communication products rf coaxial connectors, adaptors ... · 72 50 Ω ut 141, rg 402/u, rtk- fs...
Post on 25-Jul-2018
238 Views
Preview:
TRANSCRIPT
DEUTSCHLAND
RosenbergerRosenberger
RosenbergerHochfrequenztechnik GmbH & Co. KG
P.O.Box 1260D-84526 Tittmoning
Tel.: + 49 - 86 84 -18 - 0Fax: + 49 - 86 84 -18 - 499
E-Mail: info@rosenberger.deWeb: www.rosenberger.com
Certified by ISO /TS 16949 . ISO 9001 . ISO 14001
Ordering No.Info100CoaxCat/5000/11-2010
pA 155385
© 11.2010 RosenbergerProduction Thewald Kommunikation www.rosenberger.com
How to reach Rosenberger
A detailed map is available on our web site: www.rosenberger.com
Rosenberger Ordering Number CodeRosenberger Standard Plating Code
Rosenberger Connector Series Code
Communication ProductsRF Coaxial Connectors, Adaptors & Accessories
RF
Coa
xial
Con
nect
ors,
Ad
apto
rs &
Acc
esso
ries
kat1_cover_101025.indd 1kat1_cover_101025.indd 1 26.10.2010 12:50:10 Uhr26.10.2010 12:50:10 Uhr
Rosenberger Sales WorldwideRosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260D-84526 TittmoningTel: + 49 - 86 84 -18 - 0 I E-Mail: info@rosenberger.deFax: + 49 - 86 84 -18 - 499 I Web: www.rosenberger.com
Status 2010 I For an up-to-date overview of our sales network please refer to our website: www.rosenberger.comWhile the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents.
Germany
Vertriebsbüro MünchenRotwandweg 5D-82024 TaufkirchenTel: + 49 - 89 - 6 14 17 30Fax: + 49 - 89 - 6 14 09 54info@rosenberger.isar.de
Vertriebsbüro NordWI-tronikAlfred-Nobel-Straße 9D-57299 BurbachTel: + 49 - 27 36 - 44 70 06Fax: + 49 - 27 36 - 44 70 07info@wi-tronik.de
Europe
Austria, Croatia,Czech Republic, Hungary, Slovakia, SloveniaWalter KrennHochfrequenztechnik GmbHSimmeringer Hauptstraße 421A-1110 WienTel: + 43 - 1 - 7 48 71 17 - 0Fax: + 43 - 1 - 7 48 71 17 - 90E-Mail: info@krenn.at
Belgium, Luxembourg, NetherlandsRosenbergerHochfrequenztechnik GmbH & Co. KGSales Office BeneluxTel: + 49 - 86 84 - 18 - 0Fax: + 49 - 86 84 - 18 - 499E-Mail: info@rosenberger.de
DenmarkRosenberger Danmark a/sBlokken 38, Box 92DK-3460 BirkerodTel: + 45 - 45 82 12 94Fax: + 45 - 45 82 13 95E-Mail: mail@rosenberger.dk
FinlandETRA Electronics OyLampputie 2FIN-00740 HelsinkiTel: + 3 58 - 2 07 65 16 0Fax: + 3 58 - 2 07 65 23 11E-Mail: electronics@etra.fi
FranceRosenberger FranceActipark17, Rue des Frères LumièreF-67201 EckbolsheimTel: + 33 - 3 - 90 20 76 00Fax: + 33 - 3 - 90 20 76 01E-Mail: nathalie.dumontel@rosenberger.de
ItalyRosenberger Hochfrequenztechnik GmbH & Co. KGVia Broolini, 3120049 ConcorezzoTel: + 39 - 039 - 9630 306Fax: + 39 - 039 - 5968 439E-Mail: riccardo.santovito@rosenberger.de
NorwayT&G Elektro A - STerrasseveien 6P.O. Box 63N-1321 StabekkTel: + 47 - 67 - 12 90 50Fax: + 47 - 67 - 12 90 60E-Mail: epost@tgelektro.no
PolandPTH neopta electronics sp.z.o.o.Ul. Wlodkowica 14PL-60-334 PoznanTel: + 48 - 61 - 6 62 48 51Fax: + 48 - 61 - 6 62 48 52E-Mail: info@neopta.pl
RussiaTeleconta Ltd., Moscow officeRussian Federation1st Buhvostova str.12/11 OAO NPK NIIDARbld. 17, office 314RUS-107258 MoscowTel: + 7 - 495 - 7 39 07 20Fax: + 7 - 495 - 2 23 69 98Cell Phone: +7 - 916 - 6540839E-Mail: fiber@cyclons.ru
Spain, PortugalRosenberger Telecom, S.A.Berlin 4 - Of. 2E-28224 Pozuelo de AlarcónTel: + 34 - 91 - 3 52 83 52Fax: + 34 - 91 - 3 52 98 13E-Mail: rosenberger@epirsa.com
SwedenRosenberger Sverige ABBåtsmansvägen 8P.O. Box 10020S-181 10 Lidingö, StockholmTel: + 46 - 8 - 6 36 26 00Fax: + 46 - 8 - 6 36 26 26E-Mail: info@rosenberger.se
SwitzerlandEME AGInterconnection & MotionLohwisstrasse 50CH-8123 EbmatingenTel: + 41 - 44 - 982 11 11Fax: + 41 - 44 - 982 11 33E-Mail: info@eme.ch
TurkeyNorana Dis Ticaretve Mümessillik Ltd. Sti.Atatürk Caddesi 206 - 1, Derya Apt.TR-35220 Birinci Kordon, IzmirTel: + 90 - 2 32 - 4 64 00 11Fax: + 90 - 2 32 - 4 63 06 73E-Mail: info@norana.com.tr
United KingdomRosenberger Micro-Coax Ltd.2b Mercury HouseCalleva Park, AldermastonGB-Berkshire RG7 8PNTel: + 44 - 1-18 - 9 81 00 23Fax: + 44 - 1-18 - 9 81 61 80E-Mail: sales@rmcoax.com
Africa
Algeria, Morocco, TunisiaRosenberger Telecom, S.A.Berlin 4 - Of. 2E-28224 Pozuelo de AlarcónTel: + 34 - 91 - 3 52 83 52Fax: + 34 - 91 - 3 52 98 13E-Mail: rosenberger@epirsa.com
South AfricaActum ElectronicsP.O. Box 819RSA-Rivonia 2128Unit A8 TheStables Business ParkNo 13, 3rd Road Linbro Park 2064Tel: +27 - 11 - 6 08 30 01Fax: +27 - 11 - 6 08 19 18E-Mail: sales@actum.co.za
South America
ArgentinaMercotel S.R.L.Viel 2079RA-1424 Buenos AiresTel: + 54 - 11 - 49 21 46 20Fax: + 54 - 11 - 49 24 59 52E-Mail: info@mercotel.com.ar
BoliviaRIBCO Ltda.Ed. Cámara Nacional de Comercio Of.1002Av. Mariscal Santa Cruz Nº 1392BOL-La PazTel: + 591-2 -211 1100Fax: + 591-2 -233 4805E-Mail: gibatta@entelnet.bo
BrazilRosenberger Domex TelecomRua Miracema, 781Chácaras ReunidasBR-São José dos Campos - SPCEP 12238-360Tel: + 55 - 12 - 3 35 65 00Fax: + 55 - 12 - 3 33 16 31E-Mail: vendas@rdt.com.br
Chile, Latin AmericaRosenberger Sudamérica Ltda.Aldunate 1961,Santiago 836-1195Tel: + 56 - 2 - 3 67 11 70Fax: + 56 - 2 - 3 67 12 78E-Mail: rosenberger@rosenberger.cl
ColombiaLatinocomm Ltda.Diagonal 152A 34-11CO-BogotáTel: + 57 - 1 - 274 59 25Fax: + 57 - 1 - 216 13 52E-Mail: latinocomm@cable.net.co
Guatemala, Central America Grupo Ebis11 Avenida 31-35 Zona 5GCA- Guatemala, C.A 01005Tel: + 502 - 2331 - 8700Fax: + 502 - 2332 - 7999E-Mail: info@fotusaltd.com
PeruLB ForsbergIslas Virgenes 148Urb. La Portada de La Planicie, La MolinaPE-Lima 12Tel: + 51 - 1 - 9977 5982Fax: + 51 - 1 - 368 1989E-Mail: forsberg1@terra.com.pe
VenezuelaTotal StockCentro Profesional La Urbina - P.B.Local A - Calle 3-AUrbanizacion La UrbinaYV-CaracasTel: + 58 - 212 - 241 6993Fax: + 58 - 212 - 242 3894E-Mail: totalstock@movistar.net.ve
North America
USA, CanadaRosenberger of North America, LLC.Greenfield Corporate CenterP.O. Box 10113USA-Lancaster, PA 17605-0113Tel: + 1 - 717 - 290 8000Fax: + 1 - 717 - 399 9885E-Mail: info@rosenbergerna.com
Asia
China, Asia, AustraliaRosenberger Asia Pacific Electronic Co., Ltd.No. 3, Anxiang Road, Block BTianzhu Airport Industrial ZoneBeijing 101300PR ChinaTel: + 86 - 10 - 80 48 19 95Fax: + 86 - 10 - 80 48 24 38E-Mail: info@rosenberger.com.cn
IndiaRosenberger Electronic Co. (India) PvtLimitedPlot No. 263, Sector 6IMT Manesar, GurgaonHaryana-122050Tel: + 91 - 124 - 477 55 00Fax: + 91 - 124 - 477 55 01E-Mail: info@rosenberger.in
IsraelM.T.I. Engineering Ltd.Afek Industrial Park11 Hamelacha St.IL-48091 Rosh Ha’ayinTel: + 9 72 - 3 - 9 00 89 00Fax: + 9 72 - 3 - 9 00 89 02E-Mail: info@mti-group.co.il
JapanFusoh Shoji Co., Ltd.No. 10 - 2, 2-ChomeNagata-Cho, Chiyoda-KuJ-Tokyo 100-0014Tel: + 81 - 3 - 35 81 90 56Fax: + 81 - 3 - 35 81 57 09E-Mail: inq@fusoh.co.jp
United Arabian Emirates, Gulf RegionAlliance Fiwa TradingFrij Murar, Near Naif RoadP.O.Box 1621416214 DubaiTel: + 971- 42 - 732 565Fax: + 971- 42 - 732 565E-Mail: info@alliancefiwa.com
Code Plating Symbol Layer thickness Magnetic Properties
A Nickel Ni 3.00 μm
B Silver Ag 3.00 μm Non magnetic
E Gold Au 0.80 μm
F Gold Au 0.10 μm
H Gold selective Au 1.27 μm
L AuroDur® Au 0.15 μm Non magnetic
N White bronze* Non magnetic
S Stainless Steel
T Tin/Lead Sn 6.00- 8.00 μm Non magnetic
19 S 1 01- 4 0M L5Plating Code
01-Z9 Cable Group (see last page)
00 Adaptors, Direct Mount
0M Surface Mount Device
0P Press-fit Version
0 Clamp Version, Accessories
1 Crimp Version
2 Solder Version, Solder Pot
3 Solder Crimp Version
4 Solder Pin, PCB Mounting
5 Solid Center Contact, Coax Transition
6 Stripline
7 Microstrip
8 Crimp Version - Pigtail
K Adaptors female (2nd end)
S Adaptors male (2nd end)
Successive Number
1 Straight Connector
2 Right Angle Connector
3 T-or Y-Adapter
4 Panel Connector with 4-hole Flange
5 Panel Connector with Round Flange
6 Panel Connector with Hexagonal Flange
7 Panel Connector with 2-hole Flange
K Female Connector, Jack
R Reverse Polarity Connector
S Male Connector, Plug
P Sexless
W Tool
Z Accessories
Connector Series Code (overview see next page)
CableGroup
Impedance CableType
01 50 Ω RG 178, RG 196
02 50 Ω RG 316/U, RG 174 A/U, RG 188, G 022 32
02 75 Ω RG 179, RG 187, L910/22
03 50 Ω RG 316/U-d, K 02252 D, 5YCC6Y 0.54/1.5
03 75 Ω RG 179- d, L 910/19
06 50 Ω RG 58, RG 141
07 50 Ω RG 142, RG 223, RG 400
08 50 Ω RG 142, RG 223, RG 400
09 75 Ω RG 59, G 04233- 2, URM 104, Video 0.6/3.7
10 93 Ω RG 62
11 93 Ω RG 71
12 75 Ω RG 212, RG 222
13 75 Ω Belden 9248, 2YCY 0.80/4.8
14 75 Ω RG 6
15 50 Ω RG 213
16 50 Ω RG 225, RG 393
17 50 Ω RG 214
18 75 Ω RG 11
20 75 Ω RG 216/U
21 50 Ω RG 217
22 50 Ω RG 218
26 75 Ω Video 1.0- 6.6
28 75 Ω BT 2003, G 04233
29 75 Ω G 03233d, 2 S PTT 6012
40 75 Ω RG 180, RG 195, 2YCY 0.4/2.5
41 75 Ω 2YCCY 0.4/2.5; 2YC(ms)CY 0.4/2.5
42 75 Ω x2YCY 0.7/4.4
43 75 Ω 2YCCY 0.7/4.4
44 75 Ω 2YCCY 1.0/6.5
50 75 Ω BT 2001
70 50 Ω UT 47
71 50 Ω UT 85, RG 405/U, RTK- FS 085, RTK- Flex 405
72 50 Ω UT 141, RG 402/U, RTK- FS 141, RTK- Flex 402
73 50 Ω UT 250, RG 401/U, RTK- FS 250
C01 50 Ω Flexible Corrugated Cable 1/4“R
C02 50 Ω Super Flexible Corrugated Cable 3/8“S
C03 50 Ω Flexible Corrugated Cable 1/2“R
C05 50 Ω Flexible Corrugated Cable 7/8“R
C06 50 Ω Flexible Corrugated Cable 1 1/4“R
C07 50 Ω Flexible Corrugated Cable 1 5/8“R
C08 50 Ω Super Flexible Corrugated Cable 1/2“S
C09 50 Ω Super Flexible Corrugated Cable 1/4“S
C15 50 Ω Super Flexible Corrugated Cable 7/8“S
E3 50 Ω RTK 008
H1 50 Ω RTK 013
K9 50 Ω RTK 048, RTK 049
M4 50 Ω RTK 031, RTK 032
N8 50 Ω LMR 200
N9 50 Ω LMR 400, TZC 50032
P7 75 Ω Flex 3
S3 75 Ω R1- T 2.0 LIXI 75K
S4 75 Ω ST 212
T6 75 Ω Tella TM 13
T7 75 Ω Flex 5/75
U1 50 Ω RTK 106, RTK 107
U5 50 Ω RTK 092
U7 50 Ω RTK 161, RTK 161- P, RTK 162, RTK 162- P
U8 50 Ω RTK 125
V2 75 Ω 735 A, 02Y(St)CY 0.45/2.0
V4 75 Ω 02XSC(ms)C6Y0.45/2.0; 02Y12Y(ms)C6X0.45/2.0
V6 75 Ω BT 3002, TZC 75024, TZC 75025
W7 50 Ω UT 70, UT 70 LL, AA 50070
W9 50 Ω UT 118
X1 50 Ω RG 178 B/U-d
Y4 50 Ω RTK 043, HF50 1.4/3.7 C
Y8 50 Ω RTK 057, TZC 50025
Code Plating Symbol Layer thickness Magnetic Properties
1 Silver Ag 3.00 μm Non magnetic
3 Gold Au 1.27 μm
4 Gold Au 0.80 μm
5 AuroDur® Au 0.15 μm Non magnetic
Code
01 RPC-1.00 (W) - 110 GHz
02 RPC-2.92 (K) - 40 GHz
03 RPC-3.50 - 26.5 GHz
04 RPC-SL 26.5 - 26.5 GHz
05 RPC-N - 18 GHz
06 RPC-TNC - 18 GHz
07 RPC-7 - 18 GHz
08 RPC-1.85 (V) - 65 GHz
09 RPC-2.40 - 50 GHz
10 RPC-SP (BMA) - 22 GHz
P4 RPC-SL 40 - 40 GHz
P5 RPC-N 75 Ω - 4 GHz
Code
11 Tools
15 Micro-RF
16 FMC
17 Longwipe-SMP
18 Mini-SMP
19 SMP
20 MMCX
23 Inserts Mini-Coax
24 Mini-UHF
25 Inserts High Voltage DIN 41626
26 FME
27 IEC Antenna 75 Ω
28 QMA
29 MCX
30 SSMA
31 Microdot
32 SMA
32R SMA reverse
34 1.0-2.3 DIN 47297 50 Ω
35 SSMB
38 SSMC
39 SMC
40 MCX 75 Ω
41 MHV (High Voltage BNC)
42 HV 4-10 (High Voltage C)
43 HN (High Voltage N)
45 Inserts 1.0-2.3 DIN 41626 50 Ω
47 SSMG
49 SMG
Code
50 Inserts High Power DIN 41626 / D-Sub
51 BNC 50 Ω
51R BNC reverse
52 C 50 Ω
53 N 50 Ω
53Q SnapN
54 UHF
55 Inserts D-Sub
56 TNC 50 Ω
56R TNC Reverse
57 SHV (Safe High Voltage)
59 SMB 50 Ω
60 7-16
65 4.1-9.5
71 BNC 75 Ω
72 C 75 Ω
73 N 75 Ω
74 F
75 Inserts 1.0-2.3 DIN 41626 75 Ω (intermateable with 50 Ω)
76 TNC 75 Ω
78 1.6-5.6 II Generation
81 Twinax
88 1.6-5.6 III Generation
99 Specials
119 P-SMP
153Q QN
734 1.0-2.3 DIN 47297 75 Ω
745 Inserts 0.8-2.7 DIN 41626 75 Ω
759 SMB 75 Ω acc. to BT 43
Oberflächenschlüssel
Die verwendeten Oberflächen bei Innen- und Außenleiter
der Rosenberger-Steckverbinder sind durch die beiden
letzten Stellen der jeweiligen Artikel- Bestellnummer
definiert.
Beispiel: 19 S 101 - 40M L5
Oberfläche Außenleiter: AuroDur® (L) Au 0.15 μ
Oberfläche Innenleiter: AuroDur® (5) Au 0.15 μ
Plating Code
The used platings of outer and center contacts of Rosen-
berger connectors can be identified by each part number.
Example: 19 S 101 - 40M L5
Plating outer contact: AuroDur® (L) Au 0.15 μ
Plating center contact: AuroDur® (5) Au 0.15 μ
Outer Contact / Außenleiter
Center Contact / Innenleiter
*White bronze (e.g.Optalloy®) Flash white bronze over silver (e.g. Optargen®)
Precision Connector Series
Classical Coaxial Connector Series
Rosenberger Ordering Number Code
Nummernschlüssel
Rosenberger Standard Plating Code
Standard-Oberflächenschlüssel
Rosenberger Connector Series Code
Seriencode Steckverbinder
The overview contains our standard cable types and cable groups. Please note that Rosenberger offers connectors for other cable types.
In der Übersicht sind unsere Standard-Kabeltypen und Kabelgruppen aufgeführt. Bitte beachten Sie, dass Rosenberger Steckverbinder für weitere Kabel anbietet.
Rosenberger Cable GroupsRosenberger Ordering Number Code
Rosenberger Sales WorldwideRosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260D-84526 TittmoningTel: + 49 - 86 84 -18 - 0 I E-Mail: info@rosenberger.deFax: + 49 - 86 84 -18 - 499 I Web: www.rosenberger.com
Status 2010 I For an up-to-date overview of our sales network please refer to our website: www.rosenberger.comWhile the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents.
Germany
Vertriebsbüro MünchenRotwandweg 5D-82024 TaufkirchenTel: + 49 - 89 - 6 14 17 30Fax: + 49 - 89 - 6 14 09 54info@rosenberger.isar.de
Vertriebsbüro NordWI-tronikAlfred-Nobel-Straße 9D-57299 BurbachTel: + 49 - 27 36 - 44 70 06Fax: + 49 - 27 36 - 44 70 07info@wi-tronik.de
Europe
Austria, Croatia,Czech Republic, Hungary, Slovakia, SloveniaWalter KrennHochfrequenztechnik GmbHSimmeringer Hauptstraße 421A-1110 WienTel: + 43 - 1 - 7 48 71 17 - 0Fax: + 43 - 1 - 7 48 71 17 - 90E-Mail: info@krenn.at
Belgium, Luxembourg, NetherlandsRosenbergerHochfrequenztechnik GmbH & Co. KGSales Office BeneluxTel: + 49 - 86 84 - 18 - 0Fax: + 49 - 86 84 - 18 - 499E-Mail: info@rosenberger.de
DenmarkRosenberger Danmark a/sBlokken 38, Box 92DK-3460 BirkerodTel: + 45 - 45 82 12 94Fax: + 45 - 45 82 13 95E-Mail: mail@rosenberger.dk
FinlandETRA Electronics OyLampputie 2FIN-00740 HelsinkiTel: + 3 58 - 2 07 65 16 0Fax: + 3 58 - 2 07 65 23 11E-Mail: electronics@etra.fi
FranceRosenberger FranceActipark17, Rue des Frères LumièreF-67201 EckbolsheimTel: + 33 - 3 - 90 20 76 00Fax: + 33 - 3 - 90 20 76 01E-Mail: nathalie.dumontel@rosenberger.de
ItalyRosenberger Hochfrequenztechnik GmbH & Co. KGVia Broolini, 3120049 ConcorezzoTel: + 39 - 039 - 9630 306Fax: + 39 - 039 - 5968 439E-Mail: riccardo.santovito@rosenberger.de
NorwayT&G Elektro A - STerrasseveien 6P.O. Box 63N-1321 StabekkTel: + 47 - 67 - 12 90 50Fax: + 47 - 67 - 12 90 60E-Mail: epost@tgelektro.no
PolandPTH neopta electronics sp.z.o.o.Ul. Wlodkowica 14PL-60-334 PoznanTel: + 48 - 61 - 6 62 48 51Fax: + 48 - 61 - 6 62 48 52E-Mail: info@neopta.pl
RussiaTeleconta Ltd., Moscow officeRussian Federation1st Buhvostova str.12/11 OAO NPK NIIDARbld. 17, office 314RUS-107258 MoscowTel: + 7 - 495 - 7 39 07 20Fax: + 7 - 495 - 2 23 69 98Cell Phone: +7 - 916 - 6540839E-Mail: fiber@cyclons.ru
Spain, PortugalRosenberger Telecom, S.A.Berlin 4 - Of. 2E-28224 Pozuelo de AlarcónTel: + 34 - 91 - 3 52 83 52Fax: + 34 - 91 - 3 52 98 13E-Mail: rosenberger@epirsa.com
SwedenRosenberger Sverige ABBåtsmansvägen 8P.O. Box 10020S-181 10 Lidingö, StockholmTel: + 46 - 8 - 6 36 26 00Fax: + 46 - 8 - 6 36 26 26E-Mail: info@rosenberger.se
SwitzerlandEME AGInterconnection & MotionLohwisstrasse 50CH-8123 EbmatingenTel: + 41 - 44 - 982 11 11Fax: + 41 - 44 - 982 11 33E-Mail: info@eme.ch
TurkeyNorana Dis Ticaretve Mümessillik Ltd. Sti.Atatürk Caddesi 206 - 1, Derya Apt.TR-35220 Birinci Kordon, IzmirTel: + 90 - 2 32 - 4 64 00 11Fax: + 90 - 2 32 - 4 63 06 73E-Mail: info@norana.com.tr
United KingdomRosenberger Micro-Coax Ltd.2b Mercury HouseCalleva Park, AldermastonGB-Berkshire RG7 8PNTel: + 44 - 1-18 - 9 81 00 23Fax: + 44 - 1-18 - 9 81 61 80E-Mail: sales@rmcoax.com
Africa
Algeria, Morocco, TunisiaRosenberger Telecom, S.A.Berlin 4 - Of. 2E-28224 Pozuelo de AlarcónTel: + 34 - 91 - 3 52 83 52Fax: + 34 - 91 - 3 52 98 13E-Mail: rosenberger@epirsa.com
South AfricaActum ElectronicsP.O. Box 819RSA-Rivonia 2128Unit A8 TheStables Business ParkNo 13, 3rd Road Linbro Park 2064Tel: +27 - 11 - 6 08 30 01Fax: +27 - 11 - 6 08 19 18E-Mail: sales@actum.co.za
South America
ArgentinaMercotel S.R.L.Viel 2079RA-1424 Buenos AiresTel: + 54 - 11 - 49 21 46 20Fax: + 54 - 11 - 49 24 59 52E-Mail: info@mercotel.com.ar
BoliviaRIBCO Ltda.Ed. Cámara Nacional de Comercio Of.1002Av. Mariscal Santa Cruz Nº 1392BOL-La PazTel: + 591-2 -211 1100Fax: + 591-2 -233 4805E-Mail: gibatta@entelnet.bo
BrazilRosenberger Domex TelecomRua Miracema, 781Chácaras ReunidasBR-São José dos Campos - SPCEP 12238-360Tel: + 55 - 12 - 3 35 65 00Fax: + 55 - 12 - 3 33 16 31E-Mail: vendas@rdt.com.br
Chile, Latin AmericaRosenberger Sudamérica Ltda.Aldunate 1961,Santiago 836-1195Tel: + 56 - 2 - 3 67 11 70Fax: + 56 - 2 - 3 67 12 78E-Mail: rosenberger@rosenberger.cl
ColombiaLatinocomm Ltda.Diagonal 152A 34-11CO-BogotáTel: + 57 - 1 - 274 59 25Fax: + 57 - 1 - 216 13 52E-Mail: latinocomm@cable.net.co
Guatemala, Central America Grupo Ebis11 Avenida 31-35 Zona 5GCA- Guatemala, C.A 01005Tel: + 502 - 2331 - 8700Fax: + 502 - 2332 - 7999E-Mail: info@fotusaltd.com
PeruLB ForsbergIslas Virgenes 148Urb. La Portada de La Planicie, La MolinaPE-Lima 12Tel: + 51 - 1 - 9977 5982Fax: + 51 - 1 - 368 1989E-Mail: forsberg1@terra.com.pe
VenezuelaTotal StockCentro Profesional La Urbina - P.B.Local A - Calle 3-AUrbanizacion La UrbinaYV-CaracasTel: + 58 - 212 - 241 6993Fax: + 58 - 212 - 242 3894E-Mail: totalstock@movistar.net.ve
North America
USA, CanadaRosenberger of North America, LLC.Greenfield Corporate CenterP.O. Box 10113USA-Lancaster, PA 17605-0113Tel: + 1 - 717 - 290 8000Fax: + 1 - 717 - 399 9885E-Mail: info@rosenbergerna.com
Asia
China, Asia, AustraliaRosenberger Asia Pacific Electronic Co., Ltd.No. 3, Anxiang Road, Block BTianzhu Airport Industrial ZoneBeijing 101300PR ChinaTel: + 86 - 10 - 80 48 19 95Fax: + 86 - 10 - 80 48 24 38E-Mail: info@rosenberger.com.cn
IndiaRosenberger Electronic Co. (India) PvtLimitedPlot No. 263, Sector 6IMT Manesar, GurgaonHaryana-122050Tel: + 91 - 124 - 477 55 00Fax: + 91 - 124 - 477 55 01E-Mail: info@rosenberger.in
IsraelM.T.I. Engineering Ltd.Afek Industrial Park11 Hamelacha St.IL-48091 Rosh Ha’ayinTel: + 9 72 - 3 - 9 00 89 00Fax: + 9 72 - 3 - 9 00 89 02E-Mail: info@mti-group.co.il
JapanFusoh Shoji Co., Ltd.No. 10 - 2, 2-ChomeNagata-Cho, Chiyoda-KuJ-Tokyo 100-0014Tel: + 81 - 3 - 35 81 90 56Fax: + 81 - 3 - 35 81 57 09E-Mail: inq@fusoh.co.jp
United Arabian Emirates, Gulf RegionAlliance Fiwa TradingFrij Murar, Near Naif RoadP.O.Box 1621416214 DubaiTel: + 971- 42 - 732 565Fax: + 971- 42 - 732 565E-Mail: info@alliancefiwa.com
Code Plating Symbol Layer thickness Magnetic Properties
A Nickel Ni 3.00 μm
B Silver Ag 3.00 μm Non magnetic
E Gold Au 0.80 μm
F Gold Au 0.10 μm
H Gold selective Au 1.27 μm
L AuroDur® Au 0.15 μm Non magnetic
N White bronze* Non magnetic
S Stainless Steel
T Tin/Lead Sn 6.00- 8.00 μm Non magnetic
19 S 1 01- 4 0M L5Plating Code
01-Z9 Cable Group (see last page)
00 Adaptors, Direct Mount
0M Surface Mount Device
0P Press-fit Version
0 Clamp Version, Accessories
1 Crimp Version
2 Solder Version, Solder Pot
3 Solder Crimp Version
4 Solder Pin, PCB Mounting
5 Solid Center Contact, Coax Transition
6 Stripline
7 Microstrip
8 Crimp Version - Pigtail
K Adaptors female (2nd end)
S Adaptors male (2nd end)
Successive Number
1 Straight Connector
2 Right Angle Connector
3 T-or Y-Adapter
4 Panel Connector with 4-hole Flange
5 Panel Connector with Round Flange
6 Panel Connector with Hexagonal Flange
7 Panel Connector with 2-hole Flange
K Female Connector, Jack
R Reverse Polarity Connector
S Male Connector, Plug
P Sexless
W Tool
Z Accessories
Connector Series Code (overview see next page)
CableGroup
Impedance CableType
01 50 Ω RG 178, RG 196
02 50 Ω RG 316/U, RG 174 A/U, RG 188, G 022 32
02 75 Ω RG 179, RG 187, L910/22
03 50 Ω RG 316/U-d, K 02252 D, 5YCC6Y 0.54/1.5
03 75 Ω RG 179- d, L 910/19
06 50 Ω RG 58, RG 141
07 50 Ω RG 142, RG 223, RG 400
08 50 Ω RG 142, RG 223, RG 400
09 75 Ω RG 59, G 04233- 2, URM 104, Video 0.6/3.7
10 93 Ω RG 62
11 93 Ω RG 71
12 75 Ω RG 212, RG 222
13 75 Ω Belden 9248, 2YCY 0.80/4.8
14 75 Ω RG 6
15 50 Ω RG 213
16 50 Ω RG 225, RG 393
17 50 Ω RG 214
18 75 Ω RG 11
20 75 Ω RG 216/U
21 50 Ω RG 217
22 50 Ω RG 218
26 75 Ω Video 1.0- 6.6
28 75 Ω BT 2003, G 04233
29 75 Ω G 03233d, 2 S PTT 6012
40 75 Ω RG 180, RG 195, 2YCY 0.4/2.5
41 75 Ω 2YCCY 0.4/2.5; 2YC(ms)CY 0.4/2.5
42 75 Ω x2YCY 0.7/4.4
43 75 Ω 2YCCY 0.7/4.4
44 75 Ω 2YCCY 1.0/6.5
50 75 Ω BT 2001
70 50 Ω UT 47
71 50 Ω UT 85, RG 405/U, RTK- FS 085, RTK- Flex 405
72 50 Ω UT 141, RG 402/U, RTK- FS 141, RTK- Flex 402
73 50 Ω UT 250, RG 401/U, RTK- FS 250
C01 50 Ω Flexible Corrugated Cable 1/4“R
C02 50 Ω Super Flexible Corrugated Cable 3/8“S
C03 50 Ω Flexible Corrugated Cable 1/2“R
C05 50 Ω Flexible Corrugated Cable 7/8“R
C06 50 Ω Flexible Corrugated Cable 1 1/4“R
C07 50 Ω Flexible Corrugated Cable 1 5/8“R
C08 50 Ω Super Flexible Corrugated Cable 1/2“S
C09 50 Ω Super Flexible Corrugated Cable 1/4“S
C15 50 Ω Super Flexible Corrugated Cable 7/8“S
E3 50 Ω RTK 008
H1 50 Ω RTK 013
K9 50 Ω RTK 048, RTK 049
M4 50 Ω RTK 031, RTK 032
N8 50 Ω LMR 200
N9 50 Ω LMR 400, TZC 50032
P7 75 Ω Flex 3
S3 75 Ω R1- T 2.0 LIXI 75K
S4 75 Ω ST 212
T6 75 Ω Tella TM 13
T7 75 Ω Flex 5/75
U1 50 Ω RTK 106, RTK 107
U5 50 Ω RTK 092
U7 50 Ω RTK 161, RTK 161- P, RTK 162, RTK 162- P
U8 50 Ω RTK 125
V2 75 Ω 735 A, 02Y(St)CY 0.45/2.0
V4 75 Ω 02XSC(ms)C6Y0.45/2.0; 02Y12Y(ms)C6X0.45/2.0
V6 75 Ω BT 3002, TZC 75024, TZC 75025
W7 50 Ω UT 70, UT 70 LL, AA 50070
W9 50 Ω UT 118
X1 50 Ω RG 178 B/U-d
Y4 50 Ω RTK 043, HF50 1.4/3.7 C
Y8 50 Ω RTK 057, TZC 50025
Code Plating Symbol Layer thickness Magnetic Properties
1 Silver Ag 3.00 μm Non magnetic
2 Gold Au 1.27 μm
3 Gold Au 0.80 μm
4 AuroDur® Au 0.15 μm Non magnetic
Code
01 RPC-1.00 (W) - 110 GHz
02 RPC-2.92 (K) - 40 GHz
03 RPC-3.50 - 26.5 GHz
04 RPC-SL 26.5 - 26.5 GHz
05 RPC-N - 18 GHz
06 RPC-TNC - 18 GHz
07 RPC-7 - 18 GHz
08 RPC-1.85 (V) - 65 GHz
09 RPC-2.40 - 50 GHz
10 RPC-SP (BMA) - 22 GHz
P4 RPC-SL 40 - 40 GHz
P5 RPC-N 75 Ω - 4 GHz
Code
11 Tools
15 Micro-RF
16 FMC
17 Longwipe-SMP
18 Mini-SMP
19 SMP
20 MMCX
23 Inserts Mini-Coax
24 Mini-UHF
25 Inserts High Voltage DIN 41626
26 FME
27 IEC Antenna 75 Ω
28 QMA
29 MCX
30 SSMA
31 Microdot
32 SMA
32R SMA reverse
34 1.0-2.3 DIN 47297 50 Ω
35 SSMB
38 SSMC
39 SMC
40 MCX 75 Ω
41 MHV (High Voltage BNC)
42 HV 4-10 (High Voltage C)
43 HN (High Voltage N)
45 Inserts 1.0-2.3 DIN 41626 50 Ω
47 SSMG
49 SMG
Code
50 Inserts High Power DIN 41626 / D-Sub
51 BNC 50 Ω
51R BNC reverse
52 C 50 Ω
53 N 50 Ω
53Q SnapN
54 UHF
55 Inserts D-Sub
56 TNC 50 Ω
56R TNC Reverse
57 SHV (Safe High Voltage)
59 SMB 50 Ω
60 7-16
65 4.1-9.5
71 BNC 75 Ω
72 C 75 Ω
73 N 75 Ω
74 F
75 Inserts 1.0-2.3 DIN 41626 75 Ω (intermateable with 50 Ω)
76 TNC 75 Ω
78 1.6-5.6 II Generation
81 Twinax
88 1.6-5.6 III Generation
99 Specials
119 P-SMP
153Q QN
734 1.0-2.3 DIN 47297 75 Ω
745 Inserts 0.8-2.7 DIN 41626 75 Ω
759 SMB 75 Ω acc. to BT 43
Oberflächenschlüssel
Die verwendeten Oberflächen bei Innen- und Außenleiter
der Rosenberger-Steckverbinder sind durch die beiden
letzten Stellen der jeweiligen Artikel- Bestellnummer
definiert.
