18- 1
DESCRIPTION
18- 1. Housekeeping Items. I’m at a bit of a loss at how to proceed. Attendance is spotty at best. Six or so people share in class; the rest sit like bumps on a log, though some are attentive bumps. A number fiddle with their phones or laptops. - PowerPoint PPT PresentationTRANSCRIPT
© 2010 Pearson Education Canada
18Managing Our Waste
PowerPoint® Slides prepared by Stephen Turnbull
Copyright © 2013 Pearson Canada Inc.
18-1
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Housekeeping Items
• I’m at a bit of a loss at how to proceed. Attendance is spotty at best. Six or so people share in class; the rest sit like bumps on a log, though some are attentive bumps. A number fiddle with their phones or laptops.
• So you tell me what you want to do for the rest of the semester. The issues we’re talking about are the issues your generation is going to inherit. I’m going to be dead or very old when things get really bad, but you’re going to be right in the middle of it, so I hope you would care about it.
• I will post the notes about waste management on the web. We can watch a film about the history and impacts of plastic or about ecological design that eliminates waste and toxics in the environment. We can critique the class, we can talk about whatever you like….
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Upon successfully completing this chapter, you will be able to
• Summarize and compare the types of waste we generate
• List the major approaches to managing waste
• Delineate the scale of the waste dilemma
• Describe conventional waste disposal methods: landfills and incineration
• Evaluate approaches for reducing waste: source reduction, reuse, composting, and recycling
• Discuss industrial solid waste management and principles of industrial ecology
• Assess issues in managing hazardous waste
18-3
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Central Case:The Beare Road Landfill: Making Good Use of Old Garbage
• 1968 - 1983: The Beare Road pit received municipal garbage for Toronto’s ever-increasing garbage
• 1983: landscape restoration was undertaken
• 1996: began to collect the methane-rich gas being generated by the decomposting garbage (LFGTE, landfill gas-to-electricity); Nanaimo has a pilot project to do the same
“We can’t have an economy that uses our air, water, and soil as a garbage can.”
–David Suzuki
18-4
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Approaches to Waste Managment
18-5
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Approaches to waste management
• Municipal solid waste = non-liquid waste that comes from homes, institutions, and small businesses
• Industrial solid waste = waste from production of consumer goods, mining, agriculture, and petroleum extraction and refining
• Hazardous waste = solid or liquid waste that is toxic, chemically reactive, flammable, or corrosive
• Wastewater = water used in a household, business, or industry, as well as polluted runoff from our streets and storm drains
18-6
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
We have several aims in managing waste
• Three main components of waste management
- Minimizing the amount of waste we generate (source reduction)
- Recovering waste materials and finding ways to recycle them
- Disposing of waste safely and effectively
18-7
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
18-8
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
We have several aims in managing waste (cont’d)
• Waste stream = flow of waste as it moves from its sources toward disposal destinations
- More efficient use of materials, consume less, buy goods with less packaging, reusing goods
• Recovery (recycling, composting) = next best strategy in waste management
- Recycling = sends used goods to manufacture new goods
- Composting = recovery of organic waste
18-9
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Municipal Solid Waste
18-10
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Patterns in the municipal solid waste stream vary from place to place
• Municipal solid waste is also referred to as trash or garbage
• In Canada, paper, organics, and plastics are the principal components of municipal solid waste
- Even after recycling, paper is the largest component of solid waste
- In 2008, 2.2 kg per person per day
• In developing countries, food scraps are the primary contributor to solid waste
- Wealthy nations invest more in waste collection and disposal
18-11
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
18-12
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
18-13
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Waste generation is rising in all nations
• Since 1960, waste generation has increased in North America by 300%
- Plastic has accounted for greatest relative increase
• Waste generation in Canada has kept pace with population growth
• In many industrialized nations, per capita waste generation rates have leveled off or decreased in recent years
- Increase popularity of recycling
18-14
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Open dumping in the past has given way to improved disposal methods
• Historically people dumped their garbage wherever it was convenient
• Most industrialized nations now bury waste in lined and covered landfills or burn it in incineration facilities
• Diversion rates are increasing in Canada
- Recycling or composting increased from 21% to 27% in 2008 and is undoubtedly higher now
18-15
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Waste disposal is regulated by three levels of government• Municipal:
- Collection, diversion, and disposal of solid waste- Drop-off facilities for hazardous waste
• Provincial and territorial:- Movement of waste materials within the jurisdiction- Licensing of treatment facilities- Legislation and guidelines for landfill sites
• Federal government:- International agreements about waste- Transboundary movements of waste materials
18-16
