· rtf filedimensioning ... the required archicad version.open the pdf guide.open the related...

文库下载免费文档下载https://www.wenkuxiazai.com/

　　本文档下载自文库下载网，内容可能不完整，您可以点击以下网址继续阅读或下载：http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html

ArchiCAD BIM 培训教程ArchiCAD BIM 培训教程

[此处图片未下载成功]

ArchiCAD Training Series. 2ArchiCADthe GRAPHISOFT website at for local distributor andavailability information.Training Series Vol. 2ArchiCAD

(International English Metric Version)© 2013 by GRAPHISOFT, all rights reserved. Reproduction, paraphrasing orwithout express prior written permission is strictly prohibited.

® is a registered trademark of GRAPHISOFT.other trademarks are the property of their respective holders.


Courtesy of GRAPHISOFT

___________________________________________5Opening the Project _____________________________________7Navigation in ArchiCAD

https://www.wenkuxiazai.com/

http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html



__________________________________9Multiplying Elements __________________________________10Creating Curtain Wall Syshttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmltem ____________________________14Modifying Curtain Walls ________________________________18Creating Interior Walls __________________________________25Placing Doors _________________________________________32Mirroring Doors _______________________________________34Creating Stories _______________________________________36Creating Flat Roofs _____________________________________38Creating Parapet Walls _________________________________39Placing Stairs _________________________________________40Dimensioning _________________________________________46Dimensioning _______________________________49Creating Section Viewpoints ____________________________53Elevation Dimensioning ________________________________54Elevation _____________________________________________55Inserting Background Images ___________________________56Placing Objects ________________________________________58Merging Plans ____________________http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html_____________________62Rendering ____________________________________________65Creating 3D Documents ________________________________66Layouting ____________________________________________68Defining Project Info ___________________________________72Exporting to PDF ______________________________________73

to the ArchiCAD Training Series!Guide is part of the ArchiCAD Training Series, which currently includes the following materials:



Vol. 1, The ArchiCAD BIM ConceptVol. 2, Basic ArchiCADVol. 3, Intermediate ArchiCADVol. 4, Advanced ArchiCADVol. 5, Using Teamworkare now reading Vol. 2, “Basic ArchiCAD” a comprehensive hands-on training to familiarize you with the basic modeling and documentation tools of ArchiCAD. This guide is meant for new ArchiCAD users. We strongly recommend that you complete Training Series Vol. 1 before http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlstarting this one.guide is also suitable for using as BIM Curriculum “Exercises” - for Hands-on Practice inwhere ArchiCAD is taught to students. Lecturers who would like to use this guide as a BIM Curriculum should visit the educational sites of the GRAPHISOFT website

() where, after registration, they will be entitled to obtain a full set of training materials suitable for seminar lectures.of this guide:guide e-book: The PDF guide includes detailed explanation of every step, with several screenshots.project file: The preset training file will help your learning process. Preset project views help you to navigate between different steps thus you can focus on the core knowledge.Movie clips: Narrated movie clips are available on the YouTube channel for GRAPHISOFT() providing step-by-step instructions for each step of the http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmltraining guide. The ArchiCAD YouTube Channel can also be accessed from the Help menu of ArchiCAD. Enter the name of this Training Guide in the search field to



locate the related videos.must have ArchiCAD 17 or later version installed on your computer to use this guide. This e-book and the movie clips were made with the English language version of ArchiCAD. For your conveniance we recommend you to download and use the same version for practicing.you do not have ArchiCAD yet, please visit to obtain a free ArchiCAD installer:

If you are a student, a teacher or a representative of a school, register and download a fully functional Education Version of ArchiCAD for Students and Teachers.If you are a professional architect, register and download a fully functional 30-day trial version of ArchiCAD. Projects saved with this TRIAL version can be automatically upgraded to FULL versions upon purchhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlase of a commercial license.contact your local distributor for purchasing commercial ArchiCAD licenses: How to use this training material?

