2018 corporate profile profile...a4-2 3a, solaris dutamas no. 1 jalan dutamas 1 sri hartamas, 50480...

A4-2-3A, Solaris Dutamas No. 1 Jalan Dutamas 1

Sri Hartamas, 50480 Kuala Lumpur, Malaysia

RS&GIS 2018 CORPORATE PROFILE

2018 CORPORATE PROFILE

DELIVERING

GEOSPATIAL INNOVATION, GEOSPATIAL INTELLIGENCE,

& GEOSPATIAL EXCELLENCE!

MAJOR ONGOING 2016 PROJECTS INCLUDE:

- PRIMARY CONTRACTOR (SURVEY & MAPPING SERVICES) FOR FEASIBILITY, PLANNING, DESIGN & CONTRUCTION OF THE 800KM PAN-BORNEO HWY

- AERIAL SURVEY & MAPPING SERVICES FOR SLOPE STABILISATION &

MONITORING OF THE 512KM PETRONAS SSGP PIPELINE

- SLOPE HAZARD MAPPING INITIATIVES FOR JMG & JKR

RS & GIS CONSULTANCY SDN BHD

A4‐2‐3A, SOLARIS DUTAMAS 3rd FLOOR, LOT 2766, BLOCK 10 NO. 1 JALAN DUTAMAS 1 BORMIL ESTATE COMMERCIAL CENTRE SRI HARTAMAS, 50480 JALAN TUN AHMAD ZAIDI ADRUCE KUALA LUMPUR, MALAYSIA 93150, KUCHING, SARAWAK MALAYSIA TEL +60 3 6207 8868 TEL +6082 412773 FAX +60 3 6207 8861




CORPORATE OVERVIEW

RS & GIS Consultancy (‘RS&GIS’) are one of the longest‐serving and most experienced providers of mapping solutions in Malaysia ‐ providing expert advice, intelligent information outcomes, and professional project support services, backed with proven mapping technologies, and innovative thinking to deliver real results to our clients. We are a privately‐held Bumiputra Status Company, incorporated in Malaysia in March 2006, operating from a base in Sri Hartamas, Kuala Lumpur, and providing services throughout Malaysia. Established and operated according to a long‐held commitment to form a professional Malaysian‐based geospatial services business, we have grown since our early days as a ‘boutique’ mapping company, into a diversified full‐service geospatial solutions provider, with an experienced and dedicated team of Malaysian‐based and Malaysian‐grown professionals, and backed by a pedigree borne from the successful execution of over 100 major mapping projects, and 60 airborne mapping campaigns, over the last decade. RS&GIS stands out from the field of Mapping ‘Entrepreneurs’ in Malaysia. Our business has evolved over the last decade to offer a genuine ‘full‐service’ capability. ‘Competing’ mapping‐solutions providers seem mostly intent on collecting reseller and distribution agreements from major industry suppliers (ESRI, Trimble, DigitalGlobe, etc) and competing lower‐level ‘niche’ brands for off‐the‐shelf’ technologies, software, and data products. RS&GIS, first and foremost, offer access to mapping service professionals, offering impartial expert advice and leading‐edge customized mapping programs. Mapping initiatives are generally built around distinctive issues or more complex challenges that require specialist data solutions and subject‐matter‐experts (whose analysis is dependent on relevant and accurate data). Survey and data acquisition systems, whether satellite, airborne, or field‐based, must be ‘fit‐for‐purpose’. The alternative is frequently summed up by a phrase commonly used in the mapping industry: ‘Rubbish In – Rubbish Out’. More recent developments and enhancements in our portfolio of mapping services and solutions include provision of end‐to‐end ‘Geo‐Design’ and Project Management services across the lifecycle for infrastructure development projects and work programs including Road, Rail, HEP, HVTL Design Engineering, Construction, & Maintenance, Integrated Rural & Urban Planning, Slope Stability & Landslide Hazard Assessment, Catchment Management, Flood Modeling, and Urban Drainage Design. The rationale is simple – Durable designs and optimal engineering outcomes are achieved by developing ‘fit‐for‐purpose’ data and information solutions, and applying these according to established geodesign principals. Good design is quickly forgotten; poor design will endure far longer, and reveal itself when the true Cost, Time, Effort, and Risk associated with resolving these become your next challenge.




RS&GIS target specific project & business needs with our technology and data‐based geospatial solutions and services. These could include diverse end‐user requirements such as:

EXPERT CONSULTANCY SERVICES PROJECT MANAGEMENT INTEGRATED GEOSPATIAL SERVICES & SOLUTIONS CORPORATE & PROJECT DATABASE SERVICES – DESIGN, DEVELOPMENT, AND DEPLOYMENT TECHNICAL SERVICES AND APPLICATIONS DEVELOPMENT TOTAL DATA SOLUTIONS ‐ ACQUISITION (FIELD, AIRBORNE, SATELLITE), ADVANCED DATA

PROCESSING AND ANALYSIS, DATA INTEGRATION, DATA PRESENTATION & VISUALITION

RS&GIS offer data & technology‐driven mapping services and solutions suitable for a broad spectrum of stand‐alone and integrated / multi‐disciplinary geospatial challenges, ranging fromnational‐scale initiatives to data and site‐ specific projects, and including:

ENVIRONMENTAL MAPPING & MONITORING SERVICES (INCL IMPACT ASSESSMENT) PRECISION AGRICULTURE VEGETATION & LANDCOVER IDENTIFICATION, CLASSIFICATION, AND CHANGE DETECTION FORESTRY / PLANTATION SERVICES (INCL INVENTORY, MONITORING, AND MANAGEMENT) LANDSCAPE SYSTEMS, LANDSCAPE ASSESSMENT, & ENGINEERING GEOLOGY LANDSLIDE HAZARD & RISK ASSESSMENT CATCHMENT MAPPING AND FLOW MODELING URBAN DRAINAGE & FLOOD MITIGATION DISASTER RESPONSE, HAZARD MITIGATION, & DESIGN SOLUTIONS MARINE OIL SEEP / SPILL DETECTION MAPPING / MONITORING OF SENSITIVE ECOSYSTEMS (HIGHLANDS, PARKS, COASTAL, ETC) URBAN PLANNING & DEVELOPMENT INFRASTRUCTURE PLANNING & DEVELOPMENT (INCLUDING FEASIBILITY STUDIES, PRELIMINARY

AND DETAILED ENGINEERING DESIGNS) CORRIDOR SURVEYS, ROUTE PLANNING & OPTIMISATION 3D‐FEATURE MAPPING, SIMULATION, AND VISUALIZATION GIS SYSTEMS AND GEODATABASE DESIGN, DEVELOPMENT, & INTEGRATION APPLIED GEOSPATIAL SOLUTIONS & INTELLIGENCE DEVELOPMENT SYSTEMS WEB‐BASED AND REMOTE MAPPING APPLICATIONS & INFORMATION DEPLOYMENT




RS&GIS have assembled a team of key industry professionals with a foundation of multi‐sectorial skills, expertise, and experience, to deliver professional advice, strategic intelligence, and proven know‐how developed across an array of industries, applications, landscapes and locations. RS&GIS invest significant effort and resources to stay at the forefront of developmental spatial technologies and industry trends. This enables us to offer leading‐edge & customized client and project solutions founded in principles of industry best‐practice, cost‐efficiency, risk reduction, cross‐discipline collaboration, optimized return‐on‐investment (and compliance to value‐ management measures), and ultimately assured project delivery. RS&GIS are leaders in developing applications and solutions based on remotely‐sensed data from a range of active and passive satellite, airborne, and ground‐based sensor systems, including:

