2013 Annual Meeting of Excellent Graduate Schools

for "Materials Integration Center" and "Materials Science Center"

in conjunction with

International Workshop on

Advanced Materials Synthesis Process and Nanostructure

Organized & Sponsored by The Grants for Excellent Gradate School, “Materials Integration Center”

and “Materials Science Center”, Tohoku University

Monash University

Korea Advanced Institute of Science and Technology

http://takuetsu2013.imr.tohoku.ac.jp

March 10-11, 2014

Hotel Hananoyu, Sendai Japan

Organizing Committee

Chair

Takashi Goto (Tohoku University, Japan)

Junsaku Nitta (Tohoku University, Japan)

Members

Suk-Joong L. Kang (Korea Advanced Institute of Science and Technology, Korea)

Yi-Bing Cheng (Monash University, Australia)

Takayuki Narushima (Tohoku University, Japan)

Kyosuke Ueda (Tohoku University, Japan)

Hirokazu Katsui (Tohoku University, Japan)

Screrariat

Hirokazu Katsui (Tohoku University, Japan)

Eriko Itoh (Tohoku University, Japan)

Technical Program

10 March, 2014

Room【結-Yui】

12:00‒13: 00 Registration

13:00 Opening Address

13:10‒14:30 Session I: Plenary Lectures (I01 & I02)

14:30 Break

14:40‒17:15 Session II: Oral short presentations A (A01‒A38)

17:15 Group photo & Break

17:30‒18:30 Session III: Poster Session A (A01‒A38)

Room【蔵王-Zao】

19:30 Banquet

11 March, 2014

Room【結-Yui】

9:00‒12:30 Session IV: Oral short presentations B (B01‒B51)

12:30 Lunch Break

14:00‒15:00 Session V: Poster Session B (B01‒B51)

15:00 Break

15:20 Poster Awards & Closing Address

Plenary Lecture

I01 13:10‒13:50 10th March, 2014

Sol-gel Processing of Ultra-High

Temperature Ceramics and Composites

Yi-Bing Cheng

Prof. Dr. Yi-Bing Cheng

Department of Materials Engineering,

Monash University, Victoria 3800 Australia

I02 13:50‒14:30 10th March, 2014

Boundary Structure-Dependent

Material Transport of Sintering

Suk-Joong L. Kang

Prof. Dr. Suk-Joong L. Kang

Department of Materials Science and Engineering,

Korea Advanced Institute of Science and Technology,

Republic of Korea

Instructions

Presentation Style

Oral short talk & Poster

Presentation Duration

Oral short talk* : 4 minutes

Poster : 1 h

* Including time for switching of presenters

* Please do not extend the presentation duration.

PC Usage (Oral short talk)

- Speakers should use PC provided by the committee.

Presentation

Session List Session I: Plenary Lecture (I01, I02) (13:10-14:30, 10 March)

13:10–13:50 I01 “Boundary Structure-Dependent Material Transport of Sintering”

Prof. Suk-Joong L. KANG (KAIST, Korea)

13:50–14:30 I02 “Sol-gel Processing of Ultra-High Temperature Ceramics and Composites”

Prof. Yi-Bing CHENG (Monash University, Australia)

Session II: Oral Short Presentation A (A01–A38) (14:40-17:15, 10 March)

Session III: Poster session A (A01–A38) (17:30-18:30, 10 March)

Session IV: Oral Short Presentation B (B01–B51) (9:00-12:30, 11 March)

Session V: Poster session B (B01–B51) (14:00-15:00, 11 March)

Speakers List (oral & poster) Session II & Session III (14:40-18:30, 10 March) A01 “Fabrication of Perpendicularly Magnetized L10-FePt / Permalloy Nanodots with a

Twisted Spin Structure” Weinan ZHOU (Tohoku University, Japan)

A02 “A study on crystal-site structure and solid solution range of Langasite-type oxide crystal with four elements”

Hengyu ZHAO (Tohoku University, Japan)

A03 “The effect of brightener on tin electroplating” Zishou ZHAO (Tohoku University, Japan)

A04 “Possibility of ZnAl2O4 Interlayer for Suppressing Impurity Out-diffusion in Growth of GaN on ZnO Substrate”

Jinyeop YOO (Tohoku University, Japan)

A05 “Effect of Mo on precipitation characteristics in Zr-Nb alloys” Huilong YANG (Tohoku University, Japan)

A06 “Spin Orbit torques in perpendicularly magnetized Pt/Co heterostructures” Tim YANG (Tohoku University, Japan)

A07 “Superconductivity of hydrogenated REBa2Cu3O6+δHy (RE = Y, Nd)” Hotaka YAGYU (Tohoku University, Japan)