Install the required ArchiCAD version.Open the PDF Guide.Open the related movie clips from the GRAPHISOFT ArchiCAD Youtube Channel.Follow the instructions given in the PDF guide and the videos.hope you will find this training useful and wish you success with your future ArchiCAD projects!Luck!GRAPHISOFT Teamthe Project



goal of this training material is to quickly make you familiar with ArchiCAD’s basic modelling /documentation techniques and the fundamental project organization concepts. In order to shorten the learning curve we’ll start working with predefined project template files, which already include the required project defaults, object libraries and element attributes.://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlrof manually defining every parameter of new elements we’ll use the so-called “Favorites” feature of ArchiCAD. Favorites are preset parameter combinations of ArchiCAD tools, which allow you to store the frequently used building element types in your projects. The project template files used in this training material include the favorites required to complete the modeling steps. Naturally you may also define these parameter combinations manually in the tool setting dialogs. Let’s start modeling by opening the first template file.

Double-click the ArchiCAD application icon on your desktop to start ArchiCAD.

The ArchiCAD startup-screen appears, followed by the Start ArchiCAD dialog box, providing various options.

In the Set up Work Environment pop-up list, select Standard Profile


.: ArchiCAD is shipped with three default Profiles: Standard, Visualization http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmland. These predefined profiles are designed to get you up and running with. Naturally, you or your office CAD manager can reconfigure these profiles as needed.


4Select Open a Project




and Browse for a Solo Project option, and then click Browse to open an ArchiCAD project file.

Select the 01 Pavilion.pln file in the training project folder and click on the Open button to open the file.in ArchiCADNavigation in ArchiCADfirst glance you can see a Slab, a Steel Column, a Section Marker and four Elevation Views in Floor Plan. On the right side of the ArchiCAD interface is the Navigator Palette (Navigator), a tree structure view that lets you build up the entire logical structure of your project and navigate in it. Here you can create folders, then copy, drag and drop views and other project items depending://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlr[此处图片未下载成功]

on their particular purpose.Elements’s see how we can create multiple copies of an element to speed up the modeling workflow.1Select the existing Steel Column in the Floor Plan with the Arrow Tool.

Select Edit/Move/Mirror a Copy menu command.

Define the mirroring axis with two clicks, as if you were drawing a Line.

Move the cursor near the middle of the Slab’s upper edge, and click when the cursor takes on the following shape:

(Arrow with Heavy Checkmark).

Draw the mirroring axis, while holding down the Shift key.



Pick up the settings of an existing column. With the shortcut ALT Click, the cursor will



change to an Eyedropper; click on the column.

Place the two new columns above the Slab.

Select all columns while holding down the Shift key and select Edit/Alighttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmln/Bottom menu command. All selected elements will be aligned to the bottommost point of the selected



group - that is, the bottom column.

9To ensure the columns are all distributed evenly, select all columns and use Edit/Distribute/Along X command.

Select Edit/Move/Mirror a Copy command.

Define the mirroring axis.

The first axis point is the middle of the Slab. Draw the mirroring axis, while holding down the Shift





key.

13Open the 3D Window. Press either F3 key or select the Window/3D Window


command.

Creating Curtain Wall Systembuilding is surrounded by a curtain wall system, so we’ll use the Curtain Wall tool to create it.1Open the Favorites palette choosing the Window/Palettes/Favorites item.

Activate the Curtain Wall tool.://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlar3Double-click CurtainWall from the Favorites palette.: Favorites allow you to save your preferred tool configurations for later use. This way you can access your most frequently used building elements with just one click.

Choose the Polyline - Single Geometry Method from the Info Box.





You have to place the Curtain Wall 6000mm from the left side of the Slab.

Go back to the floor plan (F2) and move the cursor to the upper-left corner of the Slab. Type x6000



and the cursor jumps to the correct position.

Press Enter, move the cursor down, and click when the cursor takes on the following shape: Pencil point with intersection sign.

Click with the Sun cursor to define the “outside” direction of the Curtain Wall. Here, move the



curhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlsor to the left side of the Curtain Wall and click.

