150918 segment schwerindustrie en print - sirtef · ververoostar star 88 verotech 10 verotech 10...
TRANSCRIPT
Heavy Industry
Overhead Crane Ladle Crane
Jib Crane
Heavy Industryapplications
Wire ropes must be capable of withstanding extreme ambient conditions and mechanical stresses present in heavy industry applications. verope offers various ropes, rope end fittings and customer-specific special solutions specifically for heavy industry.
verope provides a global retailer network for special wire ropes to serve the customers wherever the products are needed.
verope offers the following services:• Technical customer service• Technical advice• Rope inspections• Theoretical rope service life calculation
• A broad range of rope tests such as- Tensile test up to 2500 kN- Bending fatigue test for various rope diameters- Variuos tests to determine the rotational behavior
of ropes- Elongation measurement- Modulus of elasticity determination- Test to measure the rope flexibility- Diameter reduction under load measurement- Lateral stiffness determination
verope AG/Headquarters – Zug, Switzerland verope Service Center GmbH – Contwig, Germany verope Distribution Singapore Pte Ltd – Singapore
verope USA – Houston, USA LTI Steel Wire Rope Co. Ltd. – Shanghai, China verope do Brasil – Resende, Brasil
Heavy Industryapplications
Wire ropes must be capable of withstanding extreme ambient conditions and mechanical stresses present in heavy industry applications. verope offers various ropes, rope end fittings and customer-specific special solutions specifically for heavy industry.
verope provides a global retailer network for special wire ropes to serve the customers wherever the products are needed.
verope sites:
verope offers the following services:• Technical customer service• Technical advice• Rope inspections• Theoretical rope service life calculation
• A broad range of rope tests such as - Tensile test up to 2500 kN - Bending fatigue test for various rope diameters - Variuos tests to determine the rotational behavior
of ropes - Elongation measurement - Modulus of elasticity determination - Test to measure the rope flexibility
- Diameter reduction under load measurement - Lateral stiffness determination
Open spelter socket: Metal or resin socketing
Flemish eye ferrule-secured termination
Ferrule-secured eye termination
Ferrule-secured thimble termination
Ferrule-secured solid thimble termination
Threaded socket swaged
Closed socket swaged
Open socket swaged
Ferrule-secured open thimble termination
End stop: either metal-/resin socketing or swaged
verope can also offer customer-specific solutions in addition to the standard rope end connections.Special solutions on request.
Standard ropeend connections
Closed end socket: Metal or cast synthetic resin
Rope applications forHeavy Industry
Jib CraneOverhead Crane Ladle Crane
Overhead Crane
Hoist Rope
1 When a rotation-resistant rope is required | 2 Preferably for single-layer winding | 3 For special applications
Auxillary Hoist Rope
verotop E
verotop E 1
• flexible• rotation-resistant
• compacted strands
Hoist Rope
Auxillary Hoist Rope
verotop
verotop1
• very flexible • rotation-resistant
• compacted strands
Auxillary Hoist Rope
Hoist Rope
veropro 8
veropro 8• 8-strand • non-rotation resistant• compacted outer strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
verosteel 8
verosteel 8• 8-strand • non-rotation resistant
• compacted outer strands
Hoist Rope
Auxillary Hoist Rope
verotech 10
verotech 10• 10-strand, very flexible • non-rotation resistant• parallel lay construction• compacted strands• rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
verostar 8
verostar 8 2 • 8-strand • non-rotation resistant• conventional strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
veropower 8
veropower 8 3 • rotary swaged, 8-strand • non-rotation resistant• parallel lay construction• compacted outer strands• rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
veropro 10
veropro 10• 10-strand, very flexible • non-rotation resistant• compacted strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
Ladle Crane
Hoist Rope Auxillary Hoist Rope
1 When a rotation-resistant rope is required | 2 Casting crane with high temperatures | 3 Preferably for single-layer winding | 4 For special applicationsverotop E
verotop E 1
• flexible• rotation-resistant
• compacted strands
verotop
verotop1
• very flexible • rotation-resistant
• compacted strands
veropro 8
veropro 8• 8-strand • non-rotation resistant• compacted outer strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
verosteel 8
verosteel 8 2
• 8-strand • non-rotation resistant
• compacted outer strands
Hoist Rope
Auxillary Hoist Rope
verotech 10
verotech 10• 10-strand, very flexible • non-rotation resistant• parallel lay construction• compacted strands• rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
verostar 8
verostar 8 3 • 8-strand • non-rotation resistant• conventional strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
veropower 8
veropower 8 4 • rotary swaged, 8-strand • non-rotation resistant• parallel lay construction• compacted outer strands• rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
veropro 10
veropro 10• 10-strand, very flexible • non-rotation resistant• compacted strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
Hoist Rope
Auxillary Hoist Rope
Hoist Rope
Auxillary Hoist Rope
Jib Crane
Hoist Rope
1 For special applications
verotop E
verotop E• flexible• rotation-resistant
• compacted strands
Hoist Ropeverotop
verotop• very flexible • rotation-resistant
• compacted strands
Hoist Rope
veropro 8
veropro 8• 8-strand • non-rotation resistant• compacted outer strands • rope core covered with a plastic layer
Hoist Rope
verotech 10
verotech 10• 10-strand, very flexible • non-rotation resistant• parallel lay construction• compacted strands• rope core covered with a plastic layer
Hoist Rope
verostar 8
verostar 8 • 8-strand • non-rotation resistant• conventional strands • rope core covered with a plastic layer
Hoist Ropeveropower 8
veropower 8 1
• rotary swaged, 8-strand • non-rotation resistant• parallel lay construction• compacted outer strands• rope core covered with a plastic layer
Hoist Rope
Ladle Crane
Hoist Rope Auxillary Hoist Rope
1 When a rotation-resistant rope is required | 2 Casting crane with high temperatures | 3 Preferably for single-layer winding | 4 For special applicationsverotop E
verotop E 1
• flexible• rotation-resistant
• compacted strands
verotop
verotop1
• very flexible • rotation-resistant
• compacted strands
veropro 8
veropro 8• 8-strand • non-rotation resistant• compacted outer strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
verosteel 8
verosteel 8 2
• 8-strand • non-rotation resistant
• compacted outer strands
Hoist Rope
Auxillary Hoist Rope
verotech 10
verotech 10• 10-strand, very flexible • non-rotation resistant• parallel lay construction• compacted strands• rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
verostar 8
verostar 8 3 • 8-strand • non-rotation resistant• conventional strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
veropower 8
veropower 8 4 • rotary swaged, 8-strand • non-rotation resistant• parallel lay construction• compacted outer strands• rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
veropro 10
veropro 10• 10-strand, very flexible • non-rotation resistant• compacted strands • rope core covered with a plastic layer
Hoist Rope
Auxillary Hoist Rope
Hoist Rope
Auxillary Hoist Rope
Hoist Rope
Auxillary Hoist Rope
Jib Crane
Hoist Rope
1 For special applications
verotop E
verotop E• flexible• rotation-resistant
• compacted strands
Hoist Ropeverotop
verotop• very flexible • rotation-resistant
• compacted strands
Hoist Rope
veropro 8
veropro 8• 8-strand • non-rotation resistant• compacted outer strands • rope core covered with a plastic layer
Hoist Rope
verotech 10
verotech 10• 10-strand, very flexible • non-rotation resistant• parallel lay construction• compacted strands• rope core covered with a plastic layer
Hoist Rope
verostar 8
verostar 8 • 8-strand • non-rotation resistant• conventional strands • rope core covered with a plastic layer
Hoist Ropeveropower 8
veropower 8 1
• rotary swaged, 8-strand • non-rotation resistant• parallel lay construction• compacted outer strands• rope core covered with a plastic layer
Hoist Rope
Special wire ropesfor applications inHeavy Industry
veropower 8
verosteel 8
veropro 10
veropro 8
veropower 8
verosteel 8
veropro 10
veropro 8verotop
verotopverotop E
verotop Everostar 8verostar 8 verotech 10
verotech 10
verotop
verotopA superior balanced rope when resistance to rotation becomes most critical.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
is e
ither
brig
ht o
r gal
vani
zed.