Beispiel: 19 S 101 - 40M L5
Oberfläche Außenleiter: AuroDur® (L) Au 0.15 μ
Oberfläche Innenleiter: AuroDur® (5) Au 0.15 μ
Plating Code
The used platings of outer and center contacts of Rosen-
berger connectors can be identified by each part number.
Example: 19 S 101 - 40M L5
Plating outer contact: AuroDur® (L) Au 0.15 μ
Plating center contact: AuroDur® (5) Au 0.15 μ
Outer Contact / Außenleiter
Center Contact / Innenleiter
*White bronze (e.g.Optalloy®) Flash white bronze over silver (e.g. Optargen®)
Precision Connector Series
Classical Coaxial Connector Series
Rosenberger Ordering Number Code
Nummernschlüssel
Rosenberger Standard Plating Code
Standard-Oberflächenschlüssel
Rosenberger Connector Series Code
Seriencode Steckverbinder
The overview contains our standard cable types and cable groups. Please note that Rosenberger offers connectors for other cable types.
In der Übersicht sind unsere Standard-Kabeltypen und Kabelgruppen aufgeführt. Bitte beachten Sie, dass Rosenberger Steckverbinder für weitere Kabel anbietet.
Rosenberger Cable GroupsRosenberger Ordering Number Code
Rosenberger Sales WorldwideRosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260D-84526 TittmoningTel: + 49 - 86 84 -18 - 0 I E-Mail: info@rosenberger.deFax: + 49 - 86 84 -18 - 499 I Web: www.rosenberger.com
Status 2010 I For an up-to-date overview of our sales network please refer to our website: www.rosenberger.comWhile the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents.
Germany
Vertriebsbüro MünchenRotwandweg 5D-82024 TaufkirchenTel: + 49 - 89 - 6 14 17 30Fax: + 49 - 89 - 6 14 09 54info@rosenberger.isar.de
Vertriebsbüro NordWI-tronikAlfred-Nobel-Straße 9D-57299 BurbachTel: + 49 - 27 36 - 44 70 06Fax: + 49 - 27 36 - 44 70 07info@wi-tronik.de
Europe
Austria, Croatia,Czech Republic, Hungary, Slovakia, SloveniaWalter KrennHochfrequenztechnik GmbHSimmeringer Hauptstraße 421A-1110 WienTel: + 43 - 1 - 7 48 71 17 - 0Fax: + 43 - 1 - 7 48 71 17 - 90E-Mail: info@krenn.at
Belgium, Luxembourg, NetherlandsRosenbergerHochfrequenztechnik GmbH & Co. KGSales Office BeneluxTel: + 49 - 86 84 - 18 - 0Fax: + 49 - 86 84 - 18 - 499E-Mail: info@rosenberger.de
DenmarkRosenberger Danmark a/sBlokken 38, Box 92DK-3460 BirkerodTel: + 45 - 45 82 12 94Fax: + 45 - 45 82 13 95E-Mail: mail@rosenberger.dk
FinlandETRA Electronics OyLampputie 2FIN-00740 HelsinkiTel: + 3 58 - 2 07 65 16 0Fax: + 3 58 - 2 07 65 23 11E-Mail: electronics@etra.fi
FranceRosenberger FranceActipark17, Rue des Frères LumièreF-67201 EckbolsheimTel: + 33 - 3 - 90 20 76 00Fax: + 33 - 3 - 90 20 76 01E-Mail: nathalie.dumontel@rosenberger.de
ItalyRosenberger Hochfrequenztechnik GmbH & Co. KGVia Broolini, 3120049 ConcorezzoTel: + 39 - 039 - 9630 306Fax: + 39 - 039 - 5968 439E-Mail: riccardo.santovito@rosenberger.de
NorwayT&G Elektro A - STerrasseveien 6P.O. Box 63N-1321 StabekkTel: + 47 - 67 - 12 90 50Fax: + 47 - 67 - 12 90 60E-Mail: epost@tgelektro.no
PolandPTH neopta electronics sp.z.o.o.Ul. Wlodkowica 14PL-60-334 PoznanTel: + 48 - 61 - 6 62 48 51Fax: + 48 - 61 - 6 62 48 52E-Mail: info@neopta.pl
RussiaTeleconta Ltd., Moscow officeRussian Federation1st Buhvostova str.12/11 OAO NPK NIIDARbld. 17, office 314RUS-107258 MoscowTel: + 7 - 495 - 7 39 07 20Fax: + 7 - 495 - 2 23 69 98Cell Phone: +7 - 916 - 6540839E-Mail: fiber@cyclons.ru
Spain, PortugalRosenberger Telecom, S.A.Berlin 4 - Of. 2E-28224 Pozuelo de AlarcónTel: + 34 - 91 - 3 52 83 52Fax: + 34 - 91 - 3 52 98 13E-Mail: rosenberger@epirsa.com
SwedenRosenberger Sverige ABBåtsmansvägen 8P.O. Box 10020S-181 10 Lidingö, StockholmTel: + 46 - 8 - 6 36 26 00Fax: + 46 - 8 - 6 36 26 26E-Mail: info@rosenberger.se
SwitzerlandEME AGInterconnection & MotionLohwisstrasse 50CH-8123 EbmatingenTel: + 41 - 44 - 982 11 11Fax: + 41 - 44 - 982 11 33E-Mail: info@eme.ch
TurkeyNorana Dis Ticaretve Mümessillik Ltd. Sti.Atatürk Caddesi 206 - 1, Derya Apt.TR-35220 Birinci Kordon, IzmirTel: + 90 - 2 32 - 4 64 00 11Fax: + 90 - 2 32 - 4 63 06 73E-Mail: info@norana.com.tr
United KingdomRosenberger Micro-Coax Ltd.2b Mercury HouseCalleva Park, AldermastonGB-Berkshire RG7 8PNTel: + 44 - 1-18 - 9 81 00 23Fax: + 44 - 1-18 - 9 81 61 80E-Mail: sales@rmcoax.com
Africa
Algeria, Morocco, TunisiaRosenberger Telecom, S.A.Berlin 4 - Of. 2E-28224 Pozuelo de AlarcónTel: + 34 - 91 - 3 52 83 52Fax: + 34 - 91 - 3 52 98 13E-Mail: rosenberger@epirsa.com
South AfricaActum ElectronicsP.O. Box 819RSA-Rivonia 2128Unit A8 TheStables Business ParkNo 13, 3rd Road Linbro Park 2064Tel: +27 - 11 - 6 08 30 01Fax: +27 - 11 - 6 08 19 18E-Mail: sales@actum.co.za
South America
ArgentinaMercotel S.R.L.Viel 2079RA-1424 Buenos AiresTel: + 54 - 11 - 49 21 46 20Fax: + 54 - 11 - 49 24 59 52E-Mail: info@mercotel.com.ar
BoliviaRIBCO Ltda.Ed. Cámara Nacional de Comercio Of.1002Av. Mariscal Santa Cruz Nº 1392BOL-La PazTel: + 591-2 -211 1100Fax: + 591-2 -233 4805E-Mail: gibatta@entelnet.bo
BrazilRosenberger Domex TelecomRua Miracema, 781Chácaras ReunidasBR-São José dos Campos - SPCEP 12238-360Tel: + 55 - 12 - 3 35 65 00Fax: + 55 - 12 - 3 33 16 31E-Mail: vendas@rdt.com.br
Chile, Latin AmericaRosenberger Sudamérica Ltda.Aldunate 1961,Santiago 836-1195Tel: + 56 - 2 - 3 67 11 70Fax: + 56 - 2 - 3 67 12 78E-Mail: rosenberger@rosenberger.cl
ColombiaLatinocomm Ltda.Diagonal 152A 34-11CO-BogotáTel: + 57 - 1 - 274 59 25Fax: + 57 - 1 - 216 13 52E-Mail: latinocomm@cable.net.co
Guatemala, Central America Grupo Ebis11 Avenida 31-35 Zona 5GCA- Guatemala, C.A 01005Tel: + 502 - 2331 - 8700Fax: + 502 - 2332 - 7999E-Mail: info@fotusaltd.com
PeruLB ForsbergIslas Virgenes 148Urb. La Portada de La Planicie, La MolinaPE-Lima 12Tel: + 51 - 1 - 9977 5982Fax: + 51 - 1 - 368 1989E-Mail: forsberg1@terra.com.pe
VenezuelaTotal StockCentro Profesional La Urbina - P.B.Local A - Calle 3-AUrbanizacion La UrbinaYV-CaracasTel: + 58 - 212 - 241 6993Fax: + 58 - 212 - 242 3894E-Mail: totalstock@movistar.net.ve
North America
USA, CanadaRosenberger of North America, LLC.Greenfield Corporate CenterP.O. Box 10113USA-Lancaster, PA 17605-0113Tel: + 1 - 717 - 290 8000Fax: + 1 - 717 - 399 9885E-Mail: info@rosenbergerna.com
Asia
China, Asia, AustraliaRosenberger Asia Pacific Electronic Co., Ltd.No. 3, Anxiang Road, Block BTianzhu Airport Industrial ZoneBeijing 101300PR ChinaTel: + 86 - 10 - 80 48 19 95Fax: + 86 - 10 - 80 48 24 38E-Mail: info@rosenberger.com.cn
IndiaRosenberger Electronic Co. (India) PvtLimitedPlot No. 263, Sector 6IMT Manesar, GurgaonHaryana-122050Tel: + 91 - 124 - 477 55 00Fax: + 91 - 124 - 477 55 01E-Mail: info@rosenberger.in
IsraelM.T.I. Engineering Ltd.Afek Industrial Park11 Hamelacha St.IL-48091 Rosh Ha’ayinTel: + 9 72 - 3 - 9 00 89 00Fax: + 9 72 - 3 - 9 00 89 02E-Mail: info@mti-group.co.il
JapanFusoh Shoji Co., Ltd.No. 10 - 2, 2-ChomeNagata-Cho, Chiyoda-KuJ-Tokyo 100-0014Tel: + 81 - 3 - 35 81 90 56Fax: + 81 - 3 - 35 81 57 09E-Mail: inq@fusoh.co.jp
United Arabian Emirates, Gulf RegionAlliance Fiwa TradingFrij Murar, Near Naif RoadP.O.Box 1621416214 DubaiTel: + 971- 42 - 732 565Fax: + 971- 42 - 732 565E-Mail: info@alliancefiwa.com
Code Plating Symbol Layer thickness Magnetic Properties
A Nickel Ni 3.00 μm
B Silver Ag 3.00 μm Non magnetic
E Gold Au 0.80 μm
F Gold Au 0.10 μm
H Gold selective Au 1.27 μm
L AuroDur® Au 0.15 μm Non magnetic
N White bronze* Non magnetic
S Stainless Steel
T Tin/Lead Sn 6.00- 8.00 μm Non magnetic
19 S 1 01- 4 0M L5Plating Code
01-Z9 Cable Group (see last page)
00 Adaptors, Direct Mount
0M Surface Mount Device
0P Press-fit Version
0 Clamp Version, Accessories
1 Crimp Version
2 Solder Version, Solder Pot
3 Solder Crimp Version
4 Solder Pin, PCB Mounting
5 Solid Center Contact, Coax Transition
6 Stripline
7 Microstrip
8 Crimp Version - Pigtail
K Adaptors female (2nd end)
S Adaptors male (2nd end)
Successive Number
1 Straight Connector
2 Right Angle Connector
3 T-or Y-Adapter
4 Panel Connector with 4-hole Flange
5 Panel Connector with Round Flange
6 Panel Connector with Hexagonal Flange
7 Panel Connector with 2-hole Flange
K Female Connector, Jack
R Reverse Polarity Connector
S Male Connector, Plug
P Sexless
W Tool
Z Accessories
Connector Series Code (overview see next page)
CableGroup
Impedance CableType
01 50 Ω RG 178, RG 196
02 50 Ω RG 316/U, RG 174 A/U, RG 188, G 022 32
02 75 Ω RG 179, RG 187, L910/22
03 50 Ω RG 316/U-d, K 02252 D, 5YCC6Y 0.54/1.5
03 75 Ω RG 179- d, L 910/19
06 50 Ω RG 58, RG 141
07 50 Ω RG 142, RG 223, RG 400
08 50 Ω RG 142, RG 223, RG 400
09 75 Ω RG 59, G 04233- 2, URM 104, Video 0.6/3.7
10 93 Ω RG 62
11 93 Ω RG 71
12 75 Ω RG 212, RG 222
13 75 Ω Belden 9248, 2YCY 0.80/4.8
14 75 Ω RG 6
15 50 Ω RG 213
16 50 Ω RG 225, RG 393
17 50 Ω RG 214
18 75 Ω RG 11
20 75 Ω RG 216/U
21 50 Ω RG 217
22 50 Ω RG 218
26 75 Ω Video 1.0- 6.6
28 75 Ω BT 2003, G 04233
29 75 Ω G 03233d, 2 S PTT 6012
40 75 Ω RG 180, RG 195, 2YCY 0.4/2.5
41 75 Ω 2YCCY 0.4/2.5; 2YC(ms)CY 0.4/2.5
42 75 Ω x2YCY 0.7/4.4
43 75 Ω 2YCCY 0.7/4.4
44 75 Ω 2YCCY 1.0/6.5
50 75 Ω BT 2001
70 50 Ω UT 47
71 50 Ω UT 85, RG 405/U, RTK- FS 085, RTK- Flex 405
72 50 Ω UT 141, RG 402/U, RTK- FS 141, RTK- Flex 402
73 50 Ω UT 250, RG 401/U, RTK- FS 250
C01 50 Ω Flexible Corrugated Cable 1/4“R
C02 50 Ω Super Flexible Corrugated Cable 3/8“S
C03 50 Ω Flexible Corrugated Cable 1/2“R
C05 50 Ω Flexible Corrugated Cable 7/8“R
C06 50 Ω Flexible Corrugated Cable 1 1/4“R
C07 50 Ω Flexible Corrugated Cable 1 5/8“R
C08 50 Ω Super Flexible Corrugated Cable 1/2“S
C09 50 Ω Super Flexible Corrugated Cable 1/4“S
C15 50 Ω Super Flexible Corrugated Cable 7/8“S
E3 50 Ω RTK 008
H1 50 Ω RTK 013
K9 50 Ω RTK 048, RTK 049
M4 50 Ω RTK 031, RTK 032
N8 50 Ω LMR 200
N9 50 Ω LMR 400, TZC 50032
P7 75 Ω Flex 3
S3 75 Ω R1- T 2.0 LIXI 75K
S4 75 Ω ST 212
T6 75 Ω Tella TM 13
T7 75 Ω Flex 5/75
U1 50 Ω RTK 106, RTK 107
U5 50 Ω RTK 092
U7 50 Ω RTK 161, RTK 161- P, RTK 162, RTK 162- P
U8 50 Ω RTK 125
V2 75 Ω 735 A, 02Y(St)CY 0.45/2.0
V4 75 Ω 02XSC(ms)C6Y0.45/2.0; 02Y12Y(ms)C6X0.45/2.0
V6 75 Ω BT 3002, TZC 75024, TZC 75025
W7 50 Ω UT 70, UT 70 LL, AA 50070
W9 50 Ω UT 118
X1 50 Ω RG 178 B/U-d
Y4 50 Ω RTK 043, HF50 1.4/3.7 C
Y8 50 Ω RTK 057, TZC 50025
Code Plating Symbol Layer thickness Magnetic Properties
1 Silver Ag 3.00 μm Non magnetic
2 Gold Au 1.27 μm
3 Gold Au 0.80 μm
4 AuroDur® Au 0.15 μm Non magnetic
Code
01 RPC-1.00 (W) - 110 GHz
02 RPC-2.92 (K) - 40 GHz
03 RPC-3.50 - 26.5 GHz
04 RPC-SL 26.5 - 26.5 GHz
05 RPC-N - 18 GHz
06 RPC-TNC - 18 GHz
07 RPC-7 - 18 GHz
08 RPC-1.85 (V) - 65 GHz
09 RPC-2.40 - 50 GHz
10 RPC-SP (BMA) - 22 GHz
P4 RPC-SL 40 - 40 GHz
P5 RPC-N 75 Ω - 4 GHz
Code
11 Tools
15 Micro-RF
16 FMC
17 Longwipe-SMP
18 Mini-SMP
19 SMP
20 MMCX
23 Inserts Mini-Coax
24 Mini-UHF
25 Inserts High Voltage DIN 41626
26 FME
27 IEC Antenna 75 Ω
28 QMA
29 MCX
30 SSMA
31 Microdot
32 SMA
32R SMA reverse
34 1.0-2.3 DIN 47297 50 Ω
35 SSMB
38 SSMC
39 SMC
40 MCX 75 Ω
41 MHV (High Voltage BNC)
42 HV 4-10 (High Voltage C)
43 HN (High Voltage N)
45 Inserts 1.0-2.3 DIN 41626 50 Ω
47 SSMG
49 SMG
Code
50 Inserts High Power DIN 41626 / D-Sub
51 BNC 50 Ω
51R BNC reverse
52 C 50 Ω
53 N 50 Ω
53Q SnapN
54 UHF
55 Inserts D-Sub
56 TNC 50 Ω
56R TNC Reverse
57 SHV (Safe High Voltage)
59 SMB 50 Ω
60 7-16
65 4.1-9.5
71 BNC 75 Ω
72 C 75 Ω
73 N 75 Ω
74 F
75 Inserts 1.0-2.3 DIN 41626 75 Ω (intermateable with 50 Ω)
76 TNC 75 Ω
78 1.6-5.6 II Generation
81 Twinax
88 1.6-5.6 III Generation
99 Specials
119 P-SMP
153Q QN
734 1.0-2.3 DIN 47297 75 Ω
745 Inserts 0.8-2.7 DIN 41626 75 Ω
759 SMB 75 Ω acc. to BT 43
Oberflächenschlüssel
Die verwendeten Oberflächen bei Innen- und Außenleiter
der Rosenberger-Steckverbinder sind durch die beiden
letzten Stellen der jeweiligen Artikel- Bestellnummer
definiert.
Beispiel: 19 S 101 - 40M L5
Oberfläche Außenleiter: AuroDur® (L) Au 0.15 μ
Oberfläche Innenleiter: AuroDur® (5) Au 0.15 μ
Plating Code
The used platings of outer and center contacts of Rosen-
berger connectors can be identified by each part number.
Example: 19 S 101 - 40M L5
Plating outer contact: AuroDur® (L) Au 0.15 μ
Plating center contact: AuroDur® (5) Au 0.15 μ
Outer Contact / Außenleiter
Center Contact / Innenleiter
*White bronze (e.g.Optalloy®) Flash white bronze over silver (e.g. Optargen®)
Precision Connector Series
Classical Coaxial Connector Series
Rosenberger Ordering Number Code
Nummernschlüssel
Rosenberger Standard Plating Code
Standard-Oberflächenschlüssel
Rosenberger Connector Series Code
Seriencode Steckverbinder
The overview contains our standard cable types and cable groups. Please note that Rosenberger offers connectors for other cable types.
In der Übersicht sind unsere Standard-Kabeltypen und Kabelgruppen aufgeführt. Bitte beachten Sie, dass Rosenberger Steckverbinder für weitere Kabel anbietet.
Rosenberger Cable GroupsRosenberger Ordering Number Code
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com4
Introduction
1Introduction
Attention! Achtung!
The drawings of articles in catalog are not full scaled. Die Abbildungen der Artikel im Katalog sind nicht maßstäblich.
Definition of Plug and Jack Definition Stecker/Kuppler
The Rosenberger plug/male and jack/female designations are defined by the connec-tor's inner contact design.This definition may derivate from other manufacturers' definitions.
Rosenberger definiert die Stecker/male - Kuppler/female-Bezeichnung nach derForm des Innenleiters. Diese Definition kann von der Definition anderer Hersteller abweichen.
Rosenberger Online Rosenberger im Internet
Please visit also our website www.rosenberger.com, where you can find up to dateproduct news and information.
Bitte besuchen Sie auch unsere Website www.rosenberger.com, auf der wir Produkt-neuheiten und Ergänzungen im Produktspektrum zeitnah veröffentlichen.
5Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Introduction
Bas
ics
Preface
About Rosenberger
Company Profile Unternehmensprofil
Rosenberger – an Outstanding Story of Success Rosenberger - eine Erfolgsgeschichte
From its humble beginnings in the year 1958 in a locksmith shop Rosenberger hasdeveloped into a worldwide operating company with an international reputation. The unique business sense and entrepreneurship of Hans (d.2007) and Katharina(d.2004) Rosenberger and, in ensuing years, the vision, management style and lead-ership of their three sons Hans, Bernhard and Peter lead Rosenberger to today’sprominence.
Aus bescheidenen Anfängen im Jahre 1958 in einer kleinen Schlosserwerkstatt hatsich Rosenberger zu einem Unternehmen von Weltrang entwickelt. Aufbauend aufder einmaligen unternehmerischen Leistung von Hans (+ 2007) und Katharina Rosen-berger (+ 2004), haben die Söhne Hans, Bernhard und Peter das Unternehmendurch Engagement, Umsicht und Weitblick zur heutigen Größe geführt.
For many years, the name Rosenberger has stood for future-innovative high fre-quency technology. Today, Rosenberger is one of the worldwide leading manufactur-ers of standard and customer-specific connectivity solutions in high frequency andfiber optic technology.
Seit vielen Jahren werden mit dem Namen Rosenberger zukunftsweisende Hochfre-quenz-Technologien verbunden. Heute ist Rosenberger ein weltweit führender Anbie-ter von standardisierten und kundenspezifischen Verbindungslösungen inHochfrequenz- und Fiberoptik-Technologie.
Products and Markets Produkte und Märkte
The product range covers RF coaxial connectors, RF test & measurement products,RF automotive connectors as well as fiber optic products and cable assemblies. TheMobilecom Infrastructure Products business unit offers cable system solutions forradio base stations – from the antenna down to the base station. Renowned compa-nies in high-tech industries, e.g. telecommunication, data systems, medical electron-ics, test & measurement, aerospace engineering or automotive electronics trust theprecision and quality of Rosenberger products.
Das Produktspektrum umfasst HF-Koaxialsteckverbinder, HF-Messtechnik-Produkte,HF-Steckverbinder für die Automobil-Elektronik sowie Fiberoptik-Produkte und Kabel-Konfektionierung. Im Bereich Mobilfunk-Infrastruktur bietet Rosenberger Systemlö-sungen zur Komplettverkabelung von Mobilfunkstationen - von der Antenne bis zurBasisstation. Namhafte HighTech-Unternehmen in Mobil- und Telekommunikation,Datentechnik, Medizinelektronik, industrieller Messtechnik, Luft- und Raumfahrt oderder Automobil-Elektronik setzen auf Präzision und Qualität unserer Produkte.
Rosenberger’s custom machining center, the primary roots of the company, pro-duces as a components system supplier (metal) components for the transmission,automotive and construction machine industries.
Im Geschäftsbereich Maschinenbau, der Keimzelle des Unternehmens, bearbeitetRosenberger als Komponenten-Systemlieferant Metallrohteile für Getriebe-, Nutzfahr-zeug- und Baumaschinenhersteller.
The Rosenberger Group Die Rosenberger-Gruppe
The headquarters of Rosenberger is located in Fridolfing/Tittmoning (Oberbayern,Germany) where today approx. 800 people are employed. Worldwide, the Rosen-berger group operates 14 manufacturing and assembly locations as well as theRosenberger sales network in Europe, Asia and North and South America where – intotal – more than 3000 employees develop, produce and sell our products.
