fino 20s-25s-30s
Post on 19-Jul-2016
261 Views
Preview:
DESCRIPTION
TRANSCRIPT
CONTENTS
2
PRECATION………………………………………………………………………………………………………3
Ⅰ. SPECFICATION………………………………………………………………………………………………4
Ⅱ. PRODUCT CONSTRUCTION1. CIRCUIT DIAGRAM ………………………………………………………………………………………………5
2. WIRING DIAGRAM ………………………………………………………………………………………………7
Ⅲ. ADJUSTMENT PROCEDURE1. AF ADJUSTMENT …………………………………………………………………………………………………8
2. AE ADJUSTMENT …………………………………………………………………………………………………8
3. PUNT ADJUSTMENT………………………………………………………………………………………………8
Ⅳ. EXPLODED VIEWS AND PARTS LIST1. PARTS ARRANGEMENT FOR EACH PCB ……………………………………………………………………10
2. ASSEMBLY THE PARTS
1) MAIN ASSEMBLY ……………………………………………………………………………………………12
2) SHUTTER BASE & FRONT COVER ASSEMBLY ……………………………………………………………15
3) VF BASE ASSEMBLY …………………………………………………………………………………………18
4) EACH PARTS ASSEMBLY (1/2) ……………………………………………………………………………20
5) EACH PARTS ASSEMBLY (2/2) ……………………………………………………………………………22
6) MIDDLE & BACK COVER ASSEMBLY (ST) ………………………………………………………………24
7) BACK COVER ASSEMBLY (QD) ……………………………………………………………………………26
Ⅴ. SPARE PARTS ORDER FORM ………………………………………………………………………28
3
PRECAUTION
1. When receiving the camera■Check the battery voltage and external appearance
■Write down the claim and complaint.
■Check the defective point when operating the camera.
2. When repairing the camera■Repair the defective point.
AE Check-Confirm whether the moving state of sector is OK or not.
Punt Check-There should be satisfied with the value of inspect in the service manual.
■FinderCheck the finder magnification.
■Take the leakage current check by all means after repair.Standard of light-leakage.-In case of 3V camera → Below 50㎂ at the 2.5V
■When assembling the camera, you must attach the shields and the tapes to the originalplace.If not, the light-leakage will occur.
■Check the light-leakage after repairing the camera.Confirm whether the camera is light-leakage or not.
3. After the repair is completed■Check the operation state of the shutter.
■Check the winding and rewinding state.
■Check the leakage light and leakage current.
INSPECTION ITEM OF CUSTOMER SERVICE
4
Ⅰ. SPECIFICATIONS
● Type35mm motorized camera with lager view finder.
LensFocus distance : 29±5%Brightness : F 4.5±5% (F no. : 5.6), (F 5.6±5% : FINO 20S)3elements in 3 group
Auto Focus (Only Fino 30S, Maxima 30S)Active IR amplitude auto focus system.Number of step : 2 steps.Change over point : 2.5m±0.5mFocusing range : 1.3mm~∞
Exposure ControlShutter type : Single blade shutter.Shutter speed : 1/250 fixed(1/7~1/145secs)CdS Type.
FinderAlbada Type, 0.55X, 80%.
FilmDX film auto sensitivity set up : ISO 100, 400.
Flash RangeG/No. : 8±1Auto Mode, Red-eye reduction, Fill-In, Flash Off.Flash Shooting range : 1.3m~2.4m(ISO 100), 1.3m~4.8m(ISO 400)
Charge TimeAbout 7sec.
PowerAA type alkaline or manganese Battery X2 (3V).Film Abvance.Auto Winding, Rewinding Mid-Roll Rewinding.
CounterMechanical count-up & down in rewinding.
Standard Dimension & Weight117(w) × 67(h) × 166(g) (ST), 179(QD)
Ⅱ. PRODUCT CONSTRUCTION
5
1-1. CIRCUIT DIAGRAM (FINO 30S, MAXIMA 30S)
6
Ⅱ. PRODUCT CONSTRUCTION
1-2. CIRCUIT DIAGRAM (FINO 20S, MAXIMA 20S)
7
Ⅱ. PRODUCT CONSTRUCTION
2. WIRING DIAGRAM
8
Ⅲ. ADJUSTMENT PROCEDURE
1. AF ADJUSTMENTOPERATION DESCRIPTION
1) Put the battery and fix the camera to tripod.
2) Press the release button 5 times to emit the infrared beam toward chart panel located at 2.5m.
3) Adjust the variable resister VR1 with the driver so that the rate of the AF magnet is on.
4) Press the release button 5 times to emit the infrared beam toward chart panel located at 1.8m.
5) Adjust the variable resister VR1 with the driver so that the rate of the AF magnet is off.
2. AE ADJUSTMENTOPERATION DESCRIPTION
1) Put the camera to AE tester and set the EV 12.
