21世纪是充满希望的时代,北京欢迎具有战略眼光的 … · web viewit has formed the...
TRANSCRIPT
2003-2004
Development and Resources--Investing in Beijing’s Industrial Sector
Projects Open to Foreign Investment
Beijing Economic CommissionBeijing Branch of China Council for Promotion
of International Trade
Preface Here is a collection of projects open to foreign investment, which
the industrial authority of Beijing made public for the first time in the year of 2003. Totaling 76 in number, they cover such fields as machine building, micro-electronic technology, automobile parts and components, bioengineering and new medicine, electronic products, electrical appliances, medical apparatus, chemicals, pharmaceutical and material transportation, and construction of industrial development areas.
Each of the projects are listed with an introduction to the planned amount of investment, intention for cooperation, and advantages and status of the enterprise concerned, as well as an analysis of the market situation, construction of the project itself, and anticipated economic benefit. This is expected to help would-be investors make final decision.
More details are available upon request. You are welcome to contact
them according to the following address.
Table on Introduction of InvestmentName Production line of helical spring, stabilizing bar, torsion bar
Sponsor Enterprise No.1 Spring Plant of Beijing Motor Industry Group
Construction Site Chang xindian, Liqiao Town, Shunyi District, Beijing
Total Investment USD7.5 millionInvestment With Fixed Assets USD7.5 million
Circulating Funds
Intentions
According to the principle of mutual benefit, the investor should have strong
economic strength, relevant experiences and techniques on the production of
suspension system, and export channels preferred.
A joint venture can be set up with 80% foreign shares and 20% domestic shares both
in form of cash or equipment; or a cooperation company can be established in the
form of technological cooperation.
Potentials for
Development
At present, Beijing Modern Automobile Production Project has been put into
production approved by the state. However, its suspension system is a blank of
motor industry in Beijing. With the development of automobile industry in China,
this project has a promising market perspective.
This enterprise is a subsidiary special spring production plant of Beijing Motor
Group, and has strong technological bases. At present, the plant covers an area of
80000m2, and 20000m2 is for this project. The workshop is around 6000m2. The
water supply ability in the plant is 40m3/h, and a water recycle facility has been
established and can reach the environment protection requirements.
Product Title
Newly
Increased
Output Volume
Functions
1 Helical spring 100 000 000
With a simple structure and high specific
energy capacity, it is a common kind of
spring component among the modern
suspension systems, which is helpful to
enhance the operational stability, and
absorb the shocks.
2 Stabilizing bar 600 000
It is broadly used in automobiles to
remedy the deficiency of rigidity of the
suspension so as to guarantee the
horizontal stability.
3 Torsion bar 400 000 It has greater power stored in unit weight
with less mass and good arrangement, It
can save spring steel materials, decrease
the weight of the non-hanging section,
and help to enhance the smoothness of
driving and is convenient in maintenance.
It can be broadly used on off-road
vehicles and automobiles.
Market
At present, the output of cars has increased year by year. In the year of 2002, the car
output of our country broke through one million for the first time. The market status
of car made-in-China has been rapidly enhanced, and ranked the 6th or 7th in the
international market. It is predicted that by the year of 2003, the economic increase
rate will reach 8%, and the citizen need for cars will keep high increase trends. In the
year of 2003, the demand in private cars will continue to increase, and its portion in
the total demand will increase by 5 or 6 percentage points. Such a trend will remain
unchanged in the coming years. As the auxiliary equipments of cars, the market
demand of the automotive suspension systems will make simultaneous increase with
the high-speed increase of car consumption.
Techniques
To establish advanced automatic production lines so as to enhance the technical
level of process control, the quality of products and satisfy the increasing control
demand on products in the market.
Process of production techniques:
Laying off-Inspection-heating and molding-heat treatment-Inspection-blasting-
sorting-painting-in stock
Sections to be improved: heat treatment, inspection, blasting
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD20 million Total Annual Profit USD800,000
Annual After-Tax
ProfitUSD540,000
Introduction to
EnterpriseTotal Assets
RMB¥92.45
millionRegistered Capital
RMB¥8.37
million
Number of
Employees400
The factory was established in 1957 with first class design capability of plate spring
and is the main special production base of light motor armor plate springs with
annual production ability of 30000 tons. The factory is also a member factory of
China Automobile Association, the Agriculture Vehicle Branch of China Agriculture
Mechanism Industry Association and the backbone member of China Automobile
Armor Plate Spring Association. After a large-scale technique reform, the factory has
possessed excellent plate spring production shops and lines, and other production
equipments with national advanced industry level. The factory has also established
rigorous and scientific quality system and acquired the international quality
certificates of ISO9001 and UKAS.
Remarks
The enterprise has now complete workshops and public facilities such as power,
water, heat and sewage systems, which will guarantee successful implementation of
this project.
Tel +86 10 89427551 Contact Person Chen Xu
Table on Introduction of InvestmentName Manufacturer of export electric machinery (joint venture)
Sponsor Enterprise ITOCHU CORP (B)
Construction Site Shunyi District, Beijing
Total Investment USD1 millionInvestment With Fixed Assets USD600,000
Circulating Funds USD400,000
Intentions The intention is to introduce foreign capitals, improve production conditions and
environment, renew equipments, enlarge production scale, and increase the
production capability and technical contents in products.
A joint venture is expected to be established by cash investment from the foreign
side and equipment investment from the home side, each holds 50% of the share.
Potentials for
Development
The main products of this enterprise are mainly exported to Japan. Most of its
products are components and parts, and the rest are assembly engines. It is planned
to enhance the production scale of the enterprises through the establishment of a
joint venture, and increase the production capability and technical content so as to
realize the purpose of exporting assembly electric engines to Japan.
At present, the enterprise covers an area of 30000m2, with 8000m2 for workshop, and
22000m2 for administrative, living and auxiliary business.
Product Title
Newly
Increased
Output Volume
Functions
1 28MT engine 120 000 Japanese decelerated-style engine,with
12-24V voltage, and 3-8kw power.
The products are all exported to Japan.2 29MT engine 3600
3 Japanese electric
engine
60000
Market
The engines manufactured in this project are mainly used in automobiles. According
to the development layout of the motor industry of China, the motor industry will
become one of the supporting industries for the national economy. It is expected that
the total output of automobiles will reach 3.2 million by the year of 2005. Its
development emphasis is cars and business vehicles. The demand of all kinds of
motor dynamotors and engines increases annually and the enterprise has a great
market perspective.
It can be estimated after the actualization of this project the enterprise can have a
maintenance engine market of 50000 pieces, and an assembly market of 15000-
20000 pieces annually.
Construction
Period3-5 years
Expected
Economic Benefit
Annual Sales
IncomeUSD12 million Total Annual Profit USD600,000
Annual After-Tax
ProfitUSD400,000
Introduction to
EnterpriseTotal Assets
RMB¥51.29
millionRegistered Capital
RMB¥12.45
million
Number of 733 Number of 56
Employees Technicians
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Remarks
The enterprise has now complete workshops and public facilities such as power,
water, heat and sewage systems, which will guarantee successful implementation of
this project.
Tel +86 10 64229063 Contact Person Fu Chun
Table on Introduction of InvestmentName Joint investment project of jig-borers
Sponsor Enterprise Beijing No.1 Machine Tool Plant
Construction Site Beijing
Total Investment USD1.5 million Investment With Fixed Assets USD1 million
Circulating Funds USD0.5 million
Intentions We hope to establish a joint venture with foreign companies with advantage of
capital and technology. It is a jig-borer assembly plant, producing assembled
precisely numerical controlled jig-borers in a small quantity and satisfying the
demands for finishing in machine processing. The foreign company is supposed to
be a manufacturer of jig-borers with design capacity and technology.
The foreign company can have a share of 49% of the joint venture by bringing in
cashes and technology.
Enterprise
Potentials for
Development
Beijing No.1 Machine Tool Plant is a large machine tools production enterprise with
a history of more than 50 years. Due to market basis and good brand advantage, its
products are well-known and gain a certain market share. According to its own
condition, it begins to remove to Linhe Development District and is ready to build a
modern machine tools production base there that produces advanced numerical
controlled machine tools and machining centers. In the meantime, it plans to
cooperate with several foreign manufacturers of machine tools separately in order to
further develop the enterprise.
The jig-borers project is of great significance to the assurance of mechanical quality
and it can realize the final assurance of work precision. The demand of this kind of
machine tools is limited but they are absolutely necessary. Especially when there are
less high precise machine tools, the products are very promising in the market and
the enterprise has the capacity of producing the kind of machine tools.
Product Title
Newly
Increased
Output Volume
Functions
1 YBM-800N 15 The machine tool can be controlled
numerically and manually and can realize
high vacancy precision and high
geometric precision.
2 YBN-55J 15
Market There is a lack of machine tools able to control final finishing in the market.
Techniques
The project is only restricted to the assembly procedure and Beiyi Company can be
consigned to the processing of all the parts needed in the project. Therefore, we
focus on the assembly of the precise key parts of precise machine tools and the
control on the whole. It is supposed to provide the “final cutting” of finishing of the
precise parts.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD1.635 million Total Annual Profit USD130,800
Introduction to
EnterpriseTotal Assets
RMB¥1039
millionRegistered Capital
RMB¥87.37
million
Number of
Employees
2238 Number of
Technicians
354
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1980s
During 50 years’ construction, Beijing No.1 Machine Tool Plant has being
developing and now been one of the largest machine tools manufacturer in China
and also the largest manufacturer of millers. It has designed over 100,000 small and
medium size, heavy and super heavy machine tools of more than 500 kinds. ‘Beiyi’
products are popular all over the country and over 50 countries and districts in the
world.
It owns the flexible manufacturing workshop, the vertical storage, the computer
network and large quantities of hot and cold processing devices and check measure
instruments. Apart from its capacity of manufacturing machine tools, it also can
develop and turn out in mass production all kinds of popular and top grade numerical
controlled machine tools and machining centers. In 2002, the sales volume of
machine tools amounted to 250 million RMB.
It also carries out effective research in the field of computer integrated
manufacturing technology and remarkable achievements have been made in the
CIMS project. The product development cycle shortens by half and 5 to 8 kinds of
products are launched into the market each year. It has been confirmed by the
national 863/CIMS theme experts as one of the three key state appliance factories. In
1995, it is identified as one of the first 100 state ‘technology centers’.
At present, it is undergoing removal and transformation and tries to become one of
the largest modern manufacturers of machine tools in the country.
RemarksThe enterprise can assure smooth operation of the project, providing workshops,
public facilities such as water supply, power supply, heating and so on.
Tel +86 10 65682124 Contact Person Liu Yonglu
Table on Introduction of Investment
NameJoint investment project of numerical controlled cylindrical grinding machine and
machining center
Sponsor Enterprise Beijing No.2 Machine Tool Works
Construction Site 4 LugouqiaoNanli, Fengtai, Beijing
Total Investment USD8 million Investment With Fixed Assets USD4.23 million
Circulating Funds USD3.77 million
IntentionsWe hope to establish a joint venture together with foreign companies with capital
and technology advantage; The foreign company can have the share of 50% in the
joint venture by bringing in capital and technology. We hope that the foreign
investment in cash at least reaches more than 10% of the registered capital; provide
2-4 serials of product technology (including product blueprints, technical skills,
frocks and so on).
Sales channels: the internal company sells through the sales network of the joint
venture and the foreign company is responsible for the sales in the foreign market;
Objective market: medium level products in the internal market and top grade
products in the international market with partial product buy-back.
Enterprise Potentials
for Development
China is becoming a market- orentied country. After China’s entry into WTO and
further opening of market, market in China has become a large international market.
70-80% of the world 500 top enterprises have invested and built factories in China or
set up branches and research and development department and they have transferred
their manufacture base to China. Therefore, China will become the new international
manufacture base. Beijing puts forward recently developing vigorously modern
manufacture and it will strengthen the development of car manufacture, numerical
machine and other industries. In October, the new policy will be issued to encourage
the development of manufacture. Hyundai has established a joint venture in Beijing
and plans to produce 300,000 cars each year. Beijing will supply kit manufacture for
the car industry, which provides better local market for numerical controlled
cylindrical grinding machine and machining center.
The enterprise specializes in this kind of product and has the production
experience of numerical controlled cylindrical grinding machine and machining
center.
Product Title
Newly
Increased
Output Volume
Functions
1
GL5A(P) NC
cylindrical grinding
machine
60 sets
The product has reached the
advanced international level of
medium size of numerical controlled
cylindrical grinding machine of the
late 1990s. Introduction of
manufacture technology of Fenggong
precise machining center and
production of small size precision
vertical machining center through
cooperation with it.
2 PV4-C machining center 60 sets
3
Other special machines,
general machines and
numerical controlled
cylindrical grinding
machines
Market The product to be manufactured is mainly used for mass production of parts of
motorcycles, gear box and household electricity. It is also applicable for finishing of
small size boxes and valve parts, which need high precision.
It is estimated that the demands in the machining center market of China will be
4,000 by 2005. Among the needed kinds of machining center, vertical machining
center of axis Y travel within 500 mm, high-speed machining center with a principal
axis with a rotate rate of more than 10,000/m, vertical and horizontal automatic
switching machining center, precise vertical machining center, and the five-
coordinate machining center will be needed in large quantities in the market. It is
estimated that market share of the domestic machining center will exceed 60%.
Techniques
PV4-C high-speed vertical machining center: it uses interior electric principal axis
and the rotation speed of its principal axis can reach 10,000 circles/ min, with high
slewing precision and strong rigidity. It uses high-speed special ATC structure with
the tool change time of 1.5 sec (tool-tool). With excellent cutting, cutting efficiency
reaches 1,596 cm/min when cutting aluminum alloy (A20N) material. Highly precise
locating: precise locating: ±2.0um/ full length and precise relocating; good
maintenance of ±1.0um. Absolute encoders are used to all servomotors, thus
decreasing the number of travel switches and receiving switches in a large margin
and improving reliability. It has a simple appearance with a totally closed hood. It
uses the imported original numerical control system with simple and easy
programming and operation. The small sized precise vertical machining center is
especially suitable for finishing of small boxes and valve parts that require high
precision.