In the appearing Place Curtain Wall dialog box, modify the height of the Curtain Wall to 3000mm and click Place.

Create the other three Curtain Walls with the same method according to the first Curtain Wall






and the sides of the Slab.

Modifying Curtain Wallsunnecessary Mullions should be removed from the Curtain Wall.

Select the Curtain Wall in Floor plan with the Arrow tool.

Then click the Edit in 3D button, which appears on the selected Curtain Wall. Another way to enter Edit mode: select the Curtain Wall, then the Design/ Modify Curtain Wall/Edit System command.


When the Curtain Wall is in editing mode, the model is shown in the 3D window.

4Select the middle Mullion frame and delete it.

[ 此处图片未下载成功 ]://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlpar5Drag the Mullion frame.


Select the Mullion frame and drag it with the mouse.



Click when the cursor’s shape indicates it is at the halfway point of the Boundary frame (Arrow with Heavy Checkmark).

Create a new Mullion frame.

Double-click on Mullion Frame in the Favorites palette.Move the cursor to the middle of the Boundary frame. Draw the Frame upside down while holding down the Shift



key.

7Delete the Frame which is on the right side of the Panel.

Replace the middle Panel with a Door.



Select the middle Panel.

Double-click on CW Door 2 in the Favorites palette.



When you have completed your modifications of the selected Curtain Wall, click OK in the Edit



mode http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlDisplay palette to save changes and return to the 3D window.

10



Delete the unnecessary Mullion frames of the other three sides, as shown in the pictures.

Modifying Curtain WallsTraining Series Vol. 2



Creating Interior Wallsworking on the current project or open 02 Pavilion.pln ArchiCAD file from the training project folder.’s place the partition walls to create the rooms of the building.



Select the Wall tool from the Toolbox.

Double-click on Wall 200 from the Favorites palette.

Set the Geometry Method to Rectangular and the Construction Method to inside face.4The corner of the new Wall will be 10.500 mm from the left edge of the Slab and 3.400 mm from the bottom of the Slab.

Move the cursor to the bottom-left corner of the Slab.://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlr6Type the following: x10500



. (Cursor jumps to the right.)

7Type y3400 . The cursor immediately snaps upwards.

Press Enter and move the cursor toward the upper right.

Define the size of the rectangular wall: x7600 and y3600



.

10Press Enter.



You have to edit these walls separately. The solution is to temporarily suspend groups by choosing the Suspend Group toggle icon in the Standard Toolbar, or use the Edit/Grouping/Suspend Groups




command.

12Activate the Arrow tool and select the upper horizontal Wall. Click on theside of the Wall and drag it downwards. Hold down the Shift key tomouse movement vertically.

Define the distance of offset: r800, then press Enter.

http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlDo the same with the other horizontal Wall.

Double-click on Wall 100







in the Favorites palette.

16Choose Single Geometry Method and Center Construction Method (reference line is in the middle) in the Info Box.

Create the new walls so that they divide the existing horizontal wall into three equal. Let’s set the Special Snap Points to display divisions along elements. Select View/Special Snap Options/Division(3)



from Menubar.

18



Draw two walls; the cursor will show you the trisecting points.

19As a final step, we need to erase the middle part of the bottom horizontal wall.




Hold down the CTRL/CMD key and the cursor changes to Scissors.Clickhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html on the middle part of the Wall.

Placing Doorswe’ll create doors in the partition walls.

Activate the Door tool and select Internal Door from the Favorites palette.

Set the Anchor Point to Side 1. The Anchor Point setting defines whether you place the Door by its center point or its side.

You have to place the Door 100mm from the bottom-left corner of the wall. Move the cursor to the bottom-left corner and type x100




.

4Press Enter.

To place the Door, click at the desired opening and swing direction.





Mirroring Doors’s create mirrored copies of the door.

To be able to mirror the Door, first you have to set View/Special Snap Options back to Half.2Select the Door with the Arrow tool.

