accelerated testing bsi - tisilibrary.tisi.go.th/downloadable/new_release/47_jul-sep56.pdf · iec...

รายชื่อเอกสารใหม่ (กรกฎาคม-กันยายน 2556) หน้า 1

รายชื่อเอกสารใหม่ (กรกฎาคม-กันยายน 2556)

ACCELERATED TESTING BSI

BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011.

IEC

IEC 60068-2-65 2013 Environmental testing - P.2-65: Tests - Test Fg: Vibration - Acoustically induced method /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

ACCURACY IEC

IEC 60068-2-55 2013 Environmental testing - P.2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

ACOUSTIC EQUIPMENT

IEC

IEC 60268-3 2013 Sound system equipment - P.3: Amplifiers /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2013.

ACOUSTIC MEASUREMENT IEC

IEC 61689 2013 Ultrasonic - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.


ISO

ISO 3745 2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

ACOUSTIC TESTING IEC


ACOUSTICS ISO

ISO 3745 2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

ISO 10140-2 2010 Acoustics - Laboratory measurement of sound insulation of building elements P.2: Measurement of airborne sound insulation /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ADHESION ISO

ISO 36 2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2011.

ADHESION TESTS ISO



AGGREGATES BSI

BS EN 1423 2013 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2012.

AIR - ANALYSIS ISO

ISO 16358-1 2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - P.1: Cooling seasonal performance factor /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

AIR CONDITIONERS ISO


ISO 16358-2 2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - P.2: Heating seasonal performance factor /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ISO 16358-3 2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - P.3: Annual performance factor /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

AIR POLLUTION IEC

IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for electrical and electronic products and systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


AIRBORNE SOUND INSULATION ISO


AIRCRAFT COMPONENTS BSI

BS EN 4614 2009 Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2009.

ALARM SYSTEMS IEC

IEC 60839-11-1 2013 Alarm and electronic security systems - P.11-1: Electronic access control systems - System and components requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ALLOYS IEC

IEC 60404-8-4 2013 Magnetic materials - P.8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

AMPLIFIERS IEC



IEC 61280-1-1 2013 Fibre optic communication subsystem basic test procedures - P.1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

ANAESTHETIC EQUIPMENT ISO ISO 5361 2012 Anaesthetic and respiratory equipment - Tracheal tubes and connectors /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2012.

ANEMOMETERS IEC IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind

turbines based on nacelle anemometry /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ANIMAL FEED ISO ISO 6498 2012 Animal feeding stuffs - Guidelines for sample preparation /By International

Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

ISO/TS 6579-2 2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of salmonella - P.2: Enumeration by a miniaturized most probable number technique /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the application of near infrared spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO/TS 13136 2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


ANTI-BURGLAR MEASURES BSI

BS EN 1630 2011 Pedestrian door sets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011.

BS EN 1906 2012 Building hardware - Lever handles and knob furniture - Requirements and test methods /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2012.

ISO

ISO/IEC 29115 2013 Information technology - Security techniques - Entity authentication assurance framework /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2013.

ANTI-SLIP SURFACES BSI BS EN 1423 2013 Road marking materials - Drop on materials - Glass beads, antiskid

aggregates and mixtures of the two /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2012.

APPROVAL TESTING IEC IEC 60127-7 2013 Miniature fuses - P.7: Miniature fuse-links for special applications /By

International Electrotechnical Commission (IEC). Geneva: IEC, 2013. IEC/PAS 62814 2012 Dependability of software products containing reusable components -

Guidance for functionality and tests /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

AQUARIA (ORNAMENTAL) IEC

IEC 60598-2-11 2013 Luminaires - P.2-11: Particular requirements - Aquarium luminaires /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


ARC-WELDING EQUIPMENT IEC IEC 60974-5 2013 Are welding equipment - P.5: Wire feeders /By International Electrotechnical

Commission (IEC). 3rd ed. Geneva: IEC, 2013.

ASSESSED QUALITY IEC IEC 62246-1-1 2013 Reed switches - P.1-1: Generic specification - Quality assessment /By

International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ATMOSPHERE IEC IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for

electrical and electronic products and systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ATOMIC ABSORPTION SPECTROMETRIC METHOD ISO ISO 6101-6 2011 Rubber - Determination of metal content by atomic absorption spectrometry -

P.6: Determination of magnesium content /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

ATTENUATION IEC IEC 61587-3 2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and

IEC 60297 - P.3: Electromagnetic shielding performance tests for cabinets and subracks /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

ATTENUATORS IEC IEC 61753-051-3 2013 Fibre optic interconnecting devices and passive components -

Performance standard - P.051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


AUDIO AMPLIFIERS IEC


AUDIO EQUIPMENT IEC IEC 60268-3 2013 Sound system equipment - P.3: Amplifiers /By International Electrotechnical

Commission (IEC). 4th ed. Geneva: IEC, 2013.

AUDIO SYSTEMS IEC IEC 60268-3 2013 Sound system equipment - P.3: Amplifiers /By International Electrotechnical

Commission (IEC). 4th ed. Geneva: IEC, 2013.

AUDITING ISO ISO/IEC TS 17021-2 2012 Conformity assessment - Requirements for bodies providing audit

and certification of management systems - P.2: Competence requirements for auditing and certification of environmental management systems /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2012.

AUSTENITIC STEELS BSI BS EN 10088-4 2009 Stainless steels - P.4: Technical delivery conditions for sheet/plate and

strip of corrosion resisting steels for construction purposes /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2009.

AUTHENTICATION ISO ISO 12931 2012 Performance criteria for authentication solutions used to combat counterfeiting

of material goods /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


AUTOMATIC CONTROL SYSTEMS IEC

IEC 60848 2013 GRAFCET specification language for sequential function charts /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

IEC 61131-3 2013 Programmable controllers - P.3: Programming languages /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

IEC 61850-5 2013 Communication networks and systems for power utility automation - P.5: Communication requirements for functions and device models /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC/TR 61850-90-7 2013 Communication networks and systems for power utility automation - P.90-7: Object models for power converters in distributed energy resources (DER) systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC/TR 62541-1 2010 OPC Unified Architecture - P.1: Overview and Concepts /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

IEC 62264-1 2013 Enterprise-control system integration - P.1: Models and terminology /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

AUTOMOTIVE FUELS ISO

ISO 20846 2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

AUTOTRANSFORMERS IEC

IEC/TS 60076-19 2013 Power transformers - P.19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


BEADS BSI BS EN 1423 2013 Road marking materials - Drop on materials - Glass beads, antiskid


BEND TESTING IEC IEC 61300-2-7 2013 Fibre optic interconnecting devices and passive components - Basic test

and measurement procedures - P.2-7: Tests - Bending moment /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

BLOCK DIAGRAMS IEC IEC/TS 62771 2012 Information model covering the contents of IEC 81346-1 and IEC 81346-2,

IEC 61175, IEC 61666 and IEC 81714-3 /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

BOLTS BSI BS EN 16014 2011 Hardware for furniture - Strength and durability of locking mechanisms /By

British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011.

Bores ISO ISO 80369-1 2010 Small-bore connectors for liquids and gases in healthcare applications - P.1:

General requirements /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

BRAKING SYSTEMS ISO ISO 27667 2011 Road vehicles - Brake lining friction materials - Evaluation of corrosion effects

on painted backing plates and brake shoes /By International Organization for Standardization (ISO). Geneva: ISO, 2011.


BRAZING ISO

ISO 13585 2012 Brazing - Qualification test of brazers and brazing operators /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

BREAKING CAPACITY IEC

IEC 60127-7 2013 Miniature fuses - P.7: Miniature fuse-links for special applications /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

BROADCASTING IEC

IEC 62516-3 2013 Terrestrial digital multimedia broadcasting (T-DMB) receivers - P.3: Common API /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC 62553 2012 Methods of measurement for digital network - Performance characteristics of terrestrial digital multimedia transmission network /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

BROADCASTING NETWORKS IEC


IEC 62698 2013 Multimedia home server systems - Rights information interoperability for IPTV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

BUILDINGS ISO

ISO/TS 29584 2012 Glass in building - Pendulum impact testing and classification of safety glass for use in buildings /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


BUS NETWORKS IEC IEC/TR 62541-1 2010 OPC Unified Architecture - P.1: Overview and Concepts /By International

Electrotechnical Commission (IEC). Geneva: IEC, 2010.

CALCULATION CHECKS ISO ISO 13579-1 2013 Industrial furnaces and associated processing equipment - Method of

measuring energy balance and calculating efficiency - P.1: General methodology /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ISO 13579-2 2013 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency - P.2: Reheating furnaces for steel /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ISO 13579-3 2013 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency - P.3: Batch-type aluminium melting furnaces /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ISO 13579-4 2013 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency - P.4: Furnaces with protective or reactive atmosphere /By International Organization for Standardization (ISO). Geneva: ISO, 2013.


CALIBRATION ISO ISO 3567 2011 Vacuum gauges - Calibration by direct comparison with a reference gauge /By

International Organization for Standardization (ISO). Geneva: ISO, 2011.

CAPACITORS IEC IEC 60549 2013 High-voltage fuses for the external protection of shunt capacitors /By

International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


CEREAL FOOD PRODUCTS BSI BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-

Infrared-Spectroscopy in whole kernels /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2012.

CEREAL PRODUCTS BSI BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-


ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the

application of near infrared spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

CEREALS BSI BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-


ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the

application of near infrared spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

CERTIFICATION ISO

ISO/IEC TS 17021-2 2012 Conformity assessment - Requirements for bodies providing audit and certification of management systems - P.2: Competence requirements for auditing and certification of environmental management systems /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2012.


CHAIRS ISO ISO 6875 2011 Dentistry - Patient chair /By International Organization for Standardization (ISO).

3rd ed. Geneva: ISO, 2011.

CHARTS IEC IEC 60848 2013 GRAFCET specification language for sequential function charts /By

International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

CHEMICAL ANALYSIS AND TESTING BSI BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester

(FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011.

IEC IEC 62321-1 2013 Determination of certain substances in electrotechnical products - P.1:

Introduction and overview /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

CHEMICAL-RESISTANCE TESTS BSI BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester


CIRCUIT DIAGRAMS IEC IEC 61747-2-1 2013 Liquid crystal display devices - P.2-1: Passive matrix monochrome LCD

modules - Blank detail specification /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


IEC/TS 62771 2012 Information model covering the contents of IEC 81346-1 and IEC 81346-2, IEC 61175, IEC 61666 and IEC 81714-3 /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

CIRCUITS IEC IEC/TS 62771 2012 Information model covering the contents of IEC 81346-1 and IEC 81346-2, IEC

61175, IEC 61666 and IEC 81714-3 /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

CLASSIFICATION SYSTEMS IEC IEC/TS 62768 2012 Preparation and processing of source definitions for data element types -

Guidelines for product committees /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

CLEARANCE DISTANCES IEC IEC 62497-1 2010 Railway applications - Insulation coordination - P.1: Basic requirements -

Clearances and creepage distances for all electrical and electronic equipment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

CLIMATE IEC IEC 60749-26 2013 Semiconductor devices - Mechanical and climatic test methods - P.26:

Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.


CLIMATOLOGY IEC IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for



CLINICAL INVESTIGATION INSTRUMENTS IEC

IEC 60601-2-33 2010 Medical electrical equipment - P. 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

COATED FABRICS ISO


COAXIAL CONNECTORS IEC

IEC 61169-43 2013 Radio-frequency connectors - P.43: Sectional specification for RBMA series blind mating RF coaxial connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

CODED REPRESENTATION IEC IEC 62056-6-1 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.6-1:

Object ldentification System (OBIS) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

CODES IEC IEC/TS 62771 2012 Information model covering the contents of IEC 81346-1 and IEC 81346-2,


CODING (DATA CONVERSION) ISO IEC 62056-7-6 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.7-6: The

3-layer, connection-oriented HDLC based communication profile /By International Electrotechnical Commission (IEC). Geneva: ISO, 2013.


COMMUNICATION EQUIPMENT IEC

IEC 62488-1 2012 Power line communication systems for power utility applications - P.1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.


