18502692 h8 ov bev.prod uk -...

18502692 H8_Ov_Bev_produc_UK

M O U N T I N G P R O D U C T S

Edition 2007 / UK

K BALL AND HINGE JOINT

��

��

Flamco Mounting products

8

VG ANGULAR PLATE

KCL PROFILE CLAMP

GP MOUNTING PLATE

BMG ASSEMBLY STRIP


Mo

un

tin

g p

rod

uc

ts

P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.2

��

P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.2P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.2


VG ANGULAR PLATE

FIXED ANGULAR PLATE

FLEXIBELThe best flexible and fixed mountings are from Flamco

K ball and hinge joint

◆ For a fl exible and

adjustable mounting.

◆ Max. movement of the

ball and hinge joint is

2 x 20°.

◆ Vertical adjustment by

turning the lowest part

of the ball and hinge

joint after mounting in

the pipe.

VG angular plate

◆ Especially suitable for

fi xed constructions in

combination with BSP

fi xed brackets.

◆ Also for adjustable

hanging and support

constructions.

◆ Fitted with slotted

holes.

Tables with types and technical information: page 8.8 – 8.15. See also FlamcoFit for fl exible mounting (page 5.2).

The expansion of pipes, as a result of temperature changes caused by the liquid fl owing

through them, requires in many cases a flexible mounting. For this, Flamco offers a

number of practical solutions which take into account the built in height and the strain

required.

In other cases, however, fixed constructions are essential. For these too Flamco offers

a number of possibilities which can be found in these pages and in our other brochures.

K ball and hinge joint.

BKI pipe hanger with rubber lining: page 1.7.

BSP fi xed point clip: page 1.5.

BVP mounting fi xed.

GP mounting plate page 8.5.

BSA clip for every type of pipe: page 1.2.GK 150 sliding piece.


Mo

un

ting

pro

du

cts

P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.3P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.3P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.3

KK SHORT BALL AND HINGE JOINT

GK 50 SLIDING PIECE GK 150 SLIDING PIECE GK 500 SLIDING PIECE GK 750 SLIDING PIECE

FIXED BVP MOUNTING FIXED BSF CLIPS (PAGE 1 .4 )

KB CLIPS (PAGE 1 .5 ) BSP FIXED POINT CLIPS (PAGE 1 .5 )

VH MOUNTING CORNERS (PAGE 6 .4 )

VP MOUNTING PLATES (PAGE 6 .4 )

RZ SUPPORT SADDLES (PAGE 6 .5 )

RH MOUNTING ANGLES (PAGE 6 .5 )

GP MOUNTING PLATE (PAGE 8 .5 )

F IXED ANGULAR PLATE

FLEXIBEL FLEXIBEL FLEXIBEL FLEXIBEL FLEXIBEL

KK short ball and hinge

point

◆ For a flexible mounting

with restricted

headroom.

◆ Inspection hole for

monitoring the screw

depth of the support rod

(also applicable to ball

and hinge joint K).

◆ Max. movement of the

ball and hinge joint is

2 x 20°.

BVP mounting fixed

◆ Especially suitable for

fixed constructions in

combination with BSP

fixed brackets, screwed

end D 10 and GP

mounting plates.

◆ Electrolytically

galvanized.

GK 50 sliding piece

◆ For all sliding pieces:

for a flexible mounting

in the length direction of

the tube.

◆ Suitable for Flamco rail

R 1, R 2, R 3, R 4, R 6,

R 7 and R 8.

◆ The length of slide

depends on the rail

length.

◆ Sliding material PA 6

(nylon).

GK 150 sliding piece

◆ Standard sliding length

60 mm.

◆ By using Flamco rail

R 2 instead of a sliding

piece, a greater sliding

length is possible.

◆ Fitted with slotted holes

for accurate adjustment

of the sliding piece.


(nylon).


◆ Max. sliding length

90 mm.

◆ The pressure plate is

completely enclosed in

the sliding piece.

◆ Fitted with slotted holes

for accurate adjustment

of the sliding piece.


◆ Sliding length more

than 120 mm.

◆ Suitable for various

screw connections

and for heavy loads.

◆ Fitted with slotted

holes for accurate

adjustment of the

sliding piece.


(nylon).

More possibilities for fixed mounting


Mo

un

tin

g p

rod

uc

ts


��


For mounting to profiles or to a wall, Flamco has the professional solution!

RB rail mounting

◆ For mounting Flamco rail

on steel profi les without

drilling or welding.

◆ Suitable for Flamco rail

R 1, R 2, R 3, R 4, R 6,

R 7 and R 8.

◆ The load capacity is

relative to the Flamco

rail used.

◆ Supplied complete with

top and bottom plate,

nut and bolt.

BME and BMU

assembly strips

◆ For double wall bracket

mounting.

◆ Adjustable centres.

◆ The BS universal

brackets (brochure 1)

can be used in combina-

tion with the BMV, BMD,

BME and BMU assembly

strips.

BMV and BMD

assembly strips

◆ For double wall bracket

mounting.