2) Adjust the screw (refer to next page) so that the △EV value is LV12 : 0.3±0.3 and LV15 : 1~3
KEY POINT
1) Flash ON : LV11.5±0.3
2) Flash OFF : LV 12
3. PUNT ADJUSTMENTOPERATION DESCRIPTION
1. Use a flat-type collimator with f=193.5mm for the punt adjustment and adjustment confirmation.
2. Set the Mirror of the focus fixing table is 0mm.
3. Make a B Shutter(refer to next page)
4. Rotate the objective lens of collimator between -11±2 slowly to let the image to be most sharpest.
In case of the FINO 30S : -11±2
In case of the FINO 20S : -11.5±2
9
Ⅲ. ADJUSTMENT PROCEDURE
■TEST MODE POINT
10
Ⅳ. EXPLODED VIEWS AND PART LIST
1. PARTS ARRANGEMENT FOR MAIN PCBA1) TOP
2) BOTTOM
11
Ⅳ. EXPLODED VIEWS AND PART LIST
SupplySymbol Parts No. Parts Name Q’ty Available Remarks
Parts- 9006-0102-01A Main PCB A 1 ○ AF- 121-2109 Main PCB A 1 ○ SF
Q6, 7 0501-0078-01A TR 1 ×TH1 0501-0080-01A SCR 1 ×Q5 0501-0079-01A TR 1 ×D6 0613-0003-01A F.R.D 1 ×
D3,4,5 0401-0018-01A Diode 3 ×C2 2401-0053-01A Electrolytic Capacitor 2 ×C1,3 2401-00549-01A Electrolytic Capacitor 2 ×C4 2309-0001-01A Mylar Capacitor 1 ×C5 2401-0055-01A Flash Capacitor 1 ×T1 2603-0020-01A Trans 1 ○T2 2604-0013-01A Trig Cioll 1 ○U1 1300-0010-01A AF IC 1 × AF
Q1,3,4,8 0501-0076-01A TR 4 ×0501-0077-01A TR 1 ×
Q2 0504-0001-01A TR 1 ×R19,20 9434-1022-01 Chip Resistor 2 ×
R2,5,10,16 9434-1032-01 Chip Resistor 4 ×R13 9434-1052-01 Chip Resistor 1 ×R8 9434-1542-01 Chip Resistor 1 ×R9 9434-2242-01 Chip Resistor 1 ×R4,7 9434-3312-01 Chip Resistor 1 ×R6 9434-3332-01 Chip Resistor 1 ×R14 2007-0287-01A Chip Resistor 1 ×R15 2007-0296-01A Chip Resistor 1 ×R1 9434-3902-01 Chip Resistor 1 ×R12 9434-5602-01 Chip Resistor 1 ×R3,18 9434-5612-01 Chip Resistor 1 ×VR1 2104-0014-01A VR 2 × AFC8,10 2203-0070-01A Chip Condenser 1 ×C9 2203-0071-01A Chip Condenser 2 ×C7 2203-0072-01A Chip Condenser 1 ×R21 9434-1012-01 Chip Resistor 1 × AF
12
Ⅳ. EXPLODED VIEWS AND PART LIST
1. MAIN ASSEMBLY72
1104
8301
A
9001
0574
01A
9001
0562
01A
6107
0364
01A
6003
0249
01A
7308
0101
01A
(F
INO
25S
)
9761
1730
12
3408
0006
01A
6003
0251
01A
9007
0995
01A
9007
1463
01A
(F
INO
25S
)
7307
0034
01A
7307
0010
01A
(F
INO
25S
)
9002
0608
01A
9001
0563
01A
9001
0564
01A
9004
0140
01A
9001
0572
01A
9761
1730
12
9761
1735
12
9761
1730
12
9761
1720
07
9761
1750
07
9761
1750
07
9761
1725
07
9761
1730
12
7211
0475
01A
7211
0479
01A
7211
0474
01A
3811
0625
01A
7409
0832
01A 74
0908
3301
A
6107
0362
01A
7017
0234
01A
9006
0102
01A
9005
0110
01A
9761
-173
012
6003
0247
01A
4629
1170
1A
9007
7099
01A
9001
0570
01A
9001
0569
01A
6003
0250
01A
9003
0130
01A
6003
0247
01A
9001
0566
01A
9761
1725
07
9761
1735
1272
1105
0101
A
7211
0487
01A
7211
0485
01A
7211
0484
01A
7211
0502
01A
7211
0490
01A
7211
0490
01A
7211
0480
01A
7211
0492
01A
7211
0494
01A
7211
0493
01A
7211
0498
01A
7211
0499
01A
7211
0500
01A 90
0803
7201
A (
FIN
O 2
5S)
7211
0488
01A
7211
0486
01A
9001
0561
01A
9001
0564
01A
9007
0993
01A
9007
0997
01A
9007
0992
01A
0462
9117
01A
13
Ⅳ. EXPLODED VIEWS AND PART LIST
SupplyParts No. Parts Name Q’ty Available Remarks
