1. abdul aziz safiee (cd 4915)
TRANSCRIPT
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
1/24
DESIGN AND MANUFACTURE SIMPLE PORTABLE ASTRO RECEIVERSTAND
ABDUL AZIZ BIN SAFIEE
A report submitted in partial fulfillment of the requirements for the award of the
Diploma of Mechanical Engineering
Faculty of Mechanical Engineering
Universiti Malaysia Pahang
DISEMBER 2010
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
2/24
ii
SUPERVISOR DECLARATION
I hereby declare that I had read this thesis and in my opinion this thesis is sufficient
in terms of scope and quality for the purpose of the granting of Diploma of
Mechanical Engineering.
Signature :
Name of Supervisor : EN IDRIS BIN MAT SAHAT
Position : LECTURER
Date : .
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
3/24
iii
STUDENT DECLARATION
I declare that this thesis entitled SIMPLE PORTABLE ASTRO RECEIVER STAND
is the result of my own research except as cited in references. The thesis has not been
accepted for any diploma and is not concurrently submitted in candidature of any other
diploma.
Signature :
Name : ABDUL AZIZ BIN SAFIEE
ID Number : MB08071
Date : 29 NOVEMBER 2010
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
4/24
iv
DEDICATION
To my beloved father and mother
SAFIEE BIN HASSAN
ZALEHA BINTI ABDULLAH
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
5/24
v
ACKNOWLEDGEMENTS
First of all I am grateful to ALLAH S.W.T for blessing me in finishing my final
year project (FYP) with success in achieving my objectives to complete this project.
Secondly I want to thank my family for giving morale support and
encouragement in completing my project and also throughout my study in UMP as they
are my inspiration to success. I also would like to thank my supervisor EN IDRIS BIN
MAT SAHAT for guiding and supervising my final year project throughout this
semester. He has been very helpful to me in finishing my project and I appreciate every
advice that he provided in correcting my mistakes. The credits also goes to all lecturers,
tutors, teaching engineers (JP) and assistant teaching engineers (PJP) for their
cooperation and guide in helping me finishing my final year project.
Lastly, I want to thank all my friends that have given me advice and
encouragement in completing my project. Thank you very much to all and may ALLAH
bless you.
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
6/24
vi
ABSTRACT
This thesis deals with design and fabricate simple portable Astro receiver stand.
Most Astro transmitter stand stationary and difficult to remove and not portable User or
the people of Malaysia do not have to worry about to move or carry anywhere, Since
Simple Portable Astro Receiver Stand (SPARS) is produced whereas the stand is not
heavy and easy for storage. Because SPARS is lightweight and not too big, the
installation does not revere long time, for example in the corridor, with clamp that has
been modified, easier to be installed anywhere. This product can be installed or adjusted
at high or lower place. Final product is durable and can withstand cold and rough
environment. It is able to withstand tropical climates and can be placed anywhere, inside
or outside the hause.
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
7/24
vii
ABSTRAK
Tesis ini membentangkan rekaan dan pembuantan Penahan Pemancar Astro
Mudah alih. Kebanyakkan stand pemancar Astro adalah terhad dan sukar untukdialihkan. Oleh itu, dengan adanya penahan pemancar astro mudah alih ini,pengguna
atau rakyat malaysia tidak perlu lagi risau untuk mengalih atau membawa kemana-mana,
hal ini kerana stand ini tidak terlalu berat dan mudah untuk disimpan. Disebabkan stand
ini ringan dan tidak terlalu besar jadi pemasangannya tidak mengambil masa yang lama,
contohnya di koridor,dengan adanya pengapit yang telah di ubah suai,memudahkan
untuk dilekatkan dimana-mana. Stand ini jaga boleh dipasang atau dilaraskan di tempat
yang tinggi atau rendah. Hasil kerja akhir ini tahan lama dan mampu bertahan keadaan
dingin dan kasar. Hal ini mampu menghadapi iklim tropika dan boleh ditempatkan di
mana-mana, dalam mahupun luar bilik.
