29JDA-SP-PG 36JDA-SP-PG 42JDA-SP-PG 48

8.58.599

10.58.511.513.513.514.5

12.513131315

13.51618

18.519.5

15192225273344556268

12.515.218.622.528.33747

3~55~7

7~1010~1414~2020~2626~35

13161923293848

0.5~21~41~41~41~41~41~4

20212428354658

12.617.819.821.624.628.534.9

5.410.312.714.717.620

23.9


3~6.54~8

5~106~128~14

13~1818~2522~3230~3837~44

566778899

10

12.515.218.620.422.528.3374754

59.3

14172022243040506065

Φmm(Cabe)


Model and size

Model and size

Model and size




JDA-MSP-PG METAL SCREW PLUG

JDA-HP-PG HOLE PLUG

JDA-DPM-P HEXAGON PLUG

B(mm) Wrench size(mm)A(mm)Artice No.

A(mm) B(mm) H(mm)Wrenchsize(mm)

TheradDimension

Artice No.

Artice No.

Aperture of the steel board

od of theplug Thickness Total length

A D L1 L

Material:Nickel-plated brassProtection degree:IP68

Material:PA66,94-V2 Color:Black(RAL 9005) Temperature Range:Min-40°C,Max 100°C Application:To cover the spare holes by pushing the plug with your hand, you can finish the assembly easily without additional tools,suitable for the steel borad below 3.2mm

Material:Nickel-plated brassProtection degree:IP68

JDA-MSP-PG 7JDA-MSP-PG 9JDA-MSP-PG 11JDA-MSP-PG 13.5JDA-MSP-PG 16JDA-MSP-PG 21JDA-MSP-PG 29JDA-MSP-PG 36JDA-MSP-PG 42JDA-MSP-PG 48

566

6.56.5789

1010

899

9.59.51112151616

14172022243039505764

JDA-DPM-P 7JDA-DPM-P 9JDA-DPM-P 11JDA-DPM-P 13JDA-DPM-P 16JDA-DPM-P 21JDA-DPM-P 29JDA-DPM-P 36JDA-DPM-P 42JDA-DPM-P 48


56677789

1010

12.515.218.620.422.528.3374754

59.3

14172022243040506065

89910101112151616

JDA-HP-PG 8JDA-HP-PG10JDA-HP-PG13JDA-HP-PG16JDA-HP-PG19JDA-HP-PG22JDA-HP-PG26JDA-HP-PG30

7.89.5

12.715.919

22.225.530

11.913

16.919.822.924.928.334.2

1.61.61.61.61.61.61.61.6

810.510.510.510.511.511.511.5

JD Auspice Co.,Ltd.　TEL: 886-2-8991-2796　FAX: 886-2-8991-9298　[email protected]　www.jdauspice.comJD Auspice Co.,Ltd.　TEL: 886-2-8991-2796　FAX: 886-2-8991-9298　[email protected]　www.jdauspice.com

Artcle no. Processing Size Ventilation fan SizeAJDA-V 60JDA-V 80

Material: SUS304JDA-L65

Material: SUS304 Material: Aluminium

Material: SUS304JDA-H65

JDA-H75 JDA-H65 JDA-H55 JDA-D30L JDA-D25L JDA-D30S JDA-D25S

Material: Steel (Zinc pla�ng)

Use only p-type

Material: SUS304JDA-B50

JDA-L75JDA-L55

JDA-B60JDA-B40

JDA-L75 JDA-L65 JDA-L55JDA-B60

JDA-PSK50 JDA-PSK35 JDA-PSK20

JDA-H75JDA-H55

JDA-B50 JDA-B40

50 ±0.3mm71.5±0.3mm

63~65Ø88~90Ø

60Ø80Ø

It is easy to exhaust heat of inside box outsideIt is easy to install cooling pan inside the boxIt is designed to prevent the penetra�on of rain


Material: NylonAll hinge type products

Material: ABS Material: SUS304

JDA-ES

Back SideFront Side

Material: SUS304 etcAll hinge type products

Material: SUS304All hinge type products

Material: Aluminium Medium and large plas�c Boxes

Material: ABS Frame,support,hinge,handle

Material: ABS All plas�c box products

Material: Steel (Zink pla�ng) All plas�c box products

JDA-PK JDA-SK JDA-K40

日煬科技有限公司JD Auspice Co., Ltd

JDA


採用高強度ABS、PC耐火材料製成，適用於端子箱、配電盤、儀錶箱、電力設備控制箱及各種自動化領域

抗擠壓 / 絕緣 / 抗腐蝕 ip67 enclosure catalogue · injection molding it is easy to make...

Documents