aksesouar - ΛΑΣΠΟΤΗΤΕΣ ΦΤΕΡΑ
TRANSCRIPT
FENDER, SIDE EXTENSIONS, MUD GUARDS
5020, 5R, 6000, 6010, 6020, 6030, 6030 Premium, 7030 & 7030 E Premium, 7000, 7010, 7020, 7030, 8000, 8010, 8020, 8030 Series
John Deere Werke Mannheim Edition 07-2009 • EAME
TRACTORS
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 2
TURNABLE and RIGID FRONT fenders, REAR fenders, REAR Fender side extensions,
Mud flaps, Mud guards
CATALOGUE INDEX
TRACTOR SERIES PAGE
6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium.................. 3-8
6000, 6010........................................................................................................... 9-12
5020, 5R.…………………………………………………………………………........ 13-14
7000, 7010, 7020, 7030, 8020, 8030……………………………........................... 15-20
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 3
Front fenders, rear fenders, side extensions, mud guards 6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium Series tractors
FRONT FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
For safer high speed road transport and reduced tractor soiling. Large, full-coverage front fenders are available with a wide range of adjustments to adapt to the different tread settings to protect the cab from mud and debris.
Description Tractor Series Part No.
W 265 mm, L 1000 mm - RH or LH (2WD) 6020 & SE, 6015, 6030, 6025 AL180331
W 320 mm, L 1070 mm - RH or LH (MFWD) 6020 & SE, 6015 AL180328
W 370 mm, L 1280 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180330
W 420 mm, L 1440 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180327
W 420 mm, L 1315 mm - RH or LH (MFWD) 6020 & SE AL180329
W 480 mm, L 1440 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180326
W 540 mm, L 1540 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180325
W 620 mm, L 1560 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180332
W = Width, L = Length
Length
Width
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 4
TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Turnable front fenders allow a better steering angle - for easier and faster turning e.g. on the headland - and therefore significantly better manoeuvrability of the tractor.
Please find on the next page more information regarding front fender widths and corresponding tyre sizes.
Description Tractor Series Part No. Remark
W 370 mm, L 1280 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180096
W 420 mm, L 1440 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180098
W 480 mm, L 1440 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180100
W 540 mm, L 1540 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180102
W 620 mm, L 1560 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180104
For tractors with front loader, please order in addition if required:
Fender stop panel 4 cyl.: 1 x AL165335 6 cyl.: 1 x AL165336
Conversion kit from RIGID to TURNABLE front fenders
- with MFWD axle 730: 6020-6220 - with MFWD axle 730: 6320-6420S, 6020SE-6420SE - with MFWD axle 740: 6520 & SE, 6620 & SE - with MFWD axle 745/750: 6820-6920S - for tractors with MFWD: 6030 Premium, 7030 & 7030 E Premium
AL175211
Depending on the tractor options additional parts may be required, please check corresponding parts catalogue.
W = Width, L = Length RIGID FRONT FENDERS - FIELD INSTALLATION KITS Kits include rigid front fenders (RH & LH) plus the necessary hardware for field installation.
Please find on the next page more information regarding front fender widths and corresponding tyre sizes.
Description Tractor Series Part No.