A08 “μSR study of reduction and Ce-substitute effects on magnetic order in T’-structured Pr1.4-xLa0.6CexCuO4”

Kenji TSUTSUMI (Tohoku University, Japan)

A09 “Correlation between Mechanical property and Microstructure for Neutron Irradiation in Ceramics Materials”

Kouhei TADA (Tohoku University, Japan)

A10 “Structure analysis of O-AlNiRu” Shota SUZUKI (Tohoku University, Japan)

A11 “Applied strain effect on Tc and Jc for domain controlled REBCO coated conductors” Takumi SUZUKI (Tohoku University, Japan)

A12 “Observation of Indium Content Distribution on m-plane InGaN Film with Hillocks” Kanako SHOJIKI (Tohoku University, Japan)

A13 “Effect of Ti, Nb on Microstructure and Properties of Gray Cast Iron” Jingjie SHEN (Tohoku University, Japan)

A14 “Effect of Strong Coulomb interaction in a Three-Dimensional Topological Insulator” Akihiko SEKINE (Tohoku University, Japan)

A15 “ROS sensitive PPADT-PEG Block Copolymers for Drug Delivery” Geok Leng SEAH (Korea Advanced Institute of Science and Technology, Korea)

A16 “Temperature Dependence of Spin Excitation in High Transition Temperature Superconductor La1.90Sr0.10CuO4”

Kentaro SATO (Tohoku University, Japan)

A17 “Electrospun W doped BiVO4 Nanofibers as Highly Efficient Photocatalysts for Water Splitting”

Ki Ro YOON (Korea Advanced Institute of Science and Technology, Korea)

A18 “Crystallization kinetics of high iron concentration amorphous alloys under high magnetic fields”

Reisho ONODERA (Tohoku University, Japan)

A19 “TMR effect at high temperature in magnetic tunnel junctions” Atsuo ONO (Tohoku University, Japan)

A20 “Electron Correlation and Annealing Effects of Iron-Based Superconductor FeSe1-xTex Studied by Thermal Conductivity Measurements”

Masumi OHNO (Tohoku University, Japan)

A21 “Magnetic State of the Quasi-One-Dimensional Antiferromagnetic Single Crystal of Cu3Mo2O9 Studied by Thermal Conductivity”

Koki NARUSE (Tohoku University, Japan)

A22 “Grain boundary sliding in ultrafine-grained interstitial-free steel” Kasane NAKAZAWA (Tohoku University, Japan)

A23 “Heat Transport of Spins in the One-Dimensional Antiferromagnetic Spin System ABX3 (A = Rb, Cs; B = Co, Ni, Mn; X = Cl, Br)”

Yoshiharu MATSUOKA (Tohoku University, Japan)

A24 “The barrier property of ZnO:Al as a diffusion barrier layer between Cu and Si” Zifeng LI (Tohoku University, Japan)

A25 “Interlayer with High Electrolyte Wettability and Electronic Conductivity as Polysulfide Reservoir for Lithium-Sulfur Batteries”

Cho Long LEE (Korea Advanced Institute of Science and Technology, Korea)

A26 “Thermodynamic analysis on crystal site structure and dominant factors of Curie temperature of impurity-doped lithium niobate”

Chiniro KOYAMA (Tohoku University, Japan)

A27 “Magnetic properties of Co2FexMn1-xSi Heusler alloy thin film depending on the Fe composition and layer thickness”

Jinhyeok KIM (Tohoku University, Japan)

A28 “Fabrication of Ag-Cu alloy nanoparticles with oxidation resistance: experimental and theoretical approaches”

Na Rae KIM (Korea Advanced Institute of Science and Technology, Korea)

A29 “Co-Fe Layered Double Hydroxide for water oxidation” Sangjun KIM (Korea Advanced Institute of Science and Technology, Korea)

A30 “Evaluation of the stability of TaC under irradiation in Fe-Ta-C alloys and its effect on nano-hardness”

Sho KANO (Tohoku University, Japan)

A31 “Effect of Pb co-doping on Czochralski growth of heavily Al doped Si” Kaihei INOUE (Tohoku University, Japan)

A32 “Fast magnetization dynamics for L10-FePd thin films with perpendicular magnetic anisotoropy measured by all-optical pump-probe method”

Satoshi IIHAMA (Tohoku University, Japan)

A33 “Grain Boundary Segregation of Impurity during Colloidal Crystallization” Sumeng Hu (Tohoku University, Japan)

A34 “Improvement of the electrical conductivity of organic polymer PEDOT:PSS film through the higher-order hierarchical structure control”

