ٓشٔرق دمحم رون قٕفر دمحم .د fathers’ nam various subjects of mechanical...
TRANSCRIPT
1
Curriculum Vitae
Objective: Seeking career development opportunity through continuous quality enhancement
[1] Personal Information:
Name : Dr.Mohamed Rafik Noor Mohamed Qureshi
محمد رفيق نور محمد قريشي د.
Fathers’ name : Qureshi Noor Mohamed Karim Bux
Date of birth : 26-06-1960
Address : College of Engineering,
King Khalid University,
Gregar Campus, Abha, Kingdom of Saudi Arabia
E-mail : [email protected]
[email protected], [email protected]
Contact number : +966534059861
Present Employer : College of Engineering, King Khalid University, Kingdom of Saudi Arabia
(KSA)
[2] Research Interest: Flexible Manufacturing System, Total Quality Management,
Manufacturing Excellence, Welding, Non-Traditional Machining Methods, Logistics and
Supply Chain Management
[3] Educational Qualifications:
Sr.
No.
Name of the
Examination
Name of the
Board/University
Total Marks
Obtained and
Year of Passing
Percentage Class
1 Ph.D. Indian Institute of
Technology Roorkee,
Roorkee
25-07- 2005
to
24-07-2008 -
Ph.D.
Awarded on
8th
Nov.2008
2 M.E. The M.S.University of
Baroda, Vadodara
1167/1700
Aug,’91
66.68% First class
3 B.E. The M.S.University of
Baroda, Vadodara
1000/1450
Dec,’86
68.96% First class
with
Distinction
4 Diploma Technical Examination
Board, Ahmedabad,
Gujarat
948/1300
April,’79
72.92% First class
with
Distinction
[4] Membership in Professional Societies:
Sr.
No.
Name of the Institution Grade of
Membership
Membership No. Date of
Registratio
n
1 Indian society for Technical
Education (ISTE)
Life Member LM3406 27-03-1989
2 Institution of Engineers(India) Fellow Member F/116004-0 02-06-2011
3 Chartered Engineer Life Member M/106548/8 22-06-1993
4 International Disordered Systems
Association Society (INDIAS)
Life Member 97/2000/U-IV/TDS/
INDIA
03-12-2000
2
[5] Professional Experience:
Asea Brown Boveri Ltd. (Earlier Hindustan Brown Boveri Ltd.), Vadodara
Sr.
No.
Designation Duration Initial Basic and Scale of Pay Total
Experience
1 Assistant
Engineer
1-8-79 to
9-3-87
Rs.1050 P.M.
(620-40-700-50-900-EB-50-1300)
7 years &
7 months
Development of Machined Parts and Molded Components like Rubber Gaskets, Seals, ‘O’
rings etc. and Complete Production Planning, Material Planning, Inventory Control,
Procurement, Production Coordination and Completion of Production Dispatch Targets for
Railway Products (i.e. Tap Changer and DBTF)
[6] Teaching Experience:
Polytechnic, M S. University of Baroda: (13 years & 6 Months)
Sr.
No.
Designation Duration Basic and Scale of
Pay
Total
Experience
1 Lecturer 10-3-1987 to
09-3-1993
Rs.8000 P.M.
(8000-275-13500)
6 years
Lecture (Senior Scale) 10-3-1993 to
09-3-1998
Rs.10,000 P.M.
(10000-325-15200)
5 years
Lecture (Selection Grade) 10-3-1998 to
06-9-2000
Rs.12,000 P.M.
(12000-420-18300)
2 years &
6 months
Taught various subjects of Mechanical Engineering viz. Production Technology- I, II and
III, Engineering Drawing, Computer Application, Thermal Water Power Engineering,
Industrial Engineering, Technical Dynamics etc.
No. of Diploma Projects guided: 15
Faculty of Tech.& Engg., M S. University of Baroda : (12 Years & 5 Months)
Designation Duration Basic and Scale of
Pay
Total
Experience
2.0 Assistant Professor 07-9-2000 to
06-9-2005
Rs.12,000 P.M.
(12000-420-18300)
5 years
2.1 Associate Professor (CAS) 07-09-2005 to
31-08-2009
Rs.58,483 P.M.
(37400-67000)
4 years
2.2 Professor (CAS) 01-09-2009 to continue [5 years & 5 months]
(On Leave since 2-10-2013 to 4-06-2015)
أستاذ مشارك 2.3Associate Professor
جامعة الملك خالد، المملكة العربية السعوديةCollege of Engineering, King Khalid University
2-10-2013 to Present
Subjects taught at MSU: Value Engineering, Industrial Engineering, Mechanical Engineering,
Production Technology, Technical Dynamics, Engineering Design, Theory of Machines,
Thermodynamics, Industrial Engineering & Management, Engineering Estimating & Costing,
Industrial Management & Engineering Economics etc.
No. of M.E. Dissertations guided: 11
Subjects taught at KKU: Manufacturing Engineering (هندسة تصنيع), Design Analysis of
Industrial Systems (تحليل وتصميم النظم الصناعية), Design of Experiments ( التجاربتصميم ), Engineering
Economy (اقتصاد هندسي), Operation Research (بحوث العمليات), Industrial Management & Quality
Control ( ةجودادارة صناعية وضبط ), Facilities Planning ( الصناعيةتخطيط المنشأت ), Measurement and
Instruments (القياسات وأجهزة القياس). Reliability Engineering and Maintenance
.etc ( هندسة العوامل البشرية) Human Factor Engineering ,(الموثوقية الهندسية والصيانة)
االقتصاد الهندسي منسق للتعلم اإللكتروني من
Well conversant with Blackboard teaching
Member of Curriculum Committee for National Commission for Academic Accreditation &
Assessment (NCAAA) and ABET Accreditation
3
Successfully completed eight-week long course on "Arabic Language"
No. of B.Tech. Project guided in KSA:1+2 (Research in progress)
Ph.D. Guidance:
Sr.No. Thesis Title /Research Scholar IIT/NIT/University
1 Identifying, Implementing And Evaluating TQM Practices In Select
Indian Service Companies (September -2011): Mr.Faisal Talib
(Ph.D. Awarded)
Indian Institute of
Technology Roorkee
2 Developing a model for analyzing and measuring customer
experience: A study of Indian banks (June-2012): Mrs.Ruchi Garg
Talib (Ph.D. Awarded)
Indian Institute of
Technology Roorkee
3 A study of measurement of Green Supply Chain Performance for
Textile Industry of Surat, India (December-2015): Mr. Patel Hiren
Kamleshbhai Talib (Ph.D. Awarded)
S V National Institute
of Technology
4 Implementation and Computation of Performance Excellence in
Connecting Rod Manufacturing Industries (January-
2017):Mr.Sonigra Sunilkumar Sureshchandra (Ph.D. Awarded)
Gujarat Technological
University
5 Study and development of models for supply chain performance
measurement in select industries.(June -2017): Mr.Georgy P Kurien
(Defense pending)
The M S University of
Baroda
6 Adoption of Flexible Manufacturing System (June -2017):Mr. Siraj
Sundarani (Defense pending)
Gujarat Technological
University
M.Tech. Project of I.E.(India),Kolkata Project Guidance:
1 Project guided for postgraduate student of Institution of Engineers (India), Kolkata.
MBA(IGNOU, New Delhi) Project Guidance:
4 MBA Projects
Research Project/Consultancy:
Awarded 3.88 lakhs for research project under Promotion of University Research &
Scientific Excellence (PURSE) for Study of Some Select Issues in FMS.
Can handle MDP like Project Management, Manpower appropriation study, Time and
Motion study, Value Mapping Study etc.
Honors & Awards:
Member, Emerald Literati Network, 2011
Best Ph.D. Thesis awarded at 3rd
PIMG International Conference.2011
2012 Emerald/IAM South Asia Management Research Fund Award highly commended
runners up "Problem and prospects of compost marketing in Uttarakhand, India"
Best Employee Award for 2016-2017
Software Proficiency:
MATLAB 7.0.1, EXPERT CHOICE 11, SUPER DECISION 1.6.0, WEKA 3.4, AutoCAD
2005, Microsoft Office 2003, SmartDraw 6.0, MINITAB 13.0, SPSS 16.0, SIGMAPLOT
9.0, LINGO 10.0, LINDO 6.1, LISREL 8.8, Amos 5.0
Other Duties Discharged:
Departmental & University work related to Admissions, Tabulation work, Press duty and
Time-Table preparation from time to time.
Worked as a Committee Member and helped in purchasing equipments for the laboratory
development of ‘Technical Dynamics’ at Polytechnic, MSU by visiting various Engineering
colleges of Gujarat during June, 2005.
4
[7] Publications: 133 (Refer Annexure-I):
Paper in refereed International Journal 57
Paper in refereed National Journal 05
Papers accepted in International Conference 33
Papers accepted in National Seminar/Conference 38
Chapter in Edited Book:
Measurement of Flexibility and Its Bench marking Using Data Envelopment Analysis in
Supply Chains, in Organisational Flexibility and Competitiveness. (Springer),pp.259-272
Delhi. ISBN 978-81-322-1667-4
Book Edited:
Ergonomic Research Techniques, ISBN: 978-81-89547-97-4, Wisdom Publications,
Delhi.
