7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

1/36

Production Summary - Full Simulation

Haulage System: Transporte de Mineral (Au)/aos) Haul Cycle: [PRJ] Ruta de Transporte Base_Mineral

Mater ial : [PRJ] Mineral (Au) Roster: [PRJ] 7 day Week - 12 Hour Sh if ts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 219.16

Production per Loader Operating Shift tonne 2,155 Max. prod. based on 100% avail.

Production per Year tonne 1,062,447 Avg. production factored by avail.

Wait Time per Operating Hour min 24.50

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.37

Production per Operating Hour tonne 243.51

Production per Loader Operating Shift tonne 2,155

Production per Year tonne 1,062,447

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 5.50

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

Average Cycle Time min/ Cycle 12 25

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

2/36

Average Cycle Time min/ Cycle 12 25

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros ter : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ru ta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 2.3 0.0Spot Tiempo de Maniobra Auto Mins 0.40 3.3 0.0Load Carguo Auto Mins 5.24 42.8 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 3.4 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 364 10.0 2.5 0.0 Full 1.79 14.6 20.0 12.0 12.2 36.4 0.0 100.03 Superficie con Pendi 336 4.0 3.0 0.0 Full 0.99 8.1 21.3 19.0 Retard 20.4 13.4 0.0 96.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 19.0 19.0 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 2.6 17.5 0.0 Final Sp. 9.5 0.0 0.0 0.0Spot Spot at Dump Auto Mins 0.33 2.7 0.0Dump Dumping Auto Mins 0.50 4.1 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 2.1 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 336 -4.0 3.0 0.0 Empty 0.57 4.7 40.0 30.0 Final Sp. 35.2 -13.4 0.0 12.89 Rampa del Pit (Regre 364 -10.0 2.5 0.0 Empty 0.75 6.1 30.0 20.0 Final Sp. 29.3 -36.4 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 3.4 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 1,700 12.25 100.00 8.3 0

2

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

3/36

Production Summary - Full SimulationHaulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.53

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 205.82

Production per Loader Operating Shift tonne 2,024 Max. prod. based on 100% avail.

Production per Year tonne 997,797 Avg. production factored by avail.

Wait Time per Operating Hour min 25.89

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.36Production per Operating Hour tonne 228.69

Production per Loader Operating Shift tonne 2,024

Production per Year tonne 997,797

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.23

Average Travel Time min/ Cycle 6.30

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

Average Cycle Time min/ Cycle 13 05

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

4/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 2.1 0.0Spot Tiempo de Maniobra Auto Mins 0.40 3.1 0.0Load Carguo Auto Mins 5.23 40.1 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 3.1 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 468 10.0 2.5 0.0 Full 2.31 17.7 20.0 12.0 12.1 46.8 0.0 100.03 Superficie con Pendi 323 5.0 3.0 0.0 Full 1.08 8.3 18.2 18.2 Rimpull 17.9 16.2 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 18.2 18.2 Retard 0.0 0.0 0.0 Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 2.4 17.8 0.0 Final Sp. 9.5 0.0 0.0 0.0Spot Spot at Dump Auto Mins 0.33 2.5 0.0

Dump Dumping Auto Mins 0.50 3.8 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 2.0 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 323 -5.0 3.0 0.0 Empty 0.55 4.2 40.0 30.0 Final Sp. 35.0 -16.2 0.0 9.89 Rampa del Pit (Regre 468 -10.0 2.5 0.0 Empty 0.95 7.3 30.0 20.0 Final Sp. 29.4 -46.8 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 3.1 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 1,882 13.05 100.00 8.7 0

4

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

5/36

Production Summary - Full Simulation

Haulage System: Transporte de Mineral (Au)/aos) Haul Cycle: [PRJ] Ruta de Transporte Base_Mineral

Mater ial : [PRJ] Mineral (Au) Roster: [PRJ] 7 day Week - 12 Hour Sh if ts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.53

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 165.72

Production per Loader Operating Shift tonne 1,630 Max. prod. based on 100% avail.

Production per Year tonne 803,395 Avg. production factored by avail.

