00 神奈川自動車 本文 cs5 - kanagawa prefecture · magnet dc motor” with patent no ......
TRANSCRIPT
KANAGAWAAutomotive
IndustryCompany
Greeting
KANAGAWA Automotive Industry Companies
Kanagawa prefecture, located in the Tokyo metropolitan area which accounts for 33% of the
population and 37% of the economy of Japan, is an attractive area continuing to develop due to a
great number of leading companies and an abundant industrial human resource.
A great number of automotive-related enterprises with high technologies have gathered in Kanagawa
prefecture.
Three organizations, namely, the prefectural government, Kanagawa Industrial Promotion Center
(KIP), and Japan External Trade Organization Yokohama Trade Information Center (JETRO
Yokohama), have joined together to introduce companies from those automotive-related enterprises
that have been recommended by local governments or economic organizations and are particularly
targeted for carrying out or expanding business overseas.
This brochure is published for the purpose of widely spreading the information of these excellent
products of each company and in an effort to create new business opportunities and thereby to
stimulate Kanagawa Prefecture’s industries and economy.
Contents
Automobile Manufacturing (including two-wheeled vehicle) .............................................. 3Bayes Co.,Ltd. ............................................................................................................................................................................................................................................................ 3
Automobile Body and Trailer Manufacturing .................................................................................................. 4KAKUSEI KOGYO CO.,LTD. ............................................................................................................................................................................................................................ 4Shinwa Kogyo Incorporated .......................................................................................................................................................................................................................... 5Shizuka Inc. .................................................................................................................................................................................................................................................................. 6Shonan Design co.,Ltd ....................................................................................................................................................................................................................................... 7YAMAGUCHI WRECKER Co., Ltd. ............................................................................................................................................................................................................ 8YOKOKI Co.,LTD. ................................................................................................................................................................................................................................................... 9
Automotive Internal-combustion Engine Manufacturing ........................................................ 10Flat Field Co., Ltd. ................................................................................................................................................................................................................................................ 10Fuji WPC Co., Ltd. ................................................................................................................................................................................................................................................ 11Hiratsuka Metal Manufacturing Co.,Ltd. .......................................................................................................................................................................................... 12JMC CO.LTD ............................................................................................................................................................................................................................................................. 13Kawasaki Automotive Industry CO.,LTD. ......................................................................................................................................................................................... 14TAIAN INDUSTRY Co.,LTD. ........................................................................................................................................................................................................................... 15Unitech Co., Ltd. ................................................................................................................................................................................................................................................... 16
Automobile Driving, Controlling and Braking Devices Manufacturing .............. 17Aoki Manufacturing Co., Ltd. ..................................................................................................................................................................................................................... 17Chuokoki Corporation ..................................................................................................................................................................................................................................... 18JAPAN GAUGE Co.,Ltd. .................................................................................................................................................................................................................................. 19KYOWA METAL WORKS CO., LTD ......................................................................................................................................................................................................... 20Shounai Kougyo Co., Ltd. ............................................................................................................................................................................................................................. 21TMC System Co.,Ltd. ........................................................................................................................................................................................................................................ 22Yokohama Kobunshi Kenkyujo CO., LTD. .................................................................................................................................................................................... 23
Automobile Parts and Accessories Manufacturing .......................................................................... 24ACR Co.,Ltd .............................................................................................................................................................................................................................................................. 24BL Dynamics Inc. ................................................................................................................................................................................................................................................. 25Daiichi Kinzoku Kogyo Co., Ltd. .............................................................................................................................................................................................................. 26DAISHIN Co., Ltd. ................................................................................................................................................................................................................................................. 27DOUBLE Research & Development CO., LTD. ............................................................................................................................................................................. 28EBARA KOGYO Co., LTD. .............................................................................................................................................................................................................................. 29EISHIN TECHNO CO.,LTD. ............................................................................................................................................................................................................................ 30EXTCOM INC. ............................................................................................................................................................................................................................................................ 31FUJI BELLOWS CO.,LTD ................................................................................................................................................................................................................................ 32Hinode Seisakusyo CO., Ltd ....................................................................................................................................................................................................................... 33IKEUCHI SEIKO Co.,Ltd .................................................................................................................................................................................................................................. 34International Manufacturing & Engineering Services Co., Ltd. ..................................................................................................................................... 35KATANO KOGYO CO.,LTD ............................................................................................................................................................................................................................. 36KEIHIN HATSUJYO Co., Ltd. ....................................................................................................................................................................................................................... 37KMS CO.,LTD ........................................................................................................................................................................................................................................................... 38Koizumi Tool Co.,Ltd. ........................................................................................................................................................................................................................................ 39Lead-giken.,LTD ................................................................................................................................................................................................................................................. 40Matsumura-Kohki Co., Ltd. ......................................................................................................................................................................................................................... 41MIZUKI CO.,LTD. ................................................................................................................................................................................................................................................... 42NIIGATA CORPORATION ................................................................................................................................................................................................................................ 43Ohta Iron Works Co., Ltd. .............................................................................................................................................................................................................................. 44OKAYA SEIKEN Co.,Ltd. ................................................................................................................................................................................................................................. 45Racing Service Watanabe.,Ltd .................................................................................................................................................................................................................. 46SANWA CO.,LTD. .................................................................................................................................................................................................................................................. 47Servoland corporation ..................................................................................................................................................................................................................................... 48Shinko Nameplate Co.,Ltd. .......................................................................................................................................................................................................................... 49SHINKO SENSOR CO., LTD. ........................................................................................................................................................................................................................ 50SHINWA INDUSTRIAL WOOD WORKS CO.,LTD ........................................................................................................................................................................ 51Shoei Kogyo Co., Ltd. ....................................................................................................................................................................................................................................... 52SYNCFOR INC. ....................................................................................................................................................................................................................................................... 53Tashiro Co., Ltd. .................................................................................................................................................................................................................................................... 54TECMO CO.,LTD .................................................................................................................................................................................................................................................... 55ThreeHigh Co., Ltd .............................................................................................................................................................................................................................................. 56Worldwing Co.,Ltd ............................................................................................................................................................................................................................................... 57
Aut
omob
ile M
anuf
actu
ring
(incl
udin
g tw
o-w
heel
ed v
ehic
le)
Aut
omob
ile B
ody
and
Trai
ler M
anuf
actu
ring
Aut
omot
ive
Inte
rnal
-com
bust
ion
Engi
ne M
anuf
actu
ring
Auto
mob
ile D
rivin
g, C
ontro
lling
and
Bra
king
Dev
ices
Man
ufac
turin
gA
utom
obile
Par
ts a
nd
Acc
esso
ries
Man
ufac
turin
g
Corporate ProfilePrelude the electricity-driven era to the world of two wheels.Prelude the EV (electrical vehicles) era to the world by “popularizing electrical vehicles”!!There has been a rise in interest towards environmental protection vehicles to realize an eco-friendly society.With popularization of electric motor scooters, it is assessed that the energy-saving policy of the traffic field will get a new outlook. Of the total domestic CO2 emission from vehicles and other transportation vehicles and carriers is about 20%, and the government sees the need for the reduction of CO2 from such vehicles as most important. A measure that has high expectations is the popularization and expansion of the “next generation environmental protection vehicles” such as the electrical vehicle. It is possible that the style of separating cars and scooters (motorcycles) will become the main stream in the trends of aiming to create a low-carbon society to cope with different situations in our daily life.Because the two wheel vehicles (scooters) are very
pragmatic for short rides, we believe that the electric motor scooter should become more widely spread. We want to contribute for its expansion.
Introduction of promoted products and technologies
Our e l ec t r i c mo to r scoo te rs a re equ ipped w i th “electromobile wheel driving device used for permanent magnet DC motor” wi th patent No. 2001-157314(P2001-157314A), so it is both strong and safe.*Reference: Photo ②
Strength and Characteristics of our products
Electric motor scooters: Cappy I and Cappy II have: ① relatively light weight of only 45kg suitable for the elder and females to drive; ② just turn the handle slot of the three level shift to drive quietly; ③ lovely design and color variations that can expect an award for good design; ④ recommended retail price is 89,800 yen (including taxes) which is reasonable and has many advantages. (details referred to HP)
Corporate Profile
Company Name : Bayes Co.,Ltd.
Location : Shin-yokohama Nara BLD., 10F 2-2-8 Shin-yokohama, Kouhoku-ku, Yokohama-city, Kanagawa 222-0033
Representative : Takashi Fukuda
TEL : +81-45-475-3411 FAX : +81-45-472-8931 URL : http://www.bayesjapan.co.jp
Founded in : Jan 2012 Capital : 66 MILLION JPY Employees : 17
Contact Person
Business sector : Development, manufacturing and sales of electric motor scooters Annual Sales : 200 MILLION JPY
Position/Title : Planner Name : Ichiro Fujisue E-mail : [email protected] Tel : +81-45-475-3411
Photo ③Removable battery The removable battery can be charged by 100V power supply at home.
Photo ②In-wheel motorThe motor is mounted inside the wheel without noise. It has received a patent.
Photo ①Ecology electrical motor scooters CappyⅡGo over 40Km with full charge, strong resistance
An enterprise that comfortably runs to tomorrow.
Bayes Co.,Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Scope of Business : Projects expansion, development and sales of EV as well as development and actual applica-
tion of the power generation and storage machines.
Autom
obile Manufacturing
(including two-w
heeled vehicle)
3
Corporate ProfileIn 1955, the founder, Seiichi Matsumoto, started the manufacture and sales of the chassis of precise parts by way of handmade sheet metal processing. By taking advantage of rich experience, high technology and know-how, the company carried out the production of bus body, construction machine, special vehicles, game machine, billboard, parking facilities, etc. with processed metal plates. We are good with processing parts of various types in small quantities with the general-purpose NC working machine. The products of the factories located at Kanagawa and Ishikawa prefecture are on sale throughout the country. In respect of QCD, we are very proud of its incomparable performance to other companies. On the basis of managerial concept, the company will make every effort to keep on taking the chal lenge brought by “Improvement and Reform” without being satisfied with present conditions to make contribution to the community and the society, as well as create a wonderful working environment of high satisfaction.
Introduction of promoted products and technologies
For the manufacture of metal-steel parts, it is possible to
cut down the in i t ia l cost of the tr ia l products and mass-produced products to the utmost without making expensive jigs by using simple jigs gauge template and by general-purpose machines such as laser processing machine. This production process is being established. By utilizing the technologies that are related to parts of vehicles like buses (optional) and developing under different environments, we are continuously committed to controlling the cost increase of the products of small quantity.We are looking for overseas business partners who can make CADCAM data with trigonometry drawing.
Strength and Characteristics of our products
Photo① ALP shroud: the shroud cover using aluminum 5052s.Parts that are spherically structured is processed by a general-purpose machine. An exclusive model is not used. Photo② Battery truck: on-board battery truck used in hybrid and large-scaled buses. Several pieces can be produced in a year without large jigs. Photo③ Engine hood:metal-steel parts requiring outer plate are available. For bending R, general-purpose model is also used.
Corporate Profile
Company Name : KAKUSEI KOGYO CO.,LTD.
Location : 3-3-6 Shitte Tsurumi-ku, Yokohama-city, Kanagawa 230-0003
Representative : Isamu Matsumoto
TEL : +81-45-572-6216 FAX : +81-45-571-3604 URL : http:// www.kakusei.co.jp/
Founded in : May 1968 Capital : 24 MILLION JPY Employees : 165
Contact Person
Business sector : Manufacture of machinery and appliances for transfer Annual Sales : 3,300 MILLION JPY
Received credentials or certification : ISO 9001、KES Environmental Management System
General planner of metal processing Pursuit of a more ideal variant and variable production.
KAKUSEI KOGYO CO.,LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Photo① ALP shroud Photo② Battery truck Photo③ Engine hood
Position/Title : Managing director Name : Yuji matsumoto E-mail : yuji@kakusei.co.jp Tel : +81-45-572-6216
Scope of Business : Sheet metal processing of bus body, construction machine, special vehicles, game machine,
billboard, parking facilities, etc.
Aut
omob
ile B
ody
and
Trai
ler M
anuf
actu
ring
4
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileSince establishment, our company has been manufacturing all parts of the body of the tip lorry and other special vehicles, and contracting extremely precise machining works of the tip lorry. Also, our company manufactures the parts with strong rigidity. With our policy shown below, we have always borne in our minds to operate the best products (services), so our company has gained high appraisal and trusts from many clients. Company policy: Excellent products need creativity, enthusiasm and supports from our clients.
Introduction of promoted products and technologies
・Body and parts of the tip lorry and other special vehicles;・Bottom open-type dust box; ・Individual production of small batches (customizing).
Strength and Characteristics of our products
With skills built over fifty years, we create the expert machining technology of “precise yet firm” and “accurate yet high qual i ty” parts. Our objective is using this technology to manufacture products. Our company which consists of an operation office and three factories will develop a synergistic effect to provide a one-stop service including procurement of materials, design, manufacturing, inspection and delivery. We ensure and provide high reliability.
Corporate Profile
Company Name : Shinwa Kogyo Incorporated
Location : 1-2-1, Shitte, Tsurumi-ku, Yokohama-city, Kanagawa 230-0003
Representative : Takehiro Takahashi
TEL : +81-45-581-2711 FAX : +81-45-581-2777 URL : http://www.shinwa-skk.co.jp
Founded in : Dec 1957 Capital : 32.5 MILLION JPY Employees : 100
Contact Person
Business sector : Manufacturing of the body and parts of special vehicles, manufacturing and sales of environmental equipment,
maintenance, inspection and repair of the wastes treatment equipment Annual Sales : 1,770 MILLION JPY
Scope of Business : Manufacturing of body and parts of the tip lorry and other special vehicles, manufacturing of all metal products
(mechanical pressing, metal plate and welding), manufacturing and sales of environment-friendly facilities, manufacturing and sales of
wastes gathering container (dust box), inspection and repair of waste treatment equipment.
Position/Title : President Name : Takehiro Takahashi E-mail : [email protected] Tel : +81-45-581-2711
Shinwa Manufacturer is an eco-product maker contributing to an environment-friendly society for the future.
Shinwa Kogyo Incorporated
Heavy tip lorry (body) Long car hopper for transporting cars B-001 dust box (0.9㎥)
Autom
obile Body and
Trailer Manufacturing
5
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileWe began business from a mall factory producing the parts of the railway cars for Shinkansen and defending machines. The motivation of manufacturing the acoustic insulating materials is generated from the strong idea of the proprietor “Creating the original products for the world and human beings”. Our company developed the “Hitori-Shizuka” series of acoustic insulating materials and made it into product. The name of our company is Shizuka which means “tranquil science”. We are a company with unique technology in Japan, and was often interviewed by TV, press and other exclusive magazines. In 2013,we participated in the USA exhibition fairs which let us begin our sales overseas.
Introduction of promoted products and technologies
We mainly produce and sell the “Hitori-Shizuka” acoustic insulating materials based on 11 domestic and international patents, and we have gained many technical assessments in Japan. Besides the patents, our company received the “Environmental Award” from the Japan Society of Civil Engineers, “Technical Award” from the Japanese Society of Mechanical Engineers as well as the “Incombustible Material” indicated by the Minister of the Ministry of Land and Traffic. The different types of products can be prepared according to corresponding frequency and aim of application, so performance and property of the product can be proven by the measured value by the public institutions.
・ Wide frequency band(A type), low-frequency stage (L type), heat dissipation (D type), water stop and hygiene (Z type)
・ Acoustic insulation for express ways, railways, residence and entertainment center [SHIZUKA Stillness Panel]
Strength and Characteristics of our products
Photo ①: Acoustic insulating materials [Hitori-Shizuka] series Because it is a composite material, it is 33mm thick and can absorb and shield all low and high sound. Because this product is built-in type, and it has mechanical property, it brings better sound absorption compared with the previous materials. Also, there is aluminum shrouded on both sides, so it has a good endurance, and is easy to move, water proof, and fire retardant. It is suitable for factories, outdoors, and new buildings. At present, this material can restrain the echo inside a room when installed in big facilities, is used for acoustic walls, and also can be used for the built-in application of products.Photo ②: Audio panel [SHIZUKA Stillness Panel]With the technology of [Hitori-Shizuka] series of the factory, the light thin panels which have the function of absorbing and shielding low and high sound are used in audios. In terms of audios, we consult with currently act ive mixers and musicians to improve i ts performance and specifications. This material was used by Tokyo Modern Art Gallery and exhibit ion fairs abroad in 2012, and received good comments afterwards.We participated in the 135th AES COVENTION in USE in Oct 2013 and received high assessments.
Corporate Profile
Company Name : Shizuka Inc.
Location : 4-6-24 Fukami-nishi, Yamato-city, Kanagawa 242-0018
Representative : Masae kaketa
TEL : +81-46-260-2789 FAX : +81-46-260-2264 URL : http://www.hitori-shizuka.jp/
Founded in : Jan 2006 Capital : 14.3 MILLION JPY Employees : 7
Contact Person
Business sector : Manufacturing of acoustic insulating materials Annual Sales : 60 MILLION JPY
Received credentials or certification : 11 Japanese patents, 1 overseas patent (America, China, South Korea)
Scope of Business : Manufacturing and sales of the acoustic insulating material “Hitori-Shizuka”.
Position/Title : Senior Director Name : Syunji Takahashi E-mail : info@hitori-shizuka.co.jp Tel : +81-46-260-2789
Light and thin acoustic insulating material, wide frequency band acoustic insulatingmaterial with ignition-resistance, therm insulation and moisturizing performance.
