289-polyform_f2_datasheet.pdf

Upload: machevallie

Post on 17-Feb-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/23/2019 289-Polyform_F2_Datasheet.pdf

    1/1

    Polyform F2Heavy Duty Fender

    POLYFORM AS +47 70 17 25 50Tverrvegen 37 +47 70 14 76 36N-6020 lesund [email protected] www.polyform.no

    Product informationProudly made byThe Originator of

    Modern Plastic Buoys

    POLYFORM OF NORWAY

    The POLYFORM F2 is a supreme,seamless, heavy duty fender with anextra strong pre-made injectionmolded ropehold. The fender andthe rib-reinforced ropehold areunified through the in-housedeveloped and patentedPOLYMATIQ technology. The F-seriesare made from our unique blend ofhigh class tough, flexible vinyl

    materials. The fenders are resistantto all weather conditions. The F-series fenders are used all over theworld for fendering of pleasureboats, yachts, workboats, pilot boatsand the largest F-series fenders areused by national navies for ships upto 1500 ton d/w.

    Available in various colours.

    Polyform AS

    Polyform AS is a world leadingmanufacturer of buoys fenders andfloats, and the originator of themodern inflatable plastic buoy. Thecompany is registered in Norwayand situated in lesund at the north-western coast of Norway, and

    benefits from being located in oneof the world's most innovativemaritime environments.

    The product range of Polyform ASconsists of:Inflatable buoys and fenders made

    from soft Vinyl plastics.

    Purse Seine Floats, buoys and

    marina fenders made from BACELLclosed cell foam.

    Hard-shell buoys and pontoonfloats made from PE and filled with

    foam

    For all measurements, weights and other technical data specified in

    this data sheet, please allow for a deviation of not less than +/-5%.

    The illustration may deviate from the actual product.

    Article number F2Diameter (max recomended) 220 mmHeight (max) 610 mmWeight (nominal) 1,75 KgEye diameter for ropehold 28 mmValve type V10Gross volume 16 L

    Technical informationBreaking load for ropehold 1400 kp

    Buoy body material description

    Hardness, shore A 66Tensile strength 13,9 MPaElongation at break 587%Cold flex temperature -33CRecommended max temp. 40CTemp. not to be exceeded 50CSpecific gravity 1,17Body and Ropehold made from PVC.

    No use of CFC. Cadmium free.

    Made by Polymaticproduction technology

    V-10all plastic

    non-return valve