Wait Time per Operating Hour min 29.67

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.35

Production per Operating Hour tonne 184.14

Production per Loader Operating Shift tonne 1,630

Production per Year tonne 803,395

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.23

Average Travel Time min/ Cycle 9.38

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

Average Cycle Time min/ Cycle 16 12

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

6/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros ter : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ru ta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.7 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.5 0.0Load Carguo Auto Mins 5.23 32.4 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.5 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 936 10.0 2.5 0.0 Full 4.66 28.9 20.0 12.0 12.1 93.6 0.0 100.03 Superficie con Pendi 280 5.0 3.0 0.0 Full 0.94 5.8 18.2 18.2 Rimpull 17.8 14.0 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 18.2 18.2 Retard 0.0 0.0 0.0 Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 2.0 17.8 0.0 Final Sp. 9.5 0.0 0.0 0.0Spot Spot at Dump Auto Mins 0.33 2.0 0.0

Dump Dumping Auto Mins 0.50 3.1 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.6 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 280 -5.0 3.0 0.0 Empty 0.49 3.0 40.0 30.0 Final Sp. 34.3 -14.0 0.0 11.19 Rampa del Pit (Regre 936 -10.0 2.5 0.0 Empty 1.89 11.7 30.0 20.0 Final Sp. 29.7 -93.6 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.5 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 2,732 16.12 100.00 10.2 0

6

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

7/36

Production Summary - Full SimulationHaulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.87

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 174.28

Production per Loader Operating Shift tonne 1,714 Max. prod. based on 100% avail.

Production per Year tonne 844,881 Avg. production factored by avail.

Wait Time per Operating Hour min 28.89

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.37Production per Operating Hour tonne 193.64

Production per Loader Operating Shift tonne 1,714

Production per Year tonne 844,881

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 8.62

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

Average Cycle Time min/ Cycle 15 37

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

8/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.8 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.6 0.0Load Carguo Auto Mins 5.24 34.1 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.7 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 806 10.0 2.5 0.0 Full 4.01 26.1 20.0 12.0 12.1 80.6 0.0 100.03 Superficie con Pendi 311 5.0 3.0 0.0 Full 1.04 6.8 18.2 18.2 Rimpull 17.9 15.6 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 18.2 18.2 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 2.1 17.8 0.0 Final Sp. 9.5 0.0 0.0 0.0Spot Spot at Dump Auto Mins 0.33 2.1 0.0

Dump Dumping Auto Mins 0.50 3.2 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.7 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 311 -5.0 3.0 0.0 Empty 0.54 3.5 40.0 30.0 Final Sp. 34.8 -15.6 0.0 10.19 Rampa del Pit (Regre 806 -10.0 2.5 0.0 Empty 1.63 10.6 30.0 20.0 Final Sp. 29.7 -80.6 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.7 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 2,534 15.37 100.00 9.9 0

8

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

9/36

Production Summary - Full SimulationHaulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 178.81

Production per Loader Operating Shift tonne 1,758 Max. prod. based on 100% avail.

Production per Year tonne 866,822 Avg. production factored by avail.

Wait Time per Operating Hour min 28.43

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.36Production per Operating Hour tonne 198.67

Production per Loader Operating Shift tonne 1,758

Production per Year tonne 866,822

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 8.24

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

A erage C cle Time min/ C cle 14 99

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

10/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.9 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.7 0.0Load Carguo Auto Mins 5.24 34.9 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.7 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 676 10.0 2.5 0.0 Full 3.36 22.4 20.0 12.0 12.1 67.6 0.0 100.03 Superficie con Pendi 368 7.0 3.0 0.0 Full 1.49 10.0 14.9 14.9 Rimpull 14.8 25.8 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 14.9 14.9 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 2.1 16.8 0.0 Final Sp. 9.4 0.0 0.0 5.3Spot Spot at Dump Auto Mins 0.33 2.2 0.0

Dump Dumping Auto Mins 0.50 3.3 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.7 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 368 -7.0 3.0 0.0 Empty 0.62 4.1 40.0 30.0 Final Sp. 35.6 -25.8 0.0 2.59 Rampa del Pit (Regre 676 -10.0 2.5 0.0 Empty 1.37 9.1 30.0 20.0 Final Sp. 29.6 -67.6 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.7 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 2,388 14.99 100.00 9.6 0

10

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

11/36

Production Summary - Full SimulationHaulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.87

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 165.76

Production per Loader Operating Shift tonne 1,630 Max. prod. based on 100% avail.

