akp~:;;baho certificatemr. miodrag milanovic (ewe) mrs. dragana stankovic (lwe) mr. ivan jovanovic...
TRANSCRIPT
-
~ Ob-24/201~05-09 ~
~ ••••••••••••••••••••••••••••••••••••••••••••••••••• !.
~StandCert
StandCert d.o.o.ATC
Bulevar vojvode Misica 39a, Belgrade, Serbia AKP~:;;BAHOCEPT~cI>HKAl\~OHO
TEIIOS$lPS ISO/l[( 11021:2011
issues
CertificateNo. QS-OOOl
which confirms thatorganization
-
•
~ Ob-24/2016-0~9 ~~ =m&m~~EE~~................I.
~StandCert
StandCert d.o.o.ATe
Bulevar vojvode Misica 39a, Belgrade, Serbia AKP~:;;BAHOCEPT~~~KAl\~OHO
TEIIOSRPSIS0/1£C 17021:2011
issues
CertificateNo. ES-0020
which confirms thatorganization
CbGOSAFOMv
GOSA FOM a.d.Industrijska 70, Smederevska Palanka, Serbia
has Environmental Management System which is in compliance withstandard
SRPS ISO 14001:2015scope
production of equipment, welded structures, cranes and hoists, reducinggears and machines
Date of issue: 2017-06-30Certified since: 2014-06-30The last certification cycle validity: 2017-06-29
Valid till: 2020-06-29Exclusively in case of satisfactory execution of surveilance
audits.
Director (
Mo ° /1sr~t 0' M SIrJana amc, . c.
-
~ Ob-24I 201f>-05-09 ~~ ~--••~~~~~~-=-===~~~~~~~~~~~~~!.
~StandCert
StandCert d.o.o. ATC08-$5
AKPEA~TOBAHO(EPTH~~KA~HOHO
TEJ10SRPS 150/1[( 17021:2011
Bulevar vojvode Misica 39a, Belgrade, Serbia
issues
CertificateNo.OH-OOlO
which confirms thatorganization
810BB FBIv
GOSA FOM a.d.Industrijska 70, Smederevska Palanka, Serbia
has Occupational Health and Safety Management System which is incompliance with standard
SRPS OHSAS 18001 :2008scope
production of equipment, welded structures, cranes and hoists, reducinggears and machines
Date of issue: 2017-06-30Certified since: 2014-06-30The last certification cycle validity: 2017-06-29
Valid till: 2020-06-29Exclusively in case of satisfactory execution of surveilance
audits.
Ill", ,, ,.Director /11!~
Mirjana Stante, M. Sc.
-
Manufacturer:
Plant(s):
Contract:
Valid until:
•00 .' EQ2720412
CERTIFICATETOV 500-W-0417.2016.001
GOSA FOM a.d.Industrijska 70RS - 11420 Smederevska Palanka
Industrijska 70RS - 11420 Smederevska Palanka
The above mentioned company fulfills the
comprehensive quality requirements for fusionwelding of metallic materials
according to
EN 150 3834-2
18053912
Oktober 2019
Munich, December 7,2016
Certification BodyMaterial and Welding Technology
-/-w.. < C2-J(Frank Steidl
Industrie Service
1\JV'®TOV SOD Industrie Service GmbH, Westendstr. 199,80686 Munich, Germany
-
Annex to certificate
TOV SOD-W-0417.2016.001
Induslrie Service
Blatt 1 von 2
The following range is certified according to EN ISO 3834-2
Base material(s):(Group(s)according 10 EN ISOITR 15608)
- Surface mining equipment- Mining equipment- Steel constructions- Steel bridges- Vessel construction- Cranes- Machinery and equipment for metallurgy- Systems for hydro-mechanical equipment
- 1.1, 1.2-3-8
Scope of production:
Dimension of items: Thickness up to 180 mm, max. length 22 m,max. (03500 mm, max. piece weight 100 t
Welding processes: 111(Process numbers according 10 EN ISO 4063) 121
135136138
Manual arc weldingSubmerged arc welding with solid wire electrodeMAG welding with solid wire electrodeMAG welding with flux cored electrodeMAG welding with metal cored electrode
Welding supervisor:Deputies:
Mr. Miodrag Milanovic (EWE)Mrs. Dragana Stankovic (lWE)Mr. Ivan Jovanovic (IWE)
Personnel for non-destructive testing:Responsible: Mr. Miroslav Cvetkovic
Deputy: Mr. Sasa Boqdanovic
All other relevant data are detailed in our report no P-SRB-16-09-011-073.
Remarks:None
-
Annex to certificate
TOV SOO-W-0417.2016.001
Industrie servtce
Blatt 2 von 2General Provisions
Should one of the named welding and testing supervisors leave the company, or welding andtest procedures or important parts of equipment required for these procedures be changed orany of the welding-related quality assurance measures be modified, this must be reported be-forehand to TOV SOD Industrie Service GmbH (hereinafter referred to as TOV SOD). If neces-sary, TOV SOD will initiate a renewed inspection at the company. The same applies to the per-manent discontinuance of welding work.
Should there be any doubts pertaining to the qualification of the company, TOV SOD shall havethe right to inspect the company and to carry out tests at the company at any time without priornotification.
This certificate can be withdrawn, amended or modified with immediate effect and without anycompensation, if the conditions under which it was issued have changed or if the stipulationsand provisions outlined in this certificate or the pertinent report have not been observed.
This certificate shall become invalid if the welding supervisor named therein leaves the com-pany.
The authorization shall be suspended for as long as the company does not have a recognizedresponsible welding supervisor and no accepted deputy is on hand.
Application for renewal should be submitted to TOV SOD at least 2 months prior to expiry of thecertificate.
Invalid or revoked certificates must be returned immediately to TOV SOD.
This certificate may only be copied or published in its entirety for advertising and other pur-poses. The text of promotional material may not contradict this certificate.
-
Manufacturer:
Plant(s):
Inspection according:
Report no.:
Valid until:
IlIn.· EQ2720412
Industrie Service
CERTIFICATEruv SOD-DG-0418.2016.001
GOSA FOM a.d.Industrijska 70RS -11420 Smederevska Palanka
Industrijska 70RS -11420 Smederevska Palanka
AD 2000-Merkblatt HP 0 / HP 100 REN 13445-4, EN 13480-4,EN 12952-5, EN ISO 3834-2
The company
has facilities permitting manufacturing and inspection in compli-ance with the current technical standards,operates a quality system which guarantees that manufacturingand inspection of the products stated in our report are in conform-ity with the technical rules and standards,employs qualified supervisory and inspection personnel.
The company has the welding suitability for manufacturing pressureequipment according above mentioned standards.Independently of this certificate the requirements of the respectivelyselected module have to be considered within the framework of man-ufacturing pressure equipment according to Pressure Equipment Di-rective 2014/68/EU.
P-SRB-16-09-011-073
October 2019
Munich, December 7,2016
Certification BodyMaterial and Welding Technology
-f1~< CZJtFrank Steldl
T1"I\,@TOV SOD Industrie Service GmbH, Westendstr. 199,80686 Munich, Germany IVY
-
GFom_certificate_engISO_sertifikati_do20200629_engA9R93A3.tmpscan0001
EN ISO 3834-2 engscan0002
TUV_1090_1_doJul2017_eng
UNIDO_cert