MULTISPECTRAL HYPERSPECTRAL AERIAL LiDAR (WAVEFORM & DISCRETE) GROUND‐BASED LiDAR (TLS / MLS) THERMAL RADAR / SAR ORTHOIMAGE & OBLIQUE IMAGING CAMERAS

Our extensive experience with optimal survey design, sensor deployment, logistics and field support, data post‐processing, and integration of data towards the delivery of advanced information solutions can make a significant difference to your business. This can be coupled with hand‐on experience on a range of industry and sector‐specific softwares and technologies, including field survey and CAD systems, slope and landscape stability analysis, hydrological modeling, road and rail design and engineering, and much more. RS&GIS provide leading‐edge solutions in many aspects of acquiring and transforming data into detailed and accurate information solutions, customized to specific project requirements. These include automated and semi‐automated data processing routines and advanced algorithms for 3‐D object‐oriented processing of imagery, LiDAR, and ancillary data to provide multi‐dimensional feature identification, delineation, and database‐development solutions that have redefined the accuracy and relevance of datasets developed for applications such as landcover assessment and change‐detection, slope stability studies and landslide mitigation, engineering geology and GeoHazard studies, hydrological modeling and flood prediction, and also route selection, design, and engineering studies.




RS&GIS maintain an extensive archive of Malaysia‐Wide Geo‐Ready data, organized by theme, data source & processing level (raw, processed, or derived; satellite, aerial, or field‐derived), and location, compiled from 20 years of mapping operations around Malaysia. These can be used to establish a knowledge‐base and location‐intelligence to review and justify program and project designs, and then to create base‐maps that can be deployed at the time of project start‐up.

OBJECT‐ORIENTED FEATURE RECOGNITION FROM MULTIPLE DATA SOURCES




PARTNERSHIPS AND STRATEGIC ALLIANCES

RS&GIS supply remotely‐sensed data, and derived advanced information products, from an extensive list number of satellite and aerial platforms and providers, including:

PLATFORM / PROVIDER RAPIDEYE

DIGITALGLOBE LANDSAT TM / ETM (5, 7, 8)

EOS (MODIS / ASTER) TERRASAR‐X

SPOT IMAGING EO1 (HYPERION / ALI)

IFSAR (NEXTMAP) RS&GIS offer specific expertise in advanced airborne imaging and sensing systems, with broad experience in many types of airborne systems, and end‐end operational and data support and integration ‐ unequalled in Malaysia in terms of the collected experience, and extending to LIDAR, hyperspectral (CASI, HYMAP), Thermal, and optical imaging (orthocorrected and oblique) systems. RS&GIS offers these systems and services across Malaysia and the region. RS&GIS has a network of Strategic Service Partnerships and Industry Alliances to ensure that Subject‐Matter‐Expertise (SME) and 3rd‐Party Services can be closely aligned and integrated with our geospatial solutions, to support management systems and decision‐making. Traditionally this SME work would be delivered independent of primary study reports. RS&GIS integration services can incorporate complex 2‐D and 3‐D analytical models supplied by 3rd‐Party and SME contractors back into a GIS framework. Some of our Alliances and Partnerships include:

TECHNOLOGY PARTNER KEY SERVICES

HELIMAP SWITZERLAND AIRBORNE SURVEY SYSTEMS

AAS THAILAND

GPS LANDS / GEODELTA MALAYSIA SURVEY SOLUTIONS (TLS & MLS)

GEO RISK SOLUTIONS (GRS) HONG KONG ENGINEERING GEOLOGY

INDUFOR ASIA PACIFIC NEW ZEALAND FOREST & PLANTATION SERVICES

MANAGEMENT ARBONAUT FINLAND

SADM AUSTRALIA DATABASE & SOFTWARE SOLUTIONS

G&P PROFESSIONALS MALAYSIA

DESIGN & ENGINEERING FOR URBAN

DRAINAGE AND SLOPE WORKS MOHD ASBI & ASSOCIATES

SMART INFRA RESOURCES MALAYSIA UNDERGROUND UTILITY MAPPING

L & P ASSOCIATES MALAYSIA ROAD DESIGN

RHO‐1 / HYDEC MALAYSIA HYDROLOGICAL & FLOOD MODELING

TRIMBLE (QUANTM) USA ROUTE PLANNING AND OPTIMISATION




RS&GIS has secured projects and undertaken mapping work around the globe ‐ from Africa, to Australasia, SE Asia, and the Americas. We can compete, and stand against foreign industry leaders to both develop, and export, innovative geospatial applications and services. RS&GIS maintain links with a number of institutions for research and development of a range of geospatial technologies and applications. This includes crown‐counting and species identification algorithms, and world‐leading capabilities to perform optical water quality modeling and benthic habitat mapping. RS&GIS collaboratively developed innovative oil exploration solutions that provide cost‐ effective off‐shore basin screening services that have proven to improve early survey efficiency for offshore exploration provinces for the oil and gas industry. RS&GIS continue to develop advanced knowledge‐based geospatial‐based applications and solutions to address key challenges that present across Malaysia and the region, including support for feasibility, design and engineering, construction, monitoring, and management associated with infrastructure development, rural and regional planning, emergency response, and national development initiatives. The challenge posed by Malaysia’s 2020 Vision and the increasing sophistication and global integration of the economy, RS&GIS innovative technologies and services can enhance KPI measurements for your Organization or Project by optimising the efficiency and cost‐effectiveness of operations, lowering risk‐profiles, condensing project schedules, and improving information flow & decision‐making systems for more effective management & oversight.

OUR PARTNERS & THE RS&GIS TEAM

RS&GIS capabilities have grown around a core of experienced long‐term staff and recent graduates. Each team member brings unique skills to our business, and with ongoing Professional Development and a work environment that encourages multi‐tasking, RS&GIS continues to enhance its in‐house expertise and capabilities so we can offer our clients comprehensive geospatial support services and solutions for almost any project. RS&GIS is the pre‐eminent Malaysian‐based supplier of airborne survey services and solutions, offering in‐house whole‐of‐project expertise with both fixed‐wing and helicopter‐based aerial survey specification, aviation planning, acquisition, processing, integration, and advanced applications development. We measure our business against the professional development and capabilities of our staff towards meeting a diverse range of technical and commercial challenges presented to us, and as we offer increasingly sophisticated and customised technical and data solutions to our clients. RS&GIS are Partnered with Helimap (Switzerland) & Asian Aerospace Services (AAS) – recognized as leading suppliers of Aerial Survey Systems, Sensor Integration, & Mapping Services.




With our Partners, RS&GIS has established access to industry‐leading systems & experienced suppliers of aviation and aerial survey & support services, including turnkey aviation solutions, aircraft leasing, aerial survey operations and sensor systems integration, aircraft maintenance and servicing, flight management, and ground handling services.

Survey platforms include the revolutionary Diamond DA42 MPP survey platform, a twin‐ engine aircraft especially designed and configured to support multi‐sensor payloads and survey operations at maximum efficiency, with exceptional fuel efficiency, and capability for up to 10‐hours survey duration.

