5.k systems2print
TRANSCRIPT
-
8/18/2019 5.K Systems2Print
1/36
www.k-systems.dk4
G185 INCUBATOR
IVF TRI-GAS Incubator G185
Common Laboratory Pains G185 Laboratory Solutions
compartment
of gas and temperature
high gas consumption
conditions
2 2
2
on tro l led en v ironmen t
2 2 2 2 range: 2-20% 2 2 2 2
2 and N2.
-
8/18/2019 5.K Systems2Print
2/36
www.k-systems.dk 5
G185 INCUBATOR
External CO2 Vaisala sensor
2 monitor
&
for constant reading of
data transmitting.
-
8/18/2019 5.K Systems2Print
3/36
www.k-systems.dk6
G185 INCUBATOR
22110 22200
Temperature range
2 2
2 2
2 2 2 2
Prepared for Ph Monitoring
2
-
8/18/2019 5.K Systems2Print
4/36
www.k-systems.dk 7
QC DEVICES
range.
measurement.
CO2 and O2 Gas Analyzer 2/2
2 2 2 2 2
Gas analyzer
2 with reference channel
2
2 0-20%
2 0-100%
Measurements Accuracy
2 1
2
2 temperature and pressure
2 < 20 seconds
-
8/18/2019 5.K Systems2Print
5/36
www.k-systems.dk8
around and is ideal for:
- the aspiration room; offers ideal environment during the retrieval
process
in the entire system:
22 2 2
decontamination.
2 2
2 2
2 2
that enters the enclosure near the entry ports on the sides during
opening.
ergonomic design to avoid pressure points on the arm
move the unit around
2 2 sensor or for various other purposes.
G603
-
8/18/2019 5.K Systems2Print
6/36
www.k-systems.dk 9
G603
The enlarged hole for microscope oculars allow the user to move
the microscope and the oculars in the desired positioning and gives
External Quality Control
2
External CO2 2 monitor
element
-
8/18/2019 5.K Systems2Print
7/36
www.k-systems.dk10
112 kg
10 kg
2 gas control
2 gas control
Ambient Conditions
Filters
Main Filter
Illumination
G603
-
8/18/2019 5.K Systems2Print
8/36
www.k-systems.dk 11
control of temperature and humidity in order to maintain correct
parameters and in addition assure that everything takes place in
noise level for your comfort.
offers you state of the art technology
providing simultaneous product and operator protection. Elegant
structure, without compromising performance or the renowned
-
8/18/2019 5.K Systems2Print
9/36
www.k-systems.dk12
K-SYSTEMS and is a result of years of
warming element and temperature sensors.
top. This typically happens when using electrical heating systems.
Advantages such as low maintenance, improved heating of the critical
world wide.
offer a variety of models and configuration so your workstation can
workstations come as standard with K-SYSTEMS heated glass stage.
Additionally, all models have a gassing and humidification system
2 conditions. The warmed surface is controlled
Two year warranty.
Some features are standard and some have a list of choices.
Additionally, we also offer a variety of options at additional costs.
-
8/18/2019 5.K Systems2Print
10/36
www.k-systems.dk 13
L124 IVF for the mounting of a stereo
microscope.
Overall dimensions(WxDxH):1246x735x2020mm /
49x29x80”
L125 IVF and for the mounting of
a stereomicroscope, right
Overall dimensions(WxDxH):1546x735x2020mm /61x29x80”
L126 IVF workplace and for
the mounting of a
stereomicroscope, right
sided.
workspace for
integration of more
options like an
wall.
Overall dimensions(WxDxH):1846x735x2020mm / 73x29x80”
L124 ICSI and prepared for an inverted
flow. The integrated Anti-
independently of the
workstation.
Overall dimensions(WxDxH):1246x735x2020 mm /49x29x80”
Warmed Glass Stage (not L124 ICSI) The Control Panel The Gassing and Humidification System (not L124 ICSI)
-
8/18/2019 5.K Systems2Print
11/36
www.k-systems.dk14
L126 Dual IVF stereomicroscopes.
A dual workstation offers the potential to simultaneously set up a
Overall dimensions (WxDxH): 1846x735x2020mm / 73x29x80”
of a stereomicroscope and left side is dedicated to an inverted
the workstation while at the same time giving overall aseptic work
conditions.
Overall dimensions (WxDxH): 1846x735x2020mm / 73x29x80”
Electrical outlet inside the cabinet Vertical Laminar Air Flow Warmed Area of the Table Top (not L124 ICSI)
-
8/18/2019 5.K Systems2Print
12/36
www.k-systems.dk 15
STANDARD FEATURES - L100
STANDARD FEATURES FOR
SERIES
To create the aseptic workspace, vertical laminar air flow is used.
edge. This ergonomically shaped edge is made to avoid pressure
points on the arms of the operator during microscopy.
and user friendly work environment.
aluminium composite construction with an integrated warming
element and temperature sensors.
electrical heating systems. Advantages such as low maintenance,
improved heating of the critical area around the light opening, and
installed world wide.