In unserem Stammwerk in Fridolfing/Tittmoning sind heute rund 800 Mitarbeiterbeschäftigt. In der Rosenberger-Gruppe sorgen mehr als 3000 Mitarbeiter in unse-rem Stammwerk, an 14 Fertigungs- und Montage-Standorten sowie den Rosenber-ger-Vertriebsniederlassungen in Europa, Asien sowie Nord- und Südamerika fürEntwicklung, Herstellung und Verkauf unserer Produkte.
50 years of Rosenberger - The Rosenberger family, our current and retired employ-ees as well as those business partners who have contributed to this success, lookback with justified pride as to what has been achieved and look forward to meetingthe challenges of the future.
50 Jahre Rosenberger - für die Familie Rosenberger, die aktiven wie ehemaligen Mit-arbeiter und die Geschäftspartner des Hauses ist dies auch Anlass, auf das Erreichtemit berechtigtem Stolz zurückzublicken und die Herausforderungen der Zukunft ziel-strebig anzugehen.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com6
Introduction
Quality and Environment
Superior Quality Ausgezeichnete Qualität
The quality of our products and services is an essential part of our corporate strategy.Rosenberger’s quality philosophy is not just to optimize components and products,but to continuously improve and optimize all processes to ensure customer satisfac-tion: from product development, planning, purchasing, production, sales, logisticsand service to environmental policy - all in all, to offer maximum benefit to our cus-tomers all over the world.
Die hohe Qualität unserer Produkte und Serviceleistungen ist ein grundlegenderBestandteil unserer Unternehmensstrategie. Die Rosenberger-Qualitätsphilosophiebeinhaltet nicht nur die Optimierung aller einzelnen Produkte, sondern auch die konti-nuierliche und abteilungsübergreifende Verbesserung und Optimierung aller Unter-nehmensprozesse: von der Produktentwicklung über Planung, Einkauf, Produktion,Vertrieb, Logistik bis hin zur Umweltpolitik - mit dem Ziel, allen unseren Kunden welt-weit größtmögliche Kundenzufriedenheit zu bieten.
Furthermore, our quality responsibility includes being proactive in protecting our envi-ronment and natural resources. We endeavour to avoid or minimize environmentalpollution - even beyond the requirements of legal regulations whenever possible.
Darüber hinaus umfasst unsere Verantwortung für Qualität auch stets umweltbe-wusstes Handeln und Schutz der natürlichen Ressourcen. Unser Ziel ist es, eine Ver-schmutzung der Umwelt zu vermeiden, beziehungsweise auf ein Minimum zubeschränken - möglichst deutlich unterhalb der gesetzlich erlaubten Grenzwerte.
Rosenberger is certified according to ISO/TS 16949, ISO 9001 and ISO 14001.
Rosenberger ist zertifiziert nach ISO/TS 16949 und ISO 9001. Viele weitere Zertifikate, z.B. das Umwelt-Zertifikat ISO 14001, zeugen von konse-quent angewandtem Qualitätsmanagement.
European Environmental Directives EU-Umweltschutzrichtlinien
Connectors and cable assemblies manufactured by Rosenberger correspond to thefollowing European Directives:– 2002/95/EG – Restriction of the Use of Certain Hazardous Substances in Electri-
cal and Electronic Equipment (RoHS)– 2002/96/EG – Waste Electrical and Electronic Equipment (WEEE)– 2003/11/EG and 2000/53/EC – End of Life Vehicle (ELV)– IEC 61760-1 - max. soldering temperature +260°C for 10 sec. for PCB connec-
tors
The objective of the above mentioned European Directives is to avoid or to limit theuse of the following hazardous substances:– Lead – Mercury – Cadmium – Chrome VI – PBB (Polybrominated Biphenyls) – PBDE (Polybrominated Diphenyl Ethers)
Die von Rosenberger gelieferten Steckverbinder und Kabel-Assemblies sind mit fol-genden EU-Richtlinien konform: – 2002/95/EG – Restriction of the Use of Certain Hazardous Substances in Electri-
cal and Electronic Equipment (RoHS) – 2002/96/EG – Waste Electrical and Electronic Equipment (WEEE) – 2003/11/EG und 2000/53/EC – End of Life Vehicle (ELV)– IEC 61760-1 - max. soldering temperature +260°C for 10 sec. for PCB connec-
tors
In den aufgeführten EU-Richtlinien ist die Vermeidung bzw. die Einhaltung der gesetz-lichen Grenzwerte bei Einsatz folgender Stoffe geregelt:– Blei – Quecksilber – Cadmium – Chrom VI – PBB (Polybromierte Biphenyle) – PBDE (Polybromierte Diphenylether)
7Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Introduction
Bas
ics
Preface
AuroDur® - the New Standard Plating for Gold Surfaces
AuroDur® - neue Standardoberfläche für Goldbeschichtungen
AuroDur® plating is the new standard gold surface for all Rosenberger connectorseries.AuroDur® has been developed by the engineering and metallurgical team at Rosen-berger, well-experienced in developing electroplating standard and customized sur-faces.
Die in unserem Hause entwickelte Oberfläche AuroDur® wird zukünftig als Standard-beschichtung für Goldoberflächen für alle Rosenberger-Steckverbinderserien verwen-det.
The AuroDur® surface consists of a thin gold layer on an non-magnetc, chemicallydeposited layer of nickel:– 2-3 µm Ni, 0.15 µm Au
AuroDur® gold plating fully satisfies the high mechanical and electrical demands ofradio frequency connectors. In contrast to conventional platings, essential character-istics are improved.
Properties:– high abrasion and corrosion resistance– excellent intermodulation– low contact resistance– very good solderability– optimal distribution of layer thickness– RoHS conform
AuroDur® besteht aus einer dünnen Goldschicht auf einer nicht-magnetischen, che-misch aufgebrachten Nickelschicht– 2-3 µm Ni, 0.15 µm Au
und weist hervorragende und im Vergleich zu herkömmlichen Goldbeschichtungendurchwegs bessere Eigenschaften auf.
Eigenschaften:– sehr hohe Abrieb- und Korrosionsbeständigkeit– hervorragende Intermodulationswerte– niedriger Kontaktwiderstand– sehr gute Löteigenschaften– optimale Schichtdickenverteilung– RoHS-konform
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com8
Introduction
Packing
Belting and Packing Gurtung und Verpackung
A lot of Rosenberger PCB connectors are supplied in rolled packaging (tape & reel)for automatic component placement. Different types of blister tapes are available.The dimensions of tape & reel packaging can be provided on request from yourRosenberger partner. Please refer to specific VG-number (column packing, productsection).Belting and packaging correspond to IEC 60286-3/EIA-481.
Viele Leiterplatten-Steckverbinder von Rosenberger werden für automatische Bestü-ckung in Rollenverpackungen (Tape & Reel) ausgeliefert. Als Verpackung werden ver-schiedene Blistergurt-Typen verwendet.Die genauen Abmessungen der jeweiligen Tape & Reel-Verpackungen erhalten Sieunter Angabe der VG-Nummer (Spalte Packing im Produktteil) von Ihrem Ansprech-partner.Gurtung und Verpackung entsprechen IEC 60286-3/EIA-481.
Tape & Reel Packing Rollenverpackung
Legend Text Legendentext
ø 33
0 ø 12
.75+
0.15
a 4) 3)
2)
1)
230 min.
a = Gurtbreite/ Width of Tape
1) Blister tape, without connectors2) Blister tape, with connectors3) Blister tape, without connectors4) Barcode: number of connectors, connector types, date, lot number
1) Leeres Gurtstück2) Gurtstück mit Steckverbindern3) Leeres Gurtstück4) Barcode: Anzahl Steckverbinder, Artikel-Nummer, Datum, Los-Nummer
9Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Introduction
Bas
ics
Preface
PCB Connectors PCB-Steckverbinder
For board-to-board and board-to-cable solutions Rosenberger provides a widerange of RF coaxial connectors. Solder versions and also surface-mount connectorsare available in innovative coaxial series such as SMP, Longwipe-SMP, P-SMP, Mini-SMP, FMC, Micro-RF or multiport connectors, but also in standard series SMA,QMA, SMB, Mini-Coax or MCX.
Für Board-to-Board-Steckverbindungen und für Übergänge von Leiterplatte aufKabel bietet Rosenberger ein umfangreiches Spektrum an Koaxial-PCB-Steckverbin-dern - in innovativen Serien wie SMP, Longwipe-SMP, P-SMP, Mini-SMP, FMC,Micro-HF oder Multiport-Steckverbindern, aber auch in klassischen Steckverbinder-Serien wie SMA, QMA, SMB, Mini-Coax oder MCX.
PCB connectors from Rosenberger combine many additional advantages:– Very small sizes– Minimum board-to-board distances– Radial and axial misalignment using bullets– Excellent transmission quality due to surface mount technology
Vorteile von PCB-Steckverbindern von Rosenberger:– Sehr kleine Abmessungen– minimale Leiterplattenabstände– radialer und axialer Toleranzausgleich bei Verwendung von Bullets– ausgezeichnete Übertragungsqualität
Locating Devices Festhaltevarianten
Type/Typ Locating device/Application | Festhaltevariante/Anwendung
Smooth bore Sliding contact Plug- in technology, back plane applications Gleitender KontaktEinschubtechnik-, Back- Plane- Anwendungen
Catchers mitt Sliding contact with expanded guide- in range Plug- in technology, back plane applications Gleitender Kontakt mit größerem Fangbereich bei langen Board- to- Board- VerbindungenEinschubtechnik-, Back- Plane- Anwendungen
Limited detent Semi- fixed detent Applications with low to medium mechanical loads: telecommunications and test and measurement applications Mittelfeste VerrastungAnwendungen mit geringer bis mittlerer mechanischer Beanspruchung: Telekom- und Messtechnik- Anwendungen
Full detent Vibration- resistant, fixed detent For high mechanical loads, e. g. applications in aeronautical and aerospace enineering Vibrationsstabil, feste VerrastungFür hohe mechanische Beanspruchungen, z. B. für Anwendungen in Luft- und Raumfahrt
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com10
Introduction
Preface
MisalignmentBoard-to-Board Connections
Toleranzausgleich beiLeiterplattenverbindungen
PCB-to-PCB high frequency coaxial connections clearly demonstrate the advantagesof Rosenberger Board-to-Board connectors:
HF-gerechte Verbindungen von Leiterplatte zu Leiterplatte sind ein Anwendungsfeld,wo die Vorzüge von Rosenberger Board-to-Board Steckverbindern hervorragend zurGeltung kommen:
For example, plugs with a limited detent design are used on one board assembledwith an adaptor, the so-called bullet. On the other PCB, an smooth bore type is used.This arrangement enables the necessary mechanical tolerance equalization while, atthe same time, guaranteeing excellent electrical data. Rosenberger adaptors (bullets)are available in different lengths to accomodate any board spacing from 9 mm. Thisconnection technique can be used to connnect PCBs that are vertically stacked aswell as parallel to each other.
Beispielsweise wird auf der einen Seite ein Leiterplattenstecker in Limited Detent-Ausführung eingesetzt und mit einem Adapter, dem sogenannten Bullet, verbunden.Auf der anderen Seite wird ein Smooth Bore-Typ montiert. Diese Anordnung ermög-licht den nötigen mechanischen Toleranzausgleich und gewährleistet gleichzeitig aus-gezeichnete elektrische Eigenschaften. Rosenberger-Adapter (Bullets) sind inverschiedenen Längen lieferbar, wodurch beliebige Leiterplattenabstände ab 9 mmmöglich sind. Mit dieser Verbindungstechnik können sowohl senkrecht aufeinanderstehende als auch parallel angeordnete Leiterplatten kontaktiert werden.
A wide range of plug connectors in Surface Mount Technology (SMT) facilitate therapid and economical design of your modules. Moreover, Surface Mount Technologyleads to a transmission quality that would not be possible in traditional "panel piercingtechnology".
Eine Vielzahl von Steckverbindern in Surface Mount Technology (SMT) ermöglichtschnelles und kostengünstiges Design Ihrer Baugruppen. Die Surface Mount Tech-nology führt zudem zu einer Übertragungsqualität, die in traditioneller "Durchsteck-technik" nicht denkbar ist.
Axial Misalignment Axialer Toleranzausgleich
Nom
inal
boa
rdto
boa
rd d
ista
nce
Bul
let
leng
th
Axial misalignment is possible by using a smooth bore plug on one side of the PCBconnection. The smooth bore interface enables continuous sliding in the axial direc-tion without contact loss.
Der axiale Toleranzausgleich ist möglich bei Verwendung eines Smooth-Bore-Ste-ckers auf der einen Seite der Leiterplattenverbindung. Das Smooth-Bore-Interfaceermöglicht stufenloses Gleiten in axialer Richtung ohne Kontaktverlust.
The axial tolerance is limited by the maximum "gliding surface". The smooth boreinterface complies with the MIL standard and enables a maximum axial misalignmentof 0.7 mm. In simultaneous radial misalignment, the maximum axial misalignmentdecreases by 0.1 mm to 0.6 mm.
Die axiale Toleranz ist begrenzt durch die maximale "Gleit-Fläche". Das Smooth-Bore-Interface entspricht MIL-Standard und ermöglicht maximalen axialen Toleranz-ausgleich von 0,7 mm. Bei gleichzeitigem radialem Toleranzausgleich verringert sichder maximale axiale Toleranzausgleich um 0,1 mm auf 0,6 mm.
For misalignment in PCB connectors, we offer an extensive product range of suitablestandard bullets.
Für den Toleranzausgleich in Leiterplattenverbindungen bieten wir serienmäßig einumfangreiches Produktspektrum an geeigneten Bullets.
11Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Introduction
Bas
ics
Radial Misalignment Radialer Toleranzausgleich
The board-to-board plug and bullet are designed so that when mated, the bulletfloats allowing for a radial misalignment. The maximum radial tolerance in board toboard applications depend on the distance between the boards (the length of theconnecting bullet). This tolerance can be computed using the following formula:
Das Interface Design der Board-to-Board-Stecker ermöglicht durch den Einsatz vonAdaptern (Bullets) einen radialen Toleranzausgleich, ohne die elektrischen Kontakteder Leiterplattenverbindung vorher verbindlich festzulegen. Die maximale radiale Tole-ranz in der Leiterplattenverbindung ist abhängig von der Länge des verwendetenAdapters und kann mit einer einfachen Formel berechnet werden:
X = l • sin α
X = maximum radial toleranceα = maximum angle 4°l = long adaptor (bullet)
X = l • sin α
X = maximale radiale Toleranzα = maximaler Winkel 4°l = Länge Adapter (Bullet)
Radial misalignment (X)
Axi
al m
isal
ignm
ent
bul
let
leng
th (I
)
boa
rd t
o b
oard
dis
tanc
e
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com12
Introduction
Cables and Cable Assemblies
Cables and Cable Assemblies Kabel- und Kabelkonfektionierung
For RF coaxial connectors as well as for test & measurement connectors, Rosen-berger offers a comprehensive spectrum of high-quality coaxial cables. Additionally,many Rosenberger locations around the world operate cable assembly lines to pro-duce locally complete RF solutions including cable assemblies: from low-cost cablesfor mass production, low-priced laboratory test cables, very robust cables for out-door applications up to high-precision test & measurement cables.
Für HF-Koaxial- und -Präzisions-Steckverbinder bietet Rosenberger ein umfangrei-ches Angebot an erstklassigen Koaxial-Kabeln. Darüberhinaus verfügen viele Rosen-berger-Standorte über eigene Montagelinien, um vor Ort schnell und flexibel HF-Komplettlösungen mit Kabelkonfektionierung anbieten zu können: von Low-Cost-Kabeln für Massenanwendungen, witterungsbeständigen Kabeln für Außenanwen-dungen, preisgünstigen Laborkabeln oder Präzisionsmessleitungen für Messtechnik-Anwendungen.
– Flexible cables, e.g. RG cables or RTK cables (Rosenberger customized cables)
– UTIFLEX® microwave cables– Semi-flexible cables– Semi-rigid cables– Corrugated cables– Customer specific cables
– Flexible Kabel, z.B. RG-Kabel oder RTK-Kabel (kundenspezifische Rosenberger-Kabel)
– UTIFLEX®-Mikrowellen-Kabel– Semi-flexible Kabel– Semi-rigid-Kabel– Wellmantel-Kabel– Kundenspezifische Entwicklungen
13Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Basics
Bas
ics
1. Cable termination
A coaxial connector can be mounted on a coaxial cable in different manners, which inturn significantly determine the physical design of the connector.
Common cable termination methods are:– Screw-clamp termination– Full-crimp termination– Solder-crimp termination– Soldered termination (for semi-rigid cables).
a) Screw-clamp termination (clamp)The center pin of the connector is soldered to the central conductor of the strippedand trimmed coaxial cable. The cable braid screen is clamped to the inside of theconnector body by means of a threaded conical clamping nut. A rubber gasketsecures the cable jacket.Advantages: This method of termination is robust, offers a certain degree of moistureprotection and permits reuse of the terminator components. The connector can beassembled in the field using simple open-jawed spanners and does not require spe-cial tools.
b) Full-crimp termination (crimp)The tube-like center pin of the connector is pushed onto the central conductor of thestripped and trimmed coaxial cable. The tube section is then deformed using a spe-cially designed crimping tool in such a manner as to create a gas-tight joint betweenthe two parts. The prepared cable is finally inserted into the connector body. Thecable braid extends over the crimp ferrule in the connector body and is joined bydeforming the cylindrical crimping sleeve.Advantages: Low cost termination method with consistent quality, ideally suited forlarge quantities. The clamping force is so high that the cable breaks before the crimpconnection cedes. Disadvantages: the connector components cannot be reused andspecial tools are required.
c) Solder-crimp termination (solder-crimp)This method is similar to that described in method b), with the exception that the cen-tral conductors of both the cable and the connector are soldered together.
d) Soldered termination (solder)This method is usually employed for the preparation of semi-rigid cables and can beperformed in two ways:The center pin and body of the connector are soldered respectively to the center andouter conductors of the semi-rigid cable, or the central conductor of the preparedsemi-rigid cable is also utilized as the center pin of the connector and only the bodyof the connector is soldered to the outer conductor of the semi-rigid cable. Thismethod is restricted to the SMA connector series. During assembly, special attentionmust be paid to the maximum permissible temperature of the dielectric material.
2. Cable retention force
The design of the cable terminal fixture is such that the retention force is in excess ofthat needed for the individual cable. Relevant standards (i. e. CECC 22 000) specifythese retention requirements.Under normal circumstances, the cable termination is designed to ensure that it willnot fail before cable breakage occurs.
3. Center pin retention
The center pin of the coaxial connector can be mounted in two ways:
Non-captivated pin– After soldering or crimping the center pin to the cable center conductor, it is
inserted into the connectors dielectric support. This method avoids sudden vari-ations in the diameter of the center pin and therefore offers extremely low reflec-tion values.
Captivated pin– The center pin features a shoulder and is held axially between two dielectric sup-
ports within the connector body. In order to minimize effects on reflection, the increase in diameter is electrically compensated. This method offers precise mechanical positioning even under conditions of extreme mechanical and/or thermal stress.
4. Through-hole PCB connectors
The Rosenberger product range includes numerous PCB-mounted coaxial connec-tors. The selection obviously concentrates on those connector series whose physicalsize and mass are suited to such applications.
The available connector types include both plugs (male) and jacks (female) in straightand angled versions, with various footprint dimensions and numbers of contact pins.The electrical connection to the PCB is performed by one of the following techniques:soldering, press-fit or surface-mount-technology.
Press-fit technology is an electrically and mechanically sound solderless connectionmethod. Elastically compliant contact pins of varying shapes are pressed into themetallized PCB holes. The dimensioning of the press-in area is such that the contactarea between the compliant zone of the contact pins and the metallized PCB holewalls transforms into a gas-tight and reliable high quality electrical connection. Ther-mal stress on PCB and components as well as contamination, both present in thewave soldering process are avoided here. Repair and exchange of components isstraightforward. These and other reasons recommend press-fit technology for low-cost mass production.
5. Surface-mount PCB connectors
Connectors are frequently being applied to fast digital and planar circuits in theRF area using printed circuit boards which do not require through-plating of theboard.These Surface Mount Devices (SMD) permit fast and reliable data transmission onlow-priced circuit boards, since the interconnection routes between the individualcomponents are extremely short.Surface Mount Coaxial Connectors were developed to satisfy the requirements ofSMD technology. They are low-priced miniature connectors which permit a highpacking density and satisfy stringent electrical requirements up to 20 GHz.They provide interfaces from a PCB to other PCBs, antennas, modems, outputamplifiers and many other devices.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com14
Basics
6. Glossary
AttenuationThe reduction of the amplitude of a signal after passing through a high-loss two portnetwork. A section of a transmission line can be considered to be such a network. Ona coaxial line, the sum of the following loss elements causes the attenuation of thetransmitted electromagnetic wave:– resistive loss of the inner conductor– resistive loss of the outer conductor– leakage loss between the inner and outer conductors
whereby the resistive losses are influenced by the ⇒ skin effect especially at high fre-quencies. It must also be noted that the current routes are longer if the conductorsurface is rough. The effective resistance and losses are greater than in the case ofconductors with a smooth surface.
The attenuation is normally stated as the logarithm of the ratio of the network inputsignal to the network output signal in Neper (N) or decibel (dB).
The following equation is used to calculate the attenuation from the input
and output powers of the network:
Attenuation constantsThe real component of the ⇒ propagation constant γ is described as the attenuationconstant. It describes the exponential reduction of the amplitudes of the current andvoltage as a function of the line length.
The attenuation constant is zero for zero-loss lines, i.e. for lines where the resistanceper unit length and the conductance per unit length are equal to zero.
For relatively low loss lines where G’ << ωC’ (C´ capacitance per unit length) andR’ << ωL’ (L´ inductance per unit length) the equation
gives a real value for the attenuation constants which is solely dependent on the lineparameters.
Characteristic impedanceCharacteristic parameter of a transmission line for the calculation of the current andvoltage distribution on the transmission line and its transformation properties. Thecharacteristic impedance is defined as the quotient of the voltage and current at anypoint on the transmission line, if solely a traveling wave exists on the transmission line.
On a low-loss transmission line where R’<< wL’ and G’<< wC’, the characteristicimpedance can be determined by
If the transmission line is coaxial and has an external conductor with diameter D, aninner conductor with diameter d and an insulation with the dielectric constant εr, thenthe characteristic impedance of the transmission line can be calculated using
Coaxial connectorA coaxial connector should provide a connection between two lines of the samecharacteristic impedance, that is as uniform, reliable and reflection-free as possible. Itshould be simple to connect and disconnect, possess good electrical transmissioncharacteristics and offer a high degree of insensitivity to electromagnetic interference.The ⇒ characteristic impedance of the connector can be very well matched to thecharacteristic impedance of the various cables.
One can differentiate between two basic types of connector:– the polarized connector, where one part has a (male) plug pin contact and the
other part, a (female) socket contact, and– the non-polarized connector, where the connector elements to be connected
are generally symmetrical in form and the contact at the inner and outer conduc-tors is achieved by a butt contact.
The inner conductor is mostly retained within the outer conductor by means of adielectric support. The design of this support significantly influences the reflectionbehavior of the connector.
Coaxial cavity resonatorTransmission line sections of particular lengths and termination resistances possesssimilar resonance characteristics to oscillating circuits comprising capacitance,inductance and resistance. Depending on the layout, parallel or serial resonance canbe generated.
CrosstalkMutual interference of signals in neighboring transmission lines or electrical systemsby electrical, magnetic and/or electromagnetic coupling.– Shielding– EMC– Transfer impedance
Cutoff frequencyThe highest frequency at which only the fundamental wave of the correspondingwaveguide can be propagated. The transmission characteristics of the waveguidecan become unstable above the cutoff frequency due to the occurrence of highermodes.
The cutoff frequency for coaxial cables describes the maximum frequency at whichonly the fundamental wave of the ⇒ two-wire line, the TEM00 wave, can be propa-gated. It can be calculated by:
where – εr = relative dielectric constant of the insulator– c = speed of light– d,D = diameters of the inner and outer conductors
Dielectric constantThe insulation or dielectric materials used in electrical engineering are characterizedby several material constants. The loss factor tanδ and the relative dielectric constantεr of the insulating material are the main parameters to be considered when selectingthe optimum dielectric material and the associated component design. Both parame-ters significantly influence the ⇒ propagation constant (and the ⇒ characteristicimpedance Z0 of a line or line section, e.g. of a connector.
The dielectric constant describes the behavior of the material in electric fields. The absolute dielectric constant ε0 = 8,8542 x 10-12 As/Vm applies to a vacuum asan insulator. The relative dielectric constant εr is to be observed for real materialsused in practical applications. The relative dielectric constant εr is to be as low aspossible for most applications. Examples of the relative dielectric constant for materi-als often used as insulators are:– Air εr = 1.0006– Polystyrol εr ≈ 2.56 (frequency dependent)– PTFE εr ≈ 2,04 (frequency dependent)
EMCElectro-Magnetic Compatibility describes the degree of protection of an electricalsystem against external interference, or the degree of interference of other systemsby this system. The mutual interference of the systems can be caused by electrical,magnetic or electromagnetic fields. The reduction of the interference and the associ-ated increase in the EMC can be achieved mainly by appropriate ⇒ shielding
Equivalent line circuitThe representation of the line circuit by means of locally concentrated circuit ele-ments, which are calculated from the line parameters per unit length of the line sec-tion being considered. After applying these concentrated elements, line calculationscan be performed using the general Kirchhoff`s laws.
αU1
U2------ N[ ]ln= α 20
U1
U2------ dB[ ]log=
α N[ ] 8 686, α dB[ ]×=
α 10P1
P2----- dB[ ]log=
α R'2ZL--------
G'ZL
2----------+≈
ZLL'C'----=
Z060
εr
------- Dd---ln=
fG2c
π εr
---------- 1D d+------------×=
15Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Basics
Bas
ics
Free space impedanceFree space impedance represents the ratio of electrical to magnetic field strength fora plane wave in a vacuum. The relationship in the equation for two-wire lines gives theso-called free space impedance.
Input impedanceThe input impedance is the quotient of the complex voltage and the complex currentat the start of the line and is dependent upon the line parameters (⇒ characteristicimpedance and ⇒ propagation constant), the line length and also the line terminationresistance.
Depending upon the type of line terminator and the line length, the input impedancecan behave as an inductance or a capacitance. It can be equal to the characteristicimpedance or behave as a parallel or serial resonant circuit. This behavior is utilized togenerate circuit elements such as inductance, capacitance or resonators based onsuch line sections.
IntermodulationProduced new, undefined and unwanted signals on non-linear characteristics atcomponents in signals.
Intermodulation factors:– magnetic materials – contact force, contact surfaces– oxidized contact surfaces
Line parametersThe specific line parameters define the electrical properties of a line as the so-calledprimary ⇒ transmission line constants. They represent the circuit elements of the ⇒line equivalent circuit related to the line length. The following are defined:– Resistance per unit length R´
The ohmic line resistance for both the outgoing and return wires under consider-ation of the skin effect, related to a unit of length
– Inductance per unit length L´The line inductance for both the outgoing and return wires related to a unit of length
– Conductance per unit length G´The line conductance between the outgoing and return wires related to a unit of length
– Capacitance per unit length C´The line capacitance between the outgoing and return wires related to a unit of length.
The following values are typical for a low-loss coaxial line (G’<< ωC’ and R’<< ωL’)
where – D = diameter of the outer conductor– d = diameter of the inner conductor– μo = 1.256 * 10 -6 Vs / Am– εo = 8.854 * 10 -12 As / Vm– εr = relative dielectric constant of the dielectric used,
in the case of air 1.0006
Line transformerTransmission line sections possess certain transformation properties depending ontheir length, i.e. the resistance at the end of a line (termination resistance) is trans-formed into another resistance (input resistance) at the start of the line.
The λ/4- and λ/2 transformers are of special significance in this respect.
Measurement lineMeasurement lines are rigid transmission lines of the respective line type (e.g. wave-guide or coaxial line) with which the field distribution along the line is sampled using aspecially designed low power probe.
The mismatched test specimen, (e.g. a piece of coaxial cable of unknown, to bedetermined, characteristic impedance), which is fitted to the measurement line as theterminating resistance, causes a standing wave on the measurement line; this in turnhas a certain relationship between the maximum and minimum amplitudes, and fromthis, the ⇒ reflection coefficient of the test specimen can be calculated.
MismatchingIf the termination resistance of a line is different to its characteristic impedance, thenthe line is mismatched. Mismatching causes reflections and results in losses whichare generally undesirable. It is caused in coaxial connectors by deviations from thetheoretical design dimensions (tolerances) and also by inaccuracies in the assumedmaterial used for manufacture.The extent of the mismatching is characterized by the ⇒ reflection coefficient.
Mono mode range for coaxial cablesFrequency range within which only the Lecher wave is capable of propagation on thecoaxial cable and which is in turn responsible for the propagation parameters. A ⇒cutoff frequency occurs at the higher end of this mono mode range. Above this fre-quency, additional wave types can be stimulated (e.g. by line discontinuities) in wave-guide mode (E or H Modes) and can lead to irregularities. As an approximate calculation of the cutoff wavelength λc for other wave types inaddition to the Lecher wave, the following equation is valid for the ratio d/D > 0.2(D = diameter of the outer conductor and d = diameter of the inner conductor of thecoaxial cable).
Typical examples are – coaxial cross section 3/7 (N connector) f c ≈ 19 GHz – coaxial cross section 7/16 (7/16 connector) f c ≈ 8,3 GHz
Multiple reflectionsAs a general rule, most transmission lines do not have ideal terminations withoutreflections at both ends of the line. The waves that throughout the transmission sys-tem are reflected both at the input and the output ends are propagated. By thismeans, repeatedly reflected waves are propagated that superimpose themselves onthe primary waves. Continuous new reflections finally cause a resulting multiplereflection wave.