IEC/TR 61282-10 2013 Fibre optic communication system design guides - P.10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

COMMUNICATION NETWORKS IEC

IEC/TR 61850-1 2013 Communication networks and systems for power utility automation - P.1: Introduction and overview /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.



IEC 62056-8-3 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.8-3: Communication profile for PLC S-FSK neighbourhood networks /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.



IEC/TR 80001-2-1 2012 Application of risk management for IT-networks incorporating medical devices - P.2-1: Step-by-step risk management of medical IT-networks - Practical applications and examples /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

IEC/TR 80001-2-2 2012 Application of risk management for IT-networks incorporating medical devices - P.2-2: Guidance for the disclosure and communication of medical device security needs, risks and controls /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

IEC/TR 80001-2-3 2012 Application of risk management for IT-networks incorporating medical devices - P.2-3: Guidance for wireless networks /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

IEC/TR 80001-2-4 2012 Application of risk management for IT-networks incorporating medical devices - P.2-4: Application guidance - General implementation guidance for healthcare delivery organizations /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

COMMUNICATION TECHNOLOGY IEC IEC 61300-3-50 2013 Fibre optic interconnecting devices and passive components - Basic test

and measurement procedures - P.3-50: Examinations and measurements - Crosstalk for optical spatial switches /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

COMPATIBILITY IEC IEC 60204-31 2013 Safety of machinery - Electrical equipment of machines - P.31: Particular

safety and EMC requirements for sewing machines, units and systems /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2013.

COMPONENTS IEC

IEC 61753-058-2 2013 Fibre optic interconnecting devices and passive components - Performance standard - P.058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


COMPOSITE MATERIALS IEC

IEC 61212-3-2 2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - P.3: Specifications for individual materials - sheet 2: Round laminated moulded tubes /By International Electrotechnical Commission (IEC). 3 rd ed. Geneva: IEC, 2013.

IEC 61788-5 2013 Superconductivity - P.5: Martrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

COMPUTER APPLICATIONS IEC

IEC/TR 62780 2012 Multimedia systems and equipment - Multimedia e-publishing and e-book - Guideline for protection against mechanical stress during distribution of e-books in CD and DVD media /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

COMPUTER HARDWARE ISO

IEC 62056-7-6 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.7-6: The 3-layer, connection-oriented HDLC based communication profile /By International Electrotechnical Commission (IEC). Geneva: ISO, 2013.

COMPUTER NETWORKS IEC IEC 61753-088-2 2013 Fibre optic interconnecting devices and passive components -

Performance standard - P.088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.







COMPUTER PROGRAMS IEC IEC 61710 2013 Power law model - Goodness-of-fit tests and estimation methods /By


IEC 61970-456 2013 Energy management system application program interface (EMS-API) - P.456: Solved power system state profiles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ISO ISO/IEC TR 29110-3 2011 Software engineering - Lifecycle profiles for Very Small Entities

(VSEs) - P.3: Assessment guide /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2011.

COMPUTER SOFTWARE IEC IEC/PAS 62814 2012 Dependability of software products containing reusable components -




ISO

ISO/IEC TR 29110-3 2011 Software engineering - Lifecycle profiles for Very Small Entities (VSEs) - P.3: Assessment guide /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2011.

COMPUTER TECHNOLOGY ISO


COMPUTERIZED CONTROL IEC

IEC 62671 2013 Nuclear power plants - Instrumentation and control important to safety - Selection and use of industrial digital devices fo limited functionality /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

COMPUTERS ISO


CONDUITS (HYDRAULIC) ISO

ISO 12242 2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


CONFORMITY ASSESSMENT ISO

ISO/IEC TS 17021-2 2012 Conformity assessment - Requirements for bodies providing audit and certification of management systems - P.2: Competence requirements for auditing and certification of environmental management systems /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2012.

CONNECTORS ISO ISO 80369-1 2010 Small-bore connectors for liquids and gases in healthcare applications - P.1:

General requirements /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

CONSTRUCTION MATERIALS BSI BS EN 1423 2013 Road marking materials - Drop on materials - Glass beads, antiskid


CONSTRUCTION SYSTEMS PARTS BSI BS EN 1630 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar

resistance - Test method for the determination of resistance to manual burglary attempts /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011.


CONSUMER-SUPPLIER RELATIONS IEC IEC 82079-1 2012 Preparation of instructions for use - Structuring, content and presentation -

P.1: General principles and detailed requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.


CONTRACTS IEC

IEC 82079-1 2012 Preparation of instructions for use - Structuring, content and presentation - P.1: General principles and detailed requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

CONTROL CHARTS ISO

ISO 7870-2 2013 Control charts - P.2: Shewhart control charts /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ISO 7870-4 2011 Control charts - P.4: Cumulative sum charts /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

CONTROL DEVICES IEC

IEC 61010-1 2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.1: General requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

IEC/TR 62794 2012 Industrial-process measurement, control and automation - Reference model for representation of production facilities (digital factory) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

CONTROL EQUIPMENT IEC





CONTROL SYSTEMS IEC IEC 60848 2013 GRAFCET specification language for sequential function charts /By

International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013. IEC 61131-3 2013 Programmable controllers - P.3: Programming languages /By International

Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013. IEC 61968-11 2013 Application integration at electric utilities - System interfaces for distribution

management - P.11: Common information model (CIM) extensions for distribution /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

CONTROLLERS IEC IEC 61131-3 2013 Programmable controllers - P.3: Programming languages /By International

Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

COOKING APPLIANCES ISO IWA 11 2012 Guidelines for evaluating cookstove performance /By International Organization for

Standardization (ISO). Geneva: ISO, 2012.

CORROSION RESISTANCE BSI BS EN 1906 2012 Building hardware - Lever handles and knob furniture - Requirements and

test methods /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2012.


COUPLED CIRCUITS IEC IEC 61300-2-7 2013 Fibre optic interconnecting devices and passive components - Basic test

and measurement procedures - P.2-7: Tests - Bending moment /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

CREEP ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under

constant elongation, and of tension set, elongation and creep under constant tensile load /By International Organization for Standardization (ISO). 7th ed. Geneva: ISO, 2013.

CRIME PREVENTION DEVICES BSI

BS EN 1630 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011.

IEC


IEC 62618 2013 Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

CRYSTAL FILTERS IEC

IEC 60368-1 2013 Piezoelectric filters of assessed quality - P.1: Generic specification /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2013.


CURTAIN WALLING BSI


DANGEROUS MATERIALS IEC

IEC 62321-1 2013 Determination of certain substances in electrotechnical products - P.1: Introduction and overview /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

DATA IEC

IEC/TS 62768 2012 Preparation and processing of source definitions for data element types - Guidelines for product committees /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

DATA ELEMENTS IEC


DATA HANDLING IEC

IEC 60255-24 2013 Measuring relays and protection equipment - P.24: Common format for transient data exchange (COMTRADE) for power systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC 62056-6-1 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.6-1: Object ldentification System (OBIS) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC 62056-6-2 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.6-2: COSEM interface classes /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.



DATA PROCESSING IEC







ISO



DATA PROCESSING EQUIPMENT ISO


DATA RECORDING IEC

IEC 61996-1 2013 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - P.1: Performance requirements, methods of testing and required test results /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

DATA REPRESENTATION IEC


IEC 62683 2013 Low-voltage switchgear and controlgear - Product data and properties for information exchange /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.



DATA SECURITY IEC




IEC/TR 80001-2-2 2012 Application of risk management for IT-networks incorporating medical devices - P.2-2: Guidance for the disclosure and communication of medical device security meeds, risks and controls /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.



ISO


DATA STORAGE PROTECTION ISO


DATA TRANSFER IEC

IEC 61968-11 2013 Application integration at electric utilities - System interfaces for distribution management - P.11: Common information model (CIM) extensions for distribution /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.









ISO



DATA TRANSMISSION IEC





DENTAL EQUIPMENT ISO

ISO 6875 2011 Dentistry - Patient chair /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2011.

DENTISTRY ISO

ISO 7494-1 2011 Dentistry - Dental units - P.1: General requirements and test methods /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

DESIGN IEC



IEC/TR 62785 2013 Guidance on the environmentally conscious design of fibre optics related products and subsystems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

DESIGNATIONS IEC IEC/TS 62771 2012 Information model covering the contents of IEC 81346-1 and IEC 81346-2,


DESTRUCTIVE TESTING ISO ISO 4136 2012 Destructive tests on welds in metallic materials - Transverse tensile test /By

International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

DETECTORS IEC IEC 61275 2013 Radiation protection instrumentation - Measurement of discrete radionuclides

in the environment - In situ photon spectrometry system using a germanium detector /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


DETERMINATION OF CONTENT IEC IEC 62321-1 2013 Determination of certain substances in electrotechnical products - P.1:

Introduction and overview /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

DIAGNOSIS (MEDICAL) IEC IEC 60601-2-33 2010 Medical electrical equipment - P. 2-33: Particular requirements for the

basic safety and essential performance of magnetic resonance equipment for medical diagnosis /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.


DIAGRAMS IEC


DIAMETER MEASUREMENT IEC

IEC 61300-3-49 2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

DIESEL FUELS BSI BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester


DIGITAL AUDIO BROADCASTING IEC IEC 62516-3 2013 Terrestrial digital multimedia broadcasting (T-DMB) receivers - P.3: Common

API /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013. IEC 62553 2012 Methods of measurement for digital network - Performance characteristics of

terrestrial digital multimedia transmission network /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

DIGITAL SIGNALS IEC IEC 62516-3 2013 Terrestrial digital multimedia broadcasting (T-DMB) receivers - P.3: Common

API /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


DIGITAL VIDEO BROADCASTING IEC IEC 62516-3 2013 Terrestrial digital multimedia broadcasting (T-DMB) receivers - P.3: Common

API /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

DIMENSIONS ISO ISO 3394 2012 Packaging - Complete, filled transport packages and unit loads - Dimensions of

rigid rectangular packages /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

DISCHARGE LAMPS IEC IEC 60598-2-8 2013 Luminaires - P.2-8: Particular requirements - Handlamps /By International


IEC 60598-2-12 2013 Luminaires - P.2-12: Particular requirements - Mains socket-outlet mounted nightlights /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

DISPLAY DEVICES IEC IEC 61747-2-1 2013 Liquid crystal display devices - P.2-1: Passive matrix monochrome LCD

modules - Blank detail specification /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC 62629-22-1 2013 3D display devices - P.22-1: Measuring methods for autostereoscopic displays - Optical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

DISPLAY DEVICES (COMPUTERS) IEC IEC 62287-1 2010 Maritime navigation and radiocommunication equipment and systems - Class

B shipborne equipment of the automatic identification system (AIS) - P. 1: Carrier-sense time division multiple access (CSTDMA) techniques /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.


DOCUMENTS IEC


DOMESTIC ELECTRICAL INSTALLATIONS BSI

BS EN 50522 2010 Earthing of power installations exceeding 1 kV a.c. /By British Standards Institution (BSI) and European Committee for Electrotechnical Standardization (CENELEC). London: BSI, 2010.

DOORS BSI



DRAWINGS IEC


ISO

ISO 3573 2012 Hot-rolled carbon steel sheet of commercial and drawing qualities /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2012.


ISO 3574 2012 Cold-reduced carbon steel sheet of commercial and drawing qualities /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2012.

ISO 3575 2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2011.

DRILLING (MINERAL EXTRACTION) IEC

IEC 61892-2 2012 Mobile and fixed offshore units - Electrical installations - P.2: System design /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2012.

DRILLING RIGS IEC


DURABILITY BSI BS EN 16014 2011 Hardware for furniture - Strength and durability of locking mechanisms /By


E-BOOKS IEC IEC/TR 62780 2012 Multimedia systems and equipment - Multimedia e-publishing and e-book -

Guideline for protection against mechanical stress during distribution of e-books in CD and DVD media /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

E-PUBLISHING IEC



EARTH ELECTRODES BSI BS EN 50522 2010 Earthing of power installations exceeding 1 kV a.c. /By British Standards

Institution (BSI) and European Committee for Electrotechnical Standardization (CENELEC). London: BSI, 2010.

