0c40670699e4813ef6601d9fb6718a66m_mahfoz_c.v_20_nov_startup

Upload: elrajil

Post on 03-Jun-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/13/2019 0c40670699e4813ef6601d9fb6718a66M_mahfoz_C.V_20_nov_startup

    1/4

  • 8/13/2019 0c40670699e4813ef6601d9fb6718a66M_mahfoz_C.V_20_nov_startup

    2/4

    2 of 4

    Position SeniorShiftChargeEngineer.Company Middle Delta Electr icity Production Company (MDEPCO)

    Location Nubaria combined cycle (3x 750 Mw) power station

    Responsibilities:

    1. Two Modules Each Module Consists Of :a) Two combustion gas turbine 250 mw type V94.3a

    b) Two horizontal type heat recovery steamHRSG

    c) One Mitsubishi steam turbine 250MW type TC2F HP , IP AND LP

    steam lines

    2. One Module Consists Of :

    a) TwoGE CTG250MWtype(9FA)

    b) Two horizontal type heat recovery steamHRSG

    c) One steam turbine 250MW

    3. 220 kV switch yard

    4. 500 kV switch yard

    5. Four tie transformers 500/220 kV

    6. Medium (6.3 kV) and low (400 v) voltage switch gear

    Besides I do training courses for new engineers and technical.

    Position Commissioning& startup engineerCompany Middle Delta Electr icity Production Company (MDEPCO)

    Location Nubaria combined cycle (3x 750 Mw) power station

    Responsibilities:

    Mitsubishi Steam Turbine (2 x 250 MW) Commissioning, start-up, performance,

    reliability tests and operation.

    GE combustion gas turbine 250 MW type 9FA Commissioning, start-up,

    performance, reliability tests and operation.

    Siemens Gas Turbine (4x250 MW) Type V94.3A. Commissioning, start-up,

    performance, reliability tests and operation.

    Position ConstructionengineerCompany Middle Delta Electr icity Production Company (MDEPCO)

    Location Nubaria combined cycle (3x 750 Mw) power station

    Responsibilities:

    Responsible of reviewing all technical submittals and inspection types of valves andpumps asTERMOMECHANICAand KSB pumps.

  • 8/13/2019 0c40670699e4813ef6601d9fb6718a66M_mahfoz_C.V_20_nov_startup

    3/4

    3 of 4

    TRAINING COURSES

    1. On-Shore Basic Training for GE Gas Turbine V. 9FA (5 weeks) under the direction of

    GE in Nubaria Power Station.

    2. Training course in Japan (2 weeks), under the direction of Mitsubishi Heavy Industries

    Ltd. Nagasaki Shipyard & Machinery Works, covered the following:

    Turbine governing system.

    Operation of steam turbine.

    DEH control.

    ATS control.

    Turbine Inter lock.

    Turbine Control System.

    Auxiliary Equipment control.

    MHI Factories tours.

    General description of STG

    Surface condenser.

    Gland steam condenser & fan.

    Lube oil cooler.

    Condenser vacuum pump.

    Lube cleaning system.

    Debris filter.

    Condenser water vacuum pump.

    3. Training Course in Japan (Kobe and Takasago), (2 weeks), under the direction of

    Mitsubishi Electric Corporation Energy Systems Center, covered the following:

    Operation for Generator & Generator Auxiliary Systems.

    Maintenance for Generator & Generator Auxiliary Systems.

    Generator Design & Structure.

    Generator Auxiliary Systems.

    Generator Excitation Systems.

    Generator Protection & Control Systems.

    4. On-Shore in Nubaria Power Station (2 weeks), under the direction of Mitsubishi Electric

    Corporation Energy Systems Center, covered the following:

    Generator Design & Structure.

    Generator Auxiliary Systems.

    Maintenance for Generator & Generator Auxiliary Systems.

    Operation for Generator & Generator Auxiliary Systems.

    5. On-Shore in Nubaria Power Station, under the direction of Mitsubishi Heavy Industries,

    covered the following:

    Steam Turbine Gland Sealing and Vacuum up test.

    Steam Turbine Rolling and Speed up test.

    By Pass Operation.

    No Load Operation, Part Load & Full Load Operation.

    25%, 50%, 75% and 100% Load Rejection test.

    Normal Operation & Trouble Shooting.

  • 8/13/2019 0c40670699e4813ef6601d9fb6718a66M_mahfoz_C.V_20_nov_startup

    4/4

    4 of 4

    6. Basic Operation Training for Gas Turbine V.94.3A (12 days), under the direction of

    Siemens PG in Damanhour, covered the following:

    Introduction to the plant.

    Electrical and I&C part.

    Gas Turbine.

    Plant operation

    7. Operation and Maintenance of Combined Cycles (1 month), Damanhour, by West Delta

    Production Company (WDEPCO).

    8. Another Training Course at Nubaria Power Station Site in:

    Service & Instrument Air Compressors by Initec Energia.

    Service, raw and closed cooling pumps by KSB.

    Continuous Emission Monitoring Control System, ALTEC Environment Technology - USA,

    held in Nubaria Power Station (4 days).

    SKILLS

    Language :Arabic (mother tongue)

    English (very good)

    Computerskills : MS- office (word, excel, power point, ms project) and internet

    applications

    PERSONAL DATA

    Date of bir th : 31thMarch 1979

    Maritalstatus : Married (2 Child ren)

    Nationality : Egyptian

    Passport no. : 2690376

    DateofIssue : 17thAugust 2004

    DateofExpiry : 16thAugust 2013