CL5A(P)-II the numerical controlled cylindrical grinding machine and numerical
controlled angle head cylindrical grinding machine: they have the structure of electro
mechanic integration with strong rigidity, easy installment and good whole
protection; the grinding head is imported with original packaging and TOYODA
STAT static and dynamic axis of high rigidity is used for the grinding wheel spindle
with high slewing precision, rigidity and long life; the linear velocity grinding wheel
can be 45m/s(the common grinding wheel and constant linear velocity) and
80m/s(CBN grinding wheel); the numerical control specially designed for CNC
grinding machine,two axis of universal driving (X and Z), the minimum setup unit
of 0.1um, highest feed rate of 20m/min; when cutting the taper in batches, fit
precision can reach 80%; imported and homemade principal momentum measure
instrument, grinding wheel automatic balancing device and lost motion eliminating
device can be adapted.
Construction period 3 years
Expected Economic
Benefit
Annual Sales
IncomeUSD18 million Total Annual Profit USD3.63million
Annual After-Tax USD1 million
Profit
Introduction to
Enterprise
Total AssetsRMB¥304.93mil
lionRegistered Capital RMB¥50 million
Number of
Employees1202
Number of
Technicians151
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1980s
Beijing No.2 Machine Tool Works is a large national key enterprise, mainly
manufacturing precise and highly efficient cylindrical grinding machine and
numerical controlled cylindrical grinding machine and at the same time producing
machining centers, super finisher, machines specially designed for car manufacture
and so on. It is one of the eight big automobile manufactories and assembly plants
selected by the Ministry of Machine and Industry of the state during the Ninth Five-
Year Plan. In the past forty years, its products have been taking the leading role in
the industry thanks to relying on scientific and technical progress and following the
advanced international trend.
Beijing No.2 Machine Tool Works owns a numerical control precise machine
research center, which has provided several serials of products such as grinders,
machining centers, machines specially designed for car manufacture and super
finishers during many years of experience of design, search and manufacture. Since
China’s adoption of Opening and reform policy, Beijing No.2 Machine Tool Works
has made great progress in the manufacture level by keeping improving technology,
realizing management of modern enterprises and applying the advanced production
method. Having passed the ISO9000 Quality Certification and won many prizes, its
products are praised as the “the recognized famous brand product in China” and
spread all though China and to more than 30 countries and districts in the world.
RemarksThe enterprise can assure smooth operation of the project, providing workshops,
public facilities such as water supply, power supply, heating and so on.
Tel +86 10 83219661 Contact Person Cui Zhicheng
Table on Introduction of InvestmentName ATM automatic output and storage boxes of paper money
Sponsor Enterprise Beijing Institute of Opto-electronic Technology
Construction Site Industrial Development District of Miyun County
Total Investment USD0.9 millionInvestment With Fixed Assets USD0.50 million
Circulating Funds USD0.4 million
Intentions
We hope to form a joint venture together with the foreign company with capital and
technology advantages in order to establish the industrial entity. The foreign
company is supposed to have several years’ experience of paper money receiver
production.
The foreign company can bring in cashes or equipment and technology with
equipment accounting for 20% of the total share or technology accounting for 80%
of the total.
Enterprise
Potentials for
Development
Since 1994, RMB recognizer research department of Beijing Institute of Opto-
electronic Technology has been undertaking the development of RMB recognition
and authentication and RMB recognizers. It is the first to launch the business RMB
paper money receiver and coin receivers. Now many kinds of paper money receivers
and coin receivers for automatic vending machine are developed, which can
recognize and receive new and old editions of paper money and coins respectively.
Those that are being made in mass production include YBJ-1coin receivers and
ZBS-1paper money receivers.
Product Title
Newly
Increased
Output Volume
Functions
1 The five-box
automatic output
and storage boxes
300 sets
The most advanced internal machine
processing technology and die
manufacture technology are applied.
According to the international ATM
manufacture standard, the products of
international level are turned out and
2 The three-box
automatic output
and storage boxes
200 sets
replace all the automatic output and
storage boxes imported.
Market
In the recent years, all major banks have actively bought a lot of ATM and offered
self-served depositing and withdrawal business in order to expand their business and
improve their service. As for the paper money output and storage boxes installed in
over 2,000 ATM in Beijing, the purchasing price has exceeded 400 million RMB.
However, the demands for ATM in the internal market are far from saturation.
Therefore, it is profitable to develop homemade ATM paper money output and
storage boxes.
As for the current internal market of ATM, the paper money output and storage
boxes are all imported. We plan to introduce the foreign production technology of
top grade paper money output and storage boxes of ATM and provide the high-
quality and cheap homemade top grade paper money output and storage boxes for
the internal ATM manufacturers by coordination with the RMB identifying
technology mastered by the enterprises.
Techniques
1. Absorption of international advanced experience of production and management
and realization of the quality guarantee system of the whole production process.
2. Selection of advanced DSP technology and algorithm theory.
3. Use of highly precise and highly stable photoelectric sensing elements and
magnetic sensing elements.
4. Use of the most advanced design conception of paper going channel transfer and
assurance of smooth and quick transfer of all kinds of paper money to and out of the
money box.
5. Being applicable to all paper money more than one yuan.
Construction
PeriodHalf year to 1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD3.4 million Total Annual Profit USD1.02 million
Annual After-Tax
ProfitUSD0.68 million
Introduction to
EnterpriseTotal Assets
RMB¥57.12
million Registered Capital
RMB¥10.78
million
Number of
Employees216
Number of
Technicians113
Level of
TechnologyWorld level
Technological
Level of
Equipment
1990s
As of the key research centers in Beijing, Beijing Institute of Opto-electronic
Technology is the research center of the laser industry of the State Machine and
Industry Bureau and is also the internal technology center of ‘Optic radiation safety
and laser devices’ of the International Electrotechnical Commission (IEC)TC76. It is
approved by the Beijing Science and Technology Commission as ‘the pilot base of
laser medical equipment in Beijing’ and owns ‘the laser exploration and examination
lad’ constructed under the approval of Beijing Science Fund Commission. In 1998, it
was approved by the State Bureau of Medical Administration as ‘the research center
of laser medical equipment project’. The laser parameter measure department of
Beijing Institute of Opto-electronic Technology is approved by the State Science and
Technology Commission as ‘the measure center of laser parameters in Beijing’; it
also becomes ‘the product quality supervision and check center of laser equipment of
the Ministry of Machinary Industry. The products of researches of laser equipment,
laser technology appliance and photoelectric technology appliance in the center have
won more than 100 prizes from the state, the ministry and the municipal
government.
The center occupies an area of 5,030 m2 with a construction area of 8,660 m2. Its
Daxing production base has a construction area of 3,000 m2. Its Miyun production
base occupies an area of 10,000 m2 with a construction area of 6,000 m2. The center
consists of several laser technology appliance research departments and the RMB
recognizer department that has been undertaking development of RMB recognition
and authentication and RMB recognizers and is the first to launch business RMB
paper money receivers and coin receivers. At the same time, the center also has
machine processing workshop and optic processing workshop. Its products are
popular all over China and are exported to the international market.
RemarksIt can assure smooth operation of the project with workshops and good public
facilities such as water supply, power supply and heating, etc.
Tel +86 10 84024547 Contact Person Guo Shaoling, Cai Mindong
Table on Introduction of InvestmentName Public Multimedia Self-help Service Equipment (Kiosk Touch Integration)
Sponsor Enterprise Beijing Shougang Ring-Star Touch Computer Co. Ltd.
Construction Site Beijing Zhongguancun Science Development Area
Total Investment USD20 millionInvestment With Fixed Assets USD12 million
Circulating Funds USD8 million
Intentions
Hope to introduce foreign advanced economic management system through
international cooperation to help to the open-up of the market share of the item in the
world
Overseas investor can make the investment in cash to establish joint venture
corporation, the foreign partner occupying 49%.
Enterprise
Potentials for
Development
The Shougang Ring-Star Touch Computer Co. Ltd. owns world leading touch
technology, imbedding systematic technology, touch browsing technology, offering
touch products, network computer products, varied special network information
terminals, key applications, and network management software. It is the general
agent in Chinese region of the touch products for American ELO corporation and
Japanese MINATO company, and acts meanwhile for Lantech network products,
Phillip display products and MINATO programmer devices.
The company has outstanding experts and abundant customer resources. With many
years of experience it has opened up seven series products and the PMSS system
scheme, leading the same sectors.
Product TitleNewly Increased
Output VolumeFunctions
1 E series 5000 sets By means of next generation
communication net (NGN), integrate the
language, data, video communication
technology, and human-PC interactive
interface, with bankcard and IC card as
payment medium.
2 X series 10000 sets
3 N series 20000 sets
4 G series 2000 sets
5 Pmss 300 sets
Market Public multimedia self-service equipment (touch integrative machine) is multimedia
interactive equipment developed according to the market requirement. It integrates
the advanced touch computer technology and modern manufacturing process into an
organic whole, with characteristics of graceful appearances and rational structure. Its
varied and luxurious interface is very pleasing.
Public multimedia self-service equipment is indeed a drive to the development of
urban high-tech industry and contribution to the network construction and image
establishment of the bank. It will bring out a brilliant and convenient digital life and
lead people into a real internet time.
Techniques
KIOSK industry is a complex system, whose production process involved with the
technology and arts of many fields and layers as follows:
1) Industrial manufacture: Industrial design, plate work and grinding tools and
surface treatment;
2) Electronic technology: Computer, control system, power supply, human-
computer interaction equipment and peripheral equipment;
3) Multimedia communication: New generation communication network (NGN)
technology as concerns language, data and video.
4) Web Service technology: Human-computer interface, internet, web
management, and security.
Construction
PeriodWithin 12 months following the approval of feasibility study reports.
Expected
Economic Benefit
Annual Sales
IncomeUSD50 million Total Annual Profit
USD29.41
million
Annual After-Tax
ProfitUSD5 million
Introduction to
EnterpriseTotal Assets RMB¥90 million Registered Capital
RMB¥76.175
million
Number of
Employees130
Number of
Technicians70
Level of
Technology1990s
Technological
Level of
Equipment
1990s
The Shougang RingStar Touch Computer Co. Ltd. (SGS) is a new technology stock-
holding system enterprise registered at Zhongguancun Science Park. It owns world
leading touch technology, imbedding systematic technology, touch browsing
technology, offering such as touch products, network computer products, varied
special network information terminals, key applications, and network management
software. It is the general agent in Chinese region of the touch products for
American ELO corporation and Japanese MINATO company, and acts meanwhile
for Lantech network products, Phillip display products and MINATO programmer
devices
The company has designed and made the first Chinese touch information inquiring
integrative machine (Kiosk), started the touch PC industry. It boasts the domestic
largest base for research, development and production of the touch products, being
designated as enactment unit of the sector standard of information industry by the
Ministry of National Information Industry, and responsible for establishing national
standard of the KIOSK touch inquiry integrative machine.
The company, on the base of KIOSK touch surfing integrative machine, WBT
network PC, various kinds of special web information terminals, key applications,
web management software, works out the solutions for urban public information, e-
business, finance, business management, e-government, hospital, and supplies the
network system, net products and service suitable to such sectors as government,
education, public undertakings.
The company boasts excellent technical talents, sound market channels and good
enterprise reputations, and its sales network spread all over China. It has passed the
ISO9001: 2000 quality authentication.
The company occupies area of 18,000 m2, of which 2,000 m2 are factory buildings
and1, 000 m2 are office and logistics premises.
Remarks
The enterprise has now complete workshops and public facilities such as power,
water, heat and sewage systems, which will guarantee successful implementation of
this project.
Tel +86 10 62006688-6002 Contact Person Li Feng
Table on Introduction of InvestmentName Automation of Heating ventilation (performers and devices)
Sponsor Enterprise Beijing Jingyi Century Automatic Equipment Co.,Ltd.
Construction Site No.2 Weizikeng, Songjiazhuang, Yongwai, Fengtai District, Beijing
Total Investment USD6 millionInvestment With Fixed Assets USD2 million
Circulating Funds USD4 million
Intentions To invest to organize a liability limited company specializing in production of tunnel
ventilation performers, building mufflers, heating ventilation air-valve performers,
tunnel-pathway barriers, electric automation system performers, aptitude electric
performers, and whole set automation apparatus series products. The qualification of
the foreign partners: (1) Having interests in investment to the items of heating
flowing whole set automation. And taking Beijing as the base for business activities.
(2) Being a business corporation entity with abundant financing. (3) Having interests
and ability to further invest when achieving good economic returns.
Enterprise
Potentials for
Development
The rapid development of the subway, highway, large-scale buildings, power plants,
factory buildings provides the brilliant and vast market prospects.
Product Title
Newly
Increased
Output Volume
Functions
1 subway air-valve 2000sets/units
Air-valves and performers and mufflers
are all self-introduced by this plant, their
technical performances being the best in
China as export-oriented products.
2 Air-valves for
buildings20000sets/units
3 mufflers 10000sets/units
4 Electric performers 10000sets/units
5 Whole-set
automation devices20sets
Market
Air-valves, performers, and mufflers are basic devices used in the ventilation
system. The air valves are used to auto-control the air output and ventilation. The
performers are used for accepting the control signals from the adjusters in the auto-
control system and changing the operation variables. The mufflers are effective
devices to prevent the noises resulted from air momentum from spreading. Setting in
the air input-output system, the muffler is part of piping system, by which acoustic
treatment is done in the pipe to reduce the production and spreading of noises
without influence on the air flow, the noise elimination at the inlet or outlet being
10~40dB(A), decreased by 50%~93%.
The rapid development of national economic construction results in the fast
increase demands of large-scale public and/or civilian buildings, industrial buildings,
and undergrounds and tunnels, all of which need the ventilation systems. Hence the
vast space for marketing the item, annual marketing values expected to be more than
3 billion yuan. There are 20 factories to compete with the firms at home and abroad.
Techniques
Air- valve performer technology is introduced from American Johnson with its
advanced techniques leading the world.
The mechanic technology of the performers’ inside is the NN patent of domestic
advanced level, introduced by this plant.
Performers’ control technology is reaching domestic advanced level.
Production equipment is made in Japan with its ISO9000 quality system certified
first batch in China.
