kpi - khong plastic · 2013. 12. 4. · kpi . khong plastic industries sdn. bhd. kpi . ... qc...
Post on 30-Jan-2021
8 Views
Preview:
TRANSCRIPT
-
KHONG PLASTIC INDUSTRIES SDN. BHD. (Formerly known as PERUSAHAAN PLASTIK ADIK BERADIK KHONG SDN BHD.)
Lot 1 & 2, Jalan Indah 1 / 2, Taman Industri Rawang Indah,
48000 Rawang, Selangor D.E, Malaysia.
Tel: 03-6093 3322 (4 Lines)
Fax: 603-6092 2017
KPI
-
KHONG PLASTIC INDUSTRIES SDN. BHD.
KPI
-
Company Profile
***************
Company Name : Khong Plastic Industries S/B.
Address : Lot 1 & 2, Jalan Indah 1 / 2,
Taman Industri Rawang Indah
48000 Rawang Selangor.
Telephone No. : 03-6093 3322 (Hunting Line)
Facsimile No. : 03-6092 2017
Date of Incorporation : 21st October 1982
Nature of Business : The Manufacturing Of Plastic Injection Parts
Authorised Capital : RM 1,000,000.00
Paid Up Capital : RM 1,000,000.00
Factory Land Area : 90,202 Sq Feet
Floor Area : 48,888 Sq Feet
Banker : Public Bank Bhd.
Current Account : 3085709828
Address : No. 19, 21 & 23 Jalan SG 1/6
Taman Seri Gombak
68100 Batu Caves Selangor.
-
Organization Chart
Managing Director
Sales & Marketing
Department
Production
Department
Purchasing &
Logistic
Department
Factory Manager
Production
Technician
Production
Assistant
Sales & Marketing
Manager
Purchasing &
Logistic Manager
Logistic
Assistant
Storekeeper /
Store Clerk
Admin &
Accounts
Departme
nt
Admin & Accounts
Assistant
General Clerk
Production
Supervisor
Admin & Accounts
Manager
Operator
QC Inspector
QC Assistant
QA Assistant
QA Manager
-
Company Personnel
Managing Director : Mr. S. K. Khong
Director :
Mdm. G. T. Ng
Mr. Eddie Khong
Mr. Edmond Khong
Mr. Bryan Khong
Person to Contact :
Sales & Marketing : Mr. Eddie Khong
Account : Mdm. G. T. Ng
Purchasing & Logistic : Mr. Edmond Khong
Production : Mr. Bryan Khong
Admin : Ms. Karen Lee
QA : Mr. Cheng
Major Customers
APM Auto Electrics Sdn Bhd.
Besstar Plaster Manufacturing Sdn Bhd.
DOE Industries Sdn Bhd.
Euro Chairs Manufacturer (M) Sdn Bhd.
Euro Space Industries (M) Sdn Bhd.
Eversafe Extinguisher Sdn Bhd.
Furniweb Manufacturing Sdn Bhd.
Hong Leong Yamaha Motor Sdn Bhd.
KK Lab Supplies Sdn Bhd.
Uchida MK Sdn Bhd.
Major Suppliers
Behn Meyer Polymers Sdn Bhd.
CITC Compound Sdn Bhd.
Commercial Plastic Industries Sdn Bhd.
Duplas Sdn Bhd.
Guan Aik Moh (KL) Sdn Bhd.
Hightech Polymer Sdn Bhd.
PolyPacific Polymers Sdn Bhd.
Soon Yang Chemicals Sdn Bhd.
T.T.A. Polymers (M) Sdn Bhd.
Worldwide Resin & Chemicals Sdn Bhd.
-
COMPANY PROFILE ***********************
Re : The Manufacturing Of Plastic Injection Parts.
KHONG PLASTIC INDUSTRIES SDN. BHD. (formerly known as : PERUSAHAAN
PLASTIK ADIK BERADIK KHONG SDN BHD.) is an established manufacturing of
plastic injection parts company incorporated in 1982. The company principal business is
the manufacturing of plastic injection components according to specification. Other related
services are Hot Stamping, Silkscreen Printing and Mould/ Die making.
The Company undertakes to manufacture plastic injection components for industries like:
electrical, computer, engineering, furniture, car accessories, stationeries, souvenirs and
household products.
Our factory is using Japanese injection moulding machines with mould clamping force
ranging from 80 tons to 1300 tons. These are fully automatic machines and we have well
trained and experienced personnel to handle maintenance and immediate machines
problems.
We assure best quality control and follow strictly according to customer indication for
products mould in our factory.
Please do not hesitate to contact us if we may be of any service to you and we look forward
to potential business relationship with your esteemed organization in the near future.
-
Scope of ISO 9001:2000 Certification
KHONG PLASTIC INDUSTRIES SDN BHD adopts the ISO 9001:2008 requirements in
our company quality management system. We shall be responsible to ensure our quality
management system compliant to the ISO 9001:2008 QMS requirements. The compliant
status is confirmed by assessment of 3rd
party certification body. The certification body is:
TUV NORD (MALAYSIA) SDN. BHD.