No-load impedance⇒ Input impedance of a line that is open at the remote end.
Phase constantThe imaginary component of the ⇒ propagation constant γ is designated as phaseconstant β. It indicates the gradient of the current and voltage phases as a function ofthe transmission line length.
For relatively low-loss lines, where G’ << ωC’ (C´ capacitance per unit length) andR’ << ωL’ (L´ inductance per unit length), the equation
gives a real value for the phase constant that is solely dependent on the line con-stants and the frequency.
Phase speedThe phase speed vph is the speed with which a voltage phase relationship is propa-gated on a transmission line. It is equal to the ratio of the angular frequency ω = 2πfand the phase constant β. It corresponds to the group velocity vgr for the Lecher or,on coaxial lines, TEM (Transversal Electro-Magnetic) waves and is the determinativevelocity for the transmission of information.
Z0μ0
ε0----- 377Ω≈=
L'μ0
2π------ D
d---ln=
C'2πε0εr
Dd---ln
---------------=
λcπ2--- d D+( ) H11[ ]≈
λc D d–( ) E01[ ]≈
β ω L'C'=
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com16
Basics
Propagation constant γThe propagation constant describes the longitudinal wave propagation along a con-ductor. Together with the ⇒ characteristic impedance, it permits the calculation ofthe current and voltage distribution on the conductor and their transformation char-acteristics.
Relatively simple ⇒ line equations can be stated for the special case of coaxial cableswhich represent the gradient of the voltage and current along the line as a function ofthe primary ⇒ transmission line constants (⇒ propagation constants per unit length)namely resistance per unit length R´, electrical conductance per unit length G´, capac-itance per unit length C´ and the inductance per unit length L´. The propagation con-stant γ is given with ⇒ attenuation constant α and ⇒ phase constant β.
The attenuation constant α is zero for zero-loss lines.
Rated voltageMaximum voltage that can be continuously applied to a connector, a cable or anyother electrical component without causing a permanent change to the technicalparameters or even the destruction of the component.
Reflection coefficientThe ratio of the voltage returning from the load to the voltage supplied by the genera-tor and measured at the terminating resistance is defined as the complex reflectioncoefficient. In the same manner, a definition based on the transmitted and reflectedcurrents is also possible.
The reflection coefficient is therefore related to the complex characteristic
impedance Z0 of the transmission line and the complex ⇒ termination resistance Z bythe equation
The values for the ⇒ voltage standing wave ratio and the ⇒ inverse voltage standingwave ratio can be calculated from the value of the reflection coefficient.As a practical example a reflection coefficient is named here resulting from the con-nection of a 50 Ω connector with a 75 Ω connector, which is quite possible withmany connectors, e.g. a BNC, whether intended or not:
corresponding to a voltage standing wave ratio (VSWR) s = 1.5 andan inverse voltage standing wave ratio m = 0.67.
Return loss coefficientLogarithmic measure for ⇒ reflection coefficient.
ShieldingShielding structures made from various metals or combinations of metals (housing,braids, foil tape, etc.) are employed to minimize the influence of electrical and mag-netic fields on electronic modules, components and circuits. The effectiveness of theshielding is dependent upon the quality and impermeability of the protective mea-sures and the type of materials ⇒ transfer impedance.
Short circuit impedance⇒ Input impedance of a line with a short circuit at the remote end.
Skin effectAlternating currents do not uniformly occupy the entire cross section of the conduc-tor, rather inductance effect in the conductor deflects the current towards the surfaceof the conductor, whereby this deflection increases with the frequency.
The resistive attenuation of a transmission line increases with the frequency as aresult of this skin effect.
The skin depth (equivalent thickness of the layer in which current flows) can be deter-mined using
where– f = frequency– σ = conductivity of the conductor material– σAg = 62 x106 S/m – σCu = 58 x106 S/m – μ0 = 1,256 10-6 Vs / Am – μr =relative permeability constant for the employed material
Smith chartRepresentation of the complex plane of the ⇒ reflection coefficient within the restric-tions of the unit circle. This contains lines of constant real components and constantimaginary components of complex resistances, each normalized respectively to the⇒ characteristic impedance. Resistance transformations on transmission lines andthe corresponding matching circuits can be calculated relatively easily using theSmith chart.
⇒ Line transformer.
TEM waveTransversal Electro-Magnetic waves possess electrical and magnetic field compo-nents that lie exclusively in one plane that is transversal (vertical) to the propagationdirection. No components exist in the propagation direction. The fundamental wavescapable of propagation on ⇒ twin-wire lines (e.g. coaxial lines) are of the TEM type.
Test voltageThe maximum voltage to which a component (e.g. connector) may be subjectedunder defined environmental conditions (temperature, atmospheric pressure) for aspecified time without causing its destruction.
Transfer impedanceThe design of the outer conductor of coaxial cables is responsible for the shieldingeffect. Its impermeability, i.e. the portion of the electromagnetic wave carried downthe coaxial cable that is radiated through the outer conductor, is defined by the trans-fer impedance.
The transfer impedance Zk of a section of line (e.g. cable, connector) is defined as thequotient of the voltage difference measured between the ends of the outer conductorof the line section and the current flowing in the inner conductor. The specification ofthe specific transfer impedance i.e. transfer impedance per unit length, is meaningfulfor coaxial cables.
A high frequency system consisting of cables with respective connectors is moreimpermeable when the transfer impedance of the system or its individual compo-nents is small at a comparable frequency. The connection points of the connector tothe coaxial cable cause additional transfer impedance which increases approximatelyproportional to the frequency. Special attention should be paid to the correct andlow-inductance layout of these connection points.
Transmission coefficient gMeasurement of the degree of transmission of a signal through a two port network:ratio of the transmitted wave voltage amplitudes to the wave at the input to the twoport network.
Transmission equationsUsing the transmission equations, the current and voltage profiles on the line can becalculated as a function of the ⇒ transmission line constants (characteristic imped-ance and propagation constant) as well as the frequency and line length.
Transmission line constantsThe transmission line constants are the characteristic parameters of a transmissionline. A differentiation is made between the primary specific transmission line con-stants (capacitance per unit length C´, inductance per unit length L´, resistance perunit length R´, and the electrical conductance per unit length G´), and the secondarytransmission line constants ⇒ characteristic impedance Z and the ⇒ propagationconstant γ.
γ α jβ+=
rZ Z0–( )Z Z0+( )-------------------=
r 75 50–( )75 50+( )
---------------------- 0 2,= =
α 20 r( )log–=
δ 1fπσμ0μr
----------------------=
17Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Basics
Bas
ics
Two-wire lineThe most common type of electrical cable consists of two individual, mutually insu-lated conductors. The technical design can vary considerably, ranging from a parallelconductor type cable to a concentric coaxial cable. The most common wave modeencountered on a two-wire line is the Lecher wave (⇒ TEM mode). This possessesonly transverse electrical or magnetic field components but none in the direction ofpropagation. The propagation of this type of wave on a line is possible for all wave-lengths. If the frequency is sufficiently high, special Type E or Type H waves can bepropagated, thus causing disturbances to the basic Lecher wave.
Relatively simple ⇒ line equations can be stated for two-wire lines which representthe gradient of the voltage and current along the line as a function of the primary⇒ transmission line constants, resistance per unit length R´, electrical conductanceper unit length G´, capacitance per unit length C´ and the inductance per unit lengthL´. R´ and G´ are small for the low-loss two-wire lines normally employed, and the fol-lowing generally apply:
R’ << ωL’ and G’ << ωC’
so that a real frequency-independent parameter Z0 results for the ⇒ characteristicimpedance.
This characteristic impedance is solely dependent on the geometric dimensions ofthe line and the employed dielectric, so that practical designs of two-wire lines andcomponents can be quite simply dimensioned on this basis.
VSWR (Voltage standing wave ratio)The ratio between the value of the largest and the smallest voltages on a loss-free lineis known as the ripple or voltage standing wave ratio s (where 1 ≤ s ≤ ∞). The recip-rocal value of the VSWR is known as the inverse voltage standing wave ratio m(where 0 ≤ m ≤ 1).
The value of s is linked with the ⇒ reflection coefficient r on a transmission lineaccording to the equation
WaveguideWaveguides are hollow tubes of variable dimensions with electrically conductingwalls, in which electromagnetic waves can propagate in an axial direction. Variouspropagation modes are possible. The transmission characteristics of a waveguide arecomparable to a high-pass. At frequencies higher than the cutoff frequency (that isdependent upon the geometry of the waveguide), the electromagnetic wave is propa-gated in a longitudinal direction. At frequencies below the cutoff frequency, the waverepresents a critically damped field. The fundamental wave of a waveguide is the nat-ural wave with the lowest cutoff frequency, i.e. the wave with the lowest frequencythat is capable of propagation. The mono mode range of a waveguide defines the fre-quency range for which there is only one wave in the waveguide that is capable ofpropagation.
The most commonly used waveguides possess rectangular, circular or ellipticalcross-sections.
Waveguide waves (mostly undesirable) can also be stimulated and propagated in acoaxial cable. The mono mode range dictated by the geometry of the coaxial linemust be carefully considered during design.
WavelengthLocal period duration of an oscillation.
co = Velocity of light in a vacuum
s 1 r+( )1 r–( )
-----------------=
λ 2πβ------=
mit β phase constant=( )
β ω L'C'=
or
λc0
f-----=
c01
ε0μ0
-------------- 2 997925 8×10 m/s,= =
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com18
Basics
1. Kabelbefestigung
Zum Anschluss des Steckverbinders an das vorgesehene Kabel sind verschiedeneMöglichkeiten vorgesehen, wobei die gewählte Anschlussart die konstruktive Ausfüh-rung des Steckverbinders wesentlich mitbestimmt.
Es werden unterschieden– Kabelbefestigung in Schraub-Klemm-Technik– Kabelbefestigung in Voll-Crimp-Technik– Kabelbefestigung in Löt-Crimp-Technik– Kabelbefestigung in Löt-Technik (Semi-rigid-Kabel).
a) Schraub-Klemm-Befestigung (klemm)Der Innenleiter des Steckverbinders wird mit dem Innenleiter des vorbereiteten Koaxi-alkabels verlötet, der Schirm des Kabels über eine Klemmkonus-Schraubpressungmit dem Steckverbinderkörper verbunden. Der Mantel des Kabels wird durch eineGummidichtung festgehalten. Vorteile: Die Verbindungsart ist zuverlässig und in bestimmten Grenzen feuchtigkeits-dicht, die Einzelteile des Steckverbinders sind wiederverwendbar. Die Bearbeitungkann auch unter Feldbedingungen erfolgen, es sind keine Spezialwerkzeuge erforder-lich, ausreichend sind einfache Maulschlüssel.
b) Voll-Crimp-Befestigung (crimp)Der Innenleiter des Steckverbinders wird mit seinem rohrförmigen Teil auf den Innen-leiter des vorbereiteten Koaxialkabels aufgeschoben und danach wird dieses rohrför-mige Teil definiert mittels eines speziellen angepassten Werkzeuges so verformt, dasseine Pressverbindung zwischen den beiden Teilen entsteht. Anschließend wird das sovorbereitete Kabel in den Steckverbinderkörper eingedrückt. Der Schirm des Kabelsliegt auf der Crimptülle des Körpers auf und wird durch Anpressen der Crimphülsefest mit diesem verbunden. Vorteile: Kostengünstige Variante für große Stückzahlen, sie liefert sehr gleichmäßigeKabelanschlüsse. Die Kabelfesthaltekraft erreicht hohe Werte, im Normalfall reißt dasKabel vor der Lösung der Crimpverbindung. Nachteile: Die Einzelteile des Steckver-binders sind nicht wiederverwendbar, zur Verarbeitung werden Spezialwerkzeugebenötigt.
c) Löt-Crimp-Befestigung (löt-crimp)Im Unterschied zur Befestigungsart b) werden die Innenleiter von Kabel und Steck-verbinder verlötet.
d) Löt-Befestigung (löt)Diese Anschlussart ist bei der Konfektionierung von halbstarren Kabeln (semi-rigid-Kabeln) üblich. Es existieren zwei Möglichkeiten: Bei der ersten werden Innenleiter und Gehäuse desSteckverbinders mit Innenleiter bzw. Außenleiter des Kabels verlötet, bei der zweitenwird der Innenleiter des Kabels gleichzeitig als Steckverbinder-Innenleiter mitbenutzt,und nur ein spezieller Außenleiterkörper wird mit dem Kabelmantel verlötet. Die zweiteVariante ist auf SMA-Steckverbinder beschränkt. Bei der Verarbeitung ist besonders auf Einhaltung der für das eingesetzte Isolations-material zulässigen Maximaltemperatur zu achten.
2. Kabelhaltekraft
Die Konstruktion der Kabelfesthaltung ist so ausgeführt, dass ihre Haltekraft auf jedenFall die Zugfestigkeit, die vom Aufbau des Kabels abhängig ist, übersteigt. Diese Zug-festigkeit entspricht den einschlägigen Normen (z. B. CECC 22 000) und wird vomHersteller des Kabels spezifiziert.Im Normalfall ist die Konstruktion des Steckverbinders so ausgelegt, dass vor demNachgeben der Kabelfesthaltung zuerst das Kabel selbst reißt.
3. Innenleiter-Festhaltung
Der Innenleiter kann im Koaxialsteckverbinder auf zwei verschiedene Arten angeord-net sein: – loser Innenleiter-Kontakt:
Der Innenleiterkontakt wird bei der Konfektionierung auf den Innenleiter des Kabel geschoben und mit diesem verbunden (Lötung oder Crimpung). Anschließend wird diese Verbindungsstelle in die Isolierstütze des Steckverbind-ers eingeschoben. Derartige Kontakte vermeiden Durchmessersprünge am Innenleiter und erlauben damit eine reflexionsarme Konstruktion.
– festgehaltener Innenleiter:Der Innenleiterkontakt besitzt eine Verdickung und wird mittels einer zweigeteilten Isolierstütze axial im Steckverbinderkörper festgehalten. Der Innenleitersprung wird elektrisch kompensiert, so dass der Einfluss auf den Reflexionsfaktor gering bleibt. Derartige Kontakte besitzen den Vorteil der präzisen mechanischen Posi-tionierung auch bei extremer thermischer oder mechanischer Belastung des Steckverbinders.
4. Leiterplattensteckverbinder für Durchsteck-montage
Im Gesamtsortiment ist eine Vielzahl von Steckverbindern für den Einsatz auf Leiter-platten vorhanden, wobei sich die Auswahl vor allem auf solche Steckverbinderserienkonzentriert, die von ihrer Größe und ihrer Masse her für derartige Anwendungengeeignet erscheinen.
Es existieren Bauformen für Stecker und Kuppler in gerader und winkliger Ausführungmit verschiedenen Rastermaßen und unterschiedlicher Anzahl von Kontaktstiften, dieKontaktierung zur Leiterplatte kann mittels Löt- oder Einpresstechnik erfolgen.
Einpresstechnik ist eine elektrisch und mechanisch saubere Verbindungsmethodeohne Lötung, wobei unterschiedlich gestaltete, meist elastisch verformbare Kontakt-stifte in die metallisierten Bohrungen der Leiterplatte eingepresst werden. An denBerührungsstellen zwischen den Einpresszonen der Kontaktstifte und den Metallwän-den der Bohrungen entstehen bei richtig aufeinander abgestimmter Dimensionierungvon Einpressbereich des Kontaktstiftes und Einpressloch elektrisch hochwertige undsehr zuverlässige sowie außerdem gasdichte Verbindungen. Diese lötfreie Verbin-dungsart vermeidet thermische Belastung der Leiterplatte und Bauelemente sowieKontaktverunreinigungen durch Lötchemikalien, sie ist reparaturfreundlich und beiFehlbestückung unkritisch. Deshalb und wegen einer Vielzahl anderer Gründe stelltsich die Einpresstechnik als kostengünstige Lösung für Massenfertigung dar.
5. Leiterplattensteckverbinder für Oberflächen-montage
Zunehmend werden in schnellen Digitalschaltungen und planaren Schaltungen imHF-Bereich auf sog. Printed Circuits Boards (PCB) Bauelemente eingesetzt, die keineDurchkontaktierung durch den Schaltungsträger benötigen.Diese Surface-Mount Devices (SMD) erlauben eine schnelle und zuverlässige Daten-übertragung auf sehr preisgünstigen Schaltungsträgern, da die Verbindungswegezwischen den einzelnen Bauteilen extrem kurz sind.Surface-Mounted Coaxial Connectors wurden mit den Erfordernissen der SMD-Technologie entwickelt. Es sind kostengünstige Miniatursteckverbinder, die eine hohePackungsdichte erlauben und den hohen elektrischen Ansprüchen bis zu 20 GHzgerecht werden. Sie realisieren Schnittstellen vom PCB zu weiteren PCB’s, Anten-nen, Modems, Endstufen und vielen mehr.
6. Glossar
AbschirmungZur Verringerung des Einflusses elektrischer und/oder magnetischer Felder auf elekt-rische Baugruppen, Bauteile oder Anordnungen werden Schirmaufbauten aus unter-schiedlichen Metallen oder Metallkombinationen (Gehäuse, Drahtgeflechte,Folienwickel o. ä.) benutzt, die diese zu schützenden Anordnungen umgeben. DerGrad der Abschirmung richtet sich nach Güte und Dichtigkeit der Abschirmmaßnah-men und der Art der eingesetzten Materialien. ⇒ Kopplungswiderstand (Transferim-pedanz)
Ausbreitungskonstante γDie Ausbreitungskonstante ist die charakteristische Kenngröße einer Leitung, die dieWellenausbreitung auf dieser Leitung in Längsrichtung beschreibt. Zusammen mitdem ⇒ Wellenwiderstand gibt sie die Möglichkeit zur Berechnung der Strom- undSpannungsverteilung auf der Leitung sowie deren Transformationseigenschaften.
Für den Spezialfall Koaxialleitung lassen sich relativ einfache ⇒ Leitungsgleichungenaufstellen, die den Verlauf der Spannung und des Stromes auf der Leitung als Funk-tion der primären ⇒ Leitungskonstanten (⇒ Leitungsbeläge) Widerstandsbelag R’,Leitwertsbelag G’, Kapazitätsbelag C’ und Induktivitätsbelag L’ wiedergeben. DieAusbreitungskonstante γ kann dann wie folgt angegeben werden
mit ⇒ Dämpfungskonstante α und ⇒ Phasenkonstante β.Für verlustlose Leitungen ist die Dämpfungskonstante α gleich Null.
BetriebsspannungMaximale Spannung, die auf Dauer an einen Steckverbinder, an ein Kabel oder allge-mein an ein beliebiges Bauteil angelegt werden kann, ohne dass sich die technischenParameter dieses Bauteils bleibend verändern oder es sogar zerstört wird.
γ α jβ+=
19Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Basics
Bas
ics
DämpfungAbschwächung eines Signals beim Durchgang durch einen verlustbehafteten Vierpol,wobei auch ein Abschnitt einer Übertragungsleitung als solcher angesehen werdenkann. Auf der koaxialen Leitung bewirkt die Summe folgender Verlustanteile dieDämpfung der übertragenen elektromagnetischen Welle:– Widerstandsdämpfung des Innenleiters,– Widerstandsdämpfung des Außenleiters,– Ableitungsdämpfung zwischen Innen- und Außenleiter,
wobei die Widerstandsdämpfungen besonders bei hohen Frequenzen maßgeblichdurch den ⇒ Skineffekt beeinflusst werden. Weiterhin ist zu beachten, dass bei Lei-tern mit rauhen Oberflächen die Stromwege länger und damit die Wirkwiderständeund Verluste größer sind als bei Leitern mit glatten Oberflächen.
Die Dämpfung wird allgemein als logarithmisches Maß des Verhältnisses Signalspan-nung am Eingang zu Signalspannung am Ausgang des Vierpoles in Neper [N] oderDezibel [dB] angegeben.
Zur Berechnung der Dämpfung aus Ein- und Ausgangsleistung des Vierpols benutztman die Beziehung
DämpfungskonstanteAls Dämpfungskonstante wird der Realteil der ⇒ Ausbreitungskonstanten γ bezeich-net, sie gibt die exponentielle Abnahme der Amplituden von Spannung und Strom alsFunktion der Leitungslänge an.
Die Dämpfungskonstante ist gleich Null bei verlustlosen Leitungen, d. h. bei Leitun-gen, bei denen der Widerstandsbelag R’ und der Leitwertsbelag G’ gleich Null sind.
Für relativ verlustarme Leitungen mit G’ << ωC’ (C’ Kapazitätsbelag) und R’ << ωL’(L’ Induktivitätsbelag) ergibt sich mit
für die Dämpfungskonstante eine reelle, nur von den Leitungsparametern abhängigeGröße.
DielektrizitätskonstanteDie in der Elektrotechnik eingesetzten Isolierstoffe oder Dielektrika werden durchmehrere Materialkonstanten gekennzeichnet, wobei für die Auswahl des optimalenDielektrikums und für die dadurch bestimmte Konstruktion des Bauteils hauptsächlichder Verlustfaktor tanδ und die relative Dielektrizitätskonstante εr des Isolierstoffesbeachtet werden müssen. Beide Kenngrößen bestimmen ganz wesentlich die⇒ Ausbreitungskonstante und den ⇒ Wellenwiderstand Z0 einer Leitung oder einesLeitungsabschnittes, z. B. einer Steckverbindung.
Die Dielektrizitätskonstante beschreibt das Verhalten des betreffenden Materials inelektrischen Feldern. Für Vakuum als Isolierstoff gilt die absolute Dielektrizitätskons-tante ε0 = 8,8542 x 10-12 As/Vm, für praktisch einsetzbare Materialien muss die rela-tive Dielektrizitätskonstante εr des jeweiligen Materials beachtet werden, wobei für diemeisten Anwendungsfälle gilt, dass εr möglichst niedrig zu halten ist. Als Beispiel dierelativen Dielektrizitätskonstanten häufig eingesetzter Isolierstoffe:– Luft εr = 1,0006 – Polystyrol εr ≈ 2,56 (frequenzabhängig) – PTFE εr ≈ 2,04 (frequenzabhängig)
DoppelleitungAm häufigsten benutzte Form der elektrischen Leitung, die aus zwei voneinander iso-lierten Einzelleitern besteht. Dabei kann die technische Ausführungsform sehr ver-schiedenartig sein, sie reicht von der Paralleldrahtleitung bis zur konzentrischaufgebauten Koaxialleitung. Der am häufigsten auftretende Wellentyp auf einer Dop-pelleitung ist die Lecherwelle (⇒ TEM-Typ), die nur transversale elektrische bzw.magnetische Feldstärkekomponenten, aber keine in Ausbreitungsrichtung besitzt. DieAusbreitung dieses Wellentyps auf der Leitung ist bei beliebigen Wellenlängen mög-lich. Daneben können sich bei genügend hohen Frequenzen auch spezielle Hohlleiter-wellen vom E- oder H-Typ ausbreiten und den eigentlichen Grundtyp Lecherwellestörend beeinflussen.
Für die Doppelleitung lassen sich relativ einfache ⇒ Leitungsgleichungen aufstellen,die den Verlauf der Spannung und des Stromes auf der Leitung als Funktion der pri-mären ⇒ Leitungskonstanten Widerstandbelag R’, Leitwertsbelag G’, Kapazitätsbe-lag C’ und Induktivitätsbelag L’ wiedergeben. Dabei sind R’ und G’ bei dernormalerweise angewandten verlustarmen Doppelleitung klein und es gilt ganz allge-mein
R’ << ωL’ und G’ << ωC’
so dass sich für den ⇒ Wellenwiderstand eine reelle frequenzunabhängige Größe Z0
ergibt.
Dieser Wellenwiderstand ist nur noch von den geometrischen Abmessungen der Lei-tung und vom eingesetzten Dielektrikum abhängig, so dass praktische Ausführungenvon Doppelleitungen und Bauteile daraus recht einfach dimensioniert werden kön-nen.
Eindeutigkeitsbereich der KoaxialleitungFrequenzbereich, in dem auf der Koaxialleitung (⇒ Doppelleitung) nur die Lecherwelleausbreitungsfähig und für die Ausbreitungsparameter verantwortlich ist. Am hochfre-quenten Ende dieses Eindeutigkeitsbereiches existiert eine ⇒ Grenzfrequenz, ober-halb derer zusätzlich verschiedene Wellentypen vom Hohlleitermodus (E- oder H-Modi) angeregt werden können (z. B. durch Leitungsdiskontinuitäten), die zu Unregel-mäßigkeiten führen können. Als Näherung zur Ermittlung der Grenzwellenlänge λc fürden möglichen Einsatzpunkt anderer Wellentypen zusätzlich zur Lechwelle kann fürdas Verhältnis d/D > 0,2 (D Durchmesser des Außenleiters und d Durchmesser desInnenleiters der Koaxialleitung) angegeben werden
Praktische Beispiele sind– Koaxialquerschnitt 3/7 (N-Connector) f c ≈ 19 GHz – Koaxialquerschnitt 7/16 (7/16-Connector) f c ≈ 8,3 GHz
EingangswiderstandDer Eingangswiderstand ist der Quotient aus komplexer Spannung und komplexemStrom am Anfang der Leitung und ist sowohl von den Parametern der Leitung(⇒ Wellenwiderstand und ⇒ Ausbreitungskonstante) als auch von der Leitungslängeund vom Widerstand, mit dem das Ende der Leitung abgeschlossen ist, abhängig.
Je nach Art des Leitungsabschlusses und der Leitungslänge kann der Eingangswi-derstand sich verhalten wie eine Induktivität oder eine Kapazität, er kann gleich demWellenwiderstand sein oder das Verhalten eines Parallel- oder Serienresonanzkreisesbesitzen. Diese Eigenschaft wird benutzt, um mit derartigen LeitungsabschnittenSchaltelemente wie Induktivitäten, Kapazitäten oder Resonatoren zu erzeugen.
EMVElektro-Magnetische Verträglichkeit beschreibt den Grad des Schutzes eines elektri-schen Systems gegen Einflüsse von außen oder den Grad der Beeinflussung andererelektrischer Systeme durch dieses System. Die gegenseitige Beeinflussung der Sys-teme kann dabei durch elektrische, magnetische und/oder elektromagnetische Feldererfolgen. Die Verringerung der Beeinflussung und damit die Vergrößerung der EMV istmeist durch entsprechende ⇒ Abschirmung möglich.
FehlanpassungUnterscheidet sich der Widerstand, mit dem eine Leitung abgeschlossen ist, vom⇒ Wellenwiderstand dieser Leitung, so ist diese Leitung fehlangepasst. DurchFehlanpassung werden Reflexionen und damit Verluste hervorgerufen, die im allge-meinen unerwünscht sind. Fehlanpassungen werden bei koaxialen Steckverbindun-gen durch Abweichung der Fertigungsmaße von den theoretischen Entwurfsmaßen(Toleranzen) sowie von nicht genau bekannten Materialkennwerten der eingesetztendielektrischen Materialien hervorgerufen.
Die Größe der Fehlanpassung wird durch den ⇒ Reflexionsfaktor gekennzeichnet.
FeldwellenwiderstandDer Feldwellenwiderstand stellt bei einer ebenen Welle das Verhältnis von elektrischerzu magnetischer Feldstärke im Vakuum dar. Die in den im Zusammenhang mit⇒ Doppelleitungen aufstellbaren Gleichungen vorkommende Beziehung
gibt den sogenannten Feldwellenwiderstand des freien Raumes an.
αU1
U2------ N[ ]ln= α 20
U1
U2------ dB[ ]log=
α N[ ] 8 686, α dB[ ]×=
α 10P1
P2----- dB[ ]log=
α R'2ZL--------
G'ZL
2----------+≈
λcπ2--- d D+( ) H11[ ]≈
λc D d–( ) E01[ ]≈
Z0μ0
ε0------ 377Ω≈=
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com20
Basics
GrenzfrequenzHöchste Frequenz, bei der kein anderer als der Grundtyp des betreffenden Wellenlei-ters ausbreitungsfähig ist. Oberhalb der Grenzfrequenz können die Übertragungsei-genschaften des Wellenleiters wegen des Auftretens höherer Modi unstabil werden.
Für Koaxialleitungen beschreibt die Grenzfrequenz die Frequenz, bis zu der nur dieGrundwelle der ⇒ Doppelleitung, die TEM00-Welle, ausbreitungsfähig ist. Sie kannberechnet werden zu
mit – εr relative Dielektrizitätskonstante des Isolators– c Lichtgeschwindigkeit – d,D Durchmesser von Innen- und Außenleiter
HohlleiterHohlleiter sind Hohlrohre mit verschiedener möglicher Geometrie mit elektrisch leiten-den Wänden, in denen sich elektromagnetische Wellen in axialer Richtung ausbreitenkönnen, wobei verschiedene Ausbreitungsmodi möglich sind. Die Übertragungsei-genschaften eines Hohlleiters sind mit einem Hochpass vergleichbar: Bei Frequen-zen, die oberhalb einer von der Hohlleitergeometrie abhängigen Grenzfrequenzliegen, breitet sich die elektromagnetische Welle in Längsrichtung aus, bei Frequen-zen unterhalb der Grenzfrequenz stellt die Welle in Längsrichtung ein aperiodischgedämpftes Feld dar. Die Grundwelle eines Hohlleiters ist die Eigenwelle mit der nied-rigsten Grenzfrequenz, also die Welle, die mit der niedrigsten Frequenz ausbreitungs-fähig ist. Der Eindeutigkeitsbereich eines Hohlleiters gibt den Frequenzbereich an, fürden es im Hohlleiter nur eine ausbreitungsfähige Welle gibt.