With its existing sales network and technical team, the item has been on the list of
the national key technical innovation projects
Construction
Period The project is put into operation in the same year to the investment.
Expected
Economic Benefit
Annual Sales
IncomeRMB¥20 million Total Annual Profit RMB¥4 million
Annual After-Tax
ProfitRMB¥2 million
Introduction to
Enterprise
Total AssetsRMB¥140
millionRegistered Capital
RMB¥27.47
million
Number of
Employees476
Number of
Technicians120
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Beijing Instrument Machine Tool Works, establish in 1956, under the control of
Beijing Jingyi Holding Co. Ltd., is the export base sanctified by Electromechanical
Products Export Office of State Council and China Economic and Trade Council.
Owning the self-support right of export and import and certified by the ISO9001
Quality System in 1995.
Located on the Third Ring Road in the Southeast of Beijing and holding the
convenient traffic condition, the plant occupies an area of 10,000㎡ and has
powerful capability to design and make the precision machinery and abundant ability
to develop the electric control techniques. It contains ten design offices including the
plant technical center. With wide band LAN equipped, it has established long term
cooperation of Production-learning-research with famous domestic engineering
academies. It also takes the national key technical innovation projects united with
China Academy of Sciences.
Remarks
The enterprise has now complete workshops and public facilities such as power,
water, heat and sewage systems, which will guarantee successful implementation of
this project.
Tel+86 10 67627286
13701019340Contact Person Li Runyuan
Table on Introduction of InvestmentName Electronic Material Equipment
Sponsor Enterprise Beijing Jingyi Century Automatic Equipment Co.,Ltd.
Construction Site No.2 Weizikeng, Songjiazhuang, Yongwai, Fengtai District, Beijing
Total Investment USD6 millionInvestment With Fixed Assets USD2 million
Circulating Funds USD4 million
Intentions
To invest to organize a series materials equipment liability limited company with
integrated photo- electro- mechanic technology mainly to design, assemble, and
produce the semiconductor material equipment, laser material equipment and oxide
material equipment. Qualification of foreign partners: (1) Having interests in the
investment to electronic material equipment item and taking Beijing as the base for
business activities. (2) Being a business corporation entity with abundant financing.
(3) Having interests and ability to further invest when achieving good economic
returns.
Enterprise
Potentials for
Development
The project is the upper basic industry item in the information industry. With the
rapid development of information industry, the project boasts extremely good
prospects. The firm’s advantageous conditions: (1) Leading the world level is the
industrialization of the permanent magnet equivalent microgravity crystal growing
technology. (2) Among the advanced levels are the IPC industrial control computer
and its supporting software. (3) The plant is among the first batch certified by the
ISO9000 quality system, its products being of superior quality in China. (4) the
readiness of its sales network and technical team
Product Title Newly Increased Functions
Output Volume
1 Silicon single-crystal
furnace20 sets
Permanent magnetic silicon and
gallium arsenide single-crystal
furnaces are initiated at home and
abroad, being listed on the national
key technical innovation project plan.
It has formed the series products of
silicon, gallium arsenide, and oxide.
2 Silicon single-crystal
furnace20sets
3 Gallium arsenide
furnace10sets
4 Oxidation furnace 100sets
5 Supporting equipment 200sets
Market
Semiconductor silicon material and gallium arsenide play the important role in
the defense and military industry, the high tech research and the civilian industry, as
the foremost basis materials for making micro-electronic and photo-electronic
devices, and the choice materials used for making high-speed, high-frequency and
high-power microwave devices and ultra speed integrated circuits; and lamination,
optical maser and solar battery.
The mono-crystalline silicon units of big diameter, high purity and fine
homogeneity have extremely wide usage in radio and electronic industry.
Developing the integrate circuits into the ultra scale integrated circuit, it helps the
electronic product microminiaturize and lowers the cost. gallium arsenide is the most
important and most matured compound semiconductor materials, widely used in the
photo-electronic and micro-electronic fields. The annual world production of the
mono-crystalline gallium arsenide exceeds 200 tons and the crystalloid gallium
arsenide growing technology of China has been on the world-leading list.
Information industry is the new growth point of the national economy. In the tenth
five-year period, information industry will develop at the speed three times the
national economy and be the largest industry by leading varied industries of the
national economy. The annual domestic market requirement for the product of this
project is around RMB¥500 million and the foreign market is very wide. There are
no more than 10 rival manufacturers of the same trade home and abroad, the
development potential is considerable.
Techniques
The project takes the three investments for design, pilot scale experiment and final
assembly as the key points, machining work being completed by the machine tools
plant and machinery factory of the general plant.
Construction
PeriodThe project is put into operation in the same year to the investment.
Expected
Economic Benefit
Annual Sales
IncomeRMB¥20 million Total Annual Profit RMB¥4 million
Annual After-Tax
ProfitRMB¥2 million
Introduction to
Enterprise
Total AssetsRMB¥580
millionRegistered Capital
RMB¥380
million
Number of
Employees975
Number of
Technicians329
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Beijing Instrument Machine Tool Works, established in 1956, under the control of
Beijing Jingyi Holding Co. Ltd., is the export base sanctified by Electromechanical
Products Export Office of State Council and China Economic and Trade Council.
Owning the self-support right of export and import and certified by the ISO9001
Quality System in 1995.
Located on the Third Ring Road in the Southeast of Beijing and holding the
convenient traffic condition, the Plant occupies an area of 10,000 ㎡ and has
powerful capability to design and make the precision machinery and abundant ability
to develop the electric control techniques. It contains ten design offices including the
plant technical center. With wide band LAN equipped, it has established long term
cooperation of Production-learning-research with famous domestic engineering
academies. It also takes the national key technical innovation projects united with
China Academy of Sciences.
Remarks
The enterprise has now complete workshops and public facilities such as power,
water, heat and sewage systems, which will guarantee successful implementation of
this project.
Tel+86 10 67627286
13701019340Contact Person Li Runyuan
Table on Introduction of InvestmentName Joint investment and cooperation project of encapsulation IGBT
Sponsor Enterprise Beijing Jingyi Chunshu Rectifier Co.,Ltd.
Construction Site Daxing Hi-tech Industrial Zone, Beijing
Total Investment USD4 million Investment With Fixed Assets USD3.50 million
Circulating Funds USD0.5 million
Intentions
1. All kinds of joint investment and cooperation are welcome with land,
workshops and cashes brought in.
2. By taking advantage of Beiyi Group, the sale network will be established to
exploit the domestic and international markets with no restriction on
share proportion.
Enterprise
Potentials for
Development
1. As the first professional factory to produce electric power
semiconductor parts and equipment in China, Beijing Chunshu
Rectifier Plant is the key enterprise of Ministry of Machinery and
Electronic Industry and the electric power and electronic industry in
Beijing, with high quality technical equipment, sound infrastructure
and excellent industrialization condition.
2. It has gained good reputation in the market and been well-known in
China.
3. It owns a complete sales network.
Product Title Sales Volume Functions
IGBT 60,000 Easy activation, high pressurization, large
current and favorable frequency features.
Market At present, the use of IGBT is much wider than that of IGCT, especially in the
range of small power and IGBT has replaced the traditional power device. However,
there is no plant able to produce IGBT in China till now and all are imported to the
internal market.
IGBT, the core device in electric power and electronics, are used widely and the
demands in the internal market are about 100,000 with a huge market space.
TechniquesBy using the advanced automatic packing, the computerized check technology has
attained the international level of the late 1990s.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD5 million Total Annual Profit USD1.2 million
Introduction to
Enterprise
Total Assets RMB¥90 million Registered Capital RMB¥42 million
Number of
Employees370
Number of
Technicians120
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Founded in 1960, Beijing Chunshu Rectifier Plant is the first professional factory to
produce electric power semiconductor parts and equipment in China and it is the key
enterprise of Ministry of Machinery and Electronic Industry and Beijing Electric
Power and Electronic Industry. It occupies an area of 35,000 square meters with a
construction area of 37,500 square meters. It is the manufacturer with the most kinds
of products and the most kinds of product sizes among the converter industry in
China.
Remarks
It now owns workshops and perfect public facilities, such as power supply, water
supply, heating and sewage disposal and can ensure the smooth operation of the
project.
Tel +86 10 66055231-8205 Contact Person Jin Jijun
Table on Introduction of InvestmentName Amorphous silicon solar power board
Sponsor
EnterpriseBeijing Beiyi Chuangxin Vacuum Technology Ltd.
Construction Site Yizhuang Industrial Development Area, Beijing
Total Investment USD 28 million Investment With Fixed Assets USD4 million
Circulating Funds USD4 million
Intentions
Joint investment with 30% by the Chinese party and 70% by the foreign party. The
foreign party should have technologies of amorphous silicon solar photoelectronic
products, be able to provide or purchase advanced manufacturing equipment and be
rich in management experience and proficient in sales in the international market.
Enterprise
Potentials for
Development
There are only one or two manufacturers of amorphous silicon solar photoelectronic
products in China and several tens in the world. With low manufacture cost, the
products can be soon put to civil use, promising a bright future in the market. Beijing
Beiyi Chuangxin Vacuum Technology Company is a hi-tech intensive enterprise and
one of the 100 Enterprises with Leading Technologies in Beijing. With strengths in
technologies, complete techniques and testing measures, the Company has been
adjusting product structure and increasing input in technologies, resulting in favorable
achievements in new product development, technical promotion and hi-tech
application.
Product Title Functions
1 Solar power boardLow manufacture cost per unit. Photoelectric conversion
efficiency as high as 8%.
Market At present amorphous silicon solar cell has been greatly successful both in
academic studies and in industrial production. The total output capacity of the whole
world exceeds 50 megawatts. The biggest production line produces 10 MW
components annually. With the world’s requirements for environmental protection,
both developed and developing countries are attaching more importance to the
utilization of solar energy and the demands in the market keep growing. It can be
forecast that in 2010 there will be demands of 630 MW solar photoelectronic products
in the world market. Amorphous silicon solar power board has much space for
development.
Techniques
Amorphous silicon solar cell is the best product popularized for civil use among the
various kinds of solar cells. With low manufacture cost per unit, mature manufacture
techniques and complete automatic production lines, production is made easier and
more integrated. The photoelectric conversion rate can go as high as 8%.
Construction
Period2 years
Expected
Economic Benefit
Annual Sales
IncomeUSD42 million Total Annual Profit RMB¥
Annual After-Tax
ProfitRMB¥
Introduction to
Enterprise
Total AssetsRMB¥64.68
million Registered Capital
RMB¥64.68
million
Number of
Employees500
Number of
Technicians60
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Founded in 1954, Beijing Beiyi Chuangxin Vacuum Technology company is one of the
backbone factories in China’s vacuum equipment industry. Its major products include
low-vacuum, high-vacuum and ultrahigh-vacuum acquisition equipment, vacuum
application equipment, vacuum measuring and membrane thickness monitoring
instruments and large vacuum projects, totaling more than 30 series and 160 kinds. In
1998 the Company gained the ISO 9001-1994 certificate.
Remarks
The enterprise has now complete workshops and public facilities such as power, water,
heat and sewage systems, which will guarantee successful implementation of this
project.
Tel+86 10 65813719
+86 10 65815028Contact Person Zhang Huiran, Hao Gang
Table on Introduction of InvestmentName Integrated project of inductive heating power supply
Sponsor
Enterprise
Beijing Jingyi Chunshu Rectifier Co.,Ltd.
Construction Site Sanqingdi, Shijingshan District, Beijing
Total Investment USD2.5 million Investment With Fixed Assets USD2 million
Circulating Funds USD0.5 million
Intentions
1.All kinds of joint ventures and cooperation are welcome with lands, workshops and
cashes brought in.
2.By making use of the advantage of Beiyi Group, the sale network will be established
to exploit the domestic and international markets with no restriction on share
proportion.
Enterprise
Potentials for
Development
1.The first professional factory to produce electric power semiconductor parts and
equipment in China, it is the key enterprise of Ministry of Machinery and Electronic
Industry and Beijing Electric Power and Electronic Industry, with high quality
technical equipment, perfect infrastructure and excellent industrialization condition.
2.It has gained good reputation in the market and been well-known in China.
3.It owns a nice sales network.
4.Achieving automation of timely controllable materials, such as, quenching of all kind
of dies and knives and melting of metal that is difficult to melt, it is the power supply
device of great potential.
Product Title Sales Volume Functions
Inductive heating
power supply700 sets
The equipment can melt, diathermize,
quench and sinter metal materials. It is easy
to be controlled automatically, decreasing
pollution and saving sources.
Market At present, there is not a single manufacturer of inductive heating power supply
both with high level and large production scale to the north of the Yangtze River. At the
same time, with increase of demands for deep processing of metal materials, the use of
inductive heating power supply will rise rapidly.
TechniquesIt owns full packing and checkout product line and has reached the international
advanced level of the 1990s.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD14 million Total Annual Profit USD3.5 million
Annual After-Tax
Profit USD2.4 million
Introduction to
Enterprise
Total Assets RMB¥90 million Registered Capital RMB¥42 million
Number of
Employees370
Number of
Technicians120
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Founded in 1960, Beijing Chunshu Rectifier Plant is the first professional factory to
produce electric power semiconductor parts and equipment in China and it is the key
enterprise of Ministry of Machinery and Electronic Industry and the electric power and
electronic industry in Beijing. It occupies an area of 35,000 square meters with a
construction area of 37,500 square meters. It is the manufacturer with the most kinds
of products and the most kinds of product sizes among the converter industry in China.
Remarks
It now owns workshops and perfect public facilities, such as power supply, water
supply, heating and sewage disposal and can ensure the smooth operation of the
project.
Tel +86 10 66055231-8265 Contact Person Zhao Changzheng
Table on Introduction of InvestmentName Full automatic optoelectronic beam evaporation coating machine
Sponsor Enterprise Beijing Beiyi Chuangxin Vacuum Technology Ltd.
Construction Site Daxing Industrial Development Area, Beijing
Total Investment USD4 million Investment With Fixed Assets USD2.4 million
Circulating Funds USD1.6 million
Intentions
Full automatic Opto-electronic beam evaporation coating machine is the key project of
development defined during the ‘tenth five-year plan’ of Beiyi Company, which hopes
to cooperates with foreign companies of advanced vacuum equipment manufacture and
development techniques and technical skills in a form of joint ventures with a
investment share of 50% each.