W 265 mm, L 1000 mm (2WD only) 6020 & SE, 6015, 6030, 6025 AL180215
Base mounting kit for rigid front fenders (MFWD) 6020 & SE, 6015 AL71218
W 370 mm, L 1280 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180095
W 420 mm, L 1440 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180097
W 480 mm, L 1440 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180099
W 540 mm, L 1540 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180101
W 620 mm, L 1560 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180103
W = Width, L = Length
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 5
Overview of TURNABLE front fender widths in combination with corresponding tyre sizes
TURNABLE fender width Tyre sizes
370 mm 4 cyl.: 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28, 280/85R28, 12.4R28, 320/85R28, 13.6R28, 340/85R28
6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28
420 mm 4 cyl.: 380/70R24, 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
6 cyl.: 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
480 mm 4 cyl.: 440/65R24, 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28
6 cyl.: 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28, 16.9R28, 420/85R28, 480/70R28, 16.9R30, 420/85R30, 480/70R30
540 mm 4 cyl.: 540/65R24, VF 520/60R28
6 cyl.: 540/65R24, VF 520/60R28, 540/65R28, 540/65R30, 540/75R28
620 mm 6 cyl.: VF 600/60R28, 600/65R28, VF 600/60R30
Overview of RIGID front fender widths in combination with corresponding tyre sizes
RIGID fender width Tyre sizes
370 mm 4 cyl.: 280/70R16, 10.5/80-18, 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28, 280/85R28, 12.4R28, 320/85R28, 13.6R28, 340/85R28
6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28
420 mm 4 cyl.: 380/70R24, 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
6 cyl.: 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28
480 mm 4 cyl.: 440/65R24, 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28
6 cyl.: 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28, 16.9R28, 420/85R28, 480/70R28, 16.9R30, 420/85R30, 480/70R30
540 mm 4 cyl.: 540/65R24, VF 520/60R28
6 cyl.: 540/65R24, VF 520/60R28, 540/65R28, 540/65R30, 540/75R28
620 mm 6 cyl.: VF 600/60R28, 600/65R28
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 6
REAR FENDERS - INDIVIDUAL PARTS Additional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
Rear fender - RH 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium
AL168326
Rear fender - LH 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium
AL168325
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Rear fender side extensions tractors provide…
Protection from mud, stones and debris Protection to avoid dirt on your tractor and on the following
vehicles Better visibility through clear windows Coverage also of large tyres An easy installation in a few work steps
The extensions can be combined with snow chains on rear wheels, for example for forestry applications.
Description Tractor Series Tyre size Part No.
110 x 15 mm - RH L200789
110 x 15 mm - LH
cab only: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium
18.4R30, 16.9R34, 420/85R34, 480/70R34, 13.6R38, 18.4R38, 460/85R38 L200788
110 x 60 mm - RH L200784
110 x 60 mm - LH
cab only: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium
16.9R30, 18.4R30, 16.9R34, 18.4R34, 480/70R34, 13.6R38, 14.9R38, 16.9R38, 420/85R38, 18.4R38, 460/85R38, 480/70R38, 520/70R38, 540/65R38 L200783
200 x 20 mm - RH L200797
200 x 20 mm - LH
cab only: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium
520/70R38, 20.8R38, 520/85R38, 580/70R38, 600/65R38, 650/65R38 L200793
190 x 65 mm - RH L200787
190 x 65 mm - LH
cab only: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium
520/70R34, 520/70R38, 20.8R38, 520/85R38, 540/65R38, 600/65R38, 650/65R38 L200785
Rear fender
Side extension
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 7
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITS Kits include side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Tyre size Part No.
110 x 15 mm - RH & LH cab only: 6030, 6030 Premium, 7030 & 7030 E Premium 18.4R38, 460/85R38 AL174767
110 x 60 mm - RH & LH cab only: 6030, 6030 Premium, 7030 & 7030 E Premium
18.4R30, 16.9R34, 18.4R34, 480/70R34, 13.6R38, 14.9R38, 16.9R38, 420/85R38, 18.4R38, 460/85R38, 480/70R38, 520/70R38, 540/65R38
AL174768
200 x 20 mm - RH & LH cab only: 6030, 6030 Premium, 7030 & 7030 E Premium
520/70R38, 20.8R38, 520/85R38, 580/70R38, 600/65R38, 650/65R38 AL174769
190 x 65 mm - RH & LH cab only: 6030, 6030 Premium, 7030 & 7030 E Premium
520/70R34, 520/70R38, 20.8R38, 520/85R38, 540/65R38, 600/65R38, 650/65R38
AL174770
Mounting parts fender side extensions & mud guards
Order in addition, if required.
AL120094
MUD FLAP FOR REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Additional mud flaps significantly reduce the amount of spray and mud thrown up by the rear wheel. They provide additional protection to avoid dirt on your tractor and following vehicles which is especially important for heavy duty work and bad weather conditions. The result is a cleaner cab and better operator visibility.
Description Tractor Series Part No. Remarks
Mud flap - RH or LH cab only: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium L156612
Can be combined with side extension: - 190 x 65 mm - 190 / 200 x 20 mm
MUD FLAPS FOR REAR FENDERS - FIELD INSTALLATION KIT Kit includes mud flaps (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remarks
2 mud flaps - rear fenders
cab only: 6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium
AL159975 Can be combined with side extension: - 190 x 65 mm - 190 / 200 x 20 mm
Mud flap
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 8
MUD GUARDS FOR STEPS - INDIVIDUAL PARTS Additional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris.