Scope of Registration
The Manufacturing Of Plastic Injection Parts
Justification of Exclusion
The quality management system documented in this Quality Manual was established in
accordance to ISO 9001:2008 requirements. This Quality Manual defines the mandatory
policy and procedures.
KHONG PLASTIC INDUSTRIES SDN BHD had identified the *permissible
exclusions based on the requirement of ISO 9001:2008 under clause 7, the exclusions
are as below:
ISO 9001:2008 Clauses 7.3 Design and Development
Justification: KHONG PLASTIC INDUSTRIES SDN BHD activities does not
involve in design and development because the customer supplies all
input information of the product, no research or design activity shall
carried out. KHONG PLASTIC INDUSTRIES SDN BHD does
design the mold and jig to develop the new product, we categories
this presses of development of mold and jig is part of the planning for
product realization.
ISO 9001:2008 Clauses 7.5.2 Validation of Processes for Production and Service
Provision
Justification: All products/service provided by KHONG PLASTIC
INDUSTRIES SDN BHD can be verified by subsequent verification
at appropriate stages prior to delivery.
*Refer to ISO 9001:2008, clause 1.2 (Permissible Exclusions)
In the event that these requirements become relevant in the future, we shall do the
necessary changes and include them as part of our quality management system.
-
Quality Policy Statement
KHONG PLASTIC INDUSTRIES SDN. BHD., a specialist in plastic
injection moulding, is committed in providing quality products to our
customers and continually improves our Quality Management Systems
through:
- Consistently meeting customer’s requirements and expectations
- Consistently reviewing our Quality Management System to ensure compliance with ISO 9001:2008, statutory and regulatory
requirements
- Continuous training to improve the knowledge and skill in all employees
S.K. Khong
Managing Director 6 March 2007
-
Injection Moulding Machines
No : Type of Machine Tonnage Quantity
1. Toshiba IS 1300 (Japan) 1300 1
2. Haitian MA 700 (China) 700 1
3. Welltec TTI-600F2 (China) 600 1
4. Kawaguchi KM 550B (Japan) 550 1
5. Haitian MA 530 (China) 530 1
6. Kawaguchi KM 450B (Japan) 450 1
7. Haitian MA 380 (China) 380 2
8. Haitian MA 280 (China) 280 1
9. Kawaguchi KM 220B (Japan) 220 1
10. Welltec TTT 220 F2R (China) 220 1
11. Haitian MA 200 (China) 200 1
12. Kawaguchi KM 180B2 (Japan) 180 2
13. Kawaguchi KM 180B (Japan) 180 2
14. Kawaguchi KM 140B2 (Japan) 140 3
15. Welltec TTI 130 F2V (China) 130 2
16. Haitian MA 120 (China) 120 2
17. Haitian MA 90 (China) 90 2
18. Kawaguchi KM 80B (Japan) 80 3
19. Kawaguchi KM 80C (Japan) 80 1
20. Kawaguchi KM 80B2 (Japan) 80 4
Complementary Machine :
1. Pad Printing Machine (Hong Kong) 2
2. Ultrasonic Machine (Taiwan) 2
-
Injection Molding Machine
Toshiba IS 1300DE
TOSHIBA MACHINE, with its
30 years of experience of injection
molding machine, has used its rich
store of experience.
IS-DE injection molding machine
were designed and developed, and
technology for high quality and
uniform molding, as well as
energy-saving and high-cycle
performance.
Haitian MA 700
-
Kawaguchi KM-180B
Staff shall be competence to their work
that have direct impact to KHONG
PLASTIC INDUSTRIES SDN BHD’s
product/service quality. Appropriate
training and/or other actions will also
provided in order to satisfy the need when
staff is not complete.
The Training Process shall include
identify training need, conducting training
and evaluation of the effectiveness of the
training.
The top management shall determine and provide the infrastructure needed to achieve
conformity to product requirements. Preventive maintenance and breakdown maintenance
are carried out on infrastructure and work environment to ensure the continuing capability
in achieving product requirements. Machine maintenance could be coordinated with
machine supplier when necessary to maintain the accuracy of the machine.
-
Assembly control
Customer of KHONG PLASTIC
INDUSTRIES SDN BHD might
supply parts to incorporate to
assembly product. When customer
supplied product apply to any job,
administration function shall be
responsible to keep track of the
supplied part with suitable recording,
where else production function shall
be responsible to safe guard the
supplied part prior to the assemble
work. Any lose, damage, or unsuitable
use of the customer property should be
reported to customer and record shall
be maintained in administration
function.
-
Samples of Finish Product
OFFICE FURNITURE
-
AUTOMOTIVE & MOTORCYCLE PARTS
-
Container Body & Parts
Electrical HIP Parts
-
Laboratory PP Parts
-
Sanitary Ware Plastic Part
Engineering Parts
-
Extinguisher Accessories
top related