• A
vera
ge fi
ll fa
ctor
0.7
38 •
Lay
type
: Lan
g La
y •
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vi
sibl
e br
oken
out
er w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309:
RC
N=2
3-2
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
8 5/16 0.313 61.1 6.2 62.7 6.4
9 0.397 77.3 7.9 79.4 8.1
10 0.490 95.4 9.7 98.0 10
11 7/16 0.593 115.5 11.8 118.6 12.1
12 0.705 137.4 14 141.2 14.4
12.7 1/2 0.790 153.9 15.7 158.1 16.1
13 0.828 161.3 16.4 165.7 16.9
14 0.960 187.0 19.1 192.2 19.6
15 1.102 214.7 21.9 220.6 22.5
16 5/8 1.254 244.3 24.9 251.0 25.6
17 1.415 275.8 28.1 283.3 28.9
18 1.587 309.2 31.5 317.7 32.4
19 3/4 1.768 344.5 35.1 353.9 36.1
20 1.959 381.7 38.9 392.2 40
21 2.160 420.8 42.9 432.4 44.1
22 2.371 461.9 47.1 474.5 48.4
22.4 2.458 478.8 48.8 491.9 50.1
23 2.591 504.8 51.4 518.6 52.9
24 2.821 549.7 56 564.7 57.5
25 3.061 596.4 60.8 612.8 62.4
25.4 1 3.160 615.7 62.7 632.5 64.5
26 3.311 645.1 65.7 662.8 67.5
27 3.571 695.7 70.9 714.7 72.8
28 3.840 748.2 76.2 768.7 78.3
28.6 1-1/8 4.006 780.6 79.5 802.0 81.7
29 4.119 802.6 81.8 824.5 84
30 4.408 858.9 87.5 882.4 89.9
31 4.707 917.1 93.4 942.2 96
32 1-1/4 5.015 977.2 99.6 1004 102.3
33 5.334 1039 105.9 1068 108.8
34 5.662 1103 112.4 1133 115.5
35 1-3/8 6.000 1169 119.1 1201 122.4
36 6.348 1237 126 1271 129.5
38 1-1/2 7.072 1378 140.4 1416 144.3
40 7.837 1527 155.6 1569 159.8
41 8.233 1604 163.5 1648 167.9
42 8.640 1683 171.5 1729 176.2
43 9.056 1764 179.8 1813 184.7
44 9.482 1848 188.3 1898 193.4
45 1-3/4 9.918 1932 196.9 1985 202.3
46 10.364 2019 205.8 2075 211.4
48 11.285 2199 224 2259 230.2
50 2 12.245 2386 243.1 2451 249.8
52 13.244 2580 262.9 2651 270.1
54 2-1/8 14.282 2783 283.6
56 15.360 2993 305
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
8 5/16 0.21 0.1 6.9 7.1
9 0.27 0.12 8.7 8.9
10 0.33 0.15 10.7 11
11 7/16 0.4 0.18 13 13.3
12 0.47 0.22 15.4 15.9
12.7 1/2 0.53 0.24 17.3 17.8
13 0.56 0.25 18.1 18.6
14 0.65 0.29 21 21.6
15 0.74 0.34 24.1 24.8
16 5/8 0.84 0.38 27.5 28.2
17 0.95 0.43 31 31.8
18 1.07 0.48 34.8 35.7
19 3/4 1.19 0.54 38.7 39.8
20 1.32 0.6 42.9 44.1
21 1.45 0.66 47.3 48.6
22 1.59 0.72 51.9 53.3
22.4 1.65 0.75 53.8 55.3
23 1.74 0.79 56.7 58.3
24 1.9 0.86 61.8 63.5
25 2.06 0.93 67 68.9
25.4 1 2.12 0.96 69.2 71.1
26 2.22 1.01 72.5 74.5
27 2.4 1.09 78.2 80.3
28 2.58 1.17 84.1 86.4
28.6 1-1/8 2.69 1.22 87.7 90.1
29 2.77 1.26 90.2 92.7
30 2.96 1.34 96.5 99.2
31 3.16 1.44 103.1 105.9
32 1-1/4 3.37 1.53 109.8 112.8
33 3.58 1.63 116.8 120
34 3.8 1.73 124 127.4
35 1-3/8 4.03 1.83 131.4 135
36 4.27 1.94 139 142.8
38 1-1/2 4.75 2.16 154.9 159.1
40 5.27 2.39 171.6 176.3
41 5.53 2.51 180.3 185.2
42 5.81 2.63 189.2 194.4
43 6.09 2.76 198.3 203.8
44 6.37 2.89 207.7 213.3
45 1-3/4 6.66 3.02 217.2 223.2
46 6.96 3.16 227 233.2
48 7.58 3.44 247.1 253.9
50 2 8.23 3.73 268.2 275.5
52 8.9 4.04 290 298
54 2-1/8 9.6 4.35 312.8
56 10.32 4.68 336.4
verotop
verotopA superior balanced rope when resistance to rotation becomes most critical.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
is e
ither
brig
ht o
r gal
vani
zed.
• A
vera
ge fi
ll fa
ctor
0.7
38 •
Lay
type
: Lan
g La
y •
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vi
sibl
e br
oken
out
er w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309:
RC
N=2
3-2
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
8 5/16 0.313 61.1 6.2 62.7 6.4
9 0.397 77.3 7.9 79.4 8.1
10 0.490 95.4 9.7 98.0 10
11 7/16 0.593 115.5 11.8 118.6 12.1
12 0.705 137.4 14 141.2 14.4
12.7 1/2 0.790 153.9 15.7 158.1 16.1
13 0.828 161.3 16.4 165.7 16.9
14 0.960 187.0 19.1 192.2 19.6
15 1.102 214.7 21.9 220.6 22.5
16 5/8 1.254 244.3 24.9 251.0 25.6
17 1.415 275.8 28.1 283.3 28.9
18 1.587 309.2 31.5 317.7 32.4
19 3/4 1.768 344.5 35.1 353.9 36.1
20 1.959 381.7 38.9 392.2 40
21 2.160 420.8 42.9 432.4 44.1
22 2.371 461.9 47.1 474.5 48.4
22.4 2.458 478.8 48.8 491.9 50.1
23 2.591 504.8 51.4 518.6 52.9
24 2.821 549.7 56 564.7 57.5
25 3.061 596.4 60.8 612.8 62.4
25.4 1 3.160 615.7 62.7 632.5 64.5
26 3.311 645.1 65.7 662.8 67.5
27 3.571 695.7 70.9 714.7 72.8
28 3.840 748.2 76.2 768.7 78.3
28.6 1-1/8 4.006 780.6 79.5 802.0 81.7
29 4.119 802.6 81.8 824.5 84
30 4.408 858.9 87.5 882.4 89.9
31 4.707 917.1 93.4 942.2 96
32 1-1/4 5.015 977.2 99.6 1004 102.3
33 5.334 1039 105.9 1068 108.8
34 5.662 1103 112.4 1133 115.5
35 1-3/8 6.000 1169 119.1 1201 122.4
36 6.348 1237 126 1271 129.5
38 1-1/2 7.072 1378 140.4 1416 144.3
40 7.837 1527 155.6 1569 159.8
41 8.233 1604 163.5 1648 167.9
42 8.640 1683 171.5 1729 176.2
43 9.056 1764 179.8 1813 184.7
44 9.482 1848 188.3 1898 193.4
45 1-3/4 9.918 1932 196.9 1985 202.3
46 10.364 2019 205.8 2075 211.4
48 11.285 2199 224 2259 230.2
50 2 12.245 2386 243.1 2451 249.8
52 13.244 2580 262.9 2651 270.1
54 2-1/8 14.282 2783 283.6
56 15.360 2993 305
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
8 5/16 0.21 0.1 6.9 7.1
9 0.27 0.12 8.7 8.9
10 0.33 0.15 10.7 11
11 7/16 0.4 0.18 13 13.3
12 0.47 0.22 15.4 15.9
12.7 1/2 0.53 0.24 17.3 17.8
13 0.56 0.25 18.1 18.6
14 0.65 0.29 21 21.6
15 0.74 0.34 24.1 24.8
16 5/8 0.84 0.38 27.5 28.2
17 0.95 0.43 31 31.8
18 1.07 0.48 34.8 35.7
19 3/4 1.19 0.54 38.7 39.8
20 1.32 0.6 42.9 44.1
21 1.45 0.66 47.3 48.6
22 1.59 0.72 51.9 53.3
22.4 1.65 0.75 53.8 55.3
23 1.74 0.79 56.7 58.3
24 1.9 0.86 61.8 63.5
25 2.06 0.93 67 68.9
25.4 1 2.12 0.96 69.2 71.1
26 2.22 1.01 72.5 74.5
27 2.4 1.09 78.2 80.3
28 2.58 1.17 84.1 86.4
28.6 1-1/8 2.69 1.22 87.7 90.1
29 2.77 1.26 90.2 92.7
30 2.96 1.34 96.5 99.2
31 3.16 1.44 103.1 105.9
32 1-1/4 3.37 1.53 109.8 112.8
33 3.58 1.63 116.8 120
34 3.8 1.73 124 127.4
35 1-3/8 4.03 1.83 131.4 135
36 4.27 1.94 139 142.8
38 1-1/2 4.75 2.16 154.9 159.1
40 5.27 2.39 171.6 176.3
41 5.53 2.51 180.3 185.2
42 5.81 2.63 189.2 194.4
43 6.09 2.76 198.3 203.8
44 6.37 2.89 207.7 213.3
45 1-3/4 6.66 3.02 217.2 223.2
46 6.96 3.16 227 233.2
48 7.58 3.44 247.1 253.9
50 2 8.23 3.73 268.2 275.5
52 8.9 4.04 290 298
54 2-1/8 9.6 4.35 312.8
56 10.32 4.68 336.4
verotop E
verotop ECombines high breaking strength and good rotation resistance with remarkable efficiency.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
is e
ither
brig
ht o
r gal
vani
zed.
• A
vera
ge fi
ll fa
ctor
0.7
00 •
Lay
type
: Lan
g La
y •
Rop
e C
ateg
ory
Num
ber (
RC
N)
to d
eter
min
e th
e nu
mbe
r of v
isib
le b
roke
n ou
ter w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309:
RC
N=2
3-2
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
8 5/16 0.305 55.2 5.6 60.2 6.1
9 0.387 69.8 7.1 76.2 7.8
10 0.477 86.2 8.8 94.1 9.6
11 7/16 0.577 104.3 10.6 113.9 11.6
12 0.687 124.1 12.6 135.5 13.8
13 0.806 145.7 14.8 159.1 16.2
14 0.935 169.0 17.2 184.5 18.8
15 1.074 194.0 19.8 211.8 21.6
16 5/8 1.222 220.7 22.5 241.0 24.6
18 1.546 279.3 28.5 305.0 31.1
19 3/4 1.723 311.2 31.7 339.8 34.6
20 1.909 344.8 35.1 376.5 38.4
22 2.310 417.2 42.5 455.6 46.4
23 2.524 456.0 46.5 497.9 50.7
24 2.749 496.5 50.6 542.1 55.2
25 2.983 538.8 54.9 588.3 59.9
26 3.226 582.7 59.4 636.3 64.8
27 3.479 628.4 64 686.2 69.9
28 3.741 675.8 68.9 737.9 75.2
29 4.013 725.0 73.9 791.6 80.7
30 4.295 775.8 79.1 847.1 86.3
32 1-1/4 4.887 882.7 90 963.8 98.2
34 5.517 983.8 100.3 1077 109.8
35 1-3/8 5.846 1043 106.2 1142 116.3
36 6.185 1103 112.4 1208 123.1
38 1-1/2 6.891 1229 125.2 1346 137.1
40 7.635 1362 138.8 1491 151.9
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
8 5/16 0.21 0.09 6.2 6.8
9 0.26 0.12 7.8 8.6
10 0.32 0.15 9.7 10.6
11 7/16 0.39 0.18 11.7 12.8
12 0.46 0.21 14 15.2
13 0.54 0.25 16.4 17.9
14 0.63 0.29 19 20.7
15 0.72 0.33 21.8 23.8
16 5/8 0.82 0.37 24.8 27.1
18 1.04 0.47 31.4 34.3
19 3/4 1.16 0.53 35 38.2
20 1.28 0.58 38.8 42.3
22 1.55 0.7 46.9 51.2
23 1.7 0.77 51.3 56
24 1.85 0.84 55.8 60.9
25 2 0.91 60.6 66.1
26 2.17 0.98 65.5 71.5
27 2.34 1.06 70.6 77.1
28 2.51 1.14 76 82.9
29 2.7 1.22 81.5 89
30 2.89 1.31 87.2 95.2
32 1-1/4 3.28 1.49 99.2 108.3
34 3.71 1.68 110.6 121.1
35 1-3/8 3.93 1.78 117.2 128.3
36 4.16 1.89 124 135.8
38 1-1/2 4.63 2.1 138.1 151.3
40 5.13 2.33 153.1 167.6
verostar 8
verostar 8Achieves best service life in reeving systems with single layer drums.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is b
right
, gal
vani
zed
finis
h on
requ
est.
