••

•

●

●●

●●●

●●

●

MODEL:SKY 110130

10FT X 16FT(3m x 4.8m)POP UP WITH FOLD SIDES

E T

4

Figure1

Figure 2

3.

4

8

1.

2.

step1:

PLEASE NOTE: If you want to put the folding sides down,

please fasten the leg and side tube together

with the help of velcro to avoid wind damage.

Open the canopy easy in four directions until partially

extended as in Fig simultaneously.

Hold the removable parts by hand and slide it to the

position of ball, the lock the four legs,see Figure 1.

Pull the inner pole downward,fix the legs of outer

pole at the four horizontal poles,see Figure 2.

Please keep the top canopy on top of the frame when following the steps.

Below pictures are scenograph for easy understanding.

ASSEMBLY INSTRUCTION PARTS LIST

Figure 3

Figure 4

Figure 5

step 2:1. Connect tube E with tubes D as shown in upon picture.

2. Insert the connected tubes into the side hole on fabric, do same on the other side,see Figure 3.

3. Hold the braces on canopy sides, insert plastic part into the holes on legs,

then insert the slider plastic to the hole to fix,see Figure 4.

step 3:1. Insert steal stake C into the hole on black plastic base, make it

fix on the ground, do same on other 3 legs,see Figure 5.

2. Make one end of the rope B tie with the plastic ring on canopy corner,

the other end tie with steel stake C, pull the ropes to suitable 4

directions, fix the steel stakes on the ground.

D E D