Enterprise
Potentials for
Development
As the earliest manufacturer of vacuum equipment in China, Beijing Beiyi Chuangxin
Vacuum Technology Ltd. exports its production to Germany, North Korea, Vietnam,
Pakistan and other countries and gain a good reputation from the inside and outside
customers and in this industry. At present, the company employs a professional
technology team of relative advantage in China and owns advanced groups of
numerical control and display machines and excellent measure. It takes the lead in
passing the ISO-9001 Quality Guarantee System and has been playing the leading role
in this industry.
Product Title
Newly
Increased
Output Volume
Functions
1Full Automatic
Coating Machine60 sets
Full automatic optic coating machine is the
top grade product with good technical skills,
technology and repeating stability. It can
satisfy the production needs of high tech
photoelectric products.
Market In China, the vacuum equipment is mainly coating machine and most of the
products are of medium or low level of technique. From 1995 to 1999, the production
of coating machine in China increased by 184% and the average growth rate during the
four years amounted to 46% which is far higher than the growth rate of other vacuum
equipment. The total value of demand for vacuum equipment was about 3 billion RMB
in China and the interior manufacturers only had the market share of around 30%. It is
estimated that the demand for vacuum equipment will double in China in 2005 with a
value of over 10 billion RMB. Full Automatic Optoelectronic Beam Evaporation
Coating machine is the top grade product, which is applicable in optical fiber,
optoelectronic and optic coating product processing. None of the manufacturers in
China can supply such products till now and all the machines needed are imported.
Therefore, this is a project with good business opportunities.
Techniques
Through full automation of machine control process and technical parameter control,
full Automatic Optoelectronic Beam Evaporation Coating machine reaches the
requirements of photoelectric products with high precision, high stability and high
capacity and meets the demands of photoelectric industry. Currently, it is the
international production level of vacuum equipment manufacturers and will supply a
gap in this field in China.
Construction
PeriodTo be finished within one year
Expected Economic
Benefit
Annual Sales
IncomeUSD10 million
Introduction to
Enterprise
Total AssetsRMB¥64.68
millionRegistered Capital
RMB¥64.68
million
Number of
Employees500
Number of
Technicians60
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Founded in 1954, Beijing Beiyi Chuangxin Vacuum Technology company is one of the
backbone factories in China’s vacuum equipment industry. Its major products include
low-vacuum, high-vacuum and ultrahigh-vacuum acquisition equipment, vacuum
application equipment, vacuum measuring and membrane thickness monitoring
instruments and large vacuum projects, totaling more than 30 series and 160 kinds. In
1998 the Company gained the ISO 9001-1994 certificate.
Remarks
The enterprise has now complete workshops and public facilities such as power, water,
heat and sewage systems, which will guarantee successful implementation of this
project.
Tel +86 10 65813719 Contact Persons Zhang Huiran, Hao Gang
+86 10 65815028
Table on Introduction of Investment
Name The 20MW solar cell module product line
Sponsor Enterprise Beijing Haohua Energy Corporation
Construction Site Mentougou Coal Mine Yard, Mentougou District, Beijing
Total Investment USD28.51 million Investment With Fixed Assets USD23.43 million
Circulating Funds USD5.08 million
IntentionsAll kinds of joint investment and cooperation are welcomed with cashes,
technology, equipment as investment and with no restriction on share.
Enterprise
Potentials for
Development
With rich solar resource and mature photovoltaic technology, the project, an
environmentally friendly new resource, will be the largest one in China. With the
introducetion of the Western Development Program and with the implementation of
‘Brightness Project’ Region, large quantities of solar cells are needed and the
demands rise rapidly. In the international market, the scale of photovoltaic cell
market becomes large and the market expands rapidly. It develops towards the
Opticelectronic screen wall combined with construction and towards merge network
electricity generation. It develops from the supplement to energy to the substitution
of energy.
Product TitleNewly
Increased Functions
1Polycrystal
silicon chips12.5 million
Polycrystal silicon chip is the major
material for making solar cells and solar
cell modules.
Market
In the international market, the solar battery market is of big scale. Each
government supports it and the growth rate of the solar cell module amounts to 30%.
It develops towards the optoelectronic screen wall combined with construction and
towards merge network electricity generation. It develops from the supplement to
energy to the substitution of energy. The world photovoltaic industry increased
annually by 20% from 1980 to 1997. It is estimated that the output of solar cells will
reach 1,600 MW by 2010 and the production value will reach USD 3 billion.
The internal market of the solar cell in China is of small scale. However, large
quantities of photovoltaic batteries are needed and the demands increase rapidly
because of the driving effect of implementation of China’s ‘Brightness Project’.
From 2002 to 2005, the use of photovoltaic system in China will rise at a large
margin and it is estimated to be 20MW. There will be a product line generating
10Mw per year after 2005.
Techniques
After being tested and etched, the silicon materials are ingoted with directional
solidification method, then sliced into silicon chips with multi-thread cutting
machine and classified after washing and testing.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD31.25 million Total Annual Profit USD13.67 million
Annual After-Tax
ProfitUSD9.16 million
Introduction to
EnterpriseTotal Assets
RMB¥366
million Registered Capital
RMB¥238
million
Number of
Employees12698
Number of
Technicians772
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Beijing Haohua Energy Corporation is the stock company limited that is
initiated first by Beijing Jinmei Group Company Ltd and established by Beijing
Jinmei Group Company as well as China Coal Industry Import and Export Group
Company, the Capital Steel Company, Huangkuang Longteng Science and
Technology Stock Company Ltd. and Coal Science and Technology Research Center.
Its business ranges from coal exploitation, selection and processing, export and sale,
to power exploitation and supply, to coal product manufacture, further processing,
sale and export, to energy source development, research, production and sale, to
technology consultation, transfer and introduction and so on. The internal accounting
units under the direct management of the company have passed ISO9001, 2002
quality management system certification and OHS18001 one by one. The leading
product of company is clear and environmentally friendly kilkenny coal and its
brand has been registered as “Jingjujie”. The company is one of the largest export
bases of kilkenny coal with an annual export of 2 million tons. With the advanced
quality check technology and perfect saving and transfer system, it is the one of the
coal manufacturer nearest to a port in North China. While developing leading coal
products, the company will focus on the expansion of new sources and new
materials.
Remarks
The company now has workshops and pubic facilities such as power supply, water
supply, heating and sewage disposal and it can assure smooth operation of the
project.
Tel +86 10 69842292 Contact Person Sun Guangwei
Table on Introduction of InvestmentName Microelectronic device project
Sponsor Enterprise Beijing SevenStar Huachuang Electronic Co. ,Ltd.
Construction Site 1 Jiuxianqiaodonglu, Chaoyang District, Beijing
Total Investment USD14 million Investment With Fixed Assets USD 12 million
Circulating Funds USD 2 million
Intentions
On the basis of equal and mutual benefits, sincere cooperation is welcomed to
together exploit the market of great potential in China and to extend to the
international market. The foreign company is supposed to have the similar industry
background with technology strength and customer channels. Ways and ratio are not
restricted.
Enterprise
Potentials for
Development
The state government sets down the development plan in ‘Planning Outline of
Information Industry in the Tenth Five-Year Plan’ that development focus should be
on microelectronic special devices, the device specially designed for electronic
elements production, the device specially designed for vacuum electronics
production, the installment and linking device of the complete machine and dies.
The company is the chief councilor enterprise of China Special Equipment
Association and it is the core part of Beijing North Micro Electronic Equipment
Base. It is the key enterprise of China micro electronic equipment development.
SevenStar Huachuang is the key enterprise of microelectronic equipment production
in China and keeps ahead in terms of product quality, quantity, kind and technology.
The company has gained rich experience of relevant preparation technology and
management and human resource reserve in many years’ practice. Now its micro
electronic equipment has occupied over 60% of the market share of the domestic
equipment in China.
Product Title
Newly
Increased
Output Volume
Functions
1 Diffusion furnace 30 The device specially designed for
electronics produced in the project
reaches or is close to the level of foreign
devices and it can replace the foreign
product.
2 Etching machine 15
3 Cleaning machine 40
Market
The integrate circuit industry develops rapidly. According to the estimation of China
semiconductor Association, the total investment in integrate circuit will exceed 100
billion RMB from 2001 to 2005 and it will drive the domestic demands for integrate
circuit devices and the materials.
Techniques1. Automatic slice transfer system; 2. Single-slice seal technique; 3. The ten-level
purification system; 4. Particulate pollution control technology; 5. Reaction chamber
structure design technology.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
Income
RMB¥315
million
Total Annual
ProfitRMB¥53 million
Annual After-Tax
ProfitRMB¥45 million
Introduction to
Enterprise Total AssetsRMB¥320
million Registered CapitalRMB¥74.6
million
Number of
Employees
1163 Number of
Technicians
60
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Founded in September. 2001, Beijing SevenStar Huachuang Electronic Co. Ltd. is
the councilor-in-chief enterprise of China Industry Council of Equipment Designed
Especially for Electronics and the vice councilor-in-chief enterprise of China
Electronic Equipment Parts Association. It has first class production environment,
processing methods and check devices with ISO9001 quality management system
certification recognized by American RAB, Netherlands RVA, Japanese JAB and
British UKAS, European CE certification and the army standard system certification
of China. Keeping market driven, quality based, research and development led, the
company seeks super excellence and provides good products to the society. It
employs an expert technology commission made up of many well-known
experienced experts in China. It owns a new technology research center specialized
in technology prospective research and a municipal technology center of Beijing
consisting of six professional departments. The company has established an effective
technology innovation mechanism and technology system, which provides good
assurance for its development. It is the largest manufacturer of semiconductor
equipment. It is also the largest manufacturer of production equipment of vacuum
electronic display products and vacuum electronics parts and equipments.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64359040 Contact Person Li Jibin
Table on Introduction of InvestmentName Flow meter project
Sponsor
EnterpriseBeijing SevenStar Huachuang Electronic Co. Ltd.
Construction
Site1 Jiuxianqiaodonglu, Chaoyang District, Beijing
Total Investment USD 4 million Investment With Fixed Assets USD 3 million
Circulating Funds USD 1 million
Intentions
On the basis of equal and mutual benefits, sincere cooperation is welcomed to together exploit the market of great potential in China and to extend to the international market. The foreign company is supposed to have the similar industry background with technology strength and customer channels. All kinds of cooperation are welcomed. The foreign company can bring in technology as investment and the share ratio is not restricted.
Enterprise
Potentials for
Development
It has been more than 20 years since the company developed the first Chinese gas
quality flow controller in 1979. It is now the only large factory producing gas quality
flow controllers in China. With absolute advantages of quality, quantity, kinds and
technology in China, its products has already occupied over 85% of the market share.
After many years’ operation, the company has established a set of normative
management mechanism, highly efficient development system, perfect marketing
network and kept its leading role in competition. All kinds of performance indicators
and flowmeters produced by the company reach or are close to the international level
of the similar production. Its products has won many prizes, for example, ‘the state
science and technology achievement prize’ and first prize of electro-mechanics
ministry quality check and its products are recommended by China Consumer
Protection Fund as ‘products recognized by customers’.
Product Title
Newly
Increased
Output Volume
Functions
1 Numerical gas quality 4200 1. Digital simulation compatibility:
flow meter
directly replace original mimetic quality
flow controller.
2. Use of 8-digit or 16-digit multi-
function micro processor clip and coating
elements and realization of micromation.
3. RS23 and RS485 are compatible and
can be switched over.
4. Software can be updated by the use of
flash storage.
5. The product appearance and the
electromechanical interface are of
international standard and can replace
foreign products.
Market
Gas quality flow controller (MFC) is used for accurately measuring and controlling gas
quality flow and is used widely in semiconductor and integrate circuit product lines,
optical fiber prefabricated stick smelting, similar adamas coating,man made crystal
manufacture, plasma spray painting, development of superconducting material, nuclear
fuel disposal, carbon fiber production and other high tech fields. In addition, it is used
widely also in vacuum coating, oil, chemical industry, pharmacy, gas making and other
industries.
Techniques
Numerical flow meter contains but only numerical technology but also technology of
flow sensors and adjusting valves and the key technology is as follows:
Numerical flow measure and flow control technology: includes automatic back-
zero, lineal correction and numerical PID control.
Serial communication: RS232, RS485 and on-scene industrial bus line technology.
Artificial intelligence technology: programmable control, automatic calibration,
breakdown judgment and treatment and other technology.
Sensors: development of highly precise and less drifty quality flow sensors.
Adjusting valves: development of metal membrane valves specially designed for
micro electronic technique and pressure-resisting adjusting valves used in oil
chemistry industry.
Construction
Period1 year
Expected
Economic
Benefit
Annual Sales
IncomeRMB¥45 million
Total Annual
ProfitRMB15 ¥million
Annual After-Tax
ProfitRMB¥15 million
Introduction to Total Assets RMB¥320 Registered Capital RMB¥74.6
Enterprise
million million
Number of
Employees1163
Number of
Technicians444
Level of TechnologyAdvanced in
China
Technological
Level of
Equipment
1990s
Founded in September. 2001, Beijing SevenStar Huachuang Electronic Co. Ltd. is the
councilor-in-chief enterprise of China Industry Council of Equipment Designed
Especially for Electronics and the vice councilor-in-chief enterprise of China
Electronic Equipment Parts Association. It has first class production environment,
processing methods and check devices with ISO9001 quality management system
certification recognized by American RAB, Netherlands RVA, Japanese JAB and
British UKAS, European CE certification and the army standard system certification of
China. Keeping market driven, quality based, research and development led, the
company seeks super excellence and provides good products to the society. It employs
an expert technology commission made up of many well-known experienced experts in
China. It owns a new technology research center specialized in technology prospective
research and a municipal technology center of Beijing consisting of six professional
departments. The company has established an effective technology innovation
mechanism and technology system, which provides good assurance for its
development. It is the largest manufacturer of semiconductor equipment. It is also the
largest manufacturer of production equipment of vacuum electronic display products
and vacuum electronics parts and equipments.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64359040 Contact Person Li Jibin
Table on Introduction of InvestmentName Electric vacuum equipment project
Sponsor
EnterpriseBeijing SevenStar Huachuang Electronic Co. Ltd.