Shizuka Inc.
Section of the [Hitori-Shizuka] series panels Audio panel 「SHIZUKA Stillness Panel」
Aut
omob
ile B
ody
and
Trai
ler M
anuf
actu
ring
6
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileWe are a company specializing in production of trial manufacture models and auto models. With combination of digital technology and skills of the craftsmen, we pursue the most suitable manufacturing method. Even through the change in time, we will never forget the spirit of challenging for manufacturing and the pride as craftsmen, and work hard to provide our clients the best quality enterprise. We will keep challenging bravely towards new manufacturing, and not lose our pride as craftsmen to always respond to what clients wish for.
Introduction of promoted products and technologies
During our pioneering period, the craftsmen skillfully operated the universal milling machines, lathes, and the engraving machines to manufacture the trial manufacture products. At present, we use CAD/CAM to make programs and operate the 5 axle machine and molding machine to make h igh prec is ion t r ia l p roducts . The s ty le o f manufacturing has changed from analog to digital, but our passion and pride towards developing new products has
not changed. The manufacturing industry in Japan still has many problems, but we want to face such problems and work hard to polish our technology, protect and improve the environment, and fulfill our social responsibilities.
Strength and Characteristics of our products
Features and strong points of our company:Manufacturing the auto models, processing parts, vacuum casting, coating, printing, surface treatment, modeling, metal dies and molding processing. Services including: industrial design, mechanical design, interference checking, flow analysis of the resin, 3D modeling, environmental quality activities, and quality assurance. Mentioned above are our features and strong points. The following are the products representing the features of our company.
Corporate Profile
Company Name : Shonan Design co.,Ltd
Location : 3-6-1 Hashimotodai, Midori-ku, Sagamihara-city, Kanagawa 252-0132
Representative : Yasuhiko Matsuoka
TEL : +81-42-774-2111 FAX : +81-42-770-7172 URL : http://www.shonan-d.co.jp
Founded in : Dec 1967 Capital : 93.2 MILLION JPY Employees : 90
Contact Person
Business sector : Manufacturing of all trial-manufacture models and auto models Annual Sales : 1,300 MILLION JPY
Received credentials or certification : ISO9001
Scope of Business : Manufacturing of all trial manufacture models and auto models
Position/Title : Director / Overseas Management Division Name : Shinji Nakajima E-mail : homepage@shonan-d.co.jp Tel : +81-70-6968-5706
Clay model CAD workroom Metal dies and processing workshop
AGGRESSIVE ADVANTAGE!
Shonan Design co.,Ltd
Autom
obile Body and
Trailer Manufacturing
7
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileWith designing and manufacturing of trailers and the special vehicles, we have been providing an one and only product for the clients’ usage environment and desire, leaving many results. We have also been successful on the improvement of working property, improvement of operating performance during traction, and lightening of the equipment.Also, our roadside aid service is provided with “Speed & Safety” policy which has gained high reliabilities from many clients.
Introduction of promoted products and technologies
Manufacturing of trailers and special vehicles (customizing system to create the optimum one and only product)
Strength and Characteristics of our products
[Customizing system to create the optimum one and only product ] As the franchised dealer of Miller Japan, we mainly use the vehicle equipment produced by USA Miller Industries for the customizing of products that are suitable for our clients’ usage environment and desire. We will do our utmost to satisfy our clients from basic design to the whole assembly.
Corporate Profile
Company Name : YAMAGUCHI WRECKER Co., Ltd.
Location : 5-23 Hamamatsu-cho, Nishi-ku, Yokohama-city, Kanagawa 220-0055
Representative : Kikuo Yamaguchi
TEL : +81-45-242-6240 FAX : +81-45-250-5887 URL : http://www.yamaguchi-wrecker.co.jp
Founded in : Jun 1986 Capital : 5 MILLION JPY Employees : 14
Contact Person
Business sector : Manufacturing of the bodies and parts of special vehicles and roadside aid service Annual Sales : 500 MILLION JPY
Scope of Business : Design, manufacturing, and sales of trailers and special vehicles in Japan. Import and sales of parts for trailers.
Emergency removal of accidents and accident vehicles/trailer traction and emergency repair on road
Position/Title : Company Executive/ General Manager Name : Koichi Shibuta E-mail : [email protected] Tel : +81-45-242-6240
We will create a completely customized product suitable for your means!
YAMAGUCHI WRECKER Co., Ltd.
Exclusive one and only trailer in Japan: challenger 9909/SDU4 model
Century 5230 model Century 3212 model
Aut
omob
ile B
ody
and
Trai
ler M
anuf
actu
ring
8
Inspection clamps Auto body welding equipment Battery assembling equipment
Domestic big company for inspecting, fixing, and engineering. Strong in designing and manufacturing autos production line.
YOKOKI Co., LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate Profile
Company Name : YOKOKI Co., LTD.
Location : 555, Imaicho, Hodogaya-ku,Yokohama-city, Kanagawa 240-0035
Representative : Hitoshi Yamamoto
TEL : +81-45-351-1211 FAX : +81-45-351-1231 URL : http://www.yokoki.co.jp/Founded in : Jan 1979 Capital : 80 MILLION JPY Employees : 130
Contact Person
Business sector : General machine manufacturing Annual Sales : 2,300 MILLION JPY
Position/Title : Sales engineering Department Director Name : Yasuyuki Saito E-mail : [email protected] Tel : +81-45-351-1211
Scope of Business : Design and manufacturing of the inspection devices for auto bodies, design and manufactur-ing of automatic welding/assembly equipment, design and manufacturing of battery assembly equipment, design and fracturing of aircrafts assembly equipment, manufacturing of modeling dies, engineering in autos manufacturing technology
Received credentials or certification : ISO 9001, ISO 14001, Rewarded as the “model factory of middle and small-sized enterprises in Kanagawa” by Kanagawa governor
Corporate ProfileJuly 1921 Established the Yoshino Wood Dies Manufacturing
Factory in Kanagawa-ku,Yokohama.Jan. 1966 Specified as a reasonable operation model
factory of the middle and small-sized enterprises by the Small And Medium Enterprise Administration
Oct 1991 Renamed as Yokoki Co., Ltd June 2013 Awarded by Public Benefit Juridical Association
of Kanagawa Safety and Hygiene of Labor due to zero hazards in 24 years. Production bases (headquarter, Sagamihara, Hiratsuka), operation place (Nagoya), overseas (local partners available in China and Thailand)
Introduction of promoted products and technologies
We accumulate experiences and special technologies of many years on inspection devices (inspection, clamps and engineering) for auto bodies, which together with the most advanced CAD/CAM/CAE technologies make our company able to provide high quality inspection instruments. Our company is an integrated manufacturer of one-stop specification, conception, design and manufacturing for automatic welding and assembling lines. Recently we are
beginning to expand the technologies related to autos to aircraft manufacturing and other fields. Also, we began to produce the vehicle-mounted battery assembly equ ipment which supports smal l , h igh performance and high quality batteries.
Strength and Characteristics of our products
Photo ①: Design and manufacturing of inspection clampsDesign and manufacture the clamps and devices inspecting the precision of the auto bodies and parts.
Photo ②: Design and manufacturing of the automatic welding / assembling equipment Active 3D design, simulation of robot actions and control simulation; manufacture high quality equipment in short time of delivery.
Photo ③: Design and manufacturing of battery assembling equipmentProvide one-stop serv ice f rom prepar ing specifications, design, manufacturing, settings and operation for the auto-mounted lithium battery assembling equipment.
Autom
obile Body and
Trailer Manufacturing
9
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileBegan to produce commercial CNG autos since 1995, and then developed the EV and FCG. We have already created over 1000 vehicles as our accomplishment.
Introduction of promoted products and technologies
EV system Hybrid Electric Vehicle (using light oil and LPG)
Strength and Characteristics of our products
EV・ Actual travelling distance of the EV bus reaches over
50,000km. ・ Driving experiences in cold area・ Motion accomplishment of non-contact battery vehicles Series hybrid ・ Manufacturing of commercial vehicles providing power
from the vehicle to the building・ Development and application of LPG hybrid system
Corporate Profile
Company Name : Flat Field Co., Ltd.
Location : 3-9-8 Okada Atsugi-city, Kanagawa 243-0021
Representative : Tomoichi Hirano
TEL : +81-46-220-5001 FAX : +81-46-220-0671 URL : http://en.flatfield.co.jp/
Founded in : Nov 1995 Capital : 95 MILLION JPY Employees : 9
Contact Person
Business sector : Development of EV and FCV and development of V2G system Annual Sales : 450 MILLION JPY
Scope of Business : Development of vehicles and systems using the next generation energy
Name : Hirano / Nishida E-mail : [email protected] Tel : +81-46-220-5001
Electromobile Hybrid power vehicle Electromobile
Considering the future with clean energy
Flat Field Co., Ltd.
Aut
omot
ive
Inte
rnal
-com
bust
ion
Engi
ne M
anuf
actu
ring
10
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileWe perform corpuscule projectile surface treatment (WPC treatment) and DLC coating. WPC is a unique Japanese treatment technology which improves the fatigue strength by using the assistance of residual stress of the mechanical structural components of the auto parts as the principle, and the formation of the surface shape (tiny concave) is used to improve the sliding of the lubricant. Also, our company develops wear resistance and high sliding performance technology with DLC coating, and DLC・WPC combined technology. We are actively giving technical support for motor sports through our auto parts, and our accomplishments have been expanded in our industrial parts. We are also aiming for research and development enterprise through joint research with universities and research institutions, and have also gained the Institution Reward as well as other technical rewards.
Introduction of promoted products and technologies
The corpuscule projective method (WPC treatment) is also
called the corpuscule collision method and corpuscule shot-blasting hardening, which is a kind of shot blasting hardening method. The shooting of high speed corpuscules can generate large area plastic deformation on the surface of the material so that it can greatly improve the fatigue strength and lubrication. Also, through composite DLC coating, it can dramatically overpass the performance of single treatments in the past. We mainly do processing and can conduct the most suitable treatment according to the use status of the parts (capacity, lubrication state and material etc) through our accumulated technology.
Strength and Characteristics of our products
WPC i s an exc lus i ve t echno logy o f Japan , and development of DLC・WPC composite technology is the exclusive technology of our company. Treatment (①) of auto parts is especially praised as an accumulation of technical support for racing cars. Also, the development of industrial components such as metal patterns (②) is under active progress. One of the products developed by our company includes the first DLC coated aluminum alloy piston (③) in the world.
Corporate Profile
Company Name : Fuji WPC Co., Ltd.
Location : 4-1-83 Oonodai Minami-ku, Sagamihara-city, Kanagawa 252-0331
Representative : Eiji Shimodaira
TEL : +81-42-707-0776 FAX : +81-42-707-0779 URL : http://www.fujiwpc.co.jp
Founded in : Apr 1997 Capital : 10 MILLION JPY Employees : 13
Contact Person
Business sector : Surface processng of auto parts Annual Sales : --
Received credentials or certification : ISO9001 :2000
Scope of Business : Processing of WPC ® , sales of equipment for WPC treatment, and DLC coating processing
Position/Title : Manager Engineering Div. Name : Masao Kumagai E-mail : [email protected] Tel : +81-42-707-0776
Improve fatigue strength and lubrication of the auto parts
Improve fatigue strength and wearresistance of mechanical structural parts
DLC coated aluminum alloy piston
Fuji WPC surface processing can expand the potential of your car to its extreme limit
Fuji WPC Co., Ltd.
Autom
otive Internal-combustion
Engine Manufacturing
11
Corporate Profile
1940 Established the Hiratsuka Auto Parts Manufacturing
Factory for pistons under the governmental policies
1958 Renamed to be Hiratsuka Industrial Metal Products
Co., Ltd and began to produce aluminum pistons
1963 Rewarded as the excellent enterprise by middle and
small-sized enterprises investigation system of
Kanagawa
2003 Received the ISO9001(2003) certification
2008 In May, was approved to be the indicated enterprise
of Innovative Technology Research and Development
Plan by Kanagawa
Introduction of promoted products and technologies
Hiratsuka Industrial Metal Products Co., Ltd has been a
specialist manufacturer of pistons for almost half a century.
In each era, we have always been bearing in mind the idea
of manufacturing high quality and low cost products to
actively strive for all customers. We will continue to provide
products to improve the social environment and match our
clients’ demands. We also hope to contribute to the
society. We will give our utmost for research, development
and improvement.
Strength and Characteristics of our products
We produce pistons for agricultural machines, construction
machines, ships, and the universal diesel generators as our
leading products with a one-stop production from casting
to machining. Recently the diesel engines have stepped
forward through high performance and cleansing, so we
can provide the pistons suitable for the latest environmental
standards.
Corporate Profile
Company Name : Hiratsuka Metal Manufacturing Co.,Ltd.
Location : 4-71 Tanjougaoka, Hiratsuka-city, Kanagawa 254-0064
Representative : Shinsuke Kato
TEL : +81-463-31-0963 FAX : +81-463-31-0966 URL : http://www.hiratsukakinzoku.com
Founded in : Dec 1958 Capital : 64 MILLION JPY Employees : 130(Jul 2013)
Contact Person
Business sector : Manufacturing of parts of the auto internal combustion engines Annual Sales : 1,800 MILLION JPYJul(Y2007)
Received credentials or certification : ISO 9001:2008
Scope of Business : A specialist pistons manufacturer
Position/Title : Director Name : Yutaka Koitabashi E-mail : [email protected] Tel : +81-463-31-0963
Main products: pistons of the diesel engines Casting equipment line Processing equipment line
When it comes to pistons, it`s the “ART HIRATSUKA” brand.
Hiratsuka Metal Manufacturing Co.,Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Aut
omot
ive
Inte
rnal
-com
bust
ion
Engi
ne M
anuf
actu
ring
12
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate Profile
Company Name : JMC CO.LTD
Location : SumitomofudousanShinyokohama-build 1F 2-5-5 Shin-yokohama Kouhoku-ku, Yokohama-city, Kanagawa 222-0033 Japan
Representative : Daichi Watanabe
TEL : +81-45-477-5757 FAX : +81-45-471-5270 URL : http://www.jmc-rp.co.jp
Founded in : Dec 1992 Capital : 63MILLION JPY Employees : 33
Contact Person
Business sector : Automotive castings, laser lithography Annual Sales : 700 MILLION JPY
Received credentials or certification : ISO 9001
Scope of Business : Aluminum and magnesium sand castings, laser lithography by 3D printer
Position/Title : COO Name : Hiroyuki Suzuki E-mail : [email protected] Tel : +81-45-477-5757
Here we go with Made-in-Japan!
JMC CO.LTD
Casting sample by JMC Non-contact measurement (Color map)Intake manifold
Corporate Profile
In 1992, its organization changed to JMC CO., LTD.
In 2006, it started the casting business (aluminum and zinc).
In 2007, it launched magnesium casting service
Introduction of promoted products and technologies
Precise aluminum and magnesium sand castings
Targeted for the prototype before die-casting in a rapid
delivery period and castings in a small-lot less than 1000
sets per year.
Capable to deal ultra-short delivery time with integrated
production completed inside the company throughout the
year.
Sand casting products with the appearance and high
precision close to die castings, using 50-level sand mold
Manufacturing sand mold prototype in a ultra-short delivery
time by using 3D laminate printer for sand mold
High quality assurance by non-contact measurement
Autom
otive Internal-combustion
Engine Manufacturing
13
As a manufacturer manufacturing the engine-oriented functional parts since its foundation, we offer the prod-ucts satisfying the customer’s needs through our integrated production (high-quality and low-cost) covering the phases from raw material to finished products and the high-mix low-volume production (flexibility).With 4 factories located in 3 countries (Japan, America and Thailand), we have carried out the production activities at the global scale.We were designated as the model factory of Kanagawa Model Factory Association in Kanagawa prefecture.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Piston pin Clutch shaft and shifter rod King pin and spring pin
Kawasaki Automotive Industry CO.,LTD.
Corporate Profile1939 Established as the special manufacturer of con-rod in
Kawasaki city, Kanagawa prefecture.1958 Designated as rationalization model factory by Small
and Medium Enterprise Agency1963 Established Yokohama factory in Yokohama city,
Kanagawa prefecture.1971 Established Fukushima factory in Yama-gun, Fukushima
prefecture1995 KAMIC CORPORATION was founded as the local
subsidiary in Columbus, Indiana, United States2010 THAI KJK CO.,LTD was founded as the local subsidiary
in Sriracha city, Chon Buri province, Thailand
Introduction of promoted products and technologies
Over the years in business since 1939, we have supplied numerous high-precision cylindrical or shaft parts for various countries around the world as the no.1 enterprise.We produce about 2.3 million pieces of those parts from around 920 categories every month ncluding: engine components such as the piston pin and rocker arm shaft; the driving components such as the shaft rod, reverse shaft, clutch shaft, and differential pinion shaft; the chassis components such as the kingpin, and so on.
Relying on the integrated production equipments of cold forging, processing, heat treatment (carburizing, high frequency) and grinding process, and the supporting technological strengths as well as the highly skilled techniques backed with extensive experience, we have reached the target of low-price and high-quality.