Flexibility with selection of aviation platform, and support for enhanced data specifications, is provided by our DCA‐approved Helicopter‐ based systems, with proven survey operation so far with the Eurocopter EC120 / EC135, and AS350 / AS355‐series of platforms. With access to a range of high‐end LiDAR sensors, imaging cameras, and multiple survey aircraft options, RS&GIS offer the ultimate range of flexibility with data specifications, and thereafter end‐to‐ end Project support across data acquisition, processing, and integration phases of your work. Ongoing professional development and skills diversification, R & D, applications development,




infrastructure upgrades, and technology transfer between our business partners help us to meet an growing demand for a comprehensive ‘one‐stop’ geospatial solution provider, with proven service excellence and professionalism, whilst delivering innovative and leading‐edge information products, whilst delivering on a promise of optimize outcomes and minimise project risk. RS&GIS client services and project support staff include local professionals that collectively represent the most experienced geospatial services team in Malaysia. Our expertise and skill‐base is broadly separated into GIS, Remote Sensing, and LIDAR Service teams. Extensive cross‐platform and multi‐disciplinary experience of our staff is a key feature of our innovative and evolving services and solutions. A defining feature behind the durability and success of RS&GIS is our people. We pride ourselves in having developed, a core team of dedicated geospatial professionals. A preview of the expertise, skills, and knowledge‐focus each RS&GIS team member is detailed herein for your review.

SKILLS MATRIX OF RS&GIS MANAGEMENT & STAFF

EXECUTIVE MANAGEMENT

AWG ABDULLAH BIN AWG ABD

RAZAK

Market Development Strategic Business Development

Managing Director Human Resource Development Engineering Applications Client Relations

NILS C G MATTHEWS

Business & Technology Systems Development Multi‐Disciplinary Geospatial Applications

Operations Manager Environmental and Geomorphologic Applications

Landscape Systems Project Management

PROJECT & OFFICE MANAGEMENT

CHOY KAM THYE Office Management

Business Development Project Management

Project Management Advanced & Applied Geospatial Services Data Management & Integration Business Development

MOHAMED ZAFIR Business Development Project Management

Project Management

Advanced & Applied Geospatial Services

Systems Integration

Business Development

RAZUWA HANIM / INTAN SHAHEERA

Human Resource Administrator

Office Management & Support

MOHD RAZIF / YUSLISULIANA

SUHAILYN

GIS Services Advanced GIS Applications, Systems, & Analysis

Project Management Advanced GIS Solutions Development

Integrated Geospatial Solutions Data Integration / Management

GIS / Web Deployment Advanced WebGIS Development & Deployment

Systems 3D‐Model Development




NOOR IMRAN B NOOR IZHAM

Senior Project Engineer

Project Management Advanced & Applied Geospatial Services Systems Integration Business Development

FAISAL SYAFIQ BIN ABD RAZAK

Geologist / GIS Analyst Project Management Advanced & Applied Geospatial Services Geological Analysis

NARAH MAY STUART

GeoDataBase Design Consultant

GIS, Management Systems, & Design Intelligence GeoDataBase Design & Development Complex GIS Systems

GIS System POH CHIEK JIU Senior GIS Analyst WebGIS Development

Server Maintenance

MOHD AFIFI CAD Services & Integration Data Production Routines

WebGIS Support

Advanced CAD Systems

Applied GIS Services

Data Integration / Management

Applied WebGIS Deployment

LIDAR SERVICES

AHMAD SYUWARI LiDAR Services

Project Management Research & Development

LIDAR Project Management Advanced LIDAR Classification Advanced LIDAR Applications & Processing 3D Model Development

AL-HAFFIZ RADZAK

LiDAR Services Project Integration

QA/QC

LIDAR Data Management & Integration

Advanced LIDAR Data Handling

Advanced LIDAR Classification

Advanced LIDAR Processing

SITI ZUBAIDAH LiDAR Services

Project Integration Data Production Systems

LIDAR Data Management & Integration

Advanced LIDAR Data Handling / Data Production

Advanced LIDAR Project Integration

3D Model Development

NUR KHAIRUNNISA

LiDAR Support Services Data Production

Applied LIDAR Data Handling

Applied LIDAR Classification

Applied LIDAR Processing

IMAGE SERVICES

AHMAD MUJIB Remote Sensing Services

Project Management Image Production

Applied GIS / Remote Sensing Advanced Object‐Oriented Image Classification GIS / Remote Sensing Project Support

MAIZATUL MAZURA / AINA

LIYANA

Data Production Routines Classification & Feature

Extraction Routines

Advanced Object‐Oriented Image Classification

Applied LiDAR & Remote Sensing Systems

Project Support

AVIATION & FIELD SURVEY

MOHD RAZIF Field Survey Manager

Business Development Support

Land Survey Systems Field Support Management Field Logistics Management




AHMAD ZIADULKHAIR

Aerial Survey Systems Aviation Navigation Field Survey Support

Multi‐Platform Aerial Survey & Navigation

Sensor System Operation & Integration (6 Yrs)

Field Support & Logistics

PROJECT SUPPORT (PART‐TIME)

SHAHRUL NIZAM / MUHAMMAD

AQMAL

Project Support (LiDAR, Remote Sensing, GIS)

Applied Remote Sensing & GIS Processing Applied LiDAR Processing & Integration Project Support Services 3D Visualisation & Model Development

RS&GIS evaluates potential recruits through Industrial Training Programs operated in conjunction with local Higher Education Institutes and Universities. Specific expertise drawn from our local and foreign technology partners complements our in‐house capabilities as required.




CORPORATE INFORMATION

BUSINESS ADDRESS A4‐2‐3A, SOLARIS DUTAMAS NO. 1 JALAN DUTAMAS 1 SRI HARTAMAS, 50480 KUALA LUMPUR, MALAYSIA COMPANY REGISTRATION 725410 – T DATE OF INCORPORATION 02 MARCH, 2006 MOF REGISTRATION K22028708591132274 (to 21/04/2016) BUMIPUTRA CERTIFICATION BP22028708591132274 (to 21/04/2016) GST REGISTRATION 000577028096 ACCOUNT AUDIT STATUS AUDITS COMPLETED UP TO YE 2014 SOLICITORS BANKERS WAN MUHAMMAD AMIN BIN WAN YAHYA RHB BANK (WAN M AMIN & KARLOS) SRI HARTMAS BRANCH 81‐M, PLAZA DAMANSARA B2‐08 & B2‐09 BLOCK B, PLAZA DAMAS 3 JALAN MEDAN SETIA 1 NO 63, JLN SRI HARTAMAS BUKIT DAMANSARA, 50490 SRI HARTAMAS, 50480 KUALA LUMPUR, MALAYSIA KUALA LUMPUR, MALAYSIA COMPANY SECRETARY AUDITOR YIP LIAN TEN T. SIM & CO (AF1249) CHARTERED ACCOUNTANTS 568‐9‐30, 9TH FLOOR, KOMPLEKS MUTIARA 568‐9‐36, 9TH FLOOR, KOMPLEKS MUTIARA 3 1/2 MILES, JALAN IPOH 3 1/2 MILES, JALAN IPOH 51200 KUALA LUMPUR 51200 KUALA LUMPUR MALAYSIA MALAYSIA




FEATURE ‐ 3‐D LASER SCANNING & 3600 HEMISPERICAL IMAGING SERVICES

RS&GIS PROVIDE A RANGE OF SENSOR AND PLATFORM OPTIONS FOR PROJECTS REQUIRING AERIAL AND GROUND‐BASED LASER MAPPING AND 3600 HEMISPHERICAL IMAGING SYSTEMS. IMMERSIVE 3‐D DATA LAYERS AND INFORMATION SOLUTIONS CAN BE CUSTOMISED FOR YOUR APPLICATION. LIDAR IS NOT A ‘ONE‐SIZE‐FITS‐ALL’ MAPPING TOOL

