7 plexo 55 50 - 55

Upload: demo-only

Post on 14-Apr-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/30/2019 7 Plexo 55 50 - 55

    1/650

    Pak No. Kat.

    695 13 695 25 695 04 695 43 695 00

    Pak No. Kat.Switches 10 AX - 250 V Push-buttons 10 A

    Automatic switches, 230 V

    Plexo IP 55 IK 07modular mechanisms

    Mechanisms supplied with cover plate

    Installation with surface mounting boxes or flush mounting support frames

    Illuminated functions supplied with 230V lamps (except 695 43 / 695 44 / 696 33 / 696 34: supplied with 12 V lamps)Lamps and accessories

    Automatic connection

    Without neutral - 2 wire connection - IP 55 - IK 07

    1 695 00 Can be used instead of a 1 way switchNo additional wiring requiredOperates: 60 to 300 W incandescent and

    halogen lamps 230 VTemporization: 6 s to 6 min.Detection angle: 130Luminosity threshold: 3 to 1000 luxMaximum detection range: 8 m (adjustable)

    With neutral - 3 wire connection - IP 55 - IK 07

    1 695 02 Operates: 500 to 1000 W- incandescent and halogen lamps 230 V-ELV halogen lamps

    - fluocompactTemporization: 1 s to 16 min.Detection angle: 180Luminosity threshold: 3 to 1000 luxMaximum detection range: 8 m (adjustable)

    Grey/White

    IP 55 - IK 07

    10 695 11 Two-way switch5 695 21 Intermediate switch

    10/5 695 12 Two-way switch with indicator

    5 695 13 Illuminated two-way switch

    10 695 25 Two-gang two-way switch

    10 695 30 Double pole switch

    IP 55 - IK 07

    10/5 695 40 N/O contact

    10 695 41 Changeover (N/O + N/C contact)

    10/5 695 42 Illuminated, N/O contact

    10 695 43 Illuminated N/O contact, with label holderSupplied with 12 V lampCan be equipped with 230 V lamp

    5 695 44 Illuminated changeover pushbutton (N/O + N/C contact),with label holderSupplied with 12 V lampCan be equipped with 230 V lamp

    IP 55

    5 695 04 Electronic2-wire connectionSupplied with lamp

    Temporization: 25 s to 15 min.

    Maximum loads:- 1000 W incandescent and halogen 230 V- 400 W halogen 130V- 400 VA ELV halogen lamps- 400 VA fluorescent lamps- 2300 W resistive (heating)

    Illuminated time lag switch - 250 V

    Grey Grey

    Grey

  • 7/30/2019 7 Plexo 55 50 - 55

    2/651

    Plexo IP 55 IK 07modular mechanisms (continued)

    Pak No. Kat.

    695 02 695 17 695 34 695 08 695 70

    Pak No. Kat.Automatic switches, 230 V

    Light sensitive switches, 230 V

    Key operated switches 3 A - 250 V

    Electronic room thermostat 250 V

    Roller blinds control

    Socket outlets

    Mechanisms supplied with cover plate

    Installation with surface-mounting boxes or flush-mounting support frames

    Lamps and accessoriesAutomatic connection

    Without neutral with on/off function 2 wire connection - IP 55

    1 695 01 Can be used instead of a 1 way switchNo additional wiring requiredEquipped with on/off keys for manualoperation

    Operates: 40 to 400 W incandescent and halogenlamps 230 VTemporization: 1 s to 16 min.Detection angle: 180Luminosity threshold: 3 to 1000 luxMaximum detection range: 8 m (adjustable)

    Light sensitive switch 1 function - IP 55 - IK 07

    5 695 17 Can be used to switch a lighting circuit"ON"and "OFF" based on light conditions(nightfall, daybreak)Supplied in one piece, inlcuding

    photoelectric cellMaximum load:- 1400 W incandescent and halogen lamps 230 V- 400 VA fluorescent tubesLuminosity threshold: 0,5 to 1500 luxPhotoelectric cell IP 55

    5 695 18 For use with modular light sensitiveswitches Cat.Nos 037 21/23/25

    Supplied with RONIS key n 455Key removable in ay position

    1 695 34 2 positions marked "0 - I"2 N/O contacts

    1 695 35 2 positions marked "I - O - II"2 N/O contacts

    IK 55 IK 071 695 08 Ensures temperature control in damp

    locations or in specific conditions(e.g. workshops, laboratories,greenhouses, etc.)