Activate the Edit/Move/Mirror ahttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html Copy


command.

4Move the cursor near the middle of the upper Wall, and click when the cursor takes on the following shape:




.

Creating Storiesworking on the current project or open 03 Pavilion.pln ArchiCAD file from the training project folder.are fundamental parts of all ArchiCAD projects. Let’s see how to create them.

Go to Design/Story Settings.



Select Ground Floor and click on the Insert above command.

Modify the Story Name to Roof.


4Click OK.

Select the Ground Floor from the Navigator and right-click to bring up its context menu.6Choose Show as Trace Reference.

Note: Trace Reference allows you to display different model views or layouts in theof the active view. This feature helps you to checkhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html the consistency of yourand your model.



You can see the Elements of the Ground Floor in the Roof story.

Creating Flat Roofs’ll model the flat roof of the pavilion using the Slab tool.

Activate the Slab tool.

Select Flat Roof from the Favorites palette.



Create the Flat Roof with the Magic Wand:


Hold down the Space key and the cursor changes to the Magic Wand.Click on the inside of the Ground Floor’s Slab.

Creating Parapet WallsCreating Parapet Walls’ll use profiled walls to model the Parapet Walls of the flat roof. The profile of the Parapet Wall has already been defined in the default project template file with the Profile Manager. (The use of the Profile Manager is explained in the Advanced ArchiCAD Training Guide.)

Select the Wall thttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlool.

Double-click on Parapet Wall in the list of Favorites.

Hold down the Space key and when the cursor changes to the Magic Wand, click on the inside of the Ground Floor’s Slab.


Placing StairsPlacing Stairs’s create a simple straight-run stair with StairMaker, the built-in stair-modeling tool of ArchiCAD.



Double-click on the Ground Floor in the Navigator palette.

Open the Stair dialog box from the Toolbox.

Select the Create Stair


command.

4In the appearing dialog box set the type of the Stair to Straight Run and click on the OK


button.

5Set the following values:

Total height is 1500mm; Flight width is 3500mm; Full length is 2500mm.Structure type is Treads only.


Upper surface material: Stn-Marble White

[ 此处图片未下载成功 ]http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html

; Front surface material: Paint 01; Tread surface material: Paint 01.



Railing type: No Railings.



Finally, you have to define the type of the 2D View.

If you have completed the above tasks, click Save As to give it a name: Pavilion Stair. The Stair is saved in your Embedded Library.

Double-click on the Stair tool and select the Pavilion Stair.

Move the cursor inside the Preview Area: the cursor changes to a “rotate” arrow. Rotate the 2D Symbol to the required position. Define the primary hotspot of the Stair; this will be its left-



upper point.

9Modify the Relative Base Height to -1500 mm.

The Anchor point of the Stair is 2000 mm from the bottom-left corner of the Slab. Move the cursor to the corner and type x2000 . The cursor jumps to the appropriate positiohttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmln.



Press the Enter



key.

Dimensioningworking on the current project or open 04 Pavilion.pln ArchiCAD file from the training project folder.’ll add basic wall dimensions to the project on the floor plan.

Choose the Dimension Tool from the Toolbar.

Select Dim (2.5) from the Favorites palette.

Set the Geometry Method to X-Y Only in the Info Box.

Click on the upper-left corner of the vertical wall, then the bottom-right corner of the other




vertical wall. You can see two reference points.

5In order to finish the dimensioning you have to double-click on an empty



space area.6The next step is to move the Hammer cursor to the position where you want to place the dimension line.



http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlClick on the side of the vertical walls. Two reference points will appear on each wall.

8Double-click on an empty space and move the Hammer cursor to the position where you


want to place the dimension line.

Automatic Dimensioningdimensioning is a very powerful tool that allows you to apply the most typical dimensions on the floor plan views with only a few clicks.

Select all Walls:

Activate the Wall tool.Choose Edit/Select All Walls command.

Click on Document/Document Extras/Automatic Dimensioning/Exterior Dimensioning




command.