Construction
Site1 Jiuxianqiaodonglu, Chaoyang District, Beijing
Total Investment USD5 million Investment With Fixed Assets USD4 million
Circulating Funds USD1 million
Intentions
On the basis of equal and mutual benefits, sincere cooperation is welcomed to together
exploit the market of great potential in China and to extend to the international market.
The foreign company is supposed to have the similar industry background with
technology strength and customer channels. Ways and ratio are not restricted.
Enterprise
Potentials for
Development
Founded in 1965, SevenStar Huachuang Micro Electronics sub-company is the key
enterprise of research, development and manufacture of information industry basic
equipment. Its melting control, vacuum and heat engineering technology now keep
ahead in the country.
Product Title
Newly
Increased
Output Volume
Functions
1 Vacuum furnace 25Leading vacuum technology, temperature
control technology and gas protection
technology in the country
2 Hydro furnace 20
3Industrial tunnel
furnace20
Market
The product is used widely in high-temperature alloy and titanium alloy of aviation and
space flight and heat processing of special material; vacuum quenching and tempering
of dies and cutting tools; vacuum brazing and highly vacuum covering and discharging
once for all in the electronic filed; vacuum annealing and aging treatment in the
medical field; agglomeration of magnetic material and hard alloy in the powder
metallurgy field; quenching, light annealing and vacuum brazing in industrial heat
processing.
Techniques Research, development and manufacture of all kinds of industrial furnace by using
melting control, vacuum and heat engineering and other technology.
Construction
Period1 year
Expected
Economic
Benefit
Annual Sales
IncomeRMB¥80 million
Total Annual
ProfitRMB¥12 million
Annual After-Tax
ProfitRMB¥12 million
Introduction to
Enterprise
Total AssetsRMB¥320
million Registered Capital
RMB¥74.6
million
Number of
Employees1163
Number of
Technicians444
Level of TechnologyAdvanced in
China
Technological
Level of
Equipment
1990s
Founded in September. 2001, Beijing SevenStar Huachuang Electronic Co. Ltd. is the
councilor-in-chief enterprise of China Industry Council of Equipment Designed
Especially for Electronics and the vice councilor-in-chief enterprise of China
Electronic Equipment Parts Association. It has first class production environment,
processing methods and check devices with ISO9001 quality management system
certification recognized by American RAB, Netherlands RVA, Japanese JAB and
British UKAS, European CE certification and the army standard system certification of
China. Keeping market driven, quality based, research and development led, the
company seeks super excellence and provides good products to the society. It employs
an expert technology commission made up of many well-known experienced experts in
China. It owns a new technology research center specialized in technology prospective
research and a municipal technology center of Beijing consisting of six professional
departments. The company has established an effective technology innovation
mechanism and technology system, which provides good assurance for its
development. It is the largest manufacturer of semiconductor equipment. It is also the
largest manufacturer of production equipment of vacuum electronic display products
and vacuum electronics parts and equipments.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64359040 Contact Person Li Jibin
Table on Introduction of InvestmentName Quartz frequency devices project
Sponsor Enterprise Beijing SevenStar Huachuang Electronic Co. Ltd.
Construction Site 1 Jiuxianqiaodonglu, Chaoyang District, Beijing
Total Investment USD55 million Investment With Fixed Assets USD50 million
Circulating Funds USD5 million
Intentions
On the basis of equal and mutual benefits, sincere cooperation is welcomed to
together exploit the market of great potential in China and to extend to the
international market. The foreign company is supposed to have the similar industry
background with technology strength and customer channels. Ways and ratio are not
restricted.
Enterprise
Potentials for
Development
China now attaches much importance to the development and production of new
devices. It is firstly mentioned in ‘the Tenth Five-Year Plan Planning outline of
Information Industry’ that the new device is of the same importance with software
and integrate circuit, it is the core of competitiveness of electronic and information
products manufacture and that strengthening the design and production of the key
devices are the most important focus of information industry development in China.
The company is the key enterprise of quartz frequency devices development and
production and its products’ quality and technology content keep ahead in this
industry. The company has established a set of highly efficient, flexible, wise
management and normative, highly efficient development mechanism and perfect,
active and quickly reactive marketing network after many years’ operation and set up
its role in competition in the market. By making use of current marketing network,
the company delivers the new products to the customer as quickly as possible. In the
mean time, Beijing municipal government has identified integrate circuits as the
focus of information industry, which creates favorable conditions for the company to
entering the market.
Product Title
Newly
Increased
Output Volume
Functions
1 VCXO 5 million Use of vitrified surface coating package
of 7 x 5mm industrial standard, 2 TCXO 4 million
frequency range from 1MHz to 133MHz
and temperature range from - 40℃ to
3 SMD 3 million
Market
As one of the key frequency devices in information industry and key part of
electronics, quartz crystal is used widely in wireless communication, mobile
communication, optical fiber communication, computer, household appliance and
broad band, etc. It is also plays a similarly important role in military electronic
devices. Crystal devices are indispensable in any field relating to time and frequency.
Digitization and on-line of information industry require corresponding SMD quartz
crystal with small size crystal, high frequency, high stable, low power consumption ,
ultra-thinness and ultra-smallness to be the necessary elements of rapidly growing
net and telecommunication market.
Techniques
Generally speaking, other crystal oscillators are all fixed on one single frequency but
the programmable crystal oscillator can expand the range of frequency and specify
the frequency point freely. Besides, its output logic is compatible with TTL and
high-speed CMOS (HCMOS) or TTL/HCMOS and can improve device adaptability
and design flexibility, thus reducing the manufacture cost under similar conditions.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeRMB¥70 million
Total Annual
ProfitRMB¥10 million
Annual After-Tax
ProfitRMB¥10 million
Introduction to
Enterprise Total AssetsRMB¥320
million Registered CapitalRMB¥74.6
million
Number of
Employees
1163 Number of
Technicians
444
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Founded in September. 2001, Beijing SevenStar Huachuang Electronic Co. Ltd. is
the councilor-in-chief enterprise of China Industry Council of Equipment Designed
Especially for Electronics and the vice councilor-in-chief enterprise of China
Electronic Equipment Parts Association. It has first class production environment,
processing methods and check devices with ISO9001 quality management system
certification recognized by American RAB, Netherlands RVA, Japanese JAB and
British UKAS, European CE certification and the army standard system certification
of China. Keeping market driven, quality based, research and development led, the
company seeks super excellence and provides good products to the society. It
employs an expert technology commission made up of many well-known
experienced experts in China. It owns a new technology research center specialized
in technology prospective research and a municipal technology center of Beijing
consisting of six professional departments. The company has established an effective
technology innovation mechanism and technology system, which provides good
assurance for its development. It is the largest manufacturer of semiconductor
equipment. It is also the largest manufacturer of production equipment of vacuum
electronic display products and vacuum electronics parts and equipments.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64359040 Contact Person Li Jibin
Table on Introduction of InvestmentName Microelectronic packaging and assembling project
Sponsor Enterprise Beijing SevenStar Huachuang Electronic Co. Ltd.
Construction Site 1 Jiuxianqianodonglu, Chaoyang District, Beijing
Total Investment USD6 million Investment With Fixed Assets
USD 5 million
Circulating Funds USD 1 million
Intentions
On the basis of equal and mutual benefits, sincere cooperation is welcomed to
together exploit the market of great potential in China and to extend to the
international market. The foreign company is supposed to have the similar industry
background with technology strength and customer channels. Ways and ratio are not
restricted.
Enterprise
Potentials for
Development
Beijing SevenStar Huachuang Electronic Co. Ltd. is the hi-tech electronics
enterprise specializing in research, development, design and production of composite
integrate circuits. Since the first product line built in 1967, the membrane composite
integrate circuits product line has produced large quantities of thick membrane
integrate modules for aviation and spaceflight and it is one of the earliest
professional enterprises producing thick membrane composite integrate circuits.
The company now employs over 40 researchers and technicians specializing in thick
membrane research and development, among which there are 2 professor level
senior engineers granted special allowance by the government and 9 senior
engineers.
Product Title
Newly
Increased
Output Volume
Functions
1 DC/DC module 1.2 millionThe product module has the features of
high proficiency, small size, good heat
emission and high reliability.
2Automobile
electronics module1 million
3 SMT module 0.7 million
MarketThe products are used mainly in aviation, spaceflight, radar, communication,
computers, automatic control, signal processing and automobile electronics.
TechniquesThick membrane composite integrate circuit manufacture technique refers to SMT
technique. That is to say, the second integration of a few universal devices such as
chip resistors, capacitors, diodes and triodes makes them special functions.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
Income
RMB¥112
million
Total Annual
ProfitRMB¥18 million
Annual After-Tax
ProfitRMB¥16 million
Introduction to
Enterprise Total AssetsRMB¥320
million Registered CapitalRMB¥74.6
million
Number of
Employees
1163 Number of
Technicians
444
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Founded in September. 2001, Beijing SevenStar Huachuang Electronic Co. Ltd. is
the councilor-in-chief enterprise of China Industry Council of Equipment Designed
Especially for Electronics and the vice councilor-in-chief enterprise of China
Electronic Equipment Parts Association. It has first class production environment,
processing methods and check devices with ISO9001 quality management system
certification recognized by American RAB, Netherlands RVA, Japanese JAB and
British UKAS, European CE certification and the army standard system certification
of China. Keeping market driven, quality based, research and development led, the
company seeks super excellence and provides good products to the society. It
employs an expert technology commission made up of many well-known
experienced experts in China. It owns a new technology research center specialized
in technology prospective research and a municipal technology center of Beijing
consisting of six professional departments. The company has established an effective
technology innovation mechanism and technology system, which provides good
assurance for its development. It is the largest manufacturer of semiconductor
equipment. It is also the largest manufacturer of production equipment of vacuum
electronic display products and vacuum electronics parts and equipment.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64359040 Contact Person Li Jibin
Table on Introduction of InvestmentName Microwave devices project
Sponsor Enterprise Beijing SevenStar Huachuang Electronic Co. Ltd.
Construction Site 1 Jiuxianqiaodonglu, Chaoyang District, Beijing
Total Investment USD1.2 million Investment With Fixed Assets USD1 million
Circulating Funds USD0.2 million
Intentions
On the basis of equal and mutual benefits, sincere cooperation is welcomed to
together exploit the market of great potential in China and to extend to the
international market. The foreign company is supposed to have the similar industry
background with technology strength and customer channels. Ways and ratio are not
restricted.
Enterprise
Potentials for
Development
Microwave products are of high additional value and can be used in aviation,
spaceflight, radar, electronic countermeasure, communication and remote sensing
and other fields. In recent years, the development of communication and increase of
the car market have made the demands for civil microwave products rise
considerably.
Product Title
Newly
Increased
Output Volume
Functions
1Microwave
equipment kit1000
Introduction of mature microwave
development and production technology
in order for exploitation of new product
fields in the future development of the
company.
2Microwave
component6000
3 Micro packaging 600
Market
The research, development, design, production of micro wave devices, equipment
kits and micro packaging and other products, used widely in the electronic devices of
aviation, spaceflight, radar, electronic countermeasure, communication and remote
sensing systems and taking charge of manufacturing consignment both from inside
and from outside of China.
Techniques
Apply mature micro technology production to micro wave devices, equipment kits
and micro packaging and other products used widely in the electronic devices of
aviation, spaceflight, radar, electronic countermeasure, communication and remote
sensing systems
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
Income
RMB¥20.7
million
Total Annual
Profit RMB¥8 million
Annual After-Tax
ProfitRMB¥8 million
Introduction to
Enterprise
Total AssetsRMB¥320
million Registered Capital
RMB¥74.6
million
Number of
Employees1163
Number of
Technicians444
Level of Advanced in Technological 1990s
Technology ChinaLevel of
Equipment
Founded in September. 2001, Beijing SevenStar Huachuang Electronic Co. Ltd. is
the councilor-in-chief enterprise of China Industry Council of Equipment Designed
Especially for Electronics and the vice councilor-in-chief enterprise of China
Electronic Equipment Parts Association. It has first class production environment,
processing methods and check devices with ISO9001 quality management system
certification recognized by American RAB, Netherlands RVA, Japanese JAB and
British UKAS, European CE certification and the army standard system certification
of China. Keeping market driven, quality based, research and development led, the
company seeks super excellence and provides good products to the society. It
employs an expert technology commission made up of many well-known
experienced experts in China. It owns a new technology research center specialized
in technology prospective research and a municipal technology center of Beijing
consisting of six professional departments. The company has established an effective
technology innovation mechanism and technology system, which provides good
assurance for its development. It is the largest manufacturer of semiconductor
equipment. It is also the largest manufacturer of production equipment of vacuum
electronic display products and vacuum electronics parts and equipments.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64359040 Contact Person Li Jibin
Table on Introduction of InvestmentName Special manufacture equipment for rechargeable cells
Sponsor Enterprise Beijing Seven Star HuaDian Science (Group) Co., Ltd.
Construction Site 1 Jiuxianqiaodong Road, Chaoyang District, Beijing
Total Investment USD2 million Investment With Fixed Assets USD1 million
Circulating Funds USD1 million
Intentions We seek to establish a joint venture with a foreign partner. The Chinese party holds
51% of stocks and the foreign party holds 49%. The foreign party may first
investment with advanced technologies but some investment must be in cash. It is
preferable that the foreign party has external sales channels.
Enterprise
Potentials for
Development
The Company ranks the first among special lithium ion cell and nickel-hydrogen cell
equipment manufactures with 50% of comprehensive market share. It is the only
rechargeable cell manufacturer in China that can provide the whole set of equipment.
Product Title
Newly
Increased
Output Volume
Functions
1 Vacuum mixer 60 This is a research, manufacture and sales
project for special manufacture
equipment. The products are automatic
and semiautomatic secondary cell
manufacture equipment, including
product design, material mixture, semi-
product manufacture, finished product
manufacture, testing, etc.