Strength and Characteristics of our products
We can meet the requirements from wide range of customers manufacturing diesel engines mainly for trucks, passenger cars, construction machinery, agricultural machinery, and vessels.We own 4 cold forging machines (3 in Japan, 1 in Thailand) which can produce piston pin blanks with size range from φ16 to φ46 mm (=world largest in cold forged piston pins).Machining processing, such as turning, drilling, rolling, broaching and arc welding, are all carried out in our factory. Our 23 carburizing furnaces (11 in Japan, 8 in USA and 4 in Thailand) provide worldwide customers with high quality consistency in case-hardening. Grinding process mainly carried out by centerless grinders, or sometimes by super f inisher depending on customer requirements, can materialize micron by micron controls in surface roughness, roundness, and concentricity with stable production supply and quality consistency.
Corporate Profile
Company Name : Kawasaki Automotive Industry CO.,LTD.
Location : 3159 Izumicho Izumi-ku, Yokohama, Kanagawa 245-0016 TEL : +81-45-802-5521 FAX : +81-45-803-9692 URL : http://k-jk.jp/index.htmlFounded in : Feb 1939 Capital : 50 MILLION JPY Employees : 180(Aug 2013) Representative : Nobuaki Nakajima
Contact Person
Business sector : Auto parts manufacturer Annual Sales : 3600 MILLION JPYReceived credentials or certification : ISO/TS16949-2009 5264400-000, ISO14001-2004 JQA-EM4887 Scope of Business : Manufacture of auto parts (cold forging, processing, heat treatment, and grinding)
Position/Title : Executive Senior Managing Director Administration Dept Name : Naoteru MatsuokaE-mail : [email protected] Tel : +81-45-802-5960
Aut
omot
ive
Inte
rnal
-com
bust
ion
Engi
ne M
anuf
actu
ring
14
Corporate Profile1946 Miyamoto Taizo (the founder) began to manufacture
the water taps in Magome, Ota-ku.1949 Began to make business with the Minsei Diesel (now
UD Trucks) and Isuzu Autos.1967 Began to make business with Mitsubishi Heavy Industries
Kawasaki (today Mitsubishi Fuso trucks and buses) 1968 Newly established Kakuda factory which was moved
to the Headquarter of Kawasaki in 1972.1996 Began business with Hino Autos. Began to
manufacture the safety valve cylinder which is a part shared by these four big companies.
Introduction of promoted products and technologies
・We mainly develop, design, manufacture and sell the oil pressure and pneumatic functional parts of the engines and chassis as well as parts for trucks, buses, and industrial machines. What is unique for our company is that it can finish the procedure from cutting to assembling and also conducting functional tests in the same process so that the functions and quality can be guaranteed. When necessary, it will also do the welding, punching and
grinding. ・Main operating items:
Engine, chassis and industrial machines: oil valve, fuel injection nozzle, air valve, check valve, safety valve, waste cock and other parts.
Strength and Characteristics of our products
Photo ① Fuel spray nozzle: the part for cooling and lubricating the piston. The oil is ejected from the top of the pipe to continuously cool the piston during operation. In order to ensure the smoothness of the oil flow, the check vale and flying ring will be mounted on the engine cylinder block.
Photo ② Oil filter: A device used to filter contamination inside the engine. Different shapes are available for different mounting spaces.
Photo ③ Waste knob: a valve draining the water and rubbish inside the gasholder.Use the operating handle or pull the ring to finish drainage.
Corporate Profile
Company Name : TAIAN INDUSTRY Co.,LTD.
Location : 201 Ichinotsubo Nakahara-ku, Kawasaki-city, Kanagawa 211-0016
Representative : Mitsumori Miyamoto
TEL : +81-44-411-2168 FAX : +81-44-433-8156 URL : http://taian.co.jp
Founded in : Jul 1952 Capital : 10 MILLION JPY Employees : 110
Contact Person
Business sector : Manufacturing of the parts of transport vehicles Annual Sales : 1500 MILLION JPY
Received credentials or certification : ISO 9001, ISO 14001
Scope of Business : Development, design, manufacturing and sales of the parts for trucks, buses, and indus-
trial machines.
Position/Title : Executive Director Name : Takehiro Miyamoto E-mail : takehiro.miyamoto@taian.co.jp Tel : +81-44-411-2168
We will develop new products to fit the needs of the new era, and work hard to take up 100% market share of the special field.
TAIAN INDUSTRY Co.,LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Photo① Fuel spray nozzle Photo③ waste knob Photo② Engine oil filter
Autom
otive Internal-combustion
Engine Manufacturing
15
Scope of Business : Manufacture and sale of core pin for optical connector, optical connector parts, various
punches and pins, various pin gauges, micro-fabrication, high-precision pin, carbide die
components, ultra-precise and micro-fabricated parts, specialized precise jigs, etc.
Business sector : Ultra-precision machining of high-hardness materials including super-hard alloy, with the ultra-
precision cutting, grinding and EDM technologies
Corporate Profile
Our company has been consistently engaged in the
manufacture of ultrafine pins since its foundation in
1984.Through constantly improving our technologies, we
have improved the accuracy of micron-size, which served
as the base for establishing the current trustworthy
relationship with customers.
Introduction of promoted products and technologies
Hollow punch pin for semiconductor ceramic substrate
Core pin and catcher for precise injection mold of optical
connector (highly precise processing technology at
submicron level)
Ultra-precision pin gauge
Micro and precise centerless grinding products
Strength and Characteristics of our products
・Ultra-precise centerless cylindrical grinding technology
with submicron accuracy (±0.1μm)
・Ultra-precise EDM with dimension accuracy from micron
to submicron level
・Ultra-precise processing by three-dimensional CAD and
CAM
・Axisymmetric aspherical lens mold processing using
ultra-precision aspherical surface processing machine
・Sub-micron level ultra-precise measurements supporting
quality assurance
Corporate Profile
Company Name : Unitech Co., Ltd.
Location : 798-1 Kamikasuya, Isehara-city, Kanagawa, 259-1141
Representative : Toshiyuki Miyazaki
TEL : +81-463-96-1132 FAX : +81-463-96-1177 URL : http://www.unitech-net.co.jp
Founded in : Nov 1984 Capital : 42.5 MILLION JPY Employees : 87
Contact Person
Annual Sales : 820 MILLION JPY
Received credentials or certification : ISO9001
Position/Title : General Manager Name : Kazutaka Moteki E-mail : [email protected] Tel : +81-463-96-1132
The skills of our mechanics and our high technology will provide support for ultra-micro processing technology.
Unitech Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Pin for precision grinding mold Micro EDM product Mold parts for lens forming
Aut
omot
ive
Inte
rnal
-com
bust
ion
Engi
ne M
anuf
actu
ring
16
Corporate Profile
For more than half a century, our company has been
building results and trust in the field of autos which is strict
about quality and cost.
Technology and skills built over the years make us capable
of dealing with products for all industries.
Three factories in Shiroishi Miyagi prefecture, one factory in
Yokohama Kanagawa, and one factory in Ohio of USA
(branch)
Introduction of promoted products and technologies
We have:
5 cold forging machines (three national indicated 4-section
and 6-section forging machines and Nakashimada with 2
dies and 3 punching heads)
Many NC turning lathes (other indexes) and many shaft
lathes (MIYANO and so on)
Surface treatment line (Dyed black)
4 HT furnaces (carburization and hardening and tempering)
We also have many exclusive machines
Strength and Characteristics of our products
We provide post processing of blanks and semi-finished
products as well as material supply and finished products.
Able to process forged products, cut products, grinded
products, screws, and others.
The whole process can be done in our factory with
consistent production which has given us high reliability.
Corporate Profile
Company Name : Aoki Manufacturing Co., Ltd.
Location : 4-18 Saiwai-cho, Saiwai-ku, Kawasaki-city, Kanagawa 212-0011
Representative : Jun Aoki
TEL : +81-44-541-3111 FAX : +81-44-541-3114 URL : http://www.aokiss.com
Founded in : Sep 1939 Capital : 32.5 MILLION JPY Employees : 130
Contact Person
Business sector : Metal cutting and cold forging industry Annual Sales : 2,100 MILLION JPY
Received credentials or certification : ISO 9001:2008
Scope of Business : Machining round steels (cutting) and sheet steels (cold forging)
Position/Title : Sales Dept./ Manager Name : Naoki Sato E-mail : [email protected] Tel : +81-44-541-3111
Introduction of some cut products Introduction of the some forgings Otakasawa factory office
Aoki Manufacturing Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
With combination of forging and cutting, our company provides products of high preci-sion and low cost. Our company can make production of small and big batches.
Automobile D
riving, Controlling and
Braking D
evices Manufacturing
17
Corporate Profile
Company Name : Chuokoki Corporation
Location : 6 Kitaya-cho, Nakahara-ku, Kawasaki-city, Kanagawa, 211-0015
Representative : Keiichi Tokano
TEL : +81-44-522-2496 FAX : +81-44-522-2497 URL : http://www.chuokoki.co.jp
Founded in : Nov 1944 Capital : 50 MILLION JPY Employees : 105
Scope of Business : Manufacturing and processing auto parts and parts of medical equipment as well as all
kinds of associated businesses.
Contact Person
Business sector : Precision metal cutting and machining industry Annual Sales : 1,600 MILLION JPY (FY2012)
Received credentials or certification : ISO 9001:2008, JIS Q 9001:2000
Position/Title : President Name : Keiichi Tokano E-mail : [email protected] Tel : +81-44-522-2496
We will process products of any material into any shape!
Chuokoki Corporation
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
parts of medical apparatus and instruments.Provide cutting and machining for many materials such as all steels, aluminum product, stainless steel, pipes, forgings, pressure casting, sinter, casts and lost wax casting.
Strength and Characteristics of our products
As a specialist of many categories and mass production, we ensure the following items:[Manufacturing trial products ] In order to satisfy all demands of the clients, we will make all attempts in the trial product factory to smoothly control any problem points during mass production. [Inspection and quality management] Through the latest digital microscope and image size measuring instrument, we are always prepared to provide high quality and precise products stably.
Corporate ProfileOur company pursues high performance, high quality and high accuracy on precise metal cutting and processing.Currently, machine products have been expanded to original auto products, medical equipment, and operation machines. We can process parts of all kinds of materials. Our company copes with all kinds of metal material to fit current needs. Based on the production system of “clients first” our company will try our utmost to provide products which can meet the clients’ requirement through maintain a suitable world procurement cost and quality.
Introduction of promoted products and technologies
[Main categories] Precision cutting and machining for the engine parts, parts of the fuel injection device parts of the driving system and
Production line in factory Quenched steel: internal diameter range 0.012Coaxial i ty of the internal and external diameters 0.01R o u n d n e s s o f t h e i n t e r n a l diameter 0.003 cylindricity 0.006
Materials hard to cut: external tolerance ±0.005, crossed spot facing work
Lost wax casting materials: C u t t i n g a n d m a c h i n i n g o f deformed products
Stainless steel:Holes inside the internal diameter
Auto
mob
ile D
rivin
g, C
ontro
lling
and
Bra
king
Dev
ices
Man
ufac
turin
g
18
Automatic measuring equipment Straightening machine Imbalance measurement and correction machine
Corporate Profile In 1955, the company was established with the aim of
manufacturing and marketing gauges and jigs. In 1984, General-purpose measuring computer “Jcom”
series were developed. In 1985, Cam profile measuring machine was developed.In 1988, CNC Bore measuring machine (Tribor) was developed.In 2011, JGC(THAILAND)CO., LTD was established.
Introduction of promoted products and technologies
・Manufacture, maintenance and sale of automatic measur ing equipment and automat ic inspect ion apparatus.・Manufacture, maintenance and sale of precise straightening
machine and bend straightening machine.・Manufacture and sale of jigs, inspection tools and gauges. ・Manufacture, maintenance and sale of electric equipment
and automatic control machine.
Strength and Characteristics of our products
・A vast amount of JGC automatic measuring equipment has been and still is used in automobile production lines. The largest number of deliveries in this business sector also proves our engineering power: enabling the selection of workpieces with high precision in the order of submic rons , h igh-speed opera t ions us ing cam mechanisms as required, and compact installation to shorten production lines. ・JGC straightening machine using servo motors have
shown the largest number of deliveries in this field, while our crack detection system using the AE sensor has earned an excellent reputation from clients.・Imbalance measurement and correct ion machine
automatically measures the imbalance of crankshaft and brake disc, and after figuring out the work according to arithmetic processing, it corrects the imbalance by the end mill.
Corporate Profile
Company Name : JAPAN GAUGE Co.,Ltd.
Location : 2-3-14, Shitte,Tsurumi-ku, Yokohama-city, Kanagawa 230-0003
TEL : +81-45-581-3762 FAX : +81-45-583-2333 URL : http://www.yokohama-jgc.co.jp
Founded in : Apr 1957 Capital : 20 MILLION JPY Employees : 63 Representative : Makoto Asada
Scope of Business : Design, manufacture and marketing in Japanese and overseas market of the automatic measur-
ing equipment and its application systems based on precise machining technology and precise
measuring technology together with the mechanical design, control design and computer appli-
cation technology.
Contact Person
Business sector : Design, manufacture and sale of the automatic measuring equipment and its application systems
Annual Sales : 1.62BILLION JPY Received credentials or certification : ISO 9001, ISO 14001
Position/Title : Deputy manager of Sales Department Name : Takuro Asada E-mail : [email protected]
Tel : +81-45-581-3762
JAPAN GAUGE Co.,Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Our main product lines are automatic measuring equipment and straightening machine for shaft which are widely used in the production lines of engine, transmission and suspension plants of automobile industry. We receive high assessment from our customers.
Automobile D
riving, Controlling and
Braking D
evices Manufacturing
19
Corporate ProfileIn 1947, it manufactured and sold sealing parts and copper
alloy metal parts for autos.In 1959, it began to provide synchronizer rings for Nissan
autos.In 1992, it gained the industrial and technological development
a w a rd o f K a n a g a w a C o u n t y b e c a u s e o f developing the iron resin composite synchronizer ring.
In 1995, it established a joint venture Wuhan Kyowa Synchronizer Ring Co., Ltd in Wuhan China.
In 1999, it developed and provided the rod synchronization structure.
In 2005, it established the joint venture Kyowa Synchro Technology Europe in France(Paris).
In 2012, it established the joint venture Kyowa Natesan Synchro Technologies in India(Chennai).
In 2012, it established the sole proprietorship Kyowa Synchro Technology Indonesia in Indonesia(Jakarta)
Introduction of promoted products and technologies
With over 60 years of long manufacturing history our c o m p a n y h a s b e e n s p e c i a l i z i n g i n d e v e l o p i n g , manufacturing and selling the synchronizer rings for the manual gearboxes for the light cars as well as heavy trucks. The products of our company are broadly available on the markets. In order to realize a feeling of “lighter ,quicker and more fun ” shift, our company has made some many attempts to provide universal products for the whole auto world. At present, our company has taken about 10% share of the synchronizer ring market including some overseas group companies, and will continue to provide synchronizer rings of better quality for our clients.
Strength and Characteristics of our products
The synchronizer lever solely developed by our company improves shift performance, reduces the cost and lightens the structure, so it gains high evaluations and trusts from the Japanese clients as well as overseas clients.
Corporate Profile
Company Name : KYOWA METAL WORKS CO., LTD
Location : 17-4 Torihama-tyo Kanazawa-ku Yokohama-city Kanagawa
Representative : Takashima Masumi
TEL : +81- 45-772-1331 FAX : +81- 45-772-1338 URL : http://www. kyowagokin.co.jp
Founded in : Jan 1947 Capital : 411.87MILLION JPY Employees : 150
Contact Person
Tel : +81-45-772-1331
Business sector : Auto parts manufacturing and sales Annual Sales : 4,284 MILLION JPY
Received credentials or certification : ISO9001(1999), ISO14001(2006), Gain 2008 annual TS16949
(quality management system) certification.
Scope of Business : Development, manufacture, and sales of automotive parts (Synchronizers, shift forks, etc.)
Position/Title : Administration Dept General Manager Name : Koji Numata E-mail : [email protected]
Kyowa Metal works contribute to global society.
KYOWA METAL WORKS CO., LTD
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Synchronizer Rings for manual gearbox Structure of the synchronizerThe Synchronizer Ring of our company is used under the MT shift knob.
Auto
mob
ile D
rivin
g, C
ontro
lling
and
Bra
king
Dev
ices
Man
ufac
turin
g
20
Corporate ProfileThe average age of our staffs is 41 years old, so our factory full of young and expert craftsmen. We will respond to clients’ requests in a speedy manner.We have collected the experts from each field. Our characteristic is quick production.
Introduction of promoted products and technologies
Important safety parts (brake pedal, clutch pedal, and accelerator pedal)
Processing and batch production of trial manufacture products with sheet-metal processing and machining processing.Drawing deep processing with hydraulic punching machine.
Strength and Characteristics of our products
[Trial manufacture production ---- a technology of creating new shapes]The combination of plate metal technology and cutting technology can create trial manufacture products and batch production of all kinds. When making the trial manufacture products, we transform the ideas into shape within the limited time. 3D printing can visualize the trial manufacture products so that the clients can feel more confident when designing.
Corporate Profile
Company Name : Shounai Kougyo Co., Ltd.
Location : 1-16-29 Yoshioka-higashi, Ayase-city, Kanagawa 252-1125
Representative : Hiroyuki Abe
TEL : +81-467-76-2703 FAX : +81-467-76-2527 URL : http://www.shounai.co.jp
Founded in : Mar 1975 Capital : 3 MILLION JPY Employees : 19
Contact Person
Business sector : Manufacturing of transportation equipment and trial manufacture products processing.