Special Issue Edited:
Edited special issue for “International Journal of Logistics Economics and Globalization,
on “Challenges of Macro and Micro economics” Guest Editors: Dr. K. Ganesh and
Dr.Matti Muhos, and Dr. M. N. Qureshi, Int. J. Logistics Economics and Globalisation,
Vol. 4, Nos. 1/2, 2012.
Edited special issue for “International Journal of Enterprise Network Management, on
“Logistics Services for Effective Supply Chains” Guest Editors: Dr. M. N. Qureshi,
Dr. K. Ganesh and Prof. Tzong-Ru, Vol. 5, No. 2, 2012.
Article published in News Paper:
“Total Quality in Engineering Education”, published in Indian Express under OPTIONS, issue
of 2-2-2000 from Ahmedabad / Vadodara Edition.
Member of Editorial Board:
International Journal of Logistics and Supply Chain Management (IJLSCM), Serial
Publications
International Journal of Decision Making in Supply Chain and Logistics (IJDMSCL), Serial
Publications
International Journal of Operations, Systems and Human Resource Management
(IJOSHRM), Serial Publications
International Journal of Green Computing (IJGC), , IGI Global
International Journal of Applied Industrial Engineering, IGI Global
Scientific Journals International (SJI)
International Journal of Business, Management(IJBM),MultiCraft
International Journal of Emerging Technologies and Applications in Engineering,
Technology and Sciences (IJ-ETA-ETS)
Ganpat University Journal of Engineering & Technology
Reviewed research papers for the following Journals:
Measuring Business Excellence (Emerald)
Benchmarking: an International Journal (Emerald)
The TQM Journal (Emerald)
Int. Journal of Advanced Operations Management (Inderscience)
Int. Journal of Business Performance & Supply Chain Modelling (Inderscience)
Journal of Information, Information Technology, and Organizations (The Informing Science
Institute)
Int. Journal of Integrated Supply Management (Inderscience)
Int. Journal of Library and Information Science (Academic Journal)
Operations and Supply Chain Management: An International Journal
OPSEARCH (Springer)
5
Int. Journal of Information Technology & Decision Making (IJITDM)-(World Scientific)
Technical Board Member/Reviewer for following National & International Conferences:
Technical Board Members of International Conference on Innovative Science &
Engineering Technology, Rajkot during 8-9, April, 2011 (ISBN: 978-81-906377-5-6)
National Conference on Advances in Mechanical Engineering (NCAME-2010), AMU,
Aligarh, 27-28, Nov.,2010 (ISBN: 93-80697-33-3)
National Conference on Advances in Materials and Product Design (AMPD-2010), SVNIT,
Surat, during 22-23, Nov.,2010 (ISBN: 978-81-8465-293-2.)
National Conference on Futuristic Trends in Mechanical Engineering (NCEVT-2009-2012),
PIET, Vadodara.
Session Chairman / Repertoire in International and National Conference:
Conducted session during Third National Conference on Recent Advances in
Manufacturing organized by SVNIT, Surat during 27-29, June, 2012.
Conducted sessions during National Conference on Emerging Challenges for Sustainable
Business-2012 organized by DBS, IIT Roorkee, Roorkee during 1-2, June, 2012.
Conducted sessions on ‘Logistics and Supply Chain Management’ and ‘Product and Process
Innovation’ in International Conference on Industrial Engineering (ICIE 2011) held during
17-19, Nov., 2011 at SV National Institute of Technology, Surat.
Conducted session in 6th
Indian Congress on Quality, Environment, Energy and Safety
Management Systems and 1st International Quality Congress National Seminar during 20-
11, Dec., 2010 at Baroda Productivity Council, Vadodara.
Conducted session in NCEVT’10 Conference held during 4th
-5th
Dec., 2010 at PIET,
Limda, Vadodara.
Conducted session in National Seminar on Ergonomic Research Techniques held
during 11-12, Feb., 2010 at Faculty of Home Science, M.S. University, Vadodara.
Conducted session in NCEVT’09 Conference held during 11-12,Sept.,2009 at PIET,
Limda, Vadodara.
As a Repertoire at All India Seminar on Waste Minimization and Cleaner Productivity,
by Institution of Engineers (India), GSC, Ahmedabad during 28-29, Aug., 2010.
As a Repertoire at 30th
Annual Convention & National Seminar by Nirma Institute of
Technology, Ahmedabad during 14 -16, Dec.,2000.
[8] Participation in International Project of Vocational Qualification:
Participated in the first pilot project of National Vocational Qualifications (NVQs) and
achieved a NVQ Qualification as an Assessor for the following levels from EMTA Awards
Ltd., U.K. through Confederation of Indian Industry (CII), Ahmedabad and British
Technical International (BTI, U.K.)
1. U1019357- To Assess Candidate Performance (D32- Level)
2. U1019358- To Assess Candidate Using Differing Sources of evidence (D33- Level)
[9] Activities Related to Self Development:
Details of Seminars /Work shops/Conferences/Conventions Attended: 40
(Refer Annexure-II)
Training Programmes Attended: 22 (Refer Annexure-III)
[10] Contribution Towards Students’ Development Activities:
As a Founder Faculty Adviser started the ISTE Students Chapter in Feb, 1998 at
Polytechnic and conducted various activities like Seminars, Industrial visits, Quiz tests,
Group discussion, and Cultural programs leading to overall development of students and
won the following awards consecutively.
6
Sr.No. Name of the
Award
Duration Venue
1 Best Chapter Award 1998-1999 XXIX Annual Convention at Erode
2 Best Chapter Award 1999-2000 XXX Annual Convention at Ahmedabad
Mentoring students who took part in II Annual Convention at NIT, Jalandhar and won
several prizes during 3-4 Oct, 2002.
Mentoring students, who took part in “Elocution on Educational Reforms in India” at MSU
on 20th
Jan, 2001.
Contributed as a ‘Judge’ in Technical Event of FOOTPRINTS related to Mech. Engg.,
during 2009 and 2010.
Participated in GTU Research Week-2015 on 20th
and 21st March,2015.
[11] Contribution towards Teachers’ Development Activities:
A) Details of Seminar /Work Shop/Conference/Convention conducted:
As a Coordinator conducted a One-Day Seminar on “Information Technology” in
coordination with Assets International, Alkapuri, Vadodara on 6th
Dec 1998.
As a Coordinator conducted a One-Day Seminar on “Advanced CAD/CAM with Master
CAM” in coordination with CAM TOOLS, Mumbai on 20th
Feb, 2000.
As a Coordinator conducted a One-Day Seminar on “E-Commerce & Internet” in
coordination with ZAP Computers, Vadodara on 13th
Aug, 2000.
Conducted Workshop on ‘Decision Making-Using AHP Modeling’ on 13th
March, 2012 at
L.D. College of Engineering, Ahmedabad during Research Week of Gujarat Technological
University.
B) Details of AICTE/ISTE/UGC Short Term Training Programmes (STTP)/
Work-Shop Conducted: 06 (Refer Annexure-III)
[12] Assignments at Various Institutions:
No. of Expert Lecture/ Talks Delivered: 30 (Refer Annexure-IV)
Member, BOS, M S University of Baroda, Vadodara
Worked as a Member, Expert Panel to select AICTE-ISTE, STTP for 2001-2002.
As a subject expert participated in selection committee for various teaching posts for the
following Engineering Colleges (year and frequency of selection committee):
Parul Institute of Engineering and Technology, Limada, Vadodara (2003, 2004,
2009,2011(5), 2012(4))
Vadodara Institute of Engineering, Kotambi, Waghodiya (2009,2010,2011,2012)
Sigma Institute of Engineering, Bakrol, Waghodiya (2009,2012(3))
Ganpat University, Kherva, Mehsana (2011)
Shroff S.R.Rotary Institute of Chemical Technology (2011(2))
Pandit Deendayal Petroleum University (PDPU) (2013)
Member of “Academic Council Committee” of Vadodara Institute of Engineering,
Kotambi, Waghodiya.
Examination Assignment: SVNIT (Surat), Aligarh Muslim University (Aligarh), Mohanlal
Sukhadia University (Udaipur), Maharana Pratap University of Agriculture and Technology
(Udaipur), Ganpat University (Kherva), Anna University, Gujarat Technological University
(Ahmedabad) etc.
As an Officer-in-Charge conducted Post Graduate Diploma exam of M. E. students for
Institution of Engineers (I) during 10-13 Nov., 2011.
[13] Contribution towards Professional Societies:
“State Committee Member” of Institution of Engineers (India), State Local Center,
Ahmedabad for the period of 2001-2005, 2008-2010 and 2010-2012, Committee Member
of Vadodara Local Center for 2012-2014.
As a Committee Member organized several programmes for the benefit of corporate
members.
“Hon. Secretary cum Treasurer”, ISTE Technology Chapter at Faculty of Tech & Engg,
MSU from 01-01-2001 to 30-6-2005.
7
[14] Technology Transfer/Industry Institute Interaction Related Activities:
As a Centre Director started Technology Transfer Centre in coordination with CII TDB
T Net, New Delhi at Faculty of Tech. & Engg., MSU, Vadodara.
Attended Work Shop on “CII TDB T NET Center Directors’ Meet: Partnering
Industry” at CII Institute of Quality, Bangaloru during 28-29 May, 2001.