EARTH MOVING EQUIPMENT ISO ISO 21338 2010 Water quality - Kinetic determination of the inhibitory effects of sediment, other

solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

EARTHING BSI BS EN 50522 2010 Earthing of power installations exceeding 1 kV a.c. /By British Standards Institution

(BSI) and European Committee for Electrotechnical Standardization (CENELEC). London: BSI, 2010.

EDUCATIONAL EQUIPMENT IEC IEC/TS 62850 2013 Safety requirements for electrical equipment for measurement, control, and

laboratory use - General requirements for equipment intended to be used in educational establishments by children /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

EDUCATIONAL FACILITIES IEC IEC/TS 62850 2013 Safety requirements for electrical equipment for measurement, control, and

laboratory use - General requirements for equipment intended to be used in educational establishments by children /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ELECTRIC CONNECTORS IEC

IEC 60512-28-100 2013 Connectors for electronic equipment - Tests and measurements - P.28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


IEC 61300-2-7 2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.2-7: Tests - Bending moment /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


IEC 61753-059-2 2013 Fibre optic interconnecting devices and passive components - Performance standard - P.059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC 61754-27 2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - P.27: Type M12-FO connector family /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


ELECTRIC CONTACTS IEC

IEC 62246-1-1 2013 Reed switches - P.1-1: Generic specification - Quality assessment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ISO

IEC 62246-1 2011 Reed switches - P. 1: Generic specification /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: ISO, 2011.

ELECTRIC CONTROL EQUIPMENT IEC

IEC 61010-2-201 2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-201: Particular requirements for control equipment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.



IEC 61326-3-1 2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - P.3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications /By International Electrotechnical Commission (IEC). Geneva: IEC, 2008.

IEC 62271-109 2008 High-voltage switchgear and controlgear - P.109: Alternating-current series capacitor by-pass switches /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2008.

IEC/TS 62271-210 2013 High-voltage switchgear and controlgear - P.210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC/TS 62850 2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ELECTRIC CONVERTORS IEC

IEC/TR 60919-1 2010 Performance of high-voltage direct current (HVDC) systems with line-commutated converters - P. 1: Steady-state conditions /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

ELECTRIC CURRENT IEC

IEC 61083-2 2013 Instruments and software used for measurement in high-voltage and high-current tests - P.2: Requirements for software for tests with impulse voltages and currents /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


ELECTRIC GENERATORS BSI


IEC IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind


ELECTRIC HEATERS IEC IEC 60335-2-21 2012 Household and similar electrical appliances - Safety - P.2-21: Particular

requirements for storage water heaters /By International Electrotechnical Commission (IEC). 6th ed. Geneva: IEC, 2012.

IEC 60519-10 2013 Safety in electroheating installations - P.10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

ELECTRIC LAMPS IEC IEC 60598-2-8 2013 Luminaires - P.2-8: Particular requirements - Handlamps /By International

Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013. IEC 60598-2-12 2013 Luminaires - P.2-12: Particular requirements - Mains socket-outlet

mounted nightlights /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

ELECTRIC PLUGS IEC IEC 61753-059-2 2013 Fibre optic interconnecting devices and passive components -

Performance standard - P.059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


ELECTRIC POWER DISTRIBUTION IEC IEC 61850-5 2013 Communication networks and systems for power utility automation - P.5:

Communication requirements for functions and device models /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


IEC 62271-109 2008 High-voltage switchgear and controlgear - P.109: Alternating-current series capacitor by-pass switches /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2008.

ELECTRIC POWER GENERATION IEC


ELECTRIC POWER NETWORKS BSI


IEC




ELECTRIC POWER STATIONS BSI


ELECTRIC POWER SYSTEM DISTURBANCES

IEC

IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - P.3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - P.4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

ELECTRIC POWER SYSTEMS BSI



IEC


IEC 60255-26 2013 Measuring relays and protection equipment - P.26: Electromagnetic compatibility requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.




IEC 62287-1 2010 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - P. 1: Carrier-sense time division multiple access (CSTDMA) techniques /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2010.

IEC 62287-2 2013 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - P.2: Self-organising time division multiple access (SOTDMA) techniques /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


ELECTRIC POWER TRANSMISSION IEC

IEC 61156-8 2009 Multicore and symmetrical pair/quad cables for digital communications - P.8: Symmetrical pair/quad cables with transmission characteristics to 1 200 MHz - Work area wiring - Sectional specification /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.




ELECTRIC POWER TRANSMISSION LINES

IEC


ELECTRIC SCREENS

IEC

IEC 61587-3 2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - P.3: Electromagnetic shielding performance tests for cabinets and subracks /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


ELECTRIC SOCKETS IEC


ELECTRIC SUBSTATIONS IEC

IEC/TR 61850-1 2013 Communication networks and systems for power utility automation - P.1: Introduction and overview /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.



ELECTRICAL COMPONENTS IEC IEC 60068-2-55 2013 Environmental testing - P.2-55: Tests - Test Ee and guidance - Loose cargo

testing including bounce /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013. IEC 60068-2-57 2013 Environmental testing - P.2-57: Tests - Test Ff: Vibration - Time-history and

sine-beat method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013. IEC 60068-2-65 2013 Environmental testing - P.2-65: Tests - Test Fg: Vibration - Acoustically

induced method /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013. IEC 60255-26 2013 Measuring relays and protection equipment - P.26: Electromagnetic

compatibility requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

IEC 60286-3 2013 Packaging of components for automatic handling - P.3: Packaging of surface mount components on continuous tapes /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2013.



IEC 60695-2-10 2013 Fire hazard testing - P.2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC/TS 60695-6-30 2013 Fire hazard testing - P.6-30: Smoke obscuration - Small-scale static method - Apparatus /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC 60695-9-1 2013 Fire hazard testing - P.9-1: Surface spread of flame - General guidance /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.


IEC 60913 2013 Railway applications - Fixed installations - Electric traction overhead contact lines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.



IEC 61747-2-1 2013 Liquid crystal display devices - P.2-1: Passive matrix monochrome LCD modules - Blank detail specification /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.





ELECTRICAL CONNECTIONS IEC



ELECTRICAL ENGINEERING IEC

IEC 60695-11-10 2013 Fire hazard testing - P.11-10: Test flames - 50 W horizontal and vertical flame test methods /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.



IEC 62068 2013 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


IEC 62497-1 2010 Railway applications - Insulation coordination - P.1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.


ELECTRICAL EQUIPMENT BSI


IEC IEC 60068-2-55 2013 Environmental testing - P.2-55: Tests - Test Ee and guidance - Loose

cargo testing including bounce /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC 60068-2-57 2013 Environmental testing - P.2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.



IEC 60204-31 2013 Safety of machinery - Electrical equipment of machines - P.31: Particular safety and EMC requirements for sewing machines, units and systems /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2013.










IEC 61212-3-2 2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - P.3: Specifications for individual materials - sheet 2: Round laminated moulded tubes /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.



ISO IEC 62056-7-6 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.7-6: The

3-layer, connection-oriented HDLC based communication profile /By International Electrotechnical Commission (IEC). Geneva: ISO, 2013.



ELECTRICAL HEATING ELEMENTS IEC IEC 60519-10 2013 Safety in electroheating installations - P.10: Particular requirements for

electrical resistance trace heating systems for industrial and commercial applications /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC 60519-12 2013 Safety in electroheating installations - P.12: Particular requirements for infrared electroheating installations /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ELECTRICAL HOUSEHOLD APPLIANCES IEC IEC 60335-2-21 2012 Household and similar electrical appliances - Safety - P.2-21: Particular


ELECTRICAL IMPEDANCE IEC IEC/TS 60076-19 2013 Power transformers - P.19: Rules for the determination of uncertainties in

the measurement of the losses on power transformers and reactors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.



ELECTRICAL INSTALLATIONS IEC

IEC 60364-7-713 2013 Low-voltage electrical installations - P.7-713: Requirements for special installations or locations - Furniture /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.



ELECTRICAL INSULATING MATERIALS IEC

IEC 60216-1 2013 Electrical insulating materials - Thermal endurance properties - P.1: Ageing procedures and evaluation of test results /By International Electrotechnical Commission (IEC). 6 th ed. Geneva: IEC, 2013.

IEC 60216-8 2013 Electrical insulating materials - Thermal endurance properties - P.8: Instructions for calculating thermal endurance characteristics using simplified procedures /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC 60243-1 2013 Electric strength of insulating materials - Test methods - P.1: Tests at power frequencies /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

IEC 60455-3-8 2013 Resin based reactive compounds used for electrical insulation - P.3: Specifications for individual materials - Sheet 8: Resins for cable accessories /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.



IEC 61189-11 2013 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - P.11: Measurement of melting temperature or melting temperature ranges of solder alloys /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ELECTRICAL INSULATION IEC

IEC 60099-5 2013 Surge arresters - P.5: Selection and application recommendations /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC 2013.

IEC 60455-3-8 2013 Resin based reactive compounds used for electrical insulation - P.3: Specifications for individual materials - Sheet 8: Resins for cable accessories /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC 61212-3-1 2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - P.3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.





ELECTRICAL MEASUREMENT IEC CISPR 16-4-2 2011 Specification for radio disturbance and immunity measuring apparatus and

methods - P. 4-2: Uncertainties, statistics and limit modeling - Measurement instrumentation uncertainty /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.

CISPR/TR 31 2012 Database on the characteristics of radio services /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2012.




IEC 62056-8-3 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.8-3: Communication profile for PLC S-FSK neighborhood networks /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

ELECTRICAL MEASURING INSTRUMENTS IEC

CISPR 16-4-2 2011 Specification for radio disturbance and immunity measuring apparatus and methods - P. 4-2: Uncertainties, statistics and limit modeling - Measurement instrumentation uncertainty /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.




ELECTRICAL MEDICAL EQUIPMENT IEC


ELECTRICAL PROPERTIES AND PHENOMENA IEC


ELECTRICAL PROTECTION EQUIPMENT BSI


IEC





ELECTRICAL RESISTANCE BSI


IEC


ELECTRICAL RESISTIVITY BSI


ELECTRICAL SAFETY BSI


IEC



IEC 60335-2-21 2012 Household and similar electrical appliances - Safety - P.2-21: Particular requirements for storage water heaters /By International Electrotechnical Commission (IEC). 6th ed. Geneva: IEC, 2012.







ELECTRICAL TESTING IEC

IEC 60749-26 2013 Semiconductor devices - Mechanical and climatic test methods - P.26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.




IEC 61753-051-3 2013 Fibre optic interconnecting devices and passive components - Performance standard - P.051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

IEC 61954 2011 Static var compensators (SVC) - Testing of thyristor valves /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.

ELECTRICAL TOLERANCES IEC


ELECTRICAL WAVE MEASUREMENT IEC





ELECTRICALLY-OPERATED DEVICES IEC



ELECTRICITY SUPPLY METERS IEC




ELECTROMAGNETIC COMPATIBILITY IEC




ELECTROMAGNETIC COMPATIBILITY (EMC) IEC





ELECTROMAGNETIC FIELDS IEC


IEC




ELECTROMAGNETIC RADIATION IEC






ELECTROMECHANICAL DEVICES IEC


ELECTRONIC EQUIPMENT AND COMPONENTS IEC








IEC 60469 2013 Transitions, pulses and related waveforms - Terms, definitions and algorithms /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.












IEC 61191-1 2013 Printed board assemblies - P.1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.



IEC 61300-2-52 2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.2-52: Test - bending test for cords /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.




IEC 61710 2013 Power law model - Goodness-of-fit tests and estimation methods /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.










IEC/PAS 62814 2012 Dependability of software products containing reusable components - Guidance for functionality and tests /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.