Annual Sales : 250 MILLION JPY Received credentials or certification : ISO9001
Scope of Business : Precise trial manufacture plate metal 2D and 3D laser machining NC processing (machining)
Position/Title : President Name : Hiroyuki Abe E-mail : [email protected] Tel : +81-467-76-2703
Make the best products within limited time, and pursue to the processing of trial manufacture products of ideal shapes.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
3D products and metal plates Accelerator and brake pedals3D laser machining scene
Shounai Kougyo Co., Ltd.
Automobile D
riving, Controlling and
Braking D
evices Manufacturing
21
Corporate ProfileThe name of our company comes from the initial letters of Trial Manufacturing Company. Grasping the needs of and providing solutions for the market through high technology, we exceed the original structure use creative approaches. We believe that providing higher technology will create a better environment, r icher society and bring more happiness to people. Based on this idea, we take the improvement of our staff and technicians as the important matter and committ to the education of social ethics containing a broad content.
Introduction of promoted products and technologies
The main business of our company includes customized development of testers and experiment observation machines/ mechanical design and development/software development/design and development of electrical equipment and electrons. The devices solely developed by our company includes hammering micro-vibrat ion d e v i c e / p re c i s i o n m i c ro - s l i d i n g t e s t e r / t a p p i n g
machine/hand-held air compressor. Other experiments include research and development of industry-academy cooperation with universities
Strength and Characteristics of our products
In recent years, we have worked hard to study the test equipment with the themes “vibration of electr ical connection and sliding effect” and “industry-academy cooperation”. The equipment used for surveying vibration of electrical connection and sliding effect includes [hammering micro-vibration device (photo ① ) ] and [precision micro-sliding testing machine (photo ②)] as well as the [tapping machine (photo ③)] which can be vibrated with a certain strength. Also, with the industry-academy cooperation, we are strengthening in research on new energy. Application of unused water resource in rivers, streams, and factory drainage rather than external energy is gentle to the environment.
Corporate Profile
Company Name : TMC System Co.,Ltd.
Location : 1-6-1 Hon-cho, Kawasaki-ku, Kawasaki-city, Kanagawa 210-0001
Representative : Hiroshi Matsumoto
TEL : +81-44-211-6551 FAX : +81-44-211-4200 URL : http://www.tmcsystem.co.jp
Founded in : Oct 1960 Capital : 50 MILLION JPY Employees : 160
Contact Person
Business sector : Design and development of precision testers and experiment observation machines
(manufacturing electrical measuring instruments) Annual Sales : 1,111 MILLION JPY
Scope of Business : Trial manufacture, research, and development of precision testers and experiment observation
machines (Development of our own products/entrusted development/ development supports)
Position/Title : Executive Director Name : Hiroaki Kubota E-mail : tmc_busi@tmcsystem.co.jp Tel : +81-44-555-6171
We will support your innovation!
TMC System Co.,Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Tapping machineHammering micro-vibration device Precision micro-sliding testing machine
Auto
mob
ile D
rivin
g, C
ontro
lling
and
Bra
king
Dev
ices
Man
ufac
turin
g
22
Corporate ProfileFluoroelastomers refer to those that are often used in the peripheral parts of engine (oil seal, O-shaped ring, packing, hose, etc). We started as a manufacturer specializing in adhesives for fluoroelastomers, and now also operate the business on paints and curing co-agent with the keyword “Application of Fluoroelastomers”. Through providing excellent service and developing products suitable to customers’ circumstances and usage methods, we are devoting ourselves to becoming a leading manufacturer that differentiates from other large makers.
Introduction of promoted products and technologies
Our main products are adhesives for fluoroelastomers and fluoroelastmer paints. We manufacture and distribute with the trademark of Monicas®.Especially in the adhesives of Fluoroelastomers, we are working to strengthen our expertise as the one and only specialized manufacturer in the world. Furthermore, we do customizing and developing new products to meet the
needs of all customers. Please feel free to contact us anytime. Also, by providing the master batch of curing agent and co-agent for fluoroelastomer in an affordable price, we can also make a contribution to the cost-down and performance improvement for customers.
Strength and Characteristics of our products
Photo ① through the grade selection in a reliable way, it is possible to conduct the bonding on all fluoroelastomers that are available in the market.
Photo ② the fluoroelastomer paints have weather resistance and adhesion property at the same time. The main purposes are wide: coating agent for cylinder head, sealing agent and adhesive for the fuel hoses bulge and fluoroelastomer hoses, many types of caulking agents and the like.
Photo ③ the curing agent and co-agent for fluoroelastomers are sheet-like and easy to handle. Since the control of vulcanization density and vulcanization rate becomes easier, the thorough control on workability and physical property is possible.
Corporate Profile
Company Name : Yokohama Kobunshi Kenkyujo CO.,LTD.
Location : 8-50-16, Shinyoshidahigashi, Kouhoku-ku, Yokohama-city, Kanagawa 223-0058
Representative : Koji Hara
TEL : +81-45-543-2721 FAX : +81-45-545-2821 URL : http://www.monicas.co.jp/
Founded in : Jan 1979 Capital : 10 MILLION JPY Employees : 20
Photo ① adhesives for fluoroelastomers Photo ② fluoroelastomer paint Photo ③ masterbatch of curing agent and co-agent for fluoroelastomers
Yokohama Kobunshi Kenkyujo CO.,LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Our company is a world unique manufacturer specializing in adhesives for fluoro-elastomers, with Monicas® as our own brand.
Contact Person
Business sector : Chemical industry Annual Sales : 400 MILLION JPY
Received credentials or certification : ISO 9001
Position/Title : Vice-President Name : Toshio Hara E-mail : t-hara@monicas.co.jp Tel : +81-45-543-2721
Scope of Business : Manufacture and distribution of adhesives for fluoroelastomers, fluoroelastomer paint and
master batch of curing agent and co-agent for fluoroelastomers.
Automobile D
riving, Controlling and
Braking D
evices Manufacturing
23
Corporate Profile
We are mainly engaged in the research, development,
manufacture and sales of diesel engine exhaust gas
puri f icat ion device for motor vehicles. Located in
Kanagawa prefecture, we have a great deal of transactions
with major car makers. The quality of our products is highly
evaluated and our business is substantially expanding year
by year. Through the research and development of exhaust
gas purification system, we endeavor to provide services
that can contribute to the society. We have completed the
commercialization of efficient generator motor and inverter
for the popularization of electronic vehicles to prevent
global warming.
Introduction of promoted products and technologies
・ACR EXCAT(Oxidation Catalytic Device)obtained the
particle substance reduction system certification by eight
prefectures and cities around Tokyo【066-C】. ・NOx・PM Reduction system has received the approval of
Ministry of Land, Infrastructure and Transport.
・ACR NXPR(MLIT-NPR-9) was certified as designated
particle substance reduction system by eight prefectures
and cities.
・generator motor and inverter for EV
Strength and Characteristics of our products
・On the basis of “Exhaust Gas Post Treating Technology”,
“Engine Control Technology” and “Engine Evaluation
Technology ” developed for many years, the company
continuously starts the research and development of new
diesel engine exhaust gas purification device.
photo ①、②・Efficient generator motor and inverter for electronic motor
vehicles are being commercialized.
photo ③、④
Corporate Profile
Company Name : ACR Co.,Ltd
Location : 3-4-14 Chuuourinkan Yamato-city, Kanagawa 242-0007
Representative : Hiroshi Matsuoka
TEL : +81-46-284-1171 FAX : +81-46-284-3672 URL : http://www.acr-ltd.jp
Founded in : Sep 2004 Capital : 30 MILLION JPY Employees : 50
Contact Person
Scope of Business : Research, development, manufacture and sales of exhaust gas purification device for motor
vehicles.
Research, development, manufacture and sales of generator motor and inverter for electronic
vehicles.
Business sector : Manufacture, sales, research and development of parts for motor vehicles.
Annual Sales : 500 MILLION JPY Received credentials or certification : ISO 9001(2006)
Position/Title : Director Name : Keiji Kishishita E-mail : [email protected] Tel : +81-46-284-1171
photo ① NOx・PM Reduction System
photo ② PM Reduction System with Wire Mesh Filter
photo ③ Generator Motor for Electric Vehicle EV
photo ④ Inverter for Electric Vehicle
Systematic Development of Diesel Exhaust Gas Treatment System and EV Component Parts
ACR Co.,Ltd
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
24
Corporate Profile
As the manufacturer of micro bubble generator, we are
engaged in completing and expanding the line-up of
various products.
For auto industry, we have accumulated considerable
experiences with the circulating water pool in wet paint
booth of leading parts manufacturers including auto body
manufacturer.
Introduction of promoted products and technologies
The issues with the circulating water pool of wet paint
booth can be summarized to the following three points:①cleaning and maintenance cost, ②chemical agent cost, ③odors
With our product “Nano BL” in the circulating water pool,
the micro bubbles can disperse in the circulating pool and
improve the environment inside the pool.
By efficiently preventing the paint solids from sticking to the
pool or clogging the pipe, facilitating the dispersion of
chemical agents, controlling the growth of anaerobic
bacteria which causes the odors, we can bring a definite
improvement in solving the aforesaid issues.
In this way, we can help you out of the dirty, smelling and
costly situations of the painting field.
Strength and Characteristics of our products
・Compact-sized device is easy for holding, carrying and
installing
・Requires no external devices such as compressor due to
its self-contained air supply system
・No need for worry about the clogging of paint solids
・Operation continuity for a long period is possible
Corporate Profile
Company Name : BL Dynamics Inc.
Location : 871 Higashiyamada-cho Tsuzuki-ku, Yokohama- city, Kanagawa 224-0024
Representative : Kazuhiko Sakakibara
TEL : +81-45-593-8886 FAX : +81-45-534-7604 URL : http:// www.bldynamics.com
Founded in : Oct 2009 Capital : 15 MILLION JPY Employees : 4
Contact Person
Business sector : Manufacture of environmental improvement equipments
Scope of Business : Micro bubble generator manufacture, cleanup system for circulating water pool of wet paint
booth, solutions to electricity saving measures during drainage treatment.
Position/Title : Oversea business Name : Ichioka Atsushi E-mail : [email protected]
Tel : +81-45-593-8886
Photo ①Product Appearance
Photo ②Operating status
Photo ③BL-1
Microscopic air bubble and micro bubble generation systems from BL Dynamics
BL Dynamics Inc.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
25
Corporate ProfileWe started from a factory in Kawasaki, and then expanded to Gunma factory in May 1972 and Guangzhou China in Dec. 2004 respectively, and now are gradually expanded to the world. (Huasite (Guangzhou) Auto Parts Co., Ltd: located in Dongfeng road west, Huadu Auto City, Guangzhou, Tel: 86-20-86733311.)
During this period, we have been researching and working hard to provide products of better quality. With our products, we want to satisfy our clients even more and contribute to the society.
Introduction of promoted products and technologies
・Parts of locks related to autos (for seats/brake, car body, keys/door handle, auto A/C, suspension frame, and shock absorber)
・Die casting products (parts of the auto lock)
Strength and Characteristics of our products
Establishing a consistent and quality assured system, we prepare our products following an universal criteria for quality and procedure manuals while keeping high quality and reliability to realize a stable production of products with better quality.
Corporate Profile
Company Name : Daiichi Kinzoku Kogyo Co., Ltd.
Location : 100 Furukawa-cho, Saiwai-ku, Kawasaki-city, Kanagawa 212-0025
Representative : Yoshihiro Sugaya
TEL : +81-44-555-0451 FAX : +81-44-511-5530 URL : http://www.daiichi-kinzoku.com
Founded in : Aug 1955 Capital : 40 MILLION JPY Employees : 86
Contact Person
Business sector : Press working and metal die processing Annual Sales : 700 MILLION JPY
Received credentials or certification : ISO9001, ISO/TS 16949
Scope of Business : 1. General pressing, metal dies manufacturing and springs of all kinds. 2. Processing die casting products as well as manufacturing and sales of all parts.
3. Manufacturing and sales of the auto lock assembly, hardware and locks for overseas buildings,
lockers with insert-coin locks, and parts of electrical instruments.
Position/Title : CEO Name : Yoshihiro Sugaya E-mail : [email protected] Tel : +81-44-555-0451
Punching machine (300t,150t,80t,35t) Part of the production site(a new 400t punching machine, two 300t punching machines and a cascade punching machine)
We provide products of better quality through constant studying and effort.
Daiichi Kinzoku Kogyo Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Parts of the locks for autos
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
26
Corporate Profile
The founder of th is company got the approval of
manufacturing the rolling flat dies in 1949, and gained real
success in 1956 (year of establishment), thereafter as a
pioneer of thread rolling flat dies, our company gained a lot
of actual successes with a consistent heart.
We from the beginning have been performing research and
development of the rolling metal dies for screw making,
and provided necessary dies of screw making for other
companies of the same field. We are especially good at
customized products of small batches and precise screw
products. We have superb technology which other
companies of the same field cannot compare with and
have gained many accomplishments.
Introduction of promoted products and technologies
Dies for small screws, dies for wood and tapping screws,
dies for triangular forming screws, form rolling dies,
knurling dies, combination dies, and customized dies.
Minitype screws (for rolling the diameter 0.3mm screws,
smallest in the world)
[Able to make the dimensions of the metal dies]
250 Max dimension of the template (mm): thick50 height
105 (changed based on types) Moving length 250
Min screw pitch of the screw: 0.1mm (changed based on
the types of the screw) Material of the template: die steel
and high-speed steel
Strength and Characteristics of our products
We can not only make the dies for making screws of
special arc beyond standards but also customize dies
according to samples of the screws.
We can also give design and recommendations if given any
specifications (external diameter, diameter of the root,
screw pitch and arc).
We can also calculate the diameter of the rolled blanks.
Please experience the accuracy, speed and low-carbon
cost of the rolling flat dies in various fields such as weak
current, construction, autos, precise machines, and
medical treatment.
Corporate Profile
Company Name : DAISHIN Co., Ltd.
Location : 2-2-29 Kandai, Tsujidou, Fujisawa-city, Kanagawa 251-0041
Representative : Nobuhiro Shimada
TEL : +81-466-36-8898 FAX : +81-466-34-5374 URL : http://www.daishin88.co.jp
Founded in : Sep 1956 Capital : 36 MILLION JPY Employees : 27
Contact Person
Business sector : Rolling dies manufacturing Annual Sales : 500 MILLION JPY
Received credentials or certification : ISO 9001:2008
Scope of Business : Designing, producing and sales of flat rolling dies for screw making
Position/Title : Design Dept. Name : Kenjiro Sugino E-mail : [email protected] Tel : +81-466-36-8898
The world's smallest rolling screw diameter 0.3mm All kinds of rolling flat dies
Independent design and manufacturing technology of the rolling flat dies
DAISHIN Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
27
Corporate ProfileDOUBLE not only pursues our own profits but also hold the objective of “develop and prosper together with our clients, and be a company that benefits our clients”. With our “bright ideas for manufacturing” as our basis and our basic technologies and theories with the corporat ion of universities and research institutions, our unique feature is the development, utilization, and proposals for a one and only product.
Introduction of promoted products and technologies
Our product was rewarded in the 29th (2012) Kanagawa Industrial Technology Development Competition The robot (D-Hand) with one engine can grasp objects of all shapes.
・ One motor can move three fingers.
・ Just like human fingers, when one joint stops moving another joint moves, so that it can be suitable for any shape.
・ Succeed on reducing engines and parts, so it is easy and simple to operate.
Corporate Profile
Company Name : DOUBLE Research & Development CO., LTD.
Location : 920-7 Kurihara Zama-city, Kanagawa 252-0013
Representative : Hiroshi Wada
TEL : +81-46-206-5611 FAX : +81-46-253-7711 URL : http://www.j-d.co.jp
Founded in : Oct 1977 Capital : 10 MILLION JPY Employees : 15
Contact Person
Business sector : Manufacturing industry Annual Sales : 200 MILLION JPY
Scope of Business : ・ Proposals, manufacturing, and construction of FA (factory automation and power saving equipment) ・ Development, manufacturing, and sales of experimental and demonstration equipment for universities and research institutions. ・ Joint research and development together with universities and research institutions ・ Development and sales of welfare machines ・ Planning, development, and sales of the customized machines
Position/Title : Overseas Sales Dept. / General Manager Name : Machiko Terada E-mail : [email protected] Tel : +81-46-206-5611
Manufacturing with the harmony of people and machines!
DOUBLE Research & Development CO., LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Category A3 (three fingers and one engine)
Category A3 (three fingers and one engine)
Category A5 (five fingers and eight engines )
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
28
Corporate ProfileIn 1941 The company was established by Sutekichi Nagai
at Hiratsuka (currently Shinagawa), Ebara, Tokyo.In 1942 It became the designated factory of Nakajima
Aircraft and started the machining of parts for aircrafts.
In 1960 It was mostly equipped with general-purpose lathe, milling machine, multiple drilling machine, etc., and undertook orders of parts for hydraulic pressure and gear cutting.
In 1982 It transferred the factory to Sagamihara-City, Kanagawa.
In 1987 It set up a large machine center and NCN.
