hafiz a waheed portfolio 2
Post on 22-Jan-2017
70 Views
Preview:
TRANSCRIPT
1
• Demonstrated over three years of dedicated experience in a key role in large scale structural engineering projects.
• Structural analysis with software (EUROBEAMS, STAAD PRO (QSE),SAFE, ETABS, PROKON,ROBOT) drawing with AutoCAD & REVIT.
• Able to design base isolated structures.• Designed projects included commercial, leisure & residential.• Following some examples highlighted the projects.
HAFIZ A WAHEED STRUCTUR ENGINEER
PORTFOLIO
2
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Client: BP Oil UK Ltd Asset Development.
Project Details:This was a two-storey, 367m2 floor space, new Marks & Spencer Store located on an open plot owned be BP Oil UK Ltd. The store building was to be designed of steel frame structure.
Personal input to project: The building went through two major design changes and each time I was required to aid the recalculation of structural elements along with producing new general arrangement drawings and constant liaison with the architect.
2016 – New Build Mark & Spencer Store in Cheadle.
Proposed Roof Plan
PROJECT: 1
3
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Euro-beams calculations for structural elements.
4
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Euro beams calculations for one of the beam
5
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Elevation 1 showing steel frame structure
6
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Elevation 2 showing columns, beams and restraints.
7
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Elevation 3 showing columns, beams and restraints
8
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Client: Regency Homes Ltd.
Project Details:This is ongoing multi storey Hatton Cross Hotel project with basement parking and G+6 floors above at Heathrow Airport in London. This development consisting of 583 bedrooms with associated dining and conferencing facilities. The site is predominantly affected by noise from aircraft arriving at and departing from Heathrow Airport which influenced the external façade design.
Personal input to project: I work with three senior structural engineer and two senior CAD technician. My involvement is to prepare design calculation for the slabs, basement parking, ground floor and typical floors above. I have prepared a 3D model for worse case slab segment and analyse with CSI SAFE and check the short and long term deflections. And prepared foundation plan and pile cap drawings with rebar detail.
2016 – New Build Multi Storey Hatton Cross
at Heathrow Airport.
3D Model of Hatton Cross Hotel
PROJECT: 2
9
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Parking Roof Slab Analysis with CSI SAFEDeflections (Elastic & Long-term) according to EC2
Parking Roof Slab Analysis with CSI SAFEDeflections (Elastic & short-term) according to EC2
10
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Preliminary structural scheme sectionBasement section overview.
11
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Proposed Foundation PlanPile cap drawings with rebar detailing
12
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Pile cap drawings with rebar detailingPile cap drawings with rebar detailing
13
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Pile cap drawings with rebar detailing
14
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Pile cap drawings with rebar detailingPile cap drawings with rebar detailing
15
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Client: Pellings Architecture Ltd
Project Details:This was a single story extension at left side of the existing house. And there was a existing drainage under.
Personal input to project: The site was visited by me and collected relevant information about the existing structure and drainage. It was recommended that soil test should be done before proposed any scheme for the extension. It has been found that only pile foundation has to be proposed due to soil condition. I was required to prepare all calculations and drawings with details. Two proposal have been produced and one of them was accepted by client.
2016 – Single Story Extension at Key Road, London
Foundation Plan with rebar detailing
PROJECT: 3
16
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Proposed foundation and drainage planSite plan with existing drainage.
17
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Cross-section of ground beam with rebar detailCross-section detail for foundation
18
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Client: Richard Sears
Project Details:This was a new build single storey garage block with car stack system in basement.
Personal input to project: I was required to co-ordinate with senior engineer to aid the calculation of structural elements along with producing general arrangement drawing and liaison with architect.
2016 – New Build Garage Block in Cambridgeshire.
Cross-section of structural scheme including foundation
PROJECT: 4
19
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Proposed foundation plan
20
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Proposed ground floor plan
21
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Cross-section detail for structure and foundation
22
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Cross-section detail for back area Cross-section detail for entrance area
23
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
COST – Dh 2.28 million (AED)PROJECT:PROTOSED G+1 VILLA ON PLOT NO: 4220196 TOTAL AREA 8126.00 SQ.FT AT AL-WARQA SECOND, DUBAI.CLINENT: REHANA MOHAMMAD NASRUDDIN FADHLUDDIN.Personal input to project: • Structural analysis & design with FEM software CSI ETABS using British
Standard (BS 8110 – 1997).• All the slabs (Solid and Ribbed) analysis & design with CSI SAFE using
BS8110 – 1997.• Critical structural elements (Foundation, Ribs of the Ribbed Slab &
Beams with long span and bearing more loads) analysis & Design with PROKON using BS8110 – 1997.
