2+ product sheet
Post on 21-Feb-2022
3 Views
Preview:
TRANSCRIPT
Rapid2+ product sheet
1 / 4© Schletter GmbH • Gewerbegebiet an der B15 • Alustraße 1 • 83527 Kirchdorf/Haag i. OB • Germany • Phone: +49 8072 9191-200Fax: +49 8072 9191-9200 • E-mail: solar@schletter.eu • www.schletter.eu • last update 11/2010 • subject to change without notice
Description Rapid2+ by Schletter is a completely newly devel-oped solar mounting system for pitched roofs. Rapid2+ makes mounting simple, safe, swift and uncomplicated like never before.
Application information One tool (Torx TX40) is enough to carry out all 4 mounting steps. As the componentsare systematically picked and packed, mounting time on the building site can be reduced. Carry out the mounting conveniently from above and even out roof unevennesses using height-adjustable roof hooks. The new hook geometry also improves the structural values. The Rapid2+ module clamps can be adapted indi-vidually to the respective module height. You only have to store 4 different components. The system can be combined with all kinds of mounting rails. We grant a voluntary 10-year warranty on Rapid²+ like on all Schletter mounting systems.
Rapid2+ The quick and convenient mounting system for pitched roofs
• Mountingtimeisconsiderablyreduced• Only4components(onlylittlestoragespacerequired)• Convenientmounting
Put on the rail and screw it
Rapid2+ - snap in the clamp and screw it
Adjust the height-adjustable Rapid2+ end clamp to the module height, snap it in and screw it or use fixed end clamps.
Mounttheroofhook
Rapid2+ product sheet
2 / 4 © Schletter GmbH • Gewerbegebiet an der B15 • Alustraße 1 • 83527 Kirchdorf/Haag i. OB • Germany • Phone: +49 8072 9191-200Fax: +49 8072 9191-9200 • E-mail: solar@schletter.eu • www.schletter.eu • last update 11/2010 • subject to change without notice
Rapid2+ roof hooksVA-quality,welded, symmetric bar arrangement, pre-assembled
Roof hook Rapid2+ 45
a b c d e f g h imm 45 110 116 60 150 35 5 6 30
inches 1.77 4.33 4.57 2.36 5.91 1.38 0.20 0.24 1.18
Comparable to: Eco-S 100004-000, 100004-001, 100009-000
Roof hook Rapid2+ 45V Like 101001-000, but for vertical rail mounting
a b c d e f g h imm 45 110 116 60 150 35 5 6 30
inches 1.77 4.33 4.57 2.36 5.91 1.38 0.20 0.24 1.18
Comparable to: Eco-S 100004-000, 100004-001, 100009-000
Roof hook Rapid2+ 35Like 101001-000, but 35mm/1.38 inches bracket height for low battens
a b c d e f g h imm 35 110 116 60 150 35 5 6 30
inches 1.38 4.33 4.57 2.36 5.91 1.38 0.20 0.24 1.18
Comparable to: Eco-S 100006-000
Roof hook Rapid2+ 55Like 101001-000, but 55mm/2.17 inches bracket height for high battens or big tile sizes
a b c d e f g h imm 55 110 116 60 150 35 5 6 30
inches 2.17 4.33 4.57 2.36 5.91 1.38 0.20 0.24 1.18
Roof hook Rapid2+ UniversalUniversally adjustable
a b c d e f g h imm 40-54 110 116 60 150 35 5 6 30
inches 1.57-2.13 4.33 4.57 2.36 5.91 1.38 0.20 0.24 1.18
Comparable to: Universal 100001-000
Roof hook Rapid2+ Max Like 101001, but with bar dimensions 35x8mm/1.38x0.31 inches for heavy snow loads
a b c d e f g h imm 45 110 116 60 150 35 6 8 30
inches 1.77 4.33 4.57 2.36 5.91 1.38 0.24 0.31 1.18
Comparableto:VaMax100010-000,100010-001,100011-000,100011-001
Roof hook Rapid2+ MaxV Like 101005-000, but for vertical rail mounting
a b c d e f g h imm 45 110 116 60 150 35 6 8 30
inches 1.77 4.33 4.57 2.36 5.91 1.38 0.24 0.31 1.18
Comparableto:VaMax100010-000,100010-001,100011-000,100011-001
101001-000(430 800)
101001-001(430 801)
101002-000(430 802)
101003-000(430 803)
101004-000(430 804)
101005-000(430 805)
101006-000(430 806)
a
bc
e
d
f
g material thickness