Die gebräuchlichsten Hohlleiter besitzen rechteckförmigen, kreisrunden oder ellipti-schen Querschnitt.
Auch in der Koaxialleitung sind (meist unerwünschte) Hohlleiterwellen anregbar undausbreitungsfähig, bei der Dimensionierung der Koaxialleitung ist der geometrischbestimmte Eindeutigkeitsbereich zu beachten.
IntermodulationDie Entstehung neuer, nicht gewünschter Signale (IM Produkte) an nichtlinearenKennlinien von Bauteilen im Signalpfad.
Intermodulationsfaktoren:– magnetische Werkstoffe – Kontaktkräfte, Kontaktflächen– Korrosion und Oxidschichten
Koaxiale SteckverbindungEine koaxiale Steckverbindung soll eine möglichst konstante, zuverlässige und reflexi-onsarme Verbindung zweier Leitungen gleichen Wellenwiderstandes herstellen. Siemuss sich möglichst einfach stecken und lösen lassen, soll gute elektrische Übertra-gungseigenschaften besitzen und gegenüber elektromagnetischen Störfeldern weit-gehend unempfindlich sein. Der ⇒ Wellenwiderstand der Steckverbindung kann denWellenwiderständen der unterschiedlichen Kabel sehr gut angepasst werden.
Zwei grundsätzliche Steckverbinderarten können unterschieden werden: – die polarisierte Steckverbindung, wobei der eine Teil einen Steckerstift-Kontakt
(Männchen, male) und der andere Teil einen Buchsenkontakt (Weibchen, female) besitzt, und
– die nichtpolarisierte Steckverbindung, wobei die zu verbindenden Steck-verbindungsteile im allgemeinen symmetrisch gestaltet sind und der Kontakt am Innen- und Außenleiter durch Stirnkontakt erreicht wird.
Der Innenleiter wird meist durch eine dielektrische Stütze im Außenleiter gehalten, dieKonstruktion dieser Stütze beeinflusst stark das Reflexionsverhalten der Steckverbin-dung.
KopplungswiderstandDie Konstruktion des Außenleiters bei Koaxialkabeln ist für die Abschirmwirkung ver-antwortlich, ihre Dichtigkeit, d. h. der Grad der Abstrahlung der über das Koaxialkabelgeführten elektromagnetischen Welle durch den Außenleiter, wird durch den Kopp-lungswiderstand (oder Transferimpedanz) beschrieben.
Als Kopplungswiderstand Zk eines Leitungsstückes (z. B. Kabel, Steckverbindung) istder Quotient der zwischen den Enden des Außenleiters dieses Leitungsstückesgemessenen Spannungsdifferenz und dem im Inneren des Leitungsstückes fließendenStromes definiert. Bei Koaxialkabeln ist die Angabe des spezifischen Kopplungswider-standes, d. h. Kopplungswiderstand pro Kabellänge sinnvoll.
Ein hochfrequentes System, bestehend aus Kabeln und den entsprechenden Steck-
verbindern, ist umso dichter, je kleiner der Kopplungswiderstand des Systems oderder Einzelkomponenten bei vergleichbarer Frequenz ist. Die Anschlussstellen der Steckverbinder an das Koaxialkabel geben zusätzlicheKopplungswiderstände, die näherungsweise proportional zur Frequenz ansteigen, aufihre einwandfreie und induktionsarme Gestaltung muss besonderer Wert gelegt wer-den.
Kurzschlusswiderstand⇒ Eingangswiderstand einer Leitung bei Kurzschluss am Leitungsende.
Leerlaufwiderstand⇒ Eingangswiderstand einer Leitung bei offenem Leitungsende.
LeitungsbelägeDie Leitungsbeläge beschreiben als sogenannte primäre ⇒ Leitungskonstanten dieelektrischen Eigenschaften einer Leitung, sie stellen die auf die Leitungslänge bezoge-nen Werte der Schaltelemente des ⇒ Leitungsersatzschaltbildes dar. Im Einzelnensind definiert:– Widerstandsbelag R’
auf die Längeneinheit bezogener ohmscher Leitungswiderstand für Hin- und Rückleitung gemeinsam unter Berücksichtigung des Skineffektes,
– Induktivitätsbelag L’ auf die Längeneinheit bezogene Induktivität der Hin- und Rückleitung,
– Leitwertsbelag G’ auf die Längeneinheit bezogener Querleitwert zwischen Hin- und Rückleitung,
– Kapazitätsbelag C’ auf die Längeneinheit bezogene Querkapazität zwischen Hin- und Rückleitung.
Für eine verlustarme Koaxialleitung (G’<< ωC’ und R’<< ωL’) können angegeben wer-den:
mit – D = Außenleiterdurchmesser – d = Innenleiterdurchmesser – μo = 1,256 * 10 -6 Vs / Am– εo = 8,854 * 10 -12 As / Vm – εr = relative Dielektrizitätskonstante des eingesetzten
Dielektrikums, bei Luft 1,0006
LeitungsersatzschaltbildDarstellung der Leitung durch örtlich konzentrierte Schaltelemente, die aus den Lei-tungsbelägen und der zugehörigen Länge des betrachteten Leitungsstückes berech-net werden. Durch die Anwendung dieser konzentrierten Elemente ist dieBerechnung der Leitung mit den allgemeinen Kirchhoff’schen Regeln möglich.
LeitungsgleichungenMit den Leitungsgleichungen läßt sich der Verlauf von Strom und Spannung auf derLeitung als Funktion der ⇒ Leitungskonstanten (Wellenwiderstand und Ausbreitungs-konstante) sowie der Frequenz und der Leitungslänge berechnen.
LeitungskonstantenDie Leitungskonstanten sind die charakteristischen Kenngrößen einer Leitung, wobeiman die als primäre Leitungskonstanten bezeichneten Leitungsbeläge (Kapazitätsbe-lag C’, Induktivitätsbelag L’, Widerstandsbelag R’ und Leitwertsbelag G’) und die alssekundäre Leitungskonstanten bezeichneten Größen ⇒ Wellenwiderstand Z und⇒ Ausbreitungskonstante γ unterscheidet.
LeitungsresonatorLeitungsabschnitte bestimmter Länge und mit bestimmtem Abschluss zeigen ähnli-che Resonanzeigenschaften wie aus Kapazitäten, Induktivitäten und Widerständenaufgebaute Schwingkreise. Je nach Ausführung ist Parallel- oder Serienresonanzerzeugbar.
fG2c
π εr
------------ 1D d+-------------×=
L'μ0
2π------ D
d----ln=
C'2πε0εr
Dd----ln
-----------------=
21Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Basics
Bas
ics
LeitungstransformatorLeitungsabschnitte besitzen in Abhängigkeit von ihrer Länge bestimmte Transformati-onseigenschaften, d. h. der Widerstand am Ende einer Leitung (Abschlusswider-stand) wird in einen anderen Widerstand am Anfang der Leitung(Eingangswiderstand) transformiert.
Besondere Bedeutung in diesem Zusammenhang besitzen der λ/4- und der λ/2-Transformator.
MessleitungMessleitungen sind starre Übertragungsleitungen des jeweils betrachteten Lei-tungstyps (z. B. Hohlleiter oder Koaxialleitung), auf denen die Feldverteilung entlangder Leitung mit einer entsprechend ausgebildeten Sonde möglichst belastungsarmabgetastet werden kann.
Das als Abschlusswiderstand der Messleitung angebrachte und fehlangepassteMessobjekt, z. B. ein Stück einer Koaxialleitung mit unbekanntem Wellenwiderstand,der zu bestimmen ist, verursacht auf der Messleitung eine stehende Welle mitbestimmtem Verhältnis von Maximal- zu Minimalamplitude, aus dem der ⇒ Reflexi-onsfaktor des Messobjekts ermittelt werden kann.
PhasengeschwindigkeitDie Phasengeschwindigkeit vph ist die Geschwindigkeit, mit der sich eine bestimmtePhasenlage der Spannung auf einer Leitung ausbreitet. Sie ergibt sich als das Ver-hältnis von Kreisfrequenz ω = 2πf und Phasenkonstante β. Sie ist bei der z. B. aufKoaxialleitungen existierenden TEM – (Transversal-Elektro-Magnetische-) oderLecherwelle gleich der Gruppengeschwindigkeit vgr, d. h. der für die Übertragung vonNachrichten maßgebenden Geschwindigkeit.
PhasenkonstanteAls Phasenkonstante β wird der Imaginärteil der ⇒ Ausbreitungskonstanten γbezeichnet, sie gibt den Verlauf der Phasen von Spannung und Strom als Funktionder Leitungslänge an.
Für relativ verlustarme Leitungen mit G’ << ωC’ (C’ Kapazitätsbelag) und R’ << ωL’(L’ Induktivitätsbelag) ergibt sich mit
für die Phasenkonstante eine reelle, nur von den Leitungsparametern und der Fre-quenz abhängige Größe.
PrüfspannungMaximale Spannung, mit der ein Bauteil (z.B. ein Steckverbinder) unter bestimmtenUmgebungsbedingungen (Temperatur, Luftdruck u.ä.) für eine bestimmte Zeitspannebeaufschlagt werden kann, ohne dass dieses Bauteil zerstört wird.
ReflexionsfaktorAls komplexer Reflexionsfaktor wird das Verhältnis der rücklaufenden, d. h. der amVerbraucher reflektierten Spannung zur hinlaufenden, d.h. vom Generator geliefertenSpannung, am Leitungsabschluss, dem Abschlusswiderstand, definiert. In gleicherWeise ist eine Definition über die hin- und rücklaufenden Ströme möglich.
Der Reflexionsfaktor ist somit über die Beziehung
mit dem komplexen ⇒ Wellenwiderstand der Leitung Z0 und dem komplexen ⇒Abschlusswiderstand Z verbunden.
Aus dem Betrag des Reflexionsfaktors können die Werte für ⇒ Welligkeit und ⇒Anpassungsfaktor berechnet werden.
Als Beispiel aus der Praxis soll hier der Reflexionsfaktor genannt werden, der sich beider Kopplung eines 50 Ω- mit einem 75 Ω- Steckverbinder ergibt, was sich bei vielenSteckverbindern, z. B. BNC, sowohl gewollt als auch ungewollt durchaus ergebenkann:
entsprechend einer Welligkeit (VSWR) s = 1,5 und einem Anpassungsfaktor m = 0,67
Rückflussdämpfung (Return Loss)Logarithmisches Maß des ⇒ Reflexionsfaktors
SkineffektWechselströme erfüllen den Leiterquerschnitt nicht gleichmäßig, sie werden durchInduktionswirkung im Leiter zur Oberfläche hin verdrängt, wobei diese Stromverdrän-gung mit wachsender Frequenz zunimmt.
Die Widerstandsdämpfung einer Übertragungsleitung wird demzufolge mit wachsen-der Frequenz durch einen zusätzlichen Anteil erhöht, der auf den Skineffekt zurückzu-führen ist.
Das Eindringmaß (äquivalente Dicke der Schicht, in der die Stromleitung stattfindet),kann bestimmt werden nach
mit– f = Frequenz – σ = Leitfähigkeit des eingesetzten Leitermaterials – σAg = 62 x106 S/m – σCu = 58 x106 S/m – μ0 = 1,256 10-6 Vs / Am – μr = relative Permeabilitätskonstante des benutzten Materials
Smith-DiagrammDarstellung der komplexen Ebene des ⇒ Reflexionsfaktors in der Begrenzung desEinheitskreises. Darin existieren Linien konstanten Realteils und konstanten Imaginär-teils von komplexen Widerständen, wobei jeweils auf den ⇒ Wellenwiderstand nor-miert wird. Im Smith-Diagramm können auf relativ einfache WeiseWiderstandstransformationen auf Leitungen und damit Anpassungsschaltungenberechnet werden.⇒ Leitungstransformator
TEM-WelleTransversal-Elektro-Magnetische Wellen besitzen elektrische und magnetische Feld-komponenten, die nur in einer Ebene transversal (senkrecht) zur Ausbreitungsrichtungliegen, es existieren keine Komponenten in Ausbreitungsrichtung. Die auf ⇒ Doppel-leitungen (z. B. Koaxialleitung) ausbreitungsfähigen Grund-Wellen sind vom Typ TEM.
Transferimpedanz⇒ Kopplungswiderstand
ÜbersprechenGegenseitige Beeinflussung von Signalen in benachbarten Leitern oder elektrischeSystemen durch elektrische, magnetische und/oder elektromagnetische Kopplung.– Abschirmung – EMV – Kopplungswiderstand
Übertragungsfaktor gMaß für den Grad der Übertragung eines Signales über einen Vierpol : Verhältnis derSpannungsamplituden der übertragenen Welle und der Welle am Eingang des Vier-pols.
VielfachreflexionenIn einem Leitungssystem gilt allgemein, dass in den meisten Fällen weder am Anfangnoch am Ende der Leitung ein idealer Abschluss ohne jede Reflexion vorhanden ist.Die sich auf dem Leitungssystem ausbreitenden Wellen werden dann sowohl am Ein-gang als auch am Ausgang reflektiert, dadurch breiten sich zusätzlich neue reflektierteWellen aus, die sich den primären Wellen überlagern. Durch fortlaufende neue Refle-xionen entsteht schließlich eine resultierende, vielfach reflektierte Welle.
VSWR (Stehwellen-Verhältnis)Als Stehwellen-Verhältnis s (mit 1 ≤ s ≤ ∞) ist das Verhältnis der Beträge der größtenund der kleinsten Spannung auf einer verlustlosen Leitung zu verstehen. Der rezip-roke Wert der Welligkeit wird als Anpassungsfaktor m (mit 0 ≤ m ≤ 1) bezeichnet.
Mit dem ⇒ Reflexionsfaktor auf einer Leitung r ist s über folgende Beziehung ver-knüpft.
β ω L'C'=
rZ Z0–( )Z Z0+( )
--------------------=
r 75 50–( )75 50+( )---------------------- 0 2,= =
α 20 r( )log–=
δ 1fπσμ0μr
-------------------------=
s 1 r+( )1 r–( )
-------------------=
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com22
Basics
WellenlängeÖrtliche Periodenlänge einer Schwingung.
co = Lichtgeschwindigkeit im Vakuum
WellenwiderstandCharakteristische Kenngröße einer Leitung zur Berechnung der Strom- und Span-nungsverteilung auf einer Leitung sowie deren Transformationseigenschaften. Defi-niert wird der Wellenwiderstand als der ortsunabhängige Quotient der Spannung unddes Stromes an jedem Punkt der Leitung, wenn auf der Leitung nur eine fortschrei-tende Welle vorhanden ist.
Für eine verlustarme Leitung mit R’<< ωL’ und G’<< ωC’ kann der Wellenwiderstandmit
bestimmt werden.
Ist diese Leitung vom Typ koaxial und besitzt einen Außenleiter mit dem DurchmesserD und einen Innenleiter mit dem Durchmesser d sowie einen Isolierkörper mit derDielektrizitätskonstanten εr des eingesetzten Isolationsmaterials, so kann der Wellen-widerstand der Leitung berechnet werden zu
λ 2πβ
------=
mit β phase constant=( )
β ω L'C'=
or
λc0
f-----=
c01
ε0μ0
---------------- 2 997925 8×10 m/s,= =
ZLL'C'-----=
Z060
εr
-------- Dd----ln=
Die Koaxial-Steckverbinder-Serien SMP, Longwipe-SMP und
Mini-SMP werden in verschiedenen Einrastmechanismen mit
unterschiedlichen Festhaltekräften angeboten und werden
vor allem als PCB-Steckverbinder und in Board-to-Board-
Verbindungen eingesetzt.
Durch Verwendung von Adaptern, sogenannten Bullets, wird
mechanischer Toleranzausgleich ermöglicht bei weiterhin aus-
gezeichneten elektrischen Eigenschaften. Bullets sind in ver-
schiedenen Längen lieferbar, wodurch Leiterplattenabstände
beispielsweise ab 7,95 mm (Serie Mini-SMP) möglich sind.
SMP, Longwipe-SMP and Mini-SMP coaxial connector series are
available with different locating devices, main application fields are
as PCB connectors and in board-to-board connections.
Using adaptors, so-called bullets, equalization of radial and axial
misalignments is possible, maintaining constant electrical char-
acteristics. Bullets are available in different lengths to enable any
board spacing e.g. from 7.95 mm (Mini-SMP).
Contents
SMP
Longwipe-SMP
Mini-SMP
SMP, Longwipe-SMP, Mini-SMP
SM
P,
Long
wip
e-S
MP
M
ini-
SM
P
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com26
SMP
1SMP
Interface Dimensions SMP Code 19
SMP
REFERENCE PLANE
Referenzebene
REFERENCE PLANE
Referenzebene
FEMALEKuppler
MALEStecker
D A B C AC
E
FG
F
H
I
K
D
E
Male | Stecker Female | Kuppler
dimension [mm] Smooth bore Limited detent Full detent
min. max. min. max. min. max. min. max.
A 0.356 0.406 0.356 0.406 0.356 0.406 1)
B 3.125 3.225 2.998 3.098 2.896 2.996
C 3.531 3.683 3.531 3.683 3.531 3.683 1) 3.43
D 3.125 3.225 3.125 3.225 0.00
E 2.74 2.84 2.74 2.84 2.74 2.84 0.00 0.20
F 1.143 1.397 1.143 1.397 1.143 1.397 3.35
G 0.839 0.939 0.839 0.939 0.839 0.939
H 1.397 1.447 1.397 1.447
I 1.982 2.082 1.982 2.082
K 2.185 2.285 2.185 2.285
1) resilient, dimension to meet electrical and mechanical requirements
SMP coaxial connectors are available as smooth bore, catchers mitt, limited detent and full detent versions, they are suitable for a wide range of board-to-board interconnectapplications up to 40 GHz - from low up to the highest mechanical loads, e. g. in telecommunication, test & measurement or aerospace applications.
PCB connectors are supplied in blister tapes.
SMP-Koaxial-Steckverbinder werden in den Festhaltevarianten Smooth bore, Catchers mitt, Limited detent und Full detent angeboten und eignen sich für vielseitige Board-to-Board-Verbindungen bis 40 GHz von geringer bis zu höchster mechanischer Beanspruchung, z. B. in Telekom- und Messtechnik-Anwendungen bis zu Anwendungen in Luft-und Raumfahrt.
PCB-Steckverbinder werden in Blistergurt-Verpackungen ausgeliefert.
FeaturesInterface according to US MIL-STD 348A, Fig. 326Frequency range DC to 40 GHzReturn loss (cable connector straight) ≥ 14 dB (typ.)Impedance 50 Ω Minimum board-to-board distance ≥ 9.05 mmSnap-on coupling
27Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Technology
Technical Data SMP Code 19
Applicable standards | Anwendbare Normen
Interface according to | Interface gemäß MIL-STD-348A, Fig. 326
Quality tested according to | Qualitätsprüfung gemäß MIL-STD-202
Electrical data | Elektrische Daten
Impedance | Wellenwiderstand 50 Ω
Frequency range | Frequenzbereich DC to 40 GHz
Return loss (cable connector straight) | Rückflussdämpfung (Kabelsteckverbinder gerade) ≥ 14 dB (typ.)
Insertion loss | Dämpfung ≤ 0.1 x √f (GHz) dB
Insulation resistance | Isolationswiderstand ≥ 5 GΩ
Center contact resistance | Übergangswiderstand Innenleiter ≤ 6 mΩ
Outer contact resistance | Übergangswiderstand Außenleiter ≤ 2 mΩ
Test voltage | Prüfspannung 500 V rms
Working voltage | Betriebsspannung 335 V rms
Power handling | Leistungsbelastbarkeit 65 W @ 2.2 GHz
Contact current | Kontaktstrombelastbarkeit ≤ 1.2 A DC
Mechanical data | Mechanische Daten
Mating cycles | Steckzyklen Full detent: ≥ 100Limited detent: ≥ 500Smooth bore, Catchers mitt: ≥ 1000
Center contact captivation | Innenleiter Haltekraft axial: ≥ 7 N
Engagement force | Steckkraft Full detent: ≤ 68 NLimited detent: ≤ 45 NSmooth bore, Catchers mitt: ≤ 9 N
Disengagement force | Ziehkraft Full detent: ≥ 22 NLimited detent: ≥ 9 NSmooth bore, Catchers mitt: ≥ 2.2 N
Board-to-board distance (min.) | Board-to-Board Abstand (min.) 9.05 mm
Environmental data | Umweltdaten
Temperature range | Temperaturbereich -65 °C to +155 °C
Thermal shock | Temperaturzyklen MIL-STD-202, Method 107, Condition B
Moisture resistance | Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106
Vibration | Vibration MIL-STD-202, Method 204, Condition B
Shock | Schock MIL-STD-202, Method 213, Condition A
Max. soldering temperature (PCB connectors) | Max. Löttemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 °C for 10 sec.
Materials | Materialien
Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating
Center contact | Innenleiter CuZn, Au plating
Outer contact | Außenleiter CuZn, Au plating
Crimping ferrule | Crimphülse Copper alloy, Au plating
Dielectric | Dielektrikum PTFE / PEEK / LCP
Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particularproducts can be provided on request from your Rosenberger sales partner.
Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Datenangegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung können einzelne Werte von Steckverbindern hiervon abweichen. SpezifischeDatenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com28
SMP
Cable Connectors
Cable Connectors Semi-Rigid Cables
Straight Plug, solderPanel mount; hexagonal flange
Semi-Rigid Cables
xOrdering Number Version Remarks Cable Group
Assembly Instruction
Panel Piercing / PCB Layout
Packing Unit
x19 S 601-271 L5 rear mount Limited detent 71 19 E4 B 54 100
x19 S 641-271 L5 rear mount Smooth bore 71 19 E4 B 54 100
x19 S 602-271 L5 Snap-in Limited detent 71 19 E4 ∅ 4.8 + 0.03 100
x19 S 60A-271 L5 front mount Limited detentstainless steel
71 19 E4 B 279 100
Straight Jack, solder Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction Packing Unit
x19 K 101-270 L5 26.5 GHz 70 19 E5 100
x19 K 107-270 L5 40 GHz 70 19 E13 100
x19 K 101-271 L5 26.5 GHz 71 19 E5 100
x19 K 107-271 L5 40 GHz 71 19 E13 100
x19 K 101-272 L5 26.5 GHz 72 19 E4 100
Right Angle Jack, solder Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction Packing Unit
x19 K 202-270 L5 26.5 GHz 70 19 E8 250
x19 K 202-271 L5 26.5 GHz 71 19 E8 500
9.9
ø 3.
7
10-4
8 U
NS
-2A
5.7 2.3
SW 6.35 SW 6.35
9.9
ø 3
6.1
ø 4.
8
2.5
9.4
ø 3
SW 6.3 SW 6.3
6.4
ø 4
3.4
12
ø 5
3.4
6.6
ø 4.
9
5.15
29Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Cable Connectors - Flexible Cables
Straight Jack, crimp Flexible Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Crimp Inserts Packing Unit
x19 K 102-101 L5 a = 15.7 mm 01 19 C2 11 W 150-402 100
x19 K 101-102 L5 a = 16.5 mm 02 59 G2 11 W 150-402 100
x19 K 101-103 L5 a = 16.5 mm 03 59 G2 11 W 150-403 100
x19 K 102-1X1 L5 a = 15.7 mm X1 19 C2 11 W 150-402 100
Right Angle Jack, solder-crimp Flexible Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Crimp Inserts Packing Unit
x19 K 202-301 L5 a = ∅ 4.05 mm 01 19 C1 11 W 150-102 100
x19 K 201-302 L5 a = ∅ 3.85 mm 02 19 C 11 W 150-102 100
x19 K 201-303 L5 a = ∅ 4.3 mm 03 19 C 11 W 150-103 100
x19 K 203-3X1 L5 X1 19 C1 11 W 150-102 100
a
ø 5
8.7
6.9
ø a
11
5.13.4
7.4
ø 4.05
11
5.65
3.9
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com30
SMP
Panel Connectors
Panel Connectors - Coaxial End
Panel Plug, hexagonal flange Coaxial End
xOrdering Number Remarks Packing Unit
x19 S 601-500 L5 Limited detentPanel feed through
100 blister
Panel Plug, hermetic sealed Coaxial End
xOrdering Number Remarks Assembly Instruction Packing Unit
x19 S 181-5H0 E4 Full detent 19 G 100
Panel Jack Coaxial End
xOrdering Number Panel Piercing / PCB Layout Packing Unit
x19 K 101-500 L5 M 4.5 x 0.35 100
9.8
ø 1.
5
17.7
10-5
6 U
NS
-2A
6
SW 6
4.32
1.27
9.7
ø 1.
1
M 4
.5 x
0.3
5
1.8
SW 4 SW 6
31Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
PCB Connectors
PCB Connectors - SMD
Straight Plug SMD
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x19 S 101-40M L5 Limited detent B 120 VG 01.01M00 100 blister, 1500 tape & reel
x19 S 10H-40M L5 Limited detentremovable plastic cap on suction area for tape & reel
B 120 VG 28.01M00 100 blister, 1500 tape & reel
x19 S 141-40M L5 Smooth bore B 120 VG 01.01M00 100 blister, 1500 tape & reel
x19 S 14H-40M L5 Smooth boreremovable plastic cap on suction area for tape & reel
B 120 VG 01.01M00 1500 tape & reel
x19 S 102-40M L5 Limited detentremovable plastic cap on suction area for tape & reelFrequency DC to 40 GHz
please request optimized foot-print for your application
VG 01.01M00 100 blister, 1500 tape & reel
x19 S 122-40M L5 Limited detent, stainless steelremovable plastic cap on suction area for tape & reelFrequency DC to 40 GHz
please request optimized foot-print for your application
100 blister
x19 S 144-40M L5 Catchers mitt B 127 VG 23.75000 100 blister, 750 tape & reel
x19 S 14K-40M L5 Catchers mittremovable plastic cap on suction area for tape & reel
B 127 VG 05.75000 750 tape & reel
x19 S 104-40M L5 Limited detent, a = 0 mm B 126 VG 24.01M00 100 blister, 1500 tape & reel
x19 S 10K-40M L5 Limited detent, a = 0 mmremovable plastic cap on suction area for tape & reel
B 126 VG 29.01M00 1500 tape & reel
x19 S 106-500 L5 pin-in-paste Limited detent, a = 0.8 mmremovable plastic cap on suction area for tape & reel
B 123 200 blister
x19 S 103-500 L5 pin-in-paste Limited detent, a = 2.5 mm B 123 200 blister
x19 S 103-400 L5 pin-in-paste Limited detent B 122 VG 33.01M00 100 blister, 750 tape & reel
x19 S 10A-400 L5 pin-in-paste Limited detentremovable plastic cap on suction area for tape & reel
B 122 VG 05.50000 100 blister,500 tape & reel
x19 S 143-400 L5 pin-in-paste Smooth bore B 122 VG 33.01M00 100 blister, 750 tape & reel
x19 S 147-400 L5 pin-in-paste Smooth bore B 122 VG 33.01M00 100 blister, 750 tape & reel
x19 S 14D-400 L5 pin-in-paste Smooth boreremovable plastic cap on suction area for tape & reel
B 122 VG 05.50000 500 tape & reel
Straight Plug, Panel mount SMD
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x19 S 10D-40M L5 rear mount Limited detent B 121 VG 19.01M00 100 blister, 1250 tape & reel
x19 S 10N-40M L5 rear mount Limited detentremovable sticker on suction area for tape & reel
B 121 VG 19.01M00 1250 tape & reel
5
4.1
4.5
4.4
4.1
ø 6
4.1
5
a
ø 0.7
6.6
6
2.5
6.6
6
2.5
ø 4.7
6
6
ø 4.2
5.3
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com32
SMP
Straight Jack/Plug Pair SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x19 K 10M-40M G Limited detentincl. 19S101-40M , 19K102-K00
B 120 100 blister
Right Angle Plug, PCB SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x19 S 201-40M L5 Limited detentremovable sticker on suction area for tape & reel
B 124 VG 22.01M00 200 blister, 1500 tape & reel
x19 S 241-40M L5 Smooth boreremovable sticker on suction area for tape & reel
B 124 VG 144.01M00 200 blister, 1500 tape & reel
x19 S 202-40M L5 Limited detent B 125 VG 03.01M00 100 blister,1500 tape & reel
x19 S 242-40M L5 Smooth bore B 125 VG 03.01M00 200 blister,1500 tape & reel
PCB Connectors - Solder Pin
Straight Plug, PCB Solder Pin
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x19 S 102-400 L5 Limited detent B 30 VG 32.01M00 100 blister,750 tape & reel
x19 S 145-400 L5 Smooth bore B 30 VG 32.01M00 100 blister,750 tape & reel
Right Angle Plug, PCB Solder Pin
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x19 S 201-400 L5 Limited detent B 30 100 blister
5
ø 4.2
8.3
4.1
5
5.1
4
1.6
5
4 3
7.4
3
6
7.1
6.61
6
2.5
3
5.4
6
9
8.4
ø 4.