• Generating the structural detailed drawings - Structural design.
Technical features:
• Concrete structure. • Every structural element respecting the capacity design rules. • Pad foundations on the 95% compacted soil 1.2 – 1.5 meter depth
according to soil test report.• Columns Positioning according to all floors architectural drawings.(Key
point is priority given to architectural design)
2014 –PRIVATE VILLA AL-WARQA SECOND, DUBAI.
3D Model with CSI Etabs
PROJECT: 5
24
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Columns Analysis & Design for base to full height of structure
Beams Analysis & Design for first floor
25
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Columns Positioning according to all floors architectural drawings.(Key point is priority given to architectural design)
Architectural Front Elevation with different levels shown.
Stress Analysis for the whole frame structure just to check there is no abnormality in the structure.
Restraint Reaction forces at Footings play the key role to design footings accordingly.
26
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
First Floor Slab rebar analysis for direction 2 bottom rebar according to BS8110 - 1997
First Floor Slab rebar analysis for direction 2 top rebar according to BS8110 - 1997
First Floor Slab rebar analysis for direction 1 bottom rebar according to BS8110 - 1997
First Floor Slab Analysis with CSI SAFEDeflections (Elastic & Long-term) according to BS8110 - 1997
27
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Footing analysis and design with PROKON, input all relevant data to check safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS) & SF Uplift (ULS) etc.
Check analysis for safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS), SF Uplift (ULS), Punching shear and linear shear at x,ydirections according to BS8110 - 1997
Footing analysis and design with PROKON, input all relevant data to check safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS) & SF Uplift (ULS) etc.
Check analysis for safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS), SF Uplift (ULS), Punching shear and linear shear at x,ydirections. according to BS8110 - 1997
28
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Slab’s Rib analysis and design with CSI SAFE input parameters according to BS 8110 - 1997
Slab’s Rib analysis and design with CSI SAFE input loads according to BS 8110 - 1997
Slab’s Rib analysis and design with CSI SAFE view Elastic Deflection according to BS 8110 - 1997
Slab’s Rib analysis and design with CSI SAFE view Long-term Deflectionaccording to BS 8110 - 1997
Slab’s Rib analysis and design with CSI SAFE view Shear Force and Moments Diagrams according to BS 8110 - 1997
29
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Slab’s Rib analysis and design with CSI SAFE view Shear and bending steel according to BS 8110 - 1997Architectural Front Elevation
Architectural Ground Floor Plan with accessories
Architectural Cross Section A-A with Parapet detail.
30
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
2013 – RESIDENTIAL BUILDING, AL-MIRDIF, DUBAI
3D Model with CSI Etabs
PROJECT: 6
COST – Dh 7.39 million (AED)PROJECT:PROTOSED G+3 BUILDING ON TOTAL AREA 15657.00 SQ.FT AT AL-MIRDIF, DUBAI.CLINENT: HASSAN ALI FARDANPersonal input to project: • Structural analysis & design with FEM software CSI ETABS using British
Standard (BS 8110 – 1997) considered wind loads according to BS 6399-95 but did not use special seismic design data.
• All the slabs analysis & design with CSI SAFE using BS8110 – 1997.• Critical structural elements (Foundation, Ribs of the Ribbed Slab &
Beams with long span and bearing more loads) analysis & Design with PROKON using BS8110 – 1997.
• Generating the structural detailed drawings - Structural design.
