鴻海公司常用英語

15
公公公公 -----公公公公公 :公公公公 Hon Hai 鴻鴻 CMM Component module move 鴻鴻鴻鴻鴻鴻 CEM Contract Manufaction service 鴻鴻鴻鴻鴻鴻 IBSC Internet Business Solution Center 鴻鴻鴻鴻鴻鴻鴻鴻鴻 PCEG Personal Computer Enclosure group FOXTEQCCBG Connector&cable business group CPBG Competition business group ESBG Enterprise system business group 鴻鴻鴻鴻鴻鴻 SABG system assembly business group 鴻鴻鴻鴻鴻鴻鴻 NWE Net Work Enclosure NSE Network system enclosure NSG Network system group NFE Network flexible enclosure Foxcavity = HZ = Hong Zhun 鴻鴻 Stamping tool shop I 鴻鴻 Stamping tool shop II 鴻鴻鴻鴻 Prototype workshop 鴻鴻鴻鴻 Steel factory 鴻鴻鴻 PCE molding tooling workshop PCE 鴻鴻鴻 Hua Nan test and measurement center 鴻鴻鴻鴻鴻鴻 MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 鴻鴻鴻 MGE Alloy magnesium alloy enclosure 鴻鴻鴻 Engineer standard 鴻鴻 Document center (database center)鴻鴻鴻鴻 Design Center 鴻鴻鴻鴻 Painting 鴻鴻(鴻) Assembly 鴻鴻(鴻) Stamping 鴻鴻(鴻) Education and Training 鴻鴻鴻鴻 proposal improvement/creative suggestion 鴻鴻鴻鴻 Technological exchange and study 鴻鴻鴻鴻鴻鴻鴻 1

Upload: wenic99

Post on 19-Aug-2014

576 views

Category:

Documents


15 download

TRANSCRIPT

Page 1: 鴻海公司常用英語

公司英語 -----教育訓練部一:常用術語Hon Hai 鴻海CMM Component module move 機動元件整合CEM Contract Manufaction service 合約委托代工IBSC Internet Business Solution Center 國際互聯網應用中心PCEG Personal Computer Enclosure group 個人電腦外設事業群(FOXTEQ)CCBG Connector&cable business groupCPBG Competition business groupESBG Enterprise system business group 鴻富錦事業群SABG system assembly business group 系統組裝事業群NWE Net Work EnclosureNSE Network system enclosureNSG Network system groupNFE Network flexible enclosureFoxcavity = HZ = Hong Zhun 鴻準Stamping tool shop I 沖模一廠Stamping tool shop II 沖模二廠Prototype workshop 樣品中心Steel factory 裁剪廠PCE molding tooling workshop PCE塑模廠Hua Nan test and measurement center 華南檢測中心MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 明塑厂 MGE Alloy magnesium alloy enclosure 鎂合金 Engineer standard 工標Document center (database center)資料中心Design Center 設計中心Painting 烤漆(廠) Assembly組裝(廠)Stamping 沖壓(廠)Education and Training教育訓練proposal improvement/creative suggestion提案改善Technological exchange and study 技術交流研習會

1

Page 2: 鴻海公司常用英語

Technology and Development Committee 技術發展委員會BS Brain Storming 腦力激蕩QCC Quality Control Circle 品質圈PDCA Plan Do Check Action 計劃 執行 檢查 總結DCC delivery control center 交貨管制中心3CComputer 電腦類產品Consumer electronics 消費性電子產品Communication 通訊類產品

Core value(核心价值)Love 愛心Confidence 信心Decision 決心

Corporate culture(公司文化)Integration 融合Responsibility 責任Progress 進步3T STRATEGYTime to market 及時切入生產Time to volume 及時大量生產Time to money 及時大量交貨

FOUR CONTROL YSTEM 四大管制系統Engineering control system 工程管制系統Quality control system品質管制系統Manufacturing control system生產管制系統Management control system經營管制系統7SClassification整理(sorting, organization)-seiriRegulation整頓(arrangement, tidiness)-seitonCleanliness清掃(sweeping, purity)-seisoConservation清洁(cleaning, cleanliness)-seiktsuCulture教養(discipline)-shitsuke