3Define the appropriate preferences for the dimensioning.

Click OK.

Define the direction of the dimension lines. You can do this in one two ways:


Click the side edge of an existing Wall (the dimension directionhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html will follow the Wall direction);Click in an empty area, and then click a second time to define the dimension direction.

6Click with the Hammer cursor to place the dimension lines.

Delete the unnecessary dimension lines.

Insert new Dimension points:

Select the Dimension line with the Arrow tool.Then, with the Dimension Tool selected, CTRL/CMD-click on the desired new Reference Point. The new point can be located between existing chain points or anywhere outside the dimension chain.




Create new Dimensions to the Slab and the Stair.

10


The final result should be similar to the one in this picture.

Creating Section ViewpointsCreating Section Viewpointsnew section markers and section views is easy with ArchiCAD’s Section Tool.1Activate the Section tool.

Set the Horizontal Range to Infhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlinite Depth and choose the Single Geometry Method from the Info Box. Set S-02 as ID.

Click twice to define both ends of the Section.

Click on the right side of the line with the eyeball cursor to set the orientation of the Section.5Open the New Section from the Navigator palette. The new Section viewpoint is created and listed automatically in the Navigator Project Map.






Elevation DimensioningElevation DimensioningDimensions allow you to place height markers in Section/Elevation/IE and 3D Document windows.

Activate S/E Dim. (2.5) from the Favorites palette.

Open the elevations, and place individual markers by clicking the points that you want to dimension, then Double-click or click OK in the Control Box. Use the Hammer cursor to



position the marker.://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlparElevationElevationwith Elevations is very similar to Sections. The process is explained in the previous chapter.

Open the South Elevation View from the Navigator palette.





Inserting Background Imagescan improve the elevation view by adding a realistic background image behind it.1Double-click on the Figure tool.

Click the Open button to browse the directory system for image files. Select_cloudy2_photo.jpg file from the ArchiCAD Library/ [BImg] Background Images / Photos 1024x768 folder.

Set the bottom-left Anchor point.

Click OK.


5Place the Figure with a single click.

6Resize the image by using the Pet palette



.

Placing Objectsis shipped with an extensive parametric object library, http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlwhich helps you to quickly improve your model and documentation. Let’s place a few tree objects on the elevations.1Open the Object Default Settings by double-clicking on the Object tool.

Browse for a Tree object from the linked library. There are two ways to do it:



Select the tree object from the ArchiCAD Library /Basic Library /1.7 2D Elements / Plant Symbols folder.Choose the Find Library Parts option to locate library parts by name using keywords in a search engine. Type the “tree” keyword and press the Find button.

Select the preferred Tree object.

Open the Tree Elevation Styles area, and select Style 3. Click OK.



Place the tree object in the Elevation View.

6You have to position the tree object behind the building. To do this, you must change the display order of the object.

Select the object.

://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlar Option 1: Choose the Edit/Display Order/Send Backward command. You may have to run this command twice to achieve the appropriate result.Option 2: Right-click to bring up the element’s context menu, then select the Display Order/Send Backward command twice.





8Create a copy of the tree object. Activate either the Edit/Move/Drag a Copy command or use CTRL Shift D (Windows)/CMD Alt D (Mac) shortcuts.

Replace the type of the tree: double-click on the Object tool and select another tree object



from the folder.

10Place the new 2D People Symbols


in the Elevation View.

Merging Plansfurniture layout is already available in an external ArchiCAD module file. We’ll merge it into our project to shorten the documentation and modeling time.: You canhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html learn more about ArchiCAD modules in other volumes of thisguide series.

Activate the Ground Floor view from the Navigator palette.

Select File/File Special/Merge





command.

13Click Choose Hotlink, and browse for the Furnishing_Plan.mod file and click Open.Click OK in the Choose Hotlink dialog. Click Place module


.

14Until the file is placed, its elements will be surrounded by a dashed rectangle. Click within the rectangle to move the elements to the desired position. Click outside or click OK from the context menu (or the Control Box) to place the elements. Enable showing and unlocking layers, if necessary.



