13 system iron galvanised
DESCRIPTION
Botnic Metalkraft Nig. LtdContact: Biodun JohnsonBlock C/5 Lagos State small scale Industrial EstateMatori, LagosNigeria(M) +234 (80) 56535338(M) +234 (80) 33278668(E ) [email protected](E ) [email protected]TRANSCRIPT
226NUOVI PRODOTTINEW PRODUCTS
by
SYSTEMA Iron® permette di creare con estrema semplicità qualsiasi tipo di ringhiera o recinzione con risultati di estrema eleganza e offrendo nel contempo una notevole varietà di soluzioni. Il Systema Iron unisce linee estetiche riconducibili alle più moderne realizzazioni in Inox alla duttilità di intervento, convenienza e solidità del ferro zincato. Uniche precauzioni necessarie nella lavorazione e applicazione della linea Systema Iron sono quelle normalmente usate nella posa di manufatti in ferro.
SYSTEMA Iron® allows you to very easily create any type of banister or fence with extremely elegant results. as well as a considerable range of solutions. “Systema Iron” combines aesthetic lines connected to the most modern stainless steel works with the ductility, convenience and solidity of galvanized Iron. While working and building with the Systema Iron line, you simply follow the same rules you apply with normal Iron works.
SYSTEMA IRON®
www.arteferro.com
SYSTEMA IRON® È REALIZZATO IN FERRO ZINCATO IN MODO TALE CHE POSSA ESSERE UTILIZZATO SENZA PROBLEMI IN AMBIENTE INTERNO ED
ESTERNO!
SYSTEMA IRON® IS GALVANIZED IRON THAT CAN BE USED WITHOUT COMPLICATIONS INTERNALLY
OR EXTERNALLY!
SU RICHIESTA SYSTEMA IRON® PUÒ ESSERE FORNITO SENZA ZINCATURA!
UPON REQUEST, SYSTEMA IRON CAN BE SUPPLIED WITHOUT GALVANIZATION!
SU RICHIESTA SYSTEMA IRON® PUÒ ESSERE FORNITO GIÀ VERNICIATO A POLVERE DEL COLORE DI CUI A
VETE BISOGNO!
ALSO UPON REQUEST, SYSTEMA IRON CAN BE SUPPLIED POWDER COATED IN YOUR COLOUR OF
CHOICE!
2by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Standard
ARTEFERRO 3
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
6
Ø100ØA
Ø 11
6
Ø 100
Ø 11
Ø A
6
100 x 100
Ø 11
Ø A
MØ A
100
Ø A
100
120
Iron Cod. art.Art. no.
DimensioniDimensions
Per tubo AFor tube
I0212 Ø 100 x 6 mm e 4 fori Ø 11 mm 3 15/16” dia. x 15/64” 4 holes 7/16” dia.
Ø 33,7 x 2,0 mm 1 1/3” dia x 5/64”
I0213 Ø 100 x 6 mm e 4 fori Ø 11 mm 3 15/16” dia. x 15/64” 4 holes 7/16” dia.
Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
DimensioniDimensions
Per tubo AFor tube
I403 Ø 100 x 6 mm e 3 fori Ø 11 mm 3 15/16” dia. x 15/64” 4 holes 7/16” dia.
Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
E014 ÷ E0142 da combinare con piastra di ancoraggio E015 ÷ E017E014 ÷ 0142 to be combined with anchorage flange E015 ÷ 017
E013 - E0131 da incementare E013 - E0131 to be cemented
Iron Cod. art.Art. no.
DimensioniDimensions
Per tubo AFor tube
I404 100 x 100 x 6 mm e 4 fori Ø 11 mm 3 15/16” sq. x 15/64” 4 holes 7/16” dia.
Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
ALUMINIUM Cod. art.Art. no.
Dimensioni ADimensions
Per tubo For tube
E0131 Ø 29,3 mm1 5/32” dia.
Ø 33,7 x 2,0 mm1 1/3” dia. x 5/64”
E013 Ø 38,0 mm1 1/2” dia.
Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
I0184I0184316
I001E0011
CementoConcrete
CementoConcrete
Art. E016Art. E017
I001I0011I0012 ALUMINIUM Cod. art.
Art. no.DimensioniDimensions
Per tubo AFor tube
E0141 Ø 29,3 mm foro cieco M8 1 5/32” dia. blind hole M8
Ø 33,7 x 2,0 mm1 2/3” dia. x 5/64”
E014 Ø 38,0 mm foro cieco M8 1 1/2” dia. blind hole M8
Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
E0142 Ø 44 mm - foro cieco M121 47/64” dia. blind hole M12
Ø 48,3 x 2,0 mm1 7/8” dia. x 5/64”
4by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Set composto da: piastra pavimento, tubo attacco viti Complete with hexagonal socket set screws with cone point
Elementi di Ancoraggio - Anchorage Element
Elemento di Sostegno per Tubo - Support for Anchor Tubes
Elemento di Ancoraggio da Cemento - Concrete Anchor
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Ancoraggi Laterali ad Angoli - Corner Lateral Anchors
8680 6
Ø A
100
8680 6
73.5
73.5
6
Ø11
Ø11
100
Ø A
B
B73.5
73.5
6
Ø 11
Ø 1
1
B
B
NEW
Iron Cod. art.Art. no.
Per tubo AFor tube B
I1113 Ø 33,7 x 2,0 mm1 1/3” dia x 5/64”
52 mm 2 3/64”
I1114 Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
56 mm 2 3/16”
Iron Cod. art.Art. no.
Per tubo AFor tube B
I1111 Ø 33,7 x 2,0 mm1 1/3” dia x 5/64”
52 mm 2 3/64”
I1112 Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
56 mm 2 3/16”
NEW
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
5ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
65
65
6
Ø A
75
Ø 100
Ø 11
M8
35
100
125
100
Ø A
Ø 11
Ancoraggi Laterali - Lateral Anchorages
NEW
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Set composto da piastra, 2 viti M8 x 70 mm, 2 distanziatori Ø 26,9 x 48 mm Complete with 2 screws M8 x 2 3/4” mm, 2 spacers 1 1/16” dia. x 1 57/64”
Set composto da: piastra, distanziale e piastrina tubo Complete with flange, spacers and tube plate
Iron Cod. art.Art. no.
DimensioniDimensions
Per tubo AFor tube
I400 Ø 100 x 6 mm 3 15/16” dia. x 15/64”
Ø 42,4 mm 1 2/3” dia.
Iron Cod. art.Art. no.
Per tubo AFor tube
DiscoDisc
I111 Ø 42,4 x 2,0 mm 1 2/3” dia. x 5/64”
Ø 125 x 8 mm 4 59/64” dia. x 5/16”
I113 Ø 42,4 x 2,0 mm 1 2/3” dia. x 5/64”
Ø 100 x 6 mm3 15/16” dia. x 15/64”
I113/337 Ø 33,7 x 2,0 mm 1 1/3” dia x 5/64”
Ø 100 x 6 mm3 15/16” dia. x 15/64”
6 ARTEFERRO
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
7www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
60 Ø A
B
Ø 1
1
165
Ø A
B
M8
Ø A
B
Ø 1
1
Ø A
8
Flangia di Ancoraggio (Alluminio) - Anchor Flange (Aluminium)
Iron Cod. art.Art. no.
Per tubo AFor tube B
I11310 Ø 33,7 x 2,0 mm1 1/3” dia x 5/64”
55 mm 2 11/64”
I11320 Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
60 mm 2 23/64”
Iron Cod. art.Art. no.