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Sanitary landfills are engineered to minimize leakage of contaminants
• Sanitary landfills = waste buried in the ground or piled in large, engineered mounds
• Leachate = liquid that results when trash dissolves in water as rainwater percolates downward
18-17
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Landfills can be transformed after closure
• Many landfills lie abandoned
- Managers closed smaller landfills and made fewer larger landfills
• Decommissioning = shutting down an industrial site and getting it ready for cleanup and repurposing
• Growing cities converted closed landfills into public parks
- Rouge Park in Toronto
- Fresh Kills in New York
18-18
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Landfills have drawbacks• Experts believe that leachate (toxic fluid) will eventually
escape
- The liner will become punctured
- Leachate collection systems eventually aren’t maintained
• It is hard to find places suitable for landfills
- The Not-In-My-Backyard (NIMBY) syndrome
• The “garbage barge” case
- 1987: Islip, New York’s landfills were full, and a barge traveled to empty the waste in North Carolina, which rejected the load, as did Louisiana and Mexico
- It returned to Queens to incinerate the waste, after a 9,700 km journey
18-19
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Incinerating trash reduces pressure on landfills
• Incineration = a controlled process in which mixed garbage is burned at very high temperatures; often used in Europe to also generate energy; proposed for Duke Point.
• Incineration in specially constructed faculties can be an improvement over open-air burning of trash
- But, the remaining ash must be disposed of in a hazardous waste landfill
- Hazardous chemicals are created and released during burning
• Scrubbers = chemically treat the gases produced in combustion to remove hazardous components and neutralize acidic gases
18-20
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
18-21
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Many incinerators burn waste to create energy
• Waste-to-energy facilities (WTE) = use the heat produced by waste combustion to create electricity
- Waste generates about 35% of the energy generated by burning coal
• Companies contract with communities to guarantee a minimum amount of garbage
- Long-term commitments interfere with the communities’ later efforts to reduce waste
18-22
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Landfills can produce gas for energy
• Bacteria can decompose waste in an oxygen-deficient environment
• Landfill gas = a mix of gases that consists of roughly half methane
- Can be collected, processed, and used like natural gas
- When not used commercially, landfill gas is burned off in flares to reduce odors and greenhouse emissions
• More than 40 operational projects in Canada collect landfill gas and convert it into energy
18-23
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Garbage justice?
• Do you know where your trash goes?
• Where is your landfill or incinerator located?
• Are the people who live closest to the facility wealthy, poor, or middle class?
• What race or ethnicity are they?
• Do you know whether the people of this neighbourhood protested against the introduction of the landfill or incinerator?
•How much e-waste gets dumped in developing countries?
weighing
the issues
18-24
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Reducing waste is a better option• Source reduction = preventing waste generation in
the first place
- Avoids costs of disposal and recycling
- Helps conserve resources
- Minimizes pollution
- Can save consumers and businesses money
• Strategies
- Reduce packaging
- Ban or per-bag charges for plastic grocery bags
- Increase the longevity of goods
18-25
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Reuse is one main strategy for waste reduction
• Donate used items to charity
• Reuse boxes, paper, plastic, wrapping paper, and so on
• Buy groceries in bulk
• Decline bags at stores and bring cloth bags shopping
• Bring your own cup to coffee shops
• Buy rechargeable batteries
• Select goods with less packaging
• Compost kitchen and yard wastes
• Rent or borrow items instead of buying them
18-26
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Reducing Packaging: Is It A Wrap?
Reducing packaging cuts down on the waste stream, but how, when, and how much should we reduce? Packaging can serve very worthwhile purposes, such as safeguarding consumer health and safety.
• Can you think of three products for which you would not want to see less packaging?
•Can you name three products for which packaging could easily be reduced without ill effects to the consumer?
•Would you be any more or less likely to buy these products if they had less packaging?
weighing
the issues
18-27
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Composting recovers organic waste
• Composting = the conversion of organic waste into mulch or humus through natural biological processes of decomposition
• There are now more than 350 centralized composting programs in Canada
• 28% of the Canadian solid waste stream is made up of materials that can easily be composted
• 57% of Canadian households do some form of composting
18-28
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Recycling consists of three steps
18-29
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Recycling has grown rapidly and can expand further
• 95% of Canadian households have access to recycling programs
• Recycling rates vary from one product or material type to another and from one location to another
• Big controversy in BC over new system that would put costs of waste disposal on businesses
• Increase has been driven by
- Economic forces
- Desire to reduce waste
18-30
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Costs of Recycling and Not Recycling
• Should recycling programs be subsidized by governments even if they are run at an economic loss?