Parts3811-0625-01A Lead Wire 2 ×3408-0006-01A Leaf Switch 1 ○9002-0608-01A Lens 1 ○7211-0498-01A V.F-01 1 ○7211-0499-01A V.F-02 1 ○7211-0500-01A V.F-03 1 ○7211-0501-01A AF Lens (FINO 30S) 1 ×9761-1720-07 Screw 1 ×9761-1725-07 Screw 3 ×9761-1730-12 Screw 5 ×9761-1735-12 Screw 6 ×9761-1750-07 Screw 2 ×0462-9117-01A Screw 3 ×6003-0247-01A Screw 2 ×6003-0248-01A Screw 1 ×6003-0249-01A Screw 2 ×6003-0250-01A Screw 2 ×6003-0251-01A Screw 1 ×6003-0252-01A Screw 2 ×6003-0253-01A Screw 2 ×7211-0474-01A Back Door SW 1 ○7211-0475-01A DX-SP Cover 1 ○7011-0334-01A DX Contact 3 ×7017-0234-01A Film Holder Press 1 ○6107-0362-01A Back Door SW Spring 1 ×7211-0476-01A VF Cover 1 ○7211-0479-01A Film Senser Button 1 ×7211-0480-01A Release Button 1 ○7211-0502-01A Motor Gear Base 1 ○7211-0483-01A Spool 1 ○7211-0484-01A G1 1 ○7211-0485-01A G2 1 ○7211-0486-01A G3 1 ○7211-0487-01A G4 1 ○7211-0488-01A G5 1 ○7211-0490-01A G7 1 ○7211-0491-01A G8 4 ○7211-0492-01A G9 1 ○7211-0493-01A G13 1 ○7211-0494-01A Sprocket 1 ○7307-0034-01A Flash Button (FINO 30S) 1 ○7308-0099-01A Flash Button (FINO 20S) 1 ○7308-0010-01A Flash Button (FINO 25S) 1 ○6107-0364-01A R/W Spring 1 ×7409-0832-01A Suede 1 ×9001-0561-01A Rewind Gear Ass’y 1 ○9001-0572-01A Film Press Ass’y 1 ○9001-0562-01A Rewind SW 1 ○9001-0563-01A Rewind Contact Ass’y(UP) 1 ×
■ PARTS LIST
14
SupplyParts No. Parts Name Q’ty Available Remarks
Parts9001-0564-01A Rewind Contact Ass’y(UP) 1 ×9001-0565-01A Spring Plate Ass’y 1 ○9001-0566-01A Counter Ass’y 1 ○9001-0569-01A Battery Contact Ass’y(-) 1 ×9001-0570-01A Battery Contact Ass’y(+) 1 ×9005-0110-01A Shutter Base Ass’y (FINO 30) 1 ○121-2014 Shutter Base Ass’y (FINO 20 / 25) 1 ○9001-0574-01A Motor Ass’y 1 ○9004-0140-01A Flash Ass’y 1 ○9006-0102-01A Main PCBA (FINO 30S) 1 ○9008-0370-01A Main PCBA (FINO 20S) 1 ○9008-0371-01A Main PCBA (FINO 25S) 1 ○9008-0372-01A Self PCBA (FINO 25S) 1 ○7308-0101-01A Self Button (FINO 25S) 1 ○9003-0130-01A VF Base Ass’y (FINO 30) 1 ○9001-0802-01A VF Base Ass’y (FINO 20/ 25) 1 ○9007-0993-01A Data Back Door Ass’y(QD) 1 ○9007-0997-01A Back Door Ass’y(ST) 1 ○9007-0996-01A Front Cover Ass’y(FINO 30S) 1 ○9007-0999-01A Front Cover Ass’y(EPISOD 2) 1 ○9007-1000-01A Front Cover Ass’y(MAXIMA 30S) 1 ○9007-1465-01A Front Cover Ass’y(MYCAM 3) 1 ○9007-1466-01A Front Cover Ass’y(FINO 20S) 1 ○9007-1467-01A Front Cover Ass’y(MAXIMA 20S) 1 ○9007-1458-01A Front Cover Ass’y(MYCAM 30S) 1 ○9007-1463-01A Front Cover Ass’y(FINO 25S) 1 ○9007-1464-01A Front Cover Ass’y(MAXIMA 22S) 1 ○9007-1469-01A Front Cover Ass’y(SPECTRUM 20S BLUE) 1 ○9007-1468-01A Front Cover Ass’y(SPECTRUM 20S GREEN) 1 ○9007-1470-01A Front Cover Ass’y(SPECTRUM 20S PURPLE) 1 ○9007-1472-01A Front Cover Ass’y(@ teen BLUE) 1 ○9007-1471-01A Front Cover Ass’y(@ teen GREEN) 1 ○9007-1473-01A Front Cover Ass’y(@ teen PURPLE) 1 ○9007-1453-01A Front Cover Ass’y(FINO 21C BLUE) 1 ○9007-1448-01A Front Cover Ass’y(FINO 21C GREEN) 1 ○9007-1454-01A Front Cover Ass’y(FINO 21C PURPLE) 1 ○9007-1456-01A Front Cover Ass’y(FF-2 2000 BLUE) 1 ○9007-1455-01A Front Cover Ass’y(FF-2 2000 GREEN) 1 ○9007-1457-01A Front Cover Ass’y(FF-2 2000 BLUE) 1 ○9007-0911-01A Battery Cover Ass’y (FINO 30S) 1 ○9007-1452-01A Battery Cover Ass’y (BLUE, GREEN, PURPLE) 1 ○9007-1462-01A Battery Cover Ass’y (FINO 25S) 1 ○9007-0992-01A Middle Cover Ass’y (FINO 30S) 1 ○9007-1459-01A Middle Cover Ass’y (BLUE, GREEN, PURPLE) 1 ○9007-1449-01A Middle Cover Ass’y (FINO 25S) 1 ○