The specification and customization of sensor, survey, and data parameters for any project or application is both an art and a science, learned from many years of project works, trial & error, and research into user‐requirements and optimal data solutions to resolve specific challenges or issues at hand. We note some LiDAR specifications included in project design and tender documents that may be 10 years or more out‐of‐date. Be aware ‐ data specification can shape project outcomes. RS&GIS SPECIALISE IN DEVELOPING CUSTOM SPECIFICATIONS FOR YOUR APPLICATION FROM ALS, MLS,

AND TLS DATA TECHNOLOGIES TO OPTIMISE PROJECT OBJECTIVES

Powerful simulation‐ready data sets and 3‐D models can be produced by the integration of LiDAR and orthoimage data (and many derivatives of these), with supporting layers (ancillary and 3rd‐party data sources), and building applications such as landcover classification routines around spatial patterns identified in data with object‐oriented feature‐recognition technologies. Algorithms customized‐for‐purpose assists with standardization, and automation, of data processing routines. Increasing levels of information‐intelligence can deliver outcomes that can significantly enhance both business and studies, well beyond the value of the initial investment in this data. Innovative solutions are developed through collaborative effort between industry‐experts and the RS&GIS team, to deliver outcomes suited for a diverse range of end‐users, applications, and budgets. Optimal design and engineering solutions are subject to the acquisition of data that best represents the landscape, and the scale of the geomorphic processes influencing it, with sufficient detail and accuracy for the application. Well‐designed data solutions deliver the information infrastructure (‘infostructure’) that promotes superior decision‐making and project outcomes. These may include; improved hazard and risk assessment and mitigation models; design solutions appropriate to specific engineering challenges; optimized and cost‐effective work programs; and ultimately significantly lowered project risk and maintenance profiles as landscape processes (such as terrain and hydrological control and influence on Geo‐Hazards,) are better identified and understood.




RAIL CORRIDOR MAINTENANCE & UPGRADE

ROAD SLOPE HAZARD & RISK ASSESSMENT




FOREST INVENTORY & CARBON ACCOUNTING

URBAN DRAINAGE & SLOPE HAZARD STUDIES




FEATURE ‐ DESIGN, ENGINEERING, & MODELING SOLUTIONS

EMERGENCY RESPONSE & SITE REMEDIATION




FULL SERVICE SUPPORT FOR ROUTE OPTIMISATION, ROAD DESIGN & ENGINEERING




CATCHMENT MANAGEMENT & FLOOD MITIGATION STUDIES




RS&GIS specialize in developing programs to deliver improved geomatics‐based outcomes based on extensive project experience and consultation with industry and end‐users that identify and enhance information layers vital to resolving key challenges facing specific industries or locations. A good information solution will support the development of effective and durable design solutions ‐ most suited to overcoming specific engineering challenges, and thereafter support the functions to deliver a cost‐effective work program. This will ultimately result in significantly lowering project risk and the long‐term maintenance profile for engineering and infrastructure works, since landscape processes and other influential parameters have been better identified and understood (such as terrain and hydrological influence on creating, and controlling, geo‐hazards). Solutions from RS&GIS also consider:

VALUE‐MANAGEMENT (VM) REQUIREMENTS OF THE MALAYSIAN GOVERNMENT (EPU) A RESPONSE TO KEY SHORTCOMINGS IDENTIFIED IN EXISTING WORKS OR PROGRAMS BY

INDUSTRY PEERS, THE MALAYSIAN AUDITOR‐GENERAL, OR OTHER EXPERT REVIEW GROUPS DELIVERING A DURABLE & LASTING INFORMATION LEGACY TO ENSURE ONGOING RELEVANCE

THROUGH THE PROJECT AND INFRASTRUCTURE LIFECYCLE COINCURRENT DESIGN & DEVELOPMENT OF KNOWLEDGE‐BASED MANAGEMENT &

DECISION‐SUPPORT SYSTEMS, INTEGRATION OF ADVANCED DATA INPUTS FROM 3RD‐PARTY SUBJECT MATTER EXPERTS, GEODATABASE (GBD) DESIGN, AND IT SUPPORT INFRASTRUCTURE

AN OPTIMISED WORK SCHEDULE & WORK FLOW THAT REPRESENTS AN OPTIMAL PATH FOR PROGRESSION OF THE PROJECT, AND TO MINIMISE OR ELIMINATE ANY DATA‐RELATED DESIGN FLAWS, DATA ACQUISITION OR PROCESSING BOTTLENECKS, AND ANY DUPLICATION OR REDUDANCY OF SERVICES AND LIKEWISE, ANY EFFICIENY GAINS THAT COULD BE REALISED

A PLAN FOR EXPEDITED DEVELOPMENT OF PROECT BASEMAPS AND CRITICAL‐PATH DATASETS, AND INCLUDING INTEGRATION OF ANY EXISTING ARCHIVED DATA SETS

RAPID DEVELOPMENT AND DEPLOYMENT OF A DEDICATED WEBGIS SERVICE TO IMPROVE PROJECT COORDINATION

IMPLEMENTING KEY MAPPING TECHNOLOGIES THAT SERVE A FUNCTION TO ‘BRING THE FIELD BACK TO THE OFFICE’, AND THAT SUPPORT PROJECT REVIEW AND DECISION MAPPING

APPLYING BEST‐PRACTICE TO MAPPING SERVICES AND SOLUTIONS THAT MINIMISE PROJECT RISK AND OPTIMISE OUTPUT AND EFFICIENCY

OUR CLIENTS

Our clientele is a reflection of our capabilities to respond to a diverse range of mapping and user requirements, from within Malaysia, across the region, and beyond. Clients of RS&GIS include:

BHP BILLITON (AUSTRALIA) WOODSIDE ENERGY (AUSTRALIA) REPSOL – YPF PETROLEUM (SPAIN) RESOURCES MANAGEMENT (AUSTRALIA) PTY LTD (AUSTRALIA) DRB‐HICOM BERHAD (MALAYSIA) KLANG MUNICIPAL COUNCIL (MPK) (MALAYSIA) ASTRONAUTIC TECHNOLOGY (M) SDN BHD (MALAYSIA) MINISTRY OF SCIENCE, TECHNOLOGY, & ENVIRONMENT (MOSTE) (MALAYSIA)