Model T-845 R (Standard)
Model T-745 R (only L126MP-standard)
Model T-1045 R
Model T-1645 R (only L126)
Each heated area is controlled by 3 sensors providing a stable temperature of the entire warmth area.
-
8/18/2019 5.K Systems2Print
13/36
www.k-systems.dk16
Temperature accuracy of +/-0.4ºC. Ambient to 49.9°C
heating temperature system is integrated in the microscope light
opening. The system is controlled on the control panel and provides
with K-SYSTEMS heated glass stage.
access for the technician. The control panel permits control of
and humidification system is
using a digital flow meter. For
flushing, the humidified and
heated gas is diffused through
Two year warranty.
OPTIONAL FEATURES
training and education.
and high resolution monitor
permit connectivity to a
microscope camera and to an
control panel. The viewing panel of glass is designed to secure a non
2 a two level alarm system. As an
supplied.
To improve the work flow andto reduce the time of handling
oocytes in an unheated and
Pass Through Tunnel is a great
alternative to a hatch in the door
Pass Through Tunnel is made of
stainless steel with integrated
heating elements and a top hinged
K-SYSTEMS provides only the Heated Pass Through tunnel within
the workstation. The hatch in the wall of the building remains theresponsibility of the customer.
-
8/18/2019 5.K Systems2Print
14/36
www.k-systems.dk 17
OPTIONAL FEATURES - L100
Model T-1045 R
Model T-1645 R (only L126)
L100 IVF Standard FeaturesL124IVF
L124ICSI
L125IVF
L126IVF
L126Dual
L126
X X X X X X
X X X X X X
X X X X X
X X X X
X X X
X
X X X X X
X X X X X
X X X X X
X X X X X X
X X X X X X
X X X X X X
X X X X X X
X
Programming for an automactic start up of the workstation X X X X X X
X X X X X
X X
Standard
RI WitnessTM
-
8/18/2019 5.K Systems2Print
15/36
www.k-systems.dk18
D i m e n s i o n s L124 L125 L126
Electrical controlled heating system Electrical controlled heating system Electrical controlled heating system
Temperature Accuracy- Spot variation
Temperature Accuracy- overall variation
Mains Power Supply
of range temperature.
of range temperature.
range temperature.
PreFilter
Alarms of range temperature.
of range temperature.
of range temperature.
plate
Aluminium
Aluminium
Aluminium
T r e a t m e n t
corrosion class 1 corrosion class 1
corrosion class 1
-
8/18/2019 5.K Systems2Print
16/36
www.k-systems.dk 19
product and the operator.
work position.
There are 2 different models to choose from:
The K-SYSTEMS
As standard, all models have a constant temperature controlled
top. As an option we offer a stand alone gassing and humidification 2 conditions.
For more information on standard features and options please see
page 21-22.
Two year warranty.
K-SYSTEMS and is a result of years of
warming element and temperature sensors.
top. This typically happens when using electrical heating systems.
Advantages such as low maintenance, improved heating of the critical
world wide.
-
8/18/2019 5.K Systems2Print
17/36
www.k-systems.dk20
L224 IVF and for the mounting of a
stereomicroscope, right sided
Overall dimensions (WxDxH):1246x800x2020 mm /49x32x80”
L226 IVF and for the mounting of a
stereomicroscope, right sided
Overall dimensions (WxDxH):1846x800x2020 mm /73x32x80”
L226 Dual IVF workplaces and for
mounting of two
stereomicroscopes.
A dual workstation
offers the potential to
simultaneously set up a
and keep the workflow of
Overall dimensions
(WxDxH):1846x800x2020 mm /73x32x80”
Warmed Glass Stage The Control Panel Vertical Laminar Air Flow
Warmed Area of the Table Top
-
8/18/2019 5.K Systems2Print
18/36
www.k-systems.dk 21
STANDARD FEATURES - L200
To create the aseptic workspace, vertical laminar air flow is used in
and user friendly work environment For work space with a
Model T-845 R (Standard)
ergonomically shaped edge is made to avoid pressure points on the
arms of the operator during microscopy.
aluminium composite construction with an integrated warming
element and temperature sensors.
electrical heating systems. Advantages such as low maintenance,
improved heating of the critical area around the light opening, and
installed world wide.
