ek 1 lapp. rett. ek 5 ek 5 lapp. rett. 082 112082 · gradone angolare / hek 201 (dx/sx) gradone...
Post on 30-Oct-2018
217 Views
Preview:
TRANSCRIPT
EK 140x80 16”x32”
EK 540x80 16”x32”
EK 1 Lapp. Rett.40x80 16”x32”
EK 5 Lapp. Rett.40x80 16”x32”
082 082112 112
Mosaico / EK 130x30 12”x12”
Mosaico / EK 530x30 12”x12”
180 6 180 6
10030 1003010030 100302150 21502150 2150
Muretto Tredì / EK 130x60 12”x24”
Muretto Tredì / EK 530x60 12”x24”
Stonemix / EK 130x60 12”x24”
Stonemix / EK 530x60 12”x24”
EK 130x60 12”x24”
EK 530x60 12”x24”073 073
077 077
EK 120x80 8”x32”
EK 520x80 8”x32”
Battiscopa / EK 18x80 31/8”x32”BullnoseSockelleistePlinthes
Battiscopa / EK 58x80 31/8”x32”BullnoseSockelleistePlinthes
Battiscopa / EK 1 Lapp. Rett.8x80 31/8”x32”BullnoseSockelleistePlinthes
Battiscopa / EK 5 Lapp. Rett.8x80 31/8”x32”BullnoseSockelleistePlinthes
Gradone Lineare / EK 133x80 13”x32”StepStufeNez de marche
Gradone Lineare / EK 533x80 13”x32”StepStufeNez de marche
Gradone Angolare / EK 1 (DX/SX)33x40 13”x16”StepStufeNez de marche
Gradone Angolare / EK 5 (DX/SX)33x40 13”x16”StepStufeNez de marche
Pezzi Speciali Special Pieces • Formteile • Pièces spéciales Pezzi Speciali Special Pieces • Formteile • Pièces spéciales
4 44 4125 125293 293
Steel0,5x60 2/8”x24”
Steel0,5x60 2/8”x24”
Listello Metal1x60 11/4”x24”
Listello Metal1x60 11/4”x24”
Metal A1x1 1/4”x1/4”
Metal A1x1 1/4”x1/4”6034 6034
6034 6034
4003 4003
Listello Brushed Metal1,5x60 1/2”x24”
Listello Brushed Metal1,5x60 1/2”x24”6034 6034
Box
Europallet
PackageRESISTENZA AL GELO
FROST RESISTANCE
FROSTBESTÄNDIGKEIT
RESISTANCE AU GEL
RESISTANTISO 10545.12
ASCIUTTO
DRY
TROCKEN
SEC
R 9*->0,60*>0,40*
BAGNATO
WET
NASS
MOUILLE
-A+B*>0,60*>0,40*
ASSORBIMENTO D’ACQUA
WATER ABSORPTION
WASSERAUFNAHME
ABSORPTION D’EAU
~0,1%ISO 10545.3
CAMPO D’IMPIEGO CONSIGLIATO
RECOMMENDED USE
ANWEDUNGSBEREICH
PIECE D’EMPLOI CONSEILLEE
SPESSORE
THICKNESS
STAERKE
ÉPAISSEUR
10,3 mm
RESISTENZA ALLOSCIVOLAMENTO
SLIPPING RESISTANCE
RUTSFESTIGKEIT
FACTEUR DE RESISTANCEANTIGLISSEMENT
DIN 51130DIN 51097ASTM C1028:BCRA
RESISTENZA CHIMICA
CHEMICAL RESISTANCE
BESTÄNDIGKEIT GEGENCHEMIKALIEN
RESISTANCE CHIMIQUE
GAUNI EN ISO 10545.13
5UNI EN ISO 10545.14
Pieces
Mq.
Kg.
Boxes
Mq.
Kg.
LOW
SHADE VARIATION
MODERATE HIGH RANDOM
LA PORCELLANA SMALTATA
THE GLAZED PORCELAIN
GLASIERTES FEINSTEINZEUG
LA PORCELAINE EMAILÉE
Price codes: Mq. Ml. Pieces
40x803
0,96
22,00
28
26,88
618,00
20x807
1,12
25,00
42
47,04
1070,00
30x606
1,08
23,00
40
43,20
941,00
*Escluso Lapp./Rett. - *Except for Lapp./Rett. - *Excepté le Lapp./Rett. - *Ausgeschlossen Lapp./Rett.