Technical features:
• Concrete structure. • Every structural element respecting the capacity design rules. • Pad foundations on the 95% compacted soil 1.2 – 1.5 meter depth
according to soil test report.• Considered 250mm thick solid slab for all floors excluding Ground floor.• Columns Positioning according to all floors architectural drawings.(Key
point is priority given to architectural design)
31
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
3D Model without extrusion of elements
Columns Analysis & Design for base to full height of structure
32
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
First Floor Slab Analysis with CSI SAFEDeflections (Elastic & Long-term) according to BS8110 -1997
Second Floor Slab Analysis with CSI SAFEDeflections (Elastic & Long-term) according to BS8110 - 1997
Third Floor Slab Analysis with CSI SAFEDeflections (Elastic & Long-term) according to BS8110 - 1997
33
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Restraint Reaction forces at Footings play the key role to design footings accordingly.
Tie Beams Analysis & Design for Ground floorShear wall analysis & design to full height.
34
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
2014 – PRIVATE VILLA, AL-KHAWANEEJ 1ST, DUBAI
3D Model with CSI Etabs
PROJECT: 7
COST – Dh 1.55 million (AED)PROJECT:PROPOSED GROUND VILLA ON PLOT NO: 281-6503 AREA 5867.00 SQ.FT AT AL-KHAEANEEJ FIRST, DUBAI.CLINENT: MOAZA MOHAMMED ABDULRAHMAN AL QUFAIDI.Personal input to project: • Structural analysis & design with FEM software CSI ETABS using British
Standard (BS 8110 – 1997).• All the slabs (Solid and Ribbed) analysis & design with CSI SAFE using
BS8110 – 1997.• Critical structural elements (Foundation, Ribs of the Ribbed Slab &
Beams with long span and bearing more loads) analysis & Design with PROKON using BS8110 – 1997.
• Generating the structural detailed drawings - Structural design.
Technical features:
• Concrete structure. • Every structural element respecting the capacity design rules. • Pad foundations on the 95% compacted soil 1.2 – 1.5 meter depth
according to soil test report.• Columns Positioning according to all floors architectural drawings.(Key
point is priority given to architectural design)
35
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Front Elevation
Architectural Ground Floor Plan
36
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Structural Drawing for Columns layout, Sections and rebar detail.
Structural Drawing for Foundation layout & rebar schedule.
Structural Drawing for Tie beams and wall footings layout & Sections with rebar schedule.
37
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Structural Drawing for Roof Slab Framing layout (Beams, Solid Slab, Ribbed Slab’s sections and rebar detail.)
Structural Typical Drawing
38
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
2014 – PRIVATE VILLA, AL-MIZHAR 2ND, DUBAI
3D Model with CSI Etabs
PROJECT: 8
COST – Dh 1.86 million (AED)PROJECT:PROPOSED G+1 VILLA AND SERVICE BLOCK ON PLOT NO: 263-1434 TOTAL AREA 6692.00 SQ.FT AT AL-MIZHAR SECOND, DUBAI.CLINENT: SUMAIA, NADA, ASMA MOHAMMED AHMAD ALI AL-HAJJI.Personal input to project: • Structural analysis & design with FEM software CSI ETABS using British
Standard (BS 8110 – 1997).• All the slabs (Solid and Ribbed) analysis & design with CSI SAFE using
BS8110 – 1997.• Critical structural elements (Foundation, Ribs of the Ribbed Slab &
Beams with long span and bearing more loads) analysis & Design with PROKON using BS8110 – 1997.
• Generating the structural detailed drawings - Structural design.
Technical features:
• Concrete structure. • Every structural element respecting the capacity design rules. • Pad foundations on the 95% compacted soil 1.2 – 1.5 meter depth
according to soil test report.• Columns Positioning according to all floors architectural drawings.(Key
point is priority given to architectural design)
39
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Front Elevation
Architectural Ground Floor Plan
Columns Positioning according to all floors architectural drawings.(Key point is priority given to architectural design)
40
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Columns Analysis & Design for base to full height of structure
Beams Analysis & Design for first floor
3D model with Restraint Reaction forces at Footings play the key role to design footings accordingly.
41
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
First Floor Slab Analysis with CSI SAFE Deflections (Elastic & Long-term) according to BS8110 - 1997
Restraint Reaction forces at Footings play the key role to design footings accordingly.
42
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
2014 – PRIVATE VILLA, AL-MANARA, DUBAI.