◆ Supplied complete with

coach bolt, washer and

plastic plug.

◆ Aligned tube assembly

through fi xed heart

distance.

It is not always possible or desirable to mount pipes on the ceiling. Sometimes,

mounting on steel profiles is the only, or the best, possibility. But then without the

need for drilling or welding! With Flamco profile mountings, this is no problem.

For mounting to a wall, Flamco also offers you a wide selection of products.

See for yourself in the following pages.

KCK profi le clamp.

KCH profi le clamp.

KVS-D profi le clamp.RB rail mounting.

Flamco rail R.

RB RAIL MOUNTING

BMV AND BMD ASSEMBLY STRIPS

BME AND BMU ASSEMBLY STRIPS


Mo

un

ting

pro

du

cts


For mounting to profiles or to a wall, Flamco has the professional solution!

KC and KCH profile clamps

◆ For mounting a single

suspension underneath a

steel profile without welding

or drilling.

◆ The bolt must be tightened

by hand, plus one additional

rotation.

◆ A number of types are FM

and/or VdS approved.

KCL, and KCK profile clamps

◆ For mounting to a steel profile

without welding or drilling.

◆ Vertically adjustable.

◆ The bolt must be tightened

by hand, plus one additional

rotation.

◆ A number of types are FM

and/or VdS approved.

KVS-D profile clamp

◆ For mounting to a steel

profile without welding or

drilling.

◆ Hinged mounting,

adjustable vertically.

◆ Quick mounting using a

hammer.

LT / LTM / LTV roof

profile mounting

◆ For mounting screwed rod to

steel roof profiles.

◆ LT: with unthreaded hole.

◆ LTM: with welded nut.

◆ LTV: vertical adjustment by

turning the lowest part of the

threaded tube after mounting

the threaded rod.

Flamco offers a particularly large choice in mounting plates

◆ Types BMF and BMG for mounting two brackets.

◆ Types BMF and BMG in combination with DS wire tacks suitable for BS universal brackets.

Possibility of achieving two different pipe distances from the wall per assembly strip.

◆ Other types for mounting flush to the wall or ceiling using a threaded rod or threaded pipe.

◆ Circular or right-angled shape.

◆ Available with various threaded connections.

◆ Depending on the type, with or without round holes and/or slotted holes for mounting.

KVS-D PROFILE CLAMP

BMG

KCL AND KCK PROFILE CLAMP KC AND KCH PROFILE CLAMP LT / LTM / LTV ROOF PROFILE MOUNTING

BMF

GP 10 - 1/ 2

120 x 40

GP M 1080 x 30

RTG 4 - 1/ 2

GP 8 - 1070 x 20

GP G 1/ 2 - 60

GP 10 - 1/ 2 - 60

SRG 1 M 10

GPK M 1080 x 30 INSERT


Mo

un

tin

g p

rod

uc

ts


��


Everything you need for the best possible installation can be found on these pages

ST load spreader

◆ For supporting plastic

or insulated pipes, so

that constriction of pipe

or insulation is avoided.

◆ Suitable for use in

combination with BK

pipe hangers.

◆ Designed to prevent

movement when

installed in hte pipe

hanger.

AD adaptor

◆ For a rigid construction

in combination with a

BS universal clip.

◆ Can also be used with a

GP 1⁄2 mounting plate.

ST LOAD SPREADER

AD ADAPTOR

A very wide programme of mounting accessories is characteristic of Flamco. A pipe and

clip is rarely enough. For a good installation, you may choose from a large number of

mounting accessories, such as those illustrated on these pages. Whichever product you

choose is, naturally, dependent on the other products you use, the situation, and the

installation objective.

DA damper.

D threaded rod.

M nut.

PV in-line connector.

BK pipe hanger.

ST load spreader.


Mo

un

ting

pro

du

cts


D threaded rod and

threaded end

◆ Suitable for all

installations that

require threaded rod.

◆ Threaded rod standard

at 1 metre length.

◆ Threaded ends available

in lengths from 2.5 cm

up to and including

10 cm.

IP impact pin

◆ For mounting BM wall

clips and BS universal

clips.

◆ Supplied including wall

plug.

◆ Quick mounting using a

hammer.

Studs

◆ For mounting BM wall

clips and BS universal

clips.

KSM coupling pieces

◆ Depending on the type,

to be used for connecting

two threaded rods, for

mounting BS universal

clips and for mounting

BK pipe hangers one

under another.

PV in-line connector

◆ For easy and quick

connection of two

threaded rods of equal

diameter.

◆ Vertical adjustment

possible.

D THREADED ROD AND THREADED END

IP IMPACT PIN STUDS KSM COUPLING PIECES PV IN-L INE CONNECTOR

With Flamco you can choose from an extensive range of mounting accessories

◆ DS threaded stud for mounting BS universal clips.

◆ Available in lengths from 12 mm up to and including 65 mm.

◆ DA damper for noise suppression. Attenuation 20 dB(A).