EK 1140x80 16”x32”
EK 11 Lapp. Rett.40x80 16”x32”
082 112
Mosaico / EK 1130x30 12”x12”
180 6
10030 10030 2150 2150
Muretto Tredì / EK 1130x60 12”x24”
Stonemix / EK 1130x60 12”x24”
EK 1130x60 12”x24” 073
077
EK 1120x80 8”x32”
Battiscopa / EK 118x80 31/8”x32”BullnoseSockelleistePlinthes
Battiscopa / EK 11 Lapp. Rett.8x80 31/8”x32”BullnoseSockelleistePlinthes
Gradone Lineare / EK 1133x80 13”x32”StepStufeNez de marche
Gradone Angolare / EK 11 (DX/SX)33x40 13”x16”StepStufeNez de marche
Pezzi Speciali Special Pieces • Formteile • Pièces spéciales
44125 293
Steel0,5x60 2/8”x24”
Listello Metal1x60 11/4”x24”
Metal A1x1 1/4”x1/4” 6034
6034
4003
Listello Brushed Metal1,5x60 1/2”x24” 6034
Box
Europallet
PackageRESISTENZA AL GELO
FROST RESISTANCE
FROSTBESTÄNDIGKEIT
RESISTANCE AU GEL
RESISTANTISO 10545.12
ASSORBIMENTO D’ACQUA
WATER ABSORPTION
WASSERAUFNAHME
ABSORPTION D’EAU
~0,1%ISO 10545.3
CAMPO D’IMPIEGO CONSIGLIATO
RECOMMENDED USE
ANWEDUNGSBEREICH
PIECE D’EMPLOI CONSEILLEE
SPESSORE
THICKNESS
STAERKE
ÉPAISSEUR
10,3 mm
RESISTENZA ALLOSCIVOLAMENTO
SLIPPING RESISTANCE
RUTSFESTIGKEIT
FACTEUR DE RESISTANCEANTIGLISSEMENT
DIN 51130DIN 51097ASTM C1028:BCRA
RESISTENZA CHIMICA
CHEMICAL RESISTANCE
BESTÄNDIGKEIT GEGENCHEMIKALIEN
RESISTANCE CHIMIQUE
GAUNI EN ISO 10545.13
5UNI EN ISO 10545.14
Pieces
Mq.
Kg.
Boxes
Mq.
Kg.
LOW
SHADE VARIATION
MODERATE HIGH RANDOM
LA PORCELLANA SMALTATA
THE GLAZED PORCELAIN
GLASIERTES FEINSTEINZEUG
LA PORCELAINE EMAILÉE
Price codes: Mq. Ml. Pieces
40x803
0,96
22,00
28
26,88
618,00
20x807
1,12
25,00
42
47,04
1070,00
30x606
1,08
23,00
40
43,20
941,00
*Escluso Lapp./Rett. - *Except for Lapp./Rett. - *Excepté le Lapp./Rett. - *Ausgeschlossen Lapp./Rett.
ASCIUTTO
DRY
TROCKEN
SEC
R 9*->0,60*>0,40*
BAGNATO
WET
NASS
MOUILLE
-A+B*>0,60*>0,40*
Box
Europallet
PackageRESISTENZA AL GELO
FROST RESISTANCE
FROSTBESTÄNDIGKEIT
RESISTANCE AU GEL
RESISTANTISO 10545.12
ASCIUTTO
DRY
TROCKEN
SEC
R 11->0,60>0,40
BAGNATO
WET
NASS
MOUILLE
-A+B+C>0,60>0,40
ASSORBIMENTO D’ACQUA
WATER ABSORPTION
WASSERAUFNAHME
ABSORPTION D’EAU
~0,1%ISO 10545.3
CAMPO D’IMPIEGO CONSIGLIATO
RECOMMENDED USE
ANWEDUNGSBEREICH
PIECE D’EMPLOI CONSEILLEE
SPESSORE
THICKNESS
STAERKE
ÉPAISSEUR
20 mm
RESISTENZA ALLOSCIVOLAMENTO
SLIPPING RESISTANCE
RUTSFESTIGKEIT
FACTEUR DE RESISTANCEANTIGLISSEMENT
DIN 51130DIN 51097ASTM C1028BCRA
RESISTENZA CHIMICA
CHEMICAL RESISTANCE
BESTÄNDIGKEIT GEGENCHEMIKALIEN
RESISTANCE CHIMIQUE
GAUNI EN ISO 10545.13
5UNI EN ISO 10545.14
Pieces
Mq.