2

Page 3: 鴻海公司常用英語

Save 節約Safety安全

二:英文縮寫 品質人員名稱類QC quality control 品質管理人員FQC final quality control 終點品質管制人員IPQC in process quality control 制程中的品質管制人員OQC output quality control 最終出貨品質管制人員IQC incoming quality control 進料品質管制人員TQC total quality control 全面質量管理POC passage quality control 段檢人員QA quality assurance 質量保證人員OQA output quality assurance 出貨質量保證人員QE quality engineering 品質工程人員品質保證類FAI first article inspection 新品首件檢查FAA first article assurance 首件確認CP capability index 能力指數CPK capability process index 模具製程能力參數SSQA standardized supplier quality audit 合格供應商品質評估FMEA failure model effectiveness analysis 失效模式分析FQC運作類AQL Acceptable Quality Level 運作類允收品質水準S/S Sample size 抽樣檢驗樣本大小ACC Accept 允收REE Reject 拒收CR Critical 極嚴重的MAJ Major 主要的MIN Minor 輕微的Q/R/S Quality/Reliability/Service 品質/可靠度/服務P/N Part Number 料號L/N Lot Number 批號AOD Accept On Deviation 特采UAI Use As It 特采FPIR First Piece Inspection Report 首件檢查報告PPM Percent Per Million 百萬分之一

3

Page 4: 鴻海公司常用英語

制程統計品管專類SPC Statistical Process Control 統計製程管制SQC Statistical Quality Control 統計品質管制GRR Gauge Reproductiveness & Repeatability 量具之再制性及重測性判斷量可靠與否DIM Dimension 尺寸DIA Diameter 直徑N Number 樣品數其它品質術語類QIT Quality Improvement Team 品質改善小組ZD Zero Defect 零缺點QI Quality Improvement 品質改善QP Quality Policy 目標方針TQM Total Quality Management 全面品質管理RMA Return Material Audit 退料認可7QCTools 7 Quality Control Tools 品管七大手法通用之件類ECN Engineering Change Notice 工程變更通知(供應商)ECO Engineering Change Order 工程改動要求(客戶)PCN Process Change Notice 工序改動通知PMP Product Management Plan 生產管制計劃SIP Standard Inspection Procedure 製程檢驗標準程序SOP Standard Operation Procedure 製造作業規範IS Inspection Specification 成品檢驗規範BOM Bill Of Material 物料清單PS Package Specification 包裝規範SPEC Specification 規格DWG Drawing 圖面系統文件類ES Engineering Standard 工程標準CGOO China General PCE龍華廠文件IWS International Workman Standard 工藝標準ISO International Standard Organization 國際標準化組織GS General Specification 一般規格部類PMC Production & Material Control 生產和物料控制PCC Product control center 生產管制中心PPC Production Plan Control 生產計劃控制MC Material Control 物料控制DC Document Center 資料中心QE Quality Engineering 品質工程(部)

4

Page 5: 鴻海公司常用英語

QA Quality Assurance 品質保證(處)QC Quality Control 品質管制(課)PD Product Department 生產部LAB Laboratory 實驗室IE Industrial Engineering 工業工程R&D Research & Design 設計開發部生產類PCs Pieces 個(根,塊等)PRS Pairs 雙(對等)CTN Carton 卡通箱PAL Pallet/skid 棧板PO Purchasing Order 采購訂單MO Manufacture Order 生產單D/C Date Code 生產日期碼ID/C Identification Code (供應商)識別碼SWR Special Work Request 特殊工作需求L/N Lot Number 批號P/N Part Number 料號OEM Original Equipment Manufacture 原設備製造PC Personal Computer 個人電腦CPU Central Processing Unit 中央處理器A.S.A.P As Soon As Possible 盡可能快的E-MAIL Electrical-Mail 電子郵件N/A Not Applicable 不適用QTY Quantity 數量I/O input/output 輸入/輸出NG Not Good 不行,不合格C=0 Critical=0 極嚴重不允許APP Approve 核準,認可,承認CHK Check 確認ASS'Y Assembly 裝配,組裝T/P True Position 真位度5WIH When, Where, Who, What, Why, How to6M Man, Machine, Material, Method, Measurement, Message4MTH Man, Material, Money, Method, Time, How 人力,物力,財務,技術,時間(資源)SQA Strategy Quality Assurance 策略品質保證DQA Design Quality Assurance 設計品質保證MQA Manufacture Quality Assurance 製造品質保證SSQA Sales and service Quality Assurance 銷售及服務品質保證LRR Lot Reject Rate 批退率

