6706 l2u214 powerpoint_4

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 1 of 14

PowerPoint presentation

Power tools

Unit 214: Manufacture bench joinery products

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 2 of 14

Power Tools and MachineryAlthough today we have a vast amount of machinery to choose from such as the modern 4 cutter CNC seen here.

The Bench Joinery industry used to get by with equipment such as a three cutter table saw.

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 3 of 14

Power suppliesIn small groups, identify the range of power supplies to operate power tools.

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 4 of 14

Hand Held Power Tools While most of you may be lucky enough to work with a medium to large sized joinery company, some will be with small a company (1-5 employees) who have a greater reliance on Bespoke Joinery work and the use of hand tools and hand held power tools. Again as in the previous slide H&S and ACoP are uppermost in the workshop rules and expectations.

On the following slides are the most common hand held power tools you will come across.

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 5 of 14

Hand held power tools

Nail GunBiscuit jointer Belt sander Power planer

Hammer drill Cordless angle drill

Pneumatic drillChop saw

Jigsaw

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 6 of 14

Saws

Band saw Sabre/reciprocating

Table sawChop saw

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 7 of 14

Sanding tools

Bench top sander Table top mortiser

Detail sander

Palm sander

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 8 of 14

Routers

Plunging Rebate Table

Plough

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 9 of 14

Power Tool Uses

Most of the power tools and their uses will be familiar to you as second year students. • Would you use a detail sander to remove a large amount of stock

from your material?

• would you use a reciprocating saw to cut down the cheeks of a tenon?

• so almost all the machinery and power tools at your disposal have an obvious use the most versatile one is arguably the hand held router why?

• What are the benefits of nail guns?

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 10 of 14

Power tool usesWhat are the benefits or power tools? List two of your own

What are the negatives with power tools? List two of your own

Level 2 Diploma in Bench Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 11 of 14

Any questions?