308e cr... · operation. the dozer loat ... the new monitoring control panel on the e series was...
TRANSCRIPT
308E Mini Hydraulic Excavator
Engine Weights
Engine Model Catreg C33 DI Turbo Operating Weight ndash Standard Stick 7160 kg
Net Power 2400 rpm 468 kW Operating Weight ndash Long Stick 7190 kg
Gross Power 2000 rpm 497 kW Operating Weight ndash Standard Stick with Blade 7720 kg
Bucket Operating Weight ndash Long Stick with Blade 7760 kg
Bucket Size ndash Standard Stick 038 m3
Bucket Size ndash Long Stick 031 m3
2
308E Features
High Performance Lower fuel consumption and higher fuel efficiency keeps you working all day
StandardPower dual mode offers the choice of lower fuel consumption or superior productivity
Smooth new intuitive flow sharing ldquoHigh Definition Hydraulicrdquo system provides the level of control demanded in any application
High Altitude and Cold Start Capability The 308E is equipped with the new Cat C33 DI Turbo engine with altitude capability to 2500 m and cold start capacity as low as ndash157 degrees
Versatility Optional long stick provides even greater reach
Contents Performance 4
Undercarriage 5
Operator Comfort 6
Monitoring System6
Engine 7
Serviceability and Customer Support 8
Specifi cations 10
Standard Equipment 12
Optional Equipment13
Notes 14
3
The Cat 308E Mini Hydraulic Excavator delivers superior performance and comfort while reducing your fuel consumption and operating costs The large spacious cab provides a comfortable work area Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency The standard tail swing design incorporates a counterweight that extends further back on the machine This provides leverage to create a stable work platform during lifting and digging The 308E sets the standard for conventional tail swing excavators in the eight-ton size class
Performance Powerful digging combined with smooth control
Hydraulics Smooth responsive hydraulics give the level of control demanded
by the customer in any application from fine grading and dozing
to backfi lling
Powerful bucket and stick digging forces combined with fast cycle
times result in world class productivity and performance
Two speed function improves job site maneuverability and can
be selected by an easily accessible foot switch on the control
console Dozer blade float function enables easy ground leveling
for landscaping and finish grade applications as well as more
efficient job site clean-up
Lift Capacity The new Cat E Series has industry leading lift capacity
matched with outstanding stability This provides the control
required to meet the diverse and continually changing needs
of the customer
Long Stick Option An optional long stick is available for the 308E for greater
reach in ditch clearing truck loading and other applications
4
Steel Track The standard 450 mm triple grouser steel tracks
provide optimum stability when lifting over the
side in demolition and heavy duty applications
Optional Dozer with Float Function The dozer function is pilot controlled from
inside the cab providing smooth proportional
operation The dozer float function is enabled
by pushing the lever fully forward into the
decent position Site clean up and backfilling
are easier as the operator does not have to
adjust the blade height during travel
Undercarriage Excellent stability
5
Operator Comfort Simple easy operation allows the operator to focus on production
Operator Station The operator environment provides the operator with a larger
cab and more ingress and egress room The clear flat floor
space allows the operator plenty of leg room An intuitive cab
layout with ergonomic joysticks standard spring suspension
seat and clear display panel makes for ease of operation
allowing the operator to focus on production
Monitoring System Maintenance and performance
The new monitoring control panel on the E Series was specifically designed by Caterpillar
for compact excavators This system helps you easily keep track of various maintenance
and performance parameters of the machine Maintenance and performance information
are all standard on the 308E
Performance Maintenance Menu The ldquoPerformancerdquo menu allows the operator to view measurements of various
system components
Maintenance Information Menu The ldquoMaintenance Infordquo menu allows the operator to view the current hours of use and the
recommended change intervals for various system components
6
Engine Clean quiet and efficient
Efficient Engine and Load Sensing Hydraulics The 308E uses a fuel efficient Cat C33 DI engine with a net power
rating of 468 kW It features a powerful load-sensing hydraulic
system with standard auxiliary hydraulic valve section to provide
excellent digging performance and smooth control Low noise
and vibration levels deliver comfortable operation The C33 engine
features a new direct injection fuel system that delivers optimum
