introduÇÃo - unicampem524/textos_transparencias/cap_1/aula-1.pdf · uma vez conhecido duas...
Post on 25-Nov-2018
230 Views
Preview:
TRANSCRIPT
1
INTRODUÇÃO
• Fenômenos de Transporte: estuda como massa, quantidade de movimento, calor e outras formas de energia são transportadas por um meio sólido ou continuamente deformável.
Mecânica dos Fluidos
Transferência de Calor (massa)
Termodinânica
Transporte de grandezas em meios continuamente deformáveis ou sólidos
Define relação entre propriedades (P, T, U, H, S, V etc) para sistemas em equilíbrio.
Pro
prie
dade
s
T
erm
odin
âmic
as
Estados de uma substânciasimples
Uma vez conhecido duas propriedadesde uma substância simples, todas as outras propriedades podem ser determinadas: densidade, energia interna, entalpia, entropia, calor específico, coeficiente de expansão, velocidade do som, etc.
2
• O transporte de quantidade de movimento (velocidades),
turbulência, calor (temperatura), massa (concentração) e
outras grandezas deve-se ao campo de velocidades
• Fluido é um meio que se deforma continuamente quando sujeito a uma tensão.
• Uma camada de fluido desliza sobre a outra e a razão entre a tensão aplicada e a taxa de deformação é a viscosidade do fluido
3
Applications of Thermal-Fluid SciencesApplications of ThermalApplications of Thermal--Fluid SciencesFluid Sciences
Power plants
The human bodyAir-conditioning
systemsAirplanes
Car radiators Refrigeration systems
Thermal-Fluid SciencesThermalThermal--Fluid SciencesFluid Sciences
Water heater, Shower
Electric or gas range
Heating / air-conditioning
Refrigerator
TV, VCR set
Humidifier
Sprinkler system
8
Naval Architecture/Ocean EngineeringNaval Architecture/Ocean Engineering
Aerospace EngineeringAerospace Engineering
9
Microprocessor EngineeringMicroprocessor Engineering
Chemical/Petroleum Plant EngineeringChemical/Petroleum Plant Engineering
10
Agricultural Agricultural EngineeringEngineering
Air Conditioning and Air Conditioning and Refrigeration EngineeringRefrigeration Engineering
11
• Turbina a gás para propulsão
Compressão, Combustão e Expansão
Requer conhecimentos de Mecânica dos Fluidos, Transferência de Calor eTermodinâmica
• Módulo combinado de eletricidade e vapor; 4x16,4 MW (ind. TextilIndonésia - Tuma Turbomach)
• Ciclo combinado que oferecem calor e eletricidade para fábricas. Com um único eixo do gerador para as duas turbinas pode-se reduzir os custos da planta significativamente eliminando-se a necessidade de um gerador extra e custos civis.
12
Dimensions and UnitsDimensions and Units
• Primary (Fundamental)
• Dimensions: Mass (or Force), Length, Time,
Temperature
• Secondary (Derived) Dimensions
• Force (or Mass), Velocity, Pressure, Volume, Density, Energy, etc.
UnitsUnits
• Two systems will be used heavily
1. The International System (known as the SI system from its French title -- see text).
2. The US Customary System (USCS). (also known as the inch-pound [IP] system and the EnglishEngineering System).
13
SI (International System)SI (International System)
• Mass -- kilogram (kg)• Length -- meter (m)• Time -- second (s)• Temperature -- Kelvin (K)
USCSUSCS
• The English or USCS system has five applicable primary dimensions for the equation.
• Mass - pound-mass (lbm)• Length - feet (ft)• Time - second (s)• Temperature - Rankine (K)• Force - pound-force (lbf)
14
Force UnitsForce Units
m = 1kg
m = 32.174 lbm
F = 1N
F = 1 lbf
a = 1m/s2
a = 1ft/s 2
lbf 22481.0N 1ft 2808.3m 1
lbm 2046226.2kg 1
===
Advice to gain you pointsAdvice to gain you points
Write out all units in all equations to the bitterest of detail!
15
Example (1)Example (1)
( ) ( )
( ) ( ) Ns
mkgsmkgWb
Ns
mkgsm
kgWa
t
t
8.6538.6536807.9400
8.39228.3922807.9400
22
22
=
⋅=
=
=
⋅
=
=
An object at sea level has a mass of 400 kg.
(a) Find the weight of this object on earth.
(b) Find the weight of this object on the moon where the local gravitational acceleration is one-sixth that of earth.
Example (2)Example (2)
( ) ( ) ( )( )
( )−−−=⋅
⋅⋅= 50000/001.0
05.0/1/1000Re3
smkgmsmmkg
The Pipe Reynolds Number, Re, is dimensionless quantity defined as:
Re = ρVD/µ
Evaluate Re for water flowing at an averaged velocity of 1 m/s and pipe with diameter of 50 mm. The transport properties of the water are: density (ρ) 1 g/cm3 and the viscosity (µ) is of 10-3
Ns/m2.
Whenever you work with a formula BE CONSISTENT with your units.
DO NOT MIX (cm) with (m), (g) with (kg). Always use the same unit for mass, length, time, temperature and so forth.
top related