■ PARTS LIST
※※ NNOOTTEE9007-1462-01A : Battery Cover Ass’y (FINO 25S, MAXIMA 22S, MYCAM 30S)9007-0911-01A : Battery Cover Ass’y (FINO 20S, 30S, MAXIMA 20S, 30S, EPISOD 2,MYCAM 3)9007-0992-01A : Middle Cover Ass’y (FINO 20S, 30S, MAXIMA 20S, 30S, EPISOD 2,MYCAM 3)9007-1459-01A : Middle Cover Ass’y (FINO 25S, MAXIMA 22S, MYCAM 30S)
Ⅳ. EXPLODED VIEWS AND PART LIST
15 15
Ⅳ. EXPLO
DED
VIEWS AN
D PAR
T LIST
2. SHUTTER BASE & FRONT CO
VER ASSEMBLY
6107-0366-01A6107-0366-01A
7015-0069-02A
6003-0256-01A
9005-0112-01A9001-0567-01A
7215-0555-02A
6107-0368-04C9005-0111-01A
6107-0369-01A9005-1102-01A
5003025501A 6031-0050-01A
30030001-01A
6003-0254-01A7215-0553-01A
7215-0556-01A
7015-0070-01A
7215-0558-01A
6107-0367-01A
9761-1740-07
7215-0552-02A
7217-1430-01A
7217-1432-01A
7217-1431-01A
7217-1444-01A
7217-1435-01A
7217-1435-01A
7217-1434-01A
9761-1730-129005-0113-01A
0970-9131-01A9761-1725-07
9001-0568-01A
7215-0557-01A
1616
SupplyParts No. Parts Name Q’ty Available Remarks
Parts9055-0110-01A Shutter Base Ass’y (FINO 30S) 1 ○121-2014 Shutter Base Ass’y (FINO 20S / 25S) 1 ○9761-1735-12 Screw 4 ×9005-0112-01A Metal Plate of Solenoid Ass’y 1 ○6107-0369-01A Spring 1 ×7215-0554-01A Lens Holder Cover 1 ○6003-0255-01A Screw 1 ×6031-0050-01A Washer 1 ×3003-0001-01A Solenoid for AF 1 ○6003-0254-01A Screw 1 ×7215-0553-01A Kicket Stop 1 ○9005-0111-01A Button Arm Ass’y 1 ○7215-0555-02A Shutter Base 1 ○7215-0556-02A Shutter Locker 1 ○6107-0368-04C Release Spring 1 ×7015-0070-01A Apterure Plate 1 ×7215-0558-01A Shutter Plate 1 ×9005-0113-01A Leaf Switch Ass’y 1 ○0970-9131-01A Screw 1 ×9761-1730-12 Screw 5 ×6107-0367-01A Shutter Spring 1 ×7215-0552-02A Shutter Base Cover 1 ○9761-1740-07 Screw 2 ×9005-0112-01A Metal Plate of Solenoid Ass’y 1 ○7215-0557-01A AF Lens Holder 1 ×6107-0366-01 Lens Spring 1 ×7015-0069-02A Metal Plate of Solenoid 1 ×6003-0256-01A Screw 1 ×9006-0567-01A Print Rivet Ass’y(+) 1 ×9006-0568-01A Print Rivet Ass’y(-) 1 ×7211-0496-01A Core 1 ×9007-0996-01A Front Cover Ass’y(FINO 30S) 1 ○9007-0999-01A Front Cover Ass’y(EPISODE 2) 1 ○9007-1000-01A Front Cover Ass’y(MAXIMA 30S) 1 ○9007-1465-01A Front Cover Ass’y(MYCAM 3) 1 ○9007-1466-01A Front Cover Ass’y(FINO 20S) 1 ○9007-1467-01A Front Cover Ass’y(MAXIMA 20S) 1 ○9007-1458-01A Front Cover Ass’y(MYCAM 30S) 1 ○9007-1463-01A Front Cover Ass’y(FINO 25S) 1 ○9007-1464-01A Front Cover Ass’y(MAXIMA 22S) 1 ○9007-1469-01A Front Cover Ass’y(SPECTRUM 20S BLUE) 1 ○9007-1468-01A Front Cover Ass’y(SPECTRUM 20S GREEN) 1 ○9007-1470-01A Front Cover Ass’y(SPECTRUM 20S PURPLE) 1 ○9007-1472-01A Front Cover Ass’y(@ teen BLUE) 1 ○9007-1471-01A Front Cover Ass’y(@ teen GREEN) 1 ○9007-1473-01A Front Cover Ass’y(@ teen PURPLE) 1 ○9007-1453-01A Front Cover Ass’y(FINO 21C BLUE) 1 ○9007-1448-01A Front Cover Ass’y(FINO 21C GREEN) 1 ○9007-1454-01A Front Cover Ass’y(FINO 21C PURPLE) 1 ○9007-1456-01A Front Cover Ass’y(FF-2 2000 BLUE) 1 ○
■ PARTS LIST
Ⅳ. EXPLODED VIEWS AND PART LIST
17
Ⅳ. EXPLODED VIEWS AND PART LIST
SupplyParts No. Parts Name Q’ty Available Remarks