Per tubo AFor tube B
I11410 Ø 33,7 x 2,0 mm1 1/3” dia x 5/64”
58 mm 2 9/32”
I11420 Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
63 mm 2 31/64”
Iron Cod. art.Art. no.
Per tubo AFor tube B
I11510 Ø 33,7 x 2,0 mm1 1/3” dia x 5/64”
62 mm2 7/16”
I11520 Ø 42,4 x 2,0 mm 1 2/3” dia x 5/64”
67 mm 2 41/64”
Ancoraggi Laterali - Lateral Anchorages
In alluminio, spessore 8 mm e foro centrale Ø 11 mmIn aluminium, thk. 5/16” and central hole 7/16” dia.
ALUMINIUM Cod. art.Art. no.
Dimensioni ADimensions
Foro interno Internal hole
Fori esterni External holes
E015 Ø 55 mm 2 11/64” dia.
Ø 11 mm 5/16” dia.
3 x Ø 6 mm 3 x 15/64” dia.
E016 Ø 75 mm 2 61/64” dia.
Ø 11 mm 5/16” dia.
4 x Ø 6 mm 4 x 15/64” dia.
E017 Ø 95 mm 3 47/64” dia.
Ø 11 mm 5/16” dia.
4 x Ø 6 mm 4 x 15/64” dia.
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Dischi e Flange Piatti - Flat Discs and Flanges
Ø A
6
Ø A
66
Ø A
Ø A
6
Ø A
6
Ø A
6
Iron Cod. art.Art. no.
Dimensioni Dimensions
I064 Ø 80 x 4 mm 3 5/32” dia. x 5/32”
I065 Ø 100 x 4 mm 3 15/16” dia. x 5/32”
Iron Cod. art.Art. no.
Dimensioni ADimensions
I0681 Ø 80 x 6 mm 3 5/32” dia. x 15/64”
I0682 Ø 100 x 6 mm 3 15/16” dia. x 15/64”
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0690 Ø 70 x 6 mm 2 3/4” dia.x 15/64”
2 x Ø 9 mm 2 x 23/64” dia.
Ø 10,5 mm 27/64” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0690/D Ø 70 x 6 mm 2 3/4” dia.x 15/64”
2 x Ø 9 mm 2 x 23/64” dia.
Ø 10,5 mm 27/64” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0695 Ø 70 x 6 mm 2 3/4” dia.x 15/64”
3 x Ø 9 mm 3 x 23/64” dia.
Ø 10,5 mm 27/64” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0695/D Ø 70 x 6 mm 2 3/4” dia.x 15/64”
3 x Ø 9 mm 3 x 23/64” dia.
Ø 10,5 mm 27/64” dia.
Fori con svasi e perimetro bisellatoCountersunk holes and chamfered perimeter
Fori con svasi e perimetro bisellatoCountersunk holes and chamfered perimeter
NEW
NEW
NEW
NEW
NEW
NEW
8by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Dischi Bombati - Rounded Convex Discs
6
Ø A
Ø A
Ø A
5
Dischi e Flange Piatti - Flat Discs and Flanges
6
Ø A
Ø A
6
Ø A
6
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0691 Ø 100 x 6 mm 3 15/16” dia. x 15/64”
2 x Ø 9 mm 2 x 23/64”dia.
Ø 43 mm 1 11/16” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
Foro centrale Central hole
Fori esterni External holes
I0631/5 Ø 70 x 5 mm 2 3/4” dia. x 13/64”
Ø 10,5 mm 27/64” dia.
I0690/5 Ø 70 x 5 mm 2 3/4” dia. x 13/64”
Ø 10,5 mm 27/64” dia.
2 x Ø 6,5 mm 2 x 17/64” dia.
I0695/5 Ø 70 x 5 mm 2 3/4” dia. x 13/64”
Ø 10,5 mm 27/64” dia.
3 x Ø 6,5 mm 3 x 17/64” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0691/D Ø 100 x 6 mm 3 15/16” dia. x 15/64”
2 x Ø 9 mm 2 x 23/64”dia.
Ø 43 mm 1 11/16” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0696 Ø 100 x 6 mm 3 15/16” dia. x 15/64”
3 x Ø 9 mm 3 x 23/64” dia.
Ø 43 mm 1 11/16” dia.
I06961 Ø 100 x 6 mm 3 15/16” dia. x 15/64”
3 x Ø 9 mm 3 x 23/64” dia.
Ø 34,5 mm 1 23/64” dia.
I0697 Ø 120 x 6 mm 4 23/32” dia. x 15/64”
3 x Ø 11 mm 3 x 7/16” dia.
Ø 49 mm 1 15/16” dia.
I0698 Ø 120 x 6 mm 4 23/32” dia. x 15/64”
3 x Ø 11 mm 3 x 7/16” dia.
Ø 43 mm 1 11/16” dia.
I0699 Ø 140 x 6 mm 5 33/64” dia. x 15/64”
3 x Ø 11 mm 3 x 7/16” dia.
Ø 49 mm 1 15/16” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
Fori esterni External holes
Foro centrale Central hole
I0696/D Ø 100 x 6 mm 3 15/16” dia. x 15/64”
3 x Ø 9 mm 3 x 23/64” dia.
Ø 43 mm 1 11/16” dia.
I06961/D Ø 100 x 6 mm 3 15/16” dia. x 15/64”
3 x Ø 9 mm 3 x 23/64” dia.
Ø 34,5 mm 1 23/64” dia.
Iron Cod. art.Art. no.
Dimensioni ADimensions
I050 Ø 33,7 mm - 1 1/3” dia.
I051 Ø 42,4 mm - 1 2/3” dia.
I052 Ø 48,3 mm - 1 7/8” dia.
I053 Ø 60,3 mm - 2 3/8” dia.
I054 Ø 76,1 mm - 3” dia.
Fori con svasi e perimetro bisellatoCountersunk holes and chamfered perimeter
Fori con svasi e perimetro bisellatoCountersunk holes and chamfered perimeter
Flange Bombate - Rounded Convex Flanges
NEW
NEW
NEW
NEW
NEW
NEW
9www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Ø A
Ø F
H
Ø A
Ø F
H
Copriflange - Flange Canopies
33
41
Ø 105
H
F
Ø 105
H
Ø F
Ø A
H
Ø A
Ø F
H
Copriflange - Flange Canopies
Copriflangia per Ancoraggio Montante a Piatti - Flange Canopy for Flat-Bar Newel Post
Iron Cod. art.Art. no.
Dimensioni ADimensions
Foro F
HoleAltezza
HHeight
I0181 Ø 62 mm - 2 7/16” dia. Ø 12,5 mm - 1/2” dia. 15 mm - 19/32”
I0182 Ø 76 mm - 2 63/64” dia. Ø 12,5 mm - 1/2” dia. 12 mm - 1/2”
Iron Cod. art.Art. no.
Dimensioni ADimensions
Foro F
HoleAltezza
HHeight
I019 Ø 85 mm - 3 15/64” dia. Ø 43,0 mm - 1 11/16” dia. 15 mm - 19/32”
I0191 Ø 85 mm - 3 15/64” dia. Ø 34,5 mm - 1 23/64” dia. 15 mm - 19/32”
I0192 Ø 85 mm - 3 15/64” dia. Ø 41,0 mm - 1 39/64” dia. 15 mm - 19/32”
I020 Ø 105 mm - 4 9/64” dia. Ø 43,0 mm - 1 11/16” dia. 15 mm - 19/32”
I020/C Ø 105 mm - 4 9/64” dia. Ø 43,0 mm - 1 11/16” dia. 25 mm - 63/64”
I0202 Ø 105 mm - 4 9/64” dia. Ø 34,5 mm - 1 23/64” dia. 25 mm - 63/64”
I0203 Ø 129 mm - 5 5/64” dia. Ø 43,0 mm - 1 11/16” dia. 25 mm - 63/64”
Iron Cod. art.Art. no.