    Adjustment range: 7 to 30CFor use with mains supply: 230V - 50/60 Hz

    Equipped with button for "summer / winter" function

    Manual roller blinds controller IP 55 IK 07

    5 695 39 Double push-button for systems withautomatic control box (electrical interlock)10 A -250 V

    German standard 16 A 250 V

    10/5 695 70 2P+ E with earth lateral contactwith automatic terminals

    10 695 71 2P+ E with earth lateral contact

    with screw terminals

    Grey

    Grey

    Grey/White

    Grey/White

    Grey

    Grey/White

  • 7/30/2019 7 Plexo 55 50 - 55

    3/652

    Plexo IP 55 IK 07modular mechanisms (continued)

    Pak No. Kat.

    695 47 695 49 695 83 + 695 91 695 76

    Pak No. Kat.Emergency stop functions 3 A 230 V

    Pilot light IP 55 - IK 07

    Socket outletsPrewired socket outlets 16 A - 250 V

    Mechanisms supplied with cover plate

    Installation with surface mounting boxes or flush mounting support frames

    Supplied with "emergency stop" label in 8 languagesYellow cover plate, red button

    1 695 47 Emergency stop button1 N/C contact1 pole

    1 695 48 Emergency stop with key for resetN/O + N/C contactKey RONIS n 455 suppliedKey removable in 0 position

    1 695 49 Emergency stop - stay put 1/4 releaseN/O + N/C contact

    Pilot lamp10 695 83 Accepts E 10 lamps 230 V - 5 W max(supplied)Screw connectionSupplied without diffusers (see below)

    5 695 91 Diffuser for pilot lamp red

    Automatic terminals

    One piece mechanism, only one connectionrequiredFor two or three gang surface mountingboxes or flush mounting supports

    German standard5 695 76 2 x 2P+E horizontal

    5 695 77 2 x 2P+ E vertical

    1 695 78 3 x 2P+E horizontal

    Grey/Yellow

    Grey

    Grey/White

    Fast installation thanks to prewired sockets and automatic connection

    Surfacemounting >

    Open double box with

    no partitionsfor optimum ease of wiring.

    Also double vertical and triple

    horizontal versions

    Double support-plate(horizontal or vertical)

    for more modularity

    when flush-mounting.

    Also double vertical andtriple horizontal versions

    flushmounting >

    Prewired double socket mechanism(horizontal or vertical).

    Available also in triple horizontal version

  • 7/30/2019 7 Plexo 55 50 - 55

    4/653

    PLEXO IP 55

    > Rigid conduits or Plexo cable ducts: two solutionsthatsimpliestheinstallation

    process when you deal with weaterproofsurface mounting wiring devices

    Rigid conduits

    Plexo cable ducts

    Rigid conduits: a very simple,

    cost effective solution

    Available on requestPlexo cable ducts: a complete

    system with an improved

    design for a perfect finish

    The membrane of the end-cap

    compensates for anymisalignment of the tube and

    ensures IP 55

    Weatherproof cupling formaintained IP 55

    >Easy to install thanks to the integrated coupling

    >Surface mounting for interior or exterior use

    >Complete range of accessories

    Faster installation,

    guaranted protection

    RIGID CONDUITS FEATURES

    Plexo IP 55 IK 07modular mechanisms

    Pak No. Kat.

    Installation with surface mounting boxes or

    flush mounting support frames

    RJ 45 data socket

    Technical detector

    Adaptors

    1 695 60 RJ 45 cat. 6 - FTP 9 contacts

    Flood detector - IP 41 - IK 071 695 93 Detects the presence of liquid

    at a specific height (according to itsposition)

    For transformer Cat.No 042 25 ormodular power supply Cat.No 042 10Supply voltage : 12 V /Power consumption:

    0.2mAonstand-bymode 20mAinalarmmode

    Supplied complete with sensor and 2m

    length cable

    IP 55 IK 07 for 2 Mosaic modulesCan be equipped with any Mosaic functionin order to obtain an IP 55 wiring deviceexcept Cat.Nos 746 55/47For those functions use Cat.No 695 07without adaptor