2 Rolling machine 70
3 Coating machine 20
4Pulp suspending
machine5
5Liquid filling
machine5
Market
At present the secondary cell market in China increases by over 20% annually. As
the demands are growing and the imported ones cost too much, it is urgent for the
level of key technologies in China to be promoted. The Company’s special
manufacture equipment for secondary cells increase by over 80% on average
annually in sales.
Techniques
In design, elastic deformation is made to the equipment during use with cell
manufacture techniques so as to achieve best cell product quality. Additionally,
special techniques guarantee high accuracy of the equipment and realize micrometer-
level accuracy in assemblage. Highly precise essential equipment is needed during
the production of cell pole segments.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD10 million
Total Annual
ProfitUSD2 million
Annual After-Tax
Profit USD0.8 million
Introduction to
EnterpriseTotal Assets
RMB¥1.02
billion Registered Capital
RMB¥590
million
Number of
Employees2,369
Number of
Technicians170
Level of Advanced in Technological 1980s
Technology ChinaLevel of
Equipment
SevenStar Huadian Group was established in December 2000 after assets
restructuring. The leading products are HIC, highly reliable, stable and precise
resistances and capacitors, quartz crystal components, magnetic materials,
electroacoustic components, microelectronic processing equipment (micro-diffusion
system, dry etching system, PECVD, quality flow controller), electric-vacuum
equipment, industrial furnace equipment and cell equipment.
The strategic essential of SevenStar Huandian Group is microelectronic components,
microelectronic assembly technology and products, as well as investment in hi-tech
industrialization mainly of microelectronic equipment. The Group has 7 product
research institutes, 3 of which are city-level technological research centers, 1 electric
component testing center which is leading in China, and the Group is the chief
councilor of China Special Electric Equipment Industry, vice-councilor of China
Electric-Vacuum Academy, vice-councilor of China Association of Electric
Component Industry, and chief councilor Branch Association of Resistance and
Potentiometer, Branch Association of Electroacoustic Component and Branch
Association of Piezoelectric Crystal.
Based on the Group’s strength in microelectronic technologies, State Development
and Reform Commission, Ministry of Science andTechnologies, Ministry of
Information Industry, Beijing Municipal Government established China Northern
Microelectronic Equipment Base in October 2001 jointly with research institutes
such as Peking University and Fudan University.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64377067 Contact Person Jin Lu
Table on Introduction of InvestmentName EMI game component
Sponsor Enterprise Beijing SevenStar Feixing Electronic Co., Ltd.
Construction Site 4 Jiuxianqiaolu, Chaoyang District, Beijing
Total Investment USD1.5 million Investment With Fixed Assets USD1.1 million
Circulating Funds USD0.4 million
Intentions We seek partners with mass production technologies to jointly construct EMI game
component (filter) production line with design and manufacture of 500,000
monolithic feed-through filters, circular, C-type and D-type array filters. The partner
should have techniques in design and manufacture of 55-pin array filters. Investment
will be made jointly with a negotiable proportion.
Enterprise
Potentials for
Development
China implements the compulsory EMC standards. High assembly density and high
computing speed have higher requirements for EMC. Feed-through filters assembled
with monolithic capacitors can satisfy EMC requirements with high specific volume.
The Company’s tube filters, monolithic feed-through filters and array filters will take
over some market with small size, large capacity and high reliability. With
densification of filtering connectors, tube filtering connectors will be gradually
replaced by monolithic array ones, which are the orientation of the Company’s
researches.
Product Title
Newly
Increased
Output Volume
Functions
1 Tube filter 250,000 C-type and D-type array board filter is a
new kind developed by the EMI game
component production line. With
monolithic processing, it features small
size, large capacity, easy installation and
can replace many kinds of tube filters.
The capacity can be 2.2μF with rated
current of 5A-15A and rated voltage of
50-500Vdc. 1KV-3KV high-voltage and
other series can be supplied on demand.
2Monolithic feed-
through filter200,000
3 Circular array filter 25,000
4 D-type array filter 25,000
Total 500,000
Market
EMC issues cover a large range. Filtering connectors and interface connects with
filtering functions are widely used in information and electronic products, promising
a large market for filters. China has made compulsory national standards, and will
compulsively execute 3C certification including EMC. Now it is the best opportunity
to construct EMI game component production lines. As the demands for filtering
connectors will rise sharply, who seizes the opportunities gains initiatives in the
future market competition.
At present the annual output of electric connector manufacturers is approximately
9.6 million sets with an annual output amount of nearly 1.6 billion RMB. However,
only 0.2% of the electric connectors are filtering connectors, which require
appurtenant filters of 1.2 million valued at 4 million RMB. The potential demands
will increase by nearly 100%.
Techniques Wet printing processing initiated by US ACI Company with reference to advanced
technologies abroad.
Construction Half a year
Period
Expected
Economic Benefit
Annual Sales
IncomeRMB¥2 million
Total Annual
Profit
RMB¥0.25
million
Annual After-Tax
Profit
RMB¥0.21
million
Introduction to
Enterprise
Total AssetsRMB¥1.02
billion Registered Capital
RMB¥590
million
Number of
Employees577
Number of
Technicians733
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1980s
SevenStar Huadian Group was established in December 2000 after assets
restructuring. The leading products are HIC, highly reliable, stable and precise
resistances and capacitors, quartz crystal components, magnetic materials,
electroacoustic components, microelectronic processing equipment (micro-diffusion
system, dry etching system, PECVD, quality flow controller), electric-vacuum
equipment, industrial furnace equipment and cell equipment.
The strategic essential of SevenStar Huandian Group is microelectronic components,
microelectronic assembly technology and products, as well as investment in hi-tech
industrialization mainly of microelectronic equipment. The Group has 7 product
research institutes, 3 of which are city-level technological research centers, 1 electric
component testing center which is leading in China, and the Group is the chief
councilor of China Special Electric Equipment Industry, vice-councilor of China
Electric-Vacuum Academy, vice-councilor of China Association of Electric
Component Industry, and chief councilor Branch Association of Resistance and
Potentiometer, Branch Association of Electroacoustic Component and Branch
Association of Piezoelectric Crystal.
Based on the Group’s strength in microelectronic technologies, State Development
and Reform Commission, Ministry of Science and Technologies, Ministry of
Information Industry, Beijing Municipal Government established China Northern
Microelectronic Equipment Base in October 2001 jointly with research institutes
such as Peking University and Fudan University.
RemarksThe company now has workshops and good public facilities such as water supply,
power supply and heating. It can assure smooth operation of the project.
Tel +86 10 64377898 Contact Person Wang Yanling
13311192193
Table on Introduction of InvestmentName New-type laser
Sponsor Enterprise Beijing Institute of Optic-electronic Technology
Construction Site Inside the enterprise CA-20 Donghuangchenggen beijie,Beijing
Total Investment USD0.25 million Investment With Fixed Assets USD0.17 million
Circulating Funds USD80,000
Intentions
We hope to cooperate with the foreign company to set up a research, development
and production entity. The foreign company is supposed be of capital and marketing
advantages.
The foreign company can have the share of 50% of the cooperation company by
bringing in cashes, or 30% by bringing in equipment or 70% by bringing technology.
Enterprise
Potentials for
Development
1.44µm and 2.94µm YAG lasers are used widely and effectively in clinical treatment
and their demands are great inside and outside. The Institute has undertaken the
research and development of the products for many years and taken charge of many
key national science and technology tasks. Its product level has kept ahead in the
domestic market. The new laser developed recently not only fills the gap in the
country but also meets the demands in the domestic and international market.
Cooperation with the foreign company to produce the new laser will facilitate the
further exploration of the domestic and international market, thus improving
profitability.
Product Title
Newly
Increased
Output Volume
Functions
1 The 1.44µmYAG 100 1.44µm and 2.94µm lasers are those with
laser the best wavelength for human’s
absorption. They have good functions of
cutting and evaporation. In the two, that
of 1.44µm wavelength can use cheap
common optical fiber.
2The 2.94µmYAG
laser100
Market
The new laser refers to the solid laser with specific wave length, for example,
1.44µmYAG and 2.94µmYAG lasers. Its key technology has not been mastered and
no product can be made only with key technology assistance. However, the kind of
laser is used widely and effectively in clinical treatment, especially in the hospitals
above the alpha level where such equipment is installed. If we succeed in
cooperating with the foreign company with the relevant technology, we can replace
all the imported equipment and can also export them by making use of the
advantageous quality to price ratio of products inside.
Techniques
Due to its adaptation complexity and production discreteness, laser appliance system
is difficult to reach the automatic production in the world and the labor cost is rather
high. The project can make best use of the good labor resource inside for mass
production.
Construction
Periodone year
Expected
Economic Benefit
Annual Sales
IncomeUSD2 million Total Annual Profit USD0.5 million
Annual After-Tax
ProfitUSD300,000
Introduction to
EnterpriseTotal Assets
RMB¥57.12
millionRegistered Capital
RMB¥10.78
million
Number of
Employees216
Number of
Technicians113
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
As one of the key research centers in Beijing, Beijing Institute of Opto-electronic
Technology is the research center of the laser industry of the State Machine and
Industry Bureau and is also the internal technology center of ‘Optic radiation safety
and laser devices’ of the International Electrotechnical Commission (IEC)TC76. It is
approved by the Beijing Science and Technology Commission as ‘the pilot base of
laser medical equipment in Beijing’ and owns ‘the laser exploration and examination
lad’ constructed under the approval of Beijing Science Fund Commission. In 1998, it
was approved by the State Bureau of Medical Administration as ‘the research center
of laser medical equipment project’. The laser parameter measure department of
Beijing Institute of Opto-electronic Technology is approved by the State Science and
Technology Commission as ‘the measure center of laser parameters in Beijing’; it
also becomes ‘the product quality supervision and inspection center of laser
equipment of the Ministry of Machine and Industry. The products of researches of
laser equipment, laser technology appliance and photoelectric technology appliance
in the center have won more than 100 prizes from the state, the ministry and the
municipal government.
Located at the downtown of Beijing, close to China Gallery and Huangchenggen
Legacy Park, the center occupies an area of 5,030 square meters with a construction
area of 8,660 square meters. Its Daxing production base has a construction area of
3,000 square meters. Its Miyun production base occupies an area of 10,000 square
meters with a construction area of 6,000 square meters.
The center sets up of several laser technology appliance research departments and
also has machine processing workshop and optic processing workshop. Its products
are popular all over China and are exported to the international market. Among
them, laser medical equipment is the product of the most kinds and most exportation
in China.
RemarksIt can assure smooth operation of the project with workshops and good public
facilities such as water supply, power supply and heating, etc.
Tel +86 10 64040157 Contact Person Liang Zhiyuan
Table on Introduction of InvestmentName Manufacture of laser medical equipment and cosmetology equipment
Sponsor Enterprise Beijing Institute of Opto-electronic Technology
Construction Site Inside the enterprise CA20 Donghuangchenggenbeijie, Beijing or at the foreign
party’s site
Total Investment USD 0.6 million Investment With Fixed Assets USD 0.45 million
Circulating Funds USD 0.15 million
Intentions
We hope to establish a joint venture and to cooperate with foreign companies outside
or inside. The foreign company is supposed to be capable of marketing and
technology serve in terms of laser medical equipment and cosmetology equipment.
The foreign company can have 70% shares of the joint venture by bringing in cashes
or equipment. We can also set up a cooperation company. If inside, the foreign
company can have the share 30% by bringing in technology and if outside, the
foreign company can have the share of 80% by bringing workshops and equipment.
Enterprise
Potentials for
Development
Laser medical and cosmetology equipment is the high tech product used in clinical
treatment and beauty parlor with a great market potential and especially great
demands in the international market. The enterprise has undertaken the research and
development of this kind of product for more than 20 years and taken charge of
many key national science and technology tasks and its product level has kept ahead
inside. Cooperation with the foreign company to produce laser medical and
cosmetology equipment will facilitate the further exploration of the domestic and
international market, thus improving profitability.
Product Title
Newly
Increased
Output Volume
Functions
1 CO2 treatment laser 300 Laser’s selective absorption makes it
extremely advantageous in medical and
cosmetology appliance. It has some
characters, such as no scars left and quick
recovery.
2 YAG treatment laser 200
Market
The laser medical treatment appliance is exploited early in China. Because of
great improvement of manufacture level and quality of laser medical equipment as
well as the lower price than those of the western countries, the medium and low level
medical equipment are of much competitiveness in the international market. In the
recent years, they have been exported to foreign countries and exportation has been
increasing. Just like the situation in the world, the CO2 laser and the YAG laser are
the major medical lasers in China. With regard to the sales ratio of each kind of
treatment laser, the first one is CO2 treatment laser with all types of powers,
accounting for 37%, the second is YAG treatment laser, 21% and the tow account for
58% of the total of the laser treatment equipment in the market. Therefore, there is a
large market capacity in the domestic and the international market, especially in the
cosmetology market.
TechniquesThe manufacture of laser medical equipment is required to be precise with key parts
made in the closed environment and common parts purchased in the international
market.
The equipment is of a good quality to price ratio. Its quality reaches the same level
as that in the same period in the international market but the price is only 1/3 to 1/5
of that in western countries.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD 2 million Total Annual Profit USD 0.6 million
Annual After-Tax
ProfitUSD 0.30 million
Introduction to
EnterpriseTotal Assets
RMB¥57.12
millionRegistered Capital
RMB¥10.78
million
Number of
Employees216
Number of
Technicians113
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
One of the key research centers in Beijing, Beijing Institute of Opto-electronic
Technology is the research center of the laser industry of the State Machine and
Industry Bureau and is also the internal technology center of ‘Optic radiation safety
and laser devices’ of the International Electrotechnical Commission (IEC)TC76. It is
approved by the Beijing Science and Technology Commission as ‘the pilot base of
laser medical equipment in Beijing’ and owns ‘the laser exploration and examination
lad’ constructed under the approval of Beijing Science Fund Commission. In 1998, it
was approved by the State Bureau of Medical Administration as ‘the research center
of laser medical equipment project’. The laser parameter measure department of
Beijing Institute of Opto-electronic Technology is approved by the State Science and
Technology Commission as ‘the measure center of laser parameters in Beijing’; it
also becomes ‘the product quality supervision and inspection center of laser
equipment of the Ministry of Machine and Industry. The products of researches of
laser equipment, laser technology appliance and photoelectric technology appliance
in the center have won more than 100 prizes from the state, the ministry and the
municipal government.