Attended Work Shop on “Technical Problem Solving Strategies for Industries” at
Faculty of Tech. & Engg., MSU on 30th
Aug, 2003.
[15] References:
Dr. Pradeep Kumar [email protected]
Vice chancellor, Delhi Technological University,
Office: [email protected], Tel: +91127871018,Fax: +911127871023
[Former Dean, Finance & Planning and
Professor, Mechanical and Industrial Engineering Department,
Indian Institute of Technology Roorkee, Roorkee
Contact Numbers: Phone: +91-1332- 285270 (O), Fax : +91-1332- 285822]
Dr. Dinesh Kumar [email protected]
Professor, Mechanical and Industrial Engineering Department,
Indian Institute of Technology Roorkee, Roorkee
Contact Numbers: Phone: +91-1332- 285670 (O), Fax : +91-1332-273560
Dr. M.K.Tiwari [email protected]
Professor, Industrial Engineering & Management Department,
Indian Institute of Technology Kharagpur, Kharagpur
Contact Numbers: +91-3222-283746(O), Fax: +91-3222-255303
8
Annexure - I
LIST OF RESEARCH PUBLICATIONS
PUBLISHED INTERNATIONAL JOURNAL PAPERS [57]
1. Chauhan,N.D.,Darji,P.H. and Qureshi, M.N.(2017), “Analysis of Readiness Level and
Comparison in Automobile Industry of Gujarat by Identification of Critical Success
Factors”,Vol.3 No.2,ISSN: 2454-132X 9 (Online)
2. Patel, H., Bulsara, H. P., and Qureshi M. N. (2017), “Phase Change Material with Thermal
Energy Storage System and Its Applications: A Systematic Review”, Indian Journal of Science
and Technology, Vol.8 No.1, ISSN: 0974-5645 (online).
3. Qureshi, M.N., Ram Karan Singh, Mohd. Abul Hasan (2017), Decision support model to select
crop pattern for sustainable agricultural practices using fuzzy MCDM, Environment,
Development and Sustainability,pp.1-19.
4. Sundarani, S.H. and Qureshi,M.N. (2017), “Study Of Adoption Barriers For Flexible
Manufacturing System In Industry”,Vol.6 No.4,pp.453-455,ISSN:2277.
5. Patel, H., Bulsara, H. P., and Qureshi M. N. (2016), “Green supply chain performance
measurement: an exploratory study”, International Journal of Logistics Systems and
Management, Vol.23 No.4, pp.476-498, ISSN: 1742-7967
6. M Azam, MN Qureshi, F Talib (2016), AHP Model for Identifying Best Health Care
Establishment, International Journal of Productivity Management and Assessment Technologies,
Vol.3 No.2, pp.34-66, ISSN: 2160-9837.
7. Patel, J.H., Qureshi, M.N. and Darji, P. H. (2016), Experimental analysis of thermal energy
storage by phase change material system for cooling and heating applications, Materials
Today:Proceedings.
8. Patel, J.H., Qureshi, M.N. and Darji, P. H. (2016), A Review: Utilization of Waste Energy to
Improve the Efficiency of the Systems, Indian Journal of Science and Technology, Vol. 9
No.38.ISSN: 0974-5645 (online).
9. Patel, J.H., Darji, P. H. and Qureshi, M.N. (2015), A Case study: Waste heat recovery by shell
and tube type of heat exchanger to improve in efficiency of the power generation system.”
International Journal on Mechanical Engineering and Robotics (IJMER), ISSN(Print): 2321-
5747
10. R.A. Prajapati, and Qureshi, M.N. (2015), “Metal Matrix Composite production methods and
research Opportunity – A review”, International Journal of Engineering Science and Futuristic
Technology (IJESFT), Vol.09 001-012
11. G.P. Kurien and Qureshi, M.N. (2015), “Analysis and measurement of supply chain flexibility”,
International Journal of Logistics Systems and Management (IJLSM), Vol. 21, No. 1,pp.70-91,
ISSN: 1742-7967
12. Ansari, Z, A. and Qureshi, M. N. (2015), “Sustainability in supply chain management: an
overview”, The ICFAI Journal of Supply Chain Management , Vol. XII, No. 2, pp. 24-46. ISSN:
0972-9267
13. Patel, H., Bulsara, H. P., and Qureshi M. N. (2014), “Role of Managers in Supply Chain
Management - An Exploratory Study”, International Journal of Applied Business and Economic
Research, Vol. 12 No. 4, pp.1167-1178.
14. Bulsara, H.P., Qureshi, M.N. and Patel, H.K.(2015), “Green Supply chain performance
measurement: an exploratory study, International Journal of Logistics Systems and
Management (IJLSM), Vol. 23 No. 4, pp.476-498,ISSN: 1742-7967
9
15. Bulsara, H.P., Qureshi, M.N. and Patel, H.K.(2014), “Supply Chain Performance Measurement:
An Exploratory Study”, International Journal of Logistics Systems and Management (IJLSM),
Vol.18 No.2. pp.231-249, ISSN: 1742-7967
16. Qureshi, M. N., Abdelhakim Abdelhadi and Mwafak Shakoor (2014), “Developing New
Services For 3pl Services Providers Using Fuzzy QFD: Case Study”, The ICFAI Journal of
Supply Chain Management, Vol. XI No.3 pp. 07-38, ISSN: 0972-9267.
17. Sonigra, S.S. and Qureshi, M. N. (2014), “Computation of Overall Equipment Effectiveness in
Connecting Rod Manufacturing Operations”, The IUP Journal of Mechanical Engineering, Vol.
VII, No.3, pp.49-60, ISSN: 0974-6536.
18. Sonigra, S.S. and Qureshi, M. N. (2013), “Review of Implementation of Overall Excellence
Model in Select Manufacturing Industries”, Asian Academic Research Journal of
Multidisciplinary, Vol.1 No.16,pp.348-363,ISSN:2319-2801.
19. Rojasara,P.M. and Qureshi,M.N. (2013), ‘Performance Improvement through 5S in Small Scale
Industry: A case study”, International Journal of Modern Engineering Research
(IJMER),Vol.3,No.3, pp-1654-1660, ISSN: 2249-6645
20. Talib, F., Rahman, Z. and Qureshi, M.N. (2013), “An empirical investigation of relationship
between total quality management practices and quality performance in Indian service
companies”, International Journal of Quality & Innovation (IJQI), ISSN: 0265-671X, Vol. 2
No.2,pp.105-119,ISSN: 1756-6975.
21. Sonigra S.S., Qureshi, M. N. (2012). Solving the problem of End Float with the Application of
Six Sigma Tools : A Case Study. The IUP Journal of Mechanical Engineering, Vol. V, No.2,
pp.7-20, ISSN: 0974-6536.
22. Garg, R, Rahman, Z., and Qureshi, M.N. (2012), “Measuring customer experience in banks:
Scale development and validation”, Journal of Modelling in Management (JMM), Emerald,
ISSN: 1746-5664, Vol. 9 No.1, pp.87 - 117.
23. G.P.Kurien and Qureshi, M. N. (2012), “Performance measurement systems for green supply
chains using modified balanced score card and analytical hierarchical process” Scientific
Research and Essays (SRE), ISSN: 1992-2248, Academic Journal Vol.7 No.36, pp. 3149-3161.
24. Talib, F., Rahman, Z. and Qureshi, M.N. (2012),“Impact of Total Quality Management and
Service Quality in the Banking”, Journal of Telecommunications System & Management, Vol.1
No.1,pp.1-5, ISSN:2167-0919.
25. Ganesh,K., Malairajan, R.A., Qureshi, M.N., Anbuudayasankar, S.P.and Barua,M.K. (2012),
“Study and Suggestions on Inbound Logistics of Global Textile Machinery Manufacturing
Organization for Improvement of Vehicle Utilization – A Case Study”, International Journal of
Innovation and Sustainable Development (IJISD), ISSN : 1740-8822, Vol.6 No.3, pp.237-264.
26. Garg, R, Rahman, Z., Ishwar Kumar and Qureshi, M.N. (2012), “Identifying and modelling the
factors of customer experience towards customers' satisfaction”, International Journal of
Modelling in Operations Management (IJMOM), Inderscience, ISSN: 2042-4094, Vol.1 No.4,
pp.359 - 381.
27. Garg, R., Rahman, Z., Qureshi, M.N. and Ishwar Kumar (2012), “Identifying and Ranking
Critical Success Factors of Customer Experience in Banks: An Analytic Hierarchy Process
(AHP) Approach”, Journal of Modelling in Management (JMM), Emerald, ISSN: 1746-5664
Vol.7 No. 2, pp.201 – 220.
28. Malairajan, R.A.,Ganesh,K., Qureshi, M.N., Anbuudayasankar, S.P. and Tzong-Ru (Jiun-Shen)
Lee (2012), “Study of Multi-Commodity Network Flow Problem for the Patient Distribution
10
System”, International Journal of Logistics Systems and Management (IJLSM,), ISSN: 1742-
7967 Vol. 12, No. 1, pp. 70-88.
29. Talib, F., Rahman, Z. and Qureshi, M.N. (2012), “Total Quality Management in Service Sector:
A Literature Review”, International Journal of Business Innovation and Research (IJBIR),
ISSN: 1751-0252, Vol. 6, No. 3, pp. 259-301.
30. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Prioritising the Practices of Total Quality
Management: An Analytic Hierarchy Process (AHP) analysis for the service”, Total Quality
Management and Business Excellence (TQM&BE), Taylor and Francis, ISSN: 1478-3363, Vol.
22, No.12, pp.1331-1351.(IF:1.323)
31. Malairajan, R.A., Ganesh, K., Qureshi, M.N., Sivakumar, P. and Ducq, Y.(2011), “Dialing:
Heuristic to Solve Integrated Resource Allocation and Routing Problem with Upper Bound”,
International Journal of Value Chain Management (IJVCM), ISSN : 1741-5357,Vol. 5, Nos.
3/4, pp.281-303.
32. Talib, F., Rahman, Z., and Qureshi, M.N. (2011),“Assessing the Awareness of Total Quality
Management in Indian Service Industries: an Empirical Investigation”, Asian Journal on
Quality, ISSN: 1598-2688,Vol.12 No.3, pp.228 -243.
33. Talib, F., Rahman, Z., and Qureshi, M.N. (2011),“Analysis of Total Quality Management
Practices in Manufacturing and Service Sectors”, International Journal of the Computer, the
Internet and Management, Vol. 19 No. SP1 (IJCIM), pp.57.1-57.8 ISSN 0858-7027.
34. Talib, F., Rahman, Z., Qureshi, M.N. and Siddiqui, J. (2011),“Total Quality Management and
Service Quality: an Exploratory Study of Management Practices and Barriers in Service
Industries”, International Journal of Services and Operations Management (IJSOM), Vol.10
No.1, pp.94-118, ISSN: 1744-2370.
35. Trivedi, D. B., Raval, H .K .and Qureshi, M. N.(2011), “Application of Design of Experiments
and Analysis of Variance for the Automobile Product Design Parameters”, Journal of Modeling
and Simulation in Design and Manufacturing (JMSDM), Vol.2 No.1, pp.85-92, ISSN:0976-
7827.
36. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Analysis of Interaction among the Barriers to
Total Quality Management Implementation using Interpretive Structural Modeling approach”,
Benchmarking: An International Journal (BIJ), Emerald, Vol. 18 No. 4, pp. 563-587, ISSN: 1463-
5771.
37. G.P.Kurien and Qureshi, M. N. (2011), “Study of Performance Measurement Practices in
Supply Chain Management”, International Journal of Business, Management and Social
Sciences (IJBMSS), Vol. 2, No. 4, pp. 19-34.
38. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “An Interpretive Structural Modeling
Approach for Modeling the Practices of Total Quality Management in Service Sector”,
International Journal of Modelling in Operations Management (IJMOM), Inderscience, Vol.1
No.3, pp.223-250, ISSN: 2042-4094.
39. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “A Study of Total Quality Management and
Supply Chain Management Practices”, International Journal of Productivity and Performance
Management (IJPPM), Vol.60 No.3, pp.268 – 288, ISSN:1741-0401.
40. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “The Relationship between Total Quality
Management and Quality Performance in the Service Industry: A Theoretical Model”,
International Journal of Business, Management and Social Sciences, (IJBMSS), Vol. 1, No. 1,
pp. 113-128.
11
41. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “Pareto analysis of Total Quality Management
factors critical to success for service industries”, International Journal for Quality Research
(IJQR), Vol.4 No.2, pp.155-168, ISSN: 1800 - 6450.
42. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “Integrating Total Quality Management and
Supply Chain Management: Similarities and Benefits”, The ICFAI Journal of Supply Chain
Management, Vol. VII No.4 pp. 26-44, ISSN: 0972-9267.
43. Qureshi, M.N., Kumar, P. and Kumar, D. (2009), “Framework for Benchmarking Logistics
Performance using Fuzzy AHP”, International Journal of Business Performance and Supply
Chain Modelling (IJBPSCM), Vol.1 No.1, pp.82-98, ISSN:1758-9401.
44. Qureshi, M.N., Kumar, P. and Kumar, D. (2009), “Selection of 3PL Services Providers: A
Combined Approach of AHP and Graph theory”, International Journal of Services Technology
and Management (IJSTM), Vol.12 No.1, pp.35-60, ISSN: 1742-7967.
45. Rahman, Z. and Qureshi, M.N.(2009), “Fuzzy Approach to Measuring Healthcare Service
Quality”, International Journal of Behavioral and Healthcare Research (IJBHR), Vol.1 No.2,
pp.105-124, ISSN: 1755-3539.
46. Qureshi, M.N., Kumar, P. and Kumar, D. (2009), “Selection of 3PL Services Provider under
Fuzzy Environment: A Graph-Theoretic and Matrix Approach”, International Journal of
Logistics Systems and Management (IJLSM), Vol.5 No.5, pp.551-573, ISSN: 1460-6720.
47. Qureshi, M. N., Kumar, P.and Kumar, D. (2009), “Selection of Transportation Company: An
Analytic Network Process (ANP) Approach”, The ICFAI Journal of Supply Chain Management,
Vol. VI No. 2 pp. 26-38, ISSN: 0972-9267.
48. Qureshi, M. N., Kumar, P. and Kumar, D. (2009), “Selection of Potential 3PL Service Provider:
A fuzzy QFD Approach”, International Journal of Logistics Systems and Supply Chain
Management (IJLSCM), Vol.1 No.1, pp. 27-39, ISSN: 0974-7206.
49. Rahman, Z. and Qureshi, M.N.(2008), “Developing New Services using Fuzzy QFD: a
LIFENET Case Study”, International Journal of Health Care Quality Assurance (IJHCQA),
Vol.21 No.7, pp.638-658, ISSN: 0952-6862.
50. Qureshi, M.N., Kumar, D. and Kumar, P.(2008), “Decision Support Model for Evaluation and
Selection of 3PL Services Providers”, International Journal of Logistics Systems and
Management (IJLSM), Vol.4 No.3, pp.255-281, ISSN: 1742-7967.
51. Kasture, S., Qureshi, M. N. Kumar, P. and Gupta, I. (2008), “FAHP Sensitivity Analysis for
Selection of Third Party Logistics (3PL) Service Providers”, The ICFAI Journal of Supply Chain
Management, Vol. V No. 4, pp. 41-60, ISSN: 0972-9267.
52. Qureshi, M.N., Kumar, D. and Kumar, P.(2008), “An Integrated Model to Identify and Classify
The Key Criteria and their Role in The Assessment of 3PL Services Providers”, Asia Pacific
Journal of Marketing and Logistics (APJML), Vol.20 No.2, pp. 227-249, ISSN:1355-5855.
53. Qureshi, M. N., Kumar, P.and Kumar, D. (2008), “3PL Evaluation and Selection Under a Fuzzy
Environment: A Case Study”, The ICFAI Journal of Supply Chain Management, Vol. V No. 1,
pp. 38-53, ISSN: 0972-9267.
54. Rahman, Z. and Qureshi, M.N. (2008), “LIFENET Hospitals (India): Developing New Services'
Case Study”, International Journal of Health Care Quality Assurance (IJHCQA), Vol.21 No.3,
pp. 274 – 288, ISSN: 0952-6862.
55. Qureshi, M.N., Kumar, D. and Kumar, P.(2007), “Modeling the Logistics Outsourcing
Relationship Variables to Enhance Shippers’ Productivity and Competitiveness in Logistical
Supply Chain”, International Journal of Productivity and Performance Management (IJPPM),
12
Vol.56 No.8, pp.689-714, ISSN:1741-0401.
56. Qureshi, M. N., Kumar, D. and Kumar, P. (2007), “Performance Evaluation of 3PL Services
Providers using AHP and TOPSIS-Case Study”, The ICFAI Journal of Supply Chain
Management, Vol. IV No. 3, pp.20-38, ISSN: 0972-9267.
57. Rahman, Z. and Qureshi, M.N. (2007), “Integrating the Supply Chain Flows for Business
Effectiveness”, Journal of Studies in Business and Economics (JSBE), Vol.13 No.1, pp. 5 – 20,
ISSN: 1818-1228.
PUBLISHED NATIONAL JOURNAL PAPERS (05)
1. Sama,M.R. and Qureshi, M.N.(2012), “An Application of Value Stream Mapping to Enhance
the Runtime in the machine shop”, The Indian Journal of Technical Education, Sp. issue of the
National Conference on Emerging Vistas of Technology in 21st Century, pp.283-287,
ISBN:0971-3034.
2. G.P.Kurien and Qureshi, M. N. (2012), “A Framework for Maintenance Performance
Measurement and its Bench Marking using Data Envelopment Analysis in Supply Chains”, The
Indian Journal of Technical Education, Sp. issue of the National Conference on Emerging Vistas
of Technology in 21st Century, pp.289-297, ISBN:0971-3034
3. Vaghosi, K.S. and Qureshi, M.N. (2012), “Modeling Vendor Rating in Supplier Selection using
Fuzzy Inference System”, The Indian Journal of Technical Education, Sp. issue of the National
Conference on Emerging Vistas of Technology in 21st Century, pp.225-228, ISBN:0971-3034.