Production per Year tonne 803,592 Avg. production factored by avail.

Wait Time per Operating Hour min 29.65

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.35Production per Operating Hour tonne 184.18

Production per Loader Operating Shift tonne 1,630

Production per Year tonne 803,592

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 9.42

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

A C l Ti i / C l 16 17

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

12/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.7 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.5 0.0Load Carguo Auto Mins 5.24 32.4 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.5 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 780 10.0 2.5 0.0 Full 3.88 24.0 20.0 12.0 12.1 78.0 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 11.8 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 2.0 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 2.0 0.0

Dump Dumping Auto Mins 0.50 3.1 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.6 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 4.1 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 780 -10.0 2.5 0.0 Empty 1.58 9.8 30.0 20.0 Final Sp. 29.7 -78.0 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.5 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 2,648 16.17 100.00 9.8 0

12

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

13/36

Production Summary - Full SimulationHaulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 155.02

Production per Loader Operating Shift tonne 1,524 Max. prod. based on 100% avail.

Production per Year tonne 751,490 Avg. production factored by avail.

Wait Time per Operating Hour min 30.64

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.36

Production per Operating Hour tonne 172.24

Production per Loader Operating Shift tonne 1,524

Production per Year tonne 751,490

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 10.52

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

A C l Ti i / C l 17 26

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

14/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.6 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.3 0.0Load Carguo Auto Mins 5.24 30.3 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.4 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 936 10.0 2.5 0.0 Full 4.66 27.0 20.0 12.0 12.1 93.6 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 11.0 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.9 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.9 0.0

Dump Dumping Auto Mins 0.50 2.9 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.5 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 3.8 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 936 -10.0 2.5 0.0 Empty 1.89 10.9 30.0 20.0 Final Sp. 29.7 -93.6 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.4 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 2,960 17.26 100.00 10.3 0

14

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

15/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 148.17

Production per Loader Operating Shift tonne 1,457 Max. prod. based on 100% avail.

Production per Year tonne 718,280 Avg. production factored by avail.

Wait Time per Operating Hour min 31.29

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.40

Production per Operating Hour tonne 164.63

Production per Loader Operating Shift tonne 1,457

Production per Year tonne 718,280

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 11.25

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

A C l Ti i / C l 18 00

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

16/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera lRolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.6 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.2 0.0Load Carguo Auto Mins 5.24 29.1 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.3 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1040 10.0 2.5 0.0 Full 5.18 28.8 20.0 12.0 12.0 104.0 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 10.6 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.8 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.8 0.0

Dump Dumping Auto Mins 0.50 2.8 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.5 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 3.7 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1040 -10.0 2.5 0.0 Empty 2.10 11.7 30.0 20.0 Final Sp. 29.8 -104.0 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.3 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 3,168 18.00 100.00 10.6 0

16

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

17/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 142.08

Production per Loader Operating Shift tonne 1,397 Max. prod. based on 100% avail.

Production per Year tonne 688,791 Avg. production factored by avail.

Wait Time per Operating Hour min 31.88

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.37

Production per Operating Hour tonne 157.87

Production per Loader Operating Shift tonne 1,397

Production per Year tonne 688,791

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 11.98

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

A C l Ti i / C l 18 72

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

18/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.5 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.1 0.0Load Carguo Auto Mins 5.24 28.0 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.2 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1144 10.0 2.5 0.0 Full 5.70 30.5 20.0 12.0 12.0 114.4 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 10.2 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.7 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.8 0.0

Dump Dumping Auto Mins 0.50 2.7 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.4 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 3.5 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1144 -10.0 2.5 0.0 Empty 2.30 12.3 30.0 20.0 Final Sp. 29.8 -114.4 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.2 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 3,376 18.72 100.00 10.8 0

18

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

19/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 136.87

Production per Loader Operating Shift tonne 1,346 Max. prod. based on 100% avail.