• A
vera
ge fi
ll fac
tor 0
.610
• O
rdin
ary
or L
ang
Lay
avai
labl
e •
Rop
e C
ateg
ory
Num
ber (
RC
N)
to d
eter
min
e th
e nu
mbe
r of v
isib
le b
roke
n ou
ter w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309
• N
omin
al ro
pe d
iam
eter
till 4
2mm
RC
N=
09 •
Nom
inal
rope
dia
met
er 4
3mm
to 4
8mm
RC
N=1
1 N
omin
al ro
pe d
iam
eter
abo
ve 4
8mm
RC
N=1
3 •
Furt
her d
etai
ls: w
ww
.ver
ope.
com
/en/
RC
N
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1770 1960mm* Inch lb/ft1 kg/ft1
8 5/16 0.19 0.08 5.4 6
9 0.23 0.11 6.8 7.5
10 0.29 0.13 8.4 9.3
11 7/16 0.35 0.16 10.2 11.3
12 0.42 0.19 12.1 13.4
12.7 1/2 0.47 0.21 13.6 15
13 0.49 0.22 14.2 15.7
14 0.57 0.26 16.5 18.2
15 0.65 0.3 18.9 20.9
16 5/8 0.74 0.34 21.5 23.8
17 0.84 0.38 24.3 26.9
18 0.94 0.43 27.2 30.2
19 3/4 1.05 0.47 30.3 33.6
20 1.16 0.53 33.6 37.2
21 1.28 0.58 37.1 41.1
22 1.4 0.64 40.7 45.1
22.4 1.45 0.66 42.2 46.7
23 1.53 0.7 44.5 49.2
24 1.67 0.76 48.4 53.6
25 1.81 0.82 52.5 58.2
25.4 1 1.87 0.85 54.2 60.1
26 1.96 0.89 56.8 62.9
27 2.11 0.96 61.3 67.9
28 2.27 1.03 65.9 73
28.6 1-1/8 2.37 1.08 68.8 76.1
29 2.44 1.11 70.7 78.3
30 2.61 1.18 75.7 83.8
31 2.78 1.26 80.8 89.5
32 1-1/4 2.97 1.35 86.1 95.3
33 3.16 1.43 91.5 101.4
34 3.35 1.52 97.2 107.6
35 1-3/8 3.55 1.61 103 114
36 3.76 1.7 109 120.6
38 1-1/2 4.18 1.9 121.4 134.4
40 4.64 2.1 134.5 148.9
41.3 1-5/8 4.94 2.24 143.4 158.8
42 5.11 2.32 148.3 164.2
44 5.61 2.55 162.8 180.2
45 1-3/4 5.87 2.66 170.2 188.5
46 6.13 2.78 177.9 197
47.5 1-7/8 6.54 2.97 189.7 210
48 6.68 3.03 193.7 214.5
50 2 7.24 3.29 210.2 232.7
52 7.83 3.55 227.3 251.7
54 2-1/8 8.45 3.83 245.1 271.5
56 9.09 4.12 263.6 291.9
58 9.75 4.42 282.8 313.2
60 2-3/8 10.43 4.73 302.6 335.1
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1770 1960
mm* Inch kg/m kN t kN t
8 5/16 0.276 47.9 4.9 53.0 5.4
9 0.349 60.6 6.2 67.1 6.8
10 0.431 74.8 7.6 82.8 8.4
11 7/16 0.522 90.5 9.2 100.2 10.2
12 0.621 107.7 11 119.3 12.2
12.7 1/2 0.695 120.6 12.3 133.6 13.6
13 0.729 126.4 12.9 140.0 14.3
14 0.845 146.6 14.9 162.3 16.5
15 0.970 168.3 17.1 186.3 19
16 5/8 1.104 191.5 19.5 212.0 21.6
17 1.246 216.2 22 239.4 24.4
18 1.397 242.3 24.7 268.3 27.3
19 3/4 1.557 270.0 27.5 299.0 30.5
20 1.725 299.2 30.5 331.3 33.8
21 1.902 329.8 33.6 365.2 37.2
22 2.087 362.0 36.9 400.9 40.8
22.4 2.164 375.3 38.2 415.6 42.3
23 2.281 395.7 40.3 438.1 44.6
24 2.484 430.8 43.9 477.1 48.6
25 2.695 467.5 47.6 517.6 52.7
25.4 1 2.782 482.5 49.2 534.3 54.4
26 2.915 505.6 51.5 559.9 57.1
27 3.143 545.2 55.6 603.8 61.5
28 3.380 586.4 59.8 649.3 66.2
28.6 1-1/8 3.527 611.8 62.3 677.4 69
29 3.626 629.0 64.1 696.5 71
30 3.881 673.1 68.6 745.4 76
31 4.144 718.8 73.2 795.9 81.1
32 1-1/4 4.415 765.9 78 848.1 86.4
33 4.696 814.5 83 901.9 91.9
34 4.984 864.6 88.1 957.4 97.6
35 1-3/8 5.282 916.2 93.4 1015 103.4
36 5.588 969.3 98.8 1073 109.4
38 1-1/2 6.226 1080 110.1 1196 121.9
40 6.899 1197 121.9 1325 135
41.3 1-5/8 7.355 1276 130 1413 144
42 7.606 1319 134.4 1461 148.9
44 8.348 1448 147.6 1603 163.4
45 1-3/4 8.731 1515 154.3 1677 170.9
46 9.124 1583 161.3 1753 178.6
47.5 1-7/8 9.729 1688 172 1869 190.4
48 9.934 1723 175.6 1908 194.4
50 2 10.780 1870 190.5 2071 211
52 11.659 2022 206.1 2239 228.2
54 2-1/8 12.573 2181 222.2 2415 246.1
56 13.522 2346 239 2597 264.7
58 14.505 2516 256.4 2786 283.9
60 2-3/8 15.523 2693 274.4 2982 303.8
verotop E
verotop ECombines high breaking strength and good rotation resistance with remarkable efficiency.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
is e
ither
brig
ht o
r gal
vani
zed.
• A
vera
ge fi
ll fa
ctor
0.7
00 •
Lay
type
: Lan
g La
y •
Rop
e C
ateg
ory
Num
ber (
RC
N)
to d
eter
min
e th
e nu
mbe
r of v
isib
le b
roke
n ou
ter w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309:
RC
N=2
3-2
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
8 5/16 0.305 55.2 5.6 60.2 6.1
9 0.387 69.8 7.1 76.2 7.8
10 0.477 86.2 8.8 94.1 9.6
11 7/16 0.577 104.3 10.6 113.9 11.6
12 0.687 124.1 12.6 135.5 13.8
13 0.806 145.7 14.8 159.1 16.2
14 0.935 169.0 17.2 184.5 18.8
15 1.074 194.0 19.8 211.8 21.6
16 5/8 1.222 220.7 22.5 241.0 24.6
18 1.546 279.3 28.5 305.0 31.1
19 3/4 1.723 311.2 31.7 339.8 34.6
20 1.909 344.8 35.1 376.5 38.4
22 2.310 417.2 42.5 455.6 46.4
23 2.524 456.0 46.5 497.9 50.7
24 2.749 496.5 50.6 542.1 55.2
25 2.983 538.8 54.9 588.3 59.9
26 3.226 582.7 59.4 636.3 64.8
27 3.479 628.4 64 686.2 69.9
28 3.741 675.8 68.9 737.9 75.2
29 4.013 725.0 73.9 791.6 80.7
30 4.295 775.8 79.1 847.1 86.3
32 1-1/4 4.887 882.7 90 963.8 98.2
34 5.517 983.8 100.3 1077 109.8
35 1-3/8 5.846 1043 106.2 1142 116.3
36 6.185 1103 112.4 1208 123.1
38 1-1/2 6.891 1229 125.2 1346 137.1
40 7.635 1362 138.8 1491 151.9
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
8 5/16 0.21 0.09 6.2 6.8
9 0.26 0.12 7.8 8.6
10 0.32 0.15 9.7 10.6
11 7/16 0.39 0.18 11.7 12.8
12 0.46 0.21 14 15.2
13 0.54 0.25 16.4 17.9
14 0.63 0.29 19 20.7
15 0.72 0.33 21.8 23.8
16 5/8 0.82 0.37 24.8 27.1
18 1.04 0.47 31.4 34.3
19 3/4 1.16 0.53 35 38.2
20 1.28 0.58 38.8 42.3
22 1.55 0.7 46.9 51.2
23 1.7 0.77 51.3 56
24 1.85 0.84 55.8 60.9
25 2 0.91 60.6 66.1
26 2.17 0.98 65.5 71.5
27 2.34 1.06 70.6 77.1
28 2.51 1.14 76 82.9
29 2.7 1.22 81.5 89
30 2.89 1.31 87.2 95.2
32 1-1/4 3.28 1.49 99.2 108.3
34 3.71 1.68 110.6 121.1
35 1-3/8 3.93 1.78 117.2 128.3
36 4.16 1.89 124 135.8
38 1-1/2 4.63 2.1 138.1 151.3
40 5.13 2.33 153.1 167.6
verostar 8
verostar 8Achieves best service life in reeving systems with single layer drums.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is b
right
, gal
vani
zed
finis
h on
requ
est.