Each heated area is controlled by 3 sensors providing a stable temperature of the entire warmth area.
-
8/18/2019 5.K Systems2Print
19/36
www.k-systems.dk22
- L200
For optimal perfomance of the system an airspeed sensor is
An excellent tool for viewing, training and education. entering the menu system on the control panel.
of the air flow and is easening the cleaning process.
access for the technician. The control panel permits control of the
following:
K-SYSTEMS
Temperature accuracy of +/-0.4ºC
A controlled heating temperature system is integrated in the
microscope light opening. The system is controlled on the control
dishes during microscopy.
-
8/18/2019 5.K Systems2Print
20/36
www.k-systems.dk 23
FEATURES - L200
L200 IVF Standard FeaturesL224IVF
L226IVF
L226Dual
X X X
X X X
X X X
X X
X X
X
X X X
X X X
X X X
X X X
X X X
Programming for an automatic start up of the workstation X X X
Air Speed Sensor X X X
X X X
Standard
-
8/18/2019 5.K Systems2Print
21/36
www.k-systems.dk24
- L200
D i m e n s i o n s L224 L226
Electrical controlled heating system Electrical controlled heating system
Temperature Accuracy
- Spot variation
Temperature Accuracy- overall variation
Air flow
Mains Power Supply
Alarm velocity.
velocity.
inlet.
Aluminium
Aluminium
T r e a t m e n t
class 1 class 1
-
8/18/2019 5.K Systems2Print
22/36
www.k-systems.dk 25
lean cost structure. Even though there are fewer optional features, it
All workstations have a very low noise level comfort and an
2 conditions.
Two year warranty.
K-SYSTEMS and is a result of years of
warming element and temperature sensors.
top. This typically happens when using electrical heating systems.
Advantages such as low maintenance, improved heating of the critical
world wide.
L423 IVF workplace and for
the mounting of a
stereomicroscope,
or left sided.
Overall dimensions(WxDxH):946x730x1720 mm /37x29x68”
L424 IVF workplace and for
the mounting of a
stereomicroscope,
or left sided.
Overall dimensions (WxDxH):1246x730x1720 mm / 49x29x68”
L426 IVF
Overall dimensions (WxDxH):1846x730x1720 mm / 73x29x68”
L426 Dual IVF workplaces and for
the mounting of two
stereomicroscopes.
A dual workstation
offers the potential to
simultaneously set up a
and keep the workflow of
Overall dimensions(WxDxH):1846x730x1720 mm /73x29x68”
-
8/18/2019 5.K Systems2Print
23/36
www.k-systems.dk26
STANDARD FEATURES - L400
edge. This ergonomically shaped edge is made to avoid pressure
points on the arms of the operator during microscopy.
K-SYSTEMS
to specific demands. Therefore the workstations are provided witha lot of features, some of which are standard and others are as
options:
K-SYSTEMS K-SYSTEMS
To create the aseptic workspace, vertical laminar air flow is used in
Model T-845 R (Standard)
Model T-1045 R
Model T-1645 R (only L426)
Fahrenheit and is controlled with three sensors per heated area.
access for the technician. The control panel permits control of the
following:
K-SYSTEMS
aluminium composite construction with an integrated warming
element and temperature sensors.
electrical heating systems. Advantages such as low maintenance,improved heating of the critical area around the light opening, and
installed world wide.
Each heated area is controlled by 3 sensors providing a stable temperature of the entire warmth area.
-
8/18/2019 5.K Systems2Print
24/36
www.k-systems.dk 27
OPTIONAL FEATURES - L400
L400 IVF Standard FeaturesL423IVF
L424IVF
L426IVF
L426Dual
Programming for an automactic start up of the workstation
Electrical socket 1 unit - placed on the left
Temperature accuracy of +/-0.4ºC
Embryos are sensitive to temperature fluctuations.
microscope light opening. The system is controlled on the control dishes during microscopy.
Standard
-
8/18/2019 5.K Systems2Print
25/36
www.k-systems.dk28
- L400
D i m e n s i o n s L423 L424
12A 12A
Temperature Accuracy- Spot variation
Temperature Accuracy- overall variation
Air flow
Mains Power Supply
Alarms of range temperature.
of range temperature.
of range temperature.
The filter efficiency of the main
The filter efficiency of the main
The filter efficiency of the main
plate
T r e a t m e n t
corrosion class 1 corrosion class 1
corrosion class 1
-
8/18/2019 5.K Systems2Print
26/36
www.k-systems.dk 29
The class 100 line is designed for product protection using vertical
air flow.
There are 2 different series to choose from:
SYSTEMS with respect to ergonomics and noise levels.
An elegant design means that not only are these units pleasant to
models to choose from:
models to choose from:
work area.
