catalogo prodotti · catalogo prodotti product catalogue . l’azienda la envasald snc nasce nel...
Post on 23-Jul-2020
10 Views
Preview:
TRANSCRIPT
cAtALogo proDottiProducT cATAloGuE
www.envasald.com
Catalogo prodottiProduct cataloguE
l’azienda la Envasald Snc nasce nel 2003 dopo un’esperienza ventennale nell’ambito della saldatura e lavorazione dell’acciaio inox su impianti e particolari per l’industria alimentare, enologica e petrolchimica. la Envasald Snc si occupa della produzione e commercializzazione di raccordi in acciaio inox per l’industria alimentare, dolciaria, lattiero-casearia, chimico-farmaceutica. tutti i nostri prodotti sono ricavati da tubo laminato freddo aISI304l e aISI316l.
la nostra produzione è orientata principalmente verso questi articoli:•curve 45° 90° 180° •riduzioni eccentriche e concentriche•Pezzi a tee e croci•Pezzi a Y 90° 120°•doppie curve•curve portatermometro•tee con curva •tee a 45°•Filtri di linea 90° 45°
il tutto eseguito secondo le normative dIN - SMS - ISo - claMP.
completiamo la nostra produzione realizzando lavorazioni a disegno suspecificadelcliente.
www.envasald.com
companyEnvasald Snc was born in 2003, after working for 20 years in the stainless steel welding and manufacturing. Envasald Snc produces and sells stainless steel fittings for the food industry, the dairy farming, the confectionary and pharmaceutical-chemical industry. all our products are made with cold rolled pipe in a304l and a316l.
our production is mainly focused on this items:•Bends 45° 90° 180°•concentric and eccentric reducers•tees and crosses•Y 90° 120°•double bends•Bends with thermometer holder•tee with bend•tee 45°•Filters : line 90° 45°
according to the rules dIN - SMS - ISo - claMP.
We also produce items following the costumer drawings.
6 www.envasald.com
indice prodottiIndex of products
raccordi Serie diNDINfitting
p. 7
raccordi Serie SMSSMSfitting
p. 31
raccordi Serie ClaMpCLAMPfitting
p. 55
raccordi Serie iSoISOfitting
p. 75
raccordi serie diN dIN fitt ing
7www.envasald.com
diN
Schede tecniche | data sheet
8 www.envasald.com
diN
Schede tecniche | data sheet
9www.envasald.com
diN
tubo laminato a freddocold rolled pipe
Fig.001|Pic.001
COD. DN D x Sp.
Schede tecniche | data sheet
10 www.envasald.com
diN
COD. DN D x Sp.
COD. DN D x Sp. L
Curva 90° con estremità a saldare90° welding bend
Fig.010|Pic.010
Curva 45° con estremità a saldare45° welding bend
Fig.011|Pic.011
Schede tecniche | Data sheet
11www.envasald.com
diN
180° welding bend
Fig.012|Pic.012
Curva 180° con estremità a saldare
COD. DN D x Sp. L
Schede tecniche | data sheet
12 www.envasald.com
diN
COD. DN D x Sp. L
COD. DN D x Sp. L
90° expanding bend
Fig.013|Pic.013
Curva 45° con estremità a mandrinare45° expanding bend
Fig.014|Pic.014
Curva 90° con estremità a mandrinare
Schede tecniche | Data sheet
13www.envasald.com
diN
Curva 180° con estremità a mandrinare180° expanding bend
Fig.015|Pic.015
COD. DN D x Sp. L
Schede tecniche | data sheet
14 www.envasald.com
diN
COD. DN D x Sp. L
COD. DN D x Sp. L
Expanding tee
Fig.020|Pic.020
Tee con estremità a saldareWelding tee
Fig.021|Pic.021
Tee con estremità a mandrinare
Schede tecniche | Data sheet
15www.envasald.com
diN
COD. DN D x Sp. L
COD. DN D x Sp. L
Expanding cross
Fig.022|Pic.022
Croce con estremità a saldareWelding cross
Fig.023|Pic.023
Croce con estremità a mandrinare