Dimensioni ADimensions
Foro F
HoleAltezza
HHeight
I0205 Ø 105 mm - 4 9/64” dia. 33 x 41 mm - 1 19/64” x 1 39/64” 15 mm - 19/32”
Iron Cod. art.Art. no.
Dimensioni ADimensions
Foro F
HoleAltezza
HHeight
I02051 Ø 105 mm - 4 9/64” dia. 41 x 41 mm - 1 39/64” x 1 39/64” 15 mm - 19/32”
Iron Cod. art.Art. no.
Dimensioni ADimensions
Foro F
HoleAltezza
HHeight
I02061 Ø 85 mm - 3 15/64” dia. Ø 34,5 mm - 1 23/64” dia. 25 mm - 63/64”
I02062 Ø 85 mm - 3 15/64” dia. Ø 43,0 mm - 1 11/16” dia. 25 mm - 63/64”
I02063 Ø 105 mm - 4 9/64” dia. Ø 34,5 mm - 1 23/64” dia. 25 mm - 63/64”
I02064 Ø 105 mm - 4 9/64” dia. Ø 43,0 mm - 1 11/16” dia. 25 mm - 63/64”
Iron Cod. art.Art. no.
Dimensioni ADimensions
Foro F
HoleAltezza
HHeight
I02065 Ø 85 mm - 3 15/64” dia. Ø 34,5 mm - 1 23/64” dia. 38 mm - 1 1/2”
I02066 Ø 85 mm - 3 15/64” dia. Ø 43,0 mm - 1 11/16” dia. 38 mm - 1 1/2”
I02067 Ø 105 mm - 4 9/64” dia. Ø 34,5 mm - 1 23/64” dia. 48 mm - 1 57/64”
I02068 Ø 105 mm - 4 9/64” dia. Ø 43,0 mm - 1 11/16” dia. 48 mm - 1 57/64”
NEW
NEW
NEWNEW
NEW
NEW
NEW
NEW
10by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Supporti Tondino - Round Bar Holders
Ø B
22
Ø A
Ø A
30.5
20.5
Ø B
Ø 2
2Composto in 2 pezzi con vite a grano Two pieces, complete with set screws
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
DescrizioneDescription
I006 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 12,2 mm 1/2” dia.
Passante Through
I0061 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 12,2 mm 1/2” dia.
Cieco - sxBlind - L
I0062 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 12,2 mm 1/2” dia.
Cieco - dxBlind - R
I00666 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 12,2 mm 1/2” dia.
Passante - ThroughSolo per tubo quadroOnly for square tube
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
DescrizioneDescription
I0063 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 10,2 mm13/32” dia.
Passante Through
I0064 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 10,2 mm13/32” dia.
Cieco - sxBlind - L
I0065 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 10,2 mm13/32” dia.
Cieco - dxBlind - R
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
I0069 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm passante - 1/2” dia. through
I0069100 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm cieco destro - 1/2” dia. blind right
I006922 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm cieco sinistro - 1/2” dia. blind left
I00692 Quadro - Square Ø 12,2 mm passante - 1/2” dia. through
I006910 Ø 42,4 mm - 1 2/3” dia. Ø 10,2 mm passante - 13/32” dia. through
I0069101 Ø 33,7 mm - 1 1/3” dia. Ø 10,2 mm passante - 13/32” dia. through
I006911 Ø 33,7 mm - 1 1/3” dia. Ø 12,2 mm passante - 1/2” dia. through
Ø B
Ø A
32
60°
Ø 25
60°
Ø 19
NEW
NEW
foro filettato per granithreaded hole for setscrew
vite a testa svasata M5 o M6countersunk flat head screw M5 or M6
praticare fori su tubo e filettarli da M5 o M6drill holes on tube and drive thread of M5 or M6
N.B. L’art. I006 è composto da 1 + 2 . La vite viene fornita a parte. I grani filettati sono già avvitati nell’art. I006A
rt. I
0050
Art. E001
1 2
Attention: art. I006 is compo-sed by parts 1 + 2. The screw is supplied separately. The set screws are prescrewed on art. I006.
Composto da 2 pezzi e grani per il fermo del tondinoComplete with 2 pieces and threaded lock for rod
NEW
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
11ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Supporti Tondino - Round Bar Holders
Ø B
50.5
Ø A
Ø 2
2
Ø A
20.5
Ø B
Ø 2
2
Ø A
Ø B
20.5
Ø 2
2
24.547.5
Ø A Ø B
Ø 2
4.5
Ø B
25
Ø A
Ø A
Ø B
20
Ø 2
0
Composto in 2 pezzi completo di grani filettatiTwo components, complete with set screws
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
I006931 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm - 1/2” dia.
I006934 Superficie piana Flat face
Ø 12,2 mm - 1/2” dia.
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
I00698100 Ø 33,7 mm - 1 1/3” dia. Ø 10,2 mm - 13/32” dia.
I00698200 Ø 33,7 mm - 1 1/3” dia. Ø 12,2 mm - 1/2” dia.
I00698300 Ø 42,4 mm - 1 2/3” dia. Ø 10,2 mm - 13/32” dia.
I00698400 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm - 1/2” dia.
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
I00691100 Ø 33,7 mm - 1 1/3” dia. Ø 10,2 mm - 13/32” dia.
I00691200 Ø 33,7 mm - 1 1/3” dia. Ø 12,2 mm - 1/2” dia.
I00691300 Ø 42,4 mm - 1 2/3” dia. Ø 10,2 mm - 13/32” dia.
I00691400 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm - 1/2” dia.
Iron Cod. art.Art. no.
Foro A
HoleForo
BHole
I006965 Ø 12,2 - 1/2” dia. Ø 10,2 mm - 13/32” dia.
I006966 Ø 12,2 - 1/2” dia. Ø 12,2 mm - 1/2” dia.
I006976 Ø 14,2 - 9/16” dia. Ø 12,2 mm - 1/2” dia.
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
I00697100 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 10,2 mm13/32” dia.
I00697200 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Ø 12,2 mm1/2” dia.
Iron Cod. art.Art. no.
Per tubo A
For tubeForo
BHole
I00696100 Ø 33,7 mm - 1 1/3” dia. Ø 10,2 mm - 13/32” dia.
I00696200 Ø 33,7 mm - 1 1/3” dia. Ø 12,2 mm - 1/2” dia.
I00696300 Ø 42,4 mm - 1 2/3” dia. Ø 10,2 mm - 13/32” dia.
I00696400 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm - 1/2” dia.
NEW
NEW
NEW
NEW
NEW
NEW
12by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Supporti Tondino - Round Bar HoldersCompleto di grano
One piece, complete with set screws
1630
M6
14
Ø A
Ø16
Rigido a due componenti, completo di grani filettati, per piattiTwo components, complete with set screws, for mounting between flat bars
A due componenti, completo di grani filettatiTwo components, complete with set screws
Ø A
35
Ø B
19
35
19
Ø 2
7
Ø B
Ø 2
2
16.526.535
30
Ø A
61.5
16
Iron Cod. art.Art. no.