fuel efficiency
High Ambient Cooling A high ambient temperature cooling system is standard
and features stacked coolers for a compact design
Cold Start Capability Cat C33 DI engine is equipped with cold start capacity
as low as ndash157 degrees
One Side Maintenance The Cat C33 engine offers superior maintenance convenience
with its large steel rear door and two large side doors for easy
access to all major components and service points
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
2
308E Features
High Performance Lower fuel consumption and higher fuel efficiency keeps you working all day
StandardPower dual mode offers the choice of lower fuel consumption or superior productivity
Smooth new intuitive flow sharing ldquoHigh Definition Hydraulicrdquo system provides the level of control demanded in any application
High Altitude and Cold Start Capability The 308E is equipped with the new Cat C33 DI Turbo engine with altitude capability to 2500 m and cold start capacity as low as ndash157 degrees
Versatility Optional long stick provides even greater reach
Contents Performance 4
Undercarriage 5
Operator Comfort 6
Monitoring System6
Engine 7
Serviceability and Customer Support 8
Specifi cations 10
Standard Equipment 12
Optional Equipment13
Notes 14
3
The Cat 308E Mini Hydraulic Excavator delivers superior performance and comfort while reducing your fuel consumption and operating costs The large spacious cab provides a comfortable work area Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency The standard tail swing design incorporates a counterweight that extends further back on the machine This provides leverage to create a stable work platform during lifting and digging The 308E sets the standard for conventional tail swing excavators in the eight-ton size class
Performance Powerful digging combined with smooth control
Hydraulics Smooth responsive hydraulics give the level of control demanded
by the customer in any application from fine grading and dozing
to backfi lling
Powerful bucket and stick digging forces combined with fast cycle
times result in world class productivity and performance
Two speed function improves job site maneuverability and can
be selected by an easily accessible foot switch on the control
console Dozer blade float function enables easy ground leveling
for landscaping and finish grade applications as well as more
efficient job site clean-up
Lift Capacity The new Cat E Series has industry leading lift capacity
matched with outstanding stability This provides the control
required to meet the diverse and continually changing needs
of the customer
Long Stick Option An optional long stick is available for the 308E for greater
reach in ditch clearing truck loading and other applications
4
Steel Track The standard 450 mm triple grouser steel tracks
provide optimum stability when lifting over the
side in demolition and heavy duty applications
Optional Dozer with Float Function The dozer function is pilot controlled from
inside the cab providing smooth proportional
operation The dozer float function is enabled
by pushing the lever fully forward into the
decent position Site clean up and backfilling
are easier as the operator does not have to
adjust the blade height during travel
Undercarriage Excellent stability
5
Operator Comfort Simple easy operation allows the operator to focus on production
Operator Station The operator environment provides the operator with a larger
cab and more ingress and egress room The clear flat floor
space allows the operator plenty of leg room An intuitive cab
layout with ergonomic joysticks standard spring suspension
seat and clear display panel makes for ease of operation
allowing the operator to focus on production
Monitoring System Maintenance and performance
The new monitoring control panel on the E Series was specifically designed by Caterpillar
for compact excavators This system helps you easily keep track of various maintenance
and performance parameters of the machine Maintenance and performance information
are all standard on the 308E
Performance Maintenance Menu The ldquoPerformancerdquo menu allows the operator to view measurements of various
system components
Maintenance Information Menu The ldquoMaintenance Infordquo menu allows the operator to view the current hours of use and the
recommended change intervals for various system components
6
Engine Clean quiet and efficient
Efficient Engine and Load Sensing Hydraulics The 308E uses a fuel efficient Cat C33 DI engine with a net power
rating of 468 kW It features a powerful load-sensing hydraulic
system with standard auxiliary hydraulic valve section to provide
excellent digging performance and smooth control Low noise
and vibration levels deliver comfortable operation The C33 engine
features a new direct injection fuel system that delivers optimum