    10 695 80 Adaptor with smokedpolycarbonate flap

    Grey/White

    Grey

    Grey

    695 60 695 80

  • 7/30/2019 7 Plexo 55 50 - 55

    5/654

    Automatic terminals for safety and speed

    Pak PakNo. Kat. No. Kat.Surface mounting boxes withmembrane glands

    Flush-mounting support frames

    Equipped with removable membraneglands. Direct entry of cables(No need to be cut)

    1 gang10 696 51 1 entry

    2 and 3 gangNo separation between compartments, inorder to facilitate the cabling operations and

    to allow the installation of pre-wired socketoutlets5 696 72 2 gang, 2 entries

    5 696 61 2 gang, vertical mounting2 entries

    5 696 80 3 gang, horizontal mounting3 entries

    Grey

    Grey

    To be equipped with modular Plexo mechanisms

    The surface mounting boxes are equipped with Nylbloc automatic connection terminals for 2 wires (optional use for junction)

    Surface mounting boxes for cableglands

    5 696 56 1 gang1 entry

    5 696 68 2 gang, vertical mounting2 entries (2 top)

    5 696 78 2 gang, horizontal mounting2 entries (2 top)

    GreyISO 20

    696 51 696 72 696 68 696 85

    Plexo IP 55 IK 07surfacemountingboxesandush-mountingsupportframes

    Used for flush mounting version for Frenchand German standard boxes only

    1 gang10 696 81 For 1 Plexo mechanism

    Can be equipped with clawsCat.No. 849 00 / 01

    2 and 3 gang71 mm fixing centres

    5 696 83 2 gang, for 2 Plexomechanisms, horizontal

    mounting

    5 696 85 2 gang, for 2 Plexomechanisms, verticalmounting

    5 696 87 3 gang, for 3 Plexomechanisms, horizontalmounting

  • 7/30/2019 7 Plexo 55 50 - 55

    6/655

    Plexo IP 55 IK 07surface mounting, supplied complete

    Pak PakNo. Kat. No. Kat.Switches 10 AX - 250 V

    Grey

    Mechanisms supplied complete, with back box and 2 membrane glands. Illuminated functions supplied with 230 V lampsLamps and accessories. Automatic connection

    697 09 697 12 697 33

    Push-buttons 10 A

    IP 55 IK 07

    1 697 19 N/O contact

    1 697 21 Illuminated N/O contact

    Key switches 10 A - 250 V

    IP 20 IK 071 697 06 Key switch for European standard lock

    1 pole, switch/push button3 positions "1-0-2"To be equipped with lockCat.No 696 95 below

    1 697 95 European standard lock

    Supplied with one set of 3 keys

    Movement detectors IP 55

    Allows control of a lighting device as soonas the movement is detectedMaximum load:- 2000 W for incandescent and halogenlamps 230 V and- 2000 W for ELV halogen lamps,- 1000 VA for fluorescent tubes andcompact fluorescent lampsDetection range from 0 to 12 mCoverage pattern adjustable during

    installation processTemporization between 12 s and 16 min.Dim. 90x90x85 mm

    1 697 40 Detection angle : 360

    Plexo has many new improved or ingenious features toaid installation.Like, for example, the four 1/4 turn fastenings,the visible fixing points, etc.

    Plexo adaptors for Mosaic, withor without flap

    All the modular boxes areequipped with an automaticNylbloc connector whena tap-off is required

    Visible and accessible fixingpoints; identical to thePlexo 55

    Locking by means of four1/4 turn fastenings

    Grey

    Grey

    Grey

    Grey

    Socket outlets

    German standard 16 A - 250 V

    10 697 33 2P+ E with earth lateral contactwith screw terminals

    Grey

    Yet more ingenious features

    Cable outlet IP 55 IK 07

    5 Cable outlet supplied with cablegrip

    IP 55 IK 07

    10 697 09 Two-way switch5 697 16 Intermediate switch

    10 697 12 Two-way switch with indicator

    5 697 13 Illuminated two-way switch

    10 697 15 Two-gang two-way switch