3D Model with CSI Etabs
PROJECT: 9
COST – Dh 1.38 million (AED)PROJECT:PROPOSED GROUND VILLA ON PLOT NO: 3630366 TOTAL AREA 4205.00 SQ.FT AT AL-MANARA, DUBAI.CLINENT: YAHYA GHARIB HAMAD KHALFAN BIN JARSHPersonal input to project: • Structural analysis & design with FEM software CSI ETABS using British
Standard (BS 8110 – 1997).• All the slabs(Solid and Ribbed) analysis & design with CSI SAFE using
BS8110 – 1997.• Critical structural elements (Foundation, Ribs of the Ribbed Slab &
Beams with long span and bearing more loads) analysis & Design with PROKON using BS8110 – 1997.
• Generating the structural detailed drawings - Structural design.
Technical features:
• Concrete structure. • Every structural element respecting the capacity design rules. • Pad foundations on the 95% compacted soil 1.2 – 1.5 meter depth
according to soil test report.• Columns Positioning according to all floors architectural drawings.(Key
point is priority given to architectural design)
43
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Columns Analysis & Design for base to full height of structure
Beams Analysis & Design for first floor Beams Analysis & Design for virtual Roof floor
44
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
First Floor Slab Analysis with CSI SAFE Deflections (Elastic & Long-term) according to BS8110 - 1997
Restraint Reaction forces at Footings play the key role to design footings accordingly.
Stress Analysis for the whole frame structure just to check there is no abnormality in the structure.
45
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Footing analysis and design with PROKON.Bending schedule parameters
Check analysis for safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS), SF Uplift (ULS), Punching shear and linear shear at x,y directions according to BS8110 -1997
Footing analysis and design with PROKON, input all relevant data to check safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS) & SF Uplift (ULS) etc.
46
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Front Elevation
Architectural Ground Floor Plan3D model with Restraint Reaction forces
47
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
2013 – COMMERCIAL BUILDING, AL-JUMERA, DUBAI
3D Model with CSI Etabs
PROJECT: 10
COST – Dh 14.85 million (AED)PROJECT:PROPOSED G+3+TOWER BUILDING ON TOTAL AREA 23565.00 SQ.FT AT AL-JUMERA, DUBAI.CLINENT: ABDUL AZIZ GHULAM LENJAWIPersonal input to project: • Structural analysis & design with FEM software CSI ETABS using British
Standard (BS 8110 – 1997) considered wind loads according to BS 6399-95 but did not use special seismic design data.
• All the slabs analysis & design with CSI SAFE using BS8110 – 1997.• Critical structural elements (Foundation, Ribs of the Ribbed Slab &
Beams with long span and bearing more loads) analysis & Design with PROKON using BS8110 – 1997.
• Generating the structural detailed drawings - Structural design.
Technical features:
• Concrete structure. • Every structural element respecting the capacity design rules. • Raft foundations on the 95% compacted soil 2 – 2.5 meter depth from
natural ground level according to soil test report.• Considered 250mm thick solid slab for all floors excluding Ground floor.• Columns Positioning according to all floors architectural drawings.(Key
point is priority given to architectural design)
48
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Restraint Reaction forces at Footings play the key role to design footings accordingly.
3D model with Restraint Reaction forces at Footings
3D Model without extrusion of elements
49
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Columns Analysis & Design for base to full height of structure
Columns Analysis & Design assign output colours range window
50
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Beams Analysis & Design for first floor
Beams Analysis & Design for second floor
3D VIEW DIAPHRAGMS
Stress Analysis for the whole frame structure just to check there is no abnormality in the structure.
51
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Footing analysis and design with PROKON.Bending schedule parameters
Check analysis for safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS), SF Uplift (ULS), Punching shear and linear shear at x,y directions according to BS8110 -1997
Footing analysis and design with PROKON, input all relevant data to check safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS) & SF Uplift (ULS) etc.
52
HAFIZ A WAHEED STRUCTURAL ENGINEER PORTFOLIO
Footing analysis and design with PROKON.Bending schedule parameters
Check analysis for safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS), SF Uplift (ULS), Punching shear and linear shear at x,ydirections according to BS8110 - 1997
Footing analysis and design with PROKON, input all relevant data to check safety factor overturning (SLS), SF overturning (ULS), SF Slip (ULS) & SF Uplift (ULS) etc.
top related