ELECTROSTATICS IEC IEC 60749-26 2013 Semiconductor devices - Mechanical and climatic test methods - P.26:


IEC/TR 61340-1 2012 Electrostatics - P.1: Electrostatic phenomena - Principles and measurements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

ELONGATION ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under


EMISSION IEC IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for


EMISSION MEASUREMENT IEC IEC 60255-26 2013 Measuring relays and protection equipment - P.26: Electromagnetic



ENDURANCE TESTING BSI BS EN 16014 2011 Hardware for furniture - Strength and durability of locking mechanisms /By


ENERGY CONSUMPTION ISO

ISO/TR 16344 2012 Energy performance of buildings - Common terms, definitions and symbols for the overall energy performance rating and certification /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

ENERGY TECHNOLOGY ISO ISO 12655 2013 Energy performance of buildings - Presentation of measured energy use of

buildings /By International Organization for Standardization (ISO). Geneva: ISO, 2013. ISO 13579-1 2013 Industrial furnaces and associated processing equipment - Method of

measuring energy balance and calculating efficiency - P.1: General methodology /By International Organization for Standardization (ISO). Geneva: ISO, 2013.




ISO/TR 16344 2012 Energy performance of buildings - Common terms, definitions and symbols for the overall energy performance rating and certification /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


ENGINEERING DRAWINGS IEC


ENVIRONMENTAL ENGINEERING IEC




ENVIRONMENTAL MANAGEMENT IEC


ISO ISO/IEC TS 17021-2 2012 Conformity assessment - Requirements for bodies providing audit

and certification of management systems - P.2: Competence requirements for auditing and certification of environmental management systems /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2012.

ENVIRONMENTAL TESTING IEC IEC 60068-2-55 2013 Environmental testing - P.2-55: Tests - Test Ee and guidance - Loose

cargo testing including bounce /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.







IEC 62706 2012 Radiation protection instrumentation - Environmental, electromagnetic and mechanical performance requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

EQUIPMENT SAFETY IEC IEC 60204-31 2013 Safety of machinery - Electrical equipment of machines - P.31: Particular



ESTERS (CARBOXYLIC) BSI BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester



ESTIMATION IEC IEC 61710 2013 Power law model - Goodness-of-fit tests and estimation methods /By


FASTENERS BSI BS EN 16014 2011 Hardware for furniture - Strength and durability of locking mechanisms /By


ISO ISO 898-2 2012 Mechanical properties of fasteners made of carbon steel and alloy steel - P.2:

Nuts with specified property classes - Coarse thread and fine pitch thread /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

FATTY ACIDS BSI BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester


FERROUS ALLOYS IEC IEC 60404-8-4 2013 Magnetic materials - P.8-4: Specifications for individual materials - Cold-

rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

FERROUS METALS IEC IEC 60404-8-4 2013 Magnetic materials - P.8-4: Specifications for individual materials - Cold-



FERRULES IEC


FIBRE OPTIC CABLES

IEC


IEC/TR 62547 2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for the interpretation of results /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

FIBRE OPTIC CONNECTORS

IEC






IEC 61300-3-50 2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-50: Examinations and measurements - Crosstalk for optical spatial switches /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.




IEC 61753-088-2 2013 Fibre optic interconnecting devices and passive components - Performance standard - P.088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC 61753-089-2 2013 Fibre optic interconnecting devices and passive components - Performance standard - P.089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.



IEC 62664-1-1 2013 Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - P.1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IEC/TR 62627-03-02 2011 Fibre optic interconnecting devices and passive components - P.03-02: Reliability - Report of high power transmission test of specified passive optical components /By International Electrotechnical Commission (IEC). Geneva: IEC, 2011.

IEC/TR 62627-03-03 2013 Fibre optic interconecting devices and passive components - P.03-03: Reliability - Report on high-power reliability for metal-doped optical fibre plug-style optical attenuators /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

FIBRE OPTICS IEC IEC 61280-1-1 2013 Fibre optic communication subsystem basic test procedures -

P.1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.









FILMS (STATES OF MATTER) ISO ISO 17636-1 2013 Non-destructive testing of welds - Radiographic testing - P.1: X- and gamma-

ray techniques with film /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

FIRE RISKS IEC IEC 60695-2-10 2013 Fire hazard testing - P.2-10: Glowing/hot-wire based test methods - Glow-

wire apparatus and common test procedure /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

FIRE TESTS IEC IEC 60695-2-10 2013 Fire hazard testing - P.2-10: Glowing/hot-wire based test methods - Glow-

wire apparatus and common test procedure /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.



IEC/TS 60695-6-31 2013 Fire hazard testing - P.6-31: Smoke obscuration - Small-scale static test - Materials /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


IEC 60695-11-10 2013 Fire hazard testing - P.11-10: Test flames - 50 W horizontal and vertical flame test methods /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

FITNESS FOR PURPOSE IEC


FITTINGS ISO

ISO 1452-3 2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - P.3: Fittings /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 13341 2010 Gas cylinders - Fitting of valves to gas cylinders /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

FLANGES ISO

ISO 7005-1 2011 Pipe flanges - P.1: Steel flanges for industrial and general service piping systems /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

FLEXIBLE PIPES ISO

ISO 4641 2010 Rubber hoses and hose assemblies for water suction and discharge - Specification /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.


FLEXOMETER ISO ISO 5402-1 2011 Leather - Determination of flex resistance - P.1: Flexometer method /By

International Organization for Standardization (ISO) and International Union of Leather Technologists and Chemists Societies (IULTCS). Geneva: ISO, 2011.

FLUID FLOW ISO ISO 12242 2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for

liquid /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

FLUORESCENT MATERIALS ISO ISO 20846 2011 Petroleum products - Determination of sulfur content of automotive fuels -

Ultraviolet fluorescence method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

FOLDING SHUTTERS BSI BS EN 1630 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar


FOOD MANUFACTURING PROCESSES BSI PAS 223 2011 Prerequisite programmes and design requirements for food safety in the

manufacture and provision of food packaging /By British Standards Institution (BSI). London: BSI, 2011.

ISO ISO 14470 2011 Food irradiation - Requirements for the development, validation and routine

control of the process of irradiation using ionizing radiation for the treatment of food /By International Organization for Standardization (ISO). Geneva: ISO, 2011.


FOOD MICROBIOLOGY ISO


FOOD TECHNOLOGY BSI

PAS 223 2011 Prerequisite programmes and design requirements for food safety in the manufacture and provision of food packaging /By British Standards Institution (BSI). London: BSI, 2011.

ISO ISO/TS 22002-2 2013 Prerequisite programmes on food safety - P.2: Catering /By International

Organization for Standardization (ISO). Geneva: ISO, 2013.

FOOD TESTING BSI BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-


FOOTWEAR ISO ISO 20344 2011 Personal protective equipment - Test methods for footwear /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

FREIGHT TRANSPORT ISO

ISO 3394 2012 Packaging - Complete, filled transport packages and unit loads - Dimensions of rigid rectangular packages /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.


FUNCTIONAL ANALYSIS IEC


FURNACES ISO

ISO 13579-1 2013 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency - P.1: General methodology /By International Organization for Standardization (ISO). Geneva: ISO, 2013.




FURNITURE BSI

BS EN 16014 2011 Hardware for furniture - Strength and durability of locking mechanisms /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011.

PD CEN/TR 16015 2010 Hardware for furniture - Terms for locking mechanisms /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2010.


FURNITURE ACCESSORIES BSI



FUSE-HOLDERS IEC


FUSE-LINKS IEC


FUSES IEC


IEC 60549 2013 High-voltage fuses for the external protection of shunt capacitors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

GAMMA-RAY APPARATUS ISO

ISO 17636-2 2013 Non-destructive testing of welds - Radiographic testing - P.2: X - and gamma-ray techniques with digital detectors /By International Organization for Standardization (ISO). Geneva: ISO, 2013.


GAS CYLINDERS ISO ISO 13341 2010 Gas cylinders - Fitting of valves to gas cylinders /By International Organization

for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

GAS VALVES ISO ISO 13341 2010 Gas cylinders - Fitting of valves to gas cylinders /By International Organization


GASES IEC IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for


GAUGES ISO ISO 27893 2011 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of

results of calibrations by direct comparison with a reference gauge /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

GERMANIUM IEC IEC 61275 2013 Radiation protection instrumentation - Measurement of discrete radionuclides


GLASS BSI BS EN 1423 2013 Road marking materials - Drop on materials - Glass beads, antiskid



GLASS - LAMINATES ISO

ISO 12543-6 2011 Glass in building - Laminated glass and laminated safety glass - P.6: Appearance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

GRAPHIC REPRESENTATION IEC


GRAPHIC SYMBOLS ISO ISO 7010 2011 Graphical symbols - Safety colours and safety signs - Registered safety signs

/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

GREENHOUSE GASES IEC IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for


GRILLES BSI BS EN 1630 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar


HAND-PORTABLE LAMPS IEC IEC 60598-2-8 2013 Luminaires - P.2-8: Particular requirements - Handlamps /By International



HAZARDS IEC


HEALTH SERVICES IEC





HEAT PUMPS ISO


ISO 16358-2 2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - P.2: Heating seasonal performance factor /By International Organization for Standardization (ISO). Geneva: ISO, 2013.



HEAT TRANSFER IEC


HEATERS IEC


HEATING EQUIPMENT IEC


HEXAGONAL-HEAD FASTENERS ISO

ISO 4033 2012 Hexagon high nuts (style 2) - Product grades A and B /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

HIGH VOLTAGE IEC



HIGH-VOLTAGE EQUIPMENT IEC IEC/TS 62271-210 2013 High-voltage switchgear and controlgear - P.210: Seismic qualification

for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

HOT-DIP COATING ISO ISO 3575 2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing

qualities /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2011.

HOT ROLLED PRODUCTS ISO ISO 3573 2012 Hot-rolled carbon steel sheet of commercial and drawing qualities /By

International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2012.

HOUSEHOLD EQUIPMENT IEC IEC 60335-2-21 2012 Household and similar electrical appliances - Safety - P.2-21: Particular


HUMAN BODY IEC IEC 60749-26 2013 Semiconductor devices - Mechanical and climatic test methods - P.26:


IDENTIFICATION METHODS IEC IEC 62056-6-1 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.6-1:





IMPEDANCE MEASUREMENT IEC


IMPULSE TURBINES IEC

IEC/TS 62600-200 2013 Marine energy - Wave, tidal and other water current converters - P.200: Electricity producing tidal energy converters - Power performance assessment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

IMPULSE VOLTAGES IEC


INCANDESCENT LAMPS IEC



IEC 60598-2-8 2013 Luminaires - P.2-8: Particular requirements - Handlamps /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

INFORMATION EXCHANGE IEC















ISO

ISO/IEC TR 16166 2010 Information technology - Telecommunications and information exchange between systems - Next Generation Corporate Networks (NGCN) - Security of session-based communications /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2010.

ISO/IEC 27037 2012 Information technology - Security techniques - Guidelines for identification, collection, acquisition, and preservation of digital evidence /By International Organization for Standardization (ISO). Geneva: ISO, 2012.



INFORMATION TECHNOLOGY ISO


ISO/IEC 27037 2012 Information technology - Security techniques - Guidelines for identification, collection, acquisition, and preservation of digital evidence /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


INFRARED RADIATION IEC


INSPECTION BY ATTRIBUTES ISO

ISO 3951-4 2011 Sampling procedures for inspection by variables - P.4: Procedures for assessment of declared quality levels /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

INSTALLATION IEC



INSTRUCTIONS FOR USE IEC


INSTRUMENTS IEC

IEC 61275 2013 Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


INTEGRATED CIRCUITS IEC



INTERFACES IEC



INTERFACES (DATA PROCESSING) IEC





IEC 62056-7-6 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.7-6: The 3-layer, connection-oriented HDLC based communication profile /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.





SPRING Singapore TR 29 2012 Technical reference for national authentication framework - Authentication operator

interface messages /By Standards, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2012.

IRONMONGERY (BUILDINGS) BSI BS EN 1906 2012 Building hardware - Lever handles and knob furniture - Requirements and


IRRIGATION WORKS ISO ISO 14470 2011 Food irradiation - Requirements for the development, validation and routine


IRRIGATION WORKS TERMINOLOGY ISO ISO 14470 2011 Food irradiation - Requirements for the development, validation and routine


KEYS BSI PD CEN/TR 16015 2010 Hardware for furniture - Terms for locking mechanisms /By British

Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2010.

KNOBS (HANDLES) BSI BS EN 1906 2012 Building hardware - Lever handles and knob furniture - Requirements and



LABORATORIES ISO


LABORATORIES MEASUREMENT ISO


LABORATORY EQUIPMENT IEC




LAMINATED GLASS ISO

ISO 12543-1 2011 Glass in building - Laminated glass and laminated safety glass - P.1: Definitions and description of component parts /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.


ISO 12543-2 2011 Glass in building - Laminated glass and laminated safety glass - P.2: Laminated safety glass /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

ISO 12543-4 2011 Glass in building - Laminated glass and laminated safety glass - P.4: Test methods for durability /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

ISO 12543-5 2011 Glass in building - Laminated glass and laminated safety glass - P.5: Dimensions and edge finishing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

LAMINATES IEC



ISO

ISO 12543-1 2011 Glass in building - Laminated glass and laminated safety glass - P.1: Definitions and description of component parts /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

LATCHES BSI



LEAKAGE PATHS IEC


LEATHER ISO

ISO 5402-1 2011 Leather - Determination of flex resistance - P.1: Flexometer method /By International Organization for Standardization (ISO) and International Union of Leather Technologists and Chemists Societies (IULTCS). Geneva: ISO, 2011.

ISO 11640 2012 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing /By International Organization for Standardization (ISO) and International Union of Leather Technologists and Chemists Societies (IULTCS). 2nd ed. Geneva: ISO, 2012.

ISO 14268 2012 Leather - Physical and mechanical tests - Determination of water vapour permeability /By International Organization for Standardization (ISO) and International Union of Leather Technologists and Chemists Societies (IULTCS). 2nd ed. Geneva: ISO, 2012.

LEATHER - COLOUR-FASTNESS TESTS ISO

ISO 11640 2012 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing /By International Organization for Standardization (ISO) and International Union of Leather Technologists and Chemists Societies (IULTCS). 2nd ed. Geneva: ISO, 2012.

LETTERS (SYMBOLS) IEC



LEVER HANDLES BSI BS EN 1906 2012 Building hardware - Lever handles and knob furniture - Requirements and


LIFE CYCLE ISO ISO/IEC TR 29110-3 2011 Software engineering - Lifecycle profiles for Very Small Entities


LIFE (DURABILITY) IEC IEC 62068 2013 Electrical insulating materials and systems - General method of evaluation of

electrical endurance under repetitive voltage impulses /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

LIGHTING EQUIPMENT IEC IEC 60598-2-8 2013 Luminaires - P.2-8: Particular requirements - Handlamps /By International



IEC 60598-2-12 2013 Luminaires - P.2-12: Particular requirements - Mains socket-outlet mounted nightlights /By International Electrotechnical Commission (IEC). 2nd d. Geneva: IEC, 2013.

LIGHTNING PROTECTION IEC.



LIQUID CRYSTAL DEVICES IEC


LIQUID FUELS BSI


LOAD MEASUREMENT ISO

ISO 15222 2011 Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

LOCK CYLINDERS BSI


LOCKS BSI




LOW VOLTAGE IEC IEC 60364-7-713 2013 Low-voltage electrical installations - P.7-713: Requirements for special

installations or locations - Furniture /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

LUMINAIRES IEC IEC 60598-2-8 2013 Luminaires - P.2-8: Particular requirements - Handlamps /By International




LUMINOUS FLUX IEC IEC 61753-058-2 2013 Fibre optic interconnecting devices and passive components -

Performance standard - P.058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

MACHINE TOOL COMPONENTS IEC IEC 60204-31 2013 Safety of machinery - Electrical equipment of machines - P.31: Particular


MAGNESIUM ISO ISO 6101-6 2011 Rubber - Determination of metal content by atomic absorption spectrometry -

P.6: Determination of magnesium content /By International Organization for Standardization (ISO). Geneva: ISO, 2011.


MAGNETIC FIELDS IEC IEC 60601-2-33 2010 Medical electrical equipment - P. 2-33: Particular requirements for the


IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - P.3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

MAGNETIC MATERIALS

IEC

IEC 60404-8-4 2013 Magnetic materials - P.8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state /By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2013.

MAGNETIC MEASUREMENT

IEC


MAGNETIC PROPERTIES OF MATERIALS

IEC

IEC 60404-8-4 2013 Magnetic materials - P.8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.


MAGNETISM IEC IEC 60404-8-4 2013 Magnetic materials - P.8-4: Specifications for individual materials - Cold-


MANAGEMENT IEC






MARINE INSTRUMENTS IEC





MARINE NAVIGATION IEC




MARINE TRANSPORT IEC



MARKING BSI


MATERIALS HANDLING ISO

ISO 3676 2012 Packaging - Complete, filled transport packages and unit loads - Unit load dimensions /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2012.

MATHEMATICAL MODELS IEC


MEASUREMENT ISO

ISO 11352 2012 Water quality - Estimation of measurement uncertainty based on validation and quality control data /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

MEASURING INSTRUMENTS IEC





MEASURING RELAYS IEC


MECHANICAL CONTROL SYSTEMS IEC


MECHANICAL MEASUREMENT IEC


MECHANICAL TESTING BSI





IEC





MEDICAL EQUIPMENT IEC IEC 60601-2-33 2010 Medical electrical equipment - P. 2-33: Particular requirements for the


IEC 61689 2013 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.






ISO

ISO 5361 2012 Anaesthetic and respiratory equipment - Tracheal tubes and connectors /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2012.

MEDICAL INSTRUMENTS ISO

ISO 7494-1 2011 Dentistry - Dental units - P.1: General requirements and test methods /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

MEDICAL RADIOLOGY IEC


METEOROLOGICAL MEASUREMENT IEC

IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind turbines based on nacelle anemometry /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


METERS

IEC





MICROBIOLOGICAL ANALYSIS

ISO ISO/TS 6579-2 2012 Microbiology of food and animal feed - Horizontal method for the detection,

enumeration and serotyping of salmonella - P.2: Enumeration by a miniaturized most probable number technique /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


MICROBIOLOGY ISO

ISO/TS 6579-2 2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of salmonella - P.2: Enumeration by a miniaturized most probable number technique /By International Organization for Standardization (ISO). Geneva: ISO, 2012.


MIXTURES BSI


MOISTURE MEASUREMENT BSI

BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2012.

MORTICE LATCHES BSI


MOULDED MATERIALS IEC


MULTIMEDIA SYSTEMS IEC




NACELLES IEC

IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind turbines based on nacelle anemometry /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

NAVIGATION IEC


NEUTRONS IEC


NOISE (ENVIRONMENTAL) IEC


NOISE (SPURIOUS SIGNALS) IEC





NON-DESTRUCTIVE TESTING ISO ISO 17636-1 2013 Non-destructive testing of welds - Radiographic testing - P.1: X- and gamma-

ray techniques with film /By International Organization for Standardization (ISO). Geneva: ISO, 2013. ISO 17636-2 2013 Non-destructive testing of welds - Radiographic testing - P.2: X - and

gamma-ray techniques with digital detectors /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

NUCLEAR-ELECTRIC POWER STATIONS IEC

IEC/IEEE 62582-3 2012 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - P.3: Elongation at break /By International Electrotechnical Commission (IEC) and Institute of Electrical and Electronics Engineers (IEEE). Geneva: IEC, 2012.

IEC 62671 2013 Nuclear power plants - Instrumentation and control important to safety - Selection and use of industrial digital devices of limited functionality /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

NUCLEAR MAGNETIC RESONANCE SPECTROMETRY IEC



NUCLEAR REACTORS IEC

IEC 62671 2013 Nuclear power plants - Instrumentation and control important to safety - Selection and use of industrial digital devices of limited functionality /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

NUCLEAR SAFETY IEC


NUCLEAR TECHNOLOGY IEC IEC 62706 2012 Radiation protection instrumentation - Environmental, electromagnetic and

mechanical performance requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

NUTS ISO ISO 4033 2012 Hexagon high nuts (style 2) - Product grades A and B /By International

Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

NUTS (FASTENERS) ISO ISO 898-2 2012 Mechanical properties of fasteners made of carbon steel and alloy steel - P.2:

Nuts with specified property classes - Coarse thread and fine pitch thread /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

OBJECTS (PROGRAMMING LANGUAGE) IEC IEC/TR 62541-1 2010 OPC Unified Architecture - P.1: Overview and Concepts /By International

Electrotechnical Commission (IEC). Geneva: IEC, 2010.


OCCUPATIONAL SAFETY IEC


OFFSHORE CONSTRUCTION WORKS IEC


OPACITY IEC

IEC/TS 60695-6-31 2013 Fire hazard testing - P.6-31: Smoke obscuration - Small-scale static test - Materials /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

OPEN SYSTEMS INTERCONNECTION IEC


ISO


OPHTHALMIC EQUIPMENT ISO

ISO 13666 2012 Ophthalmic optics - Spectacle lenses - Vocabulary /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2012.


OPTICAL COMMUNICATION SYSTEMS IEC IEC 61280-1-1 2013 Fibre optic communication subsystem basic test procedures - P.1-1: Test

procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.






OPTICAL DENSITY IEC IEC 61280-1-1 2013 Fibre optic communication subsystem basic test procedures - P.1-1: Test



OPTICAL DISPERSIVE POWER IEC


OPTICAL FIBRES IEC IEC 61280-1-1 2013 Fibre optic communication subsystem basic test procedures - P.1-1: Test













OPTICAL MEASUREMENT IEC IEC/TS 60695-6-31 2013 Fire hazard testing - P.6-31: Smoke obscuration - Small-scale static

test - Materials /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.







OPTICAL PROPERTIES OF MATERIALS IEC


OPTOELECTRONIC DEVICES IEC






OVERHEAD CONTACT LINES IEC IEC 60913 2013 Railway applications - Fixed installations - Electric traction overhead contact

lines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

OVERHEAD CONTACT SYSTEMS IEC IEC 60913 2013 Railway applications - Fixed installations - Electric traction overhead contact

lines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

OVERHEAD POWER LINES BSI BS EN 50522 2010 Earthing of power installations exceeding 1 kV a.c. /By British Standards

Institution (BSI) and European Committee for Electrotechnical Standardization (CENELEC). London: BSI, 2010.

OXIDATION RESISTANCE BSI BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester


PACKAGES ISO ISO 3394 2012 Packaging - Complete, filled transport packages and unit loads - Dimensions of


PACKAGING IEC IEC 60286-3 2013 Packaging of components for automatic handling - P.3: Packaging of surface

mount components on continuous tapes /By International Electrotechnical Commission (IEC). 5 th ed. Geneva: IEC, 2013.


ISO



ISO 13127 2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

PACKAGING PROCESSES BSI

PAS 223 2011 Prerequisite programmes and design requirements for food safety in the manufacture and provision of food packaging /By British Standards Institution (BSI). London: BSI, 2011.

PATIENT TRANSPORT EQUIPMENT ISO

ISO 6875 2011 Dentistry - Patient chair /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2011.

PENDULUMS ISO


PERFORMANCE IEC





PERFORMANCE TESTING BSI


IEC








PETROLEUM EXTRACTION IEC


PETROLEUM PRODUCTS BSI


ISO


PETROLEUM TECHNOLOGY IEC



PHOTONS IEC IEC 61275 2013 Radiation protection instrumentation - Measurement of discrete radionuclides


PHYSIOTHERAPY IEC IEC 61689 2013 Ultrasonics - Physiotherapy systems - Field specifications and methods of

measurement in the frequency range 0,5 MHz to 5 MHz /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

PIPE FLANGES ISO ISO 7005-1 2011 Pipe flanges - P.1: Steel flanges for industrial and general service piping

systems /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

PIPELINES IEC IEC 61892-2 2012 Mobile and fixed offshore units - Electrical installations - P.2: System design

/By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2012.

PIPES IEC IEC 61212-3-1 2013 Insulating materials - Industrial rigid round laminated tubes and rods based

on thermosetting resins for electrical purposes - P.3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.



ISO


PIPEWORK SYSTEMS ISO

ISO 7005-1 2011 Pipe flanges - P.1: Steel flanges for industrial and general service piping systems /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

PLASTICS IEC IEC 61212-3-1 2013 Insulating materials - Industrial rigid round laminated tubes and rods based



PLASTICS AND RUBBER TECHNOLOGY ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under


PNEUMATIC CONTROL SYSTEMS IEC IEC/TR 62794 2012 Industrial-process measurement, control and automation - Reference model

for representation of production facilities (digital factory) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.


POLLUTANT GASES IEC IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for


POLLUTION CONTROL IEC IEC/TR 62725 2013 Analysis of quantification methodologies for greenhouse gas emissions for


POLYMERS IEC IEC 61212-3-1 2013 Insulating materials - Industrial rigid round laminated tubes and rods based



POWER CONTROL (ELECTRIC) IEC IEC 62056-6-1 2013 Electricity metering data exchange - The DLMS/COSEM suite - P.6-1:


POWER MEASUREMENT (ELECTRIC) IEC IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind



POWER TRANSFORMERS IEC


PRINTED-CIRCUIT BOARDS IEC



PRINTED CIRCUITS IEC IEC 61189-11 2013 Test methods for electrical materials, printed boards and other

interconnection structures and assemblies - P.11: Measurement of melting temperature or melting temperature ranges of solder alloys /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.


PROCESS CONTROL IEC IEC 60848 2013 GRAFCET specification language for sequential function charts /By






PRODUCT DESIGN IEC



PRODUCTION EQUIPMENT IEC


PROGRAMMING IEC


PROGRAMMING LANGUAGES IEC IEC 60848 2013 GRAFCET specification language for sequential function charts /By




PROTECTED ELECTRICAL EQUIPMENT IEC IEC 60204-31 2013 Safety of machinery - Electrical equipment of machines - P.31: Particular




PROTECTIVE EQUIPMENT ISO ISO 20344 2011 Personal protective equipment - Test methods for footwear /By International


PROTECTIVE RELAYS IEC IEC 60255-26 2013 Measuring relays and protection equipment - P.26: Electromagnetic


PROTEINS BSI BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-


PUBLISHING IEC IEC/TR 62780 2012 Multimedia systems and equipment - Multimedia e-publishing and e-book -

Guideline for protection against mechanical stress during distribution of e-books in CD and DVD media /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.


PULSE CIRCUITS IEC


PUMPS IEC


QUALIFICATION APPROVAL IEC


ISO

ISO 13585 2012 Brazing - Qualification test of brazers and brazing operators /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

QUALITY ASSURANCE IEC


QUALITY ASSURANCE SYSTEMS IEC




QUALITY CONTROL IEC IEC/PAS 62814 2012 Dependability of software products containing reusable components -


RACKS IEC IEC 61587-3 2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and


RADIATION HAZARDS IEC IEC 62706 2012 Radiation protection instrumentation - Environmental, electromagnetic and

mechanical performance requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

RADIATION MEASUREMENT IEC IEC 61275 2013 Radiation protection instrumentation - Measurement of discrete radionuclides




RADIATION PROTECTION IEC IEC 60601-2-33 2010 Medical electrical equipment - P. 2-33: Particular requirements for the






RADIO DISTURBANCES IEC

CISPR 16-4-2 2011 Specification for radio disturbance and immunity measuring apparatus and methods - P. 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.


RADIO EQUIPMENT IEC





RADIO PROPERTIES OF ELECTRICITY IEC


RADIO WAVES IEC


RADIOACTIVE MATERIALS IEC


RADIOCOMMUNICATION IEC






RADIOFREQUENCIES IEC CISPR/TR 31 2012 Database on the characteristics of radio services /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2012. IEC 61169-43 2013 Radio-frequency connectors - P.43: Sectional specification for RBMA series

blind mating RF coaxial connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

RADIOGRAPHIC TESTING ISO ISO 17636-1 2013 Non-destructive testing of welds - Radiographic testing - P.1: X- and gamma-

ray techniques with film /By International Organization for Standardization (ISO). Geneva: ISO, 2013. ISO 17636-2 2013 Non-destructive testing of welds - Radiographic testing - P.2: X - and


RADIOLOGY APPARATUS (MEDICAL) IEC IEC 61689 2013 Ultrasonics - Physiotherapy systems - Field specifications and methods of

measurement in the frequency range 0,5 MHz to 5 MHz /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

RADIONUCLIDES IEC



RAILWAY APPLICATIONS IEC



RAILWAY EQUIPMENT IEC


RAILWAY VEHICLE COMPONENTS IEC


RAILWAY VEHICLES IEC


RATED VOLTAGE IEC




RECEIVERS IEC


RECORDING SYSTEMS IEC


RECTANGULAR SHAPE ISO


REED RELAYS IEC

IEC 62246-1 2011 Reed switches - P. 1: Generic specification /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.



REFLECTIVE MATERIALS BSI


REINFORCED MATERIALS IEC



ISO


RELAYS IEC IEC 60255-24 2013 Measuring relays and protection equipment - P.24: Common format for

transient data exchange (COMTRADE) for power systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.





RELIABILITY IEC




RESINS (NATURAL) IEC IEC 60455-3-8 2013 Resin based reactive compounds used for electrical insulation - P.3:

Specifications for individual materials - Sheet 8: Resins for cable accessories /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

RESONANCE IEC IEC 60601-2-33 2010 Medical electrical equipment - P. 2-33: Particular requirements for the


RESPIRATORS ISO

ISO 5361 2012 Anaesthetic and respiratory equipment - Tracheal tubes and connectors /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2012.


RETROREFLECTIVE MATERIALS BSI BS EN 1423 2013 Road marking materials - Drop on materials - Glass beads, antiskid


RIGID PIPES IEC IEC 61212-3-2 2013 Insulating materials - Industrial rigid round laminated tubes and rods based

on thermosetting resins for electrical purposes - P.3: Specifications for individual materials - sheet 2: Round laminated moulded tubes /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

RISK ANALYSIS IEC IEC/TR 80001-2-1 2012 Application of risk management for IT-networks incorporating medical

devices - P.2-1: Step-by-step risk management of medical IT-networks - Practical applications and examples /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.




RISK ASSESSMENT IEC IEC 60519-12 2013 Safety in electroheating installations - P.12: Particular requirements for

infrared electroheating installations /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.






ROAD MARKING BSI


ROAD VEHICLES ISO ISO 27667 2011 Road vehicles - Brake lining friction materials - Evaluation of corrosion effects

on painted backing plates and brake shoes /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

ROLLER SHUTTERS BSI BS EN 1630 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar



RUBBER ISO


ISO 1432 2013 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2013.

ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load /By International Organization for Standardization (ISO). 7th ed. Geneva: ISO, 2013.


SAFETY COLOURS ISO

ISO 7010 2011 Graphical symbols - Safety colours and safety signs - Registered safety signs /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

SAFETY ENGINEERING IEC


SAFETY GLASS ISO

ISO 12543-2 2011 Glass in building - Laminated glass and laminated safety glass - P.2: Laminated safety glass /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

ISO 12543-4 2011 Glass in building - Laminated glass and laminated safety glass - P.4: Test methods for durability /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.




SAFETY GLASS BUILDINGS ISO ISO 12543-4 2011 Glass in building - Laminated glass and laminated safety glass - P.4: Test

methods for durability /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011. ISO 12543-5 2011 Glass in building - Laminated glass and laminated safety glass - P.5:

Dimensions and edge finishing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.


SAFETY MEASURES IEC






SALMONELLA ISO ISO/TS 6579-2 2012 Microbiology of food and animal feed - Horizontal method for the detection,

enumeration and serotyping of salmonella - P.2: Enumeration by a miniaturized most probable number technique /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

SAMPLING METHODS ISO ISO 3951-4 2011 Sampling procedures for inspection by variables - P.4: Procedures for

assessment of declared quality levels /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

ISO 5667-21 2010 Water quality - Sampling - P.21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO 6498 2012 Animal feeding stuffs - Guidelines for sample preparation /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

SAMPLING TABLES ISO ISO 3951-4 2011 Sampling procedures for inspection by variables - P.4: Procedures for

assessment of declared quality levels /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

SECURITY SYSTEMS IN BUILDINGS IEC IEC 60839-11-1 2013 Alarm and electronic security systems - P.11-1: Electronic access control

systems - System and components requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

SEDIMENT ISO ISO 21338 2010 Water quality - Kinetic determination of the inhibitory effects of sediment, other

solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) /By International Organization for Standardization (ISO). Geneva: ISO, 2010.


SEISMIC COEFFICIENT IEC IEC/TS 62271-210 2013 High-voltage switchgear and controlgear - P.210: Seismic qualification


SEISMIC LOADING IEC IEC/TS 62271-210 2013 High-voltage switchgear and controlgear - P.210: Seismic qualification


SEMANTICS IEC IEC 61131-3 2013 Programmable controllers - P.3: Programming languages /By International


SEMICONDUCTOR DEVICES IEC IEC 60749-26 2013 Semiconductor devices - Mechanical and climatic test methods - P.26:



SENSITIVITY IEC IEC 60749-26 2013 Semiconductor devices - Mechanical and climatic test methods - P.26:



SEWING MACHINERY IEC


SHEET MATERIALS ISO ISO 3573 2012 Hot-rolled carbon steel sheet of commercial and drawing qualities /By

International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2012. ISO 3574 2012 Cold-reduced carbon steel sheet of commercial and drawing qualities /By

International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2012. ISO 3575 2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing

qualities /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2011.

SHIELDS IEC IEC 61587-3 2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and


SHUNT REACTORS IEC


SHUTTERS (BUILDINGS) BSI



SIGNAL DISTORTION IEC IEC 62488-1 2012 Power line communication systems for power utility applications - P.1:

Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

SIGNALS IEC IEC/TS 62771 2012 Information model covering the contents of IEC 81346-1 and IEC 81346-2,


ISO ISO 7010 2011 Graphical symbols - Safety colours and safety signs - Registered safety signs


SIGNS ISO ISO 7010 2011 Graphical symbols - Safety colours and safety signs - Registered safety signs


SMOKE IEC IEC/TS 60695-6-30 2013 Fire hazard testing - P.6-30: Smoke obscuration - Small-scale static

method - Apparatus /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013. IEC/TS 60695-6-31 2013 Fire hazard testing - P.6-31: Smoke obscuration - Small-scale static

test - Materials /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

SOFTWARE ENGINEERING TECHNIQUES ISO ISO/IEC TR 29110-3 2011 Software engineering - Lifecycle profiles for Very Small Entities



SOFTWARE TECHNIQUES ISO

ISO/IEC TR 29110-1 2011 Software engineering - Lifecycle profiles for Very Small Entities (VSEs) - P.1: Overview /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2011.

ISO/IEC TR 29110-5-1-1 2012 Software engineering - Lifecycle profiles for Very Small Entities (VSEs) - P.5-1-1: Management and engineering guide: Generic profile group: Entry profile /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2012.

SOLID ELECTRICAL INSULATING MATERIALS IEC IEC 60455-3-8 2013 Resin based reactive compounds used for electrical insulation - P.3:

Specifications for individual materials - Sheet 8: Resins for cable accessories /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

SOUND INSULATION ISO ISO 10140-2 2010 Acoustics - Laboratory measurement of sound insulation of building elements

P.2: Measurement of airborne sound insulation /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

SPECIMEN PREPARATION BSI BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-


SPECTACLE LENSES ISO ISO 13666 2012 Ophthalmic optics - Spectacle lenses - Vocabulary /By International



SPECTROSCOPY IEC



SPECTRUM ANALYZERS IEC


SPEECH TRANSMISSION SYSTEMS IEC


STATISTICAL METHODS OF ANALYSIS IEC




ISO

ISO/TR 13587 2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

STATISTICAL TESTING IEC


STEELS ISO

ISO 3574 2012 Cold-reduced carbon steel sheet of commercial and drawing qualities /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2012.

STORAGE IEC




STORAGE EQUIPMENT IEC



STORAGE FURNITURE IEC


STORAGE WATER HEATERS IEC


STRAIN ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under


STRENGTH OF MATERIALS BSI BS EN 16014 2011 Hardware for furniture - Strength and durability of locking mechanisms /By

British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2011. BS EN 1630 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar


STRESS ANALYSIS IEC



SUCTION HOSES ISO


SULPHUR ISO


SUPERCONDUCTORS IEC IEC 61788-5 2013 Superconductivity - P.5: Martrix to superconductor volume ratio

measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

SURFACE MOUNTING IEC


SURFACE MOUNTING DEVICES IEC IEC 61191-1 2013 Printed board assemblies - P.1: Generic specification - Requirements for

soldered electrical and electronic assemblies using surface mount and related assembly technologies /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

SURFACE SPREAD OF FLAME IEC IEC 60695-9-1 2013 Fire hazard testing - P.9-1: Surface spread of flame - General guidance /By



SURGE LIMITERS IEC.


SURGE PROTECTION IEC.


SWITCHES IEC





SWITCHGEAR IEC




SYMBOLS ISO ISO/TR 16344 2012 Energy performance of buildings - Common terms, definitions and symbols

for the overall energy performance rating and certification /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

SYNTAX IEC IEC 61131-3 2013 Programmable controllers - P.3: Programming languages /By International


SYSTEMS ANALYSIS IEC IEC 60839-11-1 2013 Alarm and electronic security systems - P.11-1: Electronic access control

systems - System and components requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

TECHNICAL DOCUMENTS IEC IEC 82079-1 2012 Preparation of instructions for use - Structuring, content and presentation -

P.1: General principles and detailed requirements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

TELECOMMUNICATION IEC




ISO


TELECOMMUNICATION SYSTEMS IEC




TELEVISION BROADCASTING IEC




TELEVISION RECEIVERS IEC IEC 62516-3 2013 Terrestrial digital multimedia broadcasting (T-DMB) receivers - P.3: Common

API /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013. TENSILE LOADING ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under


TENSILE TESTING BSI BS EN 1906 2012 Building hardware - Lever handles and knob furniture - Requirements and


ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under


ISO 4136 2012 Destructive tests on welds in metallic materials - Transverse tensile test /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

TENSION SET ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under


TERMINOLOGY BSI PD CEN/TR 16015 2010 Hardware for furniture - Terms for locking mechanisms /By British

Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2010.


IEC

IEC 62264-1 2013 Enterprise-control system integration - P.1: Models and terminology /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


ISO ISO/TR 16344 2012 Energy performance of buildings - Common terms, definitions and symbols

for the overall energy performance rating and certification /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

TEST EQUIPMENT BSI BS EN 16091 2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester


IEC CISPR 16-4-2 2011 Specification for radio disturbance and immunity measuring apparatus and

methods - P. 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.



TEST MODELS IEC IEC 60749-26 2013 Semiconductor devices - Mechanical and climatic test methods - P.26:



TEST SPECIMENS IEC


ISO


TESTING IEC

IEC 60243-1 2013 Electric strength of insulating materials - Test methods - P.1: Tests at power frequencies /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.


TESTING CONDITIONS BSI


IEC





ISO

ISO 36 2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics /By By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2011.

TEXTILES ISO


THERMAL PROTECTION IEC IEC 60549 2013 High-voltage fuses for the external protection of shunt capacitors /By


THERMAL TESTING IEC IEC 60216-1 2013 Electrical insulating materials - Thermal endurance properties - P.1: Ageing

procedures and evaluation of test results /By International Electrotechnical Commission (IEC). 6 th ed. Geneva: IEC, 2013.

IEC 60216-8 2013 Electrical insulating materials - Thermal endurance properties - P.8: Instructions for calculating thermal endurance characteristics using simplified procedures /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

THERMOPLASTIC POLYMERS ISO ISO 2285 2013 Rubber, vulcanized or thermoplastic - Determination of tension set under




THERMOSETTING POLYMERS IEC



THREADS ISO

ISO 898-2 2012 Mechanical properties of fasteners made of carbon steel and alloy steel - P.2: Nuts with specified property classes - Coarse thread and fine pitch thread /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

THYRISTORS IEC

IEC 61954 2011 Static var compensators (SVC) - Testing of thyristor valves /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.

TRACE HEATING SYSTEMS IEC



TRANSFORMERS IEC


TRANSMITTANCE IEC IEC 61280-1-1 2013 Fibre optic communication subsystem basic test procedures - P.1-1: Test


TRUCKS ISO ISO 15222 2011 Truck and bus tyres - Method for measuring relative wet grip performance -

Loaded new tyres /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

TURBINES IEC IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind



TYRES ISO

ISO 15222 2011 Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres /By International Organization for Standardization (ISO). Geneva: ISO, 2011.


ULTRASONIC DEVICES IEC


ULTRASONIC FREQUENCIES IEC


ULTRASONIC - MEDICAL APPARATUS IEC


ULTRASONIC TESTING IEC

IEC/TR 62781 2012 Ultrasonics - Conditioning of water for ultrasonic measurements /By International Electrotechnical Commission (IEC). Geneva: IEC, 2012.

ULTRASONICS IEC




ULTRAVIOLET RADIATION ISO ISO 20846 2011 Petroleum products - Determination of sulfur content of automotive fuels -

Ultraviolet fluorescence method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2011.

UNIT LOADS ISO ISO 3394 2012 Packaging - Complete, filled transport packages and unit loads - Dimensions of



VACUUM DEVICES ISO ISO 27893 2011 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of

results of calibrations by direct comparison with a reference gauge /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

VACUUM GAUGES ISO ISO 3567 2011 Vacuum gauges - Calibration by direct comparison with a reference gauge /By

International Organization for Standardization (ISO). Geneva: ISO, 2011.

VALVES IEC IEC 61954 2011 Static var compensators (SVC) - Testing of thyristor valves /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.

ISO ISO 13341 2010 Gas cylinders - Fitting of valves to gas cylinders /By International Organization



VAPOURS ISO

ISO 14268 2012 Leather - Physical and mechanical tests - Determination of water vapour permeability /By International Organization for Standardization (ISO) and International Union of Leather Technologists and Chemists Societies (IULTCS). 2nd ed. Geneva: ISO, 2012.

VERIFICATION IEC IEC/PAS 62814 2012 Dependability of software products containing reusable components -


VIBRATION IEC IEC 60068-2-57 2013 Environmental testing - P.2-57: Tests - Test Ff: Vibration - Time-history and

sine-beat method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

VIBRATION TESTING IEC IEC 60068-2-57 2013 Environmental testing - P.2-57: Tests - Test Ff: Vibration - Time-history and

sine-beat method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013. IEC 60068-2-65 2013 Environmental testing - P.2-65: Tests - Test Fg: Vibration - Acoustically

induced method /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

VOCABULARY IEC IEC 60469 2013 Transitions, pulses and related waveforms - Terms, definitions and algorithms

/By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

VOLTAGE IEC IEC 61083-2 2013 Instruments and software used for measurement in high-voltage and high-

current tests - P.2: Requirements for software for tests with impulse voltages and currents /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.


VOLTAGE CONTROL IEC IEC 61083-2 2013 Instruments and software used for measurement in high-voltage and high-

current tests - P.2: Requirements for software for tests with impulse voltages and currents /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

VOLTAGE FLUCTUATIONS IEC IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - P.3-3: Limits - Limitation of voltage

changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

VOLTAGE MEASUREMENT IEC IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - P.3-3: Limits - Limitation of voltage

changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2013.

IEC 61083-2 2013 Instruments and software used for measurement in high-voltage and high-current tests - P.2: Requirements for software for tests with impulse voltages and currents /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2013.

VULCANIZED MATERIALS ISO ISO 36 2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics

/By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2011.

VULCANIZED RUBBER ISO ISO 1432 2013 Rubber, vulcanized or thermoplastic - Determination of low-temperature

stiffening (Gehman test) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2013.



WARNING DEVICES IEC


WASTE-WATER DRAINAGE ISO


WATER IEC


ISO

ISO 5667-21 2010 Water quality - Sampling - P.21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

WATER CONTENT DETERMINATION BSI

BS EN 15948 2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2012.


WATER HEATERS IEC


WATER - QUALITY ISO ISO 5667-21 2010 Water quality - Sampling - P.21: Guidance on sampling of drinking water

distributed by tankers or means other than distribution pipes /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

ISO 14403-1 2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - P.1: Method using flow injection analysis (FIA) /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

ISO 14403-2 2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - P.2: Method using continuous flow analysis (CFA) /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

ISO 21338 2010 Water quality - Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

WATER - QUALITY CONTROL ISO ISO 11352 2012 Water quality - Estimation of measurement uncertainty based on validation and

quality control data /By International Organization for Standardization (ISO). Geneva: ISO, 2012.

WATER TRANSPORT ENGINEERING IEC



WATER TRANSPORT ENGINEERING COMPONENTS IEC



WATER TURBINES IEC IEC/TS 62600-200 2013 Marine energy - Wave, tidal and other water current converters - P.200:

Electricity producing tidal energy converters - Power performance assessment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

WAVE PHYSICS IEC


WAVE PROPERTIES AND PHENOMENA IEC


WAVEFORMS IEC



WELD METAL ISO ISO 4136 2012 Destructive tests on welds in metallic materials - Transverse tensile test /By

International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2012.

WELDING ISO ISO 17636-2 2013 Non-destructive testing of welds - Radiographic testing - P.2: X - and


WIND-ELECTRIC POWER STATIONS IEC IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind


WIND POWER IEC IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind


WIND TURBINES IEC IEC 61400-12-2 2013 Wind turbines - P.12-2: Power performance of electricity - producing wind


WINDOWS BSI BS EN 1630 2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar



WIRE TRANSMISSION (TELECOMMUNICATION) IEC


WIRES IEC


X-RAYS ISO

ISO 17636-2 2013 Non-destructive testing of welds - Radiographic testing - P.2: X - and gamma-ray techniques with digital detectors /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ZINC COATINGS ISO

ISO 3575 2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2011.