Introduction of promoted products and technologies
・Horizontal MC630×630×6APC(BT50) 4 units (MAZAK) ・horizontal MC 400×400×2APC/3APC(BT40) 2 units (Mori Seiki)・Vertical MC W500×H560×L1,050(BT40/50) Others 5units
(Mori Seiki /MAZAK others) ・5-axes and all-complex processing machine Φ500×600L(BT40) 1 unit (MAZAK)・horizontal NC Lathe Φ890×1000L others 7 units (Mori Seiki /Ikegai) ・Vertical NC lathe Φ800×H8401unit
(OKUMA HOWA)・3D measuring machine BH7061unit (Mitutoyo) ・Vertical broaching machine (20t) 1 unit (NACHI)・Travelling crane (2.8t) 1 unit ・remote operation crane
(60kg~1t) 9 units ・CAD/CAM・other general-purpose facilities
Strength and Characteristics of our products
Items available for order:Materials procurement, heat treating, processing (NCL・MC・5-axes processing, Broaching), etc., high frequency , surface finishing(painting, coating, polishing)Examples of processed products:Photo ① housing by use of casting sand reclamation
apparatus, Feature:processed products of welded structure(single item machining⇒welding⇒f inish machining)
Photo② rotary drum by use of casting sand reclamation apparatus, Feature:processed products of welded structure(single item machining⇒welding⇒f inish machining)
Photo③ air suspension parts for large-scale vehicles ; Seat; Air、 Feature:precise machining of large articles
Corporate Profile
Company Name : EBARA KOGYO CO.,LTD.
Location : 3825 Tana Chuuou-ku, Sagamihara-city, Kanagawa 252-0244
Representative : Kiyoaki Nagai
TEL : +81-42-761-1201 FAX : +81-42-761-1208 URL : http://ebara-kk.jimdo.com/
Founded in : Apr 1941 Capital : 30 MILLION JPY Employees : 30
Contact Person
Business sector : Manufacture of parts for transport aircraft Annual Sales : 600 MILLION JPY
Received credentials or certification : ISO 9001, ISO 14001
Scope of Business : Manufacture of clutch housing, ring gear of trucks and buses over 8 tons and parts of other motor vehicles.
Position/Title : Director Name : Hidefumi Yagi E-mail : [email protected] Tel : +81-42-761-1201
EBARA KOGYO CO.,LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Photo① Housing Photo② Rotary drum Photo③ Parts of air suspension
We have been earnestly working on the processing of machines of diverse products in small quantities through the DNA of parts processing of engines from the Zero fighter plane.
Autom
obile Parts and
Accessories M
anufacturing
29
Corporate ProfileWith 40-years of history, we are an integrated engineering company with factory and facilities. We have used our experiences and ideas of all kinds to resolve the difficulties in manufacturing factories, and have worked hard to solve our clients’ issues.Currently our development department is developing products to solve the problems of our clients. We mainly sell “ecoeit” products.Relying on young vitality and 40-years of experience, Eishin Techno conducts our duties very hard, solves the clients’ problems, and contributes to the society based on our daily research, development, improvement, and introducing our production like to the clients. In a strict age like today, we want to keep contributing a place where the young can work actively.
Introduction of promoted products and technologies
We use the patent technology “two section liquid level following recycle” to produce and sell “recycling device of floating matters and floating oil”.
With stable absorption never seen before and the simple structure which improves the maintaining performance, it reduces the cleaning, repairing, and malfunction of processing which are not directly related to the main work for the clients, and also improves the working efficiency and production efficiency of the machine. The structure which almost needs no maintenance comes from our experience of solving numerous problems in factories. We will work hard to produce products which clients want to keep using.
Strength and Characteristics of our products
Our environmental product “ecoeit”Feature ①: Used by the auto manufacturers in Japan with
high reliability.Feature ②: It is a compact mobile product. One can handle
many cooling water tanks. Feature ③: Unique patent technology brings stable and
h i g h a b s o r p t i o n w i t h e s p e c i a l l y h i g h practicability on maintenance.
Feature ④: It is air driven without electricity, so it can be used in anywhere in the world.
Corporate Profile
Company Name : EISHIN TECHNO CO.,LTD.
Location : 1630-2 Shimokuzawa, Midori-ku, Sagamihara-city, Kanagawa 252-0134
Representative : ISO9001
TEL : +81-42-773-6238 FAX : +81-42-773-6548 URL : http://www.eishin.Info
Founded in : May 1945 Capital : 30 MILLION JPY Employees : 20
Contact Person
Business sector : Development, manufacturing, and sales of environment-related products 「ecoeit」 made by our company
Annual Sales : 300 MILLION JPY Received credentials or certification : ISO9001
Scope of Business : Manufacturing and sales of the environmental product [ecoeit].
Position/Title : Environmental Product Department deputy Manager Name : Daisuke Kikuya E-mail : ecoeit@eishin.info Tel : +81-42-773-6238
WD-A floating oil recycling device
You can rely on ecoeit for the purification of cooling water tank of the lathes and cleanout fluid container of the cleaning machine!
EISHIN TECHNO CO.,LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
ES-A waste water and residue recycling device
Scene of equipment use
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
30
Corporate ProfileSince establishment, we have been pushing forward the development and commercialization of micro encoders ( rotat ion angle and posi t ion sensor) , encoders of decomposability, and small resolvers of high environment endurance (rotation angle and position sensor) with our unique technology and experience of many years. With our unique technology as the core, we want to be a small yet important company.
Introduction of promoted products and technologies
[Rotary encoder]We realized a reliable rotary encoder of small shape and high decomposability with the photoelectric sensor solely developed by our company. We can also develop and manufacture customized encoders with the photoelectric sensor according to our clients’ specifications. We are continuously developing new photoelectric sensor of high precision and high reliability. [Modulating wave resolver]
With our unique principles, our company is developing and manufacturing the small and thin modulating wave resolver with high decomposability. Compared with the previous resolver, the size and thickness of this modulating wave resolver is less than 1/3, weighs less than 1/2, but has a high decomposability equal to 4-10 times of the previous.
Strength and Characteristics of our products
[Rotary encoder] • We realized a high decomposability of 3600P/R with φ
25mm.・ We are also developing a higher decomposability of
5000P/R with φ25mm.[Modulating wave resolver]• We realized the 290 thousand high decomposability with
an external form of φ18mm.• The thickness of the sensor can be less than 2mm. • It is easy to cope with extreme environments such high
and low temperature, high vacuum, water, dust, and aerospace.
Corporate Profile
Company Name : EXTCOM INC.
Location : 1-6-12 Yamato-higashi, Yamato-city, Kanagawa 242-0017
Representative : Tadao Chino
TEL : +81-46-200-2011 FAX : +81-46-261-2117 URL : http://www.extcom.co.jp/
Founded in : Sep 2005 Capital : 10 MILLIN JPY Employees : 4
Contact Person
Business sector : Electron parts Annual Sales : 40 MILLION JPY
Received credentials or certification : None
Scope of Business : Design, manufacture, and sales of encoders and resolvers
Position/Title : Chief Executive Officer Name : Tadao Chino E-mail : Info@extcom.co.jp Tel : +81-46-200-2011
Sales of rotary encoder
The company of exciting sensor technology
EXTCOM INC.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Designing and manufacturing of resolvers
Autom
obile Parts and
Accessories M
anufacturing
31
Corporate ProfileSince establishment in 1947, we have been committed to research and development of manufacturing technology and related products of the bellows and temperature controllers. For the technical innovation of application of temperature control, pressure control, and fluid control technology, our products are broadly used on auto parts, residential equipment, aerospace machines, household appliances, heavy machines, and metrical instruments.
Introduction of promoted products and technologies
Currently, the technology written in our profile is dispatched to Japan and the whole world. We can also provide products to support the protection the environment, prevent global warming, and realize clean engines to create a safe, clean and comfortable living space. We challenge to create products that can contribute to different fields with new ideas. Taking “the corporate’s social responsibilities (CRS)” as our guide to action, we make contributions to the world based on “safety and quality” and “technology and trust” during production.
Strength and Characteristics of our products
Thermostat: [auto parts] inside the built-in devices of the autos, ensures performance durabil ity and controls appropriate temperature. 【Photo1】Regulates the temperature valve according to the requirements of the cooling system, broadly used in the cooling water system. Constant flow valve: [residential equipment] A valve controlling the outlet flow according to change of the water pressure.【Photo 2】Without electrical power, save space, cost and water consumption.Bellows: [aerospace machines and other machines] Metal thin coiler pipe, with good flexibility and salability. 【Photo 3】Broadly used in sealing material for connectors of the tubing and valves, pressure sensor, and temperature sensors.※Main clients of our products: Temperature controller:「TOYOTA MOTOR CORPORATION」「HONDA MOTOR CO., LTD」Constant flow valve:「TOTO LTD.」Bellows : 「MITSUBISHI HEAVY INDUSTRIES,LTD.」
Corporate Profile
Company Name : FUJI BELLOWS CO.,LTD
Location : 1-6-8 Fukami-higashi Yamato-city, Kanagawa 242-0012
Representative : Hideo Ando
TEL : +81-46-261-2405 FAX : +81-46-261-5045 URL : http://www.fuji-seiko.co.jp
Founded in : May 1947 Capital : 100 MILLION JPY Employees : 350
Contact Person
Business sector : Manufacturing of auto parts Annual Sales : 7,100 MILLION JPY
Received credentials or certification : ISO14001, ISO9001:2008, ISO/TS16949:2009
Scope of Business : Design, manufacturing and sales of the parts for autos, aerospace machines, residential machines, bellows and bellows applied products.
Position/Title : General Office Department General Manager Name : Satoshi Chikaoka E-mail : eigyo01@fuji-seiko.co.jp Tel : +81-46-261-8260
Temperature controller Constant flow valve Bellows
FUJI BELLOWS CO.,LTD
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
32
Corporate ProfileApril 1960 Accepted the order of processig air valves for the
special engines from Fuj i valves (current ly Fujiozekku), and established our company at Hinode town.
May 1989 Expanded to Okawa Town Industrial Zone (current location) with three factories.
April 1990 The equipment quality assurance department was separated individually and Suntech Co., Ltd was established.
May 2001 Began to accept orders of ball screws and LM guide rails.
March 2012 Wajima factory of Suntech Co., Ltd was completed and began operation.
Introduction of promoted products and technologies
Our technologies for autos, ships, parts of the worming machines, and IT parts have accumulated since our pioneering in the beginning can let us do the designing, development, processing, and assembling in one stop. We are best at processing the parts of cutting resistant materials and precision parts based on cutting, shearing, grinding and trepanning technologies on lathes. In other words, “there are no metals we cannot process.”
Materials: Heat resistant steel, Ni alloy, titanium, aluminum, SUS, Inconel, tungsten, copper, iron, resin, and other metals. Processing dimensions: Cutting φ1~φ50~300Lmilling 250×300×300, grinding φ1~φ50~300L between cores 600L.Features: Manufacturing all clamps, processing all cutting resistant materials, trial manufacturing, and development from one object to a small batch and big batch production.
Strength and Characteristics of our products
Photo ①: air valve of the engine Using the technologies accumulated since
establishment, we work together with universities to process the parts for hydrogen auto engines.
Photo ②: Processing and assembling mechanical elements
We p rocess and assemb le t he pa r t s f o r semiconductor fabrication equipment, medical equipment, entertainment equipment, and other purposes.
Photo ③: E x h i b i t i o n p r o d u c t s f o r t h e r o b o t competition
We have had several teams to participate in the Kawasaki Robot Competition every year and cultivated excellent performances.
Corporate Profile
Company Name : Hinode Seisakusyo CO., Ltd
Location : 11-13 Ookawa-cho, Kawasaki-ku, Kawasaki-city, Kanagawa 210-0858
Representative : Kazushi Iwa
TEL : +81-44-322-5521 FAX : +81-44-322-5574 URL : http://www. hinode-ss.jp/
Founded in : Sep 1960 Capital : 48 MILLION JPY Employees : 45
Contact Person
Business sector : Metal processing Annual Sales : 300 MILLION JPY
Received credentials or certification : ISO9001
Scope of Business : Development, manufacturing and sales of working mechanical parts (ball screws), single parts, and parts of cutting resistant materials
Position/Title : Senior Management Director Name : Takeshi Iwa E-mail : info@hinode-ss.jp Tel : +81-44-322-5521
Air valve of the engineer Processing and assembling the mechanical elements
Exhibition products for the robot competition
We are a company devoted to high quality manufacturing of parts with cutting resistant materials and high precision mechanical parts!
Hinode Seisakusyo CO., Ltd
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
33
Corporate ProfileWe began as a special manufacturer for secondary processing of steels in 1939. Since establishment, we have been pursuing the attitude of “clients first”, and trying utmost to satisfy our clients on “quality”, “price” and “delivery period”. Therefore, we have pursued complete rationalization by bringing in new equipment and improving the staff’s technical training. All staffs of our company will work hard without compromising to satisfy our clients’ requirements and strive to become better and better.
Introduction of promoted products and technologies
We process steel materials of steel manufacturers to be suitable for mechanical processing and cold heading products. This is called secondary steel processing, our products are an important factor for influencing the quality, accuracy, and strength of the steel in all kinds of industrial fields, especially the auto parts field which needs thorough quality management that is directly linked to the accuracy of the par ts . We coopera te w i th the i ron and s tee l
manufacturers for products that satisfy our clients’ requirements from materials to manufacturing procedures.
Strength and Characteristics of our products
We can manufacture extension products from special steels and steels after heat treatment to hard-processed mater ia ls and h igh prec is ion mater ia ls , and can manufacture the cold heading wires by using the annealing furnace with high reproducibility and equipment ensuring no flaws on the full length. Also, we can make the products with no surface flaws and less surface stress through cutting and machining the surface of the materials, and can provide the products with cross sections and accuracy according to the clients’ purposes. These are our company’s features and strengths.
Corporate Profile
Company Name : IKEUCHI SEIKO Co.,Ltd
Location : 1-19-1 Kurihama, Yokosuka-city, Kanagawa 239-0831
Representative : Keiichiro Yamaoka
TEL : +81-46-835-1234 FAX : +81-46-835-1238 URL : http://www.iskcorp.co.jp/
Founded in : Sep 1939 Capital : 100 MILLION JPY Employees : 130
Contact Person
Business sector : Manufacturing and sales of cold heading steel wires and polishing steel bards Annual Sales : 11,000 MILLION JPY
Received credentials or certification : ISO9001
Scope of Business : Cold drawing, lathe cutting, and cutting the steel bar
Position/Title : DIRECTOR Name : Tsunehiko Maehara E-mail : soumu@iskcorp.co.jp Tel : +81-46-835-1234
Cutting product CHQ product Peeling product Drawing product
IKEUCHI SEIKO Co.,Ltd
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
34
Corporate Profile1990 Founded through joint capital investment with IBM
Japan Ltd.1993 Established P.IMES in the Philippines as the main
factory for plastic parts, PCB mounting and OEM products fabrication.
1995 Established SSC in the Philippines for production of the precise press parts.
1995 Established a manufacturing subsidiary in the Thailand, PTC for production of machined parts and sheet-metal parts.
2005 Established HK. IMES(Hong Kong) for the marketing in China
2007 Established IMES G in the Philippines for world wide dispatch of staff.
2013 Received pro-active programs achievement award from Department of Trade and Industry (DTI) of Philippines
Introduction of promoted products and technologies
Value created by IMES・Low-cost product ion, provis ion of infrastructure(Philippines, Thailand)Overseas production, part procurement, assembly and test, export and import management, acceptance of batch order, various certifications・Localization of production equipments (Japan, Philippines)
Automated production and test equipment, start-to-finish production process line from designing to manufacturing.・Provision of the talented (staff ing service through
Philippines)International staffing, dispatch of special technicians
Strength and Characteristics of our products
Our company has established the local factories and manufactur ing equipments in the Southeast Asia, especially with the Philippines and Thailand as the main production bases, and it has become a company offering a variety of production activities by taking full advantage of the local workforce. We have been undertaking the production activities in a wide scope, ranging from plastic injection molding, mold building ,sheet-metal machining, PCB assembling, medical instrument manufacturing to precision optical instruments assembling, etc. Moreover, regarding the machines used for production equipments, we are equipped with the technical power to accept the order throughout the process from the designing to manufacturing. In respect of international logistics sector, we are capable to carry out the business smoothly based on our export and import experiences over the years. Besides, our subsidiary in Philippines has carried out the business activities in the special economic zone for more than 20 years and received high recognition for such performances from PEZA (Philippines Economic Zone Authority).
Philippines factory Assembly operation in clean room Automotive-related parts manufacturing(example)
Based in Asia, IMES Group undertakes the mass production of various products as well as the designing and on-site manufacture of production equipments.
International Manufacturing & Engineering Services Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileCompany Name : International Manufacturing & Engineering Services Co., Ltd.
Location : 3 Kirihara-cho, Fujisawa-city, Kanagawa 252-0811
Representative : Keiichi Tsukamoto
TEL : +81-466-45-5550 FAX : +81-466-45-0045 URL : http://www.imes.co.jp/
Founded in : Dec 1990 Capital : 435.3MILLION JPY Employees : 88(domestic)
Contact Person
Business sector : Manufacture of electrical machinery and apparatus Annual Sales : 5,000 MILLION JPY
Received credentials or certification : ISO 9001, ISO 14001
Scope of Business : 1.Manufacture of production equipment and test equipment 2.Entrusted manufacture 3.Staffing service
Position/Title : Sales Director Name : K.Takatsuka E-mail : [email protected] Tel : +81-466-45-5779
Autom
obile Parts and
Accessories M
anufacturing
35
Corporate ProfileWe developed the new electr ic corona ionic wind technology receiving patents in Japan, USA, China, and Korea; we are under commercia l negot iat ion with corporations in these countries. At present, we are requesting for inspection in EU members, Thailand, Vietnam, Indonesia and India, and have applied for patents for our advanced new technology.