• A
vera
ge fi
ll fac
tor 0
.610
• O
rdin
ary
or L
ang
Lay
avai
labl
e •
Rop
e C
ateg
ory
Num
ber (
RC
N)
to d
eter
min
e th
e nu
mbe
r of v
isib
le b
roke
n ou
ter w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309
• N
omin
al ro
pe d
iam
eter
till 4
2mm
RC
N=
09 •
Nom
inal
rope
dia
met
er 4
3mm
to 4
8mm
RC
N=1
1 N
omin
al ro
pe d
iam
eter
abo
ve 4
8mm
RC
N=1
3 •
Furt
her d
etai
ls: w
ww
.ver
ope.
com
/en/
RC
N
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1770 1960mm* Inch lb/ft1 kg/ft1
8 5/16 0.19 0.08 5.4 6
9 0.23 0.11 6.8 7.5
10 0.29 0.13 8.4 9.3
11 7/16 0.35 0.16 10.2 11.3
12 0.42 0.19 12.1 13.4
12.7 1/2 0.47 0.21 13.6 15
13 0.49 0.22 14.2 15.7
14 0.57 0.26 16.5 18.2
15 0.65 0.3 18.9 20.9
16 5/8 0.74 0.34 21.5 23.8
17 0.84 0.38 24.3 26.9
18 0.94 0.43 27.2 30.2
19 3/4 1.05 0.47 30.3 33.6
20 1.16 0.53 33.6 37.2
21 1.28 0.58 37.1 41.1
22 1.4 0.64 40.7 45.1
22.4 1.45 0.66 42.2 46.7
23 1.53 0.7 44.5 49.2
24 1.67 0.76 48.4 53.6
25 1.81 0.82 52.5 58.2
25.4 1 1.87 0.85 54.2 60.1
26 1.96 0.89 56.8 62.9
27 2.11 0.96 61.3 67.9
28 2.27 1.03 65.9 73
28.6 1-1/8 2.37 1.08 68.8 76.1
29 2.44 1.11 70.7 78.3
30 2.61 1.18 75.7 83.8
31 2.78 1.26 80.8 89.5
32 1-1/4 2.97 1.35 86.1 95.3
33 3.16 1.43 91.5 101.4
34 3.35 1.52 97.2 107.6
35 1-3/8 3.55 1.61 103 114
36 3.76 1.7 109 120.6
38 1-1/2 4.18 1.9 121.4 134.4
40 4.64 2.1 134.5 148.9
41.3 1-5/8 4.94 2.24 143.4 158.8
42 5.11 2.32 148.3 164.2
44 5.61 2.55 162.8 180.2
45 1-3/4 5.87 2.66 170.2 188.5
46 6.13 2.78 177.9 197
47.5 1-7/8 6.54 2.97 189.7 210
48 6.68 3.03 193.7 214.5
50 2 7.24 3.29 210.2 232.7
52 7.83 3.55 227.3 251.7
54 2-1/8 8.45 3.83 245.1 271.5
56 9.09 4.12 263.6 291.9
58 9.75 4.42 282.8 313.2
60 2-3/8 10.43 4.73 302.6 335.1
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1770 1960
mm* Inch kg/m kN t kN t
8 5/16 0.276 47.9 4.9 53.0 5.4
9 0.349 60.6 6.2 67.1 6.8
10 0.431 74.8 7.6 82.8 8.4
11 7/16 0.522 90.5 9.2 100.2 10.2
12 0.621 107.7 11 119.3 12.2
12.7 1/2 0.695 120.6 12.3 133.6 13.6
13 0.729 126.4 12.9 140.0 14.3
14 0.845 146.6 14.9 162.3 16.5
15 0.970 168.3 17.1 186.3 19
16 5/8 1.104 191.5 19.5 212.0 21.6
17 1.246 216.2 22 239.4 24.4
18 1.397 242.3 24.7 268.3 27.3
19 3/4 1.557 270.0 27.5 299.0 30.5
20 1.725 299.2 30.5 331.3 33.8
21 1.902 329.8 33.6 365.2 37.2
22 2.087 362.0 36.9 400.9 40.8
22.4 2.164 375.3 38.2 415.6 42.3
23 2.281 395.7 40.3 438.1 44.6
24 2.484 430.8 43.9 477.1 48.6
25 2.695 467.5 47.6 517.6 52.7
25.4 1 2.782 482.5 49.2 534.3 54.4
26 2.915 505.6 51.5 559.9 57.1
27 3.143 545.2 55.6 603.8 61.5
28 3.380 586.4 59.8 649.3 66.2
28.6 1-1/8 3.527 611.8 62.3 677.4 69
29 3.626 629.0 64.1 696.5 71
30 3.881 673.1 68.6 745.4 76
31 4.144 718.8 73.2 795.9 81.1
32 1-1/4 4.415 765.9 78 848.1 86.4
33 4.696 814.5 83 901.9 91.9
34 4.984 864.6 88.1 957.4 97.6
35 1-3/8 5.282 916.2 93.4 1015 103.4
36 5.588 969.3 98.8 1073 109.4
38 1-1/2 6.226 1080 110.1 1196 121.9
40 6.899 1197 121.9 1325 135
41.3 1-5/8 7.355 1276 130 1413 144
42 7.606 1319 134.4 1461 148.9
44 8.348 1448 147.6 1603 163.4
45 1-3/4 8.731 1515 154.3 1677 170.9
46 9.124 1583 161.3 1753 178.6
47.5 1-7/8 9.729 1688 172 1869 190.4
48 9.934 1723 175.6 1908 194.4
50 2 10.780 1870 190.5 2071 211
52 11.659 2022 206.1 2239 228.2
54 2-1/8 12.573 2181 222.2 2415 246.1
56 13.522 2346 239 2597 264.7
58 14.505 2516 256.4 2786 283.9
60 2-3/8 15.523 2693 274.4 2982 303.8
veropro 8
veropro 8
Rope with very high structural stability, achieves excellent bending fatigue results.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill f
acto
r 0.6
66 •
Ord
inar
y or
Lan
g La
y av
aila
ble
• R
ope
Cat
egor
y N
umbe
r (R
CN
) to
det
erm
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s, s
igna
ling
disc
ard
of ro
pe a
cc. I
SO
430
9 •
Nom
inal
rope
dia
met
er ti
ll 42
mm
RC
N=
09 •
Nom
inal
rope
dia
met
er 4
3mm
to 4
8mm
RC
N=1
1 N
omin
al ro
pe d
iam
eter
abo
ve 4
8mm
RC
N=1
3 •
Furt
her d
etai
ls: w
ww
.ver
ope.
com
/en/
RC
N
Nominalrope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1770 1960 2160mm* Inch lb/ft1 kg/ft1
8 5/16 0.19 0.09 5.9 6.5 6.8
9 0.24 0.11 7.4 8.2 8.6
10 0.3 0.14 9.2 10.1 10.6
11 7/16 0.37 0.17 11.1 12.3 12.9
12 0.44 0.2 13.2 14.6 15.3
12.7 1/2 0.49 0.22 14.8 16.3 17.2
13 0.51 0.23 15.5 17.1 18
14 0.59 0.27 18 19.9 20.9
15 0.68 0.31 20.6 22.8 23.9
16 5/8 0.77 0.35 23.4 25.9 27.2
17 0.87 0.4 26.5 29.3 30.8
18 0.98 0.44 29.7 32.8 34.5
19 3/4 1.09 0.5 33.1 36.6 38.4
20 1.21 0.55 36.6 40.5 42.6
21 1.33 0.6 40.4 44.7 46.9
22 1.46 0.66 44.3 49 51.5
22.4 1.52 0.69 46 50.8 53.4
23 1.6 0.73 48.4 53.6 56.3
24 1.74 0.79 52.8 58.4 61.3
25 1.89 0.86 57.2 63.3 66.5
25.4 1 1.95 0.88 59.1 65.4 68.7
26 2.04 0.93 61.9 68.5 71.9
27 2.2 1 66.8 73.9 77.6
28 2.37 1.08 71.8 79.4 83.4
28.6 1-1/8 2.47 1.12 74.9 82.9 87
29 2.54 1.15 77 85.2 89.5
30 2.72 1.23 82.4 91.2 95.8
31 2.9 1.32 88 97.4 102.3
32 1-1/4 3.1 1.4 93.8 103.7 109
33 3.29 1.49 99.7 110.3 115.9
34 3.49 1.59 105.9 117.1 123
35 1-3/8 3.7 1.68 112.2 124.1 130.4
36 3.92 1.78 118.7 131.3 137.9
38 1-1/2 4.36 1.98 132.3 146.3 153.7
40 4.84 2.19 146.5 162.1 170.3
41.3 1-5/8 5.16 2.34 156.2 172.8 181.5
42 5.33 2.42 161.6 178.7 187.7
44 5.85 2.66 177.3 196.1 206
45 1-3/4 6.12 2.78 185.5 205.1 215.5
46 6.4 2.9 193.8 214.4 225.2
47.5 1-7/8 6.82 3.09 206.6 228.6 240.1
48 6.96 3.16 211 233.4 245.2
50 2 7.56 3.43 229 253.3 266.1
52 8.17 3.71 247.7 273.9 287.8
54 2-1/8 8.81 4 267.1 295.4 310.3
56 9.48 4.3 287.2 317.7
58 10.17 4.61 308.1 340.8
60 2-3/8 10.88 4.94 329.7 364.7
Nominalrope diameter
Approx mass
Minimum breaking force
Rope grade
1770 1960 2160
mm* Inch kg/m kN t kN t kN t
8 5/16 0.288 52.1 5.3 57.7 5.9 60.6 6.2
9 0.364 66.0 6.7 73.0 7.4 76.7 7.8
10 0.450 81.5 8.3 90.1 9.2 94.7 9.6
11 7/16 0.544 98.6 10 109.1 11.1 114.6 11.7
12 0.648 117.3 12 129.8 13.2 136.3 13.9
12.7 1/2 0.726 131.4 13.4 145.4 14.8 152.7 15.6
13 0.760 137.7 14 152.3 15.5 160.0 16.3
14 0.882 159.7 16.3 176.7 18 185.6 18.9
15 1.012 183.3 18.7 202.8 20.7 213.0 21.7
16 5/8 1.152 208.6 21.3 230.7 23.5 242.4 24.7
17 1.300 235.5 24 260.5 26.5 273.6 27.9
18 1.457 264.0 26.9 292.0 29.8 306.8 31.3
19 3/4 1.624 294.2 30 325.4 33.2 341.8 34.8
20 1.799 325.9 33.2 360.5 36.7 378.7 38.6
21 1.984 359.3 36.6 397.5 40.5 417.5 42.5
22 2.177 394.4 40.2 436.2 44.5 458.3 46.7
22.4 2.257 408.9 41.7 452.2 46.1 475.1 48.4
23 2.380 431.0 43.9 476.8 48.6 500.9 51
24 2.591 469.3 47.8 519.1 52.9 545.4 55.6
25 2.812 509.3 51.9 563.3 57.4 591.8 60.3
25.4 1 2.902 525.7 53.6 581.5 59.3 610.8 62.2