Schede tecniche | data sheet
16 www.envasald.com
diN
reducing expanding tee
Fig.024|Pic.024
Tee ridotto con estremità a mandrinare
COD. DxSp. d L
COD. DxSp. d L
Schede tecniche | Data sheet
17www.envasald.com
diN
reducing welding teeTee ridotto con estemità a saldare
Fig.025|Pic.025
COD. DxSp. d L
COD. DxSp. d L
Schede tecniche | data sheet
18 www.envasald.com
diN
reducing expanding crossCroce ridotta con estremità a mandrinare
Fig.026|Pic.026
COD. DxSp. d L
COD. DxSp. d L
Schede tecniche | Data sheet
19www.envasald.com
diN
reducing welding crossCroce ridotta con estremità a saldare
Fig.027|Pic.027
COD. DxSp. d L
COD. DxSp. d L
Schede tecniche | data sheet
20 www.envasald.com
diN
COD. Dxd L
concentric expanding reducer
Fig.030|Pic.030
Riduzione concentrica estremità a saldareconcentric welding reducer
Fig.031|Pic.031
Riduzione concentrica estremità a mandrinare
COD. Dxd L
Schede tecniche | Data sheet
21www.envasald.com
diN
concentric expanding reducer
Riduzione concentrica estremità a saldare
Riduzione concentrica estremità a mandrinare
COD. Dxd L
Eccentric expanding reducer
Fig.032|Pic.032
Riduzione eccentrica estremità a saldareEccentric welding reducer
Fig.033|Pic.033
Riduzione eccentrica estremità a mandrinare
COD. Dxd L
Schede tecniche | data sheet
22 www.envasald.com
diN
COD. DN D x Sp. L
COD. DN D x Sp. L
tee with bend welding end
Fig.040|Pic.040
Tee con curva con estremità a mandrinaretee with bend expanding end
Fig.041|Pic.041
Tee con curva con estremità a saldare
Schede tecniche | Data sheet
23www.envasald.com
diN
Tee con curva con estremità a mandrinare
COD. DN D x Sp. L
COD. DN D x Sp. L
double bend welding end
Fig.050|Pic.050
Doppia curva con estremità a mandrinaredouble bend expanding end
Fig.051|Pic.051
Doppia curva con estremità a saldare
Schede tecniche | data sheet
24 www.envasald.com
diN
90° bend with thermometer holderCurva 90° a mandrinare con portatermometro
COD. DN D x Sp. L H
Fig.060|Pic.060
Schede tecniche | Data sheet
25www.envasald.com
diN
COD. DN D x Sp. L
120° Y
Fig.071|Pic.071
Pezzo a Y 120°
COD. DN D x Sp. L
Pezzo a Y 90°90° Y
Fig.070|Pic.070
Schede tecniche | data sheet
26 www.envasald.com
diN
COD. DN D x d L B
COD. DN D x d L
Linefilter
Fig.080|Pic.080
Filtro a 90°90°filter
Fig.081|Pic.081
Filtro di linea
Schede tecniche | Data sheet
27www.envasald.com
diN
Filtro a 90°
Filtro a 45°45°filter
Fig.082|Pic.082
COD. DN D x d L
Schede tecniche | data sheet
28 www.envasald.com
diN
COD. DN
Cestello filtro 90°90°filtercartridge
Fig.084|Pic.084
COD. DNFig.083|Pic.083
Cestello filtro di lineaLinefiltercartridge
COD. DN
Cestello filtro 45°45°filtercartridge
Fig.085|Pic.085
Schede tecniche | Data sheet
29www.envasald.com
diN
Cestello filtro 90°
Cestello filtro 45°
COD. DN
line/90° screen
Fig.086|Pic.086
Rete con mesh filtro di linea/90°line/90° screen + mesh
Fig.087|Pic.087
Rete filtro di linea/90°
COD. DN
Schede tecniche | data sheet
30 www.envasald.com
diN
COD. DN
45° screen
Fig.088|Pic.088
Rete con mesh filtro 45°45° screen + mesh
Fig.089|Pic.089
Rete filtro 45°
COD. DN
SMS
raccordi serie SMS SMS fitt ing
31www.envasald.com
Rete con mesh filtro 45°
32 www.envasald.com
sms
schede tecniche | Data sheet
schede tecniche | Data sheet
33www.envasald.com
sms
COD. DN D x Sp.
Tubo laminato a freddoCold rolled pipe
Fig.101|Pic.101
schede tecniche | Data sheet
34 www.envasald.com
sms
COD. DN D x Sp.