5
33Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Adaptors
Adaptors
Bullet female-female
xOrdering Number Nominal Board-to-Board Distance1)
Bullet Length2) Minimum Board-to-Board Distance3)
Maximum Radial Tolerance4)
Packing Unit
x19 K 101-K00 L5 9.30 mm a=6.45 mm 9.07 mm 0.45 mm 100
x19 K 102-K00 L5 9.85 mm a=7.00 mm 9.62 mm 0.49 mm 100
x19 K 110-K00 L5 11.05 mm a=8.20 mm 10.82 mm 0.57 mm 100
x19 K 106-K00 L5 11.45 mm a=8.60 mm 11.22 mm 0.60 mm 500
x19 K 109-K00 L5 12.75 mm a=9.90 mm 12.52 mm 0.69 mm 500
x19 K 108-K00 L5 14.25 mm a=11.40 mm 14.02 mm 0.80 mm 500
x19 K 114-K00 L5 15.44 mm a=12.59 mm 15.21 mm 0.88 mm 500
x19 K 104-K00 L5 19.59 mm a=16.74 mm 19.36 mm 1.17 mm 500
x19 K 115-K00 L5 22.35 mm a=19.50 mm 22.12 mm 5) 300
x19 K 117-K00 L5 25.24 mm a=22.39 mm 25.01 mm 5) 300
x19 K 107-K00 L5 26.65 mm a=23.80 mm 26.42 mm 5) 300
x19 K 116-K00 L5 27.04 mm a=24.19 mm 26.81 mm 5) 300
1) When standard SMD-connectors are applied (e.g. 19 S 101-40M, 19 S 144-40M, ...).2) Bullets with special lengths on request.3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included.4) The maximum radial tolerance compensation is calculated by: sin(4°) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well
as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection.5) The maximum radial tolerance is limited to 1.2 mm because of the limited guide in range of the second PCB connector.
Adaptors (In Series)
xOrdering Number Version Remarks Return Loss
x19 S 101-S20 D3 straight SMP male - malecalibration adaptor
≥ 26 dB @ DC to 4 GHz≥ 20 dB @ 4 GHz to 18 GHz
x19 S 101-K20 D3 straight SMP male - femalecalibration adaptor
≥ 26 dB @ DC to 4 GHz≥ 20 dB @ 4 GHz to 18 GHz
x19 K 101-K20 D3 straight SMP female - femalecalibration adaptor
≥ 26 dB @ DC to 4 GHz≥ 20 dB @ 4 GHz to 18 GHz
a
ø 3.
43
23.4
ø 7
20.6ø7
17.8
ø7
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com34
SMP
Adaptors (Inter Series)
xOrdering Number Version Remarks Return Loss
x19 S 132-S00 S3 straight SMP male - SMA male
x19 S 132-K00 S3 straight SMP male - SMA female
x19 K 132-S00 D3 straight SMP female - SMA male
x19 K 132-K00 D3 straight SMP female - SMA female
x02 S 119-S00 E3 straight RPC-2.92 male - SMP male ≥ 32 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 26.5 GHz≥ 21 dB @ 26.5 GHz to 40 GHz
x02 S 119-K00 E3 straight RPC-2.92 male - SMP female ≥ 32 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 26.5 GHz≥ 21 dB @ 26.5 GHz to 40 GHz
x02 K 119-S00 E3 straight RPC-2.92 female - SMP male ≥ 32 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 26.5 GHz≥ 21 dB @ 26.5 GHz to 40 GHz
x02 K 119-K00 E3 straight RPC-2.92 female - SMP female ≥ 32 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 26.5 GHz≥ 21 dB @ 26.5 GHz to 40 GHz
x03 K 719-S22 S3 straightpanel
RPC-3.50 female - SMP male, full detent, 2-hole flange, floating test adaptor
≥ 30 dB @ DC to 12 GHz≥ 20 dB @ 12 GHz to 26.5 GHz
24
SW8
ø9
SW8
23.1
SW8
ø9
SW8
26
SW8
ø9
SW8
25.1
SW8
ø9
SW8
SW8
26.8
ø 9
SW7SW8
SW8
30
ø 9
SW7
SW8
31.8
ø 9
SW7
SW8
29
ø9
SW7
SW8
24.7
SW6
ø 20
35Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Terminations
Tools
Terminations
Termination Plug
xOrdering Number Remarks Return Loss Packing Unit
x19 S 15R-001 E4 1 WattFrequency: DC to 18 GHz
≥ 28.3 dB @ DC to 1 GHz≥ 20.1 dB @ 1 GHz to 18 GHz
1
Termination Jack
xOrdering Number Remarks Return Loss Packing Unit
x19 K 15R-001 E4 1 WattFrequency: DC to 18 GHz
≥ 28.3 dB @ DC to 1 GHz≥ 20.1 dB @ 1 GHz to 18 GHz
1
Special Tools
Extraction Tool
xOrdering Number Remarks Packing Unit
x19 W 002-000 for SMP connectors 1
Soldering Gauge
xOrdering Number Remarks Packing Unit
x11 W 115-000 for SMP connectorswidth of soldering gauge: a = 0.6 mm, thickness = 0.5 mm
1
ø 5
11.5
ø5
8.7
120
a
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com36
Longwipe-SMP
2Longwipe- SMP
Interface Dimensions Longwipe-SMP Code 17
Longwipe-SMP
FEMALEKuppler
MALEStecker
D
REFERENCE PLANE
Referenzebene
REFERENCE PLANE
Referenzebene
D
Male | Stecker Female | Kuppler
dimension [mm] min. max. min. max.
D 2.10 2.30 0.00 0.20
Longwipe-SMP coaxial connectors are designed for applications up to 6 GHz and enable radial tolerance compensation of ± 0.7 mm. Limited detent as well as catchers mitttypes - sliding contact with expanded guide-in range - are available.
Longwipe-SMP-Steckverbinder sind für Anwendungen bis 6 GHz konzipiert und ermöglichen einen radialen Toleranzausgleich von ± 0.7 mm. Longwipe-SMP-Stecker werdenals Limited detent- und Catchers mitt-Typen - gleitender Kontakt mit erweitertem Fangbereich - angeboten.
FeaturesInterface according to Rosenberger Longwipe-SMP seriesFrequency range DC to 6 GHzReturn loss (cable connector straight) ≥ 14 dB (typ.)Impedance 50 Ω Minimum board-to-board distance ≥ 9.31 mmSnap-on coupling
37Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Longwipe-SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Technology
Technical Data Longwipe-SMP Code 17
Applicable standards | Anwendbare Normen
Interface according to | Interface gemäß Rosenberger Longwipe-SMP
Quality tested according to | Qualitätsprüfung gemäß MIL-STD-202
Electrical data | Elektrische Daten
Impedance | Wellenwiderstand 50 Ω
Frequency range | Frequenzbereich DC to 6 GHz
Return loss (cable connector straight) | Rückflussdämpfung (Kabelsteckverbinder gerade) ≥ 14 dB (typ.)
Insertion loss | Dämpfung ≤ 0.1 x √f (GHz) dB
Insulation resistance | Isolationswiderstand ≥ 5 GΩ
Center contact resistance | Übergangswiderstand Innenleiter ≤ 6 mΩ
Outer contact resistance | Übergangswiderstand Außenleiter ≤ 2 mΩ
Test voltage | Prüfspannung 500 V rms
Working voltage | Betriebsspannung 335 V rms
Mechanical data | Mechanische Daten
Mating cycles | Steckzyklen Full detent: ≥ 100Limited detent: ≥ 500Smooth bore, Catchers mitt: ≥ 1000
Center contact captivation | Innenleiter Haltekraft axial: ≥ 7 N
Engagement force | Steckkraft Full detent: ≤ 68 NLimited detent: ≤ 45 NSmooth bore, Catchers mitt: ≤ 9 N
Disengagement force | Ziehkraft Full detent: ≥ 22 NLimited detent: ≥ 9 NSmooth bore, Catchers mitt: ≥ 2.2 N
Board-to-board distance (min.) | Board-to-Board Abstand (min.) 9.31 mm
Environmental data | Umweltdaten
Temperature range | Temperaturbereich -65 °C to +155 °C
Thermal shock | Temperaturzyklen MIL-STD-202, Method 107, Condition B
Moisture resistance | Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106
Vibration | Vibration MIL-STD-202, Method 204, Condition B
Shock | Schock MIL-STD-202, Method 213, Condition A
Max. soldering temperature (PCB connectors) | Max. Löttemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 °C for 10 sec.
Materials | Materialien
Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating
Center contact | Innenleiter CuZn, Au plating
Outer contact | Außenleiter CuZn, Au plating
Dielectric | Dielektrikum PTFE
Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particularproducts can be provided on request from your Rosenberger sales partner.
Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Datenangegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung können einzelne Werte von Steckverbindern hiervon abweichen. SpezifischeDatenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com38
Longwipe-SMP
PCB Connectors
PCB Connectors - SMD
Straight Plug SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x17 S 101-40M L5 Limited detent B 120 VG 01.01M00 100 blister, 1500 tape & reel
x17 S 144-40M L5 Catchers mitt B 127 VG 23.75000 100 blister, 750 tape & reel
5
4.1
6
4.6
39Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Longwipe-SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
AdaptorsMasterpage-Wechsel: Right or Left (1col)
Adaptors
Bullet female-female
xOrdering Number Nominal Board-to-Board Distance1)
Bullet Length2) Minimum Board-to-Board Distance3)
Maximum Radial Tolerance4)
Packing Unit
x17 K 117-K02 L5 9.25 mm a=6.65 mm 9.31 mm 0.46 mm 500
x17 K 117-K03 L5 23.60 mm a=21.00 mm 23.47 mm 5) 100
x17 K 117-K04 L5 40.02 mm a=36.70 mm 39.44 mm 5) 100
1) When standard SMD-connectors are applied (e.g. 17 S 101-40M, 17 S 144-40M, ...).2) Bullets with special lengths on request.3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included.4) The maximum radial tolerance compensation is calculated by: sin(4°) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well
as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection.5) The maximum radial tolerance is limited to 1.2 mm because of the limited guide in range of the second PCB connector.
ø 4.
45
a
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com40
Mini-SMP
3Mini- SMP
Interface Dimensions Mini-SMP Code 18
Mini-SMP
REFERENCE PLANE
Referenzebene
REFERENCE PLANE
Referenzebene
FEMALEKuppler
MALEStecker
A
E
G
FD C BB
H
H
Male | Stecker Female | Kuppler
dimension [mm] Smooth bore Full detent
min. max. min. max. min. max.
A 0.28 0.33 0.28 0.33
B 2.18 2.24 2.18 2.24 2.24 1)
C 2.79
D 2.82 2.92 2.82 2.92
E 2.08 2.13 2.08 2.13
F 0.76 1.14 0.76 1.14
G 1.57 1.83
H 0.53 0.58 1.73
1) Dimension to meet mechanical / electrical requirements
Mini-SMP connectors are extremely small coaxial connectors - approx. 70% of SMP size - for applications up to 65 GHz, mainly high-speed signal transmission , e.g. 10 or 40Gbit/s. Plugs are available as smooth bore-versions - for plug-in technology and back plane applications - and as vibration-resistant full detent types for highest mechanicalloads, e.g. in aerospace engineering.
Mini-SMP coaxial connectors are mateable with GPPO™ (Gilbert Engineering Co., Inc.) and SSMP™ (Connector Devices, Inc.) series. PCB connectors are supplied in blistertapes.
Mini-SMP-Steckverbinder sind extrem kleine Koaxial-Steckverbinder - 70% Baugröße im Vergleich zu SMP - für Anwendungen bis 65 GHz. Hauptanwendung ist die Übertra-gung von Hochgeschwindigkeitssignalen, z. B. bei 10 oder 40 Gbit/s. Stecker werden als Smooth bore-Ausführung - für Einschubtechnik- und "Back Plane"-Anwendungen -und als vibrationsstabile Full detent-Bauformen für höchste mechanische Beanspruchungen, z.B. in Luft- und Raumfahrt, angeboten.
Mini-SMP-Koaxial-Steckverbinder sind steckkompatibel mit den Steckverbinder-Serien GPPO™ (Gilbert Engineering Co., Inc.) und SSMP™ (Connector Devices, Inc.), PCB-Steckverbinder werden in Blistergurt-Verpackungen ausgeliefert.
FeaturesInterface according to US MIL-STD 348A, Fig. 328Frequency range DC to 65 GHzReturn loss (cable connector straight) ≥ 16 dB @ DC to 26.5 GHzImpedance 50 Ω Minimum board-to-board distance ≥ 7.95 mmSnap-on coupling
41Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Mini-SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Technology
Technical Data Mini-SMP Code 18
Applicable standards | Anwendbare Normen
Interface according to | Interface gemäß MIL-STD-348A, Fig. 328Mateable with GPPO™ (Gilbert Engineering Co., Inc) and SSMP™ (Connectors Devices, Inc)
Quality tested according to | Qualitätsprüfung gemäß MIL-STD-202
Electrical data | Elektrische Daten
Impedance | Wellenwiderstand 50 Ω
Frequency range | Frequenzbereich DC to 65 GHz
Return loss | Rückflussdämpfung ≥ 26 dB @ DC to 26.5 GHz≥ 17 dB @ 26.5 GHz to 50 GHz≥ 14 dB @ 50 GHz to 65 GHz
Insertion loss | Dämpfung ≤ 0.1 x √f (GHz) dB
Insulation resistance | Isolationswiderstand ≥ 5 GΩ
Center contact resistance | Übergangswiderstand Innenleiter ≤ 6 mΩ
Outer contact resistance | Übergangswiderstand Außenleiter ≤ 2 mΩ
Working voltage | Betriebsspannung 325 V rms
Mechanical data | Mechanische Daten
Mating cycles | Steckzyklen Full detent: ≥ 100Smooth bore: ≥ 500
Center contact captivation | Innenleiter Haltekraft axial: ≥ 7 N
Engagement force | Steckkraft Full detent: ≤ 19 NSmooth bore: ≤ 11 N
Disengagement force | Ziehkraft Full detent: ≥ 29 NSmooth bore: ≥ 11 N
Board-to-board distance (min.) | Board-to-Board Abstand (min.) 7.95 mm
Environmental data | Umweltdaten
Temperature range | Temperaturbereich -55 °C to +155 °C
Thermal shock | Temperaturzyklen MIL-STD-202, Method 107, Condition B
Moisture resistance | Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106
Vibration | Vibration MIL-STD-202, Method 204, Condition B
Shock | Schock MIL-STD-202, Method 213, Condition A
Max. soldering temperature (PCB connectors) | Max. Löttemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 °C for 10 sec.
Materials | Materialien
Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating
Center contact | Innenleiter CuZn / CuBe, Au plating
Outer contact | Außenleiter CuZn / CuBe, Au plating
Crimping ferrule | Crimphülse Copper alloy, Au plating
Dielectric | Dielektrikum PTFE
Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particularproducts can be provided on request from your Rosenberger sales partner.
Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Datenangegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung können einzelne Werte von Steckverbindern hiervon abweichen. SpezifischeDatenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com42
Mini-SMP
Cable Connectors
Cable Connectors Semi-Rigid Cables
Straight Jack Semi-Rigid Cables
xOrdering Number Cable Group Assembly Instruction Packing Unit
x18 K 101-270 L5 70 18 A 100
x18 K 102-271 L5 71 18 A1 100
Right Angle Jack Semi-Rigid Cables
xOrdering Number Cable Group Assembly Instruction Packing Unit
x18 K 202-270 L5 70 18 B1 100
x18 K 201-271 L5 71 18 B1 100
Cable Connectors - Flexible Cables
Right Angle Jack, solder crimp Flexible Cables
xOrdering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit
x18 K 201-301 L5 01 18 C 11 W 150-101 100
6.6
ø3.2
8.7
ø3.5
6.15
5.1
3.5
6.15
6
3.5
4.25
6.15
8.3
3.5
6.25
43Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Mini-SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Panel Connectors/PCB Connectors
Panel Connectors - Coaxial End
Panel Plug
xOrdering Number Remarks Assembly Instruction
Packing unit
x18 S 101-5H0 E4 Full detenthermetic sealed
18 D 100
PCB Connectors - SMD
Straight Plug SMD
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x18 S 101-40M L5 economy Full detentFrequency: DC to 26 GHz,a = 3.4 mm
B 204 VG 45.1M500 200 blister, 1500 tape & reel
x18 S 102-40M L5 Full detentFrequency: DC to 65 GHz,a = 4.07 mm
B 209 VG 45.1M500 200 blister, 1500 tape & reel
x18 S 141-40M L5 economy Smooth boreFrequency: DC to 26 GHz,a = 3.4 mm
B 204 200 blister
x18 S 142-40M L5 Smooth boreFrequency: DC to 65 GHz,a = 4.07 mm
B 209 200 blister
x18 S 143-40M L5 Smooth boreFrequency: DC to 65 GHz,a = 4.07 mmremovable plastic cap on suction area for tape & reel
B 209 VG 45.1M501 1500 tape & reel
Right Angle Plug SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x18 S 203-40M L5 Full detentFrequency: DC to 65 GHz
B 203 VG 50.2M500 200 blister, 2500 tape & reel
x18 S 243-40M L5 Smooth boreFrequency: DC to 65 GHz
B 203 200 blister
5.38
1.8
a
4
4
3 6.8
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com44
Mini-SMP
AdaptorsMasterpage-Wechsel: Right or Left (1col)
Adaptors
Bullet female-female
xOrdering Number Nominal Board-to-Board Distance1)
Bullet Length2) Minimum Board-to-Board Distance3)
Maximum Radial Tolerance4)
Packing Unit
x18 K 101-K00 L5 8.04 mm a = 5.30 mm 7.94 mm 0.36 mm 100
x18 K 118-K04 L5 10.11 mm a = 7.37 mm 10.01 mm 5) 250
x18 K 104-K00 L5 11.22 mm a = 8.48 mm 11.12 mm 5) 500
x18 K 107-K00 L5 13.72 mm a = 10.97 mm 13.62 mm 5) 250
1) When standard SMD-connectors are applied(e.g. 18 S 101-40M, 18 S 141-40M).
2) Bullets with special lengths on request.3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included.4) The maximum radial tolerance compensation is calculated by: sin(4°) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well
as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection.5) The maximum radial tolerance is limited to 0.4 mm because of the limited guide in range of the second PCB connector.
ø 2.
76
a
45Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Mini-SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
Adaptors (Inter Series)
xOrdering Number Version Remarks Return Loss Packing Unit
x08 S 118-S00 S3 straight RPC-1.85 male - Mini-SMP male ≥ 30 dB @ DC to 12 GHz≥ 18 dB @ 12 GHz to 50 GHz≥ 15 dB @ 50 GHz to 65 GHz
1
x08 S 118-K00 S3 straight RPC-1.85 male - Mini-SMP female ≥ 30 dB @ DC to 12 GHz≥ 18 dB @ 12 GHz to 50 GHz≥ 15 dB @ 50 GHz to 65 GHz
1
x08 K 118-S00 S3 straight RPC-1.85 female - Mini-SMP male ≥ 30 dB @ DC to 12 GHz≥ 18 dB @ 12 GHz to 50 GHz≥ 15 dB @ 50 GHz to 65 GHz
1
x08 K 118-K00 S3 straight RPC-1.85 female - Mini-SMP female ≥ 30 dB @ DC to 12 GHz≥ 18 dB @ 12 GHz to 50 GHz≥ 15 dB @ 50 GHz to 65 GHz
1
x02 S 118-S00 S3 straight RPC-2.92 male - Mini-SMP male ≥ 30 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 20 GHz≥ 18 dB @ 20 GHz to 40 GHz
1
x02 S 118-K00 S3 straight RPC-2.92 male - Mini-SMP female ≥ 30 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 20 GHz≥ 18 dB @ 20 GHz to 40 GHz
1
x02 K 118-S00 S3 straight RPC-2.92 female - Mini-SMP male ≥ 30 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 20 GHz≥ 18 dB @ 20 GHz to 40 GHz
1
x02 K 118-K00 S3 straight RPC-2.92 female - Mini-SMP female ≥ 30 dB @ DC to 12 GHz≥ 26 dB @ 12 GHz to 20 GHz≥ 18 dB @ 20 GHz to 40 GHz
1
SW8 SW7
ø 8
24.5
SW8
22.4
SW7
ø 8
SW7
25.2
SW7
ø 8
SW7
23
SW7
ø 8
SW8
26.2
ø 9
SW7
ø 8
SW8 SW7
26.2
ø 9
ø 8
SW8 SW7
ø 8
ø 9
25.2
SW8
25.2
SW7
ø 9
ø 8
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com46
Mini-SMP
TerminationsMasterpage-Wechsel: Right or Left (1col)
Terminations
Termination Plug
xOrdering Number Remarks Return Loss Packing Unit
x18 S 15R-0.5 E3 0.5 WattFrequency: DC to 40 GHz
≥ 26.4 dB @ DC to 18 GHz≥ 17.7 dB @ 18 GHz to 26.5 GHz≥ 16.6 dB @ 26.5 GHz to 40 GHz
1
Termination Jack
xOrdering Number Remarks Return Loss Packing Unit
x18 K 15R-0.5 E3 0.5 WattFrequency: DC to 40 GHz
≥ 26.4 dB @ DC to 18 GHz≥ 17.7 dB @ 18 GHz to 26.5 GHz≥ 16.6 dB @ 26.5 GHz to 40 GHz
1
8.3
ø3.6
7.35
ø3.2
5
47Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
Mini-SMP
SM
PLo
ngw
ipe-
SM
PM
ini-
SM
P
ToolsMasterpage-Wechsel: Right or Left (1col)
Special Tools
Extraction Tool
xOrdering Number Remarks Packing Unit
x18 W 002-000 for Mini-SMP connectors 1ca. 120
Die Rosenberger-Serie FMC – Flexible Microstrip Connectors
– verfügt über extrem kleine Abmessungen und eignet sich
hervorragend für Leiterplattenanwendungen auf engstem
Raum. Durch Einsatz sogenannter Bullets sind sowohl radi-
aler als auch axialer Toleranzausgleich bei Board-to-Board-
Verbindungen möglich.
Im Vergleich zu SMP-Steckverbindern ist aufgrund des Inter-
face-Designs deutlich mehr Toleranzausgleich möglich - bei
gleichbleibenden elektrischen Eigenschaften über die gesamte
Länge der Steckverbindung.
PCB-Typen sind in Limited detent- und Smooth bore-Ausfüh-
rungen erhältlich. FMC-Steckverbinder werden in Blistergurt-
Verpackungen geliefert und sind für automatische Bestückung
bestens geeignet.
The extremely small FMC connector series – Flexible Microstrip
Connectors – are designed for PCB applications in the tightest
spaces. Using ‘bullets’, equalization of radial and axial misalign-
ments in board-to-board connections are possible.
Compared to SMP connectors, the innovative FMC interface design
allows significantly more misalignment whilst maintaining constant
electrical characteristics over the whole length of the connection.
PCB connectors are available as limited detent or smooth bore
types. FMC connectors are supplied in blister tapes, the optimum
packaging for automatic components placement.
Features
Interface according to Rosenberger FMC
Frequency range DC to 10 GHz
Return loss (cable connector straight) ≥ 23 dB (typ.)
Impedance 50 Ω
Minimum board-to-board distance ≥ 6.05 mm
Snap-on coupling
FMC
FM
C
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com50
FMC
4FMC
Interface Dimensions FMC Code 16
Features
FEMALEKuppler
MALEStecker
REFERENCE PLANE
Referenzebene
REFERENCE PLANE
Referenzebene
1) resilient, dimension to meet electrical and mechanical requirements
ø 2.
95
1)
Interface according to Rosenberger FMC Frequency range DC to 10 GHzReturn loss (cable connector straight) ≥ 23 dB (typ.)Impedance 50 Ω Minimum board-to-board distance ≥ 6.05 mmSnap-on coupling
Product RangeCable connectors PCB connectors (SMD versions)TerminationsAdaptors
Further connectors are available on request
51Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
FMC
FM
C
Technology
Technical Data FMC Code 16
Applicable standards | Anwendbare Normen
Interface according to | Interface gemäß Rosenberger FMC
Quality tested according to | Qualitätsprüfung gemäß MIL-STD-202
Electrical data | Elektrische Daten
Impedance | Wellenwiderstand 50 Ω
Frequency range | Frequenzbereich DC to 10 GHz
Return loss (cable connector straight) | Rückflussdämpfung (Kabelsteckverbinder gerade) ≥ 23 dB (typ.)
Insertion loss | Dämpfung ≤ 0.1 x √f (GHz) dB
Insulation resistance | Isolationswiderstand ≥ 5 GΩ
Center contact resistance | Übergangswiderstand Innenleiter ≤ 6 mΩ
Outer contact resistance | Übergangswiderstand Außenleiter ≤ 2 mΩ
Test voltage | Prüfspannung 500 V rms
Working voltage | Betriebsspannung 335 V rms
Contact current | Kontaktstrombelastbarkeit ≤ 1.2 A DC
RF-leakage | Schirmdämpfung ≥ 80 dB @ DC to 3 GHz≥ 65 dB @ 3 GHz to 10 GHzvalid for screened connection only
Mechanical data | Mechanische Daten
Mating cycles | Steckzyklen ≥ 100
Engagement force | Steckkraft Full detent: ≤ 68 NLimited detent: ≤ 45 NSmooth bore: ≤ 9 N
Disengagement force | Ziehkraft Full detent: ≥ 22 NLimited detent: ≥ 9 NSmooth bore: ≥ 2.2 N
Board-to-board distance (min.) | Board-to-Board Abstand (min.) 6.05 mm
Environmental data | Umweltdaten
Temperature range | Temperaturbereich -40 °C to +105 °C
Rapid change of temperature | Schneller Temperaturwechsel IEC 60169-1, Sub-clause 16.4
Damp heat | Feuchte Wärme IEC 60169-1, Sub-clause 16.3
Mixed flowing gas | Schadgas DIN EN 60068-2-60, Method 4
Vibration | Vibration IEC 61169-1, Sub-clause 9.3.3
Shock | Schock IEC 60169-1, Sub-clause 15.8
Max. soldering temperature (PCB connectors) | Max. Löttemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 °C for 10 sec.
Materials | Materialien
Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating
Center contact | Innenleiter CuBe / CuZn, Au plating
Outer contact | Außenleiter CuZn / CuBe, Au plating
Dielectric | Dielektrikum PTFE / LCP
Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particularproducts can be provided on request from your Rosenberger sales partner.
Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Datenangegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung können einzelne Werte von Steckverbindern hiervon abweichen. SpezifischeDatenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com52
FMC
Cable Connectors
PCB Connectors
Cable Connectors - Semi-Rigid Cables
Right Angle Plug, solder Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Packing Unit
x16 S 201-270 L5 a = 4.85 mm; b = 3.65 mm, c = 0.95 mm, d = 1.25 mm
70 16 A 100
x16 S 201-271 L5 a = 5.5 mm; b = 4.05 mm, c = 1.7 mm, d = 2.25 mm
71 16 A 100
PCB Connectors - SMD
Straight Jack planarwith spring contact
SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x16 P 101-40M L4 Limited detenta = 2.9 mm; b = 1.55 mm
B 191 VG 55.2M500 2500 tape & reel
x16 P 141-40M L4 Smooth borea = 2.9 mm; b = 1.55 mm
B 191 VG 55.2M500 2500 tape & reel
a
b
2.4
ø 4.9
ø 3.6
c
d
4.1
a
5.65
b5
ø 4.
2
1.2
0.8
53Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
FMC
FM
C
Adaptors
Adaptors
Bullet male-male
xOrdering Number Nominal Board-to-Board Distance1)
Bullet Length a2)
Bullet Length b2)
Minimum Board-to-Board Distance3)
Maximum Radial Tolerance4) 5)
Packing Unit
x16 S 101-S00 L5 6.35 mm 5.50 mm 3.89 mm 6.05 mm 0.24 mm 100
x16 S 102-S00 L5 10.35 mm 9.50 mm 7.89 mm 10.05 mm 0.49 mm 100
1) When standard FMC-connectors are applied (e.g. 16 P 101-40M, 16 P 141-40M).2) Bullets with special lengths on request.3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included.4) The maximum radial tolerance compensation is calculated by: sin(3.6°) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as
well as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection.5) The maximum radial tolerance is limited to 0.55 mm because of the limited guide in range of the second PCB connector.
Adaptors (Inter Series)
xOrdering Number Version Remarks Packing Unit
x16 S 132-S00 L5 straight FMC male - SMA male 1
x16 K 132-K00 S5 straight FMC female - SMA female 1
a
ø 3.
5
ø 2.
6
b
0.6
SW8
ø 9
23.55
SW8 SW8
21.35
SW 8 SW 8
ø9
MCX-Koaxial-Steckverbinder verfügen über eine Schnapp-
verbindung und sind konzipiert für HF-Verkabelungen im Fre-
quenzbereich bis 6 GHz, u.a. in Anwendungen in den Bereichen
Festnetz-Telekommunikation und Mobilfunkanlagen. Vorteile
von MCX-Steckverbindern sind hohe Zuverlässigkeit, lange
Lebensdauer sowie einfache und schnelle Montierbarkeit.
MCX-Steckverbinder in 75 Ω-Wellenwiderstand sind auf
Anfrage erhältlich.
MCX coaxial connectors, provided with a snap-on coupling mecha-
nism, are mainly applied in RF cable connections up to 6 GHz, e.g.
in fixed and wireless communication systems. MCX connectors are
characterized by high reliability, long service life, as well as easy
and fast mounting.
MCX connectors with 75 Ω characteristic impedance are available
on request.
Features
Interface according to IEC 61169-36, CECC 22220
Frequency range DC to 6 GHz
Return loss (cable connector straight) ≥ 20 dB (typ.)
Impedance 50 Ω
30% size reduction compared to SMB connectors
Snap-on coupling
MCX
MC
X
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com56
MCX, 50 Ω
5MCX, 50 Ω
Interface Dimensions MCX, 50 Ω Code 29
MCX, 50 Ω
REFERENCE PLANE
Referenzebene
REFERENCE PLANE
Referenzebene
FEMALEKuppler
MALEStecker
I
D
G
H
G
D
I
B HEA C F ECB F A
J
Male | Stecker Female | Kuppler
dimension [mm] min. max. min. max.
A 1) 1) 2)
B 3.05 nom. 1) 3.05 nom.