Description Tractor Series Part No.
Mud guard - RH L116671
Mud guard - LH 4 cyl. models without suspended cab: 6020 & SE, 6030, 6030 Premium
L116670
Mud guard - RH L116673
Mud guard - LH
4 cyl. models with suspended cab: 6020, 6030 Premium
all 6 cyl. cab models: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium L116672 MUD GUARDS - FIELD INSTALLATION KITS Kits include mud guards (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
Mud guards - RH & LH 4 cyl. models without suspended cab: 6030, 6030 Premium AL174141
Mud guards - RH & LH 4 cyl. models with suspended cab: 6030 Premium
all 6 cyl. cab models: 6030, 6030 Premium, 7030 & 7030 E Premium AL174142
Mounting parts - fender side extensions & mud guards Order in addition, if required. AL120094
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 9
Front fenders, rear fenders, side extensions, mud flaps, mud guards 6000, 6010 Series tractors
FRONT FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
W 265 mm, L 1000 mm - RH or LH (2WD) 6000 & SE, 6010 & SE, 6005 AL180331
W 320 mm, L 1070 mm - RH or LH (MFWD) 6000, 6010 AL180328
W 370 mm, L 1280 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180330
W 420 mm, L 1440 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180327
W 420 mm, L 1315 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180329
W 480 mm, L 1440 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180326
W 540 mm, L 1540 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180325
W 620 mm, L 1560 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180332
W = Width, L = Length
TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
W 370 mm, L 1280 mm - RH & LH 6000 & SE, 6010 & SE AL180096
W 420 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL180098
W 480 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL180100
W 540 mm, L 1540 mm - RH & LH 6000 & SE, 6010 & SE AL180102
W = Width, L = Length
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 10
REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Models Part No. Remark
A Rear fender - RH L101648 with registration plate
A Rear fender - LH cab only: 6000, 6010
L101649 without registration plate
A Rear fender - RH L101643 without registration plate
A Rear fender - LH cab only: 6000, 6010
L101642 with registration plate
A Rear fender - RH L110271 with registration plate
A Rear fender - LH 6000SE, 6010SE
L110272 without registration plate
A Rear fender - RH L110885 without registration plate
A Rear fender - LH 6000SE, 6010SE
L110884 with registration plate
A Rear fender - RH L110885
A Rear fender - LH
with 2-post roll-guard: 6010 L110272
B Rear fender - RH L79685
B Rear fender - LH with 2-post roll-guard: 6000, 6010 L79683
C Rear fender - RH L77510
C Rear fender - LH 6000 & SE, 6010 & SE
L77511
RIGID FRONT FENDERS - FIELD INSTALLATION KITS Kit includes rigid front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
W 265 mm, L 1000 mm (2WD) 6000 & SE, 6010 & SE, 6005 AL180215
Base mounting kit for rigid front fenders (MFWD) 6000 & SE, 6010 & SE, 6005 AL71218
W = Width, L = Length
A C
B
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 11
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
A Side extension - RH L101638
A Side extension - LH cab only: 6000 & SE, 6010 & SE
L101534
B Side extension - LH or RH cab only: 6000 & SE, 6010 & SE L101609
C Additional side extension - extra wide, LH or RH only in combination with A or B
cab only: 6000, 6010 & SE L110877
MUD FLAP FOR REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark
Mud flap - RH cab only: 6000, 6010 & SE L110876
Mud flap - LH cab only: 6000, 6010 & SE L110875
For tractors with fender side extensions (A or B see above) already installed.
MUD FLAP KIT FOR REAR FENDERS - FIELD INSTALLATION KIT Kits include mud flaps (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remark
2 mud flaps - rear fenders
cab only: 6000, 6010 & SE AL81709 For tractors with fender side extensions (A or B see above) already installed.
B
A C
Mud flap
Side extension already installed
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 12
MUD FLAPS FOR REAR FENDERS / EXTRA WIDE - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark
Mud flap, extra wide - RH L110611
Mud flap, extra wide - LH
cab only: 6000, 6010 & SE
L110610
These mud flaps are recommended if one side extension, plus the additional side extension L110877 are already installed on each fender.