COD. DN D x Sp. L
Curva 90° con estremità a saldare90° welding bend
Fig.110|Pic.110
Curva 45° con estremità a saldare45° welding bend
Fig.111|Pic.111
Schede tecniche | Data sheet
35www.envasald.com
sms
180° welding bend
Fig.112|Pic.112
Curva 180° con estremità a saldare
COD. DN D x Sp. L
schede tecniche | Data sheet
36 www.envasald.com
sms
COD. DN D x Sp. L
COD. DN D x Sp. L
90° expanding bend
Fig.113|Pic113
Curva 45° con estremità a mandrinare45° expanding bend
Fig.114|Pic.114
Curva 90° con estremità a mandrinare
Schede tecniche | Data sheet
37www.envasald.com
sms
Curva 180° con estremità a mandrinare180° expanding bend
Fig.115|Pic.115
COD. DN D x Sp. L
schede tecniche | Data sheet
38 www.envasald.com
sms
COD. DN D x Sp. L
COD. DN D x Sp. L
Expanding tee
Fig.120|Pic.120
Tee con estremità a saldareWelding tee
Fig.121|Pic.121
Tee con estremità a mandrinare
Schede tecniche | Data sheet
39www.envasald.com
sms
COD. DN D x Sp. L
COD. DN D x Sp. L
Expanding cross
Fig.122|Pic.122
Croce con estremità a saldareWelding cross
Fig.123|Pic.123
Croce con estremità a mandrinare
schede tecniche | Data sheet
40 www.envasald.com
sms
COD. DxSp. d L
Reducing expanding tee
Fig.124|Pic.124
Tee ridotto con estremità a mandrinare
Schede tecniche | Data sheet
41www.envasald.com
sms
COD. DxSp. d L
Reducing welding tee
Fig.125|Pic.125
Tee ridotto con estremità a saldare
schede tecniche | Data sheet
42 www.envasald.com
sms
COD. DxSp. d L
Reducing expanding cross
Fig.126|Pic.126
Croce ridotta con estremità a mandrinare
Schede tecniche | Data sheet
43www.envasald.com
sms
COD. DxSp. d L
Reducing welding cross
Fig.127|Pic.127
Croce ridotta con estremità a saldare
schede tecniche | Data sheet
44 www.envasald.com
sms
COD. Dxd L
Concentric expanding reducer
Fig.130|Pic.130
Riduzione concentrica estremità a saldareConcentric welding reducer
Fig.131|Pic.131
Riduzione concentrica estremità a mandrinare
COD. Dxd L
Schede tecniche | Data sheet
45www.envasald.com
sms
Concentric expanding reducer
Riduzione concentrica estremità a saldare
Riduzione concentrica estremità a mandrinare
COD. Dxd L
Eccentric expanding reducer
Fig.132|Pic.132
Riduzione eccentrica estremità a saldareEccentric welding reducer
Fig.133|Pic.133
Riduzione eccentrica estremità a mandrinare
COD. Dxd L
schede tecniche | Data sheet
46 www.envasald.com
sms
COD. DN D x Sp. L
COD. DN D x Sp. L
Tee con curva con estremità a saldareTee with bend welding end
Fig.140|Pic.140
Tee con curva con estremità a mandrinareTee with bend expanding end
Fig.141|Pic.141
Schede tecniche | Data sheet
47www.envasald.com
sms
COD. DN D x Sp. L
COD. DN D x Sp. L
Doppia curva con estremità a saldareDouble bend welding end
Fig.150|Pic.150
Doppia curva con estremità a mandrinareDouble bend expanding end
Fig.151|Pic.151
schede tecniche | Data sheet
48 www.envasald.com
sms
Curva 90° a mandrinare con portatermometro90° bend with thermometer holder
Fig.160|Pic.160
COD. DN D x Sp. L H
Schede tecniche | Data sheet
49www.envasald.com
sms
COD. DN D x Sp. L
120° Y
Fig.171|Pic.171
Pezzo a Y 120°
COD. DN D x Sp. L
Pezzo a Y 90°90° Y
Fig.170|Pic.170
schede tecniche | Data sheet
50 www.envasald.com
sms
COD. DN D x d L
Filtro di lineaLine filter
Fig.180|Pic.180
Filtro a 90°90° filter
Fig.181|Pic.181 COD. DN D x d L B
Schede tecniche | Data sheet
51www.envasald.com
sms
Filtro a 45°45° filter
Fig.182|Pic.182
COD. DN D x d L
schede tecniche | Data sheet
52 www.envasald.com
sms
COD. DNFig.183|Pic.183
Cestello filtro di lineaLine filter cartridge
COD. DN
Cestello filtro 90°90° filter cartridge
Fig.184|Pic.184
COD. DN
Cestello filtro 45°45° filter cartridge
Fig.185|Pic.185
Schede tecniche | Data sheet
53www.envasald.com
sms
COD. DN
Line/90° screen
Fig.186|Pic.186
Rete con mesh filtro di linea/90°Line/90° screen + mesh
Fig.187|Pic.187
Rete filtro in linea/90°
COD. DN
Cestello filtro 90°
Cestello filtro 45°
schede tecniche | Data sheet
54 www.envasald.com
sms
COD. DN
45° screen
Fig.188|Pic.188
Rete con mesh filtro 45°45° screen + mesh
Fig.189|Pic.189
Rete filtro 45°
COD. DN
Raccordi serie CLAMP CLAMP fitt ing
55www.envasald.com
CLA
mP
Rete con mesh filtro 45°
56 www.envasald.com
CLA
MP
Schede tecniche | Data sheet
Schede tecniche | Data sheet
57www.envasald.com
CLA
MP
COD. DN D x Sp.