Foro A
Hole
I00620 Ø 10,2 mm 13/32” dia.
I00621 Ø 8,2 mm 21/64” dia.
Iron Cod. art.Art. no.
Per tubo A
For tubeTondino
BRound bar
I40650 Ø 42,4 mm 1 2/3” dia.
Ø 12,2 mm 1/2” dia.
Iron Cod. art.Art. no.
Per tubo A
For tubeTondino
BRound bar
I00654 Superficie piana Flat face
Ø 10,2 mm 13/32” dia.
I00651 Superficie piana Flat face
Ø 12,2 mm 1/2” dia.
Iron Cod. art.Art. no.
Foro A
Hole
I00600 Ø 12,2 mm 1/2” dia.
NEW
NEW
NEW
NEW
13www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
14 ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
15www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Supporti Tondino - Round Bar Holders
dritto - straight Utilizzabile per 90°Can be used at 90°
Ø BØ A
25
Regolabile - Adjustable
Ø A
Ø B
Ø A
58
Ø A
15 15
Giunzione snodata per tondino - Pivotable Round Bar Connector
Regolabile - Adjustable
23 2374
Ø A
Regolabile - Adjustable
Ø A
Ø A
Ø B
30
M6
Supporto Snodato per Tondino - Pivotable Round Bar Connector
Snodato, completo di grani- Pivotable, complete with set screws
Regolabile - Adjustable
Iron Cod. art.Art. no.
Per tubo A
For tubeTondino
BRound bar
a°
I0069991 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm - 1/2” dia. 22-33
I0069997 Ø 33,7 mm - 1 1/3” dia. Ø 12,2 mm - 1/2” dia. 22-33
Iron Cod. art.Art. no.
Per tubo A
For tubeTondino
BRound bar
I006999 Ø 42,4 mm - 1 2/3” dia. Ø 12,2 mm - 1/2” dia.
I0069996 Ø 33,7 mm - 1 1/3” dia. Ø 12,2 mm - 1/2” dia.
Iron Cod. art.Art. no.
Per tubo A
For tubeTondino
BRound bar
I0074 Ø 42,4 mm - 1 2/3” dia. Ø 12 mm - 1/2” dia.
I0073 Ø 42,4 mm - 1 2/3” dia. Ø 10 mm - 13/32” dia.
I0076 Ø 33,7 mm - 1 1/3” dia. Ø 12 mm - 1/2” dia.
I0078 Ø 33,7 mm - 1 1/3” dia. Ø 10 mm - 13/32” dia.
I00791 Superficie piana - Flat face Ø 12 mm - 1/2” dia.
I00792 Superficie piana - Flat face Ø 10 mm - 13/32” dia.
Iron Cod. art.Art. no.
Tondino A
Round bar
I0070 Ø 12 mm - 1/2” dia.
I0072 Ø 10 mm - 13/32” dia.
Iron Cod. art.Art. no.
Tondino A
Round bar
I0170 Ø 12 mm - 1/2” dia.
I0172 Ø 10 mm - 13/32” dia.
Iron Cod. art.Art. no.
Tondino A
Round bar
I00700 Ø 10 mm - 13/32” dia.
I00710 Ø 12 mm - 1/2” dia.
Facilmente modellabileEasy to model
Completo di vite speciale M6 e grani filettati Complete with special M6 screw and set screws
Giunzione snodata per tondiniPivotable round bar connector
Giunzione Piegabile per Tondino - Bendable Round Bar Connector
NEW
NEW
NEW
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Reggicorrimano da Parete - Wall Handrail Supports
6 7379
Ø70
Ø12
69
46
6
Ø 7
0
M6
Ø 12
46
6773
69
6
Ø 7
0
46
M8
6910
73Ø 12
64
Ø 42.4
93
Ø 7
0
4211 11
46
Ø 12
Ø 6.5
73
6
Ø 42.4
93
Ø70
6
Ø12
64
4211 11
46
Ø 6.5
73
3 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 3 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia..
2 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 2 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia..
2 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 2 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
3 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 3 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
2 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 2 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
Iron Cod. art.Art. no.
DescrizioneDescription
I0222 Senza filettoWithout thread
Iron Cod. art.Art. no.
DescrizioneDescription
I0224 Con filetto interno M6With internal thread M6
Iron Cod. art.Art. no.
DescrizioneDescription
I02241 Con filetto maschio M8With external thread M8
Iron Cod. art.Art. no.
DescrizioneDescription
I0223 Completo di piastra di ancoraggio e piastra di collegamentoComplete with rigid mounting plate
Iron Cod. art.Art. no.
DescrizioneDescription
I02231 Snodato completo di piastra di ancoraggio e piastra di collegamentoPivotable complete with rigid and mounting plate
NEW
NEW
NEW
16by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Reggicorrimano da Parete - Wall Handrail Supports
17www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
2 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 2 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
Con piastra bombata Ø 70 x 6 mm, supporto corrimano 75 x 75 mm, Ø 12 mm Complete with rounded flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
2 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 2 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
2 pezzi, piastra di ancoraggio Ø 70 x 6 mm angolare 75 x 75 mm, tondino Ø 12 mm 2 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
Iron Cod. art.Art. no.
DescrizioneDescription
I02245 Senza filettoWithout thread
Iron Cod. art.Art. no.
DescrizioneDescription
I02243 Con filetto interno M6With internal thread M6
Iron Cod. art.Art. no.
DescrizioneDescription
I02244 Con filetto maschio M8With external thread M8
Iron Cod. art.Art. no.
DescrizioneDescription
I02242 Completo di vite e con filetto interno M6 With screw and internal thread M6
6
Ø70
69
M6
Ø12
73
46
6
Ø 7
0
Ø12
46
M8
73
7510
6
Ø70
M6
Ø12
73
69
6
Ø 7
0
Ø 12
46
73
75
NEW
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
83.5
86.7
ØA
120°
120°
8
E015 E018
Ø63
Ø6.
5
Ø20
Ø 40
Iron Cod. art.Art. no.
Per tubo A
For tube
I022/S Ø 42,4 mm 1 2/3” dia.
Reggicorrimano da Parete - Wall Handrail Supports
4 pezzi, completo di viti con piastra di ancoraggio in alluminio, rosetta e piastra di collegamento a tubo4 pieces complete with aluminium flange, flange canopy and mounting plate
NEW
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.comARTEFERRO18
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Reggicorrimano da Parete - Wall Handrail Supports
4 pezzi, completo di viti e piastra di collegamento a tubo. Per fissaggio a vetro4 pieces complete with glass clip and mounting plate. For glass
4 pezzi, completo di viti e piastra di collegamento a tubo. Per fissaggio a vetro4 pieces complete with glass clip and mounting plate. For glass
40 82
66
65
Ø 4
4
S
Ø21
Ø 20
77
Ø 4
4
Ø 2
0
80
90S
Ø 12
Ø 2
1
Reggicorrimano per Vetro - Glass Handrail Supports
Iron Cod. art.Art. no.
DescrizioneDescription
I034100 66 x 82 mm2 5/8” x 3 15/64”
Iron Cod. art.Art. no.
Descrizione S
Description
I022/S1 Per vetro 8-25 mm Vetro da forare Ø 21 mmFor glass thk. 5/16” - 1” Glass to be drilled at 55/64” dia.
Iron Cod. art.Art. no.