Parts9007-1455-01A Front Cover Ass’y(FF-2 2000 GREEN) 1 ○9007-1457-01A Front Cover Ass’y(FF-2 2000 BLUE) 1 ○9761-1725-07 Screw 4 ×7217-1430-01A Main SW Arm 1 ○7217-1431-01A Lens Cover 1 ○7217-1432-01A Lens Cover Holder 1 ○7217-1434-01A Front Cover AcryI (FINO 30S) 1 ○7217-2028-01A Front Cover AcryI (FINO 20S / 25S) 1 ○7217-2017-01A Front Cover AcryI (Green) 1 ○7217-2021-01A Front Cover AcryI (Blue) 1 ○7217-2023-01A Front Cover AcryI (Purple) 1 ○7217-1435-01A Main Switch 1 ○7217-1444-01A Front Cover (FINO 30S) 1 ×7217-1445-01A Front Cover (EPISODE 2) 1 ×7217-1455-01A Front Cover (MAXIMA 30S) 1 ×7217-2036-01A Front Cover (FINO 20S) 1 ×7217-2035-01A Front Cover (MYCAM 3) 1 ×7217-2037-01A Front Cover (MAXIMA 20S) 1 ×7217-2029-01A Front Cover (MYCAM 30S) 1 ×7217-2033-01A Front Cover (FINO 25S) 1 ○7217-2034-01A Front Cover (MAXIMA 22S) 1 ○7217-2039-01A Front Cover (SPECTRUM 20S BLUE) 1 ○7217-2038-01A Front Cover (SPECTRUM 20S GREEN) 1 ○7217-2040-01A Front Cover (SPECTRUM 20S PURPLE) 1 ○7217-2042-01A Front Cover (@ teen BLUE) 1 ○7217-2041-01A Front Cover (@ teen GREEN) 1 ○7217-2043-01A Front Cover (@ teen PURPLE) 1 ○7217-2022-01A Front Cover (FINO 21C BLUE) 1 ○7217-2018-01A Front Cover (FINO 21C GREEN) 1 ○7217-2024-01A Front Cover (FINO 21C PURPLE) 1 ○7217-2026-01A Front Cover (FF-2 2000 BLUE) 1 ○7217-2025-01A Front Cover (FF-2 2000 GREEN) 1 ○7217-2027-01A Front Cover (FF-2 2000 BLUE) 1 ○7217-1436-01A Little Front Cover (FINO 30S) 1 ○7217-2019-01A Little Front Cover (Purple, Blue, Green) 1 ○7217-2030-01A Little Front Cover (FINO 25S) 1 ○
■ PARTS LIST
18 18
Ⅳ. EXPLO
DED
VIEWS AN
D PAR
T LIST
3. VF BASE ASSEMBLY
9003-0128-01A
7213-0211-01A
7213-0211-01A
9003-0129-01A9003-0124-01A
9003-0125-01A
9003-0123-01A
0961-9003-01A
7409-0833-01A
7409-0833-01A
7013-0088-01A
7213-0215-01A
7213-0216-01A
7213-0214-01A7213-0213-01A
7213-0212-01A
6107-0365-01A
9003-0127-01A7013-0087-01A
9003-0126-01A
0609-0004-01A
9761-1750-07
9005-0112-01A
1919
Ⅳ. EXPLODED VIEWS AND PART LIST
SupplyParts No. Parts Name Q’ty Available Remarks
Parts9003-0130-01A VF Base Ass’y (FINO 30S) 1 ○121-2200 VF Base Ass’y (FINO 20S / 25S) 1 ○0609-0004-01A CdS 1 ×9761-1720-07 Screw 1 ×9761-1730-12 Screw 1 ×9761-1750-04 Screw 1 ×0961-9003-01A Screw 1 ×7213-0211-01A VF Base 1 ○7213-0215-01A G11 1 ○7213-0216-01A G12 1 ○7213-0212-02A Kicker 1 ○7213-0213-01A Sprocket LK 1 ○7409-0833-01A Mylar 2 ×7213-0214-01A G10 1 ○7013-0087-01A Counter SP Plate 1 ○7013-0088-01A Gear Cover 1 ○6107-0365-01A Kicket SP 1 ×9003-0128-01A IR LED Ass’y (FINO 30S) 1 ×9003-0129-01A SPD Ass’y (FINO 30S) 1 ×9003-0123-01A Counter-3 Ass’y 1 ○9003-0124-01A Counter-2 Ass’y 1 ○9003-0125-01A Counter-1 Ass’y 1 ○
■ PARTS LIST
20 20
Ⅳ. EXPLO
DED
VIEWS AN
D PAR
T LIST
4. EACH PARTS ASSEMBLY(1)
7017-0232-01A
7217-1438-01A
7211-0482-01A
7217-0429-01A
72110477-01A
7411-0705-01A7211-0473-01A
6107-0361-01A
7011-0339-01A
7211-0489-01A
7211-0489-01A
6107-0363-01A7011-0340-01A
7411-0706-01A
9007-0991-01A
7215-0551-01A
7011-0337-02A
9007-0111-01A
3811-0639-01A
7013-0091-01A
9003-0123-01A
9387-1600-25
7013-0090-01A
9003-0123-01A
7013-0089-01A
3811-0640-01A
9003-0123-01A
7011-0338-01A
3811-0629-01A