Tubo laminato a freddoCold rolled pipe
Fig.201|Pic.201
Schede tecniche | Data sheet
58 www.envasald.com
CLA
MP
COD. DN D L
Tronchetto Clamp cortoShort welding Clamp ferrule
Fig.210|Pic.210
Tronchetto ClampWelding Clamp ferrule
Fig.211|Pic.211 COD. DN D L
Schede tecniche | Data sheet
59www.envasald.com
CLA
MP
COD. DN D L
Tronchetto Clamp lungoLong welding Clamp ferrule
Fig.212|Pic.212
Tronchetto Clamp con portagommaRubber hose adapter
Fig.213|Pic.213 COD. DN D L
Schede tecniche | Data sheet
60 www.envasald.com
CLA
MP
Fig.214|Pic.214
Tappo ClampEnd Cap
COD. DN D L
COD. DN
GuarnizioneGasket
Fig.215|Pic.215
Schede tecniche | Data sheet
61www.envasald.com
CLA
MP
Guarnizione
COD. DN D
Morsetto ClampClamp
Fig.216|Pic.216
Schede tecniche | Data sheet
62 www.envasald.com
CLA
MP
COD. DN D x Sp.
COD. DN D x Sp. L
Curva 90° con estremità a saldare90° welding bend
Fig.220|Pic.220
Curva 45° con estremità a saldare45° welding bend
Fig.221|Pic.221
Schede tecniche | Data sheet
63www.envasald.com
CLA
MP
180° welding bend
Fig.222|Pic.222
Curva 180° con estremità a saldare
COD. DN D x Sp. L
Schede tecniche | Data sheet
64 www.envasald.com
CLA
MP
COD. DN D x Sp.
COD. DN D x Sp. L
90° bend end Clamp ferrule
Fig.223|Pic.223
Curva 45° con estremità Clamp45° bend end Clamp ferrule
Fig.224|Pic.224
Curva 90° con estremità Clamp
Schede tecniche | Data sheet
65www.envasald.com
CLA
MP
Curva 180° con estremità Clamp180° bend end Clamp ferrule
Fig.225|Pic.225
COD. DN D x Sp. L H
Schede tecniche | Data sheet
66 www.envasald.com
CLA
MP
COD. DN D x Sp. L
Welding tee
Fig.230|Pic.230
Tee con estremità a saldare
Reducing welding tee
Fig.231|Pic.231
Tee ridotto con estremità a saldare
COD. D x Sp. d L
Schede tecniche | Data sheet
67www.envasald.com
CLA
MP
COD. DN D x Sp. H
Croce con estremità a saldareWelding cross
Fig.232|Pic.232
Reducing welding cross
Fig.233|Pic.233
Croce ridotta con estremità a saldare
COD. D x Sp. d L
Schede tecniche | Data sheet
68 www.envasald.com
CLA
MP
COD. DN D x Sp. L
Tee end Clamp ferrule
Fig.234|Pic.234
Tee con estremità Clamp
Reducing tee end Clamp ferrule
Fig.235|Pic.235
Tee ridotto con estremità Clamp
COD. D x Sp. d L
Schede tecniche | Data sheet
69www.envasald.com
CLA
MP
COD. DN D x Sp. L
Croce con estremità ClampCross end Clamp ferrule
Fig.236|Pic.236
Reducing cross end Clamp ferrule
Fig.237|Pic.237
Croce ridotta con estremità Clamp
COD. D x Sp. d L
Schede tecniche | Data sheet
70 www.envasald.com
CLA
MP
COD. Dxd L
Concentric welding reducer
Fig.240|Pic.240
Riduzione eccentrica con estremità a saldareEccentric welding reducer
Fig.241|Pic.241
Riduzione concentrica con estremità a saldare
COD. Dxd L
Schede tecniche | Data sheet
71www.envasald.com
CLA
MP
COD. Dxd L
Concentric reducer end ferrule Clamp
Fig.242|Pic.242
Riduzione eccentrica con estremità ClampEccentric reducer end ferrule Clamp
Fig.243|Pic.243
Riduzione concentrica con estremità Clamp