◆ Bolts, plugs and screws in a large number of types.

◆ Toggle anchor specially for hollow walls and trapezium roofing plates, with large washer.

◆ Spilt anchor, for mounting in which a Flamco expander tool must be used.


Mo

un

tin

g p

rod

uc

ts


��

P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.8P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.8P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.8P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.8

◆ Ball and hinge joints electrolytically-galvanized.

◆ GK 50 sliding piece has a nylon PA 6 sliding piece and a brass threaded connection.

◆ GK 150: base plate and tube ST 37 electrolytically galvanized. Sliding tube nylon PA 6 and

plastic bar.

◆ GK 500: base plate and sliding tube ST 37 electrolytically galvanized. Sliding block

nylon PA 6.

◆ GK 750: bracket and tube ST 37 electrolytically galvanized. Sliding tube nylon PA 6 and

plastic bar.

◆ VG angular plate and BVP fixed mounting electrolytically galvanized.

K and KK ball and hinge joints, GK sliding pieces, VG angular plate, BVP fixed mounting and AD adaptors

Versions and dimensions K bal l and hinge jo intsType Threaded connection Length in mm Max. working

loadCode

numberD 1 D 2 L 2 - L 3 L 1 N

Vers ions and dimensions KK short bal l and hinge jo intsType Threaded connection Length in mm Build in

height in mm

Max. workingload

Codenumber

D 1 D 2 L 2 min. L 1 H N

Vers ions and dimensions GK 50 and GK 150 s l id ing p iecesType Threaded

connectionDimensions in mm Max. working

loadCode

numberM D 1 D 2 tube A gr. plate sl. hole B C D E N

Vers ions and dimensions GK 500 and GK 750 s l id ing p iecesType Threaded

connectionDimensions in mm Max. working

loadCode

numberM tube A gr. plate sl. hole B C D E N

Vers ions and dimensions VG angular p lateType Dimensions in mm Code

A B C D E K L M S sl. hole great sl. hole little number

Vers ions and dimensions BVP f ixed mount ingType Dimensions in mm Code

A B C X G 1 G 2 D E sl. hole number

Vers ions and dimensions AD adaptorsType Threaded connection Dimensions in mm Code number

D1 D2 Ø B L

KS 8 x 6 M 8 ext. M 6 int. 8-30 63 1500 80110KS 8 x 8 M 8 ext. M 8 int. 8-30 63 2500 80111

K 10 x 6 M 10 ext. M 6 int. 8-30 64 1500 80101K 10 x 8 M 10 ext. M 8 int. 8-30 64 2500 80102K 10 x 10 M 10 ext. M 10 int. 8-30 64 2500 80106

K 6 x 6 M 6 int. M 6 int. 8-30 58 1500 80103K 8 x 8 M 8 int. M 8 int. 8-30 58 2500 80104K 12 x 12 M 12 int. M 12 int. 12-50 90 5000 80105

KK 8 x 8 M 8 ext. M 8 int. 8 46 29 2500 80107KK 10 x 10 M 10 ext. M 10 int. 8 47 30.5 2500 80108

GK 50 - M 6 M 6 - - - - - - 55 24 11 3.4 500 71720GK 50 - M 8 M 8 - - - - - - 55 24 11 3.4 500 71722GK 150 - M 8/10 - M 8 M 10 160 x 35 x 20 120 117 x 40 11 x 22 82 35 - - 1500 71724GK 150 - M 10/12 - M 10 M 12 160 x 35 x 20 120 117 x 40 11 x 22 82 35 - - 1500 71726

GK 500 - M 6 M 6 - - - 11 x 22 220 195 50 45 2500 71710GK 500 - M 8 M 8 - - - 11 x 22 220 195 50 45 4500 71712GK 500 - M 10 M 10 - - - 11 x 22 220 195 50 45 5000 71714GK 500 - M 12 M 12 - - - 11 x 22 220 195 50 45 5000 71716GK 750 - 245 x 40 x 40 200 150 x 50 13 x 26 112 89 13 - 7500 71728

VG 140 x 100 x 3 40 100 18.5 140 25 50 11 10 3 80 x 11 20 x 11 71616

BVP 135-1 40 40 x 4 - 135° Ø 11 Ø 13 - - - 71623BVP 135-D 39 40 x 4 34 90° Ø 11 - 140 100 11 71624

AD 8 x 1/2 M 8 ext. 1/2 int. 26 31 70914AD 10 x 1/2 M 10 ext. 1/2 int. 26 33 70915

�

�

��

�

��

��

��

��

��

��

��

��

K KK

Extended d imens iona l drawings ava i lab le as PDF on the CD.

�

�

��

��

��

��

�

��

��

��

�

��

�

�

�

GK 150

GK 500

VG

BVP 135-1

�

��

��

�

��

AD


Mo

un

ting

pro

du

cts

P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.9P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.9P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.9P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.9P I P E S U P P O R T S Y S T E M M o u n t i n g p ro d u c t s8.9

��

◆ For each mounting, two RB rail mountings are required.