26 3.041 550.8 56.1 609.3 62.1 640.0 65.2
27 3.279 594.0 60.5 657.0 67 690.2 70.3
28 3.527 638.8 65.1 706.6 72 742.3 75.6
28.6 1-1/8 3.680 666.5 67.9 737.2 75.1 774.5 78.9
29 3.783 685.3 69.8 758.0 77.2 796.3 81.1
30 4.049 733.4 74.7 811.1 82.7 852.1 86.8
31 4.323 783.1 79.8 866.1 88.3 909.9 92.7
32 1-1/4 4.606 834.4 85 922.9 94 969.5 98.8
33 4.899 887.4 90.4 981.5 100 1031 105.1
34 5.200 941.9 96 1042 106.2 1095 111.5
35 1-3/8 5.511 998.2 101.7 1104 112.5 1160 118.2
36 5.830 1056 107.6 1168 119 1227 125
38 1-1/2 6.496 1177 119.9 1301 132.6 1367 139.3
40 7.198 1304 132.9 1442 146.9 1515 154.4
41.3 1-5/8 7.673 1390 141.6 1537 156.7 1615 164.6
42 7.935 1437 146.5 1590 162 1670 170.2
44 8.709 1578 160.7 1745 177.8 1833 186.8
45 1-3/4 9.109 1650 168.1 1825 186 1917 195.4
46 9.519 1724 175.7 1907 194.3 2003 204.2
47.5 1-7/8 10.150 1838 187.3 2034 207.2 2136 217.7
48 10.364 1877 191.3 2077 211.6 2181 222.3
50 2 11.246 2037 207.6 2253 229.6 2367 241.2
52 12.164 2203 224.5 2437 248.3 2560 260.9
54 2-1/8 13.117 2376 242.1 2628 267.8 2761 281.3
56 14.107 2555 260.4 2826 288
58 15.133 2741 279.3 3032 309
60 2-3/8 16.194 2933 298.9 3245 330.6
verotech 10
verotech 10Combines unmatched bending fatigue resistance with excellent breaking strength.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill
fact
or 0
.732
• L
ay ty
pe: O
rdin
ary
Lay
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s, s
igna
ling
disc
ard
of ro
pe a
cc. I
SO
430
9: R
CN
=11
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
6 0.178 34.9 3.6 38.0 3.9
7 0.242 47.5 4.8 51.7 5.3
8 5/16 0.316 62.0 6.3 67.6 6.9
9 0.400 78.5 8.0 85.5 8.7
10 0.494 96.9 9.9 105.6 10.8
11 7/16 0.598 117.3 12.0 127.7 13.0
12 0.712 139.5 14.2 152.0 15.5
12.7 1/2 0.797 156.3 15.9 170.2 17.4
13 0.836 163.8 16.7 178.4 18.2
14 0.969 189.9 19.4 206.9 21.1
15 1.112 218.0 22.2 237.5 24.2
16 5/8 1.266 248.1 25.3 270.2 27.6
17 1.429 280.1 28.6 305.1 31.1
18 1.602 314.0 32.0 342.0 34.9
19 3/4 1.785 349.8 35.7 381.0 38.9
20 1.978 387.6 39.5 422.2 43.1
21 2.180 427.4 43.6 465.5 47.5
22 2.393 469.0 47.8 510.9 52.1
22.2 7/8 2.437 477.6 48.7 520.2 53.0
23 2.616 512.6 52.3 558.4 56.9
24 2.848 558.2 56.9 608.0 62.0
25 3.090 605.7 61.8 659.7 67.3
25.4 1 3.190 625.2 63.8 681.0 69.4
26 3.342 655.1 66.8 713.5 72.8
27 3.604 706.5 72.0 769.5 78.5
28 3.876 759.8 77.5 827.5 84.4
28.6 1-1/8 4.044 792.7 80.8 863.4 88.0
29 4.158 815.0 83.1 887.7 90.5
30 4.450 872.2 88.9 950.0 96.9
31 4.751 931.3 95.0 1014 103.4
32 1-1/4 5.063 992.3 101.2 1081 110.2
33 5.384 1055 107.6 1149 117.2
34 5.716 1120 114.2 1220 124.4
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
6 0.12 0.05 3.9 4.3
7 0.16 0.07 5.3 5.8
8 5/16 0.21 0.10 7.0 7.6
9 0.27 0.12 8.8 9.6
10 0.33 0.15 10.9 11.9
11 7/16 0.40 0.18 13.2 14.4
12 0.48 0.22 15.7 17.1
12.7 1/2 0.54 0.24 17.6 19.1
13 0.56 0.25 18.4 20.1
14 0.65 0.30 21.3 23.3
15 0.75 0.34 24.5 26.7
16 5/8 0.85 0.39 27.9 30.4
17 0.96 0.44 31.5 34.3
18 1.08 0.49 35.3 38.4
19 3/4 1.20 0.54 39.3 42.8
20 1.33 0.60 43.6 47.5
21 1.47 0.66 48.0 52.3
22 1.61 0.73 52.7 57.4
22.2 7/8 1.64 0.74 53.7 58.5
23 1.76 0.80 57.6 62.8
24 1.91 0.87 62.7 68.3
25 2.08 0.94 68.1 74.2
25.4 1 2.14 0.97 70.3 76.5
26 2.25 1.02 73.6 80.2
27 2.42 1.10 79.4 86.5
28 2.60 1.18 85.4 93.0
28.6 1-1/8 2.72 1.23 89.1 97.0
29 2.79 1.27 91.6 99.8
30 2.99 1.36 98.0 106.8
31 3.19 1.45 104.7 114.0
32 1-1/4 3.40 1.54 111.5 121.5
33 3.62 1.64 118.6 129.2
34 3.84 1.74 125.9 137.2
veropro 8
veropro 8
Rope with very high structural stability, achieves excellent bending fatigue results.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill f
acto
r 0.6
66 •
Ord
inar
y or
Lan
g La
y av
aila
ble
• R
ope
Cat
egor
y N
umbe
r (R
CN
) to
det
erm
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s, s
igna
ling
disc
ard
of ro
pe a
cc. I
SO
430
9 •
Nom
inal
rope
dia
met
er ti
ll 42
mm
RC
N=
09 •
Nom
inal
rope
dia
met
er 4
3mm
to 4
8mm
RC
N=1
1 N
omin
al ro
pe d
iam
eter
abo
ve 4
8mm
RC
N=1
3 •
Furt
her d
etai
ls: w
ww
.ver
ope.
com
/en/
RC
N
Nominalrope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1770 1960 2160mm* Inch lb/ft1 kg/ft1
8 5/16 0.19 0.09 5.9 6.5 6.8
9 0.24 0.11 7.4 8.2 8.6
10 0.3 0.14 9.2 10.1 10.6
11 7/16 0.37 0.17 11.1 12.3 12.9
12 0.44 0.2 13.2 14.6 15.3
12.7 1/2 0.49 0.22 14.8 16.3 17.2
13 0.51 0.23 15.5 17.1 18
14 0.59 0.27 18 19.9 20.9
15 0.68 0.31 20.6 22.8 23.9
16 5/8 0.77 0.35 23.4 25.9 27.2
17 0.87 0.4 26.5 29.3 30.8
18 0.98 0.44 29.7 32.8 34.5
19 3/4 1.09 0.5 33.1 36.6 38.4
20 1.21 0.55 36.6 40.5 42.6
21 1.33 0.6 40.4 44.7 46.9
22 1.46 0.66 44.3 49 51.5
22.4 1.52 0.69 46 50.8 53.4
23 1.6 0.73 48.4 53.6 56.3
24 1.74 0.79 52.8 58.4 61.3
25 1.89 0.86 57.2 63.3 66.5
25.4 1 1.95 0.88 59.1 65.4 68.7
26 2.04 0.93 61.9 68.5 71.9
27 2.2 1 66.8 73.9 77.6
28 2.37 1.08 71.8 79.4 83.4
28.6 1-1/8 2.47 1.12 74.9 82.9 87
29 2.54 1.15 77 85.2 89.5
30 2.72 1.23 82.4 91.2 95.8
31 2.9 1.32 88 97.4 102.3
32 1-1/4 3.1 1.4 93.8 103.7 109
33 3.29 1.49 99.7 110.3 115.9
34 3.49 1.59 105.9 117.1 123
35 1-3/8 3.7 1.68 112.2 124.1 130.4
36 3.92 1.78 118.7 131.3 137.9
38 1-1/2 4.36 1.98 132.3 146.3 153.7
40 4.84 2.19 146.5 162.1 170.3
41.3 1-5/8 5.16 2.34 156.2 172.8 181.5
42 5.33 2.42 161.6 178.7 187.7
44 5.85 2.66 177.3 196.1 206
45 1-3/4 6.12 2.78 185.5 205.1 215.5
46 6.4 2.9 193.8 214.4 225.2
47.5 1-7/8 6.82 3.09 206.6 228.6 240.1
48 6.96 3.16 211 233.4 245.2
50 2 7.56 3.43 229 253.3 266.1
52 8.17 3.71 247.7 273.9 287.8
54 2-1/8 8.81 4 267.1 295.4 310.3
56 9.48 4.3 287.2 317.7
58 10.17 4.61 308.1 340.8
60 2-3/8 10.88 4.94 329.7 364.7
Nominalrope diameter
Approx mass
Minimum breaking force
Rope grade
1770 1960 2160
mm* Inch kg/m kN t kN t kN t
8 5/16 0.288 52.1 5.3 57.7 5.9 60.6 6.2
9 0.364 66.0 6.7 73.0 7.4 76.7 7.8
10 0.450 81.5 8.3 90.1 9.2 94.7 9.6
11 7/16 0.544 98.6 10 109.1 11.1 114.6 11.7
12 0.648 117.3 12 129.8 13.2 136.3 13.9
12.7 1/2 0.726 131.4 13.4 145.4 14.8 152.7 15.6
13 0.760 137.7 14 152.3 15.5 160.0 16.3
14 0.882 159.7 16.3 176.7 18 185.6 18.9
15 1.012 183.3 18.7 202.8 20.7 213.0 21.7
16 5/8 1.152 208.6 21.3 230.7 23.5 242.4 24.7
17 1.300 235.5 24 260.5 26.5 273.6 27.9
18 1.457 264.0 26.9 292.0 29.8 306.8 31.3
19 3/4 1.624 294.2 30 325.4 33.2 341.8 34.8
20 1.799 325.9 33.2 360.5 36.7 378.7 38.6
21 1.984 359.3 36.6 397.5 40.5 417.5 42.5
22 2.177 394.4 40.2 436.2 44.5 458.3 46.7
22.4 2.257 408.9 41.7 452.2 46.1 475.1 48.4
23 2.380 431.0 43.9 476.8 48.6 500.9 51
24 2.591 469.3 47.8 519.1 52.9 545.4 55.6
25 2.812 509.3 51.9 563.3 57.4 591.8 60.3