h material thickness
i
adjustable
Dimensional drawing to the charts
Rapid2+ product sheet
3 / 4© Schletter GmbH • Gewerbegebiet an der B15 • Alustraße 1 • 83527 Kirchdorf/Haag i. OB • Germany • Phone: +49 8072 9191-200Fax: +49 8072 9191-9200 • E-mail: solar@schletter.eu • www.schletter.eu • last update 11/2010 • subject to change without notice
System Rapid aluminum module clamps2+ - assembledincl. Torx M8 screw with serration on the lower side of the screw head and anti-friction coating
Middle clamp Rapid2+ 30 - 39mmUniversally applicable for module heights from 30-39mm/1.18-1.54 inches
Middle clamp Rapid2+ 40 - 50mmUniversally applicable for module heights from 40-50mm / 1.57- 1.97 inches End clamp Rapid2+ XXmm (30-50)For one module height in each case according to the last two digits of the item no.30 mm / 1.18 inches31 mm / 1.22 inches 32mm / 1.26 inches 33mm / 1.30 inches 34mm / 1.34 inches35 mm / 1.38 inches36 mm / 1.42 inches37 mm / 1.46 inches 38 mm / 1.50 inches 39 mm / 1.54 inches40 mm / 1.57 inches41 mm / 1.61 inches 42 mm / 1.65 inches43 mm / 1.69 inches44 mm / 1.73 inches45 mm / 1.77 inches46 mm / 1.81 inches 47 mm / 1.85 inches48 mm / 1.89 inches 49 mm / 1.93 inches50 mm / 1.97 inches
End clamp Rapid2+ 30 - 39mmUniversally applicable for module heights from 30-39mm / 1.18- 1.54 inches
End clamp Rapid2+ 40 - 50mmUniversally applicable for module heights from 40-50mm / 1.57- 1.97 inches Earthing middle clamp Rapid2+ 30-39mm assembledLike 131003-000, but with earthing (grounding) function
Earthing middle clamp Rapid2+ 40-50mm assembledLike 131003-001, but with earthing (grounding) function
131003-000(430 810)
131003-001(430 811)
131001-030 131001-031 131001-032 131001-033 131001-034 131001-035 131001-036 131001-037 131001-038 131001-039 131001-040131001-041 131001-042131001-043 131001-044 131001-045 131001-046 131001-047 131001-048 131001-049 131001-050(430830 - 430850)
131002-000(430 812)
131002-001(430 813)
135002-000(430 820)
135002-001(430 821)
Mountingplan
Rapid2+ product sheet
4 / 4 © Schletter GmbH • Gewerbegebiet an der B15 • Alustraße 1 • 83527 Kirchdorf/Haag i. OB • Germany • Phone: +49 8072 9191-200Fax: +49 8072 9191-9200 • E-mail: solar@schletter.eu • www.schletter.eu • last update 11/2010 • subject to change without notice
Technical data
Material Roof hooks and screws: Quality steel 1.4301KlickTop and clamps: Aluminum
Struc-tural analysis
Structural analysis according to the current national standards (in Germany DIN1055 and EC1). Information attachments based on structural analysis regarding the dimensioning of the numberofrequiredfixationspots.Forthispurpose,weputourchartsanddimensioningprograms at your disposal.By all means, pay regard to the information about structural safety!
Get all system prices fast and easy with our auto-calculator!
Onlywithatorquelimitationto12-14Nm!
Mounting information for Rapid2+ clamps
TheSchlettercompanyrecommendsnottouseatighteningtorqueofmorethan12-14Nmtofastentheclamp. Percussion drills as well as overlong Allen wrenches must not be used to mount the clamps. If you want to use a cordless screwdriver, please ask the manufacturer for information about the tightening torquesthatarecreatedwiththedifferentsettingsofthescrewdriver.Ifthetighteningtorqueistoohigh,the module frame and the clamps might get damaged. Examples
• Apercussiondrillhasamaximumtorqueof145Nmandisnotsuitableforthemountingofscrews.•Acordlessscrewdriverhasamaximumtorqueof16Nmandcanbeadjustedinsteps.
Do not use overlong wrenches!
Do not use percussion drills!
Do not use ratchets!©
Sch
lette
r Gm
bH, 2
010,
I400
032G
B, V
3
top related