fuel efficiency
High Ambient Cooling A high ambient temperature cooling system is standard
and features stacked coolers for a compact design
Cold Start Capability Cat C33 DI engine is equipped with cold start capacity
as low as ndash157 degrees
One Side Maintenance The Cat C33 engine offers superior maintenance convenience
with its large steel rear door and two large side doors for easy
access to all major components and service points
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
3
The Cat 308E Mini Hydraulic Excavator delivers superior performance and comfort while reducing your fuel consumption and operating costs The large spacious cab provides a comfortable work area Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency The standard tail swing design incorporates a counterweight that extends further back on the machine This provides leverage to create a stable work platform during lifting and digging The 308E sets the standard for conventional tail swing excavators in the eight-ton size class
Performance Powerful digging combined with smooth control
Hydraulics Smooth responsive hydraulics give the level of control demanded
by the customer in any application from fine grading and dozing
to backfi lling
Powerful bucket and stick digging forces combined with fast cycle
times result in world class productivity and performance
Two speed function improves job site maneuverability and can
be selected by an easily accessible foot switch on the control
console Dozer blade float function enables easy ground leveling
for landscaping and finish grade applications as well as more
efficient job site clean-up
Lift Capacity The new Cat E Series has industry leading lift capacity
matched with outstanding stability This provides the control
required to meet the diverse and continually changing needs
of the customer
Long Stick Option An optional long stick is available for the 308E for greater
reach in ditch clearing truck loading and other applications
4
Steel Track The standard 450 mm triple grouser steel tracks
provide optimum stability when lifting over the
side in demolition and heavy duty applications
Optional Dozer with Float Function The dozer function is pilot controlled from
inside the cab providing smooth proportional
operation The dozer float function is enabled
by pushing the lever fully forward into the
decent position Site clean up and backfilling
are easier as the operator does not have to
adjust the blade height during travel
Undercarriage Excellent stability
5
Operator Comfort Simple easy operation allows the operator to focus on production
Operator Station The operator environment provides the operator with a larger
cab and more ingress and egress room The clear flat floor
space allows the operator plenty of leg room An intuitive cab
layout with ergonomic joysticks standard spring suspension
seat and clear display panel makes for ease of operation
allowing the operator to focus on production
Monitoring System Maintenance and performance
The new monitoring control panel on the E Series was specifically designed by Caterpillar
for compact excavators This system helps you easily keep track of various maintenance
and performance parameters of the machine Maintenance and performance information
are all standard on the 308E
Performance Maintenance Menu The ldquoPerformancerdquo menu allows the operator to view measurements of various
system components
Maintenance Information Menu The ldquoMaintenance Infordquo menu allows the operator to view the current hours of use and the
recommended change intervals for various system components
6
Engine Clean quiet and efficient
Efficient Engine and Load Sensing Hydraulics The 308E uses a fuel efficient Cat C33 DI engine with a net power
rating of 468 kW It features a powerful load-sensing hydraulic
system with standard auxiliary hydraulic valve section to provide
excellent digging performance and smooth control Low noise
and vibration levels deliver comfortable operation The C33 engine
features a new direct injection fuel system that delivers optimum
fuel efficiency
High Ambient Cooling A high ambient temperature cooling system is standard
and features stacked coolers for a compact design
Cold Start Capability Cat C33 DI engine is equipped with cold start capacity
as low as ndash157 degrees
One Side Maintenance The Cat C33 engine offers superior maintenance convenience
with its large steel rear door and two large side doors for easy
access to all major components and service points
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
Performance Powerful digging combined with smooth control
Hydraulics Smooth responsive hydraulics give the level of control demanded
by the customer in any application from fine grading and dozing
to backfi lling
Powerful bucket and stick digging forces combined with fast cycle