9003-0570-01A
7011-0338-01A
3811-0629-01A
9003-0569-01A
9001-0565-01A 9001-0566-01A
9387-1400-70
7411-0707-01A
9001-0567-01A
3811-0623-01A
7411-0707-01A
9001-0568-01A
9001-0561-01A 9001-0572-01A
7011-0337-02A
9001-0572-01A
7011-0335-01A
3811-0628-01A
9001-0562-01A
7011-0336-01A
3811-0628-01A
9001-0562-01A
2121
Ⅳ. EXPLODED VIEWS AND PART LIST
■ PARTS LIST
SupplyParts No. Parts Name Q’ty Available Remarks
Parts9007-0991-01A Battery Cover Ass’y 1 ○7217-1438-01A Battery Cover 1 ×7017-0232-01A Battery Plate 1 ×9001-0561-01A Rewind Gear Ass’y 1 ○7211-0473-01A Rewind Gear-10 Claw 1 ×6107-0361-01A Rewind Gear-12 SP 1 ×7211-0482-01A Rewind Gear-12 1 ×9001-0572-01A Film Presser Ass’y 1 ×7217-0429-01A Film Presser Plate 1 ○7411-0705-01A Film Presser Rivet 1 ○9001-0562-01A Rewind SW 1 ○7011-0337-01A Rewind Switch Contact 2 ×7211-0477-01A Rewind SW 1 ×9001-0563-01A Rewind Contact Ass’y(UP) 1 ×7011-0335-01A Rewind Contact(UP) 1 ×3811-0628-01A Lead Wire 1 ×9001-0564-01A Rewind Contact Ass’y(DOWN) 1 ×7011-0336-01A Rewind Contact(DOWN) 1 ×3811-0628-01A Lead Wire 1 ×9005-0111-01A Button Arm Ass’y 1 ○7215-0551-01A Button Arm 1 ×7011-0337-02A Rewind Switch Contact 2 ×9001-0565-01A Spring Plate Ass’y 1 ○7011-0339-01A Gear Plate 1 ×7211-0489-01A G6 1 ×7011-0340-01A Spring Plate 1 ×7411-0706-01A Rewind RT 1 ×9001-0566-01A Ciunter Ass’y 1 ×7211-0495-01A Counter Gear 1 ○6107-0363-01A Counter Spring 1 ×9001-0567-01A Print Rivet Ass’y(+) 1 ×7411-0707-01A Print Rivet 1 ×9387-1700-07 Lead Wire 1 ×9001-0568-01A Print Rivet Ass’y(-) 1 ×7411-0707-01A Print Rivet 1 ×3811-0623-01A Lead Wire 1 ×9003-0123-01A Counter-3 Ass’y 1 ×7013-0091-01A Contact-3 1 ○3811-0639-01A Lead Wire 1 ×9003-0124-01A Counter-2 Ass’y 1 ×7013-0090-01A Contact-2 1 ○9387-1600-25 Lead Wire 1 ×9003-0125-01A Counter-1 Ass’y 1 ×7013-0089-01A Contact-1 1 ○3811-0640-01A Lead Wire 1 ×9001-0570-01A Battery Contact Ass’y(-) 1 ×7011-0338-01A Battery Contact 1 ○3811-0629-01A Lead Wire 1 ×9001-0570-01A Battery Contact Ass’y(+) 1 ×7011-0338-01A Battery Contact 1 ○3811-0630-01A Lead Wire 1 ×
22 22
Ⅳ. EXPLO
DED
VIEWS AN
D PAR
T LIST
5. EACH PARTS ASSEMBLY(2)
9761-1750-129387-1100-75
9001-0573-01A
9387-2300-35 0998-1955-01A
3811-0626-01A
3811-0632-01A
3811-0633-01A
3811-0634-01A3811-0637-01A
3811-0637-01A
3811-0637-01A
3811-0636-01A
3811-0635-01A
3811-0623-01A7014-0027-01A9387-1301-40
9387-1400-70
0601-0034-01A- + 0605-0015-01A
- +
0613-0002-01A 0611-0021-01A
- +
0601-0033-01A3408-0006-01A
- +
7211-0478-01A
7211-0481-01A
9001-0575-01A
9001-0574-01A
9003-0127-01A 9003-0128-01A 9003-0129-01A 9004-0140-01A
9001-0573-01A 9001-0575-01A 9003-0126-01A 9005-0113-01A
2323
Ⅳ. EXPLODED VIEWS AND PART LIST
■ PARTS LIST
SupplyParts No. Parts Name Q’ty Available Remarks