C 2.00 1.98
D 2.80 2.60 2.80
E 0.48 0.53
F 3.80 3) 3.60 3.75
G 4.15 2.30 2.80
H 0.15
I 0.00 0.30 4.00 4.12
J 2.80 3.20
1) contact diameters refer to 50 Ω 2) resilient, dimension to meet electrical and mechanical requirements3) when slotted
FeaturesInterface according to IEC 61169-36, CECC 22220Frequency range DC to 6 GHzReturn loss (cable connector straight) ≥ 20 dB (typ.)Impedance 50 Ω 30% size reduction compared to SMB connectorsSnap-on coupling
Product RangeCable connectors PCB connectors (solder, press-fit , SMD versions)TerminationsAdaptors
Further connectors are available on request
57Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
MCX, 50 Ω
MC
X
Technology
Technical Data MCX, 50 Ω Code 29
Applicable standards | Anwendbare Normen
Interface according to | Interface gemäß IEC 61169-36, CECC 22220
Quality tested according to | Qualitätsprüfung gemäß IEC 60068
Electrical data | Elektrische Daten
Impedance | Wellenwiderstand 50 Ω
Frequency range | Frequenzbereich DC to 6 GHz
Return loss (cable connector straight) | Rückflussdämpfung (Kabelsteckverbinder gerade) ≥ 20 dB (typ.)
Insertion loss | Dämpfung ≤ 0.1 x √f (GHz) dB
Insulation resistance | Isolationswiderstand ≥ 1 GΩ
Center contact resistance | Übergangswiderstand Innenleiter ≤ 5 mΩ
Outer contact resistance | Übergangswiderstand Außenleiter ≤ 2.5 mΩ
Test voltage | Prüfspannung 750 V rms
Working voltage | Betriebsspannung 335 V rms
Contact current | Kontaktstrombelastbarkeit ≤ 1.5 A DC
Mechanical data | Mechanische Daten
Mating cycles | Steckzyklen ≥ 500
Center contact captivation | Innenleiter Haltekraft axial: ≥ 10 N
Engagement force | Steckkraft ≤ 25 N
Disengagement force | Ziehkraft 8 N to 20 N
Environmental data | Umweltdaten
Temperature range | Temperaturbereich -55 °C to +155 °C
Thermal shock | Temperaturzyklen CECC 22220, Chapter 4.6.7
Corrosion resistance | Korrosionsbeständigkeit CECC 22220, Chapter 4.6.10
Moisture resistance | Feuchtigkeitsbeständigkeit CECC 22220, Chapter 4.6.6
Vibration | Vibration CECC 22220, Chapter 4.6.3
Max. soldering temperature (PCB connectors) | Max. Löttemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 °C for 10 sec.
Materials | Materialien
Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating
Center contact | Innenleiter CuZn, Au plating
Outer contact | Außenleiter CuZn, Au / white bronze plating
Crimping ferrule | Crimphülse Soft copper, Au / white bronze plating
Dielectric | Dielektrikum PTFE
Gasket | Dichtung Rubber
Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particularproducts can be provided on request from your Rosenberger sales partner.
Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Datenangegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung können einzelne Werte von Steckverbindern hiervon abweichen. SpezifischeDatenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com58
MCX, 50 Ω
Cable Connectors
Cable Connectors Semi-Rigid Cables
Straight Plug, solder Semi-Rigid Cables
xOrdering Number Cable Group Assembly Instruction Packing Unit
x29 S 111-270 L5 70 29 B 100
x29 S 111-271 L5 71 29 B 100
Right Angle Plug, solder Semi-Rigid Cables
xOrdering Number Cable Group Assembly Instruction Packing Unit
x29 S 211-270 L5 70 29 D2 100
x29 S 211-271 L5 71 29 D4 100
Cable Connectors - Flexible Cables
Straight Plug, crimp Flexible Cables
xOrdering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit
x29 S 111-101 L5 01 29 A 11 W 150-402 100
x29 S 111-102 L5 02 29 A 11 W 150-402 100
x29 S 111-103 L5 03 29 A 11 W 150-402 100
x29 S 111-103 N5 03 29 A 11 W 150-402 100
Right Angle Plug, solder-crimp Flexible Cables
xOrdering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit
x29 S 211-301 L5 01 29 C 11 W 150-102 100
x29 S 211-302 L5 02 29 C 11 W 150-102 100
x29 S 211-303 L5 03 29 C 11 W 150-102 100
x29 S 211-303 N5 03 29 C 11 W 150-102 100
Straight Jack, crimp Flexible Cables
xOrdering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit
x29 K 101-101 L5 01 29 A 11 W 150-402 1
x29 K 101-102 L5 02 29 A 11 W 150-402 1
x29 K 101-103 L5 03 29 A 11 W 150-402 1
Panel Jack, crimp, round flange Flexible Cables
xOrdering Number Cable Group Assembly Instruction
Panel Piercing / PCB Layout
Crimp Inserts Packing Unit
x29 K 501-103 N5 03 29 A B 22 11 W 150-402 1
11.2
ø 5
8.6
5
7
6.1
16.2
ø 5
8.6
5
12
6.1
16.8
ø 4.
8
16.8
ø 7.
3
10-5
6 U
NS
SW 6
59Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
MCX, 50 Ω
MC
X
Panel Connectors
Panel Connectors - Coaxial End
Panel Jack, round flange Coaxial End
xOrdering Number Panel Piercing / PCB Layout Packing Unit
x29 K 501-500 L5 B 22 100 blister8.7
ø 7.
3
10-5
6 U
NS
SW 6
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com60
MCX, 50 Ω
PCB Connectors
PCB Connectors - SMD
Straight Jack, PCB SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x29 K 101-40M L5 removable plastic cap on suction area B 30 VG 34.75000 100 blister, 750 tape & reel
Right Angle Jack, PCB SMD
xOrdering Number Panel Piercing / PCB Layout Packing Unit
x29 K 203-40M L5 B 173 100 blister
Straight/Right Angle Jack, PCB SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x29 K 10A-40M L5 application as straight typeremovable plastic cap on suction area
B 205a VG 04.50000 500 tape & reel
x29 K 201-40M L5 application as right angle typewithout removable plastic cap on suction area
B 205 VG 12.1M500 100 blister, 1500 tape & reel
5.9
6
5.4
ø 5
0.3
SW 56.7
9.3
6.5
5
ø 4.
8
61Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
MCX, 50 Ω
MC
X
PCB Connectors
PCB Connectors - Solder Pin
Straight Plug, PCB Solder Pin
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x29 S 103-400 L5 round pins B 30 100 blister
Straight Jack, PCB Solder Pin
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x29 K 101-400 L5 without stand-off B 30 300
x29 K 102-400 L5 stand-off version B 30 300
x29 K 104-400 L5 B 35 100 blister
Right Angle Jack, PCB Solder Pin
xOrdering Number Panel Piercing / PCB Layout Packing Unit
x29 K 203-400 L5 B 30 100 blister
PCB Connectors - Press-fit
Straight Jack, PCB Press-fit
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x29 K 102-40P L5 a = 4.3 mm b= 10.8 mm B 79 100 blister
x29 K 105-40P L5 a = 2.8 mm; b = 9.3 mm B 79 100 blister
9.5
6.35
5.5
10
6
ø 5
6
10
6
6.3
ø 5
0.3
9
ø 4.
4
6
ø 5
9.5
4
ø 4.
5
6.5
7 10
b
ø 5
a
6.5
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com62
MCX, 50 Ω
Adaptors
Adaptors
Bullet male-male
xOrdering Number Version Remarks Packing Unit
x29 S 101-S00 E3 straight MCX male - male 1
Adaptors (Inter Series)
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Unit
x29 S 132-K01 N5 straightpanel
MCX male - SMA female B 56 1
x29 S 153-S00 Z5 straight MCX male - N male 1
x29 S 153-K00 Z5 straight MCX male - N female 1
x29 K 153-S00 Z5 straight MCX female - N male 1
x29 K 153-K00 Z5 straight MCX female - N female 1
18.5
ø 5
34.7
SW8
ø 8
SW8
14.4
26
29
ø 16
27
29
ø 16
63Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
MCX, 50 Ω
MC
X
Terminations
x29 K 551-K00 A5 straightpanel
MCX female - BNC 50 Ω femaleround flange
B 2 1
x29 K 571-K00 N5 straightpanel
MCX female - BNC 75 Ω femaleround flange
B 1 1
x29 K 556-K00 A5 straightpanel
MCX female - TNC 50 Ω femaleround flange
B 2 1
Terminations
Termination Plug
xOrdering Number Remarks Return Loss Packing Unit
x29 S 15R-1.0 E3 1 WattFrequency: DC to 6 GHz
≥ 23.1 dB @ DC to 4 GHz≥ 17.7 dB @ 4 GHz to 6 GHz
1
Termination Jack
xOrdering Number Remarks Return Loss Packing Unit
x29 K 15R-1.0 E3 1 WattFrequency: DC to 6 GHz
≥ 23.1 dB @ DC to 4 GHz≥ 17.7 dB @ 4 GHz to 6 GHz
1
MCX connectors in 75 Ω version are avialable on request.
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Unit
23
ø 14
.8
SW 13
9.5
19
ø 12
.5
SW 13
7
23
ø 14
.8
SW 13
9.5
11.5 max.
ø 5
11.5 max.
ø 5
P-SMP-Koaxial-Steckverbinder von Rosenberger verbinden
die Vorteile der Serien SMP – geringstmögliche Leiterplatten-
abstände – und SMA – hohe Leistung – miteinander. Durch
Verwendung von Bullets sind minimale Leiterplattenabstände
ab 12,6 mm möglich, gleichzeitig sind P-SMP-Steckverbinder
bei hohen Leistungen bis in einen hohen Frequenzbereich bis
10 GHz belastbar.
Die Serie P-SMP - Power SMP - ist konzipiert für Anwen-
dungen, bei denen Dauerleistungen bis 200 W @ 2.2 GHz
gefordert sind, z. B. Board-to-Board-Steckverbindungen in
Basisstationen oder Übergänge von Leiterplatte auf Kabel in
Leistungsverstärker-Filterverbindungen.
PCB-Typen – SMD- und Pin-in-paste-Bauformen – sind als
Limited detent- und Smooth bore-Ausführungen erhältlich.
P-SMP coaxial connectors from Rosenberger combine the ad-
vantages of SMP connectors – minimum board-to-board spaces
– and of SMA connectors – high performance and high power
rating. Minimum board-to-board distances from 12.6 mm can be
realized by using bullets of different lengths, yet P-SMP connectors
are designed for high power loads and operate at frequencies up
to 10 GHz.
P-SMP – Power SMP – RF coaxial connectors have been designed
for applications up to 200 W @ 2.2 GHz continuous power, e.g.
board-to-board connections in base stations, or board-to-cable
connections in power amplifier filter units.
PCB connectors – SMD and also pin-in-paste types - are available
as limited detent or smooth bore types.
Features
Interface according to Rosenberger P-SMP series
Frequency range DC to 10 GHz
Return loss (cable connector straight) ≥ 32 dB (typ.)
Power handling (continuous) 200 W @ 2.2. GHz
Impedance 50 Ω
Minimum board-to-board distance ≥ 12.6 mm
Axial misalignment ± 1 mm
Radial misalignment 4°
Snap-on coupling
P-SMP
P-S
MP
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com66
P-SMP
6P- SMP
Interface Dimensions P-SMP Code 119
P-SMP
MALE
Stecker
FEMALEKuppler
REFERENCE PLANE
Referenzebene
REFERENCE PLANE
D
D
Referenzebene
Male | Stecker Female | Kuppler
Smooth bore Limited detent
dimension [mm] min. max. min. max. min. max.
D 2.90 3.16 2.90 3.16 0.00 0.20
FeaturesInterface according to Rosenberger P-SMP seriesFrequency range DC to 10 GHzReturn loss (cable connector straight) ≥ 32 dB (typ.)Power handling (continuous) 200 W @ 2.2. GHzImpedance 50 Ω Minimum board-to-board distance ≥ 12.6 mmAxial misalignment ± 1 mmRadial misalignment 4°Snap-on coupling
Product RangeCable connectorsPanel connectorsPCB connectors (SMD versions)Adaptors
Further connectors available on request
67Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
P-SMP
P-S
MP
Technology
Technical Data P-SMP Code 119
Applicable standards | Anwendbare Normen
Interface according to | Interface gemäß Rosenberger P-SMP
Quality tested according to | Qualitätsprüfung gemäß MIL-STD-202
Electrical data | Elektrische Daten
Impedance | Wellenwiderstand 50 Ω
Frequency range | Frequenzbereich DC to 10 GHz
Return loss (cable connector straight) | Rückflussdämpfung (Kabelsteckverbinder gerade) ≥ 32 dB @ DC to 3 GHz≥ 26 dB @ 3 GHz to 6 GHz
Insertion loss | Dämpfung ≤ 0.03 x √f (GHz) dB
Insulation resistance | Isolationswiderstand ≥ 5 GΩ
Center contact resistance | Übergangswiderstand Innenleiter ≤ 3 mΩ
Outer contact resistance | Übergangswiderstand Außenleiter ≤ 2 mΩ
Test voltage | Prüfspannung 1000 V rms
Working voltage | Betriebsspannung 480 V rms
Power handling | Leistungsbelastbarkeit 200 W @ 2.2 GHz
Contact current | Kontaktstrombelastbarkeit ≤ 1.2 A DC
RF leakage | Schirmdämpfung ≥ 70 dB @ DC to 1 GHz
Intermodulation 3rd order | Intermodulation 3. Ordnung ≥ 160 dBc (2 x 43 dBm)
Mechanical data | Mechanische Daten
Mating cycles | Steckzyklen Full detent: ≥ 100Limited detent: ≥ 500Smooth bore, Catchers mitt: ≥ 1000
Center contact captivation | Innenleiter Haltekraft axial: ≥ 7 N
Engagement force | Steckkraft Full detent: ≤ 68 NLimited detent: ≤ 45 NSmooth bore, Catchers mitt: ≤ 10 N
Disengagement force | Ziehkraft Full detent: ≥ 25 NLimited detent: ≥ 15 NSmooth bore, Catchers mitt: ≥ 2.2 N
Board-to-board distance (min.) | Board-to-Board Abstand (min.) 12.6 mm
Environmental data | Umweltdaten
Temperature range | Temperaturbereich -65 °C to +165 °C
Thermal shock | Temperaturzyklen MIL-STD-202, Method 107, Condition B
Corrosion resistance | Korrosionsbeständigkeit MIL-STD-202, Method 101, Condition B
Moisture resistance | Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106
Vibration | Vibration MIL-STD-202, Method 204, Condition B
Max. soldering temperature (PCB connectors) | Maximale Löttemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 °C for 10 sec.
Materials | Materialien
Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating
Center contact | Innenleiter CuZn, Au plating
Outer contact | Außenleiter CuZn, Au / white bronze plating
Crimping ferrule | Crimphülse Copper alloy, Au / white bronze plating
Dielectric | Dielektrikum PTFE / PEEK / LCP
Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particularproducts can be provided on request from your Rosenberger sales partner.
Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Datenangegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung können einzelne Werte von Steckverbindern hiervon abweichen. SpezifischeDatenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com68
P-SMP
Cable Connectors - Semi-Rigid Cables
Straight Jack, solder Semi-Rigid Cables
xOrdering Number Cable Group Assembly Instruction Packing Unit
x119 K 101-272 N5 72 19 E4 100
Right Angle Jack, solder Semi-Rigid Cables
xOrdering Number Cable Group Assembly Instruction Packing Unit
x119 K 207-271 N5 71 119 C 100
x119 K 207-272 N5 72 119 C 100
Cable Connectors - Flexible Cables
Right Angle Jack, solder crimp Flexible Cables
xOrdering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit
x119 K 207-3Y8 N5 Y8 119 B 11 W 150-109 100
15
ø 7.
5
12.3
ø 7.
5
9.75
13.6
ø 7.
5
10.45
10.85
16.2
5
69Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
P-SMP
P-S
MP
Panel Connectors
Panel Connectors - Coaxial End
Panel Plug, hexagonal flange Coaxial End
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x119 S 601-500 N5 Limited detentPanel feed through
M 7 x 0.75 100 blister
x119 S 641-500 N5 Smooth borePanel feed through
M 7 x 0.75 100 blister
4.2
ø 1.
27
7.4
SW 8
1.5
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com70
P-SMP
PCB Connectors
PCB Connectors - SMD
Straight Plug, PCB SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x119 S 101-40M L5 Limited detent B 126a 100 blistertape & reel on request
x119 S 141-40M L5 Smooth bore B 126a 100 blistertape & reel on request
x119 S 104-40M L5 Limited detent B 120b VG 163.01M00 100 blister1000 tape & reel
x119 S 144-40M L5 Smooth bore B 120b VG 163.01M00 100 blister1000 tape & reel
x119 S 146-40M L5 Smooth bore B 126a 100 blistertape & reel on request
x119 S 147-40M L5 Smooth bore B 120b 100 blistertape & reel on request
x119 S 102-40M L5 Limited detentPin-in-paste
B 126b 100 blistertape & reel on request
x119 S 142-40M L5 Smooth borePin-in-paste
B 126b 100 blistertape & reel on request
x119 S 103-40M L5 Limited detentPin-in-paste
B 120c 100 blistertape & reel on request
x119 S 143-40M L5 Smooth borePin-in-paste
B 120c 100 blistertape & reel on request
Right Angle Plug, PCB SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x119 S 202-40M L5 Limited detenta = 7.5 mm
B 125d VG 170.02M00 100 blister2000 tape & reel
x119 S 242-40M L5 Smooth borea = 8.5 mm
B 125e 100 blistertape & reel on request
x119 S 203-40M L5 Limited detent B 178b 100 blistertape & reel on request
x119 S 201-40M L5 Limited detent B 179 VG 51.25000 250 tape & reel
5.57
5.57
7
6.25
7
6.25
1
7 5.5
7
15.
5
a
6
5.5
3
9
8.65
11.5
5
15.55
13.5
7.5
19.4
1.55
3
2.1
71Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
P-SMP
P-S
MP
Adaptors
Adaptors
Bullet female-female
xOrdering Number Nominal Board-to-Board Distance1)
Bullet Length2) Minimum Board-to-Board Distance3)
Maximum Radial Tolerance4)
Packing Unit
x119 K 101-K00 N5 13.65 mm a=10.00 mm 12.66 mm 0.70 mm 100
x119 K 106-K00 N5 24.30 mm a=20.65 mm 23.31 mm 5) 100
x119 K 107-K00 N5 27.45 mm a=23.80 mm 26.46 mm 5) 100
x119 K 108-K00 N5 34.88 mm a=31.20 mm 33.94 mm 5) 100
x119 K 104-K00 N5 37.58 mm a=33.90 mm 36.64 mm 5) 100
1) When standard SMD-connectors are applied (e.g. 119 S 101-400, 119 S 142-40M, ...).2) Bullets with special lengths on request.3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included.4) The maximum radial tolerance compensation is calculated by: sin(4°) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well
as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection.5) The maximum radial tolerance is limited to the second PCB connector and can vary between 1.3 mm and 2.1 mm.
Adaptors (Inter Series)
xOrdering Number Version Remarks
x119 S 132-S00 S5 straight P-SMP male - SMA male
x119 S 132-K00 S5 straight P-SMP male - SMA female
x119 K 132-S00 L5 straight P-SMP female - SMA male
x119 K 132-K00 L5 straight P-SMP female - SMA female
x119 K 153-K00 L5 straight P-SMP female - N female
a
ø 4.
5
SW8SW8
ø 9
23.2
22.3
ø 9
SW8
23.2ø
9
SW8SW8
22.3
ø 9
SW8
27.5
ø 16
SMA-Koaxial-Steckverbinder sind qualitativ hochwertige
Schraubsteckverbinder mit definiertem Anzugsdrehmoment
und zeichnen sich aus durch höchstmögliche Zuverlässig-
keit, hohe mechanische Stabilität, lange Lebensdauer und
hervorragende elektrische Eigenschaften, insbesondere hohe
Rückflussdämpfung. SMA-Steckverbinder sind bis in einen
Frequenzbereich bis 18 GHz äußerst vielseitig einsetzbar,
z. B. in der Telekommunikation, im Mobilfunk oder in der
industriellen Messtechnik.
Rosenberger bietet die SMA-Außenleiterteile in folgenden
Materialien an:
CuBe, vergoldet –
Edelstahl, passiviert –
CuZn, vergoldet –
SMA coaxial connectors are high quality screw-on coupling con-
nectors with defined maximum torque and feature high reliability,
long service life, high mechanical stability and excellent electrical
characteristics, in particular high return loss. SMA connectors
can be applied in various RF applications up to 18 GHz, e.g. tele-
communication and mobile communication, test & measurement
equipment and instruments.
Rosenberger provides outer contact parts in the following
materials:
CuBe, Au plating –
Stainless steel, passivated –
CuZn, Au plating –
Features
Interface according to IEC 60169-15, EN 122110, MIL-STD-348A, Fig.310
Frequency range DC to 18 GHz
Return loss (cable connector straight) ≥ 30 dB (typ.)
Impedance 50 Ω
Screw-on coupling
SMA
SM
A
Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com74
SMA
7SMA
Interface Dimensions SMA Code 32
SMA
REFERENCE PLANE
Referenzebene
REFERENCE PLANE
Referenzebene
MALE
SteckerFEMALEKuppler
A C BFFC
E
D
G
D
H
I
I
AEK BG
H
Male | Stecker Female | Kuppler
dimension [mm] min. max. min. max.
A 1.245 1.295 1.245 1.295 1) 2)
B 4.178 4.178 1)
C 4.59 4.60 4.67
D 2.54 1.88 1.98
E 0.902 0.940 5.28 5.49
F 1/4-36 UNS-2B 1/4-36 UNS-2A
G 3.43 4.32
H +0.05 -0.18 0.05
I 0.00 0.00 0.41
K hex 8
1) contact diameters refer to 50 Ω 2) resilient, dimension to meet electrical and mechanical requirements
FeaturesInterface according to IEC 60169-15, EN 122110, MIL-STD-348A, Fig. 310Frequency range DC to 18 GHzReturn loss (cable connector straight) ≥ 30 dB (typ.)Impedance 50 Ω Screw-on coupling
Product RangeCable connectorsPCB connectors (SMD, solder, press-fit, edge mount versions)Panel connectors (solder, stripline and microstrip types)Hermetically sealed versionsAdaptorsTerminationsTools and Accessories
Further connectors available on request
75Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Technology
Technical Data SMA Code 32
Applicable standards | Anwendbare Normen
Interface according to | Interface gemäß IEC 60169-15, EN 122110, MIL-STD-348A, Fig. 310
Quality tested according to | Qualitätsprüfung gemäß MIL-STD-202
Electrical data | Elektrische Daten
Impedance | Wellenwiderstand 50 Ω
Frequency range | Frequenzbereich DC to 18 GHz
Return loss (cable connector straight) | Rückflussdämpfung (Kabelsteckverbinder gerade) ≥ 30 dB (typ.)
Insertion loss | Dämpfung ≤ 0.04 x √f (GHz) dB
Insulation resistance | Isolationswiderstand ≥ 5 GΩ
Center contact resistance | Übergangswiderstand Innenleiter ≤ 3 mΩ
Outer contact resistance | Übergangswiderstand Außenleiter ≤ 2 mΩ
Test voltage | Prüfspannung 1000 V rms
Working voltage | Betriebsspannung 480 V rms
Power handling | Leistungsbelastbarkeit 200 W @ 2.2 GHz
Rf-leakage | Schirmdämpfung ≥ 100 dB @ DC to 1 GHz
Mechanical data | Mechanische Daten
Mating cycles | Steckzyklen CuBe / stainless steel: ≥ 500CuZn: ≥ 100
Coupling nut retention | Überwurfmutter Haltekraft CuBe / stainless steel: ≥ 270 NCuZn: ≥ 180 N
Center contact captivation | Innenleiter Haltekraft CuBe / stainless steel: axial: ≥ 27 N, radial: ≥ 3 NcmCuZn: axial: ≥ 20 N, radial: ≥ 1 Ncm
Coupling test torque | Prüfdrehmoment CuBe / stainless steel: ≤ 1.7 NmCuZn: ≤ 0.6 Nm
Coupling torque recommended | Drehmoment empfohlen CuBe / stainless steel: 0.8 Nm to 1.1 NmCuZn: 0.5 Nm
Environmental data | Umweltdaten
Temperature range | Temperaturbereich -65 °C to +165 °C
Thermal shock | Temperaturzyklen MIL-STD-202, Method 107, Condition B
Climatic category | Klimakategorie IEC 60068 65/165/21
Corrosion resistance | Korrosionsbeständigkeit MIL-STD-202, Method 101, Condition B
Moisture resistance | Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106
Vibration | Vibration MIL-STD-202, Method 204, Condition D
Shock | Schock MIL-STD-202, Method 213, Condition I
Max. soldering temperature (PCB connectors) | Max. Löttemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 °C for 10 sec.
Materials | Materialien
Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating
Center contact | Innenleiter CuZn, Au plating
Outer contact | Außenleiter CuBe or equivalent, Au plating Stainless steel, passivated CuZn, Au / white bronze plating
Body | Gehäuse CuZn, Au / white bronze plating
Coupling nut | Überwurfmutter Stainless steel, passivated / Au platingCuZn, Au / white bronze plating
Crimping ferrule | Crimphülse Soft copper, white bronze plating
Dielectric | Dielektrikum PTFE
Gasket | Dichtung Silicon / Rubber
Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particularproducts can be provided on request from your Rosenberger sales partner.
Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Datenangegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung können einzelne Werte von Steckverbindern hiervon abweichen. SpezifischeDatenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com76
SMA
Cable Connectors
Cable Connectors Semi-Rigid Cables
Straight Plug, solder without pin, without dielectric
Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Packing Unit
x32 S 101-272 L CuBe or equivalent, Au platinga = 8.3 mm
72 32 A39 100
x32 S 121-272 S Outer Contact: CuBe or equivalent, Au platingCoupling Nut: stainless steel, passivateda = 8.3 mm
72 32 A39 100
Straight Plug, solder soldered center contact
Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Packing Unit
x32 S 101-270 L5 CuBe or equivalent, Au plating 70 32 A11 1
x32 S 102-271 L5 CuBe or equivalent, Au platinga = 11.2 mmMIL-PRF 39012: 79-4005
71 32 A20 300
x32 S 122-271 S5 Outer Contact: CuBe or equivalent, Au platingCoupling Nut: stainless steel, passivateda = 11.2 mmMIL-PRF 39012: 79-3005
71 32 A20 300
x32 S 142-271 L5 CuZn, Au platinga = 11.2 mm
71 32 A20 300
x32 S 102-272 L5 CuBe or equivalent, Au platinga = 11.2 mmMIL-PRF 39012: 79-4006
72 32 A23 300
x32 S 122-272 S5 Outer Contact: CuBe or equivalent, Au platingCoupling Nut: stainless steel, passivateda = 11.2 mmMIL-PRF 39012: 79-3006
72 32 A23 300
x32 S 142-272 L5 CuZn, Au platinga = 11.2 mm
72 32 A23 300
Straight Plug, clamp Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction Packing Unit
x32 S 106-073 L5 CuBe or equivalent, Au plating 73 32 C1 1
Right Angle Plug, solder Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Packing Unit
x32 S 206-271 L5 CuBe or equivalent, Au plating 71 32 E21 100
x32 S 246-271 L5 CuZn, Au plating 71 32 E21 100
x32 S 206-272 L5 CuBe or equivalent, Au plating 72 32 E20 100
x32 S 246-272 F5 CuZn, Au plating 72 32 E20 100
a
16.8
ø 3.