Located at downtown of the city, close to China Gallery and Huangchenggen Legacy
Park, the institute occupies an area of 5,030 square meters with a construction area
of 8,660 square meters. Its Daxing production base has a construction area of 3,000
square meters. Its Miyun production base occupies an area of 10,000 square meters
with a construction area of 6,000 square meters. The center sets up of several laser
technology appliance research departments and also has machine processing
workshop and optic processing workshop. Its products are popular all over China
and are exported to the international market. Among them, laser medical equipment
is the product of the most kinds and most exportation in China.
RemarksIt can assure smooth operation of the project with workshops and good public
facilities such as water supply, power supply and heating, etc.
Tel +86 10 64040152 Contact Person Liang Zhiyuan
Table on Introduction of InvestmentName Double-Crane Pharmaceutical Co., Ltd. Beijing Daxing Industrial Park
Sponsor
Enterprise
Double-Crane Pharmaceutical Co., Ltd (Beijing).
Construction Site Beijing Daxing Industrial Development Area
Total Investment USD10 million
Intentions
Desire to set up joint venture with foreign partners by means of inviting foreign
investment to realize the internationalized and global developmental strategy and
quicken the modernization of China’s Pharmaceutical industry.
1. Introduce the best-selling products from internationally advanced medicine
corporation, fill up the domestic market deficiency in medicine (pharmaceuticals) and
meet the medicinal demands that are rapidly developing.
2. Absorb the advanced management experience and pharmaceutical technology of
overseas enterprise, esp. in medicinal chemicals, infusion products and natural
medicine, to promote the Chinese level of existing medicinal preparation.
3. By localizing the medicinal products with internationally famous brand and relying
on the Double Crane Pharmaceutical existing network marketing channels distributed
across China, develop the Chinese market together and raise the market share of
international trademark products at home.
Enterprise
Potentials for
Development
1. Double-Crane Pharmaceutical Co., Ltd (Beijing) Ranks the tenth among the Chinese
medicinal enterprises, as a large-scale, modernized group integrating the Science,
industry and commerce in one body
2. Been listed on Shanghai Stock Exchange in 1997, has solid financing operation
capability.
3. Enjoy the preferable reputations and trademark advantages on Chinese market.
4. The project is in line with the pharmaceutical industrial policies and the direction
“developing the medicinal industry” encouraged by Beijing Municipal Government.
5. Compared, in the biomedicine field, with other cities or province, Beijing is
obviously superior to them in the technology, talents and market aspects.
Product Building scale Land area Remarks
Industrial Park 133200m2Absorb funds at home and abroad by joint
venture or cooperation.
Prospect
In recent years, Chinese medicinal industry has developed at the speed higher than that
of GDP. The Chinese bioengineering and new medicine industry entered into the high-
speed development period in 2000 and 2001. Total medicinal industrial output value in
2001 reached 277.8 billion RMB yuan, sales income coming to 209.8 billion RMB
yuan and the total profit approaching 17.6 billion RMB yuan. China has become one of
the medicine markets that grow the most rapidly in the world.
Since “the Ninth Five-Year Plan” , Beijing as the innovation center of China, has
comprehensively promoted the development of bioengineering and new medicinal
industry. The production scale is highly enlarged, annually average increase rises by
over 20%.In 2001, the total medicinal industrial output value amounted to 10 billion
RMB yuan and sales revenue 13.5 billion RMB yuan, breaking the past record (10
billion RMB yuan).
The bioengineering and new medicine industries are Beijing key development industry
in the “Tenth Five-Years Plan”, being potentially captivating in both national
developmental direction of industry and the market prospects.
Construction
Period2 years
Introduction to
Enterprise
Total Assets RMB¥3690 million Registered CapitalRMB¥147millio
n
Number of
Employees16924
Number of
Technicians3167
Level of
Technology
World level or
advanced in China
Technological
Level of
Equipment
1980s and 1990s
Double-Crane Pharmaceutical Co., Ltd (Beijing), listed on the market in 1997, has
since established 23 holding companies of various kinds in ten provinces, strategically
built four mainstream businesses as development supports: the biggest transfusion
supply base, the leading production base of synthetic antimicrobial, the innovation
base of natural medicament and the nationwide medicine sales service system.
Double Crane Pharmaceutical has been a large-scale modernized pharmaceutical
enterprise with its main business covering new medicine development, preparation
production, medicine marketing and medicine equipment. Its main economic
indication is among the top ten in China. And sales revenue surpasses USD460 million,
setting up a company’s record.
Tel +86 10 65060077 Fax +86 10 65072838
Table on Introduction of Investment
Name Projects of medication technology renovation in birth control and reproduction
health
Sponsor Enterprise Beijing ZiZhu Pharmaceutical Co., Ltd.
Construction Site Sanjianfang East Road, Chaoyang District, Beijing
Total Investment USD7.7millionInvestment With Fixed Assets USD6.3million
Circulating Funds USD1.4million
IntentionsInvesting with cashes, without proportion limitation. Various types of joint venture
and cooperation can be chosen.
Potentials for
Development
The productions of this project can compare favorably with the same category of
overseas products in technologies and qualities. After passing the GMP conformity
certification as well as ISO9000 and ISO14001 certification of the international
authorized institutions, our products will have a “passport” to approach the
international market, and then exploit a new market territory.
Mifepristone tablets: going on the market in 1992, it padded the blank in domestic
medical market.
Levonorgestrel tablets: going on the market in 1998, it is the first kind of emergency
contraceptive. Because of providing many women a safe, effective, and simple
contraception method, it possesses about 95% of domestic market share. And the
long result, short result, and quick result contraceptives produced by our company
are decided as pointing varieties by the National Birth Control Committee.
Gestrinone capsules: going on the market in 1998, it is the first drug used for
endometriosis made inland, and its price is more than 55% lower than those
imported ones.
Misoprostol tablets: going on the market in 2000, it can substitute for the similar
kinds of production imported, so that a great deal of foreign exchange is saved,
which can promote the new technology development in the realm of medication for
birth control.
Product Title
Newly
Increased
Output Volume
Functions
1Gestrinone tablets
7 million
granulations
Applied in treatment of endometriosis
2
Levonorgestrel tablets 60 million
tablets
Long result and short result emergency
contraceptives, with easy administration
low side effects and high security.
3
Compound
Levonorgestrel tablets
1.1 billion
tablets
Mifepristone tablets 11 million Anti-early pregnancy drug which has
4tablets
the effect of terminating early
pregnancy.
5 Misoprostol tablets 6 million tablets A drug that can terminate early
pregnancy.
Market
With the development of the population quality and female status, more and more
people put more attention to birth control and reproduction health. The oral
contraceptives, because of their easy taking methods, safety, good effects, and
avoiding operations in hospitals, the sales volume of them has shown an ascending
tendency these years.
At present, there are about 300 million women of childbearing age in our country. It
is predicted that the market demand of short effect contraceptives is 2.4 billion
tablets every year, of emergency contraceptives is 180 million tablets, and of
misoprostol is 30 million tablets every year, and drugs applied in curing
endometriosis is 0.4 billion granules. It is clear that domestic market is every huge.
Further more, most of the women of reproductive life in the wide countryside
haven’t begun to use the above-mentioned contraceptives nowadays. With the
development to the village market, the demand of market will become greater and
greater.
With the profound permeation of birth control as a fundamental State policy, and
with the development of domestic and overseas markets, the productions and
medications for birth control and reproduction health have great market prospects.
Techniques
The main technique renovations in this project include:
1. Technique renovation of polymerization procedures for the raw materials
(the G’s reagent):
Before renovation: ethylene gas—dissolve pot (-45℃)—elevated pot (-
45℃)—format pot.
After renovation: Chloroethylene gas—format pot.
Characteristic: the refrigeration system will not be used after getting rid of
the deep condensers in dissolve pot and elevated pot, so the energy
consumption is decreased.
2. Technique renovation of lithium ammonia procedure of raw materials:
We choose liquid state CO2 as refrigeration medium instead of Cacl2 salt
water.
3. Technique renovation of fermentation procedure of raw materials:
We will adopt advanced technologies and equipments, realize
automatization and achieve intelligent control by using computers.
Construction
Period1 year
Expected
Economic Benefit
Annual Sales
IncomeUSD60 million Total Annual Profit USD 5 million
Annual After-Tax
ProfitUSD 4 million
Introduction to
Enterprise
Total AssetsRMB¥580
millionRegistered Capital
RMB¥380
million
Number of
Employees975
Number of
Technicians329
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990’s
Beijing ZiZhu Pharmaceutical Co., Ltd. occupies an area of 122,000 m2, among
which construction area is 60,000 m2. In 1999, there are 7 workshops and 8 forms of
preparation passing the national GMP certification one-off. The company passed the
ISO9001 certification in 2001. And the company has four series of productions:
preparations for birth control, preparations for reproduction health, modern
ophthalmological preparations, and royal jelly and related preparations.
In the production and development of series of drugs for birth control, there has
formed a considerable scale and predomination in our company. The oral
contraceptives, oral abortion drugs, and emergency contraceptives we produced have
possessed a high ratio in domestic market share. Our enterprise is the greatest
scientific technology and manufacture base appointed by the National Birth Control
Committee and the SFDA.
Remarks
The workshops and the basic communal establishments for power supply, heat
supply, sewage treatment and etc are self-contained, which can guarantee the
implement of the project.
Tel +86 10 65761991 Contact Person Yin Xuying
Table on Introduction of InvestmentName Massive manufacture of oral liquid of biological preparation
Sponsor Enterprise Beijing ZiZhu Pharmaceutical Co., Ltd.
Construction Site SanjianfangDong Road, Chaoyang District, Beijing City
Total Investment USD4.2 millionInvestment With Fixed Assets USD2.6 million
Circulating Funds USD1.6million
IntentionsShares controlled by the Chinese side, and various forms of joint investments and
cooperation can be accepted.
Potentials for
Development
1.The production is a kind of high-tech product with high additional value. The
company has the patented technology of extracting active protein liquid from live
scorpions, which can solve the problems of poor extraction amount and low activity
of the production extracted by the traditional techniques, so the company has an
obvious technological superiority.
2.The product suits the increasingly demands of the health care market so it has a
nice market prospect.
Product Title Annual Output Functions
Oral liquid of
biological
preparation
1,000,000
bottles
The oral liquid of the production has
preferable protective effects such as
renovation and activation to the body
cells, as well as the efficacy of enhancing
the immunity.
Market
It has been two thousand years since dried body of scorpion being used as medicine
in China. The production of active protein extracted from living scorpion has been
proved by many studies to have the effects of activating cells, improving
microcirculation and enhancing human immunity, so it has a wide market prospect.
Nowadays, many people are in a sub-healthy status and have lower immunity
because of the increasing stress from their job and their social lives. There are about
70% of Chinese people in the status of sub-healthiness. The demand for the
production of the oral liquid in Chinese market will reach 13milllion bottles if there
are only 1% of the sub-healthy people taking one bottle of the production.
Techniques By means of the patented technology of extracting the active protein liquid from live
scorpions, we extract the active protein components from scorpions and prepare a
kind of liquid of certain proportion together with other base solutions, so the
extracted protein liquid not only has a high activity but also can be restored for a
long time.
Technological line: unfreezing protein liquids-separating liquidity protein-
preparation of semi-manufactured products- automatic pouring and packing- finished
products-package- quality inspection- putting in storage- leaving factory.
Construction
PeriodTwo years
Expected
Economic Benefit
Annual Sales
IncomeUSD27 million Total Annual Profit USD2.5 million
Annual After-Tax
ProfitUSD2 million
Introduction to
Enterprise
Total AssetsRMB¥580
millionRegistered Capital
RMB¥380
million
Number of
Employees975
Number of
Technicians329
Beijing ZiZhu Pharmaceutical Co., Ltd. occupies122,000m2, among which
construction area is 60,000 m2. In 1999, there are 7 workshops and 8 forms of
preparation passing the national GMP certification one-off. The company passed the
ISO9001 certification in 2001. And the company has four series of productions:
preparations for birth control, preparations for reproduction health, modern
ophthalmological preparations, and royal jelly and related preparations.
Remarks
The workshops and the basic communal establishments for power supply, heat
supply, sewage treatment and etc are self-contained, which can guarantee the
implement of the project.
Contact Telephone +86 10 65761991 Contact Persons Yin Chuying, Liu Yinxiang
Table on Introduction of InvestmentName Massive manufacture of raw materials of active protein liquid
Sponsor Enterprise Beijing ZiZhu Pharmaceutical Co., Ltd.
Construction Site Production base for raw materials of active protein liquid, ZiZhu biologic science
and technology Co., Ltd. (Shunping, Hebei Province)
Total Investment USD1.8 millionInvestment With Fixed Assets USD1.2 million
Circulating Funds USD0.6 million
IntentionsShare controlled by the Chinese side, and various forms of joint investments and
cooperation can be accepted.
Potentials for
Development
1.The production is a kind of high-tech product with high additional value. The
company has the patented technology of extracting active protein liquid from live
scorpions, which can solve the problems of poor extraction amount and low activity
of the production extracted by the traditional techniques, so the company has an
obvious technological superiority.
2.The product suits the increasingly demands of the health care market so it has a
nice market prospect.
Product Title Annual Output Functions
Raw materials of
active protein liquid 10,000,000ml
The oral liquid of the production has
preferable protection effects such as
repairing and activating the body cells, as
well as the efficacy of enhancing the
immunity.
Market
Both the officinal and dietary value of scorpion are rather great, and the quantity of
scorpion demanded around the world is more than 500 tons each year while the
annual production all over the world is only 400 tons, among which there are only
100 tons of the production manufactured in China. The most valuable part of
scorpion is the protein liquid extracted from the abdomen of scorpion. The output of
the protein liquid is poor because that the traditional method of extraction is rather
complicated and the protein liquid extracted by this means has a poor activity.
The productions manufactured after the implementing of this project are mostly for
sale abroad, and there is a nice and wide prospect in both the domestic and overseas
markets.