Descrizione S
Description
I022/S2 Per vetro 8-25 mm Vetro da forare Ø 21 mmFor glass thk. 5/16” - 1” Glass to be drilled at 55/64” dia.
NEW
NEW
19www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Ø A
Ø 12H10
.5
Ø A
Ø 12H10
.5
64.527
4264
Ø 6.5
ØA
11 11
H
70
Ø12
ØA
42
Ø 6.5
Ø A
11 11
70
Ø 12
H
Ø A
4 pezzi completo di viti e terminale per tubo4 pieces complete with screws and end cap for tube
Reggicorrimano - Handrail Supports
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I0301 75 mm2 61/64”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I030/S 75 mm 2 61/64”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I0311 75 mm2 61/64”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I031/S1 75 mm 2 61/64”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I038000 124 mm4 7/8”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I038100 124 mm4 7/8”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I038200 109 mm4 9/32”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I038300 109 mm4 9/32”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
3 pezzi completo di tappo e terminale per tubo3 pieces complete with screw and end cap for tube
NEW
NEW
20by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
21www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Ø A
90
Ø A
Ø 15
Ø A
Ø 12
11 42 1164
Ø 6.5
H
Ø A
ØA
Ø 12
11 42 1164
Ø 6.5
H
Ø A
Ø A
77
H
Ø A
42Ø 6.5
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I038400 90 mm3 9/16”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I038500 90 mm3 9/16”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I039000 88 mm3 15/32”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I039100 88 mm3 15/32”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I039200 88 mm3 15/32”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I039300 88 mm3 15/32”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I038800 77 mm 3 15/32”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I038900 77,07 mm 3 15/32”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Reggicorrimano - Handrail Supports
NEW
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
22by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Ø A
Ø 12
11 42 1164
Ø 6.5
H
Ø A
Ø 12
H
11 42 11
64
Ø 6.5
Ø A
Ø A
Reggicorrimano - Handrail Supports
64
Ø A 4211 11
Ø 12
Ø 6.5
Ø A
H15
64
Ø A 42
Ø 12
Ø A
H15
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I039400 76 mm2 63/64”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I039500 76 mm2 63/64”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I039600 76 mm2 63/64”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I039700 76 mm2 63/64”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I039800 92 mm3 5/8”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I039900 92 mm3 5/8”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I040000 92 mm3 5/8”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I040100 92 mm3 5/8”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
4 pezzi completo di viti e terminale per tubo4 pieces complete with screws and end cap for tube
3 pezzi completo di viti e terminale per tubo3 pieces complete with screws and end cap for tube
4 pezzi completo di viti e terminale per tubo4 pieces complete with screws and end cap for tube
3 pezzi completo di viti e terminale per tubo3 pieces complete with screws and end cap for tube
NEW
NEW
NEW
NEW
23ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
24by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
3 pezzi completo di vite e terminale per tubo3 pieces complete with screw and end cap for tube
Ø A
C
Ø B
27 64
2 pezzi completo di terminale per tubo2 pieces complete with end cap for tube
Ø A
C
Ø B
27 64
12
H
Ø A
Ø A
4211 1164
Ø 6.5
H
Ø A
Iron Cod. art.Art. no.
Per tubo A
For tubeB C
I0104 Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
Ø 20 mm3/4” dia.
58 mm2 9/32”
I0105 Ø 33,7 x 2,0 mm1 1/3” dia. x 5/64”
Ø 14 mm9/16” dia.
48 mm1 57/64”
Iron Cod. art.Art. no.
Per tubo A
For tubeB C
I0102 Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
Ø 20 mm3/4” dia.
58 mm2 9/32”
I0103 Ø 33,7 x 2,0 mm1 1/3” dia. x 5/64”
Ø 14 mm9/16” dia.
48 mm1 57/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I040200 74 mm2 15/16”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I040300 74 mm2 15/16”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I040400 74 mm2 15/16”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I040500 74 mm2 15/16”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Ø A
4211 11
Ø 6.5
64
3 pezzi completo di vite e terminale per tubo3 pieces complete with screw and end cap for tube
2 pezzi completo di terminale per tubo2 pieces complete with end cap for tube
Reggicorrimano - Handrail Supports
NEW
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
25www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Ø A
H
4211 1164
Ø 6.5
Ø A
Ø A
4211 1164
Ø 6.5H
Ø A
Ø A
4211 1164
Ø 6.5
Ø A
H
Ø A
H
4211 11
64
Ø 6.5
Ø A
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I041000 74 mm2 15/16”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I041100 74 mm2 15/16”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I041200 74 mm2 15/16”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I041300 74 mm2 15/16”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I040600 74 mm2 15/16”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I040700 74 mm2 15/16”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I040800 74 mm2 15/16”
Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
I040900 74 mm2 15/16”
Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
Reggicorrimano - Handrail Supports
3 pezzi completo di vite e terminale per tubo3 pieces complete with screw and end cap for tube
2 pezzi completo di terminale per tubo2 pieces complete with end cap for tube
3 pezzi completo di vite e terminale per tubo3 pieces complete with screw and end cap for tube
2 pezzi completo di terminale per tubo2 pieces complete with end cap for tube
NEW
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
26by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Supporto regolabile in altezza per tubiAdjustable in height, for tubes
Reggicorrimano - Handrail Supports
Grano filettato Threaded pins
1013
23
179Ø 12
M 5
Ø A
Ø A
Per fissaggio laterale, completo di grani e attacco per tubo Ø 42,4 mm con possibilità di regolazione in altezzaFor lateral fastening, rigid complete with set screws, for tube 1 2/3” dia., adjustable in height
50.5
125
Ø A
Ø 33.7 - 42.4
Ø 12H
64.527
M 8
10
Ø 12
H
M 8
10
27 64.5
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I041400 68 mm2 5/8”
Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Iron Cod. art.Art. no.
Per tubo A
For tube
I4582/424 Ø 42,4 x 2,0 mm 1 2/3”dia. x 5/64”
I4582/337 Ø 33,7 x 2,0 mm 1 1/3”dia. x 5/64”
Iron Cod. art.Art. no.
Dimensioni Dimensions
Per tuboFor tube
I0225 Ø 12 x 125 mm1/2” dia. x 4 59/64”
Ø 33,7 - 42,4 mm1 1/3” - 1 2/3” dia.
I0226 Ø 14 x 125 mm9/16”dia. x 4 59/64”
Ø 33,7 - 42,4 mm1 1/3” - 1 2/3” dia.
Iron Cod. art.Art. no.
Altezza H
Height
Per tubo A
For tube
I041500 68 mm2 5/8”
Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
Elementi Reggicorrimano - Handrail Support Elements
NEW
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Piastre Sella - Mounting Plates
Piastre Sella 45° - Mounting Plates 45°
Piastre Sella 90° - Mounting Plates 90°
42
25
Ø 8.5
Ø 6
.5
64
Ø A
4
6425
21 21
4
90°
Ø 6.5
Ø 8.5
Iron Cod. art.Art. no.
Per tubo A
For tube
I01197 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
I011972 Ø 48,3 - Ø 60,3 mm1 7/8” dia. - 2 3/8” dia.
Iron Cod. art.Art. no.
Per tubo A
For tube
I011976 Superficie piana - Flat face
Iron Cod. art.Art. no.
Per tubo A
For tube
I011974 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
I011975 Ø 48,3 - Ø 60,3 mm1 7/8” dia. - 2 3/8” dia.
Iron Cod. art.Art. no.
Per tubo A
For tube
I011971 Ø 33,7 - Ø 42,4 mm1 1/3” dia. - 1 2/3” dia.