PLACER DOME (AUSTRALIA) PETRONAS CARIGALI (MALAYSIA) KUALA LUMPUR CITY COUNCIL (DBKL) (MALAYSIA) TNB TRANSMISSION / TNB RESEARCH (MALAYSIA) DEPT OF ECONOMIC DEVELOPMENT / CROWN MINERALS (DED) (NEW ZEALAND) NATIONAL OIL COMPANY OF LIBYA (NOC) (LIBYA) MURPHY OIL (USA / MALAYSIA) NEWFIELD OIL (USA / MALAYSIA) DIGITALGLOBE INC (USA) BSMART TECHNOLOGY SDN BHD (MALAYSIA) NATIONAL MINING COMPANY (OMAN) DUNDEE PRECIOUS METALS (SERBIA / BULGARIA) PERSEUS MINING LIMITED (GHANA / IVORY COAST / KYRGYZSTAN) SOUTHERN CHINA RESOURCES (CHINA) DEPT OF ENVIRONMENT / WATER & RIVERS COMMISSION (WRC) (AUSTRALIA) MALAYSIAN PALM OIL BOARD (MPOB) (MALAYSIA) TWINZA OIL (MYANMAR) BATAVIA MINING / TENNANT CREEK GOLD (AUSTRALIA) JURUKER BERJASA / PERBADANAN BEKALAN AIR (MALAYSIA) GUE & PARTNERS / WIJAYA BARU (MALAYSIA) PADANG MAJU BINA (MALAYSIA) HIKMAT ASIA (MALAYSIA) SAPURA DEFENCE (MALAYSIA) NACAP (NETHERLANDS) MOHD ASBI & ASSOCIATES (MALAYSIA) SAMLING / KTS / GRAND PERFECT (MALAYSIA) NAIM CENDERA (MALAYSIA) ENERGY METALS (AUSTRALIA) HOCK SENG LEE / JURUTERA JASA (MALAYSIA) HLA ASSOCIATES / DR NIK & ASSOCIATES (MALAYSIA) IKRAM (MALAYSIA) MALAYSIA NATURE SOCIETY / WORLD WILDLIFE FUND (MALAYSIA) JABATAN PENGAIRAN DAN SALIRAN SABAH (MALAYSIA) JABATAN KERJA RAYA SARAWAK (MALAYSIA) SARAWAK ENERGY BERHAD (MALAYSIA) PEGIS (MALAYSIA) SINO‐FOREST (CHINA) GUYANA FORESTRY COMMISSION (GUYANA) INDUFOR ASIA‐PACIFIC (FINLAND / NEW ZEALAND) LEBUHRAYA BORNEO UTARA SARAWAK (MALAYSIA) INSTITUT PENYELIDIKAN HIDRAULIK KEBANGSAAN MALAYSIA, NAHRIM (MALAYSIA)

MAJOR PROJECT EXPERIENCE

RS&GIS has a lengthy record of carrying out stand‐alone mapping projects, and also participating in integrated work programs for major mapping initiatives across Malaysia. Up to today, we continue to engage as part of multi‐disciplinary teams on a number of significant and ongoing Projects. A summary of some of our more significant survey and mapping works, undertaken across Malaysia since 2008, is presented here for your review. This summary is representative of our extensive knowledge‐base, collaborative cross‐sector project experience, and the capabilities available across our business, which together have helped build our reputation as a pre‐eminent source of professional and impartial mapping advice, and provider of leading‐edge geospatial services and solutions across Malaysia, with an enviable record of Information & Technological Innovation, Dedication to Client and Project Success, and ultimately delivery of each Project have been engaged upon




PROJECT END‐CLIENT KEY SERVICES & SOLUTIONS

GEOSPATIAL DATA CONSULTANT FOR KUALA LUMPUR - SINGAPORE HIGH SPEED RAIL 2018*

MYHSR CORPORATION

SDN BHD

Provision of Geospatial Data Consultation Services. The scope comprises of two major disciplines which are GIS and BIM. Responsibility: i. To set up GIS environment for the client ii. Prepare Technical Specification and Guidelines for GIS and BIM iii. Facilitate BIM implementation in the project.

PROPOSED SANTUBONG CABLE

CAR 2018* ENVISAR

Santubong - provide technical services for 3D model proposed Santubong cable car design in term of digital terrain model (DTM) and contour. Visual interpretation for the suitability height area from different view angle to that project site. Provide material for client's EIA report

RH ECOPARK 2018* ENVISAR

Provide technical analysis for RH Ecopark area such as Contour, DTM and map production. Prepare some part of material for client's EIA report impact assessment into the RH Ecopark area.

PERKHIDMATAN PERUNDING BAGI

PENYEDIAAN PELAN PENGURUSAN LEMBANGAN

SUNGAI BERSEPADU (IRBM), SG. PADAS, SABAH

2018*

SENIE ASSOCIATES SDN

BHD

Provision of 1.5m high spatial resolution, SPOT satellite image, suitable for mapping at 1:7 500 scale, inclusive of basic image processing services like image correction, image enhancement and compression. Provision Data input for SPOT Imagery. Designed to provide a rapid mapping of Land cover Mapping. Pre-processing and Modelling & Object Oriented Feature Extraction

PROVISION OF GIS + BIM TO SUPPORT

UTILITIES RELOCATION

WORKS 2018*

KONSORTIUM URW

BIM Management and BIM Modelling specialist services for the utilities relocation works (Stage 3). Third party BIM checker consultancy services for phase 1 & projects associated to BIM development.

AERIAL SCANNING FOR ENGINEERING

DESIGN AND DEVELOPMENT OF

PENSTOCK ALIGNMENT OVER

SG. PELUS & SG. YUM, PERAK

INCLUDING THE FOLLOWING PENSTOCK

ALIGNMENT 2018*

WATER ENGINEERING TECHNOLOGY

SDN BHD

Scope of works; i. Desktop Study - Base Map-Development (Survey Planning) ii. Ground Control Point & GPS Survey for Aerial Survey Support iii. Airborne LiDAR (ALS) & Orthoimagery - Acquisition and Base Data Processing Services iv. LiDAR & Orthoimage Acquisition v. LiDAR Base Processing & Delivery vi. Orthoimage Base Processing & Delivery and Geospatial Support Services





PERKHIDMATAN

MENGUMPUL DAN MEMBEKAL DATA-DATA HIDRAULIK

KAWASAN TADAHAN SUNGAI SARAWAK

UNTUK NAHRIM 2017

NAHRIM

Provision the Airborne Lidar and Ground Survey Data acquisition, processing and analysis services along Sarawak River. The output should be providing them with hydraulic data such as for town drainage network and river catchment. The objectives are to delineate the river catchment and data inventory to know the causes of river pollution at Sungai Sarawak catchment.

DEVELOPMENT AND UPGRADING OF THE

PROPOSED PAN BORNEO HIGHWAY, FOR EXISTING FOUR

LANE CARRIAGE WAY (RED LINE) AND

OVERTAKING LANE (OTL) 2017

LEBUHRAYA BORNEO UTARA

Provision the Airborne Lidar and Ground Survey Data acquisition, processing and analysis services to support all assets rehabilitation and strengthening works for the existing four lane dual carriageway (Red Line) and overtaking lane (OTL). The services are including Lidar Data Product such as generating contour lines, Digital Surface Model (DSM), Digital Terrain Model (DTM). By generating land cover mapping and feature extraction for geospatial analysis using Orthophoto imagery.

PROPOSED


PROPOSED PAN BORNEO HIGHWAY

IN THE STATE OF SARAWAK, PHASE 1

GIS & BIM 2017-2021*


The dual carriageway road construction works is approximately 800km in Phase 1. With the combination of GIS + BIM (Building Information Modelling) system is to be used throughout the Pan Borneo Highway project life cycle to minimize errors and discrepancies during construction stage. This method can visually monitor and track Work Package contactor’s project progress by using BIM models, UAS (Unmanned Aerial Vehicle System) monitoring and 4D Simulation. Then, to assist on coordination and checking of design, construction and as built information and establish 3D as built model (LOD 500) that comply to the basic RMMS requirement for handover to respective government authority.


PRPOSED PAN BORNEO HIGHWAY

IN THE STATE OF SARAWAK

PHASE 2 2017-2018*


Responsible for the execution of Airborne Laser Survey Data Acquisition, Processing and Delivery to Lebuhraya Borneo Utara that that provide the Calibration Points Site (CPS) for checking and calibrating the LiDAR data. LiDAR data survey must be simultaneously capturing the digital aerial imagery (Orthophoto) with the features extraction and geospatial support services. Generated contour lines, Digital Surface Model (DSM) and Digital Terrain Model (DTM) from LiDAR.