Introduction of promoted products and technologies
New technology which generates electric corona on the electrode rode with high voltage charge and optimizes the shape of the electrode rode to generate a large amount of ionic wind (low concentration ionic wind with negative charge). The ionic wind with degerming and deodorizing effect can be used in hospitals, caring facilities, facilities for pets as well as others. It can also be used in industrial machines such as household electrical appliances as a small component.
Strength and Characteristics of our products
Technology of generating a large amount of electric corona ionic wind!Before, marginal discharge on the electrode generated ring-shaped ionic wind, but this new technology uses layered rings to generate a large amount of negative charge low concentration ozone.
Corporate Profile
Company Name : KATANO KOGYO CO.,LTD
Location : 15-19 Honmokusannotani Naka-ku, Yokohama-city, Kanagawa 231-0824
Representative : Akio Katano
TEL : +81-045-628-1016 FAX : +81-045-621-7515 URL : http://www.katano.co.jp
Founded in : Sep 1990 Capital : 20 MILLION JPY Employees : 30
Contact Person
Business sector : Development, manufacturing, and sales of the sanitization deodorization machine Annual Sales : 850 MILLION JPY
Scope of Business : Container maintenance, packaging of exports, manufacturing and sales of sanitization deodorization machines.
Position/Title : President Name : Akio Katano E-mail : [email protected] Tel : +81-090-3144-3121
Organic sanitizing with our ionic wind
KATANO KOGYO CO.,LTD
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Air Success Solar Air Success ProAir Success Pro
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
36
Corporate ProfileWe are an enterprise specializing in producing the so-called “springs” which can be broadly used for autos, electrical machines and the precision machines. Our objective is producing products which clients will be pleased with, and we handle not only smal l batch productions of al l kinds but also the technology of manufacturing high quality springs quickly, accurately, and with low cost. We are aiming for providing the “living springs” which supports people’s living with sensitivity and foreseeability of interpreting the current age and flexible and rich ideas to satisfying our clients. We have two production bases in Japan and one in Malaysia. In USA and China where our company has technical cooperation, we can also provide our clients the high quality springs equal to those manufactured in Japan with our trained technology.
Introduction of promoted products and technologies
Our company can undertake a one-off trial product to millions of batch-produced products. We begin operation from the designing of a consistent high quality spring, and
they are used especially in autos and other electrical devices. With wire diameter of 0.1mm to 5.0mm, compression springs, extension springs, torsion springs, and other standard shape high precision “springs” is our centered task. We can also design and manufacture springs for the auto seats, the extension springs used for the windshield wipers, and other high torque/high load and high press special springs.
Strength and Characteristics of our products
1. Precision compression spring Designing of high precision compression spring, and
p ro d u c t i o n p re p a re d w i t h a 1 0 0 % l o a d t e s t manufacturing process
2. Extension spring for windshield wiper, [Photo ①] [Photo ②]
Designing of the high load and high stress extension springs, and manufacture high speed and high precision production.
3. Spring [Photo ③] Designing of high torque and press springs, predicting
the life span, and manufacturing.
Corporate Profile
Company Name : KEIHIN HATSUJYO Co., Ltd.
Location : 5-2931 Urago-cho, Yokosuka-city, Kanagawa 237-0062
Representative : Shuichi Katahira
TEL : +81-46-865-8391 FAX : +81-46-866-4136 URL : http://www.keihin-hatsujo.jp/
Founded in : Nov 1950 Capital : 50 MILLION JPY Employees : 146
Contact Person
Business sector : Design and manufacturing of precision springs Annual Sales : 2,300 MILLION JPY
Received credentials or certification : ISO9001, ISO14001
Scope of Business : Design and manufacturing of the precision springs for autos and electrical machines, design and manufacturing of shape memory alloys.
Position/Title : Overseas Sales dept. General Manager Name : Yoshio Fukushima E-mail : [email protected] Tel : +81-46-865-8391
“Living Spring” Supports the people’s livings, and challenges for a gentle andeasy-to-use “living spring”
KEIHIN HATSUJYO Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
High load: compression spring and extension spring
Production equipment for the springs of the windshield wiper
High torque: spring
Autom
obile Parts and
Accessories M
anufacturing
37
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileSince establishment in 2000, we have been pursuing high precision cutting technology. The policy of KMS is not only cutting but also working together for the solutions of urgent demands from our clients. One of the strengths of our company is the strong network of small factories in Japan. You can consult all processing technologies in our consulting service, and we have expert teams serving for you. We can work out the products that the manufacturers wish through cooperation with small factories.
Introduction of promoted products and technologies
・ We are most specialized in the cutting and processing of which require highly precise and special shapes with materials such as aluminum, SU, and other metals as well as engineering plastic and glass.
・ We handle not only parts for autos but also for internal parts for aircrafts. We also do cutting with high precision from aluminum blocks so that it can be used safely even in environments with big pressure change.
・ In the aerospace field, we also process and manufacture
the installation rack for mounting the carbon fiber solar cell panels.
・ We recently brought in the 3D printer. With this, it will remove the limit of machining technology so we can make products according to the clients’ imaginations.
Strength and Characteristics of our products
Photo ①: processing the intake manifold for racing autos
Example: 3D data sent to the CNC which cut the material into sample AL5052.
Photo ②: Machining the parts of experimental facilities for medical treatment.
Example: 3D data sent to the CNC which cut the material into acrylic sample.
Photo ③: 3D printer This is the inside of the printer which is printing
the green inclined cup-shaped object. It can print objects up to the size of a watermelon.
Corporate Profile
Company Name : KMS Co., LTD
Location : 3-1-2 Ogura, Saiwai-ku, Kawasaki-city, Kanagawa 212-0054
Representative : Takashi Kamii
TEL : +81-44-588-0070 FAX : +81-44-588-0271 URL : http://www.facebook.com/Custom.Parts.KMS
Founded in : Sep 2000 Capital : 3 MILLION JPY Employees : 2
Contact Person
Business sector : Precise cutting and processing industry Annual Sales : 35 MILLION JPY
Scope of Business : Manufacture of trial-production parts, robot parts, customized parts of vehicles and racing autos,
parts of aircrafts, and parts of medical equipment
Position/Title : President Name : Takashi Kamii E-mail : kms@agata.plala.or.jp Tel : +81-44-588-0070
Transform the imaginations in the world into shape with cutting and processing.
KMS Co., LTD
Parts of experimental facilities for medical treatmentIntake manifold 3D printer
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
38
Corporate ProfileThe Koizumi Tool corporations has accumulated the top class micron precision machining technology for 40 years, and by bringing in the newest equipment, we have been manufacturing tools mainly for the auto industry. In the past years, we have been focusing on individuality and pursuing more individualized technology in the global society. We have always considered our products in our clients’ shoes and developed and manufactured new products. We as an expert enterprise of special cutting tools believe that providing better products is our duty.
Introduction of promoted products and technologies
We do sales proposals centering on the cutting and sharpening with the diamond sintering body, CBN sintering body and superhard materials. Cutting tools… vertical milling cutter, reamer, milling cutter, drill, turning tool, and indexable insert. Anti-abrasion tools:…plugs, contact shoe, gauge head, etc.
Strength and Characteristics of our products
We mainly do designing, manufacturing, and regrinding of special tools for the production lines of engines, brakes, and compressors of autos. We are also considering the cost reduction and solutions of faults after products are machined according to the technical proposals. Also, we make full efforts to protect the tools of the production line we received from our clients.
Corporate Profile
Company Name : Koizumi Tool Co.,Ltd.
Location : 27-2 Higashiyamada-cho, Tuzuki-ku, Yokohama-city, Kanagawa 224-0024
Representative : Kazuhiro Koizumi
TEL : +81-45-592-2207 FAX : +81-45-592-2203 URL : http://www.koizumitool.co.jp/
Founded in : Dec 1985 Capital : 40MILLION JPY Employees : 48
Contact Person
Business sector : Manufacturing of mechanical tools Annual Sales : 650MILLION JPY
Received credentials or certification : ISO9001
Scope of Business : Manufacturing and regrinding of superhard alloy, diamond tools, CNB tools, and cutting & shearing tools
Position/Title : Overseas sales department Name : Koizumi Kazuhiro E-mail : [email protected] Tel : +81-45-592-2207
Diamond cutting tool Latest NC machine
Using micro unit precise processing technology and bringing in the newest equipment, we mainly manufacture tools for the auto industry.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Koizumi Tool Co.,Ltd.
Our company is conducting cutting with diamond head end mill.
Autom
obile Parts and
Accessories M
anufacturing
39
Scope of Business : Processing the parts of precise metal patterns, processing the parts of precise template
patterns and manufacturing parts of the connector automat.
Corporate Profile
1981 The current president who is developing and researching
patterns for the semiconductor in APIC YAMADA
began the business in Tama-ku, Kawadaki-City.
1984 Formed a joint-stock company to Lead-giken.,LTD as a
semiconductor ( IC) progressive pattern parts
company.
1985 Established the headquarter factory in 329-2 Noboriton,
Tama-ku, Kawadaki-City.
1998 Established the second factory in Nakanoshima
Tama-ku.
Introduction of promoted products and technologies
・ We mainly process the mold patterns for the semiconductor
and the connector, press metal patterns, the automat, and
jigs with submicron precision. We can perform φ0.05
wire-electrode cutting, micro EDM grind processing, outline
grind processing, grind processing of jigs, precise grind
processing and precise 3D cutting.
・ In 2012 Vietnam Livico company and LiviKawasaki combined
and began the production of parts for bikes.
・ In 2013, it established Hybrico company and is planning to
manufacture the electrical bikes with the local LiviKawasaki.
・ Our other company, COPRONA corporation (headquarter in
Kawasaki) is supporting to advance the business
development to Vietnam.
Strength and Characteristics of our products
Photo ①: wire-electrode cutting is used to produce the
superhard perforating machine. Several dozens
of needles processed with submicron precision
are in one row.
Photo ②: Uses microscope for inspection. Inspection is done
with 100 times precision. Some of the employees
in our company are female.
Photo ③: Inside the joint venture Vietnam Livico factory.
Corporate Profile
Company Name : Lead-giken.,LTD
Location : 329-2 Noborito, Tama-ku, Kawasaki-city, Kanagawa 214-0014
Representative : Minoru Ogawa
TEL : +81-44-932-2952 FAX : +81-44-932-7580 URL : http://www.lead-giken.co.jp
Founded in : Jun 1984 Capital : 25 MILLION JPY Employees : 19
Contact Person
Business sector : Metal pattern manufacturing Annual Sales : 145 MILLION JPY
Position/Title : Process Control Manager Name : Keiki Tanaka E-mail : [email protected] Tel : +81-44-932-2952
Photo ①Superhard perforating machine.
Photo ②Inspection with microscope by 100 times
Photo ③Production workshop of Livico company
Lead-giken.,LTD
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
With pursuit of precise machining technology and bearing in mind to keep challenging for new products, our company leads the Japanese manufacturing industry.
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
40
Corporate Profile
Company Name : Matsumura-Kohki Co., Ltd.
Location : 2-2-24 Yoshioka-higashi, Ayase-city, Kanagawa 252-1125
Representative : Akira Matsumura
TEL : +81-467-50-0561 FAX : +81-467-50-0562 URL : http://www.matumura-kohki.co.jp
Founded in : Mar 1965 Capital : 70 MILLION JPY Employees : 30
Scope of Business : Manufacturing and sales of the snap ring (spiral locking ring), wave compression spring (rolling
wave spring), sealing ring and composite spring (wave compression spring with snap ring)
Manufacturing and sales of parts related to the above
Contact Person
Business sector : Metal machining Annual Sales : 575 MILLION JPY
Received credentials or certification : ISO 9001:2008, Eco StageⅡ(ISO 14001)
Position/Title : Sales Department/ General Manager Name : Hideo Iseki E-mail : [email protected]
Tel : +81-467-50-0561
Spiral locking ring Rolling wave spring Appearance of the factory
Quality First made in japan by matumura
Matsumura-Kohki Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileStarting with the making of spiral locking rings (snap rings), our company originally expanded business operation centering on the auto industry. Later, with the reeling technology we have been fostering for many years, we began to produce the rolling wave springs (spiral wave springs). At present, the products of our company are used in many fields. Not being limited to JIS specifications, we will support our clients’ designs.
Introduction of promoted products and technologies
[Spiral locking ring (snap ring)] We can manufacture with matching shafts and bore diameters requested by our client. [Sealing ring] Used for aircrafts, ship engineering machines, industrial machines, and auto turbocharger. The material
can be heat resistant steel SUS631J1 and SUH660, Inconel, Waspaloy alloy and so on. The Sealability under high temperature has received high assessment.[Roll ing wave spring (wave compression spring)] Compared with the coil spring, the rolling wave spring can restrain the reduced free length to contribute greatly to save space in designing. [Composite spring] A product combining the spiral locking ring and the rolling wave spring. It reduces the number of the parts and can simplify the design to make a lower cost possible.
Strength and Characteristics of our products
All products are formed by reeling circular angle flat material, so they have no burrs, fall ing and fins like punched products. Besides the general carbon steel, there are stronger types of stainless steels as well.
Autom
obile Parts and
Accessories M
anufacturing
41
Corporate ProfileIn May 1939, Mr Kentaro Mizuki established Mizuki Rivet
Manufacturing Co., Ltd. in Hiroo Town, Azabu, Minato-ku, Tokyo, and started the production of threaded attachment.
In Sep 1963, it built the 1st self-developed machine of “high-speed cold header” .
In Nov 1965, it built the 1st self-developed machine of “thread roll ing machine with automatic washer”.
In Apr 1986, it established the Yamanashi factory in Tsuru-city, Yamanashi Prefecture and put it into production. Domestic bases (Head factory, Yamanashi factory), Overseas bases (Thailand, Laos, Hong Kong)
Introduction of promoted products and technologies
With stable performances over 70 years in business, we always carry on with the challenge for higher level products and technologies, and unceasingly strive to meet the high demands concerning the attachment parts from our customers.
Our whole staff will continue to make an effort to carry out business completely from our customer’s point of view and provide the best products with the highest speed, and will continue to develop innovative technologies and meet new chal lenges with the utmost effort to serve various customers.May 2011 Rewarded as Excellent Supplier by Nidec Copal Electronics Corp. Jun 2011 Rewarded the Excellent Quality Award by Stanley Electric Co., Ltd
Strength and Characteristics of our products
By utilizing self-developed technologies of rolling machines and adding our unique scheme to the forging machine, we carry out the manufacture with high aspirations. Always challenging for zero defects, we have an unique image inspection device for sizes that are visually difficult to see and carry out strict inspection for all products.By having the function as a trading company as well, we can deliver to the manufacturer directly. In this way, we can exchange detai led information and make accurate responses immediately. Moreover, we are responding actively for exporting and overseas expansion.
Corporate Profile
Company Name : MIZUKI CO.,LTD.
Location : 2758-3 Hayakawa Ayase-city, Kanagawa 252-1123
Representative : Taichi Mizuki
TEL : +81-467-70-1710 FAX : +81-467-70-1770 URL : http://www.mizuki-corp.co.jp/Founded in : Nov 1984 Capital : 27.5 MILLION JPY Employees : 44(domestic)
Contact Person
Business sector : Attachment parts Manufacturing Annual Sales : 1,000 MILLION JPY
Received credentials or certification : ISO9001, ISO14001
Scope of Business : Precise screw (M0.6~M10), precise polished shaft, lead screw, worm gear ,special cutting work and others
Position/Title : President Name : Taichi Mizuki E-mail : master@mizuki-corp.co.jp Tel : +81-467-70-1710
Product sample (General) Header, rolling components (large-diameter) Precise polished shaft, Teflon coated shaft
We are confident in manufacturing precise attachment parts (screw, shaft, etc.). We will meet the customer’s needs with reliable performance and challenge for technologies.
MIZUKI CO.,LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
42
Corporate Profile1971 Began the enterpr ise in Hyoshi Kouhoku-ku Yokohama with mechanical sculpture.2006 Moved the factory to Komaoka, Tsurumi of Yokohama. 2013 Set the Kansai shop in Kyoto Research Park.
Introduction of promoted products and technologies
NI IGATA is a manufacturer enterpr ise wh ich has researchers and technicians in enterprises and universities as our clients to provide a one-stop service including designing, manufacturing and installing equipment, tools, and clamps used for research, labs, and tests. ・ App l ica t ion o f cut t ing , g r ind ing and adhes ion
technologies can make our company produce plastic lens and visual experimental parts and equipment.
・ Trial production of silica gel into different shapes such as thin or complicated shapes, as well as the production of lens with high grade transparency silica gel.
・ Manufacture of parts confirming the liquid experiment and visualizing the moving parts.
・ We make a single part as well as a group of parts according to our clients’ specifications.
Strength and Characteristics of our products
On our homepage, there are items listed according to its method of construction, materials, and purpose. Please look for what will fit your needs.Photo ①: A cutting and grinding example by transparent resin lens. Photo ②: An example of visualized machined transparent resin part made by the Venturi pipe used for measuring liquid. Photo ③: An example of a customized container which can confirm the status of an experiment.Not only we can produce the transparent experimental parts with the function of confirming the auto engines and accessories, but also can provide visualization of the movements of the equipment and the flowing liquid.