25.4 1 2.902 525.7 53.6 581.5 59.3 610.8 62.2
26 3.041 550.8 56.1 609.3 62.1 640.0 65.2
27 3.279 594.0 60.5 657.0 67 690.2 70.3
28 3.527 638.8 65.1 706.6 72 742.3 75.6
28.6 1-1/8 3.680 666.5 67.9 737.2 75.1 774.5 78.9
29 3.783 685.3 69.8 758.0 77.2 796.3 81.1
30 4.049 733.4 74.7 811.1 82.7 852.1 86.8
31 4.323 783.1 79.8 866.1 88.3 909.9 92.7
32 1-1/4 4.606 834.4 85 922.9 94 969.5 98.8
33 4.899 887.4 90.4 981.5 100 1031 105.1
34 5.200 941.9 96 1042 106.2 1095 111.5
35 1-3/8 5.511 998.2 101.7 1104 112.5 1160 118.2
36 5.830 1056 107.6 1168 119 1227 125
38 1-1/2 6.496 1177 119.9 1301 132.6 1367 139.3
40 7.198 1304 132.9 1442 146.9 1515 154.4
41.3 1-5/8 7.673 1390 141.6 1537 156.7 1615 164.6
42 7.935 1437 146.5 1590 162 1670 170.2
44 8.709 1578 160.7 1745 177.8 1833 186.8
45 1-3/4 9.109 1650 168.1 1825 186 1917 195.4
46 9.519 1724 175.7 1907 194.3 2003 204.2
47.5 1-7/8 10.150 1838 187.3 2034 207.2 2136 217.7
48 10.364 1877 191.3 2077 211.6 2181 222.3
50 2 11.246 2037 207.6 2253 229.6 2367 241.2
52 12.164 2203 224.5 2437 248.3 2560 260.9
54 2-1/8 13.117 2376 242.1 2628 267.8 2761 281.3
56 14.107 2555 260.4 2826 288
58 15.133 2741 279.3 3032 309
60 2-3/8 16.194 2933 298.9 3245 330.6
verotech 10
verotech 10Combines unmatched bending fatigue resistance with excellent breaking strength.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill
fact
or 0
.732
• L
ay ty
pe: O
rdin
ary
Lay
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s, s
igna
ling
disc
ard
of ro
pe a
cc. I
SO
430
9: R
CN
=11
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
6 0.178 34.9 3.6 38.0 3.9
7 0.242 47.5 4.8 51.7 5.3
8 5/16 0.316 62.0 6.3 67.6 6.9
9 0.400 78.5 8.0 85.5 8.7
10 0.494 96.9 9.9 105.6 10.8
11 7/16 0.598 117.3 12.0 127.7 13.0
12 0.712 139.5 14.2 152.0 15.5
12.7 1/2 0.797 156.3 15.9 170.2 17.4
13 0.836 163.8 16.7 178.4 18.2
14 0.969 189.9 19.4 206.9 21.1
15 1.112 218.0 22.2 237.5 24.2
16 5/8 1.266 248.1 25.3 270.2 27.6
17 1.429 280.1 28.6 305.1 31.1
18 1.602 314.0 32.0 342.0 34.9
19 3/4 1.785 349.8 35.7 381.0 38.9
20 1.978 387.6 39.5 422.2 43.1
21 2.180 427.4 43.6 465.5 47.5
22 2.393 469.0 47.8 510.9 52.1
22.2 7/8 2.437 477.6 48.7 520.2 53.0
23 2.616 512.6 52.3 558.4 56.9
24 2.848 558.2 56.9 608.0 62.0
25 3.090 605.7 61.8 659.7 67.3
25.4 1 3.190 625.2 63.8 681.0 69.4
26 3.342 655.1 66.8 713.5 72.8
27 3.604 706.5 72.0 769.5 78.5
28 3.876 759.8 77.5 827.5 84.4
28.6 1-1/8 4.044 792.7 80.8 863.4 88.0
29 4.158 815.0 83.1 887.7 90.5
30 4.450 872.2 88.9 950.0 96.9
31 4.751 931.3 95.0 1014 103.4
32 1-1/4 5.063 992.3 101.2 1081 110.2
33 5.384 1055 107.6 1149 117.2
34 5.716 1120 114.2 1220 124.4
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
6 0.12 0.05 3.9 4.3
7 0.16 0.07 5.3 5.8
8 5/16 0.21 0.10 7.0 7.6
9 0.27 0.12 8.8 9.6
10 0.33 0.15 10.9 11.9
11 7/16 0.40 0.18 13.2 14.4
12 0.48 0.22 15.7 17.1
12.7 1/2 0.54 0.24 17.6 19.1
13 0.56 0.25 18.4 20.1
14 0.65 0.30 21.3 23.3
15 0.75 0.34 24.5 26.7
16 5/8 0.85 0.39 27.9 30.4
17 0.96 0.44 31.5 34.3
18 1.08 0.49 35.3 38.4
19 3/4 1.20 0.54 39.3 42.8
20 1.33 0.60 43.6 47.5
21 1.47 0.66 48.0 52.3
22 1.61 0.73 52.7 57.4
22.2 7/8 1.64 0.74 53.7 58.5
23 1.76 0.80 57.6 62.8
24 1.91 0.87 62.7 68.3
25 2.08 0.94 68.1 74.2
25.4 1 2.14 0.97 70.3 76.5
26 2.25 1.02 73.6 80.2
27 2.42 1.10 79.4 86.5
28 2.60 1.18 85.4 93.0
28.6 1-1/8 2.72 1.23 89.1 97.0
29 2.79 1.27 91.6 99.8
30 2.99 1.36 98.0 106.8
31 3.19 1.45 104.7 114.0
32 1-1/4 3.40 1.54 111.5 121.5
33 3.62 1.64 118.6 129.2
34 3.84 1.74 125.9 137.2
verosteel 8
verosteel 8Offers best general properties at high ambient temperatures.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill f
acto
r 0.7
02 •
Ord
inar
y or
Lan
g La
y av
aila
ble
• R
ope
Cat
egor
y N
umbe
r to
dete
rmin
e th
e nu
mbe
r of v
isib
le b
roke
n ou
ter w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309
• N
omin
al ro
pe d
iam
eter
till
42m
m R
CN
=09
• N
omin
al ro
pe d
iam
eter
43m
m to
48m
m R
CN
=11
Nom
inal
rope
dia
met
er a
bove
48m
m R
CN
=13
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
16 5/8 1.164 235.1 24 254.4 25.9
17 1.315 265.5 27.1 287.2 29.3
18 1.474 297.6 30.3 322.0 32.8
19 3/4 1.642 331.6 33.8 358.7 36.6
20 1.819 367.4 37.4 397.5 40.5
21 2.006 405.1 41.3 438.2 44.7
22 2.202 444.6 45.3 481.0 49
23 2.406 485.9 49.5 525.7 53.6
24 2.620 529.1 53.9 572.4 58.3
25 2.843 574.1 58.5 621.1 63.3
26 3.075 620.9 63.3 671.7 68.5
27 3.316 669.6 68.2 724.4 73.8
28 3.566 720.1 73.4 779.1 79.4
29 3.825 772.5 78.7 835.7 85.2
30 4.094 826.7 84.2 894.3 91.1
31 4.371 882.7 89.9 954.9 97.3
32 1-1/4 4.658 940.6 95.8 1018 103.7
33 4.953 1000 101.9 1082 110.3
34 5.258 1062 108.2 1149 117.1
35 1-3/8 5.572 1125 114.7 1217 124
36 5.895 1190 121.3 1288 131.2
37 6.227 1257 128.1 1360 138.6
38 1-1/2 6.568 1326 135.2 1435 146.2
39 6.918 1397 142.4 1511 154
40 7.278 1470 149.8 1590 162
41 7.646 1544 157.3 1670 170.2
42 8.024 1620 165.1 1753 178.6
43 8.410 1698 173.1 1837 187.2
44 8.806 1778 181.2 1924 196
45 1-3/4 9.211 1860 189.5 2012 205
46 9.625 1944 198.1 2103 214.3
47 10.05 2029 206.8 2195 223.7
48 10.48 2116 215.7 2289 233.3
49 10.92 2205 224.7 2386 243.1
50 2 11.37 2296 234 2484 253.1
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
16 5/8 0.78 0.36 26.4 28.6
17 0.88 0.4 29.8 32.3
18 0.99 0.45 33.5 36.2
19 3/4 1.1 0.5 37.3 40.3
20 1.22 0.55 41.3 44.7
21 1.35 0.61 45.5 49.3
22 1.48 0.67 50 54.1
23 1.62 0.73 54.6 59.1
24 1.76 0.8 59.5 64.3
25 1.91 0.87 64.5 69.8
26 2.07 0.94 69.8 75.5
27 2.23 1.01 75.3 81.4
28 2.4 1.09 80.9 87.6
29 2.57 1.17 86.8 93.9
30 2.75 1.25 92.9 100.5
31 2.94 1.33 99.2 107.3
32 1-1/4 3.13 1.42 105.7 114.4
33 3.33 1.51 112.4 121.6
34 3.53 1.6 119.4 129.1
35 1-3/8 3.74 1.7 126.5 136.8
36 3.96 1.8 133.8 144.8
37 4.18 1.9 141.3 152.9
38 1-1/2 4.41 2 149.1 161.3
39 4.65 2.11 157 169.9
40 4.89 2.22 165.2 178.7
41 5.14 2.33 173.6 187.8
42 5.39 2.45 182.1 197
43 5.65 2.56 190.9 206.5
44 5.92 2.68 199.9 216.2
45 1-3/4 6.19 2.81 209.1 226.2
46 6.47 2.93 218.5 236.3
47 6.75 3.06 228.1 246.7
48 7.04 3.2 237.9 257.3
49 7.34 3.33 247.9 268.2
50 2 7.64 3.47 258.1 279.2
veropower 8
veropower 8Provides the highest breaking strength of all non-rotation resistant ropes and offers superior resistance to drum crushing.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill f
acto
r 0.7
47 •
Lay
type
: Ord
inar
y La
y •
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s, s
igna
ling
disc
ard
of ro
pe a
cc. I
SO
430
9 •
Nom
inal
rope
dia
met
er ti