RenderingRenderingoffers you various visualization modes to present your design to your customers. You can select from http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmltwo predefined Rendering Settings from the Navigator palette: the first uses the LightWorks Rendering Engine, while the second works with the Sketch Engine.






Creating 3D Documents3D document is a unique ArchiCAD feature that presents your models with annotations in a 3D perspective or axonometric view. The 3D Document allows you to use the 3D view of the model as the basis for creating a document, to which you can add dimensions, labels and additional 2D drawing elements.

Open the 3D-01 Document from the Navigator palette.



2Select the Dimension


tool.3Activate


Dim (2.5) from the Favorites palette.



Set the position of the Text to Top.

Choose the Dimension Plane from the Info Box:

Horizontal, Verhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmltical, Free Plane

6Set the Geometry Method:

X-Y Only, Any Direction

Place individual markers by clicking the points that you want to dimension, then Double-click or click OK



in the Control Box. Use the Hammer cursor to position the marker.

Layoutingworking on the current project or open 05 Pavilion.pln ArchiCAD file from the training project folder.final documentation layouts are available in the Layout Book. Let’s see how to complete your documentation in ArchiCAD.

Activate the Navigator’s Layout Book.

Double-click on the A.01 Pavilion Layout.

Switch to the Navigator View Map




, which is the second button in the Navigator palette.

4Drag the 0. Ground Floor from the Floor Plans folder and drop it onto the Layout.

Modify the placed layout by using thehttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html Pet palette



. Move the layout to the upper-right corner.

6If you do not want to place the drawings one by one, select the Show Organizer command from the Project Chooser at the top left of the Navigator.

Choose the View Map in the left side of the Navigator and the Layout Book in the right side.8Select each Elevation in the View Map and drag them into the A.01 Pavilion Layout



.

9Place the other drawings (Sections, Roof, Rendering) onto the Layout and arrange them into




the correct position.

Defining Project InfoDefining Project Infocan automatically display Project Info data on all sheets of the layout book. This solution will significantly reduce the time spent on project documentation.

Open the File/Info/Project info dialog box, which containhttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmls the most important information about your project.

If you fill in these fields with the necessary data, the text on the layouts will change automatically.



Exporting to PDFproject documentation can be published in many file formats with just one click of the mouse. PDF is the most widely use document archiving format in the construction industry, so let’s see how to export to this format.

Open the Organizer dialog box from the Project Chooser at the top left of the Navigator.2Click on Publisher Sets to the right side of the Navigator.

Choose the 3 - Pavilion Publisher Set from the list.

Select the A.01 Pavilion Layout.



Define the output format. Files can be saved in a large variety of formats, including all standard image formats and CAD exchange formats. Select PDF file format.


http://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.html[此处图片未下载成功]


Click the arrow next to the publisher set name, to step up a level.

7Set a target folder for the published files in the Path field by clicking the Publishing Properties…


button.

8Click on the Publish button.!have successfully completed this Training Guide! We hope that you have learned many new and exciting things about the possibilities of BIM and understood how ArchiCAD supports the architectural design workflow. Please check the other volumes of this training series for more details about ArchiCAD.you have any questions regarding ArchiCAD or other GRAPHISOFT products, please visit Graphisoft Help Center, our online knowledge base: .Please feel free to contact GRAPHISOFT and its worldwide partners with further questions



at .look forward to seeing you in the ArchiCAD user communihttp://www.wenkuxiazai.com/doc/7824735f3186bceb18e8bb6e.htmlty.


The GRAPHISOFT Team

文库下载网是专业的免费文档搜索与下载网站，提供行业资料，考试资料，教学课件，学术论文，技术资料，研究报告，工作范文，资格考试，word 文档，专业文献，应用文书，行业论文等文档搜索与文档下载，是您文档写作和查找参考资料的必备网站。文库下载 https://www.wenkuxiazai.com/上亿文档资料，等你来发现