5

Page 6: 鴻海公司常用英語

SPS Switching power supply 電源箱DT Desk Top 臥式(機箱)MT Mini-Tower 立式(機箱)DVD Digital Video DiskVCD Video Compact DiskLCD Liquid Crystal DisplayCAD Computer Aided DesignCAM Computer Aided ManufacturingCAE Computer Aided EngineeringPCB Printed Circuit Board 印刷電路板CAR Correction Action Report 改善報告NG Not Good 不良WDR Weekly Delivery Requirement 周出貨要求PPM Percent Per Million 百萬分之一TPM Total Production Maintenance 全面生產保養MRP Material Requirement Planning 物料需計劃OS Operation System 作業系統TBA To Be Assured 待定,定缺D/C Drawing ChangeP/P Plans & ProcedureEMI Electrical-Music Industry 電子音樂工業 Electrical Magnetic Interference 電子干扰RFI Read Frequency Input 讀頻輸入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material SizeLED lighting-emitting diode 發光二极管QBR Quarter Business RecordCIP Continuous improvement process FGI Forecasted Goal InventoryCNC Computerized numeral controllerB2C Business to customerB2B Business to businessAVL Approved vendor listPOP Procedure of packagingEOL End of lifeVDCS Vender defect correcting sheetPDCS Process defect correcting sheetGRN Goods receiving note

6

Page 7: 鴻海公司常用英語

A/R Accounting receivableA/P Accounting payable

三:專業詞匯通用類president董事長operator作業員position職務general manager總經理special assistant 特助deputy manager |'depjuti| =vice manager副理deputy supervisor =vice supervisor副課長group leader組長line leader線長supervisor 課長responsible department負責單位Human Resources Department人力資源部Head count 人頭數production department生產部門planning department企劃部QC Section品管課stamping factory沖壓廠painting factory烤漆廠molding factory成型廠administration/general affairs dept./總務部production unit生產單位meeting minutes會議記錄distribution department分發單位subject主題

conclusion結論decision items決議事項pre-fixed finishing date預定完成日Color management 顏色管理 Visual management 目視管理 production capacity生產力first count初盤first check初盤復櫂second count 復盤second check復盤復核quantity of physical inventory second count 復盤點數量physical inventory盤點數量physical count quantity帳面數量difference quantity差異量spare parts physical inventory list備品盤點清單cause analysis原因分析waste materials廢料description品名specification 規格model機種work order工令revision版次remark備注 registration登記registration card登記卡to control管制application form for purchase請購

單consume, consumption消耗to notify通知to fill in填寫to collect, to gather收集statistics統計cosmetic inspection standard 外觀檢驗規範 computer case 電腦外殼(組件)personal computer enclosure 電腦機箱產品 front plate前板rear plate后板chassis |'∫æsi| 基座bezel panel面板Hood 上蓋 base pan 基座 bezel 面板 riser card 擴充卡 flat cable 排線 TOP driver cage 上磁架 bottom driver cage 下磁架 resin film 樹脂膜 raw materials原料materials物料steel plate鋼板roll/coil material捲料spare parts =buffer備品plastic parts塑膠件sheet metal parts/stamping parts