◆ RB rail mounting electrolytically-galvanized. KVS-D profile clamp executed in black

spring steel.

◆ KCL profile clamps manufactured from malleable cast iron GTS 35 – DIN 1692.

KCK GTS 45 – DIN 1692.

◆ The KCK profile clamp is fitted on the underside with two different threaded

connections.

◆ KC and KCH profile clamps in wrought steel C 22 / C 35 – DIN 17200. Adjustment bolt

in steel DIN 564-8.8.

RB rail mountings, KVS-D / KC / KCH / KCK / KCL profile clamps

Versions and dimensions RB ra i l mount ingsType Flamco Max. clamping Bolt Dimensions in mm Code

rail height H mm A B number

Vers ions and dimensions KVS-D prof i le clampsType Threaded

connectionFlange thickness

BDimensions in mm Max. working

loadCode

numberA mm H E N

Vers ions and dimensions KCL and KCK prof i le clampsType Threaded

connectionAdjust-ment bolt

Max. fl ange

thickness

Dimensions in mm Max. working load

Codenumber

A B C mm H 1 H 2 E F N black galvanised

Vers ions and dimensions KC and KCH prof i le clampsType Threaded

connectionAdjustment

boltMax.

fl ange thickness

Dimensions in mm Max. workingload

or threaded rod

Codenumber

A B mm H 1 H 2 E F N black galvanised

RB 1 R 1 15 M 10 x 55 20 44 80601RB 2 R 2 15 M 10 x 55 20 44 80602RB 3 / 4 R 3 / R 4 15 M 10 x 80 20 44 80604RB 6 R 6 15 M 10 x 100 20 50 80603RB 7 / 8 R 7 / R 8 15 M 10 x 80 20 50 80605

KVS-D 6 x 1.6 - 4.8 M 6 1.6 - 4.8 50 10 700 71554KVS-D 6 x 4.8 - 9.5 M 6 4.8 - 9.5 50 10 700 71556KVS-D 6 x 11.0 - 15.8 M 6 11.0 - 15.8 50 10 700 71558KVS-D 6 x 15.0 - 20.0 M 6 15.0 - 20.0 50 10 700 71560

KVS-D 8 x 1.6 - 4.8 M 8 1.6 - 4.8 50 10 700 71555KVS-D 8 x 4.8 - 9.5 M 8 4.8 - 9.5 50 10 700 71557KVS-D 8 x 11.0 - 15.8 M 8 11.0 - 15.8 50 10 700 71559KVS-D 8 x 15.0 - 20.0 M 8 15.0 - 20.0 50 10 700 71561

KCL 6 M 6 M 6 M 6 x 35 18 39 21 36 20 2100 - 71570KCL 8 M 8 M 8 M 8 x 45 18 39 21 36 20 2500 - 71571KCK 6 M 6 M 8 M 6 x 35 18 45 21 46 24 2100 71516 71535KCK 8° M 8 M 10 M 8 x 45 18 45 21 46 24 3800 71517 71536KCK 10*° M 10 M 8 M 10 x 45 18 45 21 46 24 4500 71518 71537KCK 12*° M 12 M 12 M 10 x 45 18 45 21 46 24 5000 71519 71538

* FM approved. For the KCK 10, the FM approval only applies when the threaded connection M 10 (A) is used.

° VdS approved.

KC 6 M 6 M 8 x 45 18 54 21 46 25 2100 71501 71521KC 8° M 8 M 8 x 45 18 54 21 46 25 3800 71502 71522KC 10*° M 10 M 10 x 45 18 54 21 46 25 5000 71503 71523KC 12*° M 12 M 10 x 45 18 54 21 46 25 5000 71504 71524

KCH 8° M 8 M 10 x 60 30 65 32 54 30 3800 - 71541KCH 10° M 10 M 10 x 60 30 65 32 54 30 6000 - 71542KCH 12° M 12 M 12 x 60 30 65 32 54 30 6000 - 71543KCH 16° M 16 M 12 x 60 30 65 32 54 30 6000 - 71544

* FM approved.° VdS approved

RB � �

�

�

�

�

��

KVS-D

�

�

��

��

KC / KCH

�

�

��

��

KCL / KCK


Mo

un

tin

g p

rod

uc

ts


��


◆ LT, LTM and LTV roof profile mountings electrolytically galvanized.

◆ BMV / BMD / BME and BMU assembly strips: coach bolt, washer and assembly strip

electrolytically galvanized. In combination with BMD and BMU assembly strips,

BM wall brackets t.m. 8 x 1 su, BM 8 x 35 su and BM 8 x 33/38 su can be used

BMA wall brackets t.m. 8 x 1 su and 8 x 28 su. BMK wall brackets t.m. 8 x 35 su.

◆ BMF and BMG assembly strips electrolytically galvanized and fitted with

a threaded connection M 8 for DS threaded studs.

◆ The GP mounting plate can also be used in fixed constructions, in combination with

KB clips or BVP fixed mounting.