I011973 Ø 48,3 - Ø 60,3 mm1 7/8” dia. - 2 3/8” dia.
Spessore 4 mmThk. 5/32”
Spessore 4 mmThk. 5/32”
Spessore 4 mmThk. 5/32”
27Ø
6.5
21
Ø 8
.5
45°
NEW
NEW
27www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
NEW
28by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Giunzione per corrimano disassato, con filetti interni M8 e M6Connector for handrail out of axis, with internal threads M8 and M6
M 8
Ø A
B
Giunzioni - Connectors
B
Ø A
M 8
B
Ø A
69
69
M 6
M 8
Ø 12
69
69
M 6
Ø 1
2
ÿ 20
M 8
M 6
R20
32
Ø
69
69
M 6
M 6
Snodato con filetto esterno M8 e filetto interno M6Pivotable with external thread M8 and internal thread M6
Rigido con filetto esterno M8 e filetto interno M6Fixed with external thread M8 and internal thread M6
Con filetto interno M6 su un latoWith one internal thread M6
Misura 75 x 75 mm Ø 12 mm, grezzo, senza vite Dim. 2 61/64” x 2 61/64”, 1/2” dia. raw, without screw
Iron Cod. art.Art. no.
Descrizione A x B
DescriptionSnodatoPivotable
I011931 Ø 12 x 65 mm - 1/2” dia. x 2 9/16” Si - Yes
I01193 Ø 14 x 65 mm - 9/16” dia. x 2 9/16” Si - Yes
Iron Cod. art.Art. no.
DescrizioneDescription
I011946 Con filetto interno M6 e filetto esterno M8With internal thread M6 and external thread M8
Iron Cod. art.Art. no.
Descrizione A x B
Description
I011941 Ø 12 x 65 mm - 1/2” dia. x 2 9/16”
I01194 Ø 14 x 65 mm - 9/16” dia. x 2 9/16”
I011943 Ø 12 x 125 mm - 1/2” dia. x 4 59/64”
I011944 Ø 14 x 125 mm - 9/16” dia. x 4 59/64”
Iron Cod. art.Art. no.
Dimensioni A x B
Dimensions
I011945 Ø 12 x 80 mm - 1/2” dia. x 3 5/32”
I0119451 Ø 14 x 80 mm - 9/16” dia. x 3 5/32”
I011940 Ø 12 x 115 mm - testa arrotondata - 1/2” dia. x 4 17/32” - rounded head
I0119441 Ø 14 x 115 mm - testa arrotondata - 9/16” dia. x 4 17/32” - rounded head
Iron Cod. art.Art. no.
DescrizioneDescription
I011947 Con 1 filetto interno M6 - With 1 internal thread M6
Iron Cod. art.Art. no.
DescrizioneDescription
I011948 Con filetti interni M6 - With internal threads M6
Iron Cod. art.Art. no.
DescrizioneDescription
I01192 90 x 75 mm - 3 9/16” x 2 21/64”
NEW
29ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
B
Ø A
B
B
B
Ø A
Ø A
B
B
Ø A
B
BB
C
Ø A
Connettori per Tubo in ZAMAC - ZAMAC Tube Connectors
Curva 90° grezza90° elbow raw
90° ad angolo grezza 90° angle raw
Angolo 45°, grezza 45° angle, raw
Raccordo a “T” grezzo3-Way flush “T”, raw
Giunzione snodata grezzaPivotable connector, raw
In ottone con fenditura In brass with collar
Giunture in tubo di ottone - Connector
OTTONE Cod. art.Art. no.
Per tuboFor tube
E024 Ø 42,4 x 2,0 mm - 1 2/3” dia. x 5/64”
E0241 Ø 33,7 x 2,0 mm - 1 1/3” dia. x 5/64”
ZAMAC Cod. art.Art. no.
Per tubo A
For tubeB
I450 Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
65 mm2 9/16””
ZAMAC Cod. art.Art. no.
Per tubo A
For tubeB
I451 Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
65 mm2 9/16””
ZAMAC Cod. art.Art. no.
Per tubo A
For tubeB
I2015 Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
50 mm2’
ZAMAC Cod. art.Art. no.
Per tubo A
For tubeB
I453 Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
87 mm3 7/16”
ZAMAC Cod. art.Art. no.
Per tubo A
For tubeB C
I446 Ø 42,4 x 2,0 mm1 2/3” dia. x 5/64”
22 mm 55/64”
53 mm 2 5/64”
NEW
30by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Con spina di sicurezza ed inserti in gomma. GREZZOWith locking pin and protective plastic washers. RAW
Supporti per Vetro in Pressofusione di Zinco - Zinc Diecast Glass Clamps
D
C B
Ø A
ZAMAC Cod. art.Art. no.
Dimensioni C x DDimensions
Per tubo AFor tube
Spessore vetro BGlass thk.
E00742 38 x 49 mm1 1/2” x 1 15/16”
Ø 33,7 mm1 1/3” dia.
6 e 8 mm1/4” and 5/16”
E00741 38 x 49 mm1 1/2” x 1 15/16”
Ø 42,4 mm1 2/3” dia.
6 e 8 mm1/4” and 5/16”
E00743 38 x 49 mm1 1/2” x 1 15/16”
Superficie pianaFlat face
6 e 8 mm1/4” and 5/16”
31www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
D
C B
Ø A
Con spina di sicurezza ed inserti in gomma. GREZZOWith locking pin and protective plastic washers. RAW
ZAMAC Cod. art.Art. no.
Dimensioni C x DDimensions
Per tubo AFor tube
Spessore vetro BGlass thk.
E007401 43 x 64 mm1 11/16” x 2 33/64”
Ø 42,4 mm1 2/3” dia.
8 e 10 mm5/16” and 3/8”
E007402 43 x 64 mm1 11/16” x 2 33/64”
Ø 48,3 mm1 7/8” dia.
8 e 10 mm5/16” and 3/8”
E00740 43 x 64 mm1 11/16” x 2 33/64”
Superficie pianaFlat face
8 e 10 mm5/16” and 3/8”
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
32by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
B
Ø A
C
D
Con spina di sicurezza ed inserti in gomma. GREZZOWith locking pin and protective plastic washers. RAW
ZAMAC Cod. art.Art. no.
Dimensioni C x DDimensio ns
Per tubo AFor tube
Spessore vetro BGlass thk.
E00760 55 x 55 mm2 11/64” x 2 11/64”
Ø 42,4 mm1 2/3” dia.
8 e 10 mm5/16” and 3/8”
E00761 55 x 55 mm2 11/64” x 2 11/64”
Ø 48,3 mm1 7/8” dia.
8 e 10 mm5/16” and 3/8”
E00762 55 x 55 mm2 11/64” x 2 11/64”
Superficie pianaFlat face
8 e 10 mm5/16” and 3/8”
Supporti per Vetro in Pressofusione di Zinco - Zinc Diecast Glass Clamps
2 pezzi completi di vite e guarnizioni 2 pieces with screw and plastic washers
20.5 715max
Ø A
M6
Iron Cod. art.Art. no.
Per tubo AFor tube
I40550 Ø 33,7 mm - 1 1/3” dia.
I40560 Ø 42,4 mm - 1 2/3” dia.
I40570 Superficie piana - Flat face
1042 1062
Ø 3
0
22.5
M6
Ø A
Iron Cod. art.Art. no.
ForoHole
I4030 Ø 16,2 mm - 41/64” dia.
