lf1600 series - ak makİna - cnc, torna, freze, plastik ve … · 2017-03-14 · basic structure 01...
Post on 11-Jun-2018
214 Views
Preview:
TRANSCRIPT
LF1600 SeriesHYUNDAI WIA Front Loading Turning Center
LF1600 Series Front Loading Turning Centers were developed by Hyundai WIA CORP to boast high performance and high stiffness with years of expertise and latest technology. Efficiency and maximum productivity is the philosophy behind these products.
Technical Leader
LF1600 Series
mm(in)
mm(in)
inch
mm(in)
r/min
kW(HP)
mm(in)
EA
Ø370 (14.6″)
165 (6.5″)
6″
Ø45 (1.8″)
4,500
7.5/5.5 (10/7.4)
140/165 (5.5″/6.5″)
2×10
Swing Over the Bed
Max. Turning Length
Chuck Size
Bar Capacity
Speed (rpm)
Motor (Max/Cont.)
Travel(X/Z)
No. of Tool
Twin Spindle Front Loading CNC Turning Center LF1600 Series
● High-speed gantry loader for cycle time reduction
● Minimal vibration through separable bed
● Symmetrical headstock to prevent thermal deformation
● All Axis Box Guide Way
● Highly rigidity servo turret
01 Basic FeaturesOptimized Layout and Design, Twin Spindle Front Loading CNC Turning CenterLF1600 Series
Main SpindleThe main spindle has become sturdier by enlarging its diameter and thickness. Its sturdiness and accuracy are maintained by the high-accuracy angular ball bearings that have been adopted.
TurretServo motor-powered Star 10 signed a variety of tools on each of the turret.
04
0302
Separated type of bed designThe bed and hydraulic unit of LF1600/1800 Series machines is separated by design, to reduce vibration and minimize thermal growth in the castings. Disposal of lubricant is also more easily recovered.
01
Box GuidewayThe LF1600 Series utilizes box guideways for axial movement.
Box guideways provide unsurpassed long-term rigidity and accuracy, even under the heaviest of cutting operations.
Ball ScrewThe double pretension design provides outstanding positioning and repeatabilitywith virtually no thermal growth.
The ball screw is connected directly to the servo drive motors without gears orbelts, to eliminate backlash.
Powerful Servo DrivesPowerful servo drives provide quick acceleration and improve productivity byreducing non-cutting time.
This is further enhanced by the use of box guideways, adding a measure of rigidity
◉ Rapid Travel (X/Z axis) : 24/24 m/min ◉ Travel (X/Z axis) : 140/165 mm (5.5″/6.5″)
◉ Spindle Speed : 4,500 rpm ◉ Spindle Output (Max./Cont.) : 7.5/5.5 kW (10/7.4 HP)
◉ Spindle Torque (Max./Cont.) : 64/47 N.m
Reduction of non-cutting time by fast rapid speed
04+
05
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Basic Structure
01
03
0402
◉ Convenient Coolant Tank Coolant tank is separated from the front,
is easy to maintain and repair.
02 High-Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterLF1600 Series
06+
07
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Spindle Processing Flow
Spindle
Main SpindleBy enlarging the spindle’s diameter and thickness, and using only verified bearings, its rigidity is increased significantly.
This contributes to improved durability and provides a high quality surface finish on every finished part.
C-Axis ControlLF1600M/2SP features C-axis 0.001˚ controls, enabling processes that require various shapes and dimensions.
Parts requiring secondary operations are transferred from Z1 spindle to Z2 spindle via the Z1 spindle’s axis, allowing the secondary process to begin.
The same part can be machined simultaneou-sly, utilizing both the spindle of Z1 axis and Z2 axis, doubling productivity in a single machine.
Multiple families of parts can also be machined simultaneously, utilizing both the spindle of Z1 axis and Z2 axis, doubling productivity in a single machine.
0.001°
Power (kW)
64N.m (30min)120N.m (30min)
7.5kW (30min)
11kW (30min)47N.m (Cont.)81.4N.m (Cont.)