Kg.
Boxes
Mq.
Kg.
LOW
SHADE VARIATION
MODERATE HIGH RANDOM
GRES PORCELLANATO A TUTTA MASSA
THROUGH-BODY PORCELAIN TILE
DURCHGEFÄRBTES FEINSTEINZEUG
LE GRÈS CÉRAME PLEINE MASSE
Price codes: Mq. Ml. Pieces
40x802
0,64
28,26
24
15,36
699,00
Sistemi di posa - Laying systems • Verlegungsarten • Systèmes de pose
Posa tradizionaleStandard laying - Herkömmliche Verlegungsart - Pose traditionnelle
Posa su erbaLaying on grass - Verlegung auf Wiese - Pose sur pelouse
Posa su ghiaia o sabbiaLaying on gravel or sand - Verlegung auf Kies-oder Sand-Bett - Pose sur sable ou sur gravier
22 mm 28 mm35 mm
50 mm65 mm
30 mm 37 mm50 mm
70 mm100 mm
20011
20005 20005 20005
20011 25011 25011 25012
Supporto 22-30 mm
Per pendenze superiori al 3% è possibile sovrapporrepiù correttori di pendenza.For slopes over 3%, two or more slope regulators can be piled up on each other.Bei Gefällen ueber 3% darf man mehreren Neigungsregler aufeinander verwenden.Pour des pentes supérieures à 3% on peut superposer plusieurs correcteurs de pente.
1% 2% 3%Supporto 28-37 mm
Supporto 35-50 mm
Supporto 50-70 mm
Supporto 65-100 mm
Supporti Supports • Stelzlager • Supports Correttori di pendenza Slope regulators • Neigungsverstellager • Correcteurs de pente
Supporti di altezza superioresono disponibili a richiestaHigher slope regulators areavailable on request.Höher verstellbare Stelzlagersind auf Anfrage vorhanden.Supports de hauteur majeuredisponibles sur demande.
Posa sopraelevataRaised laying - Verlegung auf Stelzlagern - Pose surélevée
Posa sopraelevata con correttori di pendenzaRaised laying with Slope regulatorsVerlegung auf Stelzlagern mit NeigungsreglernPose surélevée avec correcteurs de pente
Superfici planariPlane surfacesGleichebenen FlaechenSurfaces planes
Superfici inclinateInclined surfacesFlächen mit NeigungswinkelSurfaces inclinées
Gradone Angolare / HEK 211 (DX/SX)
Gradone Angolare Rett. / HEK 211 (DX/SX)
40x40 16”x16”Corner stepEckstufeNez de marche angulaire
Gradone Angolare / HEK 205 (DX/SX)
Gradone Angolare Rett. / HEK 205 (DX/SX)
40x40 16”x16”Corner stepEckstufeNez de marche angulaire
Gradone Angolare / HEK 201 (DX/SX)
Gradone Angolare Rett. / HEK 201 (DX/SX)
40x40 16”x16”Corner stepEckstufeNez de marche angulaire
Pezzi Speciali Special Pieces • Formteile • Pièces spéciales
Gradone Lineare / HEK 201
Gradone Lineare Rett. / HEK 201
40x80 16”x32”StepStufeNez de marche
Gradone Lineare / HEK 205
Gradone Lineare Rett. / HEK 205
40x80 16”x32”StepStufeNez de marche
Gradone Lineare / HEK 211
Gradone Lineare Rett. / HEK 211
40x80 16”x32”StepStufeNez de marche
2109 2109 2109
2120 2120 2120
210921092109
212021202120
HEK 20140x80 - 16”x32”
HEK 201 Rett.40x80 - 16”x32”
146 168
HEK 21140x80 - 16”x32”
HEK 211 Rett.40x80 - 16”x32”
146 168
HEK 20540x80 - 16”x32”
HEK 205 Rett.40x80 - 16”x32”
146 168
MODENA CENTRO PROVE s.r.l.