Parts9001-0574-01A Motor Ass’y 1 ○○7211-0478-01A Motor Base Plate 1 ○9001-0573-01A Motor & Wire Solder 1 ○○3811-0626-01A Lead Wire 1 ×9387-2300-35 Lead Wire 1 ×9001-0575-01A Motor & Motor Gear Ass’y 1 ○○7217-0481-01A Film Motor Gear 1 ×0998-1955-01A Film Motor 1 ×9005-0113-01A Leaf Switch Ass’y 1 ○○3811-0637-01A Lead Wire 1 ×3408-0009-01A Leaf Switch 1 ×9003-0126-01A Red-eye LED Ass’y 1 ××0601-0033-01A Red-eye LED 1 ○3811-0634-01A Lead Wire 1 ×3811-0637-01A Lead Wire 1 ×9003-0127-01A Ready LED Ass’y 1 ××0601-0034-01A Ready LED 1 ○9387-1100-75 Lead Wire 1 ×3811-0632-01A Lead Wire 1 ×9003-0128-01A IR LED Ass’y 1 ×× AF3811-0623-01A Lead Wire 1 × AF9387-1400-70 Lead Wire 1 × AF0605-0015-01A IR LED 1 × AF9003-0129-01A SPD Ass’y 1 ×× AF3811-0623-01A Lead Wire 1 × AF9387-1400-07 Lead Wire 1 × AF0610-0002-01A SPD 1 × AF9004-0140-01A Flash Ass’y 1 ××7014-0027-01A Flash Refector 1 ×0611-0021-01A Flash Tube 1 ○3811-0635-01A Lead Wire 1 ×3811-0636-01A Lead Wire 1 ×
24 24
Ⅳ. EXPLO
DED
VIEWS AN
D PAR
T LIST
6. MIDDLE & BACK CO
VER ASSEMBLY(ST)
7211-0497-01A
7017-0230-01A
7411-0708-01A
7017-0231-01A
9761-1720-07
7217-1427-01A
7217-1441-01A
7217-1441-01A
7217-1428-01A
7409-0834-01A
9007-0997-01A 9007-0992-01A
2525
Ⅳ. EXPLODED VIEWS AND PART LIST
■ PARTS LIST Supply
Parts No. Parts Name Q’ty Available RemarksParts
9009-0992-01A Middle Cover Ass’y (FINO 20S / 30S) 1 ○○9009-1449-01A Middle Cover Ass’y (FINO 25S) 1 ○○9009-1459-01A Middle Cover Ass’y (Blue, Green, Purple) 1 ○○7217-1441-01A Middle Cover (FINO 30S) 1 ○7217-2020-01A Middle Cover (Blue, Green, Purple) 1 ○7217-1441-01A Middle Cover (FINO 25S) 1 ○7217-1428-01A Counter Window 1 ×9007-0997-01A Back Door Ass’y (FINO 20S/25S/30S) 1 ○○ SSTTDD9007-1451-01A Back Door Ass’y (Blue, Green, Purple) 1 ○○ SSTTDD7217-1442-01A Back Door 1 ×7217-1427-01A Film Window 1 ×7409-0834-01A Film Window RB 1 ×7411-0708-01A Rivet 2 ×7017-0231-01A Film Press 1 ×7017-0230-01A Plate Spring 1 ×7211-0497-01A Film Press Plate 1 ○9761-1720-07 Screw 1 ×
26 26
Ⅳ. EXPLO
DED
VIEWS AN
D PAR
T LIST
7. BACK COVER ASSEM
BLY(QD)
6003-0254-01A 6107-0370-01A
6107-0372-01A
6107-0371-01A
7411-0708-01A
7017-0231-01A
7217-1437-01A7217-1433-01A
6003-0247-01A
6003-0254-01A
6003-0249-01A
5900-0067-01A
7017-0230-01A
7017-0230-01A
7411-0709-01A
7211-0497-01A
7217-1427-01A
7409-0834-01A
9375-2025-10
7309-0313-01A
7217-1439-01A
9761-1720-07
9007-0994-01A9007-0993-01A
9007-0995-01A
2727
Ⅳ. EXPLODED VIEWS AND PART LIST
■ PARTS LIST
SupplyParts No. Parts Name Q’ty Available Remarks
Parts9007-0993-01A Data Back Door Ass’y (FINO 20S/25S/30S) 1 ○○ QQDD9007-1450-01A Data Back Door Ass’y (Blue, Green, Purple) 1 ○○ QQDD9735-2025-10 Lithum Battery 1 ×9761-1730-12 Screw 5 ×7217-1427-01A Film Window 1 ×7409-0834-01A Film Window RB 1 ×7217-1439-01A Data Back Door 1 ×7411-0708-01A Rivet 2 ×9007-0994-01A DM Holder Ass’y 1 ○○6003-0247-01A Screw 1 ×6003-0249-01A Screw 1 ×6003-0254-01A Screw 1 ×5900-0067-01A Data Module 1 ○7017-0230-01A Plate Spring 1 ×7211-0497-01A Film Press Plate 1 ○7217-1433-01A DM Holder 1 ○7017-0233-01A Battery Contact 1 ×7411-0709-01A Date Print RT 2 ×6107-0370-01A Print Contact(1) 1 ×6107-0371-01A Print Contact(2) 1 ×6107-0372-01A Battery Contact 1 ×9007-0995-01A Battery Cover Ass’y 1 ○○9761-1720-07 Screw 1 ×7017-0231-01A Film Press 1 ×7217-1437-01A Battery Cover 1 ×
2828
Ⅴ. TROUBLESHOOTING
● The way of Using This Chapter1) Search for badness contents and reasons.
2) Finding at the exact check point, and fundamental reasons, repair them.
3) The contents which is written here are regarded as particial principles, not
but general principles.