Production per Year tonne 663,503 Avg. production factored by avail.

Wait Time per Operating Hour min 32.27

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.35

Production per Operating Hour tonne 152.07

Production per Loader Operating Shift tonne 1,346

Production per Year tonne 663,503

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 12.70

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

A C l Ti i / C l 19 45

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

20/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.4 0.0Spot Tiempo de Maniobra Auto Mins 0.40 2.1 0.0Load Carguo Auto Mins 5.24 26.9 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.1 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1248 10.0 2.5 0.0 Full 6.22 32.0 20.0 12.0 12.0 124.8 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 9.8 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.7 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.7 0.0

Dump Dumping Auto Mins 0.50 2.6 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.3 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 3.4 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1248 -10.0 2.5 0.0 Empty 2.51 12.9 30.0 20.0 Final Sp. 29.8 -124.8 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.1 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 3,584 19.45 100.00 11.1 0

20

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

21/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.53

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 129.71

Production per Loader Operating Shift tonne 1,275 Max. prod. based on 100% avail.

Production per Year tonne 628,814 Avg. production factored by avail.

Wait Time per Operating Hour min 32.99

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.34

Production per Operating Hour tonne 144.12

Production per Loader Operating Shift tonne 1,275

Production per Year tonne 628,814

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.23

Average Travel Time min/ Cycle 13.80

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

C / C

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

22/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.4 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.9 0.0Load Carguo Auto Mins 5.23 25.5 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 2.0 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1404 10.0 2.5 0.0 Full 7.00 34.1 20.0 12.0 12.0 140.4 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 9.3 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.6 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.6 0.0

Dump Dumping Auto Mins 0.50 2.4 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.3 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 3.2 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1404 -10.0 2.5 0.0 Empty 2.82 13.8 30.0 20.0 Final Sp. 29.8 -140.4 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 2.0 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 3,896 20.53 100.00 11.4 0

22

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

23/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 124.93

Production per Loader Operating Shift tonne 1,229 Max. prod. based on 100% avail.

Production per Year tonne 605,654 Avg. production factored by avail.

Wait Time per Operating Hour min 33.27

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.37

Production per Operating Hour tonne 138.81

Production per Loader Operating Shift tonne 1,229

Production per Year tonne 605,654

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 14.53

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

24/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.3 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.9 0.0Load Carguo Auto Mins 5.24 24.6 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 1.9 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1508 10.0 2.5 0.0 Full 7.53 35.4 20.0 12.0 12.0 150.8 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 8.9 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.5 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.6 0.0

Dump Dumping Auto Mins 0.50 2.4 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.2 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 3.1 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1508 -10.0 2.5 0.0 Empty 3.03 14.3 30.0 20.0 Final Sp. 29.8 -150.8 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 1.9 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 4,104 21.28 100.00 11.6 0

24

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

25/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.87

Average Payload tonne 5.51

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 118.79

Production per Loader Operating Shift tonne 1,168 Max. prod. based on 100% avail.

Production per Year tonne 575,876 Avg. production factored by avail.

Wait Time per Operating Hour min 33.77

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.34

Production per Operating Hour tonne 131.99

Production per Loader Operating Shift tonne 1,168

Production per Year tonne 575,876

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.25

Average Travel Time min/ Cycle 15.62

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

26/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.3 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.8 0.0Load Carguo Auto Mins 5.25 23.4 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 1.8 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1664 10.0 2.5 0.0 Full 8.31 37.1 20.0 12.0 12.0 166.4 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 8.5 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.5 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.5 0.0

Dump Dumping Auto Mins 0.50 2.2 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.2 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 2.9 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1664 -10.0 2.5 0.0 Empty 3.34 14.9 30.0 20.0 Final Sp. 29.9 -166.4 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 1.8 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 4,416 22.38 100.00 11.8 0

26

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

27/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.53

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 113.48

Production per Loader Operating Shift tonne 1,116 Max. prod. based on 100% avail.

Production per Year tonne 550,110 Avg. production factored by avail.