times result in world class productivity and performance
Two speed function improves job site maneuverability and can
be selected by an easily accessible foot switch on the control
console Dozer blade float function enables easy ground leveling
for landscaping and finish grade applications as well as more
efficient job site clean-up
Lift Capacity The new Cat E Series has industry leading lift capacity
matched with outstanding stability This provides the control
required to meet the diverse and continually changing needs
of the customer
Long Stick Option An optional long stick is available for the 308E for greater
reach in ditch clearing truck loading and other applications
4
Steel Track The standard 450 mm triple grouser steel tracks
provide optimum stability when lifting over the
side in demolition and heavy duty applications
Optional Dozer with Float Function The dozer function is pilot controlled from
inside the cab providing smooth proportional
operation The dozer float function is enabled
by pushing the lever fully forward into the
decent position Site clean up and backfilling
are easier as the operator does not have to
adjust the blade height during travel
Undercarriage Excellent stability
5
Operator Comfort Simple easy operation allows the operator to focus on production
Operator Station The operator environment provides the operator with a larger
cab and more ingress and egress room The clear flat floor
space allows the operator plenty of leg room An intuitive cab
layout with ergonomic joysticks standard spring suspension
seat and clear display panel makes for ease of operation
allowing the operator to focus on production
Monitoring System Maintenance and performance
The new monitoring control panel on the E Series was specifically designed by Caterpillar
for compact excavators This system helps you easily keep track of various maintenance
and performance parameters of the machine Maintenance and performance information
are all standard on the 308E
Performance Maintenance Menu The ldquoPerformancerdquo menu allows the operator to view measurements of various
system components
Maintenance Information Menu The ldquoMaintenance Infordquo menu allows the operator to view the current hours of use and the
recommended change intervals for various system components
6
Engine Clean quiet and efficient
Efficient Engine and Load Sensing Hydraulics The 308E uses a fuel efficient Cat C33 DI engine with a net power
rating of 468 kW It features a powerful load-sensing hydraulic
system with standard auxiliary hydraulic valve section to provide
excellent digging performance and smooth control Low noise
and vibration levels deliver comfortable operation The C33 engine
features a new direct injection fuel system that delivers optimum
fuel efficiency
High Ambient Cooling A high ambient temperature cooling system is standard
and features stacked coolers for a compact design
Cold Start Capability Cat C33 DI engine is equipped with cold start capacity
as low as ndash157 degrees
One Side Maintenance The Cat C33 engine offers superior maintenance convenience
with its large steel rear door and two large side doors for easy
access to all major components and service points
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
Steel Track The standard 450 mm triple grouser steel tracks
provide optimum stability when lifting over the
side in demolition and heavy duty applications
Optional Dozer with Float Function The dozer function is pilot controlled from
inside the cab providing smooth proportional
operation The dozer float function is enabled
by pushing the lever fully forward into the
decent position Site clean up and backfilling
are easier as the operator does not have to
adjust the blade height during travel
Undercarriage Excellent stability
5
Operator Comfort Simple easy operation allows the operator to focus on production
Operator Station The operator environment provides the operator with a larger
cab and more ingress and egress room The clear flat floor
space allows the operator plenty of leg room An intuitive cab
layout with ergonomic joysticks standard spring suspension
seat and clear display panel makes for ease of operation
allowing the operator to focus on production
Monitoring System Maintenance and performance
The new monitoring control panel on the E Series was specifically designed by Caterpillar
for compact excavators This system helps you easily keep track of various maintenance
and performance parameters of the machine Maintenance and performance information
are all standard on the 308E
Performance Maintenance Menu The ldquoPerformancerdquo menu allows the operator to view measurements of various
system components
Maintenance Information Menu The ldquoMaintenance Infordquo menu allows the operator to view the current hours of use and the