MUD GUARDS FOR STEPS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
Mud guard - RH L111350
Mud guard - LH
4 cyl. cab models: 6000, 6010 & SE
L111348
Mud guard - RH L111351
Mud guard - LH
6 cyl. cab models: 6000, 6010 & SE L111349
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 13
Front fenders, rear fenders, side extensions 5020 and 5R Series tractors
FRONT FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
W 320 mm, L 1070 mm - RH or LH 5020 AL180328
W 370 mm, L 1280 mm - RH or LH 5020, 5R AL180330
W 420 mm, L 1440 mm - RH or LH 5020, 5R AL180327
W 420 mm, L 1315 mm - RH or LH 5020 AL180329
W 480 mm, L 1440 mm - RH or LH 5020, 5R AL180326
W = Width, L = Length TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Tyre sizes
W 370 mm, L 1280 mm 5020, 5R LG102498 11.2R20, 12.4R24, 320/85R24, 11.2R28, 280/85R28
W 420 mm, L 1440 mm 5020, 5R LG102500 13.6R24, 340/85R24, 360/70R24, 380/70R24, 420/65R24
W 480 mm, L 1440 mm 5020, 5R LG102502 440/65R24
W = Width, L = Length RIGID FRONT FENDERS - FIELD INSTALLATION KITS Kits include rigid front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
Base mounting kit for rigid front fenders 5020 LG100707
W 370 mm, L 1280 mm 5020, 5R LG102499
W 420 mm, L 1440 mm 5020, 5R LG102501
W 480 mm, L 1440 mm 5020, 5R LG102503
W = Width, L = Length
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 14
REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
Rear fender - RH R252621
Rear fender - LH 5020, 5R
R252619
Rear fender - RH RE259007
Rear fender - LH vineyard tractor version only: 5020; 5RN
RE259006
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No.
Side extension RH 5020, 5R R180913
Side extension LH 5020, 5R R180912
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KIT Kit includes rear fender side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No.
Rear fender side extension - RH & LH 5020, 5R LG100448
Rear fender
Side extension
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 15
Front fenders, rear fenders, side extensions, mud guards 7000, 7010, 7020, 7030 and 8020, 8030 Series tractors
FRONT FENDERS - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
W 394 mm - RH or LH 7000, 7010, 8000
with 2WD only AR86406 EPDC
W 480 mm - RH or LH 7000, 7010, 7020 R192450 7020: up to serial no. 032704
W 480 mm - RH or LH 8000, 8010, 8020 R191189 8020: up to serial no. 015456
W 480 mm - RH 7020, 7030, 8020, 8030 RE223407
W 480 mm - LH 7020, 7030, 8020, 8030 RE223406
7020: from serial no. 032705
8020: from serial no. 015457
EPDC
W 620 mm - RH 7000, 7010, 7020, 8000, 8010, 8020 R192452
W 620 mm - LH 7000, 7010, 7020, 8000, 8010, 8020 R192451
7020: up to serial no. 032704
8020. up to serial no. 027762
W 620 mm - RH 7020, 7030, 8020, 8030 RE223409
W 620 mm - LH 7020, 7030, 8020, 8030 RE223408
7020: from serial no. 032705
8020: from serial no. 027763
EPDC
W = Width
2WD FRONT FENDERS - FIELD INSTALLATION KITS Kits include front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Order through
394 mm - RH & LH 7000, 7010 RE67850
394 mm - RH & LH 8000 RE67851 EPDC
W = Width
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 16
DELUXE TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remark Order through
W 480 mm - RH & LH 7020 RE211530 7020: up to serial no. 032704
W 480 mm - RH & LH 7020, 7030 RE238910 7020: from serial no. 032705
W 620 mm - RH & LH 7020 RE211529 7020: up to serial no. 032704
W 620 mm - RH & LH 7020, 7030 RE238909 7020: from serial no. 032705
Complete Goods
W 480 mm - RH & LH 8020 RE188512 8020: up to serial no. 015456
W 480 mm - RH & LH 8020, 8030 RE236666 8020. from serial no. 015457 8030: up to serial no. 007241
W 480 mm - RH & LH 8030
with 1300 Series MFWD front axle only
RE260608 8030: from serial no. 007242
W 480 mm - RH & LH 8030
with 1500 Series MFWD front axle only
RE308214
W 480 mm - RH & LH 8020, 8030
with ILS*) only RE236667
Complete Goods