Techniques By means of the patented technology of extracting the active protein liquid from live
scorpions, the company has the technique of drawing out the protein liquid from the
living organisms directly, then extracting the most active components from the liquid
by low temperature separation process, and preparing the extracted components
together with other base solutions to form a kind of liquid in a certain proportion.
Technology line: living scorpions-extracting protein liquids- quick-freezing protein
liquids- cold storage of protein liquids.
Construction
PeriodTwo years
Expected
Economic Benefit
Annual Sales
IncomeUSD12 million Total Annual Profit USD1.1 million
Annual After-Tax
ProfitUSD750,000
Introduction to
Enterprise
Total AssetsRMB¥580
millionRegistered Capital
RMB¥380
million
Number of
Employees975
Number of
Technicians329
Beijing ZiZhu Pharmaceutical Co., Ltd. was established in 1969, and moved to
another place and reconstructed in 1995. It occupies122,000m2, among which
construction area is 60,000 m2. In 1999, there are 7 workshops and 8 forms of
preparation passing the national GMP certification one-off. The company passed the
ISO9001 certification in 2001. And the company has four series of productions:
preparations for birth control, preparations for reproduction health, modern
ophthalmological preparations, and royal jelly and related preparations.
RemarksConstruct a production base for raw materials of active protein liquid in ZiZhu
biologic science and technology Co., Ltd. in Shunping, HeBei Province.
Tel +86 10 65761991 Contact Person Yin Chuying, Liu Yinxiang
Table on Introduction of InvestmentName To introduce advanced equipment of recycled paper
Sponsor Enterprise Beijing No.7 Paper Mill
Construction Site 126 Binhe Road, Tongzhou District, Beijing
Total Investment USD46.98millionInvestment With Fixed Assets USD40.39million
Circulating Funds USD3.63million
Intentions
1. To cooperate with a partner with investment ability and experience to produce
the recycled paper to upgrade the mill’s technology.
2. The partner can hold the company. 3. Partner shall be able to plan overall the
settlement of the mill’s staffs.
Enterprise
Potentials for
Development
Enjoying the advantages of trademark, sales market, and preferential policies
concerned.
Product Title Newly Increased Output Volume
1 Copy paper 20000
2 hectograph paper 30000
3 Wrapping paper 80000
Market The world paper industry has a stable growth tendency. The global consumption in
2000 was about 325 million tons, and the production output, about 328 million tons.
The sale volume of paper industry of all countries amounts nearly to USD300
billion. It is estimated that the consumption of paper and paperboard will be
increasing annually by 2.5%~3% in the following years.
China, with the highest growth speed and annual increase rate up to 10.6%, has been
the second largest consumer and the third largest producer of the paper and
paperboard in the world. But the per capita consumption of China is only half of that
of the world, so there is great potential in the Chinese paper market. The Chinese
production output of the paper and paperboard in 2005 is estimated to increase up to
40 million tons and its annual consumption per capita, up to 34~38㎏. According to
consumer’s types the consumption will be as such, 35% used for packing; 43%, for
information transferring; 15%, as productive resources of industry and farming.
Newsprint will increase to 2.3 million tons and the printing and writing paper, up to
10 million tons and packing paper to 4.6 million tons.
The utilization of waste paper as renewable resources helps greatly to save the
timber and industrial chemicals. Recycle of one ton waste paper makes fine paper of
850㎏, and so saves timber of 3 M3, water of 100 M3, chemical raw material of 300
㎏, coal of 1.2 ton, electricity of 0.6 kWh. The global waste paper recycled in 2001
amounted to 130 million tons. Recycled rate of waste paper in America and some
European countries reaches 60%, but Chinese recovery rate is less than 24% and
availability is less than 35%. Hence it is urgent and necessary for China to produce
and use recycled paper.
Techniques
Using urban waste paper for raw materials, classification and selecting, pulping,
filtering and purifying (choice paper box patent), multilevel and multi-strand silica
removal, non-driven washing and dehydrating (patent), proteolysis with hydrogen
sulfide (patent). Refibred high-charged paper synchronized molding system,
condensing dehydration, after sizing treatment (static elimination), delustering,
winding
Construction
Period1. Recycled official business paper 2.5 years. 2. Industrial packing paper 2years.
Expected
Economic Benefit
Annual Sales
IncomeUSD53.57 million Total Annual Profit USD3.62 million
Annual After-Tax
ProfitUSD2.43 million
Introduction to
Enterprise
Total AssetsRMB¥170
millionRegistered Capital
RMB¥23.61
million
Number of
Employees1819
Number of
Technicians52
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1980s
Beijing No.7 Paper Mill, established in 1958 and located at 126 Binhe Road,
Tongzhou District, Beijing, lies 25 kilometers from Tian’anmen Square. It boasts the
superior geographic position and traffic conveniences. The Mill is a modernized
paper manufacturer equipped with solid technical forces, advanced production
facilities, and abundant managerial experience. Its main products consisting of
scientific cultural paper, industrial wrapping paper and everyday paper, each of
which has varieties of specifications and kinds ranging from18~520g/㎡ . “Snow
Lotus” Brand is distributed at home and abroad, enjoying high reputation. It was
named “International Elaborate Work” in 1997 by Eurasia Commercial Trade
Organization. The “Snow Lotus” trademark was awarded Beijing “Famous
Trademark” in 1998. the Mill is the first at home to introduce the environment-
friendly recycled office paper of the “ Queen of Flowers” brand
Remarks 1. Cooperated with Tongzhou District Environmental Protection Bureau to
transform and better its existing water treatment equipment and to utilize
stopwaters to produce by combining water network with Tongzhou District
Water Treatment Works.
2. The enterprise has now complete workshops and public facilities such as power,
water, heat and sewage systems, which will guarantee successful
implementation of this project.
Tel +86 10 61563101 Contact Person Zhang Baofa
Table on Introduction of InvestmentName Environmental protection company with joint investment
Sponsor Enterprise Beijing Jingcheng Environmental Protection Industry Development Co., Ltd.
Construction Site Jingcheng Environmental Protection Industry Base, Kangzhuang, Yanqing, Beijing
Total Investment USD5 million Investment With Fixed Assets USD2 million
Circulating Funds USD3 million
Intentions
Seek the world-known environmental protection company with mature project
design of household waste and dangerous waste (including medical waste and
dangerous industrial waste), construction and environment facility operation
experience and strength, to establish a joint venture of environment protection
technology, undertaking the project design of solid waste disposal, construction and
environment protection facility operation and key and core equipment manufacture.
The investment ratio about cashes, equipment and technology: the ratio of Chinese
company is 60% and the foreign company 40%.
Enterprise
Potentials for
Development
At present, the development of environmental protection industry is facing the
unprecedented great opportunity. The national environment legislation, strengthening
of implementation of laws, acceleration of urbanization, marketization and
industrialization of environment protection, Beijing’s success in bidding for 2008
Olympic Games, the western region development strategy and west-gas-to-the-east
project, all have a driving effect on the environment protection market and the
prospective and development of environment protection is promising. During the
Ninth Ten-Year Plan, 360 billion RMB was invested in environmental protection
and the environmental protection industry increased by 15% that is higher than the
growth rate GDP. It is estimated that the total production value of environmental
protection industry in China will reach 200 billion RMB by 2005, among which that
of environmental protection equipment will be 55 billion accounting for 27.5%, the
production value comprehensive resource use production value will be 95 billion
RMB, 47.5% and that of environment service will be 50 billion RMB, 25%. During
the Tenth Five-Year Plan, the growth rate of environment protection industry will
keep 15%.
Product Title
Newly
Increased
Output Volume
Functions
1Household waste
transfer kit5 sets
It includes collection, transfer,
classification, household waste, compost,
incineration, power generation and filling
in lands, the project design of
comprehensive operation system and
2 Household waste
incineration kit
3 sets
construction and key equipment
manufacture.
3
dangerous waste
comprehensive
disposal kit
8 sets
It mainly refers to harmless disposal of
medical waste, industrial waste and waste
organic liquid.
Market
With China’s rapid economic growth, environment issues gains more and more
concerns, the environment protection industry grows rapidly and the environment
protection equipment for city waste and dangerous waste has a great market capacity.
1. In 1999, original waste transferred in 668 cities in China
amounted to 120 million tons, the disposal rate of household waste is
about 60% and 40% of the waste is placed near the city without any
disposal. In the past years, the amount of waste placed there whithout
disposal has reached 6 billion tons and it occupies an area of 500 million
m2. In five years, the investment cost of waste disposal facility will
amount to 100 billion RMB and the operation cost will be 25 billion
RMB per year.
2. 47 large and medium-sized cities in China have been identified
as the first pilot cities of centralized medical waste disposal. 10 billion
RMB will be invested in Beijing, Shenyang, Wuhan, Guangzhou to build
centralized disposal center of dangerous waste.
Techniques
The household waste transfer equipment kit mainly uses screening, cracking,
selection and compressed transfer and reaches the advanced level inside. The
household waste incineration equipment kit mainly uses reciprocating grate
incinerator and the technique for electric generation and it reached the advanced
level inside. The dangerous waste comprehensive disposal equipment kit mainly uses
rotary kiln incinerator and it reaches the advanced level inside.
Construction
Period
It is estimated that established of the joint venture and technology improvement will
be finished and it will reach the production capacity designed by the end of 2003 and
production and sale will reach the scale designed by 2005.
Expected
Economic Benefit
Annual Sales
IncomeUSD38.8 million Total Annual Profit USD3.5 million
Annual After-Tax
ProfitUSD2.4 million
Introduction to
EnterpriseTotal Assets
RMB¥83.734
million Registered Capital RMB¥61 million
Number of
Employees260
Number of
Technicians60
Level of Advanced in Technological 1980s
Technology ChinaLevel of
Equipment1990s
Beijing Jingcheng Environmental Protection Industry Development Company
develops mainly in solid waste disposal equipment and kit project, sewage disposal
equipment and kit project, gas station equipment and kit project, environment
protection technology service and environment protection project investment. it
provides the customers with safe solution of environment protection issues in full
ranges, such as design, manufacture, equipment kit, installment and checkout and
operation
Remarks
The company has the workshop and good public facilities such as power supply,
water supply, heating and sewage disposal and it assures smooth operation of the
project.
Tel +86 10 67184910 Contact Person Hou Zibo
Table on Introduction of InvestmentName The membrane industrialization base
Sponsor Enterprise Beijing Institute of Film Machine
Construction Site 2 Tuanjiehubeilu, Chaoyang District, Beijing
Total Investment USD3.3 millionInvestment With Fixed Assets USD2.7 million
Circulating Funds USD0.6 million
Intentions
The foreign company invest USD5.54 million and the Chinese side brings in
equipment (valued at about USD700,000), technology and market resource. The tow
sides together establish a joint venture.
Enterprise
Potentials for
Development
It has been 30 years since Beijing Institute of Film Machine carried out the research,
development and production of optic membrane technology. It owns stable technical
basis and wide market resource. Its products include those of each optical spectrum
segment, such as ultraviolet light, visible light and near-infrared light. It can
manufacture interference filters of hard membranes and narrow-bands, interfere
ending filters, anti-reflection films, high-reflecting films, bandpass optical filters,
density filters and other kinds of optic membranes. Through introduction of capital
and use of current international advanced technology and devices, optic membrane
parts of international advanced level have been turned out in mass production and
optic membranes industrialization has been realized, which renders the products
highly competitive. No domestic enterprise deals with this project so far.
Product Title
Newly
Increased
Output Volume
Functions
1 Color wheels 100,000 The optic capacity, dynamic heat
resistance, chemistry, the mechanical
property and other aspects of the optic
membrane products made in the project
are better than those made traditionally.
At the same time, it applies automatic
production, thus improving consistency of
product quality and reducing costs.
2 Polarizing prisms 50,000
3Color selective
filters100,000
Market Photo electronic technology is the key one of future information technology
development and this industry will be the high-tech mainstay one in the 21 st century
with great market potential and rapid increasing value. At present, photo electronic
technology develops into a mature phrase. With the maturity and development of
liquid crystal display and DLP display, the projection product will be the rapidest
developing kind with largest increase rate and the demands in the market for optic
membrane parts will rise. As for the projector, the number of the parts needed each
year exceeds 8 million. Besides, the current market capacity has exceeded $1 billion
because the rapid market development of monitor technology, medical instruments
and devices, environmental protection monitors and other many fields, boost the
market of optic membranes all over the world.
Techniques
The project applies continual coating technology of highly effective magnetron
sputtering: sputter the niobium layer and the silicon layer and oxidize the membrane
layer with antozone in the oxidization room, and then the niobium pentoxide and the
silicon dioxide membrane layers are gotten and all kinds of membranes are made
with membrane thickness of power-time control. The membrane layer gotten is
advantageous in high density, weak absorption and hot stability and the product
capacity is obviously better than that made by the way of traditional vacuum
evaporation method. It can be manufactured in mass, automatic and continuous
production, thus remarkably improving its competitiveness.
Construction
Period
The workshop and production condition maintenance system are under construction
at present, and they will finish by May 2003. After the capital arriving, purchase of
new equipment will take half a year. It will take totally one year for installment,
checkout, production attempt and re-checkout.
Expected
Economic Benefit
Annual Sales
IncomeUSD6 million Total Annual Profit USD1.2 million
Annual After-Tax
ProfitUSD1.02 million
Introduction to
Enterprise
Total AssetsRMB¥27.04
million Registered Capital
RMB¥13.05
million
Number of
Employees161
Number of
Technicians92
Level of
Technology
Advanced in
China
Technological
Level of
Equipment
1990s
Beijing Institute of Film Machine is the research center of film making devices and
film audio and visual check manufacture and also the research center of micro
technology devices manufacture. After several years’ development, Beijing Institute
of Film Machine has the capacity of developing high-tech products combining
precisely mechanical, optic, electronic and computer technology. Now it mainly
undertakes the development, research and production of five major kinds of
products, such as film making devices, micro kit devices, precise measure
instruments, optic membrane technology products, photo processing and information
processing with computer, etc.
RemarksIt can ensure smooth operation of the project with the workshop and good public
facilities such as water supply, power supply, heating and sewage disposal.
Tel +86 10 65823854 Contact Person Zhao Futing