4. Vithalani, C.P. and Qureshi, M.N. (2012), “Quality Function Deployment (QFD):
Translating Customer’s Needs into Technical Requirements for Domestic Refrigerator”, The
Indian Journal of Technical Education, Sp. issue of the National Conference on Emerging Vistas
of Technology in 21st Century, pp.245-252, ISBN:0971-3034.
5. Qureshi, M. N. (2000), “National Vocational Qualification (NVQs)-An Approach Towards
Meeting the Global Skill Needs”, The Indian Journal of Technical Education, Vol. 23 No.4, pp.
61-67, ISSN: 0971-3034.
PUBLISHED INTERNATIONAL CONFERENCE PAPERS (32)
1. Sonigra S. S., Qureshi M. N., Solanki P. (2015). Implementation of Bush boring chamfer to
avoid manual de-burring in Connecting Rod: A Kaizen Approach. International Conference of
AMPD 2015, SVNIT Surat, 10-11 January 2015, (pp. 280-284).
2. G.P.Kurien and Qureshi, M. N. (2015), “Industrial Waste Management: A Sustainable
Approach”, 3rd
International Conference on Gujarat Model of Governance: Lessons & Future
Scope (ICGS-2015)
3. Bulsara H. P., Qureshi M. N. & Patel H. (2014), Exploration and validation of measurement
model for green supply chain performance using factor analysis: a study for Indian Textile
Industry. Paper presented at International Conference on Supply Chain Management organized
by Indian Institution of Industrial Engineering (IIIE) Udaipur Chapter, Udaipur, Rajasthan, India
4. Bulsara H. P., Qureshi M. N. & Patel H. (2012), Supply Chain Performance Measurement – An
Exploratory Study. Paper presented at 1st International Conference on Best Practices in Supply
Chain Management organized by Institute of Technical Education & Research, Shiksha 'O'
Anusandhan University, Bhubaneshwar, Odisha, India
5. G.P.Kurien and Qureshi, M. N. (2012), “Flexibility in Supply Chain and its Measurement Using
Fuzzy Analytic Hierarchy Process”, International Conference on Creating a Sustainable Business:
Managerial Implications and Challenges (ICSBMC-12), Jaipuria Institute of Management, Jaipur
13
during 7-9 Dec., 2012, pp.176-183, ISBN: 978-93-82563-51-8.
6. Qureshi,M.N., Pandey, A.B. and and Upadhyay, D.I. (2012), “A Case on Assembling Line
Balancing By Reducing the Mudas by the Yamazumi Chart”, International Conference on
Information, Knowledge & Research in Engineering, Technology & Sciences-2012, 24-
25,March,2012, ISBN:978-81-906220-3-5.
7. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Identifying the Key Practices of TQM in
Indian Service Industries: An Empirical Analysis” International Conference on Advances in
Supply Chain and Manufacturing Management (ICASCMM 2011”, IIT Kharagpur, India, during
16-18 Dec., 2011.
8. G.P.Kurien and Qureshi, M. N. (2011), “Measurement of Flexibility and its Benchmarking using
Data Envelopment Analysis in Supply Chains”, International Conference on Organisational
Flexibility and Competitiveness at IIM Kozhikode co- hosted by IIT Delhi during 9-12 Dec.,
2011.
9. Qureshi, M.N. and Sama, M. R. (2011), “Eliminating Muda through Value Stream Mapping
(VSM) -A case study of MNC”, International Conference on Industrial Engineering (ICIE-2011)
during 17-19 Nov., 2011, pp.1325-1330, ISBN: 978-93-81361-54-2.
10. Qureshi, M.N. and Vithalani, C.P. (2011), “Crisp & Fuzzy Quality Function Deployment
approaches for Improving Design of Domestic Refrigerator”, International Conference on
Industrial Engineering (ICIE-2011) during 17-19 Nov., 2011, pp.919-925, ISBN: 978-93-81361-
54-2.
11. Qureshi, M.N. and Vaghosi, K.S. (2011), “Designing a Fuzzy Expert System to Evaluate Vendor
Performance”, International Conference on Industrial Engineering (ICIE-2011) during 17-19
Nov., 2011, pp.605-610,ISBN: 978-93-81361-54-2.
12. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “An Empirical Study of Barriers to TQM
Implementation in Indian Service Industries”, International Conference on Industrial Engineering
(ICIE-2011) during 17-19, Nov., 2011, pp.1072-1084, ISBN: 978-93-81361-54-2.
13. Rahman, Z, Qureshi, M. N. Garg R, and Kumar, E. (2011), “An ISM approach for modeling the
factors of customer experience towards customer loyalty”, International Conference on Business
& Technology, FRI University, Dehradun, 04-05 Nov., 2011.
14. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Analysis of Total Quality Management
Practices in Manufacturing and Service Sectors”, The First International Conference on
Interdisciplinary Research and Development (INRIT-2011), Bangkok Metro, Thailand, during 31
May - 1 June, pp. 44.1-44.8.
15. Qureshi, M. N. (2011), “Outsourcing Debacle: A Case Study of Artic Engineering & Technical
Services”, The Ninth Biennial Conference on Entrepreneurship, organized by Entrepreneurship
Development Institute of India (EDI), Ahmedabad, during 16-18, Feb.,2011
16. Garg R, Rahman, Z, Qureshi, M. N. and Kumar, E. (2011), Modelling the Measures of Customer
Experience in Banks, 8th
AIMS International Conference on Management, Indian Institute of
Management, Ahmedabad, 1-4, Jan.,2011.
17. G.P.Kurien and Qureshi, M. N. (2010), “Aligning Performance Measurement Indicators with
Strategic Objectives in Supply Chain Using Analytical Hierarchical Process”, 1st International
Quality Congress & 6th Indian Congress on Quality, Environment, Energy and Safety
Management Systems (ICQESMS), 20-21, Dec.,2010, pp.65-77.
14
18. Sonigra, S.S. and Qureshi, M. N. (2010), Analyzing the Influence of Temperature Variation on
Dimensional Variability of Connecting Rod in Manufacturing, 2nd International Conference on
Production and Industrial Engineering (CPIE-2010), 3-5, Dec., 2010, pp.1435-1442.
19. Qureshi, M. N., and Sonigra, S.S. (2010), “Application of SPC Tools in Maintenance”, 4th
International Conference on Advances in Mechanical Engineering (ICAME), SVNIT, Surat, 23-
25 Sept, 2010.
20. Rahman, Z.and Qureshi, M. N. (2008), “Fuzzy Approach to Measuring healthcare Service
Quality”, Business & Economics society international, 2008 conference, Lugano, Switzerland,
July 15-19.
21. Qureshi, M. N., Kumar, P.and Kumar, D. (2008), “Selection of Transportation Companies: An
Analytic Network Process (ANP) Approach”, International Conference on Transportation System
Studies, (ICOTSS-2008), published in proceedings, University of Mumbai, Mumbai, Jan.10-12.
22. Mittal, D., Qureshi, M.N. and Sachdeva, A.(2007), “Resolving customer satisfaction through
quality function Deployment - a case study of service sector ”, published in proceedings in
“Global Conference on Production and Industrial Engineering (CPIE-2007)” NIT, Jalandhar and
GIFT, New Delhi, Mar 22-27.
23. Qureshi, M. N., Kumar, D.and Kumar, P. (2007), “A Fuzzy QFD Approach to Select 3PL
Services Provider to Support Logistics Services”, published in proceedings in “Global
Conference on Production and Industrial Engineering (CPIE-2007)” NIT, Jalandhar and Global
Institute of flexible Systems Management (GIFT), New Delhi, Mar 22-27.
24. Qureshi, M. N., Kumar, D.and Kumar, P.(2007), “Integrating AHP with QFD for the Selection
of 3PL Services Provider for Shippers’ Requirements”, XI Annual International Conference of
SOM, (AICSOM 2007), published in proceedings, SIOM, Nasik, 2007, Dec.21-23.
25. Qureshi, M. N., Kumar, D.and Kumar, P. (2007), “Performance evaluation of 3PL service
provider - case study” International Conference on Quality Management Practices-
2007"(ICQMP07) published in the proceeding, Mumbai, Aug., 16-17.
26. Qureshi, M. N., Kumar, D.and Kumar, P. (2007),“Naive Bayes Based Vendors’ Trust
Assessment for Better Supply Chain Management”, Int. Conference on Information Systems,
Technology and Management (ICISTM 2007), Institute of Management Technology, Ghaziabad,
March, 12-13, pp.100-121, ISBN:81-8424-182-8.
27. Qureshi, M. N, Kumar, D.and Kumar, P., (2007), “Selection of Potential 3PL Services Providers
using TOPSIS with Interval Data”, IEEE International Conference on Industrial Engineering and
Engineering Management, published in proceedings, Singapore, Dec. 2-5, pp.1512-1516,
ISBN:978-1-4244-1529-8.
28. Qureshi, M. N., Kumar, D.and Kumar, P. (2007), “Performance Evaluation of TQM in Indian
Logistics Industries - A Graph Theory and Matrix Approach”, International Conference on
“Recent Trends in Mechanical Engineering”, published in the proceedings, UEC, Ujjain, Oct. 4-
6, pp.IP6-10, Vol.-II.
