about master modules
DESCRIPTION
Master. UF Hollow Fiber Membrane Modules for Separation and Concentration. About Master Modules. - PowerPoint PPT PresentationTRANSCRIPT
About Master ModulesPHILOSEP Master is UF Membrane Modules that can not only treat general industrial water but also refine wa-
ter with particles matters, separate and concentrate. The Hollow Fiber membranes have an excellent structure
of double layers with fine skin inside and outside which makes them possible to resist in high TMP.
.
Master Operation Scheme
MasterUF Hollow Fiber Membrane Modules for Separation and Concentration
Master UF Modules are operated in compressive filtration method. Dead-end filtration will be used when drain water has low turbidity or when the pre-treatment did not go well. Stable Permeation rate can be acquired in a long-term through periodical Back-wash and Flushing.Furthermore, Cross-flow method is also possible when turbidity or drain water is or higher than 15 NTU.
Applications of
Master Modules Industrial Water Treatment Pretreatment of RO Ion Exchange Resin Process
Pre-treatment Water Reuse Factory Wastewater Treatment
Contaminant-resist Hydrophilic PES
Stable and Constant Flow rate
High physical Strength with the Sponge structure
Excellent Heat-resistance
Excellent Chemical-resistance (pH 2~12)
Features of PES Hollow Fiber Membranes
Master Flow diagram
Features of Master Modules
1. Excellent Permeation rate and Stability of Water Quality
Hydrophilic PES membranes in PHILOSEP SCAF modules have very even pores. They are used in water
treatment or pure water manufacturing process where the stable water quality is necessity
2. Stable Supply of Filtered Water
Repeating filtering and Back-washing supplies water to RO system more stably compare to Media filtering
which has to be paused for a long time for a Back- wash
Item Master 6
Performance
Filtration Capacity
Filterer Water SDI
2.6 ~ 6.6 GPM (0.6 ~ 1.5 m3/hr ) < 4 (When Turbidity of Drain Water<15
NTU)
Separation Membranes
Materials
MWCO
Area
Polyethersulfone (PES)100,000 Daltons161.5 ft2 (15 m2)
Operation Data
Designed Flux
Max. Inlet Pressure
Normal Operation Pressure
Max. Operation Pressure
Max. Inlet Turbidity
Max. Operation Temperature
Dead end Filtration
Cross Flow Filtration
pH range
20 ~ 50 GFD (40 ~ 100 L/m2·h)43.5 psig (3 kg/cm2)4 ~ 14.7 psig (0.3 ~ 1.0 kg/cm2)< 22 psig (1.5 kg/cm2)30 NTU104 ℉ (40 ℃)< 15 NTU> 15 NTU2.0 ~ 12.0
Module Size
Module Weight (When Dry)
Φ6 inch x L70 inch18kg
Master Module Specification