I4031 Ø 14,2 mm - 9/16” dia.
I4032 Ø 12,2 mm - 1/2” dia.
Completo di dischi di protezione in PVC Complete with plastic washers in PVC
NEW
NEW
33ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
34by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Iron Cod. art.Art. no.
Per tubo A
For tube
I00698 Ø 42,4 mm - 1 2/3” dia.
I00699 Superficie piana - Flat face
Grezzi, con gomme di protezione Raw, with protective rubber bands
Ø A
64.7
10 41.213.5
Ø 3
5
M8Ø
19
Ø 3
0
14
ØA
0-10 mm
35.7
Iron Cod. art.Art. no.
Per tubo AFor tube
I40000/SO Ø 42,4 mm - 1 2/3” dia.
Iron Cod. art.Art. no.
Per tubo AFor tube
I40581 Ø 42,4 mm - 1 2/3” dia.
I40583 Superficie piana - Flat face
Supporti per vetro - Glass clamps
35
Ø A
Supporti per Lamiera - Metal Sheet Holder2 pezzi completo di vite, per lamiere da 1-2 mm 2 pieces with screw, for sheet metal 5/128”- 5/64”
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
35ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
NEW
36 ARTEFERRO
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
37www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
NEW
A
Ø 49
Ø 100
90°
Ø 8.5
159
6
Ø 17.3
65
104
55
Ø12
165
Ø 7512
0°
120°
Iron Cod. art.Art. no.
Spessore vetro AGlass thk.
I2000100 12 e 17,52 mm3/8” - 27/64” and 1/2”
186
147
66
Ø 1
2
A
7612
12
12 76100
100
12
Ø 10
40
29
Supporti per Vetro da Parete - Wall Glass Clamps
Iron Cod. art.Art. no.
Spessore vetro AGlass thk.
I2200100 da 8 a 23 mmfrom 11/32” to 15/16”
A
153
M 1
4
Ø 4
0
Iron Cod. art.Art. no.
Spessore vetro AGlass thk.
I2100100 12 e 17,52 mm3/8” - 27/64” and 1/2”
Supporto per Vetro da Pavimento - Glass Clamp for Ground Anchorage
2 pezzi: piastra di ancoraggio Ø 100 mm con 3 fori svasati e supporto per vetro alto 159 mm2 pieces: anchor flange 3 15/16” dia. and 3 countersunk holes and glass clamp with 6 5/16” inches
Supporto rotondo composto da vite filettata e attacco per vetroRound support complete with threaded screw and glass attachment
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
Tappi Terminali Piani Massicci per Tubo - Flat, Solid End Caps for Tubes
Con zigrinatura - With knurling
Ø A
1,5
Ø A
6
Ø A
Con foro e zigrinatura - With hole and knurling
Con zigrinatura, massicci - With knurling
Con zigrinatura - With knurling
Ø A
M 8
Ø A
M 8
Ø A
M 8
3,5
Tappi Terminali Bombati Massicci per Tubo - Rounded, Solid End Caps for Tubes
NEW
NEW
NEW
NEW
NEW
NEW
38by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Iron Cod. art.Art. no.
Per tubo AFor tube
I4148 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I4149 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube
I0117 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I0119 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube
I4139 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I4141 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube
Foro filettato Threaded hole
I4143 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64” M8
I4144 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64” M8
Iron Cod. art.Art. no.
Per tubo AFor tube
Foro filettato Threaded hole
I01195 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64” M8
I01196 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64” M8
Iron Cod. art.Art. no.
Per tubo AFor tube
I0115 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I01151 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
NEW
39www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Ø A
H
Ø A
Ø 19
Con foro passante e zigrinatura - With hole and knurling
Ø A
Ø 12.2
Con foro passante, zigrinatura e 2 graniWith holes knurling and 2 screw holes
Ø A
H
Ø A
M 8
45°
Massicci, con zigrinatura e semisfera più piccola Solid, with knurling and smaller semi-sphere
Tappi Terminali Semisferici - Semi-Spherical End CapsCon zigrinatura
With knurling
Iron Cod. art.Art. no.
Per tubo AFor tube
I01111 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I01112 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube
Foro filettato 45° Threaded hole 45°
I01211 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64” M8
I01212 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64” M8
Iron Cod. art.Art. no.
Per tubo AFor tube
Foro passante Through hole
I01195/122 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64” Ø 12,2 mm - 31/64” dia.
I01196/122 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64” Ø 12,2 mm - 31/64” dia.
Iron Cod. art.Art. no.
Per tubo AFor tube
Foro passante Through hole
I01195100 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64” Ø 12,2 mm - 31/64” dia.
I01196100 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64” Ø 12,2 mm - 31/64” dia.
Iron Cod. art.Art. no.
Per tubo AFor tube
I0111 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I011 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Tappi Terminali Bombati Massicci per Tubo - Rounded Convex, Solid End Caps for Tubes
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
40by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Tappi Terminali Sagomati - Shaped End Caps
25
Ø A
Tappi Terminali - End Caps
Ø A
filetto M
H
A punta con foro cieco filettato e zigrinatura With knurling, pointed with internal threaded blind hole
(Da combinare alla sfera con foro filettato)(To be combined with spheres)
Iron Cod. art.Art. no.
Per tubo AFor tube
I0119010 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I0119020 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube
I0119110 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I0119120 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube B
I0119210 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64” 44 mm - 1 11/16”
I0119220 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64” 54 mm - 2 1/8”
Iron Cod. art.Art. no.
Per tubo AFor tube
I0119310 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I0119320 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube
I0119410 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64”
I0119420 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64”
Iron Cod. art.Art. no.
Per tubo AFor tube
FilettoThread
I0101 Ø 33,7 x 2,0 mm - 1 1/3” dia x 5/64” M8
I010 Ø 42,4 x 2,0 mm - 1 2/3” dia x 5/64” M10
Ø A
30
Ø A
63.5
20
B
Ø A
Ø A
16
NEW
NEW
NEW
NEW
NEW
41
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
42by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
Tappi Terminali per Tondino - Finials for Round Bars
Iron Cod. art.Art. no.
Per tondinoFor round bar
I910510 Ø 12 x 0,5 mm - 1/2” dia. x 5/256”
I9105 Ø 14 x 0,5 mm - 9/16” dia. x 5/256”
Iron Cod. art.Art. no.
Per tondinoFor round bar
I911010 Ø 12 x 0,5 mm - 1/2” dia. x 5/256”
I9110 Ø 14 x 0,5 mm - 9/16” dia. x 5/256”
Iron Cod. art.Art. no.
Per tondinoFor round bar
I912010 Ø 12 x 0,5 mm - 1/2” dia. x 5/256”
I9120 Ø 14 x 0,5 mm - 9/16” dia. x 5/256”
Iron Cod. art.Art. no.
Per tondinoFor round bar
I911510 Ø 12 x 0,5 mm - 1/2” dia. x 5/256”
I9115 Ø 14 x 0,5 mm - 9/16” dia. x 5/256”
Iron Cod. art.Art. no.
Per tondinoFor round bar
I9125 Ø 12 x 0,5 mm - 1/2” dia. x 5/256”
I912510 Ø 14 x 0,5 mm - 9/16” dia. x 5/256”
Iron Cod. art.Art. no.