29. Qureshi, M. N., Kumar, D.and Kumar, P. (2006), “Trends in Logistics Services: Indian
Scenario”, 4th AIMS International Conference on Management, Indian Institute of Management,
Indore, December, 28-31.
30. Qureshi, M. N., Kumar, D.and Kumar, P. (2006), “TOPSIS Application in 3PL Evaluation under
Fuzzy Environment”, 4th
AIMS International Conference on Management, Indian Institute of
Management, Indore, December, 28-31.
15
31. Qureshi, M. N. (2002), “World Class Manufacturing: A Global Need”, Proceeding of the
International Conference on e-Manufacturing: An Emerging need for 21st Century World Class
Enterprises at Maulana Azad National Institute of Technology, Bhopal, pp.608-613, ISBN:81-
7484-066-4.
32. Qureshi M.N. (2000), “Disordered Accountability of Technical Educational System of India”,
Proceeding of the International Conference on Different Disordered Systems organized by
INDIAS.
PUBLISHED NATIONAL CONFERENCE PAPERS (38)
1. G. M. Sayeed Ahmed, M. N. Qureshi and S. H. Sundarani (2015), Evaluation of Metal Cutting
Forces using Tool Holder Developed by Rapid Prototyping TechniqueSLS,2nd International
Conference on Multidisciplinary Research & Practice.
2. Bulsara, H.P., Qureshi, M.N. and Patel, H.K.(2014), “Exploration and Validation of Measurement
Model for Green Supply Chain Performance Using Factor Analysis: A Study for Indian Textile
Industry, Proceedings of BPSCM ( BPSCM-2014), 22 -23 Nov., Bhubaneswar.
3. Garg, R. Rahman,Z., Qureshi,M.N., and Vinod Kumar (2012), ‘A Journey of ‘Experience’ from
Consumption to Marketing”, National Conference on Emerging Challenges for Sustainable
Business-2012, pp.1098-1123, ISBN: 978-93-81583-46-3.
4. Garg,R., Rahman,Z., Qureshi,M.N. and Vinod Kumar (2012), “Analyzing Customer Experience
Using Service Transaction Analysis in Banks”, National Conference on Emerging Challenges for
Sustainable Business-2012, pp.1143-1161, ISBN: 978-93-81583-46-3.
5. Divesh Kumar, Rahman,Z.,Qureshi,M.N., Ishwar Kumar, and Rajesh Katiyar (2012),
“Sustainability in Supply Chain through Relationship Marketing”, National Conference on
Emerging Challenges for Sustainable Business-2012, pp.1502-1517, ISBN: 978-93-81583-46-3.
6. Faisal Talib, Rahman,Z. and Qureshi,M.N. (2012), “Total Quality Management Practices in
Indian Hospitality Industry: Some Key Findings from Survey”, National Conference on
Emerging Challenges for Sustainable Business-2012, pp.1867-1888, ISBN: 978-93-81583-46-3.
7. Qureshi, M. N. (2011), “A Fuzzy Model for Employee Evaluation and Selection in a
Manufacturing Organization”, National Conference on Employment Scenario in India in the Post
Reforms Period organized by Department of Commerce , M S University of Baroda, during 4-
5,March,2011.
8. G.P.Kurien and Qureshi, M. N. (2010), “Performance Measurement in Supply Chains Using
Balanced Score Card Integrated with Analytic Hierarchy Process”, National conference on
Advances in Mechanical Engineering,(NCAME-2010), Aligarh Muslim University , Aligarh, 27-
28, Nov,2010, pp. 214-222, ISBN: 93-80697-33-3.
9. Zillur Rahman, Qureshi, M. N. and Faisal Talib (2010), “Integrated Model for Prioritizing
Service Quality - Case for Effective Supply Chain”, National conference on Advances in
Mechanical Engineering,(NCAME-2010), Aligarh Muslim University, Aligarh, 27-28, Nov,2010,
pp. 139-144, ISBN: 93-80697-33-3.
10. Mohd. Mohsin Khan,Khusro Qasim Qureshi, M. N, and Sabir Ali Khan. (2010), “Economically
Computerized Welding System”, National conference on Advances in Mechanical
Engineering,(NCAME-2010), Aligarh Muslim University , Aligarh, 27-28, Nov,2010, pp. 112-
116, ISBN: 93-80697-33-3.
11. Mohd. Mohsin Khan, S. H. Sundarani and Qureshi, M. N. (2010), “Adoption of Flexible
Manufacturing System in Industry”, National conference on Advances in Mechanical
Engineering,(NCAME-2010), Aligarh Muslim University , Aligarh, 27-28, Nov,2010, pp. 117-
16
122, ISBN: 93-80697-33-3.
12. Sangani, K.B., Qureshi, M. N. and Karia, M.C. (2010), “Optimizing Energy Consumption
through Energy Auditing- Case study of Chemical Process Plant”, National Conference on
Advances in Materials and Product Design (AMPD-2010), SVNIT, Surat, 22 -23 Nov., 2010,
pp.336-342 , ISBN:978-81-8465-293-2.
13. Qureshi, M. N. (2010), “Attaining Cleaner Productivity through Total Quality Environmental
Management (TQEM)”, All India Seminar on Waste Minimization and Cleaner Productivity, 28-
29, August, 2010, (Paper in CD).
14. Sangani, K. B., Qureshi, M. N. and Karia, M.C. (2010), “Energy Conservation and Audit for
Compressed Air System in a Process Industry -A Case Study”, National Conference on Recent
Trends in Mechanical Engineering 2010 (NCRTME-2010), Datta Meghe College of
Engineering, Mumbai, 28-29 August,2010.
15. Kurien, G. P. and Qureshi, M. N. (2010), “Enablers and Barriers of Military Supply Chain”,
National Conference on Recent Advances in Manufacturing (RAM-2010), SVNIT, Surat, 19-21
July, 2010, pp.305-310, ISBN: 93-80697-05-8.
16. Trivedi, D.B., Raval, H.K. and Qureshi, M.N. (2010),“Taguchi Method for the optimization of
the Automobile Product Design Parameters”, National Conference on Recent Advances in
Manufacturing (RAM-2010), SVNIT,Surat,19-21 July, 2010, pp.204-210, ISBN: 93-80697-05-8.
17. Qureshi, M. N. and Khan, M.M. (2010), “Managing Ergonomically Designed Tools through
Fuzzy QFD”, Ergonomic Research Techniques, MSU, Vadodara, 11-12, Feb.,2010, pp.65-75,
ISBN: 978-81-89547-97-4.
18. Qureshi, M. N. (2009), “Analysing and Selecting Technology Transfer Alternatives towards
World Class Performance”, 39th
ISTE Annual Convention, NITK Surathkal, Mangalore, 18-20,
Dec, 2009, (Paper in CD).
19. Qureshi, M. N. and Khan, M.M. (2009), “Assessment of Human Performance Shaping Factors
for Productivity Enhancement”, All India Seminar on Ergonomics for Improved Productivity
(EIP 2009), Ergonomics Research Division, Department of Mechanical Engineering, AMU,
Aligarh, 21-22, Nov.,2009, pp.198-203, ISBN:93-80043-48-1.
20. Khan, M.M. and Qureshi, M. N. (2009), “A State-of-the-Art in Measuring and Raising
Productivity”, All India Seminar on Ergonomics for Improved Productivity (EIP 2009), pp.191-
197, ISBN: 93-80043-48-1.
21. Nirmal, N. P., Qureshi, M. N. and Qureshi, A. A. (2009) “Fuzzy Expert Decision Support
System for Vendor Selection: A Literature Review & Framework for Development”, The
National Conference on Recent Developments in Computing and its Applications
(NCRDCA 2009), New Delhi during 12-13 August,2009, pp.274-282, ISBN: 978-93-80026-78-7.
22. Qureshi, M. N., Kumar, D., Kumar, P. (2006), “A TOPSIS Methodology to Support Outsourcing
of Logistics Services”, 10th Annual Conference of the Society of Operations Management, IIM,
Ahmedabad, 21-23 Dec.,2006 (Paper in CD).
23. Qureshi, M. N. and Khan, M.M. (2003), “Intelligent Manufacturing System”, Proceeding of 18th
National Conference of Production Engineers on Intelligent Manufacturing organized by
Institution of Engineers(I), Jabalpur Local Centre during 27-28,Dec.,2003, pp.85-89.
24. Agarwal, R. and Qureshi M.N. (2003), ”Supply Chain Management”, Proceeding of World
17
Class Manufacturing, Amrita Institute of Technology and Science, Coimbatore, 7-9 May, 2003
(Paper in CD).
25. Agarwal, R. and Qureshi M.N. (2003), “Total Production through TPM”, Proceeding of World
Class Manufacturing, Amrita Institute of Technology and Science, Coimbatore, 7-9 May, 2003
(Paper in CD).
26. Vegda, R and Qureshi M.N. (2003), “Value Methods: A competitive Strategy for World Class
Operation”, Proceeding of Advances in Manufacturing Technology at N.S.S College of
Engineering, Palakkad., 15-16 Feb., 2003 , pp.36
27. Qureshi M.N. (2002), “Role of Institution as Technology Transfer Centre for R&D, Testing and
Consultancy”, Proceeding of Role of Technical Education for Sustainable Development at ADIT,
New VV Nagar.