Wait Time per Operating Hour min 34.23

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.37

Production per Operating Hour tonne 126.08

Production per Loader Operating Shift tonne 1,116

Production per Year tonne 550,110

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.23

Average Travel Time min/ Cycle 16.72

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

28/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.2 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.7 0.0Load Carguo Auto Mins 5.23 22.3 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 1.8 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1820 10.0 2.5 0.0 Full 9.09 38.8 20.0 12.0 12.0 182.0 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 8.1 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.4 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.4 0.0

Dump Dumping Auto Mins 0.50 2.1 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.1 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 2.8 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1820 -10.0 2.5 0.0 Empty 3.66 15.6 30.0 20.0 Final Sp. 29.9 -182.0 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 1.8 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 4,728 23.45 100.00 12.1 0

28

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

29/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.54

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 109.50

Production per Loader Operating Shift tonne 1,077 Max. prod. based on 100% avail.

Production per Year tonne 530,849 Avg. production factored by avail.

Wait Time per Operating Hour min 34.45

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.39

Production per Operating Hour tonne 121.67

Production per Loader Operating Shift tonne 1,077

Production per Year tonne 530,849

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.23

Average Travel Time min/ Cycle 17.45

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

30/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.2 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.7 0.0Load Carguo Auto Mins 5.23 21.6 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 1.7 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 1924 10.0 2.5 0.0 Full 9.62 39.8 20.0 12.0 12.0 192.4 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 7.9 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.3 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.4 0.0

Dump Dumping Auto Mins 0.50 2.1 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.1 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 2.7 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 1924 -10.0 2.5 0.0 Empty 3.86 16.0 30.0 20.0 Final Sp. 29.9 -192.4 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 1.7 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 4,936 24.18 100.00 12.2 0

30

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

31/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.87

Average Payload tonne 5.51

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 104.98

Production per Loader Operating Shift tonne 1,032 Max. prod. based on 100% avail.

Production per Year tonne 508,947 Avg. production factored by avail.

Wait Time per Operating Hour min 34.89

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.36

Production per Operating Hour tonne 116.65

Production per Loader Operating Shift tonne 1,032

Production per Year tonne 508,947

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.25

Average Travel Time min/ Cycle 18.54

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

32/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.1 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.6 0.0Load Carguo Auto Mins 5.25 20.7 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 1.6 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 2080 10.0 2.5 0.0 Full 10.40 41.1 20.0 12.0 12.0 208.0 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 7.5 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.3 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.3 0.0

Dump Dumping Auto Mins 0.50 2.0 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.0 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 2.6 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 2080 -10.0 2.5 0.0 Empty 4.18 16.5 30.0 20.0 Final Sp. 29.9 -208.0 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 1.6 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 5,248 25.30 100.00 12.4 0

32

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

33/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.87

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 100.51

Production per Loader Operating Shift tonne 988 Max. prod. based on 100% avail.

Production per Year tonne 487,257 Avg. production factored by avail.

Wait Time per Operating Hour min 35.24

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.38

Production per Operating Hour tonne 111.68

Production per Loader Operating Shift tonne 988

Production per Year tonne 487,257

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.24

Average Travel Time min/ Cycle 19.64

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

34/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e S ys tem : Tr an sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Haul Cycle : [PRJ ] Ruta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.1 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.5 0.0Load Carguo Auto Mins 5.24 19.9 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 1.6 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 2236 10.0 2.5 0.0 Full 11.18 42.4 20.0 12.0 12.0 223.6 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 7.2 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.2 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.3 0.0

Dump Dumping Auto Mins 0.50 1.9 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 1.0 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 2.5 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 2236 -10.0 2.5 0.0 Empty 4.49 17.0 30.0 20.0 Final Sp. 29.9 -223.6 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 1.6 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 5,560 26.39 100.00 12.6 0

34

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

35/36

Production Summary - Full Simulation

Haulage System: Transpor te de Mineral (Au) /aos) Haul Cycle: [PRJ] Ruta de Transpor te Base_Mineral

Material : [PRJ] Mineral (Au) Roster : [PRJ] 7 day Week - 12 Hour Sh ifts

Loader [PRJ] CATERPILLAR 385C (Dec 2006)

Availability % 90.00

Bucket Fill Factor 0.83

Average Bucket Load Volume cu.metres 2.88

Average Payload tonne 5.52

Operating Hours per Year OpHr/Year 4,847.83 Op. hrs factored by availability

Average Operating Shifts per Year shifts/Year 493.00 Shifts factored by availability

Average Bucket Cycle Time min 0.58Production per Operating Hour tonne 93.58

Production per Loader Operating Shift tonne 920 Max. prod. based on 100% avail.