recommended change intervals for various system components
6
Engine Clean quiet and efficient
Efficient Engine and Load Sensing Hydraulics The 308E uses a fuel efficient Cat C33 DI engine with a net power
rating of 468 kW It features a powerful load-sensing hydraulic
system with standard auxiliary hydraulic valve section to provide
excellent digging performance and smooth control Low noise
and vibration levels deliver comfortable operation The C33 engine
features a new direct injection fuel system that delivers optimum
fuel efficiency
High Ambient Cooling A high ambient temperature cooling system is standard
and features stacked coolers for a compact design
Cold Start Capability Cat C33 DI engine is equipped with cold start capacity
as low as ndash157 degrees
One Side Maintenance The Cat C33 engine offers superior maintenance convenience
with its large steel rear door and two large side doors for easy
access to all major components and service points
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
Operator Comfort Simple easy operation allows the operator to focus on production
Operator Station The operator environment provides the operator with a larger
cab and more ingress and egress room The clear flat floor
space allows the operator plenty of leg room An intuitive cab
layout with ergonomic joysticks standard spring suspension
seat and clear display panel makes for ease of operation
allowing the operator to focus on production
Monitoring System Maintenance and performance
The new monitoring control panel on the E Series was specifically designed by Caterpillar
for compact excavators This system helps you easily keep track of various maintenance
and performance parameters of the machine Maintenance and performance information
are all standard on the 308E
Performance Maintenance Menu The ldquoPerformancerdquo menu allows the operator to view measurements of various
system components
Maintenance Information Menu The ldquoMaintenance Infordquo menu allows the operator to view the current hours of use and the
recommended change intervals for various system components
6
Engine Clean quiet and efficient
Efficient Engine and Load Sensing Hydraulics The 308E uses a fuel efficient Cat C33 DI engine with a net power
rating of 468 kW It features a powerful load-sensing hydraulic
system with standard auxiliary hydraulic valve section to provide
excellent digging performance and smooth control Low noise
and vibration levels deliver comfortable operation The C33 engine
features a new direct injection fuel system that delivers optimum
fuel efficiency
High Ambient Cooling A high ambient temperature cooling system is standard
and features stacked coolers for a compact design
Cold Start Capability Cat C33 DI engine is equipped with cold start capacity
as low as ndash157 degrees
One Side Maintenance The Cat C33 engine offers superior maintenance convenience
with its large steel rear door and two large side doors for easy
access to all major components and service points
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
Engine Clean quiet and efficient
Efficient Engine and Load Sensing Hydraulics The 308E uses a fuel efficient Cat C33 DI engine with a net power
rating of 468 kW It features a powerful load-sensing hydraulic
system with standard auxiliary hydraulic valve section to provide
excellent digging performance and smooth control Low noise
and vibration levels deliver comfortable operation The C33 engine
features a new direct injection fuel system that delivers optimum
fuel efficiency
High Ambient Cooling A high ambient temperature cooling system is standard
and features stacked coolers for a compact design
Cold Start Capability Cat C33 DI engine is equipped with cold start capacity
as low as ndash157 degrees
One Side Maintenance The Cat C33 engine offers superior maintenance convenience
with its large steel rear door and two large side doors for easy
access to all major components and service points
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working
8
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
Excellent Service Access and ldquoOne Side Maintenancerdquo Engine Daily checks and regular service points including fuel and hydraulic oil fill are
easily reached via the large steel rear door and two large side doors The main
hydraulic valve and lines are also easily reached through a removable floor
plate and side panels
The new Cat C33 engine features ldquoone side maintenancerdquo to offer superior
maintenance convenience The machine has durable steel body panels all
around offering good resistance to impact damage and helping to maintain
the machinersquos appearance and value
SmiddotOmiddotSSM oil sampling valve allows easy sampling of the hydraulic fluid for
preventative maintenance
Customer Support ndash Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision
and everything after
bull Financing packages are flexible to meet your needs
bull Unmatched parts availability keeps you working
bull Make comparisons of machines with estimates of component life
preventative maintenance and cost of production
bull For more information on Cat products dealer services and industry
solutions visit wwwcatcom
9
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
308E Mini Hydraulic Excavator Specifications
Engine Travel System
Engine Model Cat C33 DI Turbo Travel Speed ndash High 51 kmh
Net Power 2400 rpm 468 kW Travel Speed ndash Low 32 kmh
Gross Power 2000 rpm 497 kW Maximum Drawbar Pull 569 kN
bull Meets US EPA Interim Tier 2 emission requirements Gradeability (maximum) ndash High 30 Degrees bull Net power rating per ISO 9249 and SAE J1349 bull Gross power rating per SAE J1995 Electrical System
Weights Type
Operating Weight with Standard Stick 7160 kg bull 60-amp alternator bull 12-volt heavy-duty batteries
Operating Weight with Standard Stick 7720 kg and Blade Service Refill Capacities Operating Weight with Long Stick
Operating Weight with Long Stick and Blade
7190 kg
7760 kg Cooling System
Engine Oil
121 L
112 L
Weight with cab 37 m boom 182 m stick 038 m3 bucket (945 mm width) and 450 mm shoes
Fuel Tank
Hydraulic Tank
135 L
51 L
Weight with cab 37 m boom 221 m stick 031 m3 bucket Hydraulic System 94 L (820 mm width) and 450 mm shoes
Front Engine Dimensions
Boom Length 3700 mm Bore 94 mm Standard Stick Length 1820 mm Stroke 120 mm Long Stick Length 2210 mm Displacement 33 L
Blade Swing System
Width 2300 mm Machine Swing Speed 108 min-1 Height 450 mm Swing Torque 163 kNmiddotm Dig Depth 350 mm
Hydraulic System Lift Height 390 mm
Load Sensing Hydraulics with Variable Displacement Piston Pump Track
Pump Flow at 2000 rpm 147 Lmin Track Shoe Width (standard) 450 mm Operating Pressure ndash Equipment 28 000 kPa Track Length 2910 mm Operating Pressure ndash Travel 28 000 kPa Ground Pressure 305 kPa Operating Pressure ndash Swing 24 000 kPa Number of Track Rollers (each side) 5 Digging Force ndash Stick (standard) 389 kN Number of Carrier Rollers (each side) 1 Digging Force ndash Bucket 571 kN
10
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5
6
1117
129 7 2 1810 13
14
1
16
15
3 4
Stick Standard Long Stick Standard Long
1 Maximum Digging Depth 4210 mm 4600 mm 10 Blade Down 350 mm mdash
2 Length of Track on Ground 2280 mm mdash 11 Cab Height 2560 mm mdash
3 Maximum Reach at Ground Line 6290 mm 6660 mm 12 Ground Clearance Counterweight 750 mm mdash
4 Maximum Reach of Working Range 6420 mm 6780 mm 13 Track Length 2910 mm mdash
5 Maximum Cutting Height 7330 mm 7610 mm 14 Shipping Length 6080 mm 6030 mm
6 Maximum Dump Height 5300 mm 5590 mm 15 Track Shoe Width 450 mm mdash
7 Ground Clearance Frame 370 mm mdash 16 Shipping Width 2320 mm 2320 mm
8 Tail Swing Radius 1750 mm 1750 mm 17 Shipping Height 2700 mm 3100 mm
9 Blade Up 390 mm mdash 18 Blade Height 450 mm mdash
Lift Capacities at Ground Level
Lift Point Radius 3000 mm Maximum Radius
Lift Point Height Front Side Front Side
Ground Line kg 3100 2400 1100 900
ndash30 m kg 2100 2100 1600 1600
The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567 2007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
11
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
308E Standard Equipment
Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
bull Diesel engine C33 with electrical governor bull Two speed travel with manual shift bull Cat one key security system bull Door locks and cap locks bull Signalingwarning horn bull GPS ready bull Muffler with cover bull Radial seal air filter double element bull Stacked cooling package bull Auxiliary hydraulic valve (one) bull Straight line travel bull Accumulator
bull Cab ndash Operable front windshield with
assist device ndash Removable lower windshield with
in cab storage bracket ndash Windshield wiper and washer ndash Interior lighting ndash Coat hook ndash Ashtray ndash Radio mounting (meet DIN size) ndash Two stereo speakers ndash Antenna ndash Cup holder ndash Storage pocket ndash Mounting for front and top guard
(mounting boss)
bull Color LCD monitor bull Hour meter bull Retractable seat belt (50 mm width) bull Hydraulic activation control lever
(lock out) for all controls bull Two travel control hand levers bull Capability to install one additional pedal
for auxiliary hydraulic control bull Seat with suspension bull 450 mm triple grouser track shoes
with holes (for rubber pad) bull Towing eye on base frame bull Rearview mirror mounted on right hand
side of upper frame
12
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
308E Optional Equipment
Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Blade bull Lines Group ndash PTO auxiliary hydraulic bull Cab front guard bull Long stick lines from boom foot to stick stop valves bull Drain-oil pan (ecology) bull Lighting ndash cab bull Travel alarm bull Heater water jacket bull Control ndash PTO auxiliary hydraulic lines bull Heavy duty swivel guard