Milena Agnieszka GUZIAK (Tohoku University, Japan)

A35 “Terahertz wave emission from S.I.-GaAs by below gap excitation” Hikari DEZAKI (Tohoku University, Japan)

A36 “3D-TSV Vertical Interconnection Method using Cu/SnAg Double Bumps and B-stage Non Conductive Films(NCFs)”

Yongwon CHOI (Korea Advanced Institute of Science and Technology, Korea)

A37 “The contact resistance measurement of Cu-Si electrode on InGaAs using by refined TLM”

Byeongtaek BAE (Tohoku University, Japan)

A38 “Sol-gel derived methylsiloxane hybrid materials for UV (Ultraviolet) stable light emitting diode encapsulant”

Junyoung BAE (Korea Advanced Institute of Science and Technology, Korea)

Session IV & Session V (9:00-15:00, 11 March) B01 “Suppression of CO2 Emission by Innovating Ironmaking Technology

-Lowering Reduction Temperature of Iron Ore-Carbon Composite by Using Charcoal under High Pressure-”

Qi ZHOU (Tohoku University, Japan)

B02 “Formation of carbide structures on mechanical property of carbon nanotube-aluminum composite”

Weiwei ZHOU (Tohoku University, Japan)

B03 “Vacancy behavior in B2-type FeAl analyzed by thermal expansion and high-temperature XRD”

Mi ZHAO (Tohoku University, Japan)

B04 “Effects of α/γ Orientation Relationship on VC Interphase Precipitation in Low Carbon Steels”

Yongjie ZHANG (Tohoku University, Japan)

B05 “Porous Tungsten by Dealloying in Metallic Melt” Seung-Geun YU (Tohoku University, Japan)

B06 “Thermal relaxation spectra in Pd42.5Cu30Ni7.5P20 metallic glasses” Yoshikatsu YAMAZAKI (Tohoku University, Japan)

B07 “Monitoring of Thick Welded Areas using In-Process Laser Ultrasonic Testing Technique”

Setsu YAMAMOTO (Tohoku University, Japan)

B08 “Crystal growth and luminescent properties of Cr:Y3Ga5O12” Akihiro YAMAJI (Tohoku University, Japan)

B09 “Numerical Analysis of Heat Transfer Process with Unstructured Particles” Yan XU (Tohoku University, Japan)

B10 “Control of phase decomposition by nano-plastic deformation in Ti-39 at.%Al single crystal”

Daixiu WEI (Tohoku University, Japan)

B11 “TiC-Graphene Sponge Composites Prepared by Sol-Gel infiltration” Xiaojing WANG (Monash University, Australia)

B12 “Understanding of Quasi-static Viscoelastic/Anelastic Behavior of Metallic Glass in Dynamic Viscoelastic Approach”

Hao WANG (Tohoku University, Japan)

B13 “Effect of additional elements on the porous structure of Fe-Cr foam prepared by dealloying in metallic melt”

Masashi TSUDA (Tohoku University, Japan)

B14 “Dry process synthesis and electrocatalytic properties of Pt-based alloy model catalysts for fuel cell applications”

Naoto TODOROKI (Tohoku University, Japan)

B15 “Effect of build direction on high temperature mechanical properties of Inconel 718 fabricated by electron beam melting”

Shihai SUN (Tohoku University, Japan)

B16 “AC impedance of Nb5+-doped BaTi2O5 single crystal” Keiji SHIGA (Tohoku University, Japan)

B17 “Temperature dependence of four terminal nonlocal signals in a lateral spin transport device with Co2Fe(Al,Si)/n-GaAs Schottky tunnel junctions”

Tatsuya SAITO (Tohoku University, Japan)

B18 “Charge Transport in Mesoporous TiO2 Bead Dye-Sensitised Solar Cells” Alex PASOCOE (Monash University, Australia)

B19 “Effect of Si on the field-induced magnetic anisotropy in Fe-rich nanocrystalline soft magnetic materials”

Richard R. PARSONS (Monash University, Australia)

B20 “Superelastic Properties at Cryogenic Temperatures in Ti-Ni, Ni-Co-Mn-In and Cu-Al-Mn Shape Memory Alloys”

Kodai NIITSU (Tohoku University, Japan)

B21 “Preparation of ultrafine jet-milled powders for Nd-Fe-B sintered magnets using HDDR and hydrogen decrepitation processes”

Michihide NAKAMURA (Tohoku University, Japan)

B22 “Phase equilibria and magnetic properties in Mn-Ga-Cu ternary alloys” Kazuhiro MINAKUCHI (Tohoku University, Japan)

B23 “The effect of grain refinement of commercially pure titanium on mechanical properties and cell response”