• What types of external costs—costs not reflected in market prices— do you think would be involved in not recycling, say, aluminum cans?
• Do you feel these costs justify sponsoring recycling programs even when they are not financially self-supporting? Why or why not?
weighing
the issues
18-31
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Financial incentives can help address waste
• Pay-as-you-throw = uses financial incentives to influence consumer behavior
- The less waste a house generates the less it is charged for trash collection
• Return-for-refund = consumers pay a deposit, and receive a refund for returning used bottles
- Greatly reduced beverage container litter
- All provinces and territories in Canada except for Nunavut
18-32
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Edmonton showcases reduction and recycling
• Edmonton, Alberta, has created one of the world’s most advanced waste management programs
- Waste: 35% sanitary landfilled, 15% is recycled, 50% is composted
- 88% of the people participate in curbside recycling
18-33
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Industrial Solid Waste
18-34
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Industrial solid waste
• Industrial waste = waste from factories, mining, agriculture, petroleum extraction, etc.
18-35
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Regulation and economics each influence industrial waste generation
• Most methods and strategies of waste disposal, reduction, and recycling are similar to municipal solid waste
• The amount of waste generated by a manufacturing process is one measure of its efficiency
• Physical efficiency is not equal to economic efficiency
- It can be cheaper to generate waste than to avoid waste
• The rising cost of waste disposal encourage industries to decrease waste and increase physical efficiency
18-36
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Industrial ecology seeks to make industry more sustainable• Industrial ecology = redesigning industrial systems to
reduce resource inputs and to minimize physical inefficiency while maximizing economic efficiency
• Life cycle analysis = examine the life cycle of a product and look for ways to make the process more ecologically efficient
• Pollution prevention (P2) strategies = aimed at reducing waste and preventing pollution at its source
18-37
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Businesses are adopting industrial ecology• Interface
- Modified tile design and production methods to reduce waste
- Cut waste generation by 80%, fossil fuel use by 45%, and water use by 70%, while raising profits by 49%
• Canadian Tire- Auto parts return initiatives
• Xerox- Take-back/lease programs
• ENVIRx program- Return unused medications to pharmacies for
disposal18-38
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Waste exchanges are an offshoot of industrial ecology
• Concept of industrial ecology is based on a “closed loop”
- Wastes are recycled back through the system
• Waste exchange = a network service with the goal of linking producers of waste with industries or individuals that can make use of the waste as raw materials
• The Waste Exchange of Canada www.recyclexchange.net
18-39
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Hazardous Waste
18-40
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Hazardous waste• 1999: Canadian Environmental Protection Act:
- Flammable = substances that easily catch fire
- Corrosive = substances that corrode metals in storage tanks or equipment
- Reactive = substances that are chemically unstable and readily react with other compounds, often explosively or by producing noxious fumes
- Toxic = substances that harm human health when they are inhaled, are ingested, or contact human skin
18-41
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Hazardous wastes have diverse sources• Households currently are the largest source of
unregulated hazardous waste
- Household hazardous waste (HHW)
- Paints, batteries, oils, solvents, cleaning agents, pesticides
• Canadians improperly dispose of 27 000 tonnes of HHW each year
- Average home has close to 45 kg of hazard wastes
- Two classes are particularly hazardous
- Organic compounds
- Heavy metals
18-42
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Organic compounds and heavy metals can be hazardous• Organic compounds
- are particularly hazardous because their toxicity persists over time and synthetic organic compounds resist decomposition
- Keep buildings from decaying, kill pests, and keep stored goods intact
- Their resistance to decay causes them to be persistent pollutants
- They are toxic because they are readily absorbed through the skin
- They can act as mutagens, carcinogens, teratogens, and endocrine disruptors
18-43
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Organic compounds and heavy metals can be hazardous (cont’d)
• Heavy metals- Lead, chromium, mercury, arsenic, cadmium, tin, and
copper
- Used widely in industry for wiring, electronics, metal plating, pigments, and dyes
- They enter the environment when they are disposed of improperly
- Heavy metals that are fat soluble and break down slowly are prone to bioaccumulation
18-44
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
“E-waste” is a new and growing problem
• Electronic waste (e-waste) = waste involving electronic devices
- Computers, printers, VCRs, fax machines, cell phones
- Disposed of in landfills, but should be treated as hazardous waste (6% of a typical computer is composed of lead)
- Some people and businesses are trying to use and reuse electronics to reduce waste
- Serious concerns about health risks to workers
18-45
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Several steps precede the disposal of hazardous waste
• For many years, hazardous waste was discarded without special treatment- Public did not know it was
harmful to human health- Assumed the substances
would disappear or be diluted in the environment
- Since the 1980s, cities designate sites or special collection days to gather household hazardous waste
18-46
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
There are three disposal methods for hazardous waste
• Secure landfills
• Surface impoundments
• Deep-well injection
• These methods do nothing to lessen the hazards of the substances but do keep the waste isolated
18-47
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Secure landfills
• Must have several impervious liners and leachate removal systems
- Design and construction standards are stricter than for ordinary sanitary landfills
- Must be located far from aquifers
18-48
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Surface impoundments
• Surface impoundments = store liquid hazardous waste
• Shallow depressions are lined with plastic and clay
• Residue of solid hazardous waste is transported elsewhere
• The underlying clay layer can crack and leak waste
• Rainstorms cause overflow, contaminating nearby areas
18-49
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Deep-well injection• Deep-well injection = a
well is drilled deep beneath the water table and waste is injected into it
- Long-term disposal
- The well is intended to be isolated from groundwater and human contact
- Wells become corroded and leak waste into soil
18-50
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Radioactive waste is especially hazardous
• Radioactive waste is particularly dangerous and persistent
• Geologic isolation = using the absorptive capacity and impermeability of naturally occurring rock to block contaminants
• Multiple-barrier approach = engineering the facility to place as many barriers as possible, both physical and chemical, in the pathway of any escaping contaminants
18-51
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Contaminated sites are being cleaned up, slowly
• 18,000 Canadian contaminated sites, including priority sites for cleanup activities:
- Faro Mine, Yukon ($14.6 million)
- Canadian Forces Base Esquimalt, British Columbia ($4.56 million)
- Port Radium Mine, Northwest Territories ($7.1 million)
- Belleville Small Craft Harbour, Ontario ($6.8 million)
• Brownfields = sites that have been contaminated but have the potential to be cleaned up and remediated
18-52
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
Conclusion
• Modern methods of waste management are far safer for people and gentler on the environment
• Recycling and composting are making rapid progress
• Canada has changed from virtually no recycling to diverting nearly 25% of all solid waste
• Our prodigious consumption habits have created more waste than ever before
• Finding ways to reduce, reuse and efficiently recycle the materials and goods that we use stands as a key challenge for this century
18-53
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
QUESTION: Review
All of the following are three main components of waste management except:
a) Minimizing the amount of waste we generate b) Recovering waste materials and finding ways to recycle
them c) Disposing of waste safely and effectively d) All of these are components of waste management
18-54
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
QUESTION: Review
Within a sanitary landfill, waste is…
a) Poured into deep wells
b) Stored in large piles and then burned
c) Buried in the ground or piled up in large, carefully engineered mounds
d) Put onto barges and shipped overseas
18-55
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
QUESTION: Review
What are some ways we can reduce the amount of items entering the waste stream?
a) Donate used items to charity
b) Buy groceries in bulk
c) Buy rechargeable batteries
d) All of the above are ways to reduce the waste stream
18-56
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
QUESTION: Review
Industrial ecology is defined by all of the following EXCEPT:
a) Redesigning industrial systems to reduce resource inputs
b) Examining the entire life cycle of a given product
c) Minimizing physical inefficiency
d) Maximizing economic efficiency
18-57
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
QUESTION: Review
Which of the following are disposal methods for hazardous waste?
a) Landfills
b) Surface impoundments
c) Injection wells
d) All of the above are disposal methods
18-58
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
QUESTION: Review
Radioactive waste ….
a) Is dangerous, but is not persistent in the environment
b) Is not harmful to the environment, but is persistent
c) Is dangerous to human health and is persistent
d) Is not dangerous to human health, but is dangerous to the environment
18-59
© 2010 Pearson Education Canada
Copyright © 2013 Pearson Canada Inc.
QUESTION: Interpreting Graphs and DataWhich statement is false for this figure?
a) Paper makes up most of the solid waste
b) Compostable material is a significant part of solid waste
c) Glass recycling would have the greatest impact on solid waste
d) Metals are part of solid waste
18-60