Cautions1) Be careful that the input voltage is 3 volts while checking the voltage.
(In advance, confirm the source of electric power by checking 2 parts)
2) Be careful that you should not make a scar on the operation pattern while checking theoperation parttern(Keep it as soon as possible)
3) Needs to pay attention to the welding connected part while disasembling the F-PCB
You have to discharge before disassembled the camera.
Troubleshooting ProcedureSearch for the defect causes according to the following procedure.
Check the battery voltage(3V)
Ascertain defect
Visual checking after disassembling the cover(The welding and Lead wire state)
Use the suitable items of problem solving
2929
Ⅴ. TROUBLESHOOTING
1. Charging system
No. Problem Reason Resolve Method
1 Crack sound a.Dry joint flash wire a.Re-soldering
b.Dry joint capacitor b.Re-soldering
2 Flash Intermittence Trigger coil T2 damaged Replace T23 No flash a.Trigger coil T2 damaged a.Replace T2
b.TH1 damaged b.Replace TH1c.D6(SR-96P)damaged c.Replace D6d.C4(0.02㎌)damaged d.Replace C4e.Leaf switch missed contact: e.1.The Kicker on the viewfinder 1.Replace the kickerholder is too tight.
2.Shutter blade deformed 2.Replace the shutter blade4 Fail to charge a.D5 damaged a.Replace D5
b.Q6(2SD879)damaged b.Replace Q6c.Transformer T1 damaged c.Replace T1d.Charge only once:R11(3K) d.Replace R11 or Q6 or T1Q6(2SD965) or T1 damaged
5 Red-eye reduction lamp a.Dry joint CdS a.Re-solderingfailure b.Dry joint in R1,R2,R4,R5 b.Re-soldering
c.Dry joint or damaged in Q1 c.Replace or re-soldering Q1(2SC2412K)
d.Dry joint or damaged in Q3 d.Replace or re-soldering Q3(2SC2412K)
6 LED Failure(Charging is a.Shooting-ready LED light up a.Re-soldering the wiresOK) always:wrong wring
b.Shooting-ready LED not light b.Replace the LED lampup:LED damaged
7 Power always on Deformed in leaf switch Use a pair of tweezers to adjust it tooriginal shape
8 Charging during Q8 damaged Replace Q8fransportation
9 Flash always fire a.Short circuit of SYNC SW a.Remove the portion of solder thatcaused the short
b.Short circuit of CdS and b.Remove the portion of solder thatnearby cooper foil caused the short
c.CdS damaged c.Replace CdSd.Q3 damaged d.Replace Q3
3030
Ⅴ. TROUBLESHOOTING
2. Other systems.
No. Problem Reason Resolve Method
1 Rewinding failure Poor contact or deformed Dismantle the PCB, and use a pair of
rewinding switch plate tweezers to fix the rewinding switch
plate
2 Hight electricity a.Motor itself consumes too much a.Replace motor
consumption b.Tight motor gear b.Use a knife to adjust the motor gear
to right mesh
c.Tighten motor holder
3 Odd sound when Damaged gear or motor Dismantle the viewfinder holder, and
winding and rewinding produces odd sound check from the first gear(motor gear)
to find the damaged gear and replace it.
4 No reaction a.Poor contact on rewind SW a.Dismantle PCB, and bend the rewind SW
b.Short circuit in sprocket b.Re-assemble
contact or poor assembly
c.Release lever not returning to c.Check if release lever is blocked by
right position solder or CdS
d.Short circuit on DM“+” d.Remove the portion of solder that
contact and electric wire caused the short“+”contact
and wire
e.Dry joint C1 e.Re-soldering it
f.Damaged or dry joint Q5,Q6, f.Replace or re-soldering damaged
Q7,D5 parts
5 Rewinding only, no a.Rewinding gear can move:gear a.Dismantle the viewffinder holder
winding or winding only, plate assembly locked too tight and loos eassembly screw a
no rewinding bit(not too loose)
b.Rewinding gear can move:gear b.Replace the gear
broken(white small gear)
6 Winding move more Sprocket plate deformed Replace it
tham one frame
3131
Ⅴ. TROUBLESHOOTING
3. AF system
4. Counter and date imprint system.
No. Problem Reason Resolve Method
1 Wrong AF at Near a.SPD split a.Re-set up SPD with epoxy
(Solenoid not releasing) b.Poor/wrong soldering in IR LED b.Re-soldering
c.IR LED not in right position c.Push it to right position
d.Damaged IR LED or AF IC d.Replace IR LED or AF IC
2 Wrong AF at Far a.Far distance between solenoid a.Pass solenoid upward a bit
(Solenoid not attractive) and Lens holder
b.Solenoid’s position too high b.Move solenoid a bit downward
causing wrong iron plate angle
3 Wrong collimaton Poor adjustment Re-collimate
No. Problem Reason Resolve Method
1 Poor/Wrong counter Counter plate deformed Bend the plate or replace it
advancement
2 Counter can not Counter blocked by wire Dismantle front cover and set up
automatic reset to“S” spring and wires
3 No showing on date a.Defective poor module a.Replace DM
module b.Poor soldering b.Re-soldering DM
c.Battery drained out c.Replace battery
4 Damaged print tube Replace DM
DM:Date Module
top related