Production per Year tonne 453,660 Avg. production factored by avail.

Wait Time per Operating Hour min 35.63

Truck [PRJ] CATERPILLAR 773E Dual Slope Body

Availability % 90.00

Payload in Template tonne 54.82

Operating Hours per Year OpHr/Year 4,363.05

Average Payload tonne 55.32

Production per Operating Hour tonne 103.98

Production per Loader Operating Shift tonne 920

Production per Year tonne 453,660

Queue Time at Loader min/ Cycle 0.28

Spot Time at loader min/ Cycle 0.40

Average Loading Time min/ Cycle 5.23

Average Travel Time min/ Cycle 21.45

Spot Time at Dump min/ Cycle 0.33

Average Dump Time min/ Cycle 0.50

7/26/2019 04.-TALPAC_MEMORIA-MINERAL-36P.pdf

36/36

Full Simulation ResultsMat er ial : [ PR J] Mi ner al (A u) H au lag e Sy st em : T ran sp or te de Mi ner al (A u)/ao s)

Ros te r : [PRJ ] 7 day Week - 12 Hour Sh if t s Hau l Cyc le : [PRJ] Ru ta de Transpor te Base_Minera l

Rolling Curve Segment Cycle Max Final Velocity Average Elevation Fuel % Duty

Type Segment Title D istance G rade Resist. Angle Load Time Time Vel. Vel. Limit. Velocity Change Usage Cycle

metres % % degrees % min % km/h km/h km/h metres litre/OpHr %

[PRJ] CATERPILLAR 773E Dual Slope Body

Queue Tiempo de Espera en Auto Mins 0.28 1.0 0.0Spot Tiempo de Maniobra Auto Mins 0.40 1.4 0.0Load Carguo Auto Mins 5.23 18.6 0.01 rea de Carguo 100 0.0 3.0 0.0 Full 0.41 1.5 20.0 20.0 Max. Sp. 14.6 0.0 0.0 45.42 Rampa del Pit 2496 10.0 2.5 0.0 Full 12.48 44.2 20.0 12.0 12.0 249.6 0.0 100.03 Superficie con Pendi 394 9.0 3.0 0.0 Full 1.90 6.7 12.4 12.4 Rimpull 12.4 35.5 0.0 100.04 Rampa en Desmonte 0 10.0 10.0 0.0 Full 0.00 0.0 12.4 12.4 Retard 0.0 0.0 #NUM! Undefined5 rea de Descarga 50 0.0 3.0 0.0 Full 0.32 1.2 15.5 0.0 Final Sp. 9.2 0.0 0.0 7.3Spot Spot at Dump Auto Mins 0.33 1.2 0.0

Dump Dumping Auto Mins 0.50 1.8 0.06 rea de Descarga (R 50 0.0 3.0 0.0 Empty 0.26 0.9 20.0 20.0 Max. Sp. 11.5 0.0 0.0 26.07 Rampa en Desmonte 0 -10.0 10.0 0.0 Empty 0.00 0.0 20.0 20.0 Rimpull 0.0 0.0 #NUM! Undefined8 Superficie con Pendie 394 -9.0 3.0 0.0 Empty 0.66 2.3 40.0 30.0 Final Sp. 35.8 -35.5 0.0 1.79 Rampa del Pit (Regre 2496 -10.0 2.5 0.0 Empty 5.01 17.8 30.0 20.0 Final Sp. 29.9 -249.6 0.0 0.010 rea de Carguo (Reg 100 0.0 3.0 0.0 Empty 0.41 1.5 20.0 0.0 Final Sp. 14.6 0.0 0.0 8.3

Total 6,080 28.20 100.00 12.9 0

36