Two year warranty.
L100 LAF Standard Features L124LAF
L125LAF
L126LAF
Programming for an automactic start up of theworkstation
L400 LAF Standard FeaturesL423LAF
L424LAF
L426LAF
System
Programming for an automactic start up of the
workstation
Standard
-
8/18/2019 5.K Systems2Print
27/36
www.k-systems.dk30
BIOSAFETY CABINETS
work position.
The K-SYSTEMS
An elegant design means that not only are these units pleasant to the
L224 L226
checked
Programming for an automactic start up of theworkstation
Air Speed Sensor
filter
Standard
-
8/18/2019 5.K Systems2Print
28/36
www.k-systems.dk 31
ACCESSORIES
26001
26003
26004
26006
26008
26018
26059
26060
26027
26028
26031
26029
26030
26013
26058
-
8/18/2019 5.K Systems2Print
29/36
www.k-systems.dk32
ACCESSORIES
31053
31054
31055
26055
53338
of 10 ml 53340
100 series
31009
31010
31008
Order
-
8/18/2019 5.K Systems2Print
30/36
www.k-systems.dk 33
The K-SYSTEMS light sources provide correct illumination, which is
a key to informative investigation and inspection during microscopy.
inspection of different morphological characteristics. The hollow
for routine procedures.
The K-SYSTEMS high end illumination system features two
standard inspections at high magnification.
LS11
Material Aluminium Aluminium
Main voltage
Power consumption
Fuse
-
8/18/2019 5.K Systems2Print
31/36
www.k-systems.dk34
ANTI VIBRATION TABLE
Anti Vibration Table
ensuring a fast dampening effect.
platform, which gives a smooth and roomy workspace around the
patient records etc.
The K-SYSTEMS steel shelf as standard.
Displacement
Time
Reverberation of theanti-vibration system
The microscope platform of the K-SYSTEMS Anti-Vibration Table
does not touch the actual table. The result is that vibrationsreaching the table do not affect the platform.
AV1
Material Stainless steel
100 kg
Stainless steel plate
Monitor on Arm (optional feature )
-
8/18/2019 5.K Systems2Print
32/36
www.k-systems.dk 35
D i m e n s i o n s L524
1A
Temperature Accuracy- Spot variation
Temperature Accuracy- overall variation
Mains Power Supply
Fuse
Alarms temperature.
plate
T r e a t m e n t
corrosion class 1
prepared for a stereo microscope, control panel is integrated in the
from any K-SYSTEMS panel.
Standard
L524 Standard Features
L524
IVF
Programming for an automactic start up of the workstation
control panel
-
8/18/2019 5.K Systems2Print
33/36
www.k-systems.dk36
provides optimal temperature control of utensils, media and
follicular fluid during oocyte retrieval.
warm.
positioning of the trolley and more efficient use of limited space.
R65
Material Stainless steel
Power supply
Power consumption
Temperature range
Temperature accuracy
Alarms
temperature
utilised.
T47
Material Aluminium
Temperature range
for mains:
Spot temperature accuracy
Power consumption
Alarms
temperature
-
8/18/2019 5.K Systems2Print
34/36
www.k-systems.dk 37
easy access. The water for humidification of the gas is heated up
with a choice of either a diffuser or an open end. The diffuser open end the humidification level is lowered and less condensation
occurs.
if water is spilled.
Material Stainless steel
Power supply, adapter for mains
Power consumption mains
Temperature preset
Temperature accuracy
Flowmeter
Power consumption
Alarms
52552
CO2
2
function and an humidifier.
2
G85
Material:
Power supply:
Power consumption:
Temperature range:
Flow range:
Spot temperature accuracy
Alarms:
temperature and air flow
-
8/18/2019 5.K Systems2Print
35/36
www.k-systems.dk38
during transport.
and reading of the temperature is mounted on the front. The
2 2 and since the surface area compared to the volume of media is
gas level.
time practical with respect to cleaning. The control panel is easy to
SYSTEMS
only sealed after purging.
G95
2.2 litres
Material
Temperature range
2 in-air or the like
mains:
Power consumption mains
Power supply, car
Power consumption car:
Total charging time
Alarms
2 holding time 1% drop. per hour
Temperature accuracy
-
PORTABLE INCUBATOR
B08B06
B24
B16F
B25
B29B28
B16N
-
8/18/2019 5.K Systems2Print
36/36
or Fahrenheit.
easy-to-clean anodised aluminium.
G73
Material Stainless steel
Temperature range
Temperature accuracy
for mains:
Power consumption mains
Power consumption
Alarms temperature
B01
B04
B08
B03
B06
B40
B43B41