PERKHIDMATAN BAGI PENDIGITAN

IMEJ DAN SEMAKAN PANGKALAN DATA

(1:5000) GEOSPATIAL NEGARA 2016-2018*

JABATAN UKUR DAN PEMETAAN

MALAYSIA (JUPEM)

Provision with digitizing and verify with site verification together with GPS survey. All the features and details must be referring to the JUPEM reviewer rules. Result accuracy are based on various reviewer rules that consist of four rules are Attribute, Topology, Seamless and Spatial Check. Final map output A3 and A1 size are produced for JUPEM checking and verification.

LIDAR -ORTHOPHTO AND GIS FOR PAN

BORNEO HIGHWAY PHASE 1 2015-2017


Provision of comprehensive Lidar & geospatial services and solutions design to support and enhance the Proposed development and upgrading of the Pan Borneo Highway, Sarawak with a corridor of ~800km x 500m (~40,000 ha). The estimated accuracy that was offered for This project was a Z sigma <10cm and XY sigma of 10cm. The complete survey was bounded to a polygonal of Primary benchmarks (LBU) points (each 15km) measured by GNSS and computed from MyRTK permanent station (JUPEM). This computation has been made by the appointed licensed surveyor and provided coordinates have been used to compute the data. Geospatial part on Gis mapping output and asset data inventory reports.

SUPPLY OF RASTER DTM & DSM FOR KELANTAN 2016

DIGDAT SDN BHD/ UTM

Processing of LiDAR & Orthoimagery, and produced Digital Terrain Model (DTM) & Digital Surface Model DSM). River structures also produced for flood studies.

ENGINEERING GRADE AIRBORNE LIDAR & PHOTO SURVEY FOR ROAD DESIGN WORK

2016

L & P ASSOCIATES JKR SARAWAK

Engineering Grade Airborne Lidar & Photo Survey to support of detailed engineering road design work for Upgrading Jalan Kampung Saeh, supervison by Jabatan Kerja Raya Sarawak. Classified Lidar Strike Point in LAS, Raster grid Digital Terrain Model (DTM) 05.m and Digital Surface Model (DSM) 0.5m are produced for these Assessment. Contour 0.5m and 1m interval with Final Orthophoto 5m resolution also produced. RS&GIS provide various deliverable for analysis to support of the Engineering road design work in the project area. Assessment of preliminary design and engineering solutions for slope hazard reduction

PROVISIONAL PALM TREE CENSUS

INFORMATION ON APL ESTATE 2016-

2017

KRONOS PLANTATION SDN

BHD & FELDA GLOBAL VENTURE

(FGV)

Processing of high accurate orthorectification for archived Digital globe High Spatial Resolution Satellite Imagery for provisional palm tree census information to support technical due diligence assessment on APL Estate project.

SATELLITE IMAGERY MAPPING & GIS ANALYSIS TO OIL

PALM ESTATE 2016

FELDA GLOBAL VENTTURE (FGV)

Processing of high accurate orthorectification for archived Digital Globe High Spatial Resolution Satellite Imagery with 0.5m spatial resolution, with input of ground survey control point (GCP). Processed UAV image, CAD layer and other GIS compatible data to produce the Oil Palm Inventory database for GIS Analysis





FEASIBILITY STUDY FOR PROPOSED

ROAD & TUNNEL PROJECTS IN PENANG

2014 ‐ 2015*

JURUTERA KONSULT MAJU (JKM) JABATAN

KERJA RAYA (JKR) PENANG

Provision of comprehensive geospatial and engineering design services to support a feasibility study for 3 new proposed road and tunnel projects in Penang. Services include the integration of LiDAR and orthoimage data for a multi‐disciplinary Project team, GIS database development, WebGIS deployment, and deployment of the Quantm route alignment optimisation system.

HULU TERENGGANU HYDROELECTRIC

(HEP) PROJECT 2013 ‐ 2014

TENAGA NASIONAL BERHAD

Provision of LiDAR & Orthoimage survey, database development, and geospatial analysis and support services to Project Consultants for design, engineering, and construction of the Hulu Terengganu HEP complex. RS&GIS delivered a mapping solution that optimized HEP planning and design works, and helped reduce estimated earthworks budget by over RM50M during the first phase alone. A substantial increase in reservoir storage was identified over initial design estimates. This supported a 20% increase in generating capacity and an upgrade of turbine rating, leading to significant upgrades in expected revenue across the Project lifecycle. An ROI exceeding 100:1 was achieved on the initial ‘investment’ made in mapping services from RS&GIS.

KLANG VALLEY 1:5000

TOPOGRAPHIC MAP 2013

JABATAN UKUR DAN PEMETAAN

MALAYSIA (JUPEM)

Processing of LiDAR & Orthoimagery, and detailed Thematic Feature Extraction for update of the JUPEM 1:5,000 Topographic Map Sheet Series for 20 Tiles across the Klang Valley.

SLOPE HAZARD AND RISK ASSESSMENT

FOR KUALA LUMPUR 2013 ‐ 2014

DEWAN BANDARAYA

KUALA LUMPUR (DBKL)

Provision of comprehensive geospatial services and solutions designed to support and enhance a slope hazard and risk assessment study across 245 sq km extent of Kuala Lumpur. RS&GIS provided comprehensive feature extraction, data integration, and database development from newly acquired LiDAR data and Orthoimagery, to support development of a Landslide Hazard and Risk Assessment System (KULSIS) at DBKL. The database also supports diverse urban planning and survey applications across DBKL, inclkuding the assessment of preliminary design and engineering solutions for slope hazard reduction.

BUKIT SETIAWANGSA SLOPE MONITORING

AND PROFILING SERVICES 2013

IKRAM ISLAND & PENINSULA

Emergency monitoring and survey with TLS scanning technologies at a significant slope failure in Kuala Lumpur, to provide hourly monitoring of slope movement and then profiling and survey services across an extensive area of unstable hill‐slope in a complex urban landscape.

PACKAGE SERVICES ‘AIRBORNE SURVEY

AND DESIGN FOR TNB NEW

POWERLINE ALIGNMENT

TENAGA NASIONAL

BERHAD (TNB) REMACO

Project Management Consultancy (PMC) services, including airborne LiDAR and orthoimage survey, route selection and optimisation, HVTL design, and field survey across 80 km of existing and proposed HVTL, for the high‐ technology industrial and chemical complex being developed by Petronas at Pengerang, Johor.




- PENGERANG‐TANJUNG LANGSAT’ PENGERANG

2013 ‐ 2014

TENAGA NASIONAL

BERHAD (TNB) REMACO

RS&GIS services included comprehensive ground survey, route selection and planning, bathymetric survey, ALS and TLS scanning, 3D‐route visualisation, database development and integration to support application of powerline design software solutions from PLS‐CADD and Trimble, production of design drawings, and complete way‐leave survey and land acquisition services. For this Project, RS&GIS developed an innovative ‘Hybrid’ land survey system that reconciles modern and traditional survey techniques and technologies, and was accepted by JUPEM. This Hybrid approach works to identify and minimise errors in survey closure, resolve issues arising from missing boundary markers or conflicting survey records, and ultimately reduce or eliminate potentially costly and lengthy delays in the land acquisition process related to disputed land parcel (cadastral) boundaries.

