61557-10-2001
TRANSCRIPT
-
7/30/2019 61557-10-2001
1/10
BRITISH STANDARD BS EN61557-10:2001
IEC 61557-10:2000
Electrical safety in lowvoltage distribution
systems up to 1000 V a.c.
and 1500 V d.c.
Equipment for testing,
measuring or
monitoring of
protective measures
Part 10: Combined measuringequipment for testing, measuring ormonitoring of protective measures
The European Standard EN 61557-10:2001 has the status of aBritish Standard
ICS 17.220.20
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
p
y
y
py()
-
7/30/2019 61557-10-2001
2/10
BS EN 61557-10:2001
This British Standard, havingbeen prepared under thedirection of theElectrotechnical SectorCommittee, was published
under the authority of theStandards Committee andcomes into effect on15 July 2001
BSI 07-2001
ISBN 0 580 37689 3
National foreword
This British Standard is the official English language version ofEN 61557-10:2001. It is identical with IEC 61557-10:2000
The UK participation in its preparation was entrusted to Technical Committee
PEL/85, Measuring equipment for electrical and electromagnetic quantities,which has the responsibility to:
A list of organizations represented on this committee can be obtained onrequest to its secretary.
From 1 January 1997, all IEC publications have the number 60000 added tothe old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1.For a period of time during the change over from one numbering system to theother, publications may contain identifiers from both systems.
Cross-references
Attention is drawn to the fact that CEN and CENELEC Standards normallyinclude an annex which lists normative references to internationalpublications with their corresponding European publications. The BritishStandards which implement these international or European publications maybe found in the BSI Standards Catalogue under the section entitledInternational Standards Correspondence Index, or by using the Findfacility of the BSI Standards Electronic Catalogue.
A British Standard does not purport to include all the necessary provisions ofa contract. Users of British Standards are responsible for their correctapplication.
Compliance with a British Standard does not of itself confer immunityfrom legal obligations.
aid enquirers to understand the text;
present to the responsible international/European committee anyenquiries on the interpretation, or proposals for change, and keep theUK interests informed;
monitor related international and European developments andpromulgate them in the UK.
Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page,pages 2 to 6, an inside back cover and a back cover.
The BSI copyright date displayed in this document indicates when thedocument was last issued.
Amendments issued since publication
Amd. No. Date Comments
p
y
y
py()
-
7/30/2019 61557-10-2001
3/10
EUROPEAN STANDARD EN 61557-10
NORME EUROPENNE
EUROPISCHE NORM April 2001
CENELECEuropean Committee for Electrotechnical Standardization
Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61557-10:2001 E
ICS 17.220.20;29.080.01;29.240.01
English version
Electrical safety in low voltage distribution systemsup to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring of protective measuresPart 10: Combined measuring equipment for testing, measuring
or monitoring of protective measures
(IEC 61557-10:2000)
Scurit lectrique dans les rseauxde distribution basse tension jusqu'1 000 V c.a. et 1 500 V d.c. -Dispositifs de contrle, de mesure ou desurveillance des mesures de protectionPartie 10: Appareils combins de contrle,de mesure ou de surveillance de mesuresde protection
(CEI 61557-10:2000)
Elektrische Sicherheit inNiederspannungsnetzen bis AC 1000 Vund DC 1500 V -Gerte zum Prfen, Messen oderberwachen von SchutzmanahmenTeil 10: Kombinierte Messgerte zumPrfen, Messen oder berwachen vonSchutzmanahmen
(IEC 61557-10:2000)
This European Standard was approved by CENELEC on 2001-03-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and United Kingdom.
p
y
y
py()
-
7/30/2019 61557-10-2001
4/10
Foreword
The text of document 85/213/FDIS, future edition 1 of IEC 61557-10, prepared by IEC TC 85, Measuringequipment for electrical and electromagnetic quantities, was submitted to the IEC-CENELEC parallel voteand was approved by CENELEC as EN 61557-10 on 2001-03-01.
This part 10 is to be used in conjunction with EN 61557-1.
The following dates were fixed:
latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement (dop) 2001-12-01
latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2004-03-01
__________
Endorsement notice
The text of the International Standard IEC 61557-10:2000 was approved by CENELEC as a EuropeanStandard without any modification.
__________
EN 6155710:2001
2
p
y
y
py()
-
7/30/2019 61557-10-2001
5/10
BSI 07-2001
CONTENTS
Page
1 Scope .............................................................................................................................. 42 Normative references....................................................................................................... 4
3 Definitions ....................................................................................................................... 4
4 Requirements .................................................................................................................. 4
5 Marking and operating instructions .................................................................................. 6
6 Tests ............................................................................................................................... 6
EN 6155710:2001
3
p
y
y
py()
-
7/30/2019 61557-10-2001
6/10
BSI 07-2001
ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMSUP TO 1 000 V a.c. AND 1 500 V d.c.
EQUIPMENT FOR TESTING, MEASURING OR MONITORINGOF PROTECTIVE MEASURES
Part 10: Combined measuring equipment for testing,measuring or monitoring of protective measures
1 Scope
This part of IEC 61557 specifies the requirements for combined measuring equipment whichcombines into one piece of apparatus, several measuring functions or methods of testing,
measuring or monitoring, some or all of which are covered in parts 2 to 7.
