Complete Solutions Total Support

Management Team

George Duncan

General Manager

George has over 40 years experience in Marine Engineering including Heat Exchangers. As General Manager of Aberdeen Radiators he covers all aspects of our key client accounts and technical back up for the division.

Jason Sleigh

Heat Transfer Supervisor

Jason in his role of Supervisor of Aberdeen Radiators workshops has a wealth of experience and an excellent rapport with all our client base.

• Consists of 2 state of the art workshops, designed and custom built fit for purpose.

• In-house de-greasing and chemical cleaning tanks, NDT area, oven for debonding and gasket curing, paint bed, over head cranes including 5 point multi crane.

• From light radiators for Heavy Haulage, Plant and Crane Markets, Onshore Radiators for Buildings and factories to main engine, Offshore radiators, plate exchangers and coolers in any application.

• Carry out survey, test, certification, build, refurbish and supply of any radiator, tube & shell cooler or plate exchanger On shore and Offshore.

• Having our Fabrication facility housed within the same building we can offer fast completion times with maximum cost efficiencies and quality control to any refurbishment or build project.

• All geared around maximising turn around time and minimising downtime.

Markets

• Offshore, Marine and Onshore Applications

• Construction, Off Highway and Agricultural Equipment

• Mining and ground works

• Road Sweepers and Grass Cutters

• Armoured Vehicles and Military Equipment

• Static Applications

• Commercial Vehicle, Bus and Coach

• Automotive, Sports Cars & Super Cars

Offshore & Marine

Off Highway, Plant & Construction Applications

Agricultural Applications

Generator & Static Applications

Special Projects

Wind Turbine Applications

Plate Heat Exchangers

• Our purpose built workshop is equipped with the most modern equipment to overhaul any make, model or size of PHEo Chemical cleaning and degreasing tanks

o NDT inspection bay

o Re-gasket Tables and Gasket hanging frames

o De-bonding and curing oven

o Full pressure testing facility

o Certification accredited

• We can offer genuine or non-genuine gaskets and also a full design, supply and refurbishment service

Calorifiers

A full manufacture, re-tube and repair service is offered along with tube bending. Calorifiers are manufactured and re-tubed in a range of materials, from steel through to titanium and with plain or intergron extruded finned tubes. Tubes can be roller expanded, welded or brazed into position depending on duty.

Radiators

We design, manufacture, overhaul and repair the full range of coolers for use in steam, hot water and HVAC in a range of materials from steel, copper, copper nickel, stainless steel and titanium with a choice of aluminium or copper fins.

All types manufactured, repaired, overhauled or modified to customers’ requirements to meet the demands of industrial plant and marine users. We also offer the most advanced radiator designs using plain or multi-louvered, fins to enhance performance and solder dipped cores to give longer service life.

Fan Air Coolers

Shell and Tube

Can be fully designed and manufactured to ASME standards in the full range of materials from copper nickel to titanium. We can also offer a full repair and certification service along with chemical cleaning and NDT testing.

The range of heat exchangers we supply are from the smallest hydraulic unit to the larger process heat exchanger for use on and offshore.

Depending on duty we can offer a range of air blast coolers for the cooling of oil, air or water. This incorporates the latest design and manufacturing of special elfin blocks for charge air coolers to the highly efficient aluminium film block. We also offer a new design of cooler using removable tubes and grommets which eliminate the problems of thermal expansion and vibration whilst also allowing for easier maintenance.

Coolers

Specialist Business SectorDucting Inspection and Cleaning

• Having visibility of contamination and general condition is the first step to maintaining compliance, cleanliness, efficiency and duty of care towards health and best practice, but its what you cant see that always causes the problem.

• Through our knowledge of HVAC and LEV systems both On and Off shore we identified industry needed not just another cleaning system but a system that produces video evidence for records, facilitating good maintenance practice and compliance whilst reducing fire risk and adding comfort to the personnel within a facility but also cleans to the highest standard.

Multi Purpose Robot

The MPR

• Fully automated cleaning

• A cleaning you can see

• Two way camera colour monitor with video recorder

• The fastest and most effective way to clean ducts

• Cleans both round and square ducts

• Tools for coating and disinfecting

Dry Ice Cleaning

Our Dry Ice Blasting technologies can clean the dirtiest, grease laden ducting or galleys in any environment with minimum downtime and virtually no mess and no high volume liquid waste. We cover 99% of sizes and shapes of ducting designs required cleaning and our Dry Ice Blasting technology can clean motor housings and impellors without the need for isolation or masking.

Lance Ice Blasting Robotic Ice Blasting

Dry Ice Cleaning

• Cleans without surface erosion

• Dramatic savings in man hours and hazardous chemicals

• Eliminates potential damage to machine parts

• Eliminates secondary waste streams

• Eliminates personnel exposure to cleaning product corrosives

• Reduces downtime with minimal disassembly

• Eliminates blasting media entrapment and drying time

• Eliminates electrical and bacterial problems

• Reduces overall cleaning time

Unlike conventional blasting methods, sand, bead grit etc., the process is non-abrasive. Dry Ice has a hardness between 1 (Talc) and 2 (Gypsum) on Moh’s Scale of Mineral Hardness.

Bombarding a surface with solid CO2 creates a tension wave between the contaminate and the substrate. Most kinetic energy used to drive the particles to the surface is converted into heat on impact facilitating a rapid phase change from solid to vapour and expanding by a factor of 540x by volume. In this state, the vapours has excellent “wetting” properties and causes the containment to be lifted away from the substrate via surface disruption and rapid sublime.

Before & After

Highlighting the fact that there is no need to strip down machinery

Major Customers

Glasgow Radiator

Becool Radiators / Gallay

G&M Ireland

Aberdeen Radiators

Alutec

G&M Radiator

Where We Are

G&M Radiator Ireland

G&M Radiator

Glasgow Radiator

Aberdeen Radiators

Alutec

Gallay / Becool

SCFM

Group Manufacturing Sites

• G&M Glasgow – Distribution Centre / Radiator production / rapid turnaround / OEM and aftermarket products / distress aluminium products / manufacture for external heat exchange customers and other group companies.

• Aberdeen Radiators – Specialists in Offshore and Onshore Heat Exchange Specialists in repair & overhaul

• Alutec – OEM and aftermarket / aluminium products / stainless and mild steel products

• G&M Ireland – Radiator production / rapid turnaround / aftermarket

• Gallay / Becool – OEM Design / Small Volume Manufacture / High Volume Fabrication, Kitting & Assy / Military Projects

• Glasgow Radiators – Heat Exchange Specialists in repair & overhaul

Thermal Testing

Thermal testing for the Group – in house wind tunnel testing facilities

Part of the