BINTULU URBAN DRAINAGE

MASTERPLAN 2013

BINTULU DEVELOPMENT

AUTHORITY (BDA)

Provision of advanced airborne LIDAR and Orthoimage survey services, GIS database development, and drainage feature extraction across Bintulu to support the delivery of 'Civil and Structural Consultancy Services for the Proposed Drainage System Along Jalan Sibiyu, Bintulu'

JALAN ENTABAI ‐ ENGKAMOP DAN JALAN ENTABAI ‐ RANTAU LIMAU,

BAHAGIAN SARIKEI, SARAWAK 2013

MINISTRY OF RURAL &

REGIONAL DEVELOPMENT

Provision of comprehensive geospatial solutions to support detailed route selection, planning, and design process for over 50km of proposed rural roads near Sarikei, Sarawak. Services included provision of advanced airborne LIDAR and Orthoimage survey, GIS database development, and the deployment of advanced automated route design and optimisation (QUANTM) software and services. Route selection, earthworks optimisation, cost estimation, and completion of the PED design process, including production of design drawings to support preparation of tender documents, was completed in a record 3 weeks.

SABAH ROAD SLOPE LANDSLIDE HAZARD

MAPPING & MITIGATION PROJECT

2012 ‐ 2013

JABATAN KERJA RAYA (JKR) MALAYSIA

Complete Spatial Data Acquisition and Database Solutions from Airborne Laser Scanning, High‐Resolution Digital Imaging Cameras and Immersive 360o video capture, combined with GIS Data Processing and Integration Services to support the JKR Slope Stability Assessment System. Project included deployment of multiple airborne and field‐based sensor systems, which expedited data acquisition for the development of essential project terrain and image databases in only 4 months, along 1,500 km of Federal Roads in Sabah. Crucial aerial and ground‐based datasets were integrated to provide a web‐enabled knowledge‐based information system to the Project. RS&GIS introduced key technologies to support key NSMP recommendations, and also future development of RMMS systems required by KKR.




BEAUFORT‐TENOM RAIL CORRIDOR

UPGRADE STUDY 2012 ‐ 2013

MINISTRY OF TRANSPORT (MOT) KERETAPI TANAH MELAYU BERHAD

(KTMB)

Implementation of leading‐edge multi‐sensor laser‐based mapping solutions, involving integrated ALS, MLS, TLS, satellite and orthoimagery for detailed corridor mapping, with engineering and slope /drainage design support services also provided. A comprehensive Web‐enabled GIS system was developed for the project, to coordinate Datasets, a diverse Project Team, 3rd‐Party SME’s, and also support day‐day operations of the Project. RS&GIS independently conducted a preliminary Engineering Geology‐based landscape study and review of Geohazards along the route, using experts and expertise from the Hong Kong LSMP Landslide Program.

3D DIGITAL URBAN DATABASE

DEVELOPMENT 2012 ‐ 2014

PAVILLION GROUP

Extracting 3D‐Built Structures & 2D‐Topographic data layers from high‐resolution airborne LIDAR and Orthoimagery, to support urban planning and design solutions for development sites across Kuala Lumpur.

BUKIT BENDARA FUNICULAR 3D‐SLOPE

HAZARD MAPPING 2012

IKRAM

Detailed ground‐based TLS survey and 3D‐feature extraction to support engineering and slope repair and mitigation works along the Penang Hill funicular, extending 2km along a challenging 45‐degree track. Over 200 individual TLS survey stations were integrated.

SG KLANG ‘RIVER‐OF‐LIFE’ PROGRAM 2012

PEMANDU Detailed database development services to support planning and design solutions for the revitalization and rehabilitation of Sg Klang and its surrounds.

PITAS FLOOD MITIGATION MASTER

PLAN STUDY 2010 ‐ 2011

JABATAN PENGAIRAN DAN

SALIRAN (DID) SABAH

Provision of advanced integrated satellite and LiDAR acquisition and processing over Pitas, Sabah, for Flood Mitigation modeling, analysis, and planning.

PENANG ISLAND / BUKIT KANADA (MIRI‐ SARAWAK) LANDSLIDE HAZARD MITIGATION

2010 ‐ 2011


IKRAM

Airborne LiDAR and Orthoimage survey and comprehensive database development services to support Slope Management and Landslide Hazard Assessment & Risk Mitigation Studies recommended under the NSMP.

WEST MALAYSIA ROAD SLOPE LANDSLIDE

HAZARD MAPPING & MITIGATION PROJECT

2010 ‐ 2012


IKRAM

Complete Spatial Data Acquisition and Feature Extraction by Airborne Laser Scanning, High‐Resolution Digital Imaging Cameras and Immersive 360o video capture, coupled with GIS Data Processing and Integration Services to support a National Program for Road Slope Inventory and Risk Assessment System recommended under the National Slope Master Plan (NSMP)

CAMERON HIGHLANDS 2010

LiDAR and Orthoimage survey for topographic and vegetation mapping to support development planning

MIRI STORM‐WATER MANAGEMENT &

DRAINAGE MASTER PLAN 2010


SALIRAN (DID) MALAYSIA

LiDAR and Orthoimage survey with database development services and solutions to support storm‐ water management and detailed urban drainage design works.




MIRI INTEGRATED SHORELINE

MANAGEMENT PLAN (ISMP) 2009 – 2010



Comprehensive database development from LiDAR and Orthoimage survey, satellite imagery, and field survey and data collection to support Integrated Coastal Zone Management Planning and modeling of coastal processes

PROJEK BARU DI BAWAH SARAWAK

CORRIDOR OF RENEWABLE ENERGY

(SCORE) DEVELOPMENT 2009 ‐

2010

JABATAN KERJA RAYA (JKR) SARAWAK

Delivery of advanced data services and solutions for rapid optimised route planning and design for 350 km of rural roads across SCORE. RS&GIS acquired and integrated satellite, LiDAR, Orthoimagery, and Field Survey data acquisition, processing, and integration for JKR Sarawak & 27 Design and Engineering consultants. RS&GIS delivered a comprehensive data solution to support road design, at a cost saving up to 90% compared to traditional field survey.

RAJANG & MURUM

HYDRO‐ELECTRIC (HEP)

FEASIBILITY STUDIES

2009 ‐ 2010

SARAWAK ENERGY BERHAD (SEB)

Provision of advanced integrated satellite and LiDAR‐ based geospatial data solutions and services for HEP Project design, inundation and reservoir assessment, and dam site planning, design, and engineering.

PERLIS STORM‐WATER

MANAGEMENT &

DRAINAGE MASTER

PLAN 2009



Provision of advanced integrated orthoimagery and LiDAR‐based airborne geospatial data solutions and services for urban drainage and storm‐water management planning

MELAKA FLOOD MITIGATION MASTER

PLAN STUDY 2009



LiDAR survey and database development to support detailed 2‐D flood modeling and analysis for the Melaka Flood Mitigation Master Plan. Provided support and data integration for leading hydrological modeling software and services from flood design engineers, including dynamic time‐series flood models, analysis, and presentation

SUNGAI GOLOK FLOOD PROTECTION SCHEME

2008

JABATAN

PENGAIRAN DAN

SALIRAN (DID)

Provision of advanced integrated satellite and LiDAR‐ based airborne geospatial data solutions and services to support detailed catchment assessment, flood modeling, and review of flood mitigation & drainage design options.

KENYIR DAM BREAK STUDY 2008

TENAGA NATIONAL BERHAD (TNB)

RESEARCH

Provision of advanced integrated satellite and LiDAR‐ based airborne geospatial data solutions and services for dam break modeling, emergency response plans, and development of Dam Break Information System (DBIS).

SIBU FLOOD MITIGATION MASTER

PLAN 2008


SALIRAN (DID) SARAWAK

Provision of advanced integrated orthoimagery and LiDAR‐based airborne geospatial data solutions and services for drainage modeling, preliminary and detailed design works.