LT / LTM / LTV roof profi le mountings, BMF / BMG / BMV / BMD / BME / BMU assembly strips / DA dampers, GP and SRG mounting plates

Versions and dimensions BMF / BMG assembly str ipsType A Threaded Slotted hole Dimensions in mm Code

mm connection mm D E F number

Vers ions and dimensions BMV / BMD / BME / BMU assembly str ipsType A Threaded

connectionMounting coach

screwDimensions in mm BS

clip Code

numbermm D E F till

Vers ions and dimensions LT / LTM / LTV roof prof i le mount ingsType Dimensions in mm Threaded

connectionCode

numberA B C Ø d E F

Vers ions and dimensions DA dampersType Threaded

connectionDimensions in mm Max. working load

20 dB(A)Code

numberA B C D E F N

Vers ions and dimensions GP/ SRG mount ing p lates Ø 60Type Threaded Dimensions in mm Slotted hole Code

connection A B H D E number

BMV 8 x 70 70 M 8 Ø 8 96 25 20 1 39429

BMD 8 x 50 50 M 8 Ø 8 76 25 40 - 39424BMD 8 x 70 70 M 8 Ø 8 96 25 40 1 39426BMD 8 x 90 90 M 8 Ø 8 116 25 40 2 39428

BME 8 x 50 / 90 50 - 90 M 8 Ø 8 72 - 112 25 29 2 39420BMU 8 x 60 / 72 60 - 72 M 8 Ø 8 90 16 40 1 39537

BMF 8 - 8 x 40 40 M 8 8.2 x 22 60 25 5 37950BMF 8 - 8 x 55 55 M 8 8.2 x 22 75 25 5 37951BMF 8 - 8 x 65 65 M 8 8.2 x 22 85 25 5 37952BMF 8 - 8 x 85 85 M 8 8.2 x 22 105 25 5 37953BMF 8 - 8 x 105 105 M 8 8.2 x 22 125 25 5 37954BMF 8 - 8 x 150 150 M 8 8.2 x 22 170 25 5 37955BMF 8 - 8 x 200 200 M 8 8.2 x 22 220 25 5 37956

BMG 8 - 50 / 95 50 - 95 M 8 10 x 10 - 40 72-110 29 11.5 39421

LT 32 30 x 2 90 10.5 100 Ø 12 71900

LTM 8 32 30 x 2 90 10.5 100 M 8 71910LTM 10 32 30 x 2 90 10.5 100 M 10 71912LTM 12 32 30 x 2 90 10.5 100 M 12 71914

LTV 8 32 30 x 2 90 10.5 100 M 8 71920LTV 10 32 30 x 2 90 10.5 100 M 10 71922

DA 6 M 6 Ø 40 x 30 Ø 8.5 32 55 - 500 80800DA 8 M 8 Ø 40 x 30 Ø 8.5 32 55 - 500 80801DA 10 M 10 Ø 50 x 40 M 12 - 99 12 2000 80802

GP 1/2 / M 10 - Ø 60 1/2 / M 10 44 Ø 60 - 11 3 16 x 6 / 15 x 8 39422GP 1/2 / M 10 - Ø 60 1/2 / M 10 - Ø 60 - 11 3 - 39423GP 1/2 - 60 1/2 44 Ø 60 - 18 3 16 x 6 / 15 x 8 39416GP 3/4 - 60 3/4 50 Ø 60 60 21 4 Ø 6.5 39414SRG 1 - 3/8 3/8 - - - - - - on requestSRG 1 - 1/2 1/2 44 - - 18 3 - 52422SRG 1 - 3/4 3/4 - - - - - - on requestSRG 1 - M 10 M 10 45 - - 18 3 - 52426

LTV �

�

�

�

�

��

BMF

�

�

�

�

�

�BMG

�

�

�

BMV / BMD

�

�

�BME

��

�

�

�DA

��

��

GP


Mo

un

ting

pro

du

cts


��

◆ The GP mounting plates 8, 10, 12 and 1⁄2 are suitable for use in combination with

a BS universal bracket.

◆ The GP mounting plate can also be used in fixed constructions, in combination with

KB clips or BVP fixed mounting.

GP / RTG mounting plates,PV parallel connectors / srews

Version and dimensions GP mount ing p lates 70 x 20Type Threaded Dimensions in mm Slotted hole Code


Vers ions and dimensions GP / GPK mount ing p lates 80 x 30Type Threaded Dimensions in mm Slotted hole Code


Vers ions and dimensions GP / GPK mount ing p lates 120 x 40Type Threaded Dimensions in mm Slotted hole Code