28. Agarwal, R. and Qureshi M.N. (2001), “The Crux of Creative Thinking and its impact on
Organizational System”, Proceeding of XXXI, Annual Convention of ISTE and National Seminar
on Integrating Human Values in Technical Education, at Kalinga Institute of Industrial
Technology, Bhubaneshwar, pp.91
29. Qureshi M.N. and Agarwal, R. (2001), “Technological Innovation in Entrepreneurship”,
Proceeding of Creativity and Innovation for Entrepreneurial Development, Raipur Institute of
Technology, Raipur, pp.13-18.
30. Qureshi M.N. (2001), “Enterprise Resource Planning (ERP)”, Proceeding of Modern Methods
for Economic & Quality Production, Nanded.
31. Qureshi M.N. (2001), “Business Process Reengineering (BPR)-Revitalizing Tool”, Proceeding
of Advances in Integrated Manufacturing Systems at MIT, Anna University, Chennai, pp. 304-
308.
32. Qureshi M.N. and Agarwal, R. (2001), “Accessing TQM in Engineering Education”, Proceeding
of Technical Education Transformation to Knowledge Society at Dayalbagh Educational
Institute, Agra.
33. Qureshi M.N. (2001), “Total Quality in Engineering Education”, Proceeding of Total Quality
Management in Engineering Education, Raipur Institute of Technology, Raipur, pp.103-112.
34. Qureshi M.N. and Khan, M. (2001), “Role of IT in Technical Education”, Proceeding of 5th
Annual Convention of ISTE, Gujarat Sec & National Seminar on “Role of IT in Educational
System, pp.11.
35. Desai, A. S., and Qureshi, M. N.(2000), “Factories of the Future”, Proceeding of World Class
Manufacturing Systems at Bundelkhand Institute of Engg & Tech, Jhansi, pp.95-102.
36. Qureshi, M. N.(2000), “Customer Focus- A TQM Survival Approach of New Millennium”,
Proceeding of World Class Manufacturing Systems at Bundelkhand Institute of Engg & Tech,
Jhansi, pp.103-107.
37. Qureshi, M. N. (1999), “Total Quality in Engineering Education”, Proceeding of National
Seminar on Management of Technical Education in the 21st Century, Kongu Engineering
College, Erode,pp.91.
38. Qureshi, M. N. and Bhavsar, K. M. (1999), “Faculty Development”, Proceeding of National
Seminar on Management of Technical Education in the 21st Century, Kongu Engineering
College, Erode,pp.106.
18
Annexure - II
List of International/National Seminars/Conferences/Conventions Attended (40)
1. Participated in State level Seminar on “Manufacturing Excellence”, organized by TATVA
Institute of Technological Studies (TITS), Modasa on 16th
Oct.,2012.
2. Paper presented at National Conference on Emerging Challenges for Sustainable Business-2012
organised by IIT Roorkee, Roorkee During 1-2 June, 2012.
3. Participated in National Conference on Emerging Challenges for Sustainable Business-2012,
DBS, IIT Roorkee, during 1-2 June, 2012.
4. Participated in 3rd
PIMG International Conference on Transformation and Survival of Business
Organisation: Challenges and Opportunities at PIMG, Gwalior, during 28-29 Dec., 2011.
5. Paper presented at International Conference on Advances in Supply Chain and Manufacturing
Management (ICASCMM 2011”, IIT Kharagpur, India, during 16-18 Dec., 2011.
6. Paper presented at National Conference on Employment Scenario in India in the Post Reforms
Period organized by Department of Commerce , M S University of Baroda, during 4-5,March,
2011,
7. Paper presented at the Ninth Biennial Conference on Entrepreneurship, at Entrepreneurship
Development Institute of India (EDI) at Ahmedabad held during 16-18, Feb.,2011. Paper
presented
8. Attended 6th
Indian Congress on Quality, Environment, Energy and Safety Management Systems
and 1st International Quality Congress National Seminar at Baroda Productivity Council,
Vadodara during 20-11, Dec., 2010
9. Attended National Conference on Advances in Materials and Product Design (AMPD-2010), at
SVNIT, Surat during 22-23, Nov.2010
10. Paper presented at All India Seminar on Waste Minimization and Cleaner Productivity,
National Seminar organized by Institution of Engineers (India), Gujarat State Center,
Ahmedabad, during 28-29, August, 2010.
11. Paper presented at National Seminar on Ergonomics Research Techniques organized by
Department of Home Management, Faulty of Family and Community Sciences, MS University,
Vadodara, during Feb.11-12, 2010.
12. Paper presented at All India Seminar on Ergonomics for Improved Productivity (EIP 2009),
Ergonomics Research Division, Department of Mechanical Engineering, Aligarh Muslim
University, Aligarh, Nov. 21-22, 2009.
13. Attended Brainstorming Workshop for curriculum development for post graduate programme
in Product Design Engineering at the National Institute of Design, Ahmedabad on 30th
Oct.
2009.
14.
Paper presented at IEEE International Conference on Industrial Engineering and Engineering
Management, Singapore, Dec. 2-5, 2007.
15. Paper presented at Global Conference on Production and Industrial Engineering (CPIE-2007)
19
NIT, Jalandhar and Global Institute of flexible Systems Management (GIFT), New Delhi, Mar.
22-27, 2007.
16.
Paper presented at International Conference on Information Systems, Technology and
Management (ICISTM-2007), Institute of Management Technology, Ghaziabad, New Delhi,
Mar. 12-13, 2007.
17.
Paper presented at 4th
AIMS International Conference on Management, Indian Institute of
Management, Indore, Dec. 28-31, 2006.
18.
Paper presented at 10th
Annual Conference of the Society of Operations Management, Indian
Institute of Management, Ahmedabad, Dec. 21-23, 2006.
19. Attended IX Annual Convention of ISTE–Gujarat Section and Seminar on “Employing
Technology for Rural Upliftment” at Education Campus, Changa on 5th
Dec, 2004.
20. Attended XXXIII Annual Convention & National Seminar of Indian Society for Technical
Education on “Reaching the Unreached: A Challenge to Technical Education” at Kumarguru
College of Technology, Coimbatore, Dec. 27-30, 2003.
21. Participated in One day Work Shop on “ Short Falls in Industry Institute Interaction - Causes &
Solution” Organized by Directorate of Technical Education, Gujarat State at Gandhi Labour
Institute, Gandhinagar on 18th
Jan. 2003.
22.
Attended XXXII Annual Convention & National Seminar of Indian Society for Technical
Education on “Role of Technical Education for Sustainable Development” at Nitte Mahalingam
Adyanthaya Memorial Institute of Technology, Nitte, Karnataka Dec. 27-29,2002.
23.
Paper presented at International Conference on “e-Manufacturing: An Emerging Need for 21st
Century World Class Enterprises” Participated and Presented paper on “World Class
Manufacturing: A Global Need” at MANIT, Bhopal, Nov. 17-19, 2002.
24.
Paper presented at VII Annual Convention of ISTE –Gujarat Section and Seminar on “Role of
Technical education for sustainable Development” at A.D.Patel Institute of Technology, New
V.V.Nagar on 13th
Oct. 2002.
25.
Paper presented at XXXI Annual Convention & National Seminar of Indian Society for
Technical Education on “Integrating Human Values in Technical Education” at Kalinga Institute
of Industrial Technology at Bhubaneshwar, Dec. 27-29, 2001.
26.
Paper presented at National Seminar on “Creativity and Innovation for Entrepreneurship
Development” at Raipur Institute of Technology, Raipur, Dec. 1-2, 2001.
27.
Attended VI Annual Convention of ISTE –Gujarat Section and Seminar on “Scope of Research,
Testing and Consultation in Professional Educational Institute” at S.V.M.Institute of
Technology, Bharuch on 23rd
Sept. 2001.
28.
Paper presented at National Seminar on “Advances in Integrated Manufacturing Systems
(AIMS-2001)” at Department of Production Engg. MIT, Anna University, Chennai, Feb. 2-3,
2001.
29.
Attended XXX Annual Convention & National Seminar of Indian Society for Technical
Education on “Shaping Technical Education of Future” at Nirma Institute of Technology,
Ahmedabad, Dec. 14-16, 2000.
20
30.
Paper presented at National Seminar on “Total Quality Management in Engg. Education” at
Raipur Institute of Technology, Raipur, Dec. 9-10, 2000.
31.
Paper presented at II International Conference on Different Disordered Systems organized by
INDIAS: 2000 at Allahabad, Dec. 1-3, 2000.
32.
Paper presented at Seminar on “Role of IT in Technical Education and Total Quality in
Technical Education” organized by Dr.S.S. & S. Gandhy College of Engg. & Tech, Surat on
11th
Oct. 2000.
33. Paper presented at 5th
Annual Convention & National Seminar on “Role of Information
Technology in Educational System” at Polytechnic, MSU, Vadodara on 10th
Sept, 2000.
34.
Paper presented at National Conference on World Class Manufacturing Systems (WCMS) held
at Bundelkhand Institute of Engg. & Technology (BIET), Jhansi, Aug. 18-19, 2000.
35. Paper presented at Seminar on the UK-Vocational qualifications (VQs) Pilot Project organized
by Confederation of Indian Industries at AMA, ATIRA Campus, Ahmedabad on May,13, 2000.