FLOOD MITIGATION & MAINTENANCE

SCHEME FOR KELANTAN 2007‐ 2008



Provision of advanced integrated satellite and LiDAR‐ based data solutions and services to support flood modeling, drainage assessment, and developing design solutions for flood mitigation across Kelantan State.




BINTULU PULP &

PAPER PLANTATION DEVELOPMENT 2008 –

2010

GRAND PERFECT STIDC

LiDAR‐based detailed terrain mapping and analysis for plantation design and management.

SG DAMANSARA STORMWATER

MANAGEMENT & DRAINAGE MASTER

PLAN 2008



Acquisition, processing, and integration of satellite, aerial (LiDAR & Orthoimagery), and field data across Klang Valley. Supporting assessment of current engineering and design problems, and then preliminary and detailed storm‐water management design and engineering solutions, including integration of 2‐D & 3‐D hydrological models and simulations, ‘tuned’ by comparison against documented flood events. Works continued with the identification and prioritization of plans for engineering repair works to existing structures, and also new storm‐ water management and retention infrastructure.

FOREST / PLANTATION ROAD DESIGN &

TERRAIN MAPPING 2008 – 2010

KTS SAMLING

LiDAR‐based detailed terrain mapping and analysis for forest and plantation road design and forest management.

SMARTER DATA FOR INTELLIGENT DESIGN SOLUTIONS’




OTHER SELECT CONSULTANCY SERVICES & PROJECT EXPERIENCE

1. Ministry of Science Technologies and Environment (MOSTE) National Wetlands Biodiversity Study: Database Development based on advanced image processing and classification to identify, delineate, and classify wetlands and other land cover classes across Malaysia, from Landsat TM (1990‐series) and Landsat ETM (2000‐series) imagery

2. BHPP Billiton Pilot Project for Oil Seep Detection & Mapping ‐ Gulf of Mexico. Successful pilot study was then deployed in different oil regions as a commercial service. Utilising remotely sensed data & advanced image processing to detect and map oil slicks on surface of the sea. Systems deployed included of Airborne Hyperspectral, DigitalGlobe, SPOT, Landsat and ASTER imagery.

3. LIDAR and Thermal Survey for TNB Transmission Deployment of helicopter‐based LiDAR, video, and thermal imaging cameras, and associated field support services to map vegetation clearance and conductor faults. Data integration into PLS‐CADD for clearance modelling.

4. Flood Mitigation Studies ‐ Proposed Flood Mitigation & Maintenance Scheme for Klang River Basin ‐ Kuching City Flood Mitigation ‐ Proposed Flood Mitigation & Maintenance Scheme for Kelantan State & Sg Golok

Mapping support services for flood mitigation study, including integrated satellite mapping and airborne survey (LiDAR and Orthoimagery), analysis and review of mitigation options, and proposed design solutions Services included the development of advanced object‐oriented algorithms for classification of high‐ resolution airborne imagery, LIDAR terrain data, DigitalGlobe / SPOT / RapidEye Satellite Imagery, and supporting 1‐D and 2‐D hydrological model development and testing.

5. Route Alignment Survey, Optimisation, Visualisation Services NACAP: Petronas Bintulu‐Kimanis Gas Pipeline (SSGP) PadangMaju Bina: Kota Bahru–Kuala Krai Road Alignment Gabungan Jurubina: Gemas–Johor Bahru Road Alignment Hikmat Asia: Subang Bypass Karachi Elevated Highway: Development of interactive 3D‐Visualisation and Simulation system for the evaluation of highway design options

6. Satellite Image Mosaic Production & Classification Services Production of Satellite Image Mosaics for Kelantan, Perlis, Penang, Johor, Malacca, Perlis, Terengganu, Selangor, and Kedah. Processing included cloud‐minimisation, pan‐sharpening, color‐ balancing, geometric correction, and mosaicing for multi‐client deployment MPOB: Image processing, mosaic basemap creation, and object‐oriented landcover classification services over Sabah for the Malaysian Palm Oil Board Perbadanan Bekalan Air (PBA): Provision of Medium and High‐Resolution Satellite Image Mosaics, with cadastral overlay for Penang Island & Seberang Prai SEA Resources Management: Project support services for tuna farm feasibility study – Analysis of AVHRR, MODIS, and SeaWIFS imagery, for Sea Surface Temperature, Chlorophyll, and Ocean Color.




Majlis Perbandaran Klang (MPK): Supply of high resolution satellite data & other derived information

products. Included landuse classification, & cadastral overlay DRB HICOM:

‐ Supply of High‐Resolution Satellite imagery and processing services for the proposed KTMB

Double‐Tracking High Speed Railway from Butterworth to Bagan Serai and Kluang to Kulai ‐ Verification of the Ground Survey Data (First Class Engineering Survey) for the Butterworth – Bagan

Serai sector. Geocorrection of digital aerial photographs over Kluang to Kulai. Integration of cadastral and ground survey data with image base map

BSMART Technology Vehicle Tracking: Supporting location awareness & vehicle tracking with satellite

base maps Malaysia Nature Society: Support services and data donated for mapping and production of the National Important Bird Area Directory and support for the Belom‐Temengor Forest Reserve Conservation Initiative

7. Bukit Antarabangsa Landslide Emergency Response Emergency response for landslide survey and analysis (TLS) / 3600 SiteSee Imagery)

8. Landslide Hazard Assessment Deployment of LIDAR and High‐Res Imaging Cameras for Landslide Hazard Assessment Studies over

Genting Highlands and Hulu Klang

9. Forest & Plantation Resource Assessment Forest and plantation resource validation and assessment projects for the Sino‐Forest assets across China, using RapidEye satellite imagery and advanced processing algorithms, on behalf of multinational investors and industry consultants. One of the largest satellite‐based private plantation assessment study yet undertaken across the region, extending over 75,000 sq k.

10. Plantation Management Services Sime Darby ‐ Precision agriculture services for oil palm plantation management Golden Hope Plantation – Pilot Project for development of the ‘Precision Agriculture Integrated Management System’ (PAIMS) program over Pulau Carey. The project involved reviewing hyperspectral data & DigitalGlobe satellite imagery, with advanced image processing & interpretation for the production of thematic and vegetation condition layers.

11. UN Carbon Reduction (REDD+) Program Satellite imagery and support services for the Guyana Forest Commission REDD+ carbon reduction and trading scheme ‐ working with industry consultants to develop and implement the world’s first whole‐of‐country REDD satellite mapping program from 2011‐2013, with ongoing annual assessments proposed with donor‐country backing.

OUR FACILITIES

OUR FACILITIES




We are pleased to show‐case our bespoke facilities at Solaris Dutamas (‘Publika’). These were designed to reflect our long‐term involvement and commitment to the Malaysian geospatial industry, and are intended to provide RS&GIS staff, and also our clients and visitors, a modern, comfortable, fully‐equipped environment for servicing business and project requirements.

Delivery of data and mapping services and solutions is

supported by investment in our IT infrastructure.

Integrated data and storage servers and workstation

computers enable fast and highly automated data

processing, LiDAR, Imagery, and GIS ‘production’ lines,

massive on‐line data storage, and rapid data transfer. Our WEBGIS hosting services support remote and distributed access to information, providing the flexibility and data consolidation / coordination essential to many projects. The development and delivery of geospatial information and intelligence, and effective knowledge‐ based solutions are our specialty, and have been proven time‐and‐again to add value, and reduce risk profile, for both your project and business requirements.

2018 corporate profile profile...a4-2 3a, solaris dutamas no. 1 jalan dutamas 1 sri hartamas, 50480...

Documents