7

Page 8: 鴻海公司常用英語

沖件material check list物料檢查表finished product成品semi-finished product半成品good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品disposed goods處理品warehouse/hub倉庫packing material包材basket蝴蝶竺plastic basket膠筐flow chart流程表單production tempo生產進度現狀lots of production生產批量manufacture procedure制程to revise, modify修訂to switch over to, switch—to, switching over切換engineering bottleneck, project difficulty工程瓶頸glove(s)手套

glove(s) with exposed fingers割手套Band-Aid創可貼Industrial alcohol工業酒精broom掃把mop拖把vacuum cleaner吸塵器rag 抹布garbage container灰箕garbage can垃圾箱garbage bag垃圾袋liaison聯絡單rags抹布lamp holder燈架to mop the floor拖地to clean a table擦桌子air pipe 氣管delivery deadline交貨期die worker模工production, to produce生產equipment設備resistance電阻beacon警示燈

coolant冷卻液crusher破碎機club car高爾夫球車plate電鍍power button電源按鍵reset button重置鍵forklift叉車 Workshop traveler 天車trailer =long vehicle拖板車Hydraulic trolley手壓車hydraulic hand jack油壓板車casing = containerization裝箱velocity速度patent專利coordinate座標supply and demand供求career card履歷卡barricade隔板carton box紙箱to pull and stretch拉深work cell/work shop工作間sub-line支線

bottleneck 瓶頸

模具工程類plain die簡易模pierce die沖孔模forming die成型模progressive die連續模stage die工程模compound die復合模shearing die剪邊模riveting die鉚合模feature die公母模male die公模female die母模cavity型控 母模core模心 公模

die change 換模to fix a die裝模to repair a die修模punch set上模座punch pad上墊板punch holder上夾板stripper pad脫料背板up stripper上脫料板upper plate上模板lower plate下模板die pad下墊板die holder下夾板die set下模座

bottom block下墊腳bottom plate下托板(底板) upper supporting blank上承板upper padding plate blank上墊板top plate上托板(頂板)top block上墊腳stripping plate內外打(脫料板)outer stripper外脫料板inner stripper內脫料板lower stripper下脫料板 punch沖頭insert入塊(嵌入件)

8

Page 9: 鴻海公司常用英語

deburring punch壓毛邊沖子groove punch壓線沖子stamped punch字模沖子round punch圓沖子special shape punch異形沖子bending block折刀roller滾軸baffle plate擋塊located block定位塊supporting block for location定位支承塊air cushion plate氣墊板air-cushion eject-rod氣墊頂桿trimming punch切邊沖子stiffening rib punch = stinger 加強筋衝子ribbon punch壓筋沖子reel-stretch punch卷圓壓平沖子guide plate定位板sliding block滑塊sliding dowel block滑塊固定塊die locker鎖模器pressure plate =plate pinch壓板thickness gauge厚薄規cutting die, blanking die沖裁模die block模塊folded block折彎塊sliding block滑塊location pin定位銷lifting pin頂料銷die plate, front board模板padding block墊塊stepping bar墊條panel board鑲塊to load a die裝上模具to unload a die 御模具active plate活動板lower sliding plate下滑塊板upper holder block上壓塊

upper mid plate上中間板spring box彈簧箱spring-box eject-rod彈簧箱頂桿spring-box eject-plate彈簧箱頂板bushing block襯套cover plate蓋板guide pad導料塊pilot導正筒trim剪外邊pierce剪內邊pocket for the punch head挂鉤槽slug hole廢料孔radius半徑shim/wedge/heel/pad/spacer/gasket楔子torch-flame cut火焰切割set screw止付螺絲form block折刀round pierce punch =die button圓沖子shape punch =die insert異形子stock located block定位塊metal plate鈑金miller銑床grinder磨床tolerance公差score =groove壓線sliding block滑塊 lathe車active plate活動板baffle plate擋塊cover plate蓋板groove punch壓線沖子air-cushion eject-rod氣墊頂桿spring-box eject-plate彈簧箱頂板capability能力parameter參數factor系數