Corporate Profile
Company Name : NIIGATA CORPORATION
Location : 2-12-5 Komaoka, Tsurumi-ku, Yokohama-city, Kanagawa 230-0071
Representative : Manabu Watanabe
TEL : +81-45-580-3181 FAX : +81-45-580-0688 URL : http://www.ni-gata.co.jp
Founded in : Apr 1979 Capital : 10 MILLION JPY Employees : 14
Contact Person
Business sector : Technical support for trial manufacturing Annual Sales : 182 MILLION JPY
Scope of Business : Development and technical support of the entire system, designing and manufacturing of experimental facilities and
clamps, industrial designing and planning, 3D modeling, resin and other integral metal processing, and integral sculpturing.
Position/Title : Sales Section Chief Name : Shinichi Morita E-mail : [email protected] Tel : +81-045-580-3181
Transparent resin lens Venturi pipe for measuring liquid flow Visualized customized experiment container
“Manufacture with the manufacturers”. Share the developers mind, and transform the imagination into reality.
NIIGATA CORPORATION
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
43
Corporate ProfileIn May 1906 Ohta Iron Factory established In July 1985 Newly established the cold forging factoryIn May 2000 Newly established the normal temperature
exclusive factory In March 2004 Received ISO14001 certification In April 2005 Received ISO/TS16949 certificationIn Dec 2010 Signed technical assistance agreements
w i t h C h i n a C h a n g z h o u F e n g l e a n d Shanghai Yunliang
In Dec 2012 Establ ished Ohta Yunl iang (Nanj ing) Forgings Co., Ltd with approval
Introduction of promoted products and technologies
With a production system of producing mainly hot forging, warm forging and cold forging auto parts as well as processing of post-processed materials, our company engages our best to specially study and develop the most suitable technique for the making of all products. Recently we began to make the forgings of SUS, SUJ and other special materials as well.
Strength and Characteristics of our products
Prepare the images with our products surrounding the car body based on the following photos. This is the product of our company.
Corporate Profile
Company Name : Ohta Iron Works Co., Ltd.
Location : 100 Ishida, Isehara-city, Kanagawa 259-1116
Representative : Tomohisa Ohta
TEL : +81-463-93-2111 FAX : +81-463-93-3955 URL : http://www.ohta-iron.co.jp
Founded in : Nov 1942 Capital : 100 MILLION JPY Employees : 185
Contact Person
Business sector : Manufacturing of auto parts Annual Sales : 5,000 MILLION JPY
Received credentials or certification : ISO 14001(2004), ISO/TS16949(2009)
Scope of Business : Hot forging, warm forging, cold forging, composite forging and machining
Position/Title : Sales Division Executive Officer Name : Hidetoshi Katou E-mail : [email protected]
Tel : +81-463-93-2111
Parts related to the chassis
Parts related to mission Parts related to the engineParts related to
the driving system
Widely And Endlessly, OHTA Advancing For The Future, With High Spirit.
Ohta Iron Works Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Parts related to the fuel injection pump
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
44
Corporate Profile
With excellent automatic lathe process technology and
cutting technology, our company specializes in production
of AT parts and oil pressure parts for autos as well as other
super prec ise par ts such as the d i rec t in jec t ion
high-pressure pump. Our company has been striving to be
trusted from our clients and trying utmost to provide high
quality products since our establishment. We have been
continuing to improve our technology to satisfy our clients.
With technical instructions and technical transformation
from Japan, our factory in Vietnam also provides good
products equal to those made in Japan.
Introduction of promoted products and technologies
We can process products of all dimensions from thin
diameters to wide diameters and of all materials such as
aluminum product, stainless steel and high-carbon steel.
What we do best is super precise processing of oil pressure
parts, and we can always fulfill our clients’ expectations for
our quality of cutting & machining to abrasive machining.
Strength and Characteristics of our products
The factory in Vietnam mainly uses bar turning CNC
automatic lathe to process aluminum valve core. The
engineers there are skillful and work day and night to make
high quality products.
Also, the Vietnam factory is located in Ho Chi Minh City
where we can provide products to clients nearby. This
factory mainly specializes in producing internal scrolls for
A/T and CVT control valve with consistently improving
processing procedures.
Corporate Profile
Company Name : OKAYA SEIKEN Co.,Ltd.
Location : 3-12 Torihama-cho Kanazawa-ku, Yokohama-city, Kanagawa 236-0002
Representative : Mitsuaki Komatsu
TEL : +81-45-772-1381 FAX : +81-45-772-1542 URL : http://www.okaya-seiken.co.jp
Founded in : Oct 1966 Capital : 41 MILLION JPY Employees : 95 (domestic) 550 (overseas)
Contact Person
Business sector : Metal processing Annual Sales : 1,500 MILLION JPY
Received credentials or certification : OKAYA SEIKEN:ISO9001(2008), OKAYA VIETNAM:ISO 9001, ISO 14001
Scope of Business : Manufaacturing and sales of auto parts
Position/Title : Sales section Director Name : Koichi Masuda E-mail : [email protected] Tel : +81-45-772-1381
We have been and will be trying our best to guarantee the value of our company’s existence.
OKAYA SEIKEN Co.,Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
①General appearance of the Vietnam plant
②Environment inside Vietnam plant ③ Processed scroll products ④ Cut parts for industrial equipment
Autom
obile Parts and
Accessories M
anufacturing
45
Corporate Profile1967 Masashi Watanabe began his enterpr ise by
designing, developing, and manufacturing racing cars.
1968 Began to produce aluminum alloy wheels “eight spokes”.
1972 The limited company was established. 1975 Was reconstructed to be a joint-stock company.1984 Established a new casting factory in Ibaraki to
manufacture wheels. 1996 The magnesium alloy wheel (RM8) of two-chip
structure 2 passed the VIS test for the first time in Japan.
2009 Began to sell NewRS8 2-chip 14 wheels.
Introduction of promoted products and technologies
We are the only manufacturer producing l ight al loy magnesium wheels in Japan. We have a history of half a century. In the past the wheels of our company were installed in skyline GTR, Fair Lady Z, and other old famous cars. Overseas, in USA, we joined Toyota in 2012 and were
in a team of electrocars that made the world record in Pikes Peak.
Strength and Characteristics of our products
・ We are an well-established maker in the field of wheel industry, and also receive on-line orders from all around the world.
・ Good driving performance and lightness contributes greatly to the improvement of fuel consumption, and they are starting to get brought into use for public cars.
Corporate Profile
Company Name : Racing Service Watanabe.,Ltd
Location : 1-2-21 Motomiya Tsurumi-ku, Yokohama-city, Kanagawa 230-0004
Representative : Toshiyuki Watanabe
TEL : +81- 45-573-5629 FAX : +81- 45-582-0201 URL : http://www.rs-watanabe.co.jp
Founded in : Jan 1969 Capital : 200 MILLION JPY Employees : 20
Contact Person
Business sector : Auto parts manufacturing Annual Sales : 200 MILLION JPY
Scope of Business : Manufacture and sales of auto parts (mainly aluminum and magnesium wheels)
Position/Title : Sales Dept Name : Masashi Watanabe E-mail : [email protected] Tel : +81-45-573-5629
Eight spoke D1 car with eight spoke wheel Formula car with eight spoke wheel
Lightness is a great advantage. The strongest, lightest, and most eco-friendlyvehicle wheel is RS Watanabe.
Racing Service Watanabe.,Ltd
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
46
Corporate ProfileEstablished in 1949, we have manufactured metal parts of driving system and engines for truck manufacturers and construction machine manufacturers. Sanwa Co.,Ltd has been active on the central stage of the manufacturing indus t ry. Based on the ce r t i f i ca t ions ISO14001 (environment) and ISO9001 (quality) received, the products delivered by our company in each field have been greatly trusted by our clients on quality, cost, and delivery period. Also, as a way to communicate with our neighbors, we organize visits from elementary schools to our factory once a year as our contribution to this area.
Introduction of promoted products and technologies
We have been manufacturing, processing, and assembling parts of engines for vehicles (trucks and buses), parts related to the running system, and single parts. Also, with our knowledge of manufacturing auto parts, we also manufacture parts related to the engine, fan guard, fuel tank, and splash guard of the bulldozers and forklifts, and also manufacture thin board and thick boards (t1~t22).
Using our pressing technology, we can even press parts that are difficult to process into indicated shapes, and by providing low costs and high precision, we have received high assessment from clients.
Strength and Characteristics of our products
Our strengths include press forming, welding, mechanical machining, laser cutting, surface treatment, assembling, and other production procedures. We have production procedures of many kinds from small batch production to big batch production and related production management systems. In order to satisfy our clients’ needs, we have an endurance lab for manufacturing trial products so that we can provide one-stop service from development to trial manufacturing and big batch production. The main parts made by our company includes high precision engine panels (photo ①), punched and machined, low cost brake-related parts (photo ②) with precision punch forming technology, and the brake pedal unit (photo ③)which processes from the trial manufacturing to the endurance test as well as processing of parts and assembling.
Corporate Profile
Company Name : SANWA CO.,LTD.
Location : 3-9-7 Inukura, Miyamae-ku, Kawasaki-city, Kanagawa 216-0011
Representative : ISO14001, ISO9001
TEL : +81-44--977-2111 FAX : +81-44-977-4669 URL : http://www.sanwa-gr.co.jp
Founded in : Jun 1948 Capital : 48 MILLION JPY Employees : 260
Contact Person
Business sector : Manufacturing of transportation machines and equipment Annual Sales : 4,825 MILLION JPY
Received credentials or certification : ISO14001, ISO9001
Scope of Business : Manufacturing and assembling of parts for autos, construction machines, and business machines etc.
Position/Title : General Manager General Affairs Dept Name : Kunihiko Tomizawa E-mail : soumu01@sanwa-gr.co.jp Tel : +81-44-977-2111
Engine panel Brake-related parts Brake pedal unit
A company trusted by clients, valued by our staff, and contributing to the society!
SANWA CO.,LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
47
Corporate ProfileWe provide board motor controller products and technical services including the sales of standard motor driver MOVO®, manufacture customized drivers, and provision of motor control technology.
Introduction of promoted products and technologies
MOVO® is the generic terms of the servo drivers provided by Servoland. MOVO® can be broadly correspond to open specifications and activities, self language, user program, industrial networking, all motor drivers, and all encoder standards.
Strength and Characteristics of our products
MOVO SVF: A model combining the basic performance and expansion:・ 16 bits digital current control (DQ vector)
・ 16 kHz servo circulation (DSP version)
・ Network model (CC-Link, EtherCAT)
MOVO SVN: A model of performance caring for precise control ・ Noise-free non-PWM high precision current linear
amplifier・ Can use single phase and three phase current amplifier
Corporate Profile
Company Name : Servoland corporation
Location : 4-3-14 Sagamihara, Chuuou-ku, Sagamihara-city, Kanagawa 252-0231
Representative : Hiroaki Hosogaya
TEL : +81-42-756-8500 FAX : +81-42-756-9236 URL : http://www.servoland.co.jp/
Founded in : Nov 1969 Capital : 100 MILLION JPY Employees : 10
Contact Person
Business sector : Development, manufacturing, and sales of electronic equipment Annual Sales : 200 MILLION JPY
Received credentials or certification : None
Scope of Business : Design, manufacture, and sales of servo drivers for high precision application.
Position/Title : President Name : Hiroaki Hosogaya E-mail : [email protected] Tel : +81-42-756-8500
Expert manufacturer for industrial motor controller
Servoland corporation
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
MOVO SVF CC-Link 262w MOVO Tools FRAMOVO SVF EtherCAT 8kw
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
48
Corporate ProfileThe objective of our company is to satisfy our clients in terms of cost, quality, delivery period and environment, and for this, we construct production management systems and manufacturing equipment for such systems as well as groping for the latest technical processing methods. The fierce change of business environments in this industry affects the diversity of products which clients seek for. Therefore, in order to quickly grasp the clients’ demands of high additional values and differentiation, we think in our clients’ shoes to provide the products and services that are needed.
Introduction of promoted products and technologies
We are best at front and back decorating processing with formed resin products to present the decoration technology of metal and crystal appearance. We provide a variety of parts including emblems for auto decoration parts and household appliances, as well as additional decorations.
Strength and Characteristics of our products
In terms of technology of metal dies, fine processing and grinding is our strong point. Also, the multi-face chamfer processing method of our company expands its power in the course of production of additional decoration products to lower the cost. In terms of technology of additional decoration, we try our best to satisfy our clients on color change and texture, and can provide the products closest to the design and the designer’s image.
Corporate Profile
Company Name : Shinko Nameplate Co.,Ltd.
Location : 1-11-9 Tana Shioda Chuuou-ku,- Sagamihara-city, Kanagawa 252-0245
Representative : Naoki Akiyama
TEL : +81-42-777-7271 FAX : +81-42-777-2110 URL : http://www.shinko-name.co.jp
Founded in : May 1963 Capital : 30 MILLION JPY Employees : 52
Contact Person
Business sector : Development, manufacturing, and sales of auto decoration parts and household appliances parts Annual Sales : 5,700 MILLION JPY
Received credentials or certification : ISO9001, ISO/TS16949 and ISO14001
Scope of Business : Development, manufacturing and sales of resins and other decorative parts.
Position/Title : Sales Dept. Manager Name : Shiro Ohata E-mail : Info@shinko-name.co.jp Tel : +81-42-777-7271
Front emblem (millimeter-wave radar support)
Instrument panel(instrument panel specification)
All kinds of smart keys(can resist interference of waves)
Using the original integrated production manufacturing system of Shinko, we make the impossible possible!
Shinko Nameplate Co.,Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
49
Corporate Profile1975 Established to design, manufacture and sell all
sensors for distortion measuring apparatus.1996 Became the agent of Japan Data Instruments Co.,
Ltd through signing contract.2001 Merged into Japan Data Instruments Co., Ltd and
signed to be the agent of Honeywell company.
Introduction of promoted products and technologies
・ All load cells・ A device to judge if the finished products are ok or not
through weighing the products one by one on the conveyor belt.
Strength and Characteristics of our products
・ Measures accurately even under vibration!・ Part of the press is replaced by the load cells, so it can
be installed later. ・ Use of the products below can improve the rate of
finished products.
Corporate Profile
Company Name : SHINKO SENSOR CO., LTD.
Location : 7642 Izumi-cho, Izumi-ku, Yokohama-city, Kanagawa 245-0016
Representative : Gumpei Wako
TEL : +81-45-803-4451 FAX : +81-45-803-4415 URL : http://www2.shinko-sensor.co.jp
Founded in : May 1975 Capital : 10MILLION JPY Employees : 5
Contact Person
Business sector : Manufacturing industry (design, manufacturing and sales of all sensors) Annual Sales : 70 MILLION JPY
Received credentials or certification : No. 5364546 patent traceability
Scope of Business : Design and manufacturing of all sensors based on strain gauge, official agent of Honeywell company,
calibration (with traceability)
Position/Title : Sales Name : Yuki Hirai E-mail : [email protected] Tel : +81-45-803-4451
When it comes to designing and manufacturing sensors based on strain gauges, leave it to us!
SHINKO SENSOR CO., LTD.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Weight comparison judging machineUsed to weigh if the weight of the finished product delivered by the conveyer belt is ok.
Load cellsPart of the press is replaced by the load cell, so it can be installed later.
Load cells Load cells of multilevel controls for CNC press
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
50
Corporate ProfileSince our establishment in 1957, our company has been using wood to produce auto interior design parts (mainly seats) aiming to be eco-friendly and cost saving. In the research and development field, we use wood as the main material, and we are developing a new material using the warm and soft properties of wood based on a basic study in universities. As for the material, with the study on recycling of woods, we use chips, blanking materials, and waste material. The fiberboards we use are made of more than 90% of waste wood, which made our products to be certif ied as the Ecological Mark Products by Japan Environment Association.
Introduction of promoted products and technologies
We produce all formalin-free products for the interior design parts for autos (common cars). In 1988,we gained the industr ial ownership of the hardboard (wooden fiberboard) formed 3D seat backboards which were used to manufacture the backboards of the front seats of al l autos. This hardboard became an
upcoming new material later on. Its manufacturing method is similar to paper. The 3D forming improves the strength and can be used to enlarge receiving containers and prevent small parts from going in.
Strength and Characteristics of our products
The products of our company focus on the following three points: [1. Ecology], [2. Excellent machinability] [3. Low cost]1⇒ The fiberboards can be easily disposed without public hazards. 2⇒ Can be processed to 3D shape catering for many demands. 3⇒Can make low costs. These are our features and strengths.
Corporate Profile
Company Name : SHINWA INDUSTRIAL WOOD WORKS CO.,LTD
Location : 2-11-16 Nishiterao Kanagawa-ku, Yokohama-city, Kanagawa 221-0001
Representative : Touko Kawashita
TEL : +81-45-421-2721 FAX : +81-45-431-4164 URL : http://www.shinwamokko.co.jp/
Founded in : Feb 1957 Capital : 10 MILLION JPY Employees : 14
Contact Person
Business sector : Manufacturing of auto interior design parts Annual Sales : 500 MILLION JPY
Received credentials or certification : ISO9001
Scope of Business : Manufacturing of auto seat parts and all interior design parts, processing and sales of wood and plywood products.