W 620 mm - RH & LH 8020 RE188513 8020: up to serial no. 027762
W 620 mm - RH & LH 8020, 8030 RE236669 8020: from serial no. 027763 8030: up to serial no. 007241
W 620 mm - RH & LH 8030
with 1300 Series MFWD axle only
RE260609 8030: from serial no. 007242
Complete Goods
W 620 mm - RH & LH 8030
with 1500 Series MFWD front axle only
RE308215
W 620 mm - RH & LH 8020, 8030
with ILS*) only RE236670
Complete Goods
*) ILS = Independent Link Suspension; W = Width
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 17
REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
RH 7000 R110834
LH 7000 R110835 EPDC
RH 7010 R131968
LH 7010 R131969 without remote PTO
LH 7010 R176979 with remote PTO
EPDC
RH 8000 R111888
LH 8000 R111887 up to serial no. 009999
RH 8000, 8010 R131966
LH 8000, 8010 R131967 from serial no. 010000
EPDC
RH - without fender extension installed 7020, 7030, 8020, 8030 R162233
LH - without fender extension installed 7020, 7030, 8020, 8030 R162234
EPDC
RH - with fender side extension installed (2.50 m width)
7020, 7030, 8020, 8030 R163025
LH - with fender side extension installed (2.50 m width)
7020, 7030, 8020, 8030 R163026
EPDC
Rear fender
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 18
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
RH 7000 R114745
LH 7000 R106378 EPDC
RH 8000 R122008
LH 8000 R122007 up to serial no. 009999 EPDC
RH - 2.30 m width 7010, 8000, 8010 R130503
LH - 2.30 m width 7010, 8000, 8010 R130504
RH - 2.50 m width 7010, 8000, 8010 R130505
LH - 2.50 m width 7010, 8000, 8010 R130506
from serial no. 010000 EPDC
RH - 2.50 m width 7020, 8020, 8030 R162235
LH - 2.50 m width 7020, 8020, 8030 R162236 EPDC
RH 7030 R237642
LH 7030 R237645 EPDC
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITS Kits include side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Order through
RH & LH - 2.50 m width 7020, 8020, 8030 RE210326
RH & LH - 2.50 m width 7030 RE253151 Complete Goods
Rear fender side extension (2.50 m width) 7030 Series shown Rear fender side extension
(2.50 m width) - 7010 Series shown
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 19
ADDITIONAL REAR FENDER SIDE EXTENSIONS / EXTRA WIDE - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Remark Order through
B - extra wide - RH 2.75 m width 7030, 8030 R233543
B - extra wide - LH 2.75 m width 7030, 8030 R233544
The additional side extensions B can only be installed in combination with
side extensions A (see photo above).
If total vehicle width exceeds 2.55 m, extremity lighting is required (also
depending on national regulations).
Please check the corresponding parts catalogue for more details.
EPDC
ADDITIONAL REAR FENDER SIDE EXTENSIONS / EXTRA WIDE - FIELD INSTALLATION Kit includes additional side extensions (RH & LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Remark Order through
B - extra wide - RH & LH
2.75 m width
7030, 8030 RE253154
The additional side extensions B can only be installed in combination with
side extensions A (see photo above).
If total vehicle width exceeds 2.55 m, extremity lighting is required (also
depending on national regulations).
Please check the corresponding parts catalogue for more details.
EPDC
B - Additional fender side extension -
extra wide (2.75 m)
A - Fender side extension (2.50 m)
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 20
MUD GUARDS FOR STEPS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Order through
Mud guard - RH 7020, 7030, 8030 RE205744
Mud guard - LH 7020, 7030, 8030 RE205743 EPDC
MUD GUARD FOR STEPS - FIELD INSTALLATION KIT Kit includes mud guard (LH) plus the necessary hardware for field installation.
Description Tractor Series Part No. Order through
Mud guard for LH step 7020, 7030 RE215510 Complete Goods
MUD FLAP FOR REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Description Tractor Series Part No. Order through
Mud flap - RH 7000, 7010 R118067
Mud flap - LH 7000, 7010 R118068 EPDC