Per tondinoFor round bar
I913010 Ø 12 x 0,5 mm - 1/2” dia. x 5/256”
I9130 Ø 14 x 0,5 mm - 9/16” dia. x 5/256”
50
Ø 2
4
A
77
A
Ø 2
8
70
Ø 2
5
A
31
A
Ø 2
7.5
30
Ø 2
1
AA
50
Ø 2
1
NEW
NEW
NEW
NEW
NEW
NEW
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
43www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Sfere Piene con Foro - Holed Spheres, Full Inside
Ø A
F
Ø A
M
Sfera Piena Filettata - Threaded Sphere, Full Inside
Iron Cod. art.Art. no.
Dimensioni A
DimensionsForo
F Hole
I0127 Ø 25 mm foro cieco 1” dia. blind hole
Ø 12,2 mm 1/2” dia.
I0129 Ø 25 mm foro passante1” dia. hole
Ø 12,2 mm 1/2” dia.
I01302 Ø 30 mm foro cieco 1 3/16” dia. blind hole
Ø 12,2 mm 1/2” dia.
I0130 Ø 30 mm foro passante 1 3/16” dia. hole
Ø 12,2 mm 1/2” dia.
I0130/SO Ø 30 mm foro passante con grano laterale 1 3/16” dia. hole with set screw
Ø 12,2 mm 1/2” dia.
Iron Cod. art.Art. no.
Dimensioni A
DimensionsFiletto
M Thread
I012 Ø 60 mm foro cieco 2 23/64” dia. blind hole
M10
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Cod art. Art. no.1902/10Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 80 mm3 5/32” W.
Cod art. Art. no.1902/11Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 80 mm3 5/32” W.
Cod art. Art. no.1902/12Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 60 mm2 23/64” W.
Cod art. Art. no.1902/13Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 100 mm3 15/16” W.
Cod art. Art. no.1902/14Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 75 mm2 61/64” W.
Cod art. Art. no.1902/15Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 150 mm5 29/32” W.
Cod art. Art. no.1902/16Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 150 mm5 29/32” W.
Cod art. Art. no.1902/1Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 125 mm4 59/64” W.
Cod art. Art. no.1902/2Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.L 125 mm4 59/64” W.
Paletti in Ferro Zincato - Pickets in Galvanized Iron
44www.arteferro.com Riproduzione vietata Reproduction prohibited www.arteferro.com
Tutti gli articoli possono essere forniti verniciati su richiesta! - All these products can be painted in your colours of choice!
www.arteferro.com Riproduzione Vietata Reproduction Prohibited www.arteferro.com
by
• Ferro Zincato Verniciabile • Galvanized Paintable Iron
Cod art. Art. no.1902/3Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.
Cod art. Art. no.1902/4Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.
Cod art. Art. no.1902/5Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.
Cod art. Art. no.1902/6Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.
Cod art. Art. no.1902/7Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.
Cod art. Art. no.1902/8Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.
Cod art. Art. no.1902/9Ø 12 mm1/2” dia.H 1000 mm39 3/8” H.
45
Paletti in Ferro Zincato - Pickets in Galvanized Iron
ARTEFERRO
Riproduzione vietata Reproduction prohibited
ARTEFERRO46
WWW.ARTEFERRO.COM
3005/62/03-2010/03-2010/A
ul. Gierdziejewskiego 702-495 Warszawa POLANDTel +48 (22) 397-79-40Fax +48 (22) [email protected] - www.indiapoland.com
POLAN
DSp. z o.o.
ARTEFERRO Chile S.A.
LOS ARRAYANES 250, COMUNA DE COLINA, SANTIAGO DE CHILE
CH
ILE
ARTEFERRO ArgentinaSuarez 760(1162) Capital Federal Buenos AiresRepublica ArgentinaTEL./Fax (+54) 11 43012637
ARGEN
TINA
S.A.
RUA PADRE FEIJÓ, 480 CEP 95190-000SÃO MARCOS / RS BRASILTEL. - FAX (+55) (0) 54 32911416www.arteferrobrasil.com.brarteferro@arteferrobrasil.com.br
BRA
SIL
ARTEFERRO MonterreyS.A. DE C.V.
MEX
ICO
Av. E. Martínez Lara # 117 Parque Industrial MILIMEXCarretera Sta. Rosa Km. 3 Apodaca, Nuevo León C.P. 66637Teléfono: (81) 1295-5094 / 1295-5095Fax: (81) [email protected]
ARTEFERRO BOTNIC INTERNATIONAL LTD
Block C/5 Lagos State small scale Industrial Estate,Fatai Atere Way, Matori, LagosTel. 00234 1 891 4155 - 00234 1 2799 [email protected]
NIG
ERIA
Z.A.E. LA BAUME RN 113 - 34290 SERVIAN FRANCETEL. (+33) (0) 4.67.39.42.81 (lignes groupées) Fax (+33) (0) [email protected]
FRA
NCE
ARTEFERRO Miami L.L.C.
U.S.A
.2955 N.W. 75th STREETMIAMI, FLORIDA 33147 - USA PHONE: (+1) (305) 836-9232 / 1-877-723-6743FAX: (+1) (305) 836-4113www.arteferromiami.com [email protected]
ARTEFERROSUD S.R.L.
ITALY
Via Piano Alvanella 83024 MONTEFORTE IRPINO (AV)Tel. (+39) 0825 68 00 81 Fax (+39) 0825 68 34 98(Per Campania - Puglia - Calabria - Basilicata - Molise)[email protected]
U.S.A
.7947 MESA ROAD - HOUSTONTEXAS 77028 - U.S.A.PHONE: (+1) (713) 694-6065 / 1-800-772-4706 FAX: (+1) (713) 694-2055www.indital.com - [email protected]
28500 ARGANDA DEL REY (MADRID) - ESPAÑAC/. ABEDUL, 43 - Poligono “EL GUIJAR”TEL. (+34) (91) 8701897 - 8700819 FAX (+34) (91) [email protected] www.arteferro.es
ESPAÑ
AS.L.
“ARTEFERRO Russia”OOO
RU
SSIA603092 Nizhny Novgorod (Russia)Moskovskoje shosse, 320 BTEL. (+7) (831) 296-19-99 FAX: (+7) (831) 279-28-63www.arteferro.ru - www.arteferrorussia.com [email protected]
S.A.Targoviste - Romania Soseaua Gaesti, (sat Colanu)Judetul DambovitaTel. 004) 0751060204, (004)0745395590Fax (004)0745731210E-mail: [email protected]
ROM
AN
IAARTEFERRO Ukraina5, AVTOPARKOVA, 02660 Kiev - UkraineTel.: (+38) (044) 4920331Fax: (+38) (044) 4920332E-mail: [email protected]
UK
RAIN
E
SIRKOVISCE bb 40324 GORICAN - HRVATSKAPHONE (+385) (0)40 601-222Fax PHONE (+385) (0)40 601-600 www.arteferro-dohomont.hr [email protected]
HRVA
TSKA
ARTEFERRO Dohomont d.o.o.
SWEDEN: SJÖTULLSG. 3 - S-602 28 NORRKÖPINGTEL. (+46) (0) 11182323 - FAX (+46) (0) 11182328DENMARK: HESSELAGER 19 - DK-2605 BRØNDBYTEL. +45 4362 2563 - FAX +45 4362 2535www.arteferro.se - [email protected]
SWEDEN - DENMARK
ARTEFERRO Skandinavien
VIA VICENZA, 6/1436034 MALO (VICENZA) ITALIATELEFONO (+39) 0445 580 580FAX (+39) 0445 580 874E-mail:[email protected] - www.ilgrandefabbro.com
www.arteferro.com
INDUSTRIA ITALIANA ARTEFERRO