Vers ions and dimensions RTG mount ing p lates 120 x 60Type Threaded Dimensions in mm Code number

connection B H D E

Vers ions and dimension screwsType Threaded connection Code number

D

Vers ions and dimensions PV paral le l connectorsType Suitable

forDimensions in mm Max. working

load inCode

numberthreaded rod A B C D N

GP 8 / 10 - 70 x 20 M 8 / 10 53 20 70 19 2 6.5 x 8.5 on request

GP 8 - 80 x 30 M 8 54 30 80 11 3 9 x 16 39417GP 8 / 10 - 80 x 30 M 8 / 10 54 30 80 18 3 9 x 16 39410GP 10 - 80 x 30 M 10 54 30 80 13 3 9 x 16 39413GPK 10 - 80 x 30 M 10 54 30 80 19 3 9 x 16 39444GP 12 - 80 x 30 M 12 54 30 80 15 3 9 x 16 39415GP 16 - 80 x 30 M 16 54 30 80 19 3 9 x 16 39441GP 3/8 - 80 x 30 3/8 54 30 80 15 3 9 x 16 39440GP 1/2 - 80 x 30 1/2 54 30 80 18 3 9 x 16 39418GP 1/2 / M 10 - 80 x 30 1/2 / M 10 54 30 80 11 3 9 x 16 39409

GP 1/2 - 120 x 40 1/2 85 40 120 19 4 11 x 18 39419GP 3/4 - 120 x 40 3/4 85 40 120 21 4 11 x 18 39411GP 1 - 120 x 40 1” 85 40 120 25 4 11 x 18 39412GP 3/8 - 120 x 40 3/8 85 40 120 16 4 11 x 18 39430GP 8 - 120 x 40 M 8 85 40 120 12 4 11x 18 39432GP 10 - 120 x 40 M 10 85 40 120 14 4 11 x 18 39433GP 12 - 120 x 40 M 12 85 40 120 16 4 11 x 18 39434GP 16 - 120 x 40 M 16 85 40 120 20 4 11 x 18 39435GP 1/2 / M 10 - 120 x 40 1/2 / M 10 85 40 120 12 4 11 x 18 39442GPS 3/8 - 120 x 40 3/8 85 40 120 16 4 13 x 18 39436GPS 1/2 - 120 x 40 1/2 85 40 120 19 4 13 x 18 39437GPS 3/4 - 120 x 40 3/4 85 40 120 21 4 13 x 18 39438GPS 1 - 120 x 40 1 85 40 120 25 4 13 x 18 39439

RTG 4 - 1/2 1/2 60 120 20 5 53542RTG 4 - 3/4 3/4 60 120 20 5 53543RTG 4 - 1 1 60 120 20 5 53544

Hexagonal screw M 6 x 20 1028Philips head screw M 8 x 20 1029Internal hexagonal screw M 6 x 16 1052-1Internal hexagonal screw M 8 x 18 1052Internal hexagonal screw M 10 x 16 1052-2

PV 6 M 6 35 9 14 6 950 70950PV 8 M 8 34 11 18.5 8 2800 70951PV 10 M 10 35 14 23 10 2800 70952

�

�

GP

�

�

�

�

�

�

��

GP

PV

�

�

�

�

RTG

� �

SCREW


Mo

un

tin

g p

rod

uc

ts


��


◆ Threaded rods and threaded ends according to DIN 13 part 12, rolled thread,

electrolytically galvanized. Material ST 37-2, quality 4.6.

D threaded rod and threaded end, DS threaded stud, threaded tubes internal / external

Versions and dimensions D threaded rodsType Threaded

connectionMax. working

loadCode number

D N 1 m 2 m

Vers ions and dimensions D threaded endsType Threaded

connectionLength

inCode

numberD mm

Vers ions and dimensions DS threaded studsType Threaded

connectionDimensions in mm Code number

D L A B

Vers ion and dimensions threaded tube, internalType Threaded

connectionLength

inCode

numberD mm

Vers ions and dimensions threaded tube, externalType Threaded

connectionLength

inCode

numberD mm

D 6 M 6 2500 70011 70031D 8 M 8 4500 70012 70032D 10 M 10 7000 70013 70033D 12 M 12 10000 70014 70034D 16 M 16 18000 70015 -D 20 M 20 25000 70016 -

D 8 x 25 M 8 25 70750D 8 x 40 M 8 40 70751D 8 x 70 M 8 70 70752D 8 x 80 M 8 80 70753D 8 x 100 M 8 100 70754

D 10 x 25 M 10 25 70755D 10 x 40 M 10 40 70756D 10 x 60 M 10 60 70757D 10 x 80 M 10 80 70758D 10 x 100 M 10 100 70759

DS 8 x 12 M 8 19 5 12 63210DS 8 x 25 M 8 25 5 5 63211DS 8 x 35 M 8 35 5 5 63212DS 8 x 45 M 8 45 5 5 63213DS 8 x 55 M 8 55 5 5 63214DS 8 x 65 M 8 65 5 5 63215

Threaded tube, internal 1/2 1/2 int. 1000 51615

Threaded tube, external 3/8 3/8 ext. 2000 51610Threaded tube, external 1/2 1/2 ext. 2000 51611Threaded tube, external 3/4 3/4 ext. 2000 51612Threaded tube, external 1 1 ext. 2000 51613

��

�

D

DS

��

�

THREADED TUBE, INTERNAL

THREADED TUBE, EXTERNAL


Mo

un

ting

pro

du

cts


��◆ HO threaded studs exclusive plug. HD threaded studs including plug.