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
8/24
viii
TABLE OF CONTENTS
PAGE
TITLE i
SUPERVISOR DECLARATION ii
AUTHOR DECLARATION iii
DEDICATION iv
ACKNOWLEDGEMENTS v
ABSTRACT vi
ABSTRAK vii
TABLE OF CONTENTS viii
LIST OF TABLES xii
LIST OF APPENDICES xii
LIST OF FIGURES xiii
CHAPTER 1 INTRODUCTION PAGE
1.0 Introduction 1
1.1 Project background 1
1.2 Problem statement 2
1.3 Objective 2
1.4 Scope 2
1.5 Flow chart 31.6 Gantt Chart 4
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
9/24
ix
CHAPTER 2 LITERATURE REVIEW PAGE
2.1 Introduction 5
2.2 V-sat antenna 5
2.2.1 Material used 6
2.2.2 Advantage and Disadvantage 6
2.3 3 foot Dish Tripod Stand 7
2.3.1 Material used 72.3.1 Advantage and Disadvantage 8
2.4 Orion Stand and Dish 8
2.4.1 Material used 9
2.4.2 Advantage and Disadvantage 9
2.5 Astro In market 10
2.5.1 Material used 10
2.5.2 Advantage and Disadvantage 11
2.6 Fabrication Planning Process 11
2.6.1 Joining (arc welding) 11
2.6.2 Cutting (Grinding machine) 12
2.6.3 Cutting (Hand grinder) 13
2.6.4 Drilling (Drilling machine) 14
2.6.5 Finishing (sand paper) 15
\
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
10/24
x
CHAPTER 3 METHODOLOGY PAGE
3.1 Introduction 17
3.2 Selected Material 17
3.2.1 Alluminium Hollow bar 18
3.2.2 Hollow Square bar 18
3.2.3 Long Bolt and U bolt 19
3.2.4 G clamp 203.3 Design Generation (Sketching) 20
3.3.1 Concept 1 21
3.3.2 Concept 2 22
3.3.3 Concept 3 23
3.3.4 Concept 4 24
3.4 Concept Screening 25
3.5 Finalize design 26
3.5.1 Solid work 26
3.5.2 Exploded View 27
3.5.3 Auto CAD and Dimension Project 27
3.6 Fabrication Process 28
3.6.1 Measuring 28
3.6.2 Cutting (hand grinder) 29
3.6.3 Drilling (drilling machine) 30
3.6.4 Joining (arc welding) 31
3.6.5 Grinding (Grinding machine) 32
3.6.6 Finishing (sand paper and spray) 33
3.7 Bill of Material 35
3.8 Product design specification 36
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
11/24
xi
CHAPTER 4 RESULT AND DISCUSSION PAGE
4.1 Introduction 37
4.2 Project Problems 37
4.2.1 Design concept 37
4.2.2 Material preparation for project 37
4.3 objective and problem statement 38
4.4 SPARS operation 37
4.5 Further research 38
4.6 Result 39
4.7 Expected Result 39
CHAPTER 5 CONCLUSIONS AND RECOMMENDATION PAGE
5.1 Conclusion 40
5.2 Recommendation 41
5.2.1 Modify the design 41
5.2.2 Add more function 41
5.2.3 Charge the material 41
5.3 Reference 42
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
12/24
xii
LIST OF TABLES
TABLE NO. TITLE PAGE
1 Gantt Chart 4
2 Grit Size for sand paper 16
3 Concept Screening 25
4 Bill of materials 35
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
13/24
xiii
LIST OF APPENDICES
APPENDIX TITLE PAGE
A Latter Research 43
B Dimension for Solid Work 44
C Simple Portable Astro Receiver Stand 45
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
14/24
xiv
LIST OF FIGURES
FIGURE NO TITLE PAGE
1.1 Flow chart 3
2.1 V-sat Antena-stand 5
2.2 3foot Oish Tripod Stand 7
2.3 Orion Stand and dish 8
2.4 Astro 9
2.5 Arc Welding 12
2.6 Grinding Machine 13
2.7 Hand grinder 13
2.8 Drilling Machine 14
2.9 Sand Paper 15
3.1 Alluminium Hollow bar 17
3.2 Hollow square bar 18
3.3 Long Bolt and U bolth 19
3.4 G-clamp 19
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
15/24
xv
3.5 Concept 1 21
3.6 Concept 2 22
3.7 Concept 3 23
3.8 Concept 4 24
3.9 Solid Work Drawing 26
3.10 Exploded View 27
3.11 Auto CAD and Dimention 27
3.12 Measuring 29
3.13 Hand Grinding(cutting) 30
3.14 Drillig process 31
3.15 Arc welding (joining) 32
3.16 Grinding process 32
3.17 Project before finishing 33
3.18 Process Finishing (sand paper) 34
3.19 Final Process (Spray) 34
3.20 After finishing process 35
4.1 Simple Portable Astro Receiver Stand (SPARS) 39
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
16/24
CHAPTER 1
INTRODUCTION
1.0 Introduction
For this chapter, It is about discussion of the problem background, problem
statement, objective of the project and lastly scope of the project
1.1 Project Background
ASTRO ALL ASIA NETWORKS plc (ASTRO) is Malaysias leading cross-
media group with significant presence in DTH (Direct-To-Home) TV services. Portable
astro receiver is a mobile transmitter path from one place to another. It can reduce the
human burden in their daily lives. This device is usually used by malaysian people,
where the astro provide facilities to its users, it also difficult to be removed, to be stored
and carried anywhere. This device have own advantages and disadvantages.