Position/Title : President Name : Touko Kawashita E-mail : carparts@shinwamokko.co.jp Tel : +81-45-421-2721
Rib installed on the surrounding dies to increase the strength
Hardboard Rawmaterial (cut products)
SHINWA INDUSTRIAL WOOD WORKS CO.,LTD
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Stamping and punching 3D forming
Leather adhesion assembly
Autom
obile Parts and
Accessories M
anufacturing
51
Corporate ProfileIn order to respond to our clients according to their situations, all staffs of our company work hard to pursue satisfaction.We have been working hard to strengthen production in Japan as well as China with our basis being the satisfaction of our clients. Hereafter, we will be transformed to a global enterprise centered in Asia such as Vietnam and India, and are planning to create a base in other countries as well. We have a large variety in our products in the auto industry and the electrical machine industry, so it is suitable for each specification and environment.
Introduction of promoted products and technologies
Auto partsParts of the auto navigation system and auto navigation devicesCar audio parts
Strength and Characteristics of our products
Tapping: The tapping of our company can be finished under the same process. The maximum number of pieces for tapping at the same time is 12, so it can dramatically reduce the cost and shorten the delivery period to improve engineering management. One-stop production system:Our company provides a one-stop production system including pressing metal pattern design, trial manufacture of metal patterns, pressing, arc welding, welding and mass production. The introduced robot welding can finish the welding more quickly and neatly. Wire-electrode cutting: The wire-electrode cutting of our company is extremely corresponding to the pressing industry. With this technology, it can make metal patters without holes. This technology can make pressing on sheets 0.05mm thick.
Corporate Profile
Company Name : Shoei Kogyo Co., Ltd.
Location : 4-1-19 Tote, Saiwai-ku, Kawasaki-city, Kanagawa 212-0005
Representative : Toshiei Iguchi
TEL : +81-44-522-1481 FAX : +81-44-522-1484 URL : http://www.shoei-kgy.co.jp
Founded in : Oct 1956 Capital : 50 MILLION JPY Employees : 50
Contact Person
Business sector : Transportation equipment manufacturing Annual Sales : 720 MILLION JPY
Received credentials or certification : ISO9001, ISO14000
Scope of Business : Design and manufacturing of pressing and pressing metal patterns (auto parts)
Manufacturing and assembling of auto navigation system, car audios, and parts for printers.
Position/Title : Executive Director Name : Hiroyuki Iguchi E-mail : [email protected] Tel : +81-44-522-1481
[Shoei Industry for pressing] pursue satisfaction for our clients and create reliable products.
Shoei Kogyo Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Console box hinge OA machine (plate spring)Engine bracket
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
52
Corporate ProfileFeb 2010 Established in present location.With the objective of manufacturing whatever we can, we are mainly producing products concerning trial manufacture parts, parts of equipment, parts of aircrafts, fuel cells and other relative parts. In order to broadly cater for our clients’ demands of shape, materials, quality and delivery period, we use working machines of all kinds to manufacture parts easily. Centering on our young employees, we work positively.
Introduction of promoted products and technologies
• Metal cutting service: Besides general materials (aluminum, iron, SUS and copper), we can also cut various materials such as Inconel, kovar, and nickel. We are best at producing products that cannot have scars, products that need chucking, and products that have many production requirements. • Heteromorphism machining: We can process parts according to
drawings and can manufacture products in 3D of complicated shapes such as aviation parts and auto parts according to the design drawings by the clients. We also use the latest TOPcam and Mastercam in CAD/CAM system to make processing programs, and then use the 5 axle processing machines and other machines together to process the products. • Carbon and resin materials processing: not only carbon materials but
also quartz glass, GC (glassy carbon), FRP, CFRP, C/C (carbon
composite), SiC (silicon carbide), alumina, and other ceramic material. • Electrical discharge machining with wires: We not only do the
processing of common shapes for plates, but also of parts where the upper and lower shapes differ; the materials can be metal or other special materials such ceramics that have electroconductibility. • Trial manufacturing: With research and development, we can make
the most suitable scheme fully considering the accuracy of trial manufacture, delivery period and cost. We challenge for new work everyday according to the latest demands of our clients. • Design: We began our designing business through the accumulation
of experiences with manufacturing clamps, equipment, and parts suitable for researching and developing. • We will determine the specifications and schemes needed by the
client through communication, and present the most suitable parts, clamps, and equipment.
Strength and Characteristics of our products
• We have the cutting and processing technology for any shape with the lathe and 5 axle processing equipment. We also have many equipment to create high quality and high precision. • We have the electrical discharge processing technology through
wire-electrode cutting and die carving electrical discharge processing. • The motorcycle part [SYNCEDGE] with eye-catching shapes and
precision is our company’s brand name product. (Our company’s representative had the manufacturing experience as a champion in Japan)
Corporate Profile
Company Name : SYNCFOR INC.
Location : 370 Enzo, Chigasaki-city, Kanagawa 253-0084
Representative : You Yamashita
TEL : +81-467-86-4194 FAX : +81-467-82-7189 URL : http://www.syncfor.co.jp
Founded in : Feb 2010 Capital : 10 MILLION JPY Employees : 20
Contact Person
Business sector : Trial manufacturing and manufacturing of auto parts Annual Sales : 220 MILLION JPY
Scope of Business : Designing and manufacturing of machines and equipment for research and trial manufacturing,
processing precise mechanical parts, electrical discharge processing, and manufacturing of electrode.
Position/Title : Representative Director Name : You Yamashita E-mail : [email protected] Tel : +81-467-86-4194
All kinds of high precision and high quality products
Latest simultaneous 5 axle machining machine Unique SYNCEDGE product
Developing, Designing, Prototype Parts, we deliver seamless services.
SYNCFOR INC.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
53
Corporate Profile1966 : Began the enterprise as auto repair2006: Rewarded as Excellent Factory of Kanagawa
Prefecture2007: Brought in the VPSS to make the factory visual.2012: Specified as the model factory of middle and
small-sized enterprises of Kanagawa Prefecture
Introduction of promoted products and technologies
Tashiro Co., Ltd can deliver products within 24 hours. From the precise sheet metal processing to precise mechanical processing, we use the NC machine for all processing.With CAD(DXF) data sent via e-mail, we use the most suitable processing to manufacture products. Precise sheet metal processing: laser processing (thickness 0.2t~32), welding processing (argon welding, CO2 welding)
Bending, welding, high speed steel rivetingPrecise mechanical processing: cutting and wire-electrode cutting electrical discharge
Strength and Characteristics of our products
Because laser cutting, bending, and welding will all be finished in our factory, we can take orders of short delivery period. We accept anything from trial manufacture to big b a t c h p ro d u c t i o n ! B e c a u s e t h e m a c h i n i n g a n d wire-electrode cutting is finished in our factory as well, we can immediate ly make addi t iona l manufactur ing accordingly. Laser combination machine, laser processing machine, machining center, wire-electrode cutting, electrical discharge processing equipment, NC bender, NC cutting, CAD/CAM
Corporate Profile
Company Name : Tashiro Co., Ltd.
Location : 284-1 Ino Hiratsuka-city, Kanagawa 259-1216
Representative : Yuji Tashiro
TEL : +81-463-31-7118 FAX : +81-463-35-0170 URL : http://www.tasiro.co.jp
Founded in : Apr 1966 Capital : 20MILLION JPY Employees : 15
Contact Person
Business sector : Precise sheet metal processing Annual Sales : 350 MILLION JPY
Received credentials or certification : ISO9001
Scope of Business : Precise sheet-metal working and precise mechanical processing
Position/Title : CTO Name : Shinya Maeda E-mail : [email protected] Tel : +81-463-31-7118
Tashiro Co., Ltd.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Digital instant delivery system 6Kw laser processing equipment SUS304 20mm clean cutting
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
54
Corporate Profile1970 Established PK engineering Ltd. with 100% financing
by PRESS KOGYO CO., LTD 1988 Changed the company name to Tecmo Co., Ltd.1989 Initiated the designing, developing and sales business
with original products.1991 Introduced 3D-CAD to keep up with the 3D trend of
design data. Participated in development of vehicles for theme park.
1992 Launched the design business for overseas customers. Launched the design business for overseas cus tomers . Under took the deve lopment o f passenger cars, commercial vehicles, construction machinery, etc.
1998 Introduced ICEM-Surf and started to create the d e s i g n d a t a ( C l a s s A s u r f a c e d a t a ) f o r mass-produced vehicle.
2000~2013 Introduced NX(UG), CATIA V5, Creo(Pro/E). Greatly expanded the customer base.※We are s t r i v ing to cons tan t l y enhance our
equipments to meet the customer’s needs by various measu res i nc lud ing ex tens ion o f CAD and introduction of analysis software (Hyper Works).
Introduction of promoted products and technologies
We are technical experts which undertake the development of automobile and construction machinery.Along with the designer or engineer of automobile manufacturer and construction machinery manufacturer, we have been taking part in the development of the design, engineering, production technology, etc and have been making contributing to a vast number of mass-produced vehicle developments.
Strength and Characteristics of our products
■DesignSketch, CG and clay model of various products including automobile, motorcycle, construction machinery cab, etc・Capable to meet various needs of design development
including creation of surface data and DRM※Our area of specialty: Class A surface data of automotive interior and exterior components and motorcycle
■EngineeringCapable to meet the needs for various engineering such as the conception and layout engineering, detailed engineering and analysis/experiment and mold/jig and tool engineering of various products including white body, door, exterior/interior components, chassis, module parts of automobile and construction machinery cab.※We are making good use of NASTRAN, LS-Dyna,
PAM-CRASH/STAMP and Marc to ve r i f y t he engineering feasibility (such as the strength, rigid or the formability of the pressed parts). Moreover, bench tests and material tests by using real machines are all available here.
※Our area of specialty: from structural engineering to analysis/experiment of body, chassis frame and the like;
: lightweight design/rationalized engineering for machinability and assemblability improvement and the like;
: from layout engineering to detailed engineering of exterior/interior/electrical components.
■Available instrumentsCATIA V5, NX, Creo(Pro/E), Hyper Works, ICEM-Surf, Alias, Rhinoceros
Design data of passenger vehicle Design study(microbus) Design study (EV)
Design & Engineering Solution for Automobile, Motorcycle, Construction Machinery.
TECMO CO.,LTD
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Corporate ProfileCompany Name : TECMO CO.,LTD
TEL : +81-466-87-7821 FAX : +81-466-88-8320 URL : http://www.tecm.co.jpFounded in : Aug 1970 Capital : 20 MILLION JPY Employees : 180 Representative : Shinji Tokunaga
Location : 1-31-2 Ishikawa Fujisawa-city, Kanagawa 252-0815
Business sector : Automotive-related Industry Annual Sales : 1,500 MILLION JPY
Position/Title : General Affairs・Personnel Group Assistant General Manager Name : Hisashi TakeuchiE-mail : [email protected] Tel : +81-466-87-7821
Scope of Business : ■Business Field : Automobile, Construction Machinery, Motor Cycle, Aero Space, etc.・Design Dpt. : Styling Design, Digital Modeling (Concept Design, Class-A)・Engineering Dpt. : Body, Chassis Frame, Axle & Suspension, Exterior, Interior, Seat, etc.
Contact Person
Autom
obile Parts and
Accessories M
anufacturing
55
Corporate Profile1987 Began to manufacture and sell heaters. 1990 Established “ThreeHigh co.,ltd.・head office” in
Kanagawa Prefecture ,Kawasaki City1994 Established the Nagoya factory in Aichi Prefecture,
Nagoya City 2004 Moved the headquarter to the present location. 2005 Gained ISO14001 certification.2007 Gained ISO9001 certification and participated into
planning the vocational instruction program of the Ministry of Education.
2010 Was rewarded as the excellent factory by kanagawa government.
2012 Was rewarded as Community-Based Enterprise in Yokohama (with the highest score)
Was rewarded as the Excellent Enterpriser by Yokohama Chamber of Commerce and Industry (representative of our company)
Authorized as Yokohama Future Enterprise of Intellectual Property
Introduction of promoted products and technologies
As the manufacturer of silicone rubber heaters, we are best at freeze prevention, heat preservation, heating and pre-heat treatment of all shapes such as pipes, tanks, cans, and surfaces. We can make from one piece to mass production, and can handle from -50℃ as the lowest temperature and 700℃ as the high temperature.
Strength and Characteristics of our products
1 Heate rs : Can prov ide f reeze p revent ion , hea t preservation, heating and pre-heat treatment for pipes, tanks, cans, etc. for all types of industries.
2 Temperature regulator: Used to control the temperature of the heater.
3 Temperature sensor: used to measure the temperature of the heater.
4 Thermal insulation material: A material of protecting the heater and strengthening the efficiency of the heater.
(Illustration photos: ①~④)
Corporate Profile
Company Name : ThreeHigh Co., Ltd
Location : 4-42-16 Higashiyamata Tsuzuki-ku, Yokohama-city, Kanagawa 224-0023
Representative : Makoto Ozawa
TEL : +81-45-590-5561 FAX : +81-45-590-5571 URL : http://www.threehigh.co.jp
Founded in : Nov 1990 Capital : 10 million yen Employees : 11
Contact Person
Business sector : Manufacturing and sales of electric heaters for enterprise and industry Annual Sales : 200 MILLION JPY
Received credentials or certification : ISO14001(2005), ISO9001(2007)
Scope of Business : Design, development, manufacturing and sales of electric heaters, temperature control equipment
and temperature sensors for enterprises and industry
Position/Title : Representative Director Name : Makoto Ozawa E-mail : [email protected] Tel : +81-45-590-5561
Various heaters Temperature regulator Temperature sensor Heat insulation material
We have a heat mind.
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
ThreeHigh Co., Ltd
Aut
omob
ile P
arts
and
A
cces
sorie
s M
anuf
actu
ring
56
Corporate Profile1943 Established to manufacture the parts of fighter aircraft. 1955 Began to conduct internal design for metal dies and manufacture
the parts of heat exchangers for autos.1968 Became a joint stock company. 1975 Began to manufacture parts of the automatic gearboxes for autos.1992 Began to manufacture the protective pipes of the temperature
sensors with precision deep drawing technology. 1998 Began to make trial manufacture of the partition panel for fuel cells. 2007 Began to manufacture the parts of the medical treatment
machines. 2012 Received the Ecological Activity 21 Certification by Japan
Ministry of Environment.
Introduction of promoted products and technologies
We produce high precision pressed products satisfying the clients with the most suitable metal die design according to the characteristics of the materials. We are best at deep drawing processing of the cylinder stainless steel. • Precision deep drawing processing: for batch productions of
stainless steel with punched depth more than 10 times of the diameter, deep drawing of cylinders les than 0.03mm dimensional tolerance.
• Sheet fin processing: processing of metal sheet fins with high flatness rate of less than 0.5mm/100mm bending degree. This technology is used for internal fins of the heat exchanger and the duel cell separator.
• High precision involute serration blanks: our company is best at clear punch forming of the close accuracy blanks of high flatness and less burrs. The parts concerning AT autos gain good comments.
Strength and Characteristics of our products
1 Squeezing pipes and materials: SUS430, thickness of the material: 1.0mm, thickness of the finished sheet: 0.375±0.017mm, min tolerance:±0.015mm.
Control the thickness of the finished sheet by squeezed and compressed transformation while controlling the hardening to avoid stress cracking.
2 Excursion fin and material: aluminum thickness 0.4mm, pitch of grooves: 5mm, bending degree on the feeding direction: within 0.5mm/100mm. Because complicated excursed forms will cause many deformed areas, it is used to control the springback of each area to avoid bending.
3 Knurling fin and material: SUS304, thickness: 0.3mm, pitch of grooves: 5mm, flatness: within 0.1mm.One stop procedure of our press conducts complicated processing with many deformed areas, but we restrain the distortion to create high flatness.
Corporate Profile
Company Name : Worldwing Co.,Ltd
Location : 1029 Shobusawa, Fujisawa-city, Kanagawa 252-0823
Representative : Takashi Noguchi
TEL : +81-466-48-4612 FAX : +81-466-48-5288 URL : http://www.worldwing.co.jp
Founded in : Nov 1943 Capital : 45 MILLION JPY Employees : 48
Contact Person
Business sector : Manufacturing of auto parts Annual Sales : 570 MILLION JPY
Received credentials or certification : ISO9001:2008 (1997)
Scope of Business : Precise deep drawing, press processing, and trial manufacturing for auto AT parts, parts of the heat exchanger,
temperature/gas sensor parts, parts of the medical treatment machines, and other stainless steel & titanium products.
Position/Title : Development section Manager Name : Hiroo Takano E-mail : [email protected] Tel : +81-466-48-4612
Conduit part for the engine Cooling fin Fuel cell separator
Deep drawing with 0.03mm tolerance, fin forming with 0.1mm flatness, and other precision sheet metal press forming using stainless steel, titanium, aluminum, etc.
Worldwing Co.,Ltd
Desired business for expansion
Export Import Set-up of sales basesOn-site production Production consignment Sales consignment Technology licensing Joint-venture operation
Autom
obile Parts and
Accessories M
anufacturing
57
International Business Division
Industry and Energy Department
Industry and Labor Bureau
Kanagawa Prefectural Government
Office Address :
1 Nihon-odori, Naka-ku, Yokohama City, Kanagawa
231-8588
TEL : +81-45-210-5565 FAX : +81-45-210-8875
KANAGAWA Automotive Industry Companies
Kanagawa Prefectural Government
2013.11