ll 40m
m R
CN
=09
• N
omin
al ro
pe d
iam
eter
41m
m to
46m
m R
CN
=11
Nom
inal
rope
dia
met
er a
bove
46m
m R
CN
=13
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
12 0.717 147.4 15 158.8 16.2
12.7 1/2 0.803 165.1 16.8 177.9 18.1
13 0.842 173.0 17.6 186.4 19
14 0.976 200.6 20.4 216.2 22
15 1.121 230.3 23.5 248.2 25.3
16 5/8 1.275 262.0 26.7 282.3 28.8
17 1.440 295.8 30.1 318.7 32.5
18 1.614 331.6 33.8 357.3 36.4
19 3/4 1.798 369.5 37.6 398.1 40.6
20 1.992 409.4 41.7 441.2 45
21 2.197 451.3 46 486.4 49.6
22 2.411 495.3 50.5 533.8 54.4
22.4 2.499 513.5 52.3 553.4 56.4
23 2.635 541.4 55.2 583.4 59.5
24 2.869 589.5 60.1 635.3 64.7
25 3.113 639.6 65.2 689.3 70.2
25.4 1 3.214 660.3 67.3 711.5 72.5
26 3.367 691.8 70.5 745.6 76
27 3.631 746.1 76 804.0 81.9
28 3.905 802.4 81.8 864.7 88.1
28.6 1-1/8 4.074 837.1 85.3 902.1 91.9
29 4.189 860.7 87.7 927.5 94.5
30 4.483 921.1 93.9 992.6 101.1
31 4.787 983.5 100.2 1060 108
32 1-1/4 5.101 1048 106.8 1129 115.1
33 5.424 1115 113.6 1201 122.4
34 5.758 1183 120.6 1275 129.9
35 1-3/8 6.102 1254 127.8 1351 137.7
36 6.455 1326 135.2 1429 145.7
38 1-1/2 7.193 1478 150.6 1593 162.3
40 7.970 1637 166.9 1765 179.8
41.3 1-5/8 8.496 1746 177.9 1881 191.7
42 8.787 1805 184 1946 198.2
44 9.643 1981 201.9 2135 217.6
45 1-3/4 10.09 2072 211.2 2233 227.6
46 10.54 2166 220.7 2334 237.8
47.5 1-7/8 11.24 2309 235.3 2488 253.6
48 11.48 2358 240.3 2541 258.9
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
12 0.48 0.22 16.6 17.9
12.7 1/2 0.54 0.24 18.6 20
13 0.57 0.26 19.4 21
14 0.66 0.3 22.5 24.3
15 0.75 0.34 25.9 27.9
16 5/8 0.86 0.39 29.4 31.7
17 0.97 0.44 33.2 35.8
18 1.08 0.49 37.3 40.2
19 3/4 1.21 0.55 41.5 44.8
20 1.34 0.61 46 49.6
21 1.48 0.67 50.7 54.7
22 1.62 0.74 55.7 60
22.4 1.68 0.76 57.7 62.2
23 1.77 0.8 60.9 65.6
24 1.93 0.87 66.3 71.4
25 2.09 0.95 71.9 77.5
25.4 1 2.16 0.98 74.2 80
26 2.26 1.03 77.8 83.8
27 2.44 1.11 83.9 90.4
28 2.62 1.19 90.2 97.2
28.6 1-1/8 2.74 1.24 94.1 101.4
29 2.81 1.28 96.7 104.3
30 3.01 1.37 103.5 111.6
31 3.22 1.46 110.5 119.1
32 1-1/4 3.43 1.56 117.8 126.9
33 3.64 1.65 125.3 135
34 3.87 1.76 133 143.3
35 1-3/8 4.1 1.86 140.9 151.9
36 4.34 1.97 149.1 160.7
38 1-1/2 4.83 2.19 166.1 179
40 5.36 2.43 184.1 198.3
41.3 1-5/8 5.71 2.59 196.2 211.4
42 5.9 2.68 202.9 218.7
44 6.48 2.94 222.7 240
45 1-3/4 6.78 3.08 232.9 251
46 7.08 3.21 243.4 262.3
47.5 1-7/8 7.55 3.43 259.5 279.7
48 7.71 3.5 265 285.6
verosteel 8
verosteel 8Offers best general properties at high ambient temperatures.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill f
acto
r 0.7
02 •
Ord
inar
y or
Lan
g La
y av
aila
ble
• R
ope
Cat
egor
y N
umbe
r to
dete
rmin
e th
e nu
mbe
r of v
isib
le b
roke
n ou
ter w
ires,
sig
nalin
g di
scar
d of
rope
acc
. IS
O 4
309
• N
omin
al ro
pe d
iam
eter
till
42m
m R
CN
=09
• N
omin
al ro
pe d
iam
eter
43m
m to
48m
m R
CN
=11
Nom
inal
rope
dia
met
er a
bove
48m
m R
CN
=13
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
16 5/8 1.164 235.1 24 254.4 25.9
17 1.315 265.5 27.1 287.2 29.3
18 1.474 297.6 30.3 322.0 32.8
19 3/4 1.642 331.6 33.8 358.7 36.6
20 1.819 367.4 37.4 397.5 40.5
21 2.006 405.1 41.3 438.2 44.7
22 2.202 444.6 45.3 481.0 49
23 2.406 485.9 49.5 525.7 53.6
24 2.620 529.1 53.9 572.4 58.3
25 2.843 574.1 58.5 621.1 63.3
26 3.075 620.9 63.3 671.7 68.5
27 3.316 669.6 68.2 724.4 73.8
28 3.566 720.1 73.4 779.1 79.4
29 3.825 772.5 78.7 835.7 85.2
30 4.094 826.7 84.2 894.3 91.1
31 4.371 882.7 89.9 954.9 97.3
32 1-1/4 4.658 940.6 95.8 1018 103.7
33 4.953 1000 101.9 1082 110.3
34 5.258 1062 108.2 1149 117.1
35 1-3/8 5.572 1125 114.7 1217 124
36 5.895 1190 121.3 1288 131.2
37 6.227 1257 128.1 1360 138.6
38 1-1/2 6.568 1326 135.2 1435 146.2
39 6.918 1397 142.4 1511 154
40 7.278 1470 149.8 1590 162
41 7.646 1544 157.3 1670 170.2
42 8.024 1620 165.1 1753 178.6
43 8.410 1698 173.1 1837 187.2
44 8.806 1778 181.2 1924 196
45 1-3/4 9.211 1860 189.5 2012 205
46 9.625 1944 198.1 2103 214.3
47 10.05 2029 206.8 2195 223.7
48 10.48 2116 215.7 2289 233.3
49 10.92 2205 224.7 2386 243.1
50 2 11.37 2296 234 2484 253.1
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
16 5/8 0.78 0.36 26.4 28.6
17 0.88 0.4 29.8 32.3
18 0.99 0.45 33.5 36.2
19 3/4 1.1 0.5 37.3 40.3
20 1.22 0.55 41.3 44.7
21 1.35 0.61 45.5 49.3
22 1.48 0.67 50 54.1
23 1.62 0.73 54.6 59.1
24 1.76 0.8 59.5 64.3
25 1.91 0.87 64.5 69.8
26 2.07 0.94 69.8 75.5
27 2.23 1.01 75.3 81.4
28 2.4 1.09 80.9 87.6
29 2.57 1.17 86.8 93.9
30 2.75 1.25 92.9 100.5
31 2.94 1.33 99.2 107.3
32 1-1/4 3.13 1.42 105.7 114.4
33 3.33 1.51 112.4 121.6
34 3.53 1.6 119.4 129.1
35 1-3/8 3.74 1.7 126.5 136.8
36 3.96 1.8 133.8 144.8
37 4.18 1.9 141.3 152.9
38 1-1/2 4.41 2 149.1 161.3
39 4.65 2.11 157 169.9
40 4.89 2.22 165.2 178.7
41 5.14 2.33 173.6 187.8
42 5.39 2.45 182.1 197
43 5.65 2.56 190.9 206.5
44 5.92 2.68 199.9 216.2
45 1-3/4 6.19 2.81 209.1 226.2
46 6.47 2.93 218.5 236.3
47 6.75 3.06 228.1 246.7
48 7.04 3.2 237.9 257.3
49 7.34 3.33 247.9 268.2
50 2 7.64 3.47 258.1 279.2
veropower 8
veropower 8Provides the highest breaking strength of all non-rotation resistant ropes and offers superior resistance to drum crushing.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill f
acto
r 0.7
47 •
Lay
type
: Ord
inar
y La
y •
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s, s
igna
ling
disc
ard
of ro
pe a
cc. I
SO
430
9 •
Nom
inal
rope
dia
met
er ti
ll 40m
m R
CN
=09
• N
omin
al ro
pe d
iam
eter
41m
m to
46m
m R
CN
=11
Nom
inal
rope
dia
met
er a
bove
46m
m R
CN
=13
• Fu
rthe
r det
ails
: ww
w.v
erop
e.co
m/e
n/R
CN
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
12 0.717 147.4 15 158.8 16.2
12.7 1/2 0.803 165.1 16.8 177.9 18.1
13 0.842 173.0 17.6 186.4 19
14 0.976 200.6 20.4 216.2 22
15 1.121 230.3 23.5 248.2 25.3
16 5/8 1.275 262.0 26.7 282.3 28.8
17 1.440 295.8 30.1 318.7 32.5
18 1.614 331.6 33.8 357.3 36.4
19 3/4 1.798 369.5 37.6 398.1 40.6
20 1.992 409.4 41.7 441.2 45
21 2.197 451.3 46 486.4 49.6
22 2.411 495.3 50.5 533.8 54.4
22.4 2.499 513.5 52.3 553.4 56.4
23 2.635 541.4 55.2 583.4 59.5
24 2.869 589.5 60.1 635.3 64.7
25 3.113 639.6 65.2 689.3 70.2
25.4 1 3.214 660.3 67.3 711.5 72.5
26 3.367 691.8 70.5 745.6 76
27 3.631 746.1 76 804.0 81.9
28 3.905 802.4 81.8 864.7 88.1
28.6 1-1/8 4.074 837.1 85.3 902.1 91.9
29 4.189 860.7 87.7 927.5 94.5
30 4.483 921.1 93.9 992.6 101.1
31 4.787 983.5 100.2 1060 108
32 1-1/4 5.101 1048 106.8 1129 115.1
33 5.424 1115 113.6 1201 122.4
34 5.758 1183 120.6 1275 129.9