So this project is to fabricate simple portable Astro receiver stand, the existing
stand Astro not moveable and potable. So this project is about fabrication of simple
portable Astro receiver. This stand is lightweight and easy to set up. The system can be
field assembled by two people in few minutes. This astro stand also can be installed at
high or lower place.
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
17/24
2
1.2 PROBLEM STATEMENT
Most Malaysian usually subscribe Astro to watch television. However, most
Astro stand are difficult to carry and not portable.
1.3 OBJECTIVES
The main objectives of this project is to design and manufacture a simple
portable Astro receiver stand by using mechanical skills.
1.4 SCOPE
i. Can use at lower or hight place.ii. Can be used outside or inside the house.
iii. Easy to store and adjustable.iv. Provided with clamps.
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
18/24
3
1.5 FLOW CHART
A flow chart, or flow diagram, is a graphical representation of a process or
system that details the sequencing of steps required to create output.
Figure 1.1: Flow Chart
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
19/24
4
1.6 GANTT CHART
Table 1: Gantt chart
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
20/24
5
Chapter 2
LITERATURE REVIEW
2.1 INTRODUCTION
This section is about the literature review of the project. In this chapter, there is
a history and type of astro stand. Besides that, it is consists with the design which were
available at the market.
2.2 V-SAT ANTENNA STAND
Figure 2.1: Design 1 [1]
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
21/24
6
The weight of the V-SAT Antenna is approx. 2.5kg
The width of the leg span erected is approx. 1.18M
The height this stand is 100cm.
2.2.1 Materials used
a) Hollow bar (main body): Hollow bar used to make the main body. This part must be made from
hard material.
In addition, this matelrial has a property with light in weight.
2.2.2 Advantages and disadvantages
ADVANTAGE DISADVANTAGE
i. Low cost i. cannot adjustableii. Light weight ii. cannot set at different level
iii. Save surface iii. difficult to storeiv. Portable
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
22/24
7
2.3 3 FOOT DISH TRIPOD STAND
Figure 2.2: Design 2 [2]
The weight of the Tripod is approx. 1.5KG.
The width of the leg span erected is approx. 1.18M
The height of the centre pole when erected is 94cm.
The collapsed length of the Tripod is approx. 88cm and 13cm wide.
2.3.1 Materials used
a) Hollow bar (main body): Hollow bar used to make the main body. This part must be made from hard
material.
In addition, this matelrial has a property with light in weight
b) Rubber (holder) : rubber is suitable to serve as the holder because of the rough surface and can
prevent the hand from slipping.
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
23/24
8
2.3.2 Advantages and disadvantages
ADVANTAGE DISADVANTAGE
i. Low cost i. cannot adjustableii. Light weight ii. cannot set at different level
iii. Save surfaceiv. Portable
2.4 ORION STAND AND DISH
Figure 2.3: Orion stand and dish [3]
The weight of the Orion stand is approx. 3KG.
The width of the leg span erected is approx. 50cm
The height of this stand is 110cm.
-
8/2/2019 1. Abdul Aziz Safiee (CD 4915)
24/24
9
2.4.1 Materials used
a) Angle iron An angleiron is a flat metal rod that has been folded to a 90-degree angle
along its length, resulting in an L-shaped piece.
Usually the two sides of the angle are of equal length. Heavier angleiron isoften a structural element in buildings, bridges, and so on, while lighter
angleiron is used for a variety of supports.
An adjustable bed frame, for example, is made of angleiron.
b)
Zink referred to in nonscientific contexts as spelter, is a bluish-white, lustrous,
diamagnetic metal, though most common commercial grades of the metal
have a dull finish.
It is somewhat less dense than iron and has a hexagonal crystal structure.
c) Aluminium Aluminium is a silvery white and ductile member of the boron group of
chemical elements.
Aluminiumdurable, lightweight, malleable metal with appearance rangingfrom silvery to dull grey, depending on the surface roughness.
Aluminium is nonmagnetic and nonsparking.
2.4.2 Advantage and disadvantage
ADVANTAGE DISADVANTAGE
i. Low cost i. unstableii. Light weight ii. cannot set at different level
iii. Save surface iii. complicatediv. Portable