driller鉆床set up die架模height of die setting up架模高度analog-mode device類模器inner guiding post內導柱inner hexagon screw內六角螺釘dowel pin固定銷coil spring彈簧lifter pin頂料銷eq-height sleeves =spool等高套筒pin銷lifter guide pin浮升導料銷guide pin導正銷wire spring圓線彈簧outer guiding post外導柱stop screw止付螺絲located pin定位銷outer bush外導套press specification沖床規格die height閉模高度flow mark流痕welding mark溶合痕post screw insert螺紋套筒埋值self tapping screw自攻螺絲stripper plate脫料板piston活塞handle mold手持式模具 flash mold溢流式模具 positive mold擠壓式模具 split mold分割式模具die lifter舉模器top stop上死點bottom stop下死點one stroke一行程to continue, cont.連動to grip(material)吸料location lump, locating piece,

9

Page 10: 鴻海公司常用英語

location block定位塊reset復位to file burr 銼毛刺embedded lump |in'bed| |lmp|鑲塊stamping-missing漏沖to tight a bolt擰緊螺栓to loosen a bolt擰鬆螺栓punched hole沖孔to cut edge =side cut =side scrap 切邊to bending折彎to pull, to stretch拉伸engraving, to engrave刻印stamping 油印to stake鉚合designing, to design設計

design modification 設計脩改成gauge(or jig)治具pedal踩踏板stopper阻擋器flow board流水板torque扭矩spline =the multiple keys花鍵quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel鎢高速的moly high speed steel鉬高速的forming成型(抽凸,沖凸)draw hole抽孔

bending折彎emboss凸點dome凸圓semi-shearing半剪stamp mark沖記號deburr or coin壓毛邊punch riveting沖壓鉚合side stretch側沖壓平reel stretch卷圓壓平groove壓線stamp letter沖字(料號)tick-mark nearside正面壓印tick-mark farside反面壓印extension DWG展開圖procedure DWG工程圖die structure DWG模具結構圖

沖壓類punch, press沖punching machine 沖床hydraulic machine油壓機jack升降機decoiler整平機manufacture management製造管理

stamping, press沖壓feeder送料機rack, shelf, stack料架taker取料機to reverse material 翻料to load material上料to unload material卸料

to return material/stock to退料scraped |'skræpid|報廢scrape ..v.刮;削robot機械手production line流水線packaging tool打包機packaging打包

成型類well type蓄料井insulated runner絕緣澆道方式hot runner熱澆道runner plat澆道模塊valve gate閥門澆口band heater環帶狀的電熱器spindle閥針spear head鉋尖頭slag well冷料井

cold slag冷料渣air vent排氣道welding line熔合痕eject pin頂出針knock pin頂出銷return pin回位銷反頂針sleeve套筒stripper plate脫料板insert core放置入子

runner stripper plate澆道脫料板guide pin導銷eject rod (bar)(成型機)頂業捧subzero深冷處理three plate三極式模具runner system澆道系統stress crack應力電裂

10

Page 11: 鴻海公司常用英語

orientation定向sprue gate射料澆口,直澆口nozzle射嘴sprue lock pin料頭鉤銷(拉料杆)

slag well冷料井side gate側澆口edge gate側緣澆口tab gate搭接澆口film gate薄膜澆口flash gate閘門澆口slit gate縫隙澆口fan gate扇形澆口

dish gate因盤形澆口diaphragm gate隔膜澆口ring gate環形澆口submarine gate潛入式澆口tunnel gate隧道式澆口pin gate針點澆口runner less無澆道sprue less 無射料管方式long nozzle延長噴嘴方式spur澆口;溶 waste廢料board看板

sliding rack滑料架to impose lines壓線to compress, compressing壓縮character die字模to feed, feeding送料material change, stock change材料變更feature change 特性變更prepare for, make preparations for