36.
Paper presented at XXIX Annual Convention & National Seminar of Indian Society for
Technical Education on “Management of Technical Education” at Kongu Engineering College,
Erode, Dec. 10-12, 1999.
37.
Attended XXVIII Annual Convention & National Seminar of Indian Society for Technical
Education on “Environment and Development” at Punjab Agricultural University, Ludhiana,
Dec. 21-23, 1998.
38. Attended I Annual Convention of ISTE Students’ Chapter at Bapuji Institute Engg & Tech.
Davangere, Oct. 11-12, 1998.
39.
Attended Seminar on “Industry Institute Partnership” sponsored by ISTE (ISTE-CIIP), New
Delhi and Private sectors Industries of Vadodara and M.S.University of Baroda, Aug. 04-06,
1994.
40.
Attended Seminar on “Institutional Management” sponsored by ISTE, Gujarat Section and
Organized by ISTE, B.V.M.Engineering College, Vallabh Vidhyanagar on 17th
Mar. 1994.
Annexure - III
A. ISTE/AICTE Short Term Training Programmes Attended: [22]
Sr.
No.
Name of The Course Programme Conducted by From To
1 Industrial Engineering Mech. Engg. Deptt., Polytechnic, MSU 21-10-91 31-10-91
2 Operation Maintenance of
Equipment in Petrochemical
Engineering
Department of Petrochemical,
Polytechnic, MSU
14-10-92 23-10-92
3 Development of
Learning Resources
Government Polytechnic, Pune
,Maharashtra.
02-05-94 13-05-94
4 Performances Appraisal
System, Helping Students to
Develop better Learning Skill &
Managerial Skill Development
Department of Petrochemical,
Polytechnic. MSU
17-03-97 29-03-97
5 Solar Energy Technology Institute of Engineering & Rural
Technology (IERT), Allahabad, UP
17-03-98 30-03-98
21
Sr.
No.
Name of The Course Programme Conducted by From To
6 Vision Beyond 2000,
Role of Technical Teachers
Gujarat Refinery, Vadodara, Gujarat 18-05-98 30-05-98
7 Computer Aided Design Government Polytechnic, Seoni, MP 07-09-98 18-09-98
8 CAD/CAM Work Station Meenakshi Ammal Polytechnic,
Uthiramerur, Kacheepuram
09-12-99 22-12-99
9 An Integrated Approach to
Flexible Automated
Manufacturing
College of Technology and
Agricultural Engineering, Udaipur
1-7-2000 14-7-2K
10 Recent Development in
Materials Joining
Annamalai University, Annamalainagar 28-05-01 08-06-01
11 Technology & Management Gujarat Oil Refinery, Vadodara 22-10-01 02-11-01
12 Design and Manufacturing
of Composite Components
PSG College of Technology,
Coimbatore
23-06-03 27-06-03
13 Operational Strategies and
Implementation Issues in
Logistics & Supply Chain
Management
Thiagrajar College of Engineering,
Madurai
21-06-04
03-07-04
14 Recent Developments in
Operations Research and its
Application
IIT Bombay, Bombay 05-07-04 09-07-04
15 Recent Trends in Supply Chain
Management
IIT Delhi, Delhi 06-06-05 11-06-05
16 Mathematical Modeling of Real
Life Problems
IIT Roorkee, Roorkee 04-07-05 15-07-05
17 Nano Technology – Nano
Materials & their Applications
IIT Roorkee, Roorkee 06-02-06
10-02-06
18 Knowledge Management for
Effective Teaching
IIT Roorkee, Roorkee 26-06-06
30-06-06
19 Product Design and
Development
IIT Roorkee, Roorkee 09-07-07 13-07-07
20 Numerical Computations using
Software Tools
IIT Roorkee, Roorkee 14-07-07
18-07-07
21 Supply Chain Management IIT Kharagpur, Kharagpur 03-10-07 07-10-07
22 Research Methodology for Ph.D.
Supervisors
Gujarat Technological University,
Ahmedabad
09-06-11 10-06-11
B. Details of ISTE/AICTE/UGC* Short Term Training Programmes Conducted: [06]
No Name of The
Course
Responsibility Target Level No of
Participants
From To
1 Computer Aided
Drafting Coordinator Diploma 30 22-11-99 04-12-99
2 Computer Aided
Manufacturing Coordinator Diploma 30 05-06-2000 17-06-2000
3 E-Commerce &
Internet Coordinator Diploma &
Degree
37 18-06-2000 30-06-2000
4 IT-Application to
Engg. & Tech. Co-coordinator Diploma &
Degree
35 19-11-2000 02-12-2000
5* Advances in Mech.
Engineering Director Diploma &
Degree
30
23-03-2009 28-03-2009
22
6* Research
Methodology Director Diploma &
Degree
30
26-03-2012 31-03-2012
C. Details of Convention & Seminar Conducted: [01]
No Name of The Programme Responsibility Target Level Date
1 5th
Annual Convention (State Level) &
National Seminar on “Information
Technology in Educational System”
Organizing Secretary ISTE Gujarat
Section
10-9-2000
Annexure - IV
Expert Lecture /Talk delivered [31]
Sr.
No.
Name of the Topic Programmes Conducted by Date
1 “Reengineering - Survival Solution
to Problems Causing Sickness in
SMEs”
Entrepreneurship Awareness Camp on
Rehabilitation of Sick Units” held at SVNIT,
Surat
15th
Mar, 2001
2 “Need for World Class
Manufacturing” and “Robotics”
AICTE STTP on World Class Manufacturing for
Polytechnic Teachers
17th
Nov, 2002
3 “Competitiveness in Technical
Education”
Present Technical Education - SWOT Analysis at
SVNIT, Surat
12th
Jan, 2003
4 “Entrepreneurship” Entrepreneurship Awareness Camp on
Development of Ancillaries for Large & Medium
Scale Industries organized by Entrepreneurship
Development Cell, SVNIT, Surat
16th
Jan, 2003
23
Sr.
No.
Name of the Topic Programmes Conducted by Date
5-7 “Supply Chain Management” Analytical Skill Development Training at IIT
Roorkee for Executives of MPSEB
10th
Dec,2007
9th
-10th
, Jan,08
8 “Project Management and Gantt
Charting”
Induction Trainees at Postal Training Centre,
Vadodara
7th
Feb, 2009
9 “Supply Chain Implications of
Concurrent Engineering”
AICTE sponsored STTP on Concurrent
Engineering for Product Design & Development
at GCET, Vallabh Vidya Nagar
26th
Feb, 2009
10-
11
“SCM and Logistics- Challenges” AICTE sponsored STC on Supply Chain
Management-Issues & Challenges at NIT
Jalandhar
15th
Jul, 2009
12 “Mass Production Techniques &
Productivity”
Regional Seminar on Productivity Improvement
Through Application of CAD-CAM & Statistical
Process Control Techniques, Sigma Institute of
Tech. & Engg., Bakrol
26th
Sept,2009
13 “Elements of Mech. Engineering” Vadodara Institute of Engineering, Kotambi,
Vadodara
12th
Nov,2009
14-
15
“CIMS & SCM” UGC Workshop on CIMS organized at
Zakir Husain College of Engg. & Tech., Aligarh
9th
Dec,2009
16 “Quality Function Deployment-
Case Studies’
Nirma Institute of Technology, Ahmedabad 26th
Feb,2010
17 “Traits of Successful
Entrepreneur’
Entrepreneurship Development Workshop by
Parul Institute of Engg. & Tech.
18th
Mar,2010
18-
19
“TQEM and Green Supply Chain
Management”
5th
Refresher Course in Environmental Science,
Gujarat University
4th
June, 2010
20-
21
“Productivity Enhancement Tools
& Techniques I & II”
AICTE sponsored STC on Enhancing
Competitiveness thro’ Change Management at
NIT Jalandhar
10th
June, 2010
22-
23
“World Class Operations-WCM”,
“FMS” and “Management of
Manufacturing Strategy”
Staff Development Programme sponsored by
AICTE, New Delhi at M S University of Baroda
31st May & 1
st
June, 2011
24-
25
“Decision Making in
Environmental Studies, TQM with
reference to Environmental Issues”
6th
Refresher Course in Environmental Science,
Gujarat University
21st June, 2011
26 “Types of Research and their
Relative Importance”
STTP on Research Methodology sponsored by
AICTE, NIT, Ahmedabad
27th
June, 2011
27 “Productivity & Innovation”
Enablers in Changing Economy”
Executives of Heavy Water Project, Vadodara 18th
Feb., 2012
28 “Framework for Manufacturing
Excellence”
State Level Seminar organized by TATVA
Institute of Technological Studies (TITS),
Modasa
16th
Oct., 2012
29 “Modern Manufacturing
Processes”
Nirma Institute of Technology, Ahmedabad,
23rd
Oct.,2012
30 “Total Quality Management” Nirma Institute of Technology, Ahmedabad 23rd
Oct.,2012
31 “Quality through Quality Function
Deployment”
Department of Management Studies, National
Institute of Tiruchirappalli, Tiruchirappalli
4th
Jan., 2013
32 "Decision Making using AHP" Gujarat Technological University 20th
March,2015
(Dr M.N. Qureshi)