35 1-3/8 6.102 1254 127.8 1351 137.7
36 6.455 1326 135.2 1429 145.7
38 1-1/2 7.193 1478 150.6 1593 162.3
40 7.970 1637 166.9 1765 179.8
41.3 1-5/8 8.496 1746 177.9 1881 191.7
42 8.787 1805 184 1946 198.2
44 9.643 1981 201.9 2135 217.6
45 1-3/4 10.09 2072 211.2 2233 227.6
46 10.54 2166 220.7 2334 237.8
47.5 1-7/8 11.24 2309 235.3 2488 253.6
48 11.48 2358 240.3 2541 258.9
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
12 0.48 0.22 16.6 17.9
12.7 1/2 0.54 0.24 18.6 20
13 0.57 0.26 19.4 21
14 0.66 0.3 22.5 24.3
15 0.75 0.34 25.9 27.9
16 5/8 0.86 0.39 29.4 31.7
17 0.97 0.44 33.2 35.8
18 1.08 0.49 37.3 40.2
19 3/4 1.21 0.55 41.5 44.8
20 1.34 0.61 46 49.6
21 1.48 0.67 50.7 54.7
22 1.62 0.74 55.7 60
22.4 1.68 0.76 57.7 62.2
23 1.77 0.8 60.9 65.6
24 1.93 0.87 66.3 71.4
25 2.09 0.95 71.9 77.5
25.4 1 2.16 0.98 74.2 80
26 2.26 1.03 77.8 83.8
27 2.44 1.11 83.9 90.4
28 2.62 1.19 90.2 97.2
28.6 1-1/8 2.74 1.24 94.1 101.4
29 2.81 1.28 96.7 104.3
30 3.01 1.37 103.5 111.6
31 3.22 1.46 110.5 119.1
32 1-1/4 3.43 1.56 117.8 126.9
33 3.64 1.65 125.3 135
34 3.87 1.76 133 143.3
35 1-3/8 4.1 1.86 140.9 151.9
36 4.34 1.97 149.1 160.7
38 1-1/2 4.83 2.19 166.1 179
40 5.36 2.43 184.1 198.3
41.3 1-5/8 5.71 2.59 196.2 211.4
42 5.9 2.68 202.9 218.7
44 6.48 2.94 222.7 240
45 1-3/4 6.78 3.08 232.9 251
46 7.08 3.21 243.4 262.3
47.5 1-7/8 7.55 3.43 259.5 279.7
48 7.71 3.5 265 285.6
veropro 10
veropro 10Extremely flexible rope with very high breaking strength, achieves excellent bending fatigue results.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill
fact
or 0
.683
O
rdin
ary
or L
ang
Lay
avai
labl
e •
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s,
sign
alin
g di
scar
d of
rope
acc
. IS
O 4
309:
RC
N=1
1 •
Furt
her d
etai
ls: w
ww
.ver
ope.
com
/en/
RC
N
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
30 4.152 828.0 84.4 891.6 90.9
32 1-1/4 4.724 942.1 96 1014.4 103.4
34 5.333 1063.5 108.4 1145.2 116.7
36 5.979 1192.3 121.5 1283.9 130.8
38 1-1/2 6.662 1328.4 135.4 1430.5 145.8
40 7.381 1472.0 150 1585.1 161.5
42 8.138 1622.8 165.4 1747.5 178.1
44 8.931 1781.1 181.5 1917.9 195.4
46 9.762 1946.7 198.4 2096.3 213.6
48 10.629 2119.6 216 2282.5 232.6
50 2 11.533 2299.9 234.4 2476.7 252.4
52 12.474 2487.6 253.5 2678.8 273
54 2-1/8 13.452 2682.6 273.4 2888.8 294.4
56 14.467 2885.0 294 3106.8 316.6
58 15.519 3094.8 315.4 3332.6 339.6
60 2-3/8 16.608 3311.9 337.5 3566.4 363.4
62 17.733 3536.4 360.4 3808.1 388.1
64 2-1/2 18.896 3768.2 384 4057.8 413.5
66 2-5/8 20.095 4007.4 408.4 4315.4 439.7
68 21.332 4254.0 433.5 4580.9 466.8
70 2-3/4 22.605 4507.9 459.4 4854.3 494.7
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
30 2.79 1.27 93.1 100.2
32 1-1/4 3.17 1.44 105.9 114
34 3.58 1.63 119.5 128.7
36 4.02 1.82 134 144.3
38 1-1/2 4.48 2.03 149.3 160.8
40 4.96 2.25 165.4 178.2
42 5.47 2.48 182.4 196.4
44 6 2.72 200.2 215.6
46 6.56 2.98 218.8 235.6
48 7.14 3.24 238.2 256.6
50 2 7.75 3.52 258.5 278.4
52 8.38 3.8 279.6 301.1
54 2-1/8 9.04 4.1 301.5 324.7
56 9.72 4.41 324.3 349.2
58 10.43 4.73 347.9 374.6
60 2-3/8 11.16 5.06 372.3 400.9
62 11.92 5.41 397.5 428
64 2-1/2 12.7 5.76 423.5 456.1
66 2-5/8 13.5 6.13 450.4 485
68 14.33 6.5 478.1 514.9
70 2-3/4 15.19 6.89 506.7 545.6
veropro 10
veropro 10Extremely flexible rope with very high breaking strength, achieves excellent bending fatigue results.
Errors and omissions excepted! The cross-section shows a typical rope diameter and can vary within the range. Subject to modifications, this may change the specifications. Relevant is our website.
1) The values are indicative only. Authoritative figures remain the metric ones!* Standard tolerance: +2% to +4%, other tolerances possible upon agreement. Other and special rope diameters are available upon request.
The
rope
is fu
lly lu
bric
ated
. The
fini
sh a
vaila
ble
as s
tand
ard
is g
alva
nize
d, b
right
fini
sh o
n re
ques
t. •
Ave
rage
fill
fact
or 0
.683
O
rdin
ary
or L
ang
Lay
avai
labl
e •
Rop
e C
ateg
ory
Num
ber (
RC
N) t
o de
term
ine
the
num
ber o
f vis
ible
bro
ken
oute
r wire
s,
sign
alin
g di
scar
d of
rope
acc
. IS
O 4
309:
RC
N=1
1 •
Furt
her d
etai
ls: w
ww
.ver
ope.
com
/en/
RC
N
Nominal rope diameter
Approx mass
Minimum breaking force
Rope grade
1960 2160
mm* Inch kg/m kN t kN t
30 4.152 828.0 84.4 891.6 90.9
32 1-1/4 4.724 942.1 96 1014.4 103.4
34 5.333 1063.5 108.4 1145.2 116.7
36 5.979 1192.3 121.5 1283.9 130.8
38 1-1/2 6.662 1328.4 135.4 1430.5 145.8
40 7.381 1472.0 150 1585.1 161.5
42 8.138 1622.8 165.4 1747.5 178.1
44 8.931 1781.1 181.5 1917.9 195.4
46 9.762 1946.7 198.4 2096.3 213.6
48 10.629 2119.6 216 2282.5 232.6
50 2 11.533 2299.9 234.4 2476.7 252.4
52 12.474 2487.6 253.5 2678.8 273
54 2-1/8 13.452 2682.6 273.4 2888.8 294.4
56 14.467 2885.0 294 3106.8 316.6
58 15.519 3094.8 315.4 3332.6 339.6
60 2-3/8 16.608 3311.9 337.5 3566.4 363.4
62 17.733 3536.4 360.4 3808.1 388.1
64 2-1/2 18.896 3768.2 384 4057.8 413.5
66 2-5/8 20.095 4007.4 408.4 4315.4 439.7
68 21.332 4254.0 433.5 4580.9 466.8
70 2-3/4 22.605 4507.9 459.4 4854.3 494.7
Nominal rope diameter
Approx mass
Minimum breaking force tons1 of 2000 lbs
Rope grade
1960 2160mm* Inch lb/ft1 kg/ft1
30 2.79 1.27 93.1 100.2
32 1-1/4 3.17 1.44 105.9 114
34 3.58 1.63 119.5 128.7
36 4.02 1.82 134 144.3
38 1-1/2 4.48 2.03 149.3 160.8
40 4.96 2.25 165.4 178.2
42 5.47 2.48 182.4 196.4
44 6 2.72 200.2 215.6
46 6.56 2.98 218.8 235.6
48 7.14 3.24 238.2 256.6
50 2 7.75 3.52 258.5 278.4
52 8.38 3.8 279.6 301.1
54 2-1/8 9.04 4.1 301.5 324.7
56 9.72 4.41 324.3 349.2
58 10.43 4.73 347.9 374.6
60 2-3/8 11.16 5.06 372.3 400.9
62 11.92 5.41 397.5 428
64 2-1/2 12.7 5.76 423.5 456.1
66 2-5/8 13.5 6.13 450.4 485
68 14.33 6.5 478.1 514.9
70 2-3/4 15.19 6.89 506.7 545.6
With our stock-keeping program at the different verope service centers, we are able to bridge the distance between our modern rope production facility and joint venture partner Kiswire in both South Korea and Malaysia and our customers day to day requirements locally.
Our service and logistics centers in• Contwig, Germany• Shanghai, China• Singapore• Houston, USA• Resende, Brasil• Mumbai & New Delhi, India are able to turn on short notice any inquiries into action.
Worldwide serviceand distribution
verope has a worldwide network of professional dealers who expertly select the correct high performance rope to suit your requirements regionally.
St. Antons-Gasse 4aCH-6300 Zug / SwitzerlandTel: + 41 (0) 41 72 80 880Fax: + 41 (0) 41 72 80 888