COD. Dxd L
Schede tecniche | Data sheet
72 www.envasald.com
CLA
MP
COD. DN D x Sp. L
120° Y
Fig.251|Pic.251
Pezzo a Y 120°
COD. DN D x Sp. L
Pezzo a Y 90°90° Y
Fig.250|Pic.250
Schede tecniche | Data sheet
73www.envasald.com
CLA
MP
Pezzo a Y 90°
COD. DN D x Sp. L
120° Y end ferrule Clamp
Fig.254|Pic.254
Pezzo a Y 120° con estremità Clamp
COD. DN D x Sp. L
Pezzo a Y 90° con estremità Clamp90° Y end ferrule Clamp
Fig.252|Pic.252
74 www.envasald.com
iSo
Raccordi serie iSo ISO fitt ing
75www.envasald.com
iSo
Schede tecniche | Data sheet
76 www.envasald.com
iSo
Schede tecniche | Data sheet
Schede tecniche | Data sheet
77www.envasald.com
iSo
COD. ISO D Sp.
TuboPipe
Fig.301|Pic.301
Schede tecniche | Data sheet
78 www.envasald.com
iSo
COD. ISO D R Sp.
Curva 90° con estremità a saldare90° bend welding end
Fig.310|Pic.310
Curva 45° con estremità a saldare45° bend welding end
Fig.311|Pic.311 COD. ISO D R Sp.
Schede tecniche | Data sheet
79www.envasald.com
iSo
180° bend welding end
Fig.312|Pic.312
Curva 180° con estremità a saldare
COD. ISO D L Sp.
Schede tecniche | Data sheet
80 www.envasald.com
iSo
Welding tee
Fig.320|Pic.320
Tee con estremità a saldare
Tee estrusoShort tee
Fig.321|Pic.321
COD. ISO D L Sp.
COD. ISO D L Sp.
Schede tecniche | Data sheet
81www.envasald.com
iSo
Welding cross
Fig.322|Pic.322
Croce estrusaShort cross
Fig.323|Pic.323
Croce con estremità a saldare
COD. ISO D L Sp.
COD. ISO D L Sp.
Schede tecniche | Data sheet
82 www.envasald.com
iSo
Reducing welding tee
Fig.324|Pic.324
Tee ridotto con estremità a saldare
COD. D d L Sp.
Schede tecniche | Data sheet
83www.envasald.com
iSo
Reducing short tee
Fig.325|Pic.325
Tee estruso ridotto
COD. D d L Sp.
Schede tecniche | Data sheet
84 www.envasald.com
iSo
Reducing cross
Fig.326|Pic.326
Croce ridotta con estremità a saldare
COD. D d L Sp.
Schede tecniche | Data sheet
85www.envasald.com
iSo
Reducing short cross
Fig.327|Pic.327
Croce estrusa ridotta
COD. D d L Sp.
Schede tecniche | Data sheet
86 www.envasald.com
iSo
Tee con curva con estremità a saldareTee with bend welding end
Fig.330|Pic.330
Double bend welding end
Fig.340|Pic.340
Doppia curva con estremità a saldare
COD. ISO D L Sp.
COD. ISO D L Sp.
Schede tecniche | Data sheet
87www.envasald.com
iSo
120° Y
Fig.361|Pic.361
Pezzo a Y 120°
Pezzo a Y 90°90° Y
Fig.360|Pic.360 COD. ISO D L Sp.
COD. ISO D L Sp.
www.envasald.com
Note | Notes
88
Note | Notes
www.envasald.com 89
www.envasald.com
Note | Notes
90
Realizzazione grafica e fotografie:comunicazione & immagine S.r.l.www.comimm.it
ENVASALD SNcdi Enrico e Valerio Mattei & C.
Via Monza, 99/11A • 20060 Gessate (MI)Tel. 02.95762008 • Fax 02.95784041info@envasald.comwww.envasald.com
ENVASALD SNcdi Enrico e Valerio Mattei & C.
Via Monza, 99/11A • 20060 Gessate (MI)Tel. 02.95762008 • Fax 02.95784041info@envasald.comwww.envasald.com
www.envasald.com
top related