from main auxiliary valve to boom foot plus auxiliary control pedal
13
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ7268 (05-2014) (GN1)
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
EngineEngine Model Cat C33BRated Net Power 2400 rpm ISO 9249EEC 801269 485 kW 65 hpGross Power ISO 14396 497 kW 666 hpBore 94 mm 37 inStroke 120 mm 47 inDisplacement 333 L 2032 in3
Meets US EPA Tier 4 Final and EU Stage IIIB emission standards
WeightsOperating Weight with Cab 8400 kg 18519 lb
bull Weight with rubber tracks bucket operator (75 kg165 lb) full fuel and auxiliary lines
bull Weight varies depending on machine configuration
Swing SystemMachine Swing Speed 11 rpmBoom Swing ndash Left 60degBoom Swing ndash Right 50deg
bull Automatic swing break spring applied hydraulic release
Travel SystemTravel Speed High 51 kmh 317 mph Low 28 kmh 174 mphMaximum Traction Force High Speed 645 kN 14500 lb Low Speed 374 kN 8408 lbGradeability (maximum) 30degGround Pressure 363 kPa 526 psi
bull Each track is driven by one independent 2-speed motorbull Drive modules are integrated into the roller frame for total protectionbull Straight line travel when tracking and operating the front linkage
simultaneously
Service Refill CapacitiesFuel Tank 125 L 33 galCooling System 14 L 37 galEngine Oil 112 L 30 galHydraulic Tank 82 L 217 galHydraulic System 94 L 248 gal
Hydraulic SystemPump Flow at 2000 rpm 150 Lmin 396 galminOperating Pressure ndash Equipment 28 000 kPa 4061 psiOperating Pressure ndash Travel 28 000 kPa 4061 psiOperating Pressure ndash Swing 24 000 kPa 3481 psiAuxiliary Circuit ndash Primary (186 bar2734 psi) 128 Lmin 338 galminAuxiliary Circuit ndash Secondary (174 bar2524 psi) 64 Lmin 169 galminDigging Force ndash Stick (standard) 401 kN 9015 lbDigging Force ndash Stick (long) 351 kN 7891 lbDigging Force ndash Bucket 602 kN 13534 lb
bull Load sensing hydraulics with variable displacement piston pump
BladeWidth 2320 mm 913 inHeight 450 mm 177 inDig Depth 360 mm 142 in Lift Height 380 mm 150 in
CabDynamic Operator Sound Pressure 70 dB(A) ISO 6396Average Exterior Sound Pressure 99 dB(A) ISO 6395 ndash
Dynamic Test
Operating SpecificationsStick Length ndash Standard 1670 mm 5 ft 6 inStick Length ndash Long 2210 mm 7 ft 3 inMachine Overhang 2794 mm 11 inMachine Overhang with Counterweight 406 mm 16 inCounterweight 251 kg 551 lb
Specifications
Catreg
308E2 CR SBMINI HYDRAULIC EXCAVATOR
WITH SWING BOOM
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
Dimensions
Lift Capacities at Ground Level
Standard Stick Long Stick
1 4150 mm 137 4690 mm 155
2 2980 mm 99 3550 mm 118
3 6820 mm 229 7350 mm 241
4 7020 mm 230 7540 mm 249
5 6640 mm 219 6990 mm 2211
6 4670 mm 154 5010 mm 165
7 2800 mm 92 3280 mm 109
8 1450 mm 49 1450 mm 49
9 420 mm 15 420 mm 15
10 320 mm 11 320 mm 11
Standard Stick Long Stick
11 2280 mm 76 2230 mm 74
12 2550 mm 84 2550 mm 84
13 735 mm 25 735 mm 25
14 2903 mm 96 2903 mm 96
15 6380 mm 2011 6340 mm 2010
16 1010 mm 34 1010 mm 34
17 635 mm 21 635 mm 21
18 450 mm 16 450 mm 16
19 2320 mm 77 2320 mm 77
Lift Point Radius 4000 mm (131) 6050 mm (1910)
Front Side Front Side
Blade Down kg 3650 1710 1880 920lb 8046 3770 4144 2028
Blade Up kg 1840 1530 970 820lb 4056 3373 2138 1808
The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 105672007 and they do not exceed 87 of hydraulic lifting capacity or 75 of tipping capacity The excavator bucket weight is not included on this chart Lifting capacities are for standard stick
19
18
17
16
1514
1211
13
109
7 8
5
6
12
34
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab ROPS ISO 12117-2 with radio ready mounting AC heaterdefroster interior light and windshield wiperwasher Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20 fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in US only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick ldquoThumb readyrdquo sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
AMFM radio with auxiliary input (optional in Europe standard for all other regions) Block heater Boom and stick check valve Boom mounted light ndash right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications ndash 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the US) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options
bull Rubber belt ndash 450 mm (18 in)bull Steel track ndash 450 mm (18 in)bull Steel track ndash 600 mm (24 in)bull Steel track with rubber pads ndash 450 mm (18 in)
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
AEHQ7043 (04-13)For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2013 Caterpillar IncAll Rights ReservedPrinted in USA
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission