acura integra
TRANSCRIPT
-
8/20/2019 Acura Integra
1/3
ACURA INTEGRA
1997 > 2001
-
8/20/2019 Acura Integra
2/3
Procedure
NOTE : This system enables 4 remote transmitters to be programmed.When a 5th remote transmitter is programmed the 1st remote transmitteris erased and replaced with the new one. To remove all programmed remotetransmitters from memory you must program a new remote transmitter in 4
times.
1. Switch ignition to ON.
2. PRESS and HOLD the VALET-DISARM button on the dashboardinstrumentcluster lower panel.
-
8/20/2019 Acura Integra
3/3
!. The LED on the top of steering column will FLASH when in programmingmode.
4. PRESS
theLOCK
button on the remote transmitter to be programmed.
". The par#ing lights will FLASH to con$rm programming.
%. &epeat steps 4 and 5 for any additional remote transmitters.
'. RELEASE the VALET-DISARM button to e(it programming mode.
). *hec# all remote transmitters for operation.