2 Normative references
Clause 2 of parts 1 to 7 of IEC 61557 applies.
3 Definitions
For the purposes of this part of IEC 61557, the definitions given in parts 1 to 7 of IEC 61557and the following definitions apply.
3.1combined measuring equipmentequipment which combines, into one piece of apparatus, several measuring functions ormethods of testing, measuring or monitoring, some or all of which are in accordance with
other parts of IEC 61557
3.2extraneous overvoltage
voltage applied to the terminals of the combined measuring equipment to test the overvoltagewithstand capability
4 Requirements
The requirements specified in the respective parts of the IEC 61557 series and the followingrequirements shall apply:
4.1 A user shall not be subjected to danger when the highest extraneous overvoltageaccording to the respective parts of this standard (see table 1) is accidentally applied to eachcombination of all test/measurement terminals in every possible combination of functions andranges of a combined measuring equipment, even though some of these functions are not
themselves covered by parts 2 to 7.
Al l other terminals shal l be clear ly identif iable. Any terminal which can be confused with atest/measurement terminal shall be indicated as such.
EN 6155710:2001
4
p
y
y
py()
-
7/30/2019 61557-10-2001
7/10
BSI 07-2001
Table 1 Extraneous overvoltage withstand capability
Part ofIEC 61557
2 3 4 5 6 7
Extraneousovervoltageand
duration time
1,2
U
N10 s
1,2
U
0continuous
and 1,1 phase to
phase voltage1 min
1,2
U
0continuous
1,2
U
0continuous
1,2
U
0continuous
and 1,1 phase to
phase voltage1 min
1,2
U
0continuous
The duration time shall be the longest possible indicated in the respective parts ofIEC 61557.
NOTE U0 is the voltage against earth (see 3.1.3a of IEC 61557-1).
UN is the nominal output voltage (see 3.2.1 of IEC 61557-1, and 3.1 of IEC 61557-2).
4.1.1 If parts of the combined measuring equipment are defective after the extraneousovervoltage is applied, the defect shall be clearly indicated. Indications and displayed valuesshall not lead to unsafe interpretations.
4.1.2 When the extraneous overvoltage is applied, protective devices may be activated. Theactivation of protective devices in equipment for measuring or testing insulation resistanceaccording to IEC 61557-2 shall be indicated, if the operation of the equipment is impaired.
4.2 When the combined measuring equipment bears one of the following markings, the
applied extraneous overvoltage can be reduced to a voltage of 1,1 phase to phase voltage:
a) DO NOT USE IN DISTRIBUTION SYSTEMS WITHVOLTAGES HIGHER THAN ... V.
The marking shall be written in the corresponding country language.
The value of the voltage shown on the marking shall be 1,1 maximum phase to phasevoltage.
or
b)
Example of pictogramfor a 500 V AC system
Pictogram and outline contrasting to the background
The value of the voltage shown on the marking shall be 1,1 maximum phase to phasevoltage.
EN 6155710:2001
5
p
y
y
py()
-
7/30/2019 61557-10-2001
8/10
BSI 07-2001
Combined measuring equipment bearing one of these markings shall withstand the abovespecified overvoltage for 1 min without any defect. Protective devices may be activatedaccording to 4.1.2.
If the combined measuring equipment includes an insulation resistance measuring or testingfunction, this function shall fulfill in addition the overvoltage requirement according toIEC 61557-2.
5 Marking and operating instructions
The requirements specified in the respective parts of IEC 61557 shall apply. If therequirements of 4.2 are applicable, the marking shall be clearly readable in the position ofnormal use.
6 Tests
In addition to the tests specified in the respective parts of IEC 61557, the following test shallbe executed:
6.1 The overvoltage withstand capability for the combined measuring equipment shall be
type tested by using an extraneous overvoltage either:
a) in accordance with 4.1
or
b) in accordance with 4.2
6.2 Compliance with the requirements given in clause 5 shall be verified (routine test).
6.3 The compliance with the test in this clause shall be recorded.
___________
EN 6155710:2001
6
p
y
y
py()
-
7/30/2019 61557-10-2001
9/10
p
y
y
py()
-
7/30/2019 61557-10-2001
10/10
BS EN 61557-10:2001IEC 61557-10:2000
BSI
389 Chiswick High Road
London
W4 4AL
BSI British Standards Institution
BSI is the independent national body responsible for preparingBritish Standards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.
Revisions
British Standards are updated by amendment or revision. Users ofBritish Standards should make sure that they possess the latest amendments oreditions.
It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover.Tel: 020 8996 9000. Fax: 020 8996 7400.
BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.
Buying standards
Orders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.Standards are also available from the BSI website at http://www.bsi-global.com.
In response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.
Information on standards
BSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to Exporters
Service. Various BSI electronic information services are also available which givedetails on all its products and services. Contact the Information Centre.Tel: 020 8996 7111. Fax: 020 8996 7048.
Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration.Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI isavailable on the BSI website at http://www.bsi-global.com.
Copyright
Copyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except as
permitted under the Copyright, Designs and Patents Act 1988 no extract may bereproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.
This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. If thesedetails are to be used for any other purpose than implementation then the priorwritten permission of BSI must be obtained.
If permission is granted, the terms may include royalty payments or a licensingagreement. Details and advice can be obtained from the Copyright Manager.Tel: 020 8996 7070.
p
y
y
py()