Alexander MEDVEDEV (Monash University, Australia)

B24 “High pressure treatment of MnSb compounds and their magnetic properties” Itsuki MATSUSHITA (Tohoku University, Japan)

B25 “Formation of metal emulsion by rising bubbles in molten Sn/salt system” Jiang LIU (Tohoku University, Japan)

B26 “Assessment of temperature and pressure dependence of molar volume and phase diagrams of binary Al-Si system”

Xuantong LIU (Tohoku University, Japan)

B27 “Dehydriding Properties of LiBH4 Combined with Mg2FeH6” Guanqiao LI (Tohoku University, Japan)

B28 “Densification of ZrC-TiC Composites by Spark Plasma Sintering” Ying LI (Tohoku University, Japan)

B29 “Effect of alloy composition on martensitic transformation and superelasticity in Fe-Ni-Co-Ti-B alloys”

Doyup LEE (Tohoku University, Japan)

B30 “Development of Semi-Solid Die Casting Process” JungSoo LEE (Tohoku University, Japan)

B31 “Effect of subsurface deformation on sliding wear behavior of Ti-29Nb-13Ta-4.6Zr alloys for biomedical applications”

Yoon-Seok LEE (Tohoku University, Japan)

B32 “Low-cycle fatigue properties of single crystals in the Cu-Al-Mn superelastic alloy” Tomoe KUSAMA (Tohoku University, Japan)

B33 “Synthesis of porous Nb prepared by dealloying with metallic melt for electrolytic capacitor”

Joungwook KIM (Tohoku University, Japan)

B34 “Effect of Sulfur on Solid State Reaction between Fe-Mn-Si Alloy and Oxide Inclusion at High Temperature”

Kyung-Ho KIM (Tohoku University, Japan)

B35 “Observation of spin injection and inverse spin-Hall effect in La0.67Sr0.33MnO3” Daisuke KIKUCHI (Tohoku University, Japan)

B36 “Microstructural Analysis of Biomedical Co-Cr-Mo Alloy subjected to High-Pressure Torsion Processing”

Murat ISIK (Tohoku University, Japan)

B37 “Comprehensive Understanding of Organic Solar Cells Morphology Change upon Different Cooling Rates”

Wenchao HUANG (Monash University, Australia)

B38 “Hard and ductile SiC/SiO2 composite from CVD-produced core-shell powder by spark plasma sintering”

Zhenhua HE (Tohoku University, Japan)

B39 “Transference Number of Hydride Ion for Ca4ZrH10 under High Pressure” Akira HATAKEYAMA (Tohoku University, Japan)

B40 “Change in composition of molten steel, slag and inclusion during ladle treatment” Akifumi HARADA (Tohoku University, Japan)

B41 “Microstructural investigation on the effect of Si added in steel sheet on the formation of IMC layers during hot-dipping in 0.2wt.%Al-Zn bath at 450°C”

Kwangsik HAN (Tohoku University, Japan)

B42 “Flexible Dye Sensitized Solar Cells on ITO/PEN Substrate Using Ionic Liquid Electrolyte with Improved Stability”

Yu HAN (Monash University, Australia)

B43 “Spin Pumping in La1.85Sr0.15CuO4 at Room Temperature” S.M. HAIDAR (Tohoku University, Japan)

B44 “Fabrication of Ta particle reinforced Zr-based metallic glass matrix composites with tensile plasticity by in-situ dealloying method”

Wei GUO (Tohoku University, Japan)

B45 “Dissolution behavior of Ag-containing calcium phosphates in simulated body fluids” Ozkan GOKCEKAYA (Tohoku University, Japan)

B46 “Utilization of Oxidation Heat from Iron-Bearing Materials to Suppress CO2 Emission in Iron Ore Agglomeration Process”

Kazuya FUJINO (Tohoku University, Japan)

B47 “Sol-gel derived Ti-O-C fibre precursors for the development of TiC fibres” Paul FIRBAS (Monash University, Australia)

B48 “Variant selection in stress-induced martensite transformation in Fe-Ni-C alloys” Tadachika CHIBA (Tohoku University, Japan)

B49 “Orientation and morphology of Na-Al-O films deposited on polycrystalline AlN by laser CVD”

Chen CHI (Tohoku University, Japan)

B50 “Microstructure and mechanical properties of arc-melted ZrB2-ZrN eutectic composite”

Eric Jianfeng CHENG (Tohoku University, Japan)

B51 “Preparation and Electrode Properties of Composite Cathodes Based on Bi1-xSrxFeO3-δ

with Perovskite Structure” Doohyun BAEK (Tohoku University, Japan)