herr's pretzels team 3 kaizhong duan, olaf schwinsberg ji woo heu, myung-eui hong win naing soe

Herr's Pretzels

Team 3Kaizhong Duan, Olaf Schwinsberg Ji Woo Heu, Myung-eui HongWin Naing Soe

Contents

1. Introduction

2. Problems definition

3. Solutions

4. Additional Research & Suggestion

Introduction

1. Introduction—Herr’s History

Now, Herr Foods is a leader in the snack food industry

To keep in step with consumer demand, Herr's® began producing a number of new products in 1976

Herr's® embarked on a packaging venture that helped revolutionize the company's sales in 1964

The Herr Foods story began in 1946, founded by James Stauffer Herr

Problems & Challenges definition

Ingredients are measured and poured by hand. A operational challenge could be caused by the technical issue of not having automated equipment for this procedure. Not only does this waste time and increase unneeded labor costs, but it decreases the ability to control sanitation and accuracy.

2. Problem/Challenge #1

2. Problem/Challenge #2

Herr’s offers an array of pretzel types, all made in the same factory. The machinery required to make different pretzels varies from type to type, creating a technical problem of switching production equipment based on the need for each pretzel variation.

2. Problem/Challenge #3

The pretzels remain on a leavening conveyor for “20 – 25 minutes” which allows the doe to rise. This seems like a too long of a time and can be shortened to reduce production time through use of a more effective leavening agent which would also reduce the size of the conveyor, creating more space and saving energy.

2. Problem/Challenge #4

The video states that only about 50% of the salt applied to the pretzels adheres the first time. Though remaining salt is recycled into the process, this is very inefficient technical problem that wastes time and capital.

2. Problem/Challenge #5

The baking chamber is anywhere between 72 and 100 feet long and uses 17-20 depending on the product. An enormous oven like this takes up space and is very expensive to cook with

Solution

3. Solution: Problem #1

Automated mixer with hoses on the top that automatically pours required ingredients into the mixer.

Allows for more accurate measurements

More sanitary

Saves time and decreases manual labor

3. Solution: Problem #2

Five Separate Compartments with their own separate augment system that pushes the dough into separate die plates.

This solution is effective because it removes the need to switch production equipment.

Simple and stable way that fits their need to make their different types of pretzels.

3. Solution: Problem #3

A faster and more efficiently moving conveyor belt.

Can make it so that the Pretzels can move on to the next process as soon as the doe has risen (Can take less than 15mins).

• Compared to the 20~25min it took before.

Drastically reduces production time.

3. Solution: Problem #4

A machine that applies salt more efficiently by detecting the space and gaps between the pretzels.

Reduces the amount of salt that falls through the empty space between the pretzels.

More salt will be applied onto the pretzels.

Reduces the total amount of salt that is being poured, and in turn, reduces the amount of salt that needs to be recycled.

Saves time, saves salt, and may even be able to remove the “recycling salt” process entirely.

3. Solution: Problem #5

Use a shorter oven that’s around 40-50ft long.

Instead of using 17~20 burners, use a few burners that are a lot more efficient and powerful.

Reduces the time of the pretzel that are spent inside the oven.

Saves costs in terms of equipment.

Additional Research

4. Additional Research

For operational challenges and solutions:

Adjusting HACCP(Hazard analysis and critical control points ) to Herr’s pretzels’ process

4. Additional Research

For operational challenges and solutions:

Adjusting ISO 22000 to Herr’s pretzels’ process

(ISO 22000  is a standard developed by the International Organization for Standardization dealing with food safety. )

4. Additional Research

For operational challenges and solutions:

Referring to SPC Group’s quality management system

1. Auto Body Clean system

2. Double refinement system

3. X-ray inspector

4. Integrated Quality Management

Additional Suggestion

5. Additional Suggestion

Since the whole process of production is high standardized

Six Sigma–Driven by understanding customer needs & use of facts, data and statistical methods

Benefits: minimizing defects and variability in the process

5. Additional Suggestion

Since the whole process of production is high standardized

Control chart

Benefit: monitoring errors occurs in process and control process performance

5. Additional Suggestion

Forecasts are critical inputs to business plans, Specifically for food mamufactor

Demand managing & Forecasting

By using CPFR (Collaborative Planning, Forecasting, and Replenishment) system

Benefit: reduceing manufactory and inventory cost

5. Additional Suggestion

Inventory managing

By using ABC Analysis and RFID technology

Benefits:increasing suctomer satisfaction and profitability