◆ Threaded studs according to DIN 13 part 12, rolled thread, electrolytically galvanized.

Material ST 37-2, quality 4-6.

◆ IP impact pins including plug.

IP impact pins, threaded studs

Versions and dimensions HO / HZ / HD threaded studsType Threaded connection Dimensions in mm Required plug Code number

D L A B SW Length Ø depth

Vers ions and dimensions IP impact p ins including p lugType Threaded connection Dimensions in mm Code number

D Length SW

Vers ions and dimensions threaded studsType Threaded connection Dimensions in mm Code number

D Length Ø


D Length Ø

HO 8 x 50 excl. plug M 8 50 15 30 - 50 10 55 - 65 70607HO 8 x 80 excl. plug M 8 80 40 30 6 50 10 55 - 65 70601HO 8 x 120 excl. plug M 8 120 50 50 6 50 10 55 - 65 70604HO 10 x 70 excl. plug M 10 70 28 30 8 60 12 65 - 75 70608HO 10 x 90 excl. plug M 10 90 40 40 8 60 12 65 - 75 70602HO 10 x 120 excl. plug M 10 120 50 50 8 60 12 65 - 75 70605HO 12 x 120 excl. plug M 12 120 50 50 9 70 14 75 - 85 70603

HZ 8 x 50 excl. plug Ø 8 50 - - 13 50 10 55 - 65 70606

HD 8 x 50 incl. plug M 8 50 15 30 - 50 10 55 - 65 71206HD 8 x 80 incl. plug M 8 80 40 30 6 50 10 55 - 65 71201HD 8 x 120 incl. plug M 8 120 50 50 6 50 10 55 - 65 71204HD 10 x 70 incl. plug M 10 70 28 30 8 60 12 65 - 75 71208HD 10 x 90 incl. plug M 10 90 40 40 8 60 12 65 - 75 71202HD 10 x 120 incl. plug M 10 120 50 50 8 60 12 65 - 75 71205HD 12 x 120 incl. plug M 12 120 50 50 9 70 14 75 - 85 71203

HZ 8 x 50 incl. plug Ø 8 50 - - 13 50 10 55 - 65 70616

IP 8 x 50 M 8 50 - 71250IP 8 x 80 M 8 80 6 71251IP 8 x 100 M 8 100 6 71252IP 8 x 120 M 8 120 6 71253

IP 10 x 80 M 10 80 8 71250IP 10 x 100 M 10 100 8 71255IP 10 x 100 M 10 120 8 71256

Threaded stud 1/2 1/2 120 10 52405Threaded stud M 10 M 10 120 10 52406

M 8 x 50 M 8 25 8 51700M 8 x 80 M 8 40 8 51701M 8 x 100 M 8 40 8 51702M 8 x 120 M 8 50 8 51703M 8 x 140 M 8 60 8 51704M 8 x 160 M 8 75 8 51705M 10 x 60 M 10 30 10 51706M 10 x 80 M 10 40 10 51707M 10 x 100 M 10 40 10 51708M 10 x 120 M 10 50 10 51709M 10 x 140 M 10 60 10 51710M 10 x 160 M 10 75 10 51711M 10 x 180 M 10 75 10 51712M 12 x 100 M 12 40 10 51713M 12 x 120 M 12 50 10 51714

�

��

��

�

IP ��

HO

�

��

HZ

THREADED STUD

THREADED STUD


Mo

un

tin

g p

rod

uc

ts


��


Threaded studs, coupling pieces and reducers

Versions and dimensions KSM coupl ing p iecesType Threaded connection Extension BK under BK For BS

universalL 1 L 2 Code

numberA B C D clips mm mm

Vers ions and dimensions coupl ing p iecesType Threaded connection Code number

D A

Vers ions and dimensions coupl ing p ieces internal threadType Threaded connection Dimensions in mm Code number

D Length

Vers ions and dimensions reducersType Threaded connection Code number

From To


A Length Ø

Coupling piece 8 x 10 M 8 M 10 1063-1Coupling piece 10 x 8 M 10 M 8 70913Coupling piece 12 x 10 M 12 M 10 70917Coupling piece 10 x 12 M 10 M 12 70918Coupling piece 12 x 8 M 12 M 8 70916

Coupling piece M 6 x 25 M 6 25 1059-1Coupling piece M 6 x 30 M 6 30 1059-2Coupling piece M 8 x 25 M 8 25 61690Coupling piece M 8 x 35 M 8 35 61692Coupling piece M 10 x 25 M 10 25 61700Coupling piece M 10 x 35 M 10 35 61702Coupling piece M 12 x 25 M 12 25 1060-2

Reducer 3/4 - 1/2 3/4 1/2 52417Reducer 1/2 - M 10 1/2 M 10 52418Reducer 3/8 - M 10 3/8 M 10 52419Reducer M 12 - M 8 M 12 M 8 52420

