4-shelf shelving unit - chrome · 4-shelf shelving unit - chrome contents: make sure that the...
TRANSCRIPT
4-Shelf Shelving Unit - ChromeUnité De Rayonnage à 4 Étagères - Chromée
Regal mit 4 Regalböden - Verchromt
Scaffale a 4 Ripiani - Cromao
Módulo De 4 Estantes - Cromo
4段 シェルフユニット、4层置物架 - 铬合金
B00NUS53CY
クローム
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
English ........................................... 3
Français ....................................... 15
Deutsch ........................................ 27
Italiano ......................................... 39
Español ........................................ 51
日本語 ........................................... 63
中文 .............................................. 75
3
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
4-Shelf Shelving Unit - ChromeContents:Make sure that the package contains the following parts:
Part Qty.
A 4
B 4
C 4
D 4
E TOP 16
F 12
G
1
Note: Discard the protective covers F . These are used to separate the shelves for shipping purposes.
Welcome Guide • English
G1-1pc
G2-1pc
G3-2pcs
G4-2pcs G5-1pc
FURNITURE TIPPING RESTRAINT
4
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
AssemblyStep 1:Setting Up the Product
TOP
TOP
TOP
TOP
TOP
A F F
C E
D
E
• Remove the protective covers F from the shelves A and dispose of them.• Screw one foot D onto the bottom of each lower pole C in a counter-clockwise direction.• Attach one half of the plastic sleeve E to each lower pole. Then attach the other
half of the plastic sleeve to each lower pole, so both halves are connected with each other. The arrow above the TOP marks on the plastic sleeves should point upwards. Four plastic sleeves are necessary to support one shelf.
5
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
AssemblyStep 2:Setting Up the Product
E
E
A
C
• Put the first shelf A onto the poles C and lower it down until it rests on the plastic sleeves E .
• Attach another set of plastic sleeves to each lower pole for the second shelf from the bottom.
6
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
AssemblyStep 3:Setting Up the Product
C
E
A
• Put the next shelf A onto the poles C and lower it down until it rests on the plastic sleeves E .
7
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
AssemblyStep 4:Setting Up the Product
B
B
C
C
• Screw the upper poles B onto the lower poles C in a clockwise direction.
8
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
AssemblyStep 5:Setting Up the Product
B
E
• Attach one set of plastic sleeves E to the upper poles B .
9
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
AssemblyStep 6:Setting Up the Product
E
E
B
A
• Put the next shelf A onto the poles B and lower it down until it rests on the plastic sleeves E .
• Attach another set of plastic sleeves to the upper poles.
10
AssemblyStep 7:Setting Up the Product
AE
B
G
• Put the last shelf A onto the poles B and lower it down until it rests on the plastic sleeves E . Place cardboard over the corners of each shelf and gently tap down with a rubber mallet (or similar tool) until the shelf is level.
• To improve stability (if needed), drill two tiny holes (Ø 4 mm) into the wall and insert the dowels G . Secure the shelf to the wall by installing the Furniture Tipping
Restraint hardware. The full instructions are inside the hardware bags.
.
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文
the instructions
Wall
Cleaning and Maintenance• Wipe with a dry cloth as needed to remove dust and dirt.• Avoid contact with corrosive substances like acids, alkaline or similar
substances.
Safety and Compliance• Warning: Do not let children climb on or play with the unit.
• Handle with care.
• For ease and efficiency, the product should be assembled by two adults.
• Regularly check if all screw connections are tight and if all shelves are attached
in a stable way.
• To avoid scratching the floor, assemble the shelving unit on a soft surface such
as a carpet.• Warning: Make sure not to drill into water or electricity lines when securing the
shelving unit on the wall. Use a wire tracer and/or a water pipe finder if necessary.
• Load the unit evenly and place the heaviest items on the lower shelves.
Maximum Load US Standard Metric
Shelving unit 1400 lbs 635 kg
One single shelf 350 lbs 159 kg
11
Eng
lishFrançais
Deutsch
ItalianoEsp
añol日本語
中文
Warranty InformationTo obtain a copy of the warranty for this product:
Visit amazon.com/AmazonBasics/Warranty
— or —
Contact Customer Service at 1-866-216-1072
12
Eng
lishFrançais
Deutsch
ItalianoEsp
añol日本語
中文
FeedbackLove it? Hate it?Let us know with a customer review.
AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.
Please visit: amazon.com/review/review-your-purchases#
For further services:
Visit amazon.com/gp/help/customer/contact-us
— or —
Contact Customer Service at 1-866-216-1072
13
Eng
lishF
rançaisD
eutschItaliano
Esp
añol日本語
中文