準備rotating speed, revolution轉速abnormal handling異常處理

組裝類Assembly line組裝線Layout布置圖Conveyer流水線運輸帶Rivet machine拉釘機Rivet gun拉釘槍Screw driver起子Electric screw driver電動起子Hydraulic machine 液壓機Pneumatic screw driver氣動起子automation自動化to stake, staking, riveting鉚合add lubricant oil加潤滑油argon welding氬焊cylinder油缸robot機械手conveying belt輸送帶transmission rack輸送架

to draw holes抽孔bolt螺栓nut 螺母screw 螺絲identification tag標示單screwdriver plug起子插座automatic screwdriver電動啟子to move, to carry, to handle搬運be put in storage入庫packing包裝staker = riveting machine鉚合機fit together組裝在一起fasten鎖緊(螺絲)fixture 夾具(治具)pallet/skid棧板barcode條碼

barcode scanner條碼掃描器fuse together熔合fuse machine/heat stake熱熔機processing, to process加工delivery, to deliver 交貨to return delivery to. to send

delivery back to return of goods退貨easily damaged parts易損件standard parts標準件to lubricate潤滑spring 彈簧spare tools location/buffer手工備品倉spare molds location模具備品倉tox machine自鉚機

烤漆類phosphate皮膜化成viscosity涂料粘度alkalidipping脫脂

main manifold主集流脈organic solvent有機溶劑demagnetization去磁;消磁

high-speed transmission高速傳遞heat dissipation熱傳rack上料

11

Page 12: 鴻海公司常用英語

volatile揮發性degrease脫脂rinse水洗alkaline etch齡咬desmot剝黑膜D.I. rinse純水次Chromate鉻酸處理Anodize陽性處理seal封孔scraped products報放品disposed products處理品dismantle the die折模auxiliary function輔助功能heater band 加熱片

thermocouple熱電偶derusting machine除銹機degate打澆口dryer烘干機induction感應induction light感應光response =reaction =interaction感應ram連杆edge finder巡邊器concave凸convex凹cold slug冷塊blush 導色

gouge溝槽;鑿槽satin texture段面咬花witness line證示線grit沙礫granule =pellet =grain細粒sand blasting噴沙grit maker抽粒機cushion緩沖fillet鑲;嵌邊roller pin formality滾針形式cam driver鍘楔shank摸柄crank shaft曲柄軸

品質類qualified products, up-to-grade products良品defective products, not up-to-grade products不良品defective product box不良品箱poor processing 制程不良poor incoming part來件不良exposed metal/bare metal金屬裸露excessive defect過多的缺陷critical defect極嚴重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合規格cosmetic defect外觀不良lack of painting烤漆不到位slipped screw head/slippery slipped thread滑絲missing part漏件wrong part錯件oxidation氧化defective threading抽芽不良

poor staking鉚合不良deficient purchase來料不良deficient manufacturing procedure

制程不良cosmetic inspection外觀檢查 inner parts inspection內部檢查blister 氣泡angular offset 角度偏差dent 壓痕scratch 刮傷deformation 變形filings 鐵削defective label 不良標簽abrasion 磨損Breaking. (be)broken,(be)cracked

斷裂short射料不足nick缺口speck瑕疪shine亮班splay 銀紋gas mark焦痕

delaminating起鱗speckle斑點mildewed =moldy = mouldy發霉deformation變形burr(金屬)flash(塑件)毛邊poor staking鉚合不良excessive gap間隙過大grease/oil stains油污inclusion雜質shrinking/shrinkage縮水mixed color雜色fold of packaging belt打包帶折皺painting make-up補漆discoloration羿色water spots水漬impurity 雜質Mismatch 錯位failure, trouble 故障deformation 變形rust 生銹

12

Page 13: 鴻海公司常用英語

peel 脫漆Shrink 縮水Contamination  臟污water spots 水漬Gap   間隙label error 標簽錯誤Missing label 漏貼rejection criteria 拒收標准Suspected rejects 可疑庇abrasion 損傷、磨損

Texture surface 印花紋表面Streak 條紋stains  污點Blotch 斑點discoloration  脫色Inclusion 雜質slug mark 壓痕dirt grime 灰塵 blush   毛邊薄膜sink  下凹

Hickey 漏漆labels and logos  貼紙與商標Configuration labels  組合貼紙 corrugated container  瓦擺紙箱Delaminating 脫層splattering 散點Gouge 銼孔 puckering   折痕

13

Page 14: 鴻海公司常用英語

14