Sede legale e Laboratori: 41123 Modena (Italy) - Via Sallustio, 78
Tel. 059 822417 r.a. - Fax 059380281 - e-mail : info@modenacentroprove.it - www.modenacentroprove.com
C.C.I.A.A. Modena n. 228587 - Tribunale di Modena n° 2231 - C.F. e P. IVA n. 01592020364
MECCANICA ECOLOGIA CERAMICA ALIMENTARE
Page 1
Certificato n° 50 100 4582
Diploma IWR/IT n° 30438
Socio
Membro
Socio
Iscritto
Modena, 19/12/13 To CERAMICA DEL CONCA SPA
VIA CROCE 8 FRAZIONE S.ANDREA CASAL
47832 SAN CLEMENTE RN Attn. G. MUNARI
MATERIAL and/or SAMPLE to be tested : PORCELAIN TILES;
Denomination of the Sample : EK01 cm 20X80;
Client Reference: Your delivery VS CONSEGNA date:
Here attached, you will receive the Test Report of Serial No. 20136849/n, which shows the
results of tests required.
MODENA CENTRO PROVE
MODENA CENTRO PROVE s.r.l.
Sede legale e Laboratori: 41123 Modena (Italy) - Via Sallustio, 78
Tel. 059822417 r.a. - Fax 059380281 - e-mail : info@modenacentroprove.it - www.modenacentroprove.com
C.C.I.A.A. Modena n. 228587 - Tribunale di Modena n° 2231 - C.F. e P. IVA n. 01592020364
Page 1 di 2 of Test Report n° 20136849/1
TEST REPORT: 20136849/1 20136849
Modena, 19/12/13
CUSTOMER CERAMICA DEL CONCA SPA - - VIA CROCE 8 FRAZIONE S.ANDREA
CASAL - 47832 - SAN CLEMENTE - RN
MATERIAL and/o SAMPLE to be
tested PORCELAIN TILES;
Denomination EK01 cm 20X80;
Date of sample reception 12/12/2013;
Kind of test executed Determination of Dynamic Coefficient of Friction (DCOF)
Referring standards ANSI A137.1:2012 Version 1
Shifting from standards None
Equipment Tribometer BOT 3000 cod. C110
Calibration Cert. n. MCP081213A del 12/08/2013
Subcontracted phases
Sampling made by Customer
The test results showing in this Report are only referred to the sample taken by our staff or supplied by the Customer. He commits himself to reproduce integrally this document. Partial reproduction is forbidden. The times of retain of the samples was indicated in the offer related to the test report.
MODENA CENTRO PROVE s.r.l.
Sede legale e Laboratori: 41123 Modena (Italy) - Via Sallustio, 78
Tel. 059822417 r.a. - Fax 059380281 - e-mail : info@modenacentroprove.it - www.modenacentroprove.com
C.C.I.A.A. Modena n. 228587 - Tribunale di Modena n° 2231 - C.F. e P. IVA n. 01592020364
Page 2 di 2 of Test Report n° 20136849/1
DETERMINATION OF DYNAMIC COEFFICIENT OF FRICTION
Beginning date : 12/12/2013 Analysis ending date : 12/12/2013
SAMPLE : Ceramic tiles, marked « EK01 cm 20X80 »
The test has been carried out using the instrument BOT 3000, tribometer of the coefficient of dynamic friction (DCOF) between a sliding SBR sensor and the surface of test.
WET OPERATING CONDITION
All test specimens shall be cleaned prior to testing. Place three specimens on a solid surface in a row. Wet the path that
the sensor will follow with 0,05% SLS (Sodium-Lauryl Sulfate) water.
Make a total of four dynamic measurement on the center tile. Make one measurement then turn the BOT 3000 180° and
make the second measurement. Then turn the tile 90° and make the final two measurements in the same fashion above.
Record all four dynamic measurements and take an average.
Repeat on other two additional pieces. For textured tile, the three pieces of tile shall be representative of the different
texture variations. If the tile is known to have more than three texture variations, test a representative tile of each texture.
SENSOR VERIFICATION
Values of DCOF on standard tile before testing test specimens 0,30
Values of DCOF on standard tile after testing test specimens 0,28
RESULTS
Test Condition Measure 1 Measure 2 Measure 3 Measure 4 Average
Wet DCOF - tile 1 0,66 0,68 0,66 0,66 0,66
Wet DCOF - tile 2 0,71 0,70 0,70 0,69 0,70
Wet DCOF - tile 3 0,68 0,68 0,69 0,68 0,68
REFERENCE VALUES
ANSI A137.1:2012, Version 1, prescribe (6.2.2.1.10) a minimum threshold of 0,42 for level interior spaces expected to be
walked upon when wet.
top related