ad-100 obd ii scanner

AD-100 Auto Scanner AD-100 Auto Scanner

Features

Protocol

Diagnose

Operation

Features Features

Home

1. Displays Diagnostic Trouble Codes (DTC) and a short description.2. Works on any OBD-II compliant vehicle with a 16 pin data link connector (built after 1995).3. Works on latest CAN (Controller Area Network) equipped

vehicle.4. Reads and clears all generic and most manufacturer specific DTCs.5. Resets “Check Engine” of “Service Engine Soon” light.

Features Features

6. Views OBD-II freeze frame data, scans, records and plays back live data. Stores up to 38 scans.7. Displays Malfunction Indicator Lamp (MIL) status.8. Displays module readiness status.9. Retrieves Vehicle Identification Number (VIN).10. Supports 11 languages: English, German, French, Italian, Danish, Dutch, Spanish, Portuguese, Finnish, Norwegian and Swedish.

Home

Protocol Protocol

1. SAE-J1850 PWM.2. SAE-J1850 VP.3. ISO-14230.4. ISO-9141.5. ISO-15765-4 (CAN BUS)

Home

Keypad Functions Keypad Functions

Power button:ON or OFF Scan Tool.

Home

Keypad Functions Keypad Functions

Enter button: to perform the selected function ofthe menu.

Home

Keypad Functions Keypad Functions

NO button: for cancelingthe operation or returnback by pressing this button.

Home

Keypad Functions Keypad Functions

Help button: explainthe abbr. letters duringoperation.

Home

Keypad Functions Keypad Functions

Page-Up roll button.

Home

Keypad Functions Keypad Functions

Page-Down roll button.

Home

Display Functions Display Functions

Diagnostic Trouble Codes Display Area.

PENDING Icon.

DTC Definitions.

DTC Number Sequence.

G/E instruction.

Link Icon.

LED instruction.

Home

Diagnose Diagnose

Connect the Scan Tool cableconnector to the vehicle's DLC.

When the connection has been established, Press the powerbutton, the Scan tool will lightup and display as above.

Home

Diagnose Diagnose

If the vehicle DiagnosticProtocol is OBD-II, But the DTCCode is MANUFACTORYPlease press UP or DN button,then press yes, the screen will change to above.

Press the enter button once, the Scan tool will automatically start to communicate the ECU ofvehicle and search which type of communication protocol is using.

Home

Diagnose : Read DCTs Diagnose : Read DCTs

Press the Enter Button, thescreen will change to above.

Press the Help Button, viewmore help information.

Home

Diagnose : Erase DCTs Diagnose : Erase DCTs

Return to Previous Menu,Select Erase DTCs.

Press the [YES], the screen willchange to: Erase is successful!

Home

Diagnose : View Live Data Diagnose : View Live Data

Return to Previous Menu,Select Live Data.

Press the Enter Button, thescreen will change to above.Use the Page-Up and Page-DNRoll Button to view other sensors.

Home

Diagnose : View Live Data Diagnose : View Live Data

Press the Help Button, view more help information.

Home

Support Manufactory Support Manufactory

Acura Geo Land Rover Subaru

Alfa Romeo GM Lexus Suzuki

Audi Honda Mazda Toyota

BMW Hyundai Mercedes Volkswagen

Chrysler Infiniti Mitsubishi Volvo

Ford Isuzu Nissan …

Ford Diesel Jaguar Porsche

Kia Saab Saturn

Home