KSM 1 - 12 int. 8 int. 12 int. x - - 46 15 70901KSM 2 12 ext. 8 int. 6 int. 8 int. x x - 35 10 70902KSM 3 8 ext. - - 6 int. - x - 42 8 70903KSM 4 - 10 int. - - x - - 30 - 70904KSM 6 - 6 int. - - x - - 20 - 70906KSM 7 - 8 int. - - x - - 20 - 70907KSM 9 - 12 int. - - x - - 30 - 70909KSM 10 10 ext. - - 6 int. - - - 30 10 70910KSM 11 - 10 int. - 6 int. x - - 20 10 70911KSM 12 10 ext. - - 8 int. - - - 35 12 70912KSM 13 8 ext. - - 10 int. - - x - - 70913KSM 14 10 ext. - - 12 int. - - x - - 70917KSM 15 12 ext. - - 10 int. - - x - - 70918KSM 16 8 ext. - - 12 int. - - x - - 70916KSM 17 12 ext. - - 16 int. - - - - - 70919KSM 18 16 ext. - - 12 int. - - - - - 70920

M 10 x 50 M 10 50 10 51730M 10 x 80 M 10 80 10 51731M 10 x 100 M 10 100 10 51732M 10 x 120 M 10 120 10 51733M 10 x 140 M 10 140 10 51734

��

� �

KSM

THREADED STUD

COUPLING PIECEINTERNAL THREAD

REDUCER

��


Mo

un

ting

pro

du

cts


��

◆ Toggle anchor for special mounting to hollow ceilings, walls and trapezium roof plates.

ST support dishes, plugs, non drill anchors, eyebolts and plastic inserts

Versions and dimensions p lugsType Threaded connection Dimensions in mm Screw Code number

D Ø

Vers ions and dimensions non dr i l l anchorsType Threaded connection Code number

D

Vers ions and dimensions eyebol tsType Threaded connection Code number

D

Vers ions and dimensions p last ic insertsType Dimensions Code number

in mm

Vers ions and dimensions ST support d ishesType Suitable for

BK clipDimensions in mm Code number

D A d Ø min. Ø max.

Anchor plug M 6 - - 1025Anchor plug M 8 - - 1026Anchor plug M 10 - - 1020

Universal plug M 6 32 - 1017-4Universal plug M 8 36 - 1017-3Universal plug M 10 60 - 1017-5

Plastic plug M 8 - 6 1017Plastic plug M 10 - 8 1017-1Plastic plug M 12 - 10 1017-2

Toggle anchor M 8 100 1018-1

Non drill anchor M 6 1044-1Non drill anchor M 8 1045Non drill anchor M 10 1055Non drill anchor M 12 1055-1

Impact pin M 6 607Impact pin M 8 608Impact pin M 10 609Impact pin M 12 610

ST 70 - 83 70 - 83 70 154 1 70 83 80508ST 89 - 102 89 - 102 89 200 1 89 102 80510ST 108 - 127 108 - 127 108 200 1 108 127 80512ST 133 - 152 133 - 152 133 250 1 133 152 80513ST 159 - 178 159 - 178 159 250 1 159 178 80514ST 193 - 219 193 - 219 193 333 1 193 219 80516ST 241 - 267 241 - 267 241 480 1 241 267 80518ST 273 - 299 273 - 299 273 480 1 273 299 80519ST 323 - 355 323 - 355 323 480 1 323 355 80520

Eyebolt copper M 6 52808Eyebolt zinc-plated M 6 52804Eyebolt SS M 6 52806

Plastic insert transparent 30 x 1.5 52431Plastic insert black 30 x 1.5 52432

�

ST

��

PLUGS

NON DRILL ANCHOR

IMPACT PIN

EYEBOLT

PLASTIC INSERT


MOUNTING PRODUCTS

◆ CONTENTS PAGE

◆ Flexible mountings 8.2/8.3

◆ Fixed mountings 8.2/8.3

◆ Profile mountings 8.4/8.5

◆ Assembly strips 8.4/8.5

◆ Mounting products 8.6/8.7

◆ Tables 8.8/8.15

Copyright Flamco UK Limited. No part of this publication may be reproduced or

published in any way without explicit mention of the source. The data listed are

solely applicable to Flamco products. Flamco UK Limited shall accept no liability

whatsoever for incorrect use, application or interpretation of the technical

information. Flamco UK Limited reserves the right to make technical alterations.

Flamco UK Limited conditions of sale apply.

18502692

��Flamco UK Limited

Unit 4, St. Michael’s Road

Lea Green Industrial Estate

St. Helens, Merseyside

WA9 4WZ

Tel.: +44 (0) 1744 818100

Fax: +44 (0) 1744 830400

[email protected]

www.flamco.co.uk

There is more information on the CD that

accompanies this brochure.


VG ANGULAR PLATE

KCL PROFILE CLAMP

GP MOUNTING PLATE

BMG ASSEMBLY STRIP

18502692 h8 ov bev.prod uk -...

Documents