7
SW 8 SW 7 SW 6
8
SW 8
a
SW 8 SW 11
25
SW 8
13
SW 8
7.9
77Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Straight Jack, solder Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Packing Unit
x32 K 101-271 L5 CuBe or equivalent, Au platingMIL-PRF 39012: 81-4005
71 32 A21 100
x32 K 101-272 L5 CuBe or equivalent, Au platingMIL-PRF 39012: 81-4006
72 32 A26 100
Panel Jack, solder, 4-hole flange Semi-Rigid Cables
xOrdering Number Remarks Cable Group Assembly Instruction
Panel Piercing / PCB Layout
Packing Unit
x32 K 401-271 L5 CuBe or equivalent, Au platingMIL-PRF 39012: 82-4005
71 32 A21 B 55 100 blister
x32 K 401-272 L5 CuBe or equivalent, Au platingMIL-PRF 39012: 82-4006
72 32 A26 B 55 1
Panel Jack, solder, hexagonal flange Semi-Rigid Cables
xOrdering Number Version Remarks Cable Group
Assembly Instruction
Panel Piercing / PCB Layout
Packing Unit
x32 K 601-271 L5 rear mount CuBe or equivalent, Au platinga = 15 mmMIL-PRF 39012: 83-4005
71 32 A21 B 56 1, 100
x32 K 601-272 L5 rear mount CuBe or equivalent, Au platinga = 15 mmMIL-PRF 39012: 83-4006
72 32 A26 B 56 1, 100
13.9
ø 8
SW 6.35
14.2
1.6
9.5
12.7
ø 7
a
SW 8 SW 11
10.5
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com78
SMA
Cable Connectors - Flexible Cables
Straight Plug, solder-crimp Flexible Cables
xOrdering Number
Remarks Cable Group
Assembly Instruction
Crimp Inserts Packing Unit
x32 S 107-302 L5 CuBe or equivalent, Au platinga = 18.0 mm; b = 7.0 mm
02 32 B5 11 W 150-102 100
x32 S 127-302 S5 stainless steel, passivateda = 18.0 mm; b = 7.0 mm
02 32 B5 11 W 150-102 100
x32 S 147-302 L5 CuZn, Au platinga = 18.0 mm; b = 7.0 mm
02 32 B5 11 W 150-102 100
x32 S 147-302 N5 CuZn, white bronze platinga = 18.0 mm; b = 7.0 mm
02 32 B5 11 W 150-102 100
x32 S 107-303 L5 CuBe or equivalent, Au platinga = 18.0 mm; b = 7.0 mm
03 32 B5 11 W 150-102 100
x32 S 127-303 S5 stainless steel, passivateda = 18.0 mm; b = 7.0 mm
03 32 B5 11 W 150-102 100
x32 S 147-303 L5 CuZn, Au platinga = 18.0 mm; b = 7.0 mm
03 32 B5 11 W 150-102 100
x32 S 147-303 N5 CuZn, white bronze platinga = 18.0 mm; b = 7.0 mm
03 32 B5 11 W 150-102 100
x32 S 107-306 L5 CuBe or equivalent, Au platinga = 24.4 mm; b = 13.5 mm
06 32 B8 11 W 150-108 100
x32 S 127-306 S5 stainless steel, passivateda = 24.4 mm; b = 13.5 mm
06 32 B8 11 W 150-108 100
x32 S 147-306 L5 CuZn, Au platinga = 24.4 mm; b = 13.5 mm
06 32 B8 11 W 150-108 100
x32 S 147-306 N5 CuZn, white bronze platinga = 24.4 mm; b = 13.5 mm
06 32 B8 11 W 150-108 100
x32 S 107-307 L5 CuBe or equivalent, Au platinga = 24.4 mm; b = 13.5 mm
07, 08 32 B8 11 W 150-108 100
x32 S 127-307 S5 stainless steel, passivateda = 24.4 mm; b = 13.5 mm
07, 08 32 B8 11 W 150-108 100
x32 S 147-307 L5 CuZn, Au platinga = 24.4 mm; b = 13.5 mm
07, 08 32 B8 11 W 150-108 100
x32 S 147-307 N5 CuZn, white bronze platinga = 24.4 mm; b = 13.5 mm
07, 08 32 B8 11 W 150-108 100
Right Angle Plug, solder-crimp Flexible Cables
xOrdering Number
Remarks Cable Group
Assembly Instruction
Crimp Inserts Packing Unit
x32 S 207-302 L5 CuBe or equivalent, Au platinga = 12.1 mm; b = 7.0 mm
02 32 B6 11 W 150-102 100
x32 S 247-302 L5 CuZn, Au platinga = 12.1 mm; b = 7.0 mm
02 32 B6 11 W 150-102 100
x32 S 247-302 N5 CuZn, white bronze platinga = 12.1 mm; b = 7.0 mm
02 32 B6 11 W 150-102 100
x32 S 207-303 L5 CuBe or equivalent, Au platinga = 12.1 mm; b = 7.0 mm
03 32 B6 11 W 150-102 100
x32 S 247-303 L5 CuZn, Au platinga = 12.1 mm; b = 7.0 mm
03 32 B6 11 W 150-102 100
x32 S 247-303 N5 CuZn, white bronze platinga = 12.1 mm; b = 7.0 mm
03 32 B6 11 W 150-102 100
x32 S 207-306 L5 CuBe or equivalent, Au platinga = 18.5 mm; b = 13.5 mm
06 32 B9 11 W 150-108 100
x32 S 247-306 L5 CuZn, Au platinga = 18.5 mm; b = 13.5 mm
06 32 B9 11 W 150-108 100
x32 S 247-306 N5 CuZn, white bronze platinga = 18.5 mm; b = 13.5 mm
06 32 B9 11 W 150-108 100
x32 S 207-307 L5 CuBe or equivalent, Au platinga = 18.5 mm; b = 13.5 mm
07, 08 32 B9 11 W 150-108 100
x32 S 247-307 L5 CuZn, Au platinga = 18.5 mm; b = 13.5 mm
07, 08 32 B9 11 W 150-108 100
x32 S 247-307 N5 CuZn, white bronze platinga = 18.5 mm; b = 13.5 mm
07, 08 32 B9 11 W 150-108 100
a
SW 8
b
13.1
SW 8
b a
79Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Straight Jack, solder-crimp Flexible Cables
xOrdering Number Remarks Cable Group
Assembly Instruction
Crimp Inserts Packing Unit
x32 K 107-302 L5 CuBe or equivalent, Au platinga = 20.0 mm; b = 7.0 mm
02 32 B21 11 W 150-102 100
x32 K 107-303 L5 CuBe or equivalent, Au platinga = 20.0 mm; b = 7.0 mm
03 32 B21 11 W 150-102 100
x32 K 107-306 L5 CuBe or equivalent, Au platinga = 25.5 mm; b = 13.5 mm
06 32 B8 11 W 150-108 1
x32 K 107-307 L5 CuBe or equivalent, Au platinga = 25.5 mm; b = 13.5 mm
07, 08 32 B8 11 W 150-108 100
Panel Jack, solder-crimp, 4-hole flange Flexible Cables
xOrdering Number Remarks Cable Group
Assembly Instruction
Panel Piercing / PCB Layout
Crimp Inserts Packing Unit
x32 K 407-302 L5 CuBe or equivalent, Au platinga = 20.0 mm; b = 7.0 mm
02 32 B21 B 55 11 W 150-102 100
x32 K 407-303 L5 CuBe or equivalent, Au platinga = 20.0 mm; b = 7.0 mm
03 32 B21 B 55 11 W 150-102 100
x32 K 407-306 L5 CuBe or equivalent, Au platinga = 25.5 mm; b = 13.5 mm
06 32 B8 B 55 11 W 150-108 100
x32 K 407-307 L5 CuBe or equivalent, Au platinga = 25.5 mm; b = 13.5 mm
07, 08 32 B8 B 55 11 W 150-108 100
Panel Jack, solder-crimp, hexagonal flange Flexible Cables
xOrdering Number Version Remarks Cable Group
Assembly Instruction
Panel Piercing / PCB Layout
Crimp Inserts Packing Unit
x32 K 607-302 L5 rear mount CuBe or equiva-lent, Au platinga = 20.0 mm; b = 7.0 mm
02 32 B21 B 57 11 W 150-102 100
x32 K 647-302 N5 rear mount CuZn, white bronze platinga = 20.0 mm; b = 7.0 mm
02 32 B21 B 57 11 W 150-102 100
x32 K 607-303 L5 rear mount CuBe or equiva-lent, Au platinga = 20.0 mm; b = 7.0 mm
03 32 B21 B 57 11 W 150-102 100
x32 K 647-303 N5 rear mount CuZn, white bronze platinga = 20.0 mm; b = 7.0 mm
03 32 B21 B 57 11 W 150-102 100
x32 K 607-306 L5 rear mount CuBe or equiva-lent, Au platinga = 26.5 mm; b = 13.5 mm
06 32 B8 B 57 11 W 150-108 1
x32 K 607-307 L5 rear mount CuBe or equiva-lent, Au platinga = 26.5 mm; b = 13.5 mm
07, 08 32 B8 B 57 11 W 150-108 1
a
ø 8
b
b1.6
9.5
12.7
a
11
SW 8 SW 11
a
b
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com80
SMA
Panel Connectors
Panel Connectors - Solder End
Panel Plug, 4-hole flange Solder End
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 S 421-200 S3 stainless steel, passivated B 55a 100 blister
Panel Jack, 4-hole flange Solder End
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 K 421-200 E3 stainless steel, Au platingMIL-PRF 39012: 60-3001
B 55a 100 blister
x32 K 40A-200 E3 stainless steel, Au plating B 55a 100 blister
x32 K 441-200 N5 CuZn, white bronze plating B 55a 100 blister
Right Angle Panel Jack, 4-hole flange Solder End
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 K 221-200 S5 stainless steel, passivated B 55a 50 blister
x32 K 241-200 L5 CuZn, Au plating B 55a 100 blister
Panel Jack, 2-hole flange Solder End
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 K 701-200 E3 stainless steel, Au platingMIL-PRF 39012: 60-4002
B 55h 100 blister
x32 K 721-200 S5 stainless steel, passivatedMIL-PRF 39012: 60-3002
B 55h 100 blister
x32 K 741-200 N5 CuZn, white bronze plating B 55h 100 blister
12.6
17.6
1.6
12.7
SW 8
9.514.6
1.6
12.7
11.6
14.2
12.7
1.5
9.7
1/4-
36U
NS
-2A
9.514.6
1.6
16
81Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Panel Jack, hexagonal flange Solder End
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 603-200 L5 rear mount CuBe or equivalent, Au platinga = 1.6 mm
B 56 100
x32 K 622-200 S5 front mount stainless steel, passivatedMIL-PRF 39012: 61-3002
B 56 1
Panel Connectors - Coaxial End
Panel Plug Straight Terminal4-hole flange
Coaxial End
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 S 422-500 S5 stainless steel, passivated B 55a 1
Panel Plug Straight Terminal2-hole flange
Coaxial End
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 S 722-500 S5 stainless steel, passivated B 55a 1
Panel Plug, solder mount Coaxial End
xOrdering Number Version Remarks Packing Unit
x32 S 102-5H0 L5 hermetic sealed Outer Contact: CuSn, Au platingCoupling Nut: stainless steel, Au platingsealed with a glass feedthru matched to 50 Ω Leakage rate < 10-6 cc/sec.Pressure max. 2 N/mm2
a = 2.4 mm
100 blister
a
SW 8 SW 8
11.4
17
SW 8 SW 8
7.1
17
30.5
1.6
SW 8 12.6 15
12.7
30.5
1.6
SW 8 12.6 15
16
a
ø 0.
5
2.9
16.5
ø 5.
3
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com82
SMA
Panel Jack, spark plug Coaxial End
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 101-5H0 L5 hermetic sealed CuBe or equivalent, Au platingsealed with a glass feedthru matched to 50Ω Leakage rate < 10-6 cc/sec.Pressure max. 2 N/mm2
1/4-36 UNS-2A 1
Panel Jack, solder mount Coaxial End
xOrdering Number Version Remarks Packing Unit
x32 K 103-5H0 L5 hermetic sealed CuBe or equivalent, Au platingsealed with a glass feedthru matched to 50 Ω Leakage rate < 10-6 cc/sec.Pressure max. 2 N/mm2
a = 3.2 mm
100 blister
Panel Jack Straight Terminal Coaxial End
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 141-500 L5 CuZn, Au plating 1/4-36 UNS-2A 100
x32 K 141-500 N5 CuZn, white bronze plating 1/4-36 UNS-2A 100
Panel Jack Straight Terminalhexagonal flange
Coaxial End
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 644-500 L5 CuZn, Au plating 1/4-36 UNS-2A 100 blister
12.7
ø 0.
5
SW 8
15.6
2.9
12.8
a
ø 5.
2
ø 0.
5
16.8
SW 8
12.7 1.6
SW 5.3
15
SW 8
83Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Panel Jack Straight Terminal4-hole flange
Coaxial End
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 441-500 L5 CuZn, Au plating B 55h 100 blister
x32 K 402-500 E3 stainless steel, Au platingcaptivated center contact
B 55a 50 blister
x32 K 422-500 S5 stainless steel, passivatedcaptivated center contact
B 55a 50 blister
x32 K 449-500 L5 CuZn, Au plating B 55a 50 blister
x32 K 44R-500 L5 CuZn, Au platinga = 4.5 mm; b = 6.0 mm, c = 15.5 mm
B 55a 100 blister
x32 K 486-500 L5 CuZn, Au platinga = 5.0 mm; b = 7.5 mm, c = 17.0 mm
B 55a 100 blister
x32 K 482-500 N5 CuZn, white bronze platinga = 8.0 mm; b = 12.0 mm; c = 21.5 mm
B 55a 100 blister
Panel Jack Straight Terminal2-hole flange
Coaxial End
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 722-500 E3 stainless steel, Au platingcaptivated center contact
B 55a 1
x32 K 722-500 S5 stainless steel, passivatedcaptivated center contact
B 55a 50 blister
x32 K 752-500 N5 CuZn, white bronze plating B 55h 100 blister
14.6
1.6
9.5
12.7
27.4
1.6
9.5 15
12.7
c
1.6
9.5 a
b
12.7
27.4
ø 16
1.6
159.5
15
ø 16
5.5
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com84
SMA
Panel Connectors - Striplineaccording MIL M83517
Panel Jack, 4-hole flange Stripline
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 421-600 S5 stainless steel, passivated B 55 100 blister
x32 K 441-600 L5 CuZn, Au plating B 55 100 blister
x32 K 441-600 N5 CuZn, white bronze plating B 55 100 blister
x32 K 424-600 S5 stainless steel, passivated B 55g 100 blister
Panel Jack, 2-hole flange Stripline
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 724-600 S5 stainless steel, passivated B 55g 100 blister
Panel Connectors - Microstripaccording to MIL M83517
Panel Plug, 4-hole flange Microstrip
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 S 421-700 S5 stainless steel, passivateds = 0.3 mm
B 55 100 blister
x32 S 422-700 S5 stainless steel, passivateds = 0.5 mm
B 55 100 blister
Panel Jack, 4-hole flange Microstrip
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Unit
x32 K 421-700 S5 stainless steel, passivateds = 0.3 mm
B 55 100 blister
12
12.7
1.6
9.5
Detail
1.3
0.1
13.7
1.6
9.5
0.5
3.2
0.1
12.7 Detail
13.7
1.6
0.59.5
Detail
0.1
3.2
13.9
1.6
SW 8
Detail
12.6
1.3
s
10.8
1.6
9.5
Detail
12.7
1.3
s
85Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
PCB Connectors
PCB Connectors - SMD
Straight Jack SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x32 K 10A-40M L5 CuZn, Au plating B 163 VG 08.50000 500 tape & reel
Right Angle Jack SMD
xOrdering Number Remarks Panel Piercing / PCB Layout
Packing Packing Unit
x32 K 242-40M L5 CuZn, Au plating B 207 VG 57.50000 100 blister, 500 tape & reel
Right Angle Panel Jack, edge mount SMD
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 K 243-40M L5 CuZn, Au platingfor panel thickness 0 mm to 2.5 mm
B 208 50 blister
x32 K 145-400 L5 CuZn, Au platingfor panel thickness 1.8 mm
B 206 100 blister
9.5
6.35
15
SW 7
7 9
14.5
5
9.5
3
14
7.8
14.27.
9
1.9
4.759.5
1
4.23
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com86
SMA
PCB Connectors
PCB Connectors - Solder Pin
Straight Jack Solder Pin
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 K 101-400 L5 CuBe or equivalent, Au platinga = 13.5 mm
B 30b 100 blister
Right Angle Jack Solder Pin
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 K 201-400 L5 CuBe or equivalent, Au platingwithout stand-off
B 30b 200 blister
x32 K 249-400 L5 CuZn, Au plating0.5 mm stand-off version
B 30b 200 blister
Right Angle Panel Jack Solder Pin
xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit
x32 K 246-400 L5 CuZn, Au plating B 66b / 168 100 blister
a
9.5
6.35
6.35
11.6
3.9
6.3
7
11
4
16
6.4
87Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Adaptors
Adaptors
Adaptors (In Series)
xOrdering Number Version Remarks Panel Piercing / PCB Layout
Packing Unit
x32 S 103-S00 L5 straight SMA male - maleOuter contact: stainless steel, Au platingCoupling Nut: CuBe or equivalent, Au plating
1
x32 S 105-K00 L5 straight SMA male - femaleCuBe or equivalent, Au plating
1
x32 K 101-K00 L5 straight SMA female - femaleCuBe or equivalent, Au plating
1
x32 K 101-KH0 L5 straightpanel
SMA female - femaleCuBe or equivalent, Au platinground flangepanel thickness max. 4.8 mmhermetic sealed
B 58 1
x32 K 621-K00 E3 straightpanel
SMA female - femalestainless steel, Au platinghexagonal flangepanel thickness max. 6.4 mmtool width 9.5 mm
B 56 1
x32 S 221-K00 E3 right angle SMA male - femaleCuBe or equivalent, Au plating
1
x32 S 301-K00 L5 T-adaptor SMA female - male - femaleCuBe or equivalent, Au platingThis connector is a non-matched 3 dB divider for LF applications
1
x32 K 301-K00 L5 T-adaptor SMA female - female - femaleCuBe or equivalent, Au platingThis connector is a non-matched 3 dB divider for LF applications
1
22.1
SW 8 SW 5.5
18.2
SW 8 SW 5.5
12.7
SW 5
13.9
ø 12
.7
SW 9.5
8.1
22.2
SW 8 SW 9.5
12.811
.6
SW 8
23.2
SW 8
23.2
11.6
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com88
SMA
Adaptors (Inter Series)
xOrdering Number Version Remarks Return Loss Panel Piercing / PCB Layout
Packing Unit
x119 S 132-S00 S5 straight P-SMP male - SMA male 1
x119 S 132-K00 S5 straight P-SMP male - SMA female 1
x119 K 132-S00 L5 straight P-SMP female - SMA male 1
x119 K 132-K00 L5 straight P-SMP female - SMA female 1
x28 S 132-S00 N5 straight QMA male - SMA male 1
x28 S 132-K00 N5 straight QMA male - SMA female 1
x28 K 132-S00 N5 straight QMA female - SMA male 1
x28 K 132-K00 N5 straight QMA female - SMA female 1
x32 S 151-S00 L5 straight SMA male - BNC male 1
SW8SW8
ø 9
23.2
22.3
ø 9
SW8
23.2
ø 9
SW8SW8
22.3
ø 9
SW8
28.4
SW 8
ø 10
.5
SW 8
24.5
SW8
ø 10
.5
25.4
SW8 SW8
21.5
SW8
28
ø 14
SW 8
89Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
x32 S 151-K00 L5 straight SMA male - BNC female 1
x32 K 151-S00 L5 straight SMA female - BNC male 1
x32 K 151-K00 L5 straight SMA female - BNC female 1
x32 S 156-S00 L5 straight SMA male - TNC male 1
x32 S 156-K00 L5 straight SMA male - TNC female 1
x56 S 132-K00 N5 straight TNC male - SMA female 1
x56 K 132-K00 N5 straight TNC female - SMA female 1
x32 S 153-S00 L5 straight SMA male - N male 1
x32 S 153-K00 L5 straight SMA male - N female 1
xOrdering Number Version Remarks Return Loss Panel Piercing / PCB Layout
Packing Unit
25
ø 14
SW 8
27
ø 14
24.2
ø 14
28
SW8
ø 14
25
SW8ø
14
27
24.2
ø 14
28
SW 8
31
SW8
ø 16
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com90
SMA
x53 S 132-K00 L5 straight N male - SMA female 1
x53 K 132-K00 L5 straight N female - SMA female 1
x32 S 453-K00 L5 straightpanel
SMA male - N female4-hole flange
B 12 1
x32 K 453-K00 L5 straightpanel
SMA female - N female4-hole flange
B 12 1
x32 RS 132-K00 L5 straight SMA reverse male - SMA Standard female
1
x32 RK 132-S00 L5 straight SMA reverse female - SMA Stan-dard male
1
x32 K 145-S00 L5 straight SMA female - 1.0-2.3 DIN 41626 male
1
x32 K 145-K00 L5 straight SMA female - 1.0-2.3 DIN 41626 female
1
x29 S 132-K01 N5 straightpanel
MCX male - SMA female B 56 1
xOrdering Number Version Remarks Return Loss Panel Piercing / PCB Layout
Packing Unit
27
30
ø 16
31
SW8
25.4
16.82
30
25.4
16.82
21.2
SW5.5SW8
21.2
SW 8SW 5.5
22.9
SW 6.4
ø 8
23.2
SW 6.4
ø 8
34.7
SW8
ø 8
SW8
14.4
91Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
x59 S 132-K00 L5 straight SMB male - SMA female 1
x59 K 132-K00 L5 straight SMB female - SMA female 1
x59 K 132-S00 L5 straight SMB female - SMA male 1
x59 S 132-S00 L5 straight SMB male - SMA male 1
x39 S 132-S00 L5 straight SMC male - SMA male 1
x39 S 132-K00 L5 straight SMC male - SMA female 1
x39 K 132-S00 L5 straight SMC female - SMA male 1
x39 K 132-K00 L5 straight SMC female - SMA female 1
x19 S 132-S00 S3 straight SMP male - SMA male 1
xOrdering Number Version Remarks Return Loss Panel Piercing / PCB Layout
Packing Unit
ø 9
25
SW 8
ø 9
26.7
SW 8
ø 9
26.5
SW 8
ø 9
25
SW 8
25
ø 9
SW 8
25
ø 9
SW 8
27.2
ø 9
SW 8 SW 8SW 6
27
ø 9
SW 8SW 6
24
SW8
ø9
SW8
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com92
SMA
x19 K 132-S00 D3 straight SMP female - SMA male 1
x19 S 132-K00 S3 straight SMP male - SMA female 1
x19 K 132-K00 D3 straight SMP female - SMA female 1
x32 K 160-S00 N5 straight SMA female - 7-16 male 1
x32 S 160-S00 N5 straight SMA male - 7-16 male 1
x16 S 132-S00 L5 straight FMC male - SMA male 1
x16 K 132-K00 S5 straight FMC female - SMA female 1
x05 S 132-S00 S3 straight RPC-N 50 Ω male - SMA male ≥ 23 dB @ DC to 18 GHz 1
x05 S 132-K00 S3 straight RPC-N 50 Ω male - SMA female ≥ 23 dB @ DC to 18 GHz 1
xOrdering Number Version Remarks Return Loss Panel Piercing / PCB Layout
Packing Unit
26
SW8
ø9
SW8
23.1
SW8
ø9
SW8
25.1
SW8
ø9
SW8
39
SW 32SW 14
41
SW 32SW 14
SW 8
SW8
ø 9
23.55
SW8 SW8
21.35
SW 8 SW 8
ø9
SW20 SW8SW14
45
SW20
43.1
SW14 SW13
93Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
x05 K 132-S00 S3 straight RPC-N 50 Ω female - SMA male ≥ 23 dB @ DC to 18 GHz 1
x05 K 132-K00 S3 straight RPC-N 50 Ω female - SMA female ≥ 23 dB @ DC to 18 GHz 1
x05 S 432-S00 S3 straightpanel
RPC-N 50 Ω male - SMA male, 4-hole flange
≥ 23 dB @ DC to 18 GHz B 12 1
x05 S 432-K00 S3 straightpanel
RPC-N 50 Ω male - SMA female, 4-hole flange
≥ 23 dB @ DC to 18 GHz B 12 1
x05 K 432-S00 S3 straightpanel
RPC-N 50 Ω female - SMA male, 4-hole flange
≥ 23 dB @ DC to 18 GHz B 12 1
x05 K 432-K00 S3 straightpanel
RPC-N 50 Ω female - SMA female,4-hole flange
≥ 23 dB @ DC to 18 GHz B 12 1
x06 S 132-S00 S3 straight RPC-TNC male - SMA male ≥ 19 dB @ DC to 18 GHz 1
x06 S 132-K00 S3 straight RPC-TNC male - SMA female ≥ 19 dB @ DC to 18 GHz 1
x06 K 132-S00 S3 straight RPC-TNC female - SMA male ≥ 19 dB @ DC to 18 GHz 1
xOrdering Number Version Remarks Return Loss Panel Piercing / PCB Layout
Packing Unit
SW 14
43.8
SW 8
SW14 SW13
41.9
SW14
41.3
SW20 SW8
25.4
39.4
25.4
SW20 SW14
SW 14
40.2
SW 8
25.4
SW 14
38.4
25.4
45.9
SW14SW14
ø 15
.7
SW15 SW8
45.4
SW13SW14
ø 15
.7
SW15
47.3
SW14SW14
ø 15
.7
SW8
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com94
SMA
x06 K 132-K00 S3 straight RPC-TNC female - SMA female ≥ 19 dB @ DC to 18 GHz 1
x07 P 132-S00 S3 straight RPC-7 - SMA male ≥ 23 dB @ DC to 18 GHz 1
x07 P 132-K00 S3 straight RPC-7 - SMA female ≥ 23 dB @ DC to 18 GHz 1
x15 S 132-K04 L5 straight Micro-RF male - SMA femalefor 15 K 101-40M E4slide-onMating cycles ≥ 200000
1
x15 S 132-K02 L5 straight Micro-RF male - SMA femalefor 15 K 101-40M E4snap-onMating cycles ≥ 10000
1
x15 S 132-K05 L5 straight Micro-RF male - SMA femalefor 15 K 101-40M E4snap-onMating cycles ≥ 10000
1
xOrdering Number Version Remarks Return Loss Panel Piercing / PCB Layout
Packing Unit
45.4
SW13SW14
ø 15
.7
SW14
38.7
SW19
ø 22
ø 15
.7
SW8
SW13
37.4
SW19
ø 22
ø 15
.7
36.8
22.5
SW 6
14.96
SW 6
95Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Terminations
Terminations
Termination Pug
xOrdering Number Remarks Return Loss Packing Unit
x32 S 15R-0.5 F5 0.5 WattFrequency: DC to 12.4 GHza = 15.5 mm
≥ 32.2 dB @ DC to 2 GHz≥ 26.4 dB @ 2 GHz to 8 GHz≥ 21.2 dB @ 8 GHz to 12.4 GHz
1
x32 S 17R-0.5 F5 0.5 WattFrequency: DC to 18 GHza = 15.5 mm
≥ 32.2 dB @ DC to 2 GHz≥ 26.4 dB @ 2 GHz to 8 GHz≥ 21.2 dB @ 8 GHz to 12.4 GHz≥ 20.8 dB @ 12.4 GHz to 18 GHz
1
x32 S 15R-1.0 F5 1 WattFrequency: DC to 18 GHza = 15.5 mm
≥ 28.3 dB @ DC to 4 GHz≥ 26.4 dB @ 4 GHz to 6 GHz≥ 24.3 dB @ 6 GHz to 10 GHz≥ 23.1 dB @ 10 GHz to 12.4 GHz≥ 22.1 dB @ 12.4 GHz to 14 GHz≥ 19.1 dB @ 14 GHz to 18 GHz
1
x32 S 17B-1.0 E3 1 WattFrequency: DC to 18 GHza = 10.0 mm
≥ 26.4 dB @ DC to 1 GHz≥ 19.1 dB @ 1 GHz to 18 GHz
1
x32 S 22R-080 L5 80 WattFrequency: DC to 2.3 GHz
typ. 30.7 dB @ DC to 2 GHztyp. 26.4 dB @ 2 GHz to 2.3 GHz
1
Termination Jack
xOrdering Number Remarks Return Loss Packing Unit
x32 K 15R-001 E3 1 WattFrequency: DC to 12.4 GHz
≥ 32.2 dB @ DC to 2 GHz≥ 26.4 dB @ 2 GHz to 8 GHz≥ 21.2 dB @ 8 GHz to 12.4 GHz
1
x32 K 17R-001 E3 1 WattFrequency: DC to 18 GHz
≥ 32.2 dB @ DC to 2 GHz≥ 26.4 dB @ 2 GHz to 8 GHz≥ 21.2 dB @ 8 GHz to 12.4 GHz≥ 20.8 dB @ 12.4 GHz to 18 GHz
1
a
SW 8
ø 6.
3
16
SW 8
3.3
22
329.5
13.2
Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com96
SMA
Accessories
Accessories
Protection Cap with chain
xOrdering Number Remarks Packing Unit
x32 Z 112-000 F male with seal 1
Short
xOrdering Number Remarks Packing Unit
x32 Z 111-000 L5 male 1
x32 Z 114-000 L5 female 1
SW 8
9.7
SW 8
9.8
SW8
97Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com
SMA
SM
A
Tools
Special Tools
Assembly Tool Kit SMA for Semi Rigid Cables
xOrdering Number Remarks Packing Unit
x32 W 100-000 complete tool set in plastic box 1
Contents of the Assembly Tool Kitfor Semi Rigid Cables (32 W 100-000)
xOrdering Number Remarks
x32 W 100-001 Soldering FixtureLötvorrichtung
x32 W 100-002 Insert for RG 405Backen für RG 405
x32 W 100-003 Insert for RG 405Backen für RG 405
x32 W 100-004 Jack LocatorFixierschraube für Kuppler
x32 W 100-005 Plug LocatorFixierschraube für Stecker
x32 W 100-006 Soldering Gauge 0.25 mmDistanzlehre 0.25 mm
x32 W 100-007 Soldering Gauge 0.4 mmDistanzlehre 0.4 mm
x32 W 100-008 Contact Support (for plug and jack)Kontakthalter (für Stecker und Kuppler)
x32 W 100-009 Dielectric Insertion Tool for PlugsIsolierteil-Einpresswerkzeug für Stecker
x32 W 100-010 Dielectric Insertion Tool for JacksIsolierteil-Einpresswerkzeug für Kuppler
x32 W 100-011 Assembly Jig (center contact + insulator)Montagelehre (Innenleiter + Isolierteil)
x32 W 100-012 Assembly Jig (outer contact + coupling nut)Montagelehre (Außenleiter + Überwurfmutter)
x32 W 100-013 Assembly Jig (center contact + insulator)Montagelehre (Innenleiter + Isolierteil)
x32 W 100-014 Cutting ToolPlanschneidewerkzeug
x32 W 100-015 Sharpening ToolAnspitzwerkzeug
x32 W 100-016 Torque WrenchDrehmomentschlüssel
x32 W 100-017 Insulator Insertion ToolAndrückwerkzeug für Isolierteil
x32 W 100-018 Insulator Press In ToolEinpresswerkzeug für Isolierteil
x32 W 100-022/01 Conical SleeveKegelhülse
x32 W 100-022/02 ArresterGegenhalter
x32 W 100-022/03 Fixing Tool IStössel I
x32 W 100-022/04 Fixing Tool IIStössel II
top related