มาตรฐานไทย

การก่อสร้าง

มอก. 2596 เลม่ 1 2556 ความปลอดภัยในงานก่อสร้าง เล่ม 1 การบริหารความปลอดภัยทั่วไป

การจัดการองค์การ

มอก. 9999 เลม่ 1 2556 แนวทางเศรษฐกิจพอเพียงภาคอุตสาหกรรม

การบริหารความปลอดภัย


การบริหารองค์การ


ความปลอดภัยในงานก่อสร้าง


คอนกรีต

มอก. 2542 เลม่ 2 2556 อาคารคอนกรีต เล่ม 2 วัสดุที่ใช้ในอาคารคอนกรีต

สีย้อมและการย้อมสี

มอก. 2532 2554 สีย้อมสังเคราะห์: สีแอซิด

องค์การ - การจัดการ


องค์การ - การบริหาร


อาคาร

มอก. 2542 เลม่ 2 2556 อาคารคอนกรีต เล่ม 2 วัสดุที่ใช้ในอาคารคอนกรีต


Alphabetical subject index

Subject หน้า

Accelerated testing 1

Accuracy 1

Acoustic equipment 1

Acoustic measurement 1

Acoustic testing 2

Acoustics 2

Adhesion 2

Adhesion tests 2

Aggregates 3

Air - Analysis 3

Air conditioners 3

Air pollution 3

Airborne sound insulation 4

Aircraft components 4

Alarm systems 4

Alloys 4

Amplifiers 4

Anaesthetic equipment 5

Anemometers 5

Animal fats 5

Anti-burglar measures 6

Anti-slip surfaces 6



Approval testing 6

Aquaria (ornamental) 6

Arc-welding equipment 7

Assessed quality 7

Atomic absorption spectrometric method 7

Attenuation 7

Attenuators 7

Audio amplifiers 8

Audio equipment 8

Audio systems 8

Auditing 8

Austenitic steels 8

Authentication 8

Automatic control systems 9

Automotive fuels 9

Beads 10

Bend testing 10

Block diagrams 10

Bolts 10

Bores 10

Braking systems 10

Brazing 11

Breaking capacity 11



Broadcasting 11

Broadcasting networks 11

Buildings 11

Bus networks 12

Calculation checks 12

Calibration 12

Capacitors 12

Cereal food products 13

Cereal products 13

Cereals 13

Certification 13

Chairs 14

Charts 14

Chemical analysis and testing 14

Chemical-resistance tests 14

Circuit diagrams 14

Circuits 15

Classification systems 15

Clearance distances 15

Climate 15

Climatology 15

Clinical investigation instruments 16

Coated fabrics 16



Coaxial connectors 16

Coded representation 16

Codes 16

Coding (data conversion) 16

Communication equipment 17

Communication networks 17

Communication technology 18

Compatibility 18

Components 18

Composite materials 19

Computer applications 19

Computer hardware 19

Computer networks 19

Computer programs 20

Computer software 20

Computer technology 21

Computerized control 21

Computers 21

Conduits (hydraulic) 21

Conformity assessment 22

Connectors 22

Construction materials 22

Construction systems parts 22



Consumer-supplier relations 22

Contracts 23

Control charts 23

Control devices 23

Control equipment 23

Control systems 24

Controllers 24

Cooking appliances 24

Corrosion resistance 24

Coupled circuits 25

Creep 25

Crime prevention devices 25

Crystal filters 25

Curtain walling 26

Dangerous materials 26

Data 26

Data elements 26

Data handling 26

Data processing 27

Data processing equipment 28

Data recording 28

Data representation 28

Data security 28



Data storage protection 29

Data transfer 29

Data transmission 31

Dental equipment 31

Dentistry 31

Design 31

Designations 32

Destructive testing 32

Detectors 32

Determination of content 32

Diagnosis (medical) 32

Diagrams 33

Diameter measurement 33

Diesel fuels 33

Digital audio broadcasting 33

Digital signals 33

Digital video broadcasting 34

Dimensions 34

Discharge lamps 34

Display devices 34

Display devices (computers) 34

Documents 35

Domestic electrical installations 35



Doors 35

Drawings 35

Drilling (mineral extraction) 36

Drilling rigs 36

Durability 36

E-books 36

E-publishing 36

Earth electrodes 37

Earth moving equipment 37

Earthing 37

Educational equipment 37

Educational facilities 37

Electric connectors 37

Electric contacts 38

Electric control equipment 38

Electric convertors 39

Electric current 39

Electric generators 40

Electric heaters 40

Electric lamps 40

Electric plugs 40

Electric power distribution 41

Electric power generation 41



Electric power networks 41

Electric power stations 42

Electric power system disturbances 42

Electric power systems 42

Electric power transmission 44

Electric power transmission lines 44

Electric screens 44

Electric sockets 45

Electric substations 45

Electrical components 45

Electrical connections 47

Electrical engineering 47

Electrical equipment 48

Electrical heating elements 51

Electrical household appliances 51

Electrical impedance 51

Electrical installations 52

Electrical insulating materials 52

Electrical insulation 53

Electrical measurement 54

Electrical measuring instruments 54

Electrical medical equipment 55

Electrical properties and phenomena 55



Electrical protection equipment 55

Electrical resistance 56

Electrical resistivity 56

Electrical safety 56

Electrical testing 57

Electrical tolerances 58

Electrical wave measurement 58

Electrically-operated devices 59

Electricity supply meters 59

Electromagnetic compatibility 59

Electromagnetic compatibility (EMC) 60

Electromagnetic fields 60

Electromagnetic radiation 61

Electromechanical devices 61

Electronic equipment and components 61

Electrostatics 65

Elongation 65

Emission 65

Emission measurement 65

Endurance testing 66

Energy consumption 66

Energy technology 66

Engineering drawings 67



Environmental engineering 67

Environmental management 67

Environmental testing 67

Equipment safety 68

Esters (carboxylic) 68

Estimation 69

Fasteners 69

Fatty acids 69

Ferrous alloys 69

Ferrous metals 69

Ferrules 70

Fibre optic cables 70

Fibre optic connectors 70

Fibre optics 72

Films (states of matter) 74

Fire risks 74

Fire tests 74

Fitness for purpose 75

Fittings 75

Flanges 75

Flexible pipes 75

Flexometer 76

Fluid flow 76



Fluorescent materials 76

Folding shutters 76

Food manufacturing processes 76

Food microbiology 77

Food technology 77

Food testing 77

Footwear 77

Freight transport 77

Functional analysis 78

Furnaces 78

Furniture 78

Furniture accessories 79

Fuse-holders 79

Fuse-links 79

Fuses 79

Gamma-ray apparatus 79

Gas cylinders 80

Gas valves 80

Gases 80

Gauges 80

Germanium 80

Glass 80

Glass - Laminates 81



Graphic representation 81

Graphic symbols 81

Greenhouse gases 81

Grilles 81

Hand-portable lamps 81

Hazards 82

Health services 82

Heat pumps 82

Heat transfer 83

Heaters 83

Heating equipment 83

Hexagonal-head fasteners 83

High voltage 83

High-voltage equipment 84

Hot-dip coating 84

Hot rolled products 84

Household equipment 84

Human body 84

Identification methods 84

Impedance measurement 85

Impulse turbines 85

Impulse voltages 85

Incandescent lamps 85



Information exchange 86

Information technology 88

Infrared radiation 88

Inspection by attributes 88

Installation 88

Instructions for use 89

Integrated circuits 89

Interfaces 89

Interfaces (data processing) 90

Ironmongery (buildings) 91

Irrigation works 91

Irrigation works - Terminology 91

Keys 91

Knobs (handles) 91

Laboratories 92

Laboratories - Measurement 92

Laboratory equipment 92

Laminated glass 92

Laminates 93

Latches 93

Leakage paths 94

Leather 94

Leather - Colour-fastness tests 94



Letters (symbols) 94

Lever handles 95

Life cycle 95

Life (durability) 95

Lighting equipment 95

Lightning protection 95

Liquid crystal devices 96

Liquid fuels 96

Load measurement 96

Lock cylinders 96

Locks 96

Low voltage 97

Luminaires 97

Luminous flux 97

Machine tool components 97

Magnesium 97

Magnetic fields 98

Magnetic materials 98

Magnetic measurement 98

Magnetic properties of materials 98

Magnetism 99

Management 99

Marine instruments 99



Marine navigation 100

Marine transport 100

Marking 101

Materials handling 101

Mathematical models 101

Measurement 101

Measuring instruments 101

Measuring relays 102

Mechanical control systems 102

Mechanical measurement 102

Mechanical testing 102

Medical equipment 103

Medical instruments 104

Medical radiography 104

Meteorological measurement 104

Meters 105

Microbiological analysis 105

Microbiology 105

Mixtures 106

Moisture measurement 106

Mortice latches 106

Moulded materials 106

Multimedia systems 106



Nacelles 107

Navigation 107

Neutrons 107

Noise (environmental) 107

Noise (spurious signals) 107

Non-destructive testing 108

Nuclear-electric power stations 108

Nuclear magnetic resonance spectrometry 108

Nuclear reactors 109

Nuclear safety 109

Nuclear technology 109

Nuts (fasteners) 109

Objects (programming language) 109

Occupational safety 110

Offshore construction works 110

Open systems interconnection 110

Ophthalmic equipment 110

Optical communication systems 111

Optical density 111

Optical dispersive power 112

Optical fibres 112

Optical measurement 113

Optical properties of materials 114



Optoelectronic devices 114

Overhead contact lines 115

Overhead power lines 115

Oxidation resistance 115

Packages 115

Packaging 115

Packaging processes 116

Patient transport equipment 116

Pendulums 116

Performance 116

Performance testing 117

Petroleum extraction 118

Petroleum products 118

Petroleum technology 118

Photons 119

Physiotherapy 119

Pipe flanges 119

Pipelines 119

Pipes 120

Pipework systems 121

Plastics 120

Plastics and rubber technology 120

Pneumatic control systems 120



Pollutant gases 121

Pollution control 121

Polymers 121

Power control (electric) 121

Power measurement (electric) 121

Power transformers 122

Printed-circuit boards 122

Printed circuits 122

Process control 122

Product design 123

Production equipment 123

Programming 123

Protected electrical equipment 124

Protective equipment 124

Protective relays 124

Proteins 124

Publishing 124

Pulse circuits 125

Pumps 125

Qualification approval 125

Quality assurance 125

Quality assurance systems 125

Quality control 126



Racks 126

Radiation hazards 126

Radiation measurement 126

Radiation protection 126

Radio disturbances 127

Radio equipment 127

Radio properties of electricity 128

Radio waves 128

Radioactive materials 128

Radiocommunication 128

Radiofrequencies 129

Radiographic testing 129

Radiology apparatus (medical) 129

Radionuclides 129

Railway applications 130

Railway equipment 130

Railway vehicle components 130

Railway vehicles 130

Rated voltage 130

Receivers 131

Recording systems 131

Rectangular shape 131

Reed relays 131



Reflective materials 132

Reinforced materials 132

Relays 132

Reliability 133

Resins (natural) 133

Resonance 133

Respirators 133

Retroreflective materials 134

Rigid pipes 134

Risk analysis 134

Risk assessment 134

Road marking 135

Road vehicles 135

Roller shutters 135

Rubber 136

Safety colours 136

Safety engineering 136

Safety glass 136

Safety glass - Buildings 137

Safety measures 137

Salmonella 138

Sampling methods 138

Sampling tables 138



Security systems in buildings 138

Sediment 138

Seismic coefficient 139

Seismic loading 139

Semantics 139

Semiconductor devices 139

Sensitivity 139

Sewing machinery 140

Sheet materials 140

Shields 140

Shunt reactors 140

Shutters (buildings) 140

Signal distortion 141

Signals 141

Signs 141

Smoke 141

Software engineering techniques 141

Software techniques 142

Solid electrical insulating materials 142

Sound insulation 142

Specimen preparation 142

Spectacle tenses 142

Spectroscopy 143



Spectrum analyzers 143

Speech transmission systems 143

Statistical methods of analysis 143

Statistical testing 144

Steels 144

Storage 144

Storage equipment 144

Storage furniture 145

Storage water heaters 145

Strain 145

Strength of materials 145

Stress analysis 145

Suction hoses 146

Sulphur 146

Superconductors 146

Surface mounting 146

Surface mounting devices 146

Surface spread of flame 146

Surge limiters 147

Surge protection 147

Switches 147

Switchgear 147

Symbols 148



Syntax 148

Systems analysis 148

Technical documents 148

Telecommunication 148

Telecommunication systems 149

Television broadcasting 149

Television receivers 150

Tensile loading 150

Tension set 150

Terminology 150

Test equipment 151

Test models 151

Test specimens 152

Testing 152

Testing conditions 152

Textiles 153

Thermal protection 153

Thermal testing 153

Thermosetting polymers 154

Threads 154

Thyristors 154

Trace heating systems 154

Transformers 155

Transmittance 155



Trucks 155

Turbines 155

Tyres 155

Ultrasonic devices 156

Ultrasonic frequencies 156

Ultrasonic - Medical apparatus 156

Ultrasonic testing 156

Ultrasonics 156

Ultraviolet radiation 157

Unit loads 157

Vacuum devices 157

Vacuum gauges 157

Valves 157

Vapours 158

Verification 158

Vibration 158

Vibration testing 158

Vocabulary 158

Voltage 158

Voltage control 159

Voltage fluctuations 159

Voltage measurement 159

Vulcanized materials 159

Vulcanized rubber 159



Warning devices 160

Waste-water drainage 160

Water 160

Water content determination 160

Water heaters 161

Water - Quality 161

Water - Quality control 161

Water transport engineering 161

Water transport engineering components 162

Water turbines 162

Wave physics 162

Wave properties and phenomena 162

Waveforms 162

Weld metal 163

Welding 163

Wind-electric power stations 163

Wind power 163

Wind turbines 163

Windows 163

Wire transmission (telecommunication) 164

Wires 164

X-rays 164

Zinc coatings 164


ดรรชนีหัวเรื่อง

หัวเรื่อง หน้า

การก่อสร้าง 165

การจัดการองค์การ 165

การบริหารความปลอดภัย 165

การบริหารองค์การ 165

ความปลอดภัยในงานก่อสร้าง 165

คอนกรีต 165

สีย้อมและการย้อมสี 165

องค์การ - การจัดการ 165

องค์การ - การบริหาร 165

อาคาร 165