5.5kW (Cont.)7.5kW (Cont.)
Torque (N.m) Power (kW) Torque (N.m)LF1600 Series
03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret LF1600 Series
Turret LF1600 Series has high performance AC servo motor attached, enhances its process reliability. Especially 3-piece coupling is attached, which makes split accuracy better. Powerful tool clamping using hydraulic minimizes tool tip deviation due to load, which displays excellent performance during heavy duty cutting.
◉ Number of Tool : 2×10 EA
◉ Tool Size (O.D) : □20 (□0.8″)
◉ Tool Size (I.D) : Ø32 (Ø1.2″)
◉ Indexing Time : 0.25 sec/step
08+
09
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Turret
BMT turret increases tool performance and rigidity by securing each tool with 4 screws.
Overall cutting power and capability has been improved for all applications.
Mill Turret (BMT55P)
Machining Variation
Mill Tool HolderMachining capabilities have been increased with the addition of a Straight Milling Head, which can remove material from the side of the workpiece, and an Angular Milling Head, which can perform I.D. operations.
A wide variety of additional tool holders can further enhance the machines with capabilities that include drilling and tapping, among others.
Angular Milling HeadStraight Milling Head
◉ Output (Max.) : 3.7/2.2 kW (5/3 HP)
◉ Speed : 4,000 rpm
◉ Collet Size : Ø16 (Ø0.6″) (ER25)
◉ Live Tool Type : BMT55P
O.D Cutting
I.D Cutting
End Milling
Drilling
Drilling
I.D Threading
Ball-End Milling
Face Milling
Machine Monitoring
Energy SavingIntelligent Machining
Easy Programming
HW-MMS HW
-ESS
HW-DPRO T/TM
User Friendly
HW-TM
HYUNDAI WIA Smart System for CNC Turning Center
User Convenience
HW-eDNC
HW-MCG
HW-PGi F (HYUNDAI WIA Programming Guide i for Fanuc System)(Standard)
Realistic 3D solid animationProgramming simulation
Example of easy programmingEasy programming interactively
without code
Engraving CycleProgramming with only entering text by
controlling C-axis
04 Smart SystemSoftware for Smart Operating and MachiningLF1600 Series
HYUNDAI WIA Smart System
Faster processing programming and enhanced processing accuracy are possible through HYUNDAI WIA Smart System. It also maximizes productivity through equipment monitoring and environment-friendly software.
HW-GLM (HYUNDAI WIA Gantry Loader Manager)
Set the position coordinates and the loader driver support features such as easy and convenient way to provide the user operating the loader to be used to support the software
HW-DPRO T/TMHYUNDAI WIA Dialogue PROgram Turn/TurnMill
Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
HW-MMSHYUNDAI WIA Machine Monitoring System
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple pieces of equipment and the progress of processing on a real time basis.
HW-TMHYUNDAI WIA Tool Monitoring
This is an equipment-monitoring software which checks the overload, attrition and possible damage of equipment by analyzing the spindles and the output load of the feed shaft generated during a processing operation.
HW-ESSHYUNDAI WIAEnergy Saving System
This is an environment-friendly power reduction software reducing the standby power unnecessarily wasted in the equipment waiting for a processing operation.
HW-eDNCHYUNDAI WIA ethernet Direct Numerical Control
This software transmits and receives the CNC of processing equipment, the processing program and the NC data on a PC through the internet or serial communications, while managing the processing program of the CNC memory.
HW-MCGHYUNDAI WIAMachine Guidance
NC loading type software offering user-convenience functions like operating equipment, maintenance and monitoring of managing equipment
10+
11
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
05 Automation SystemVarious Devices for User Friendly
LF1600 Series
◉ Gantry Loader Work Size : Ø120 x 80 mm (Ø4.7″ x 3.1″)
◉ Gantry Speed (X/Y/Z) : 150/110/60 m/min
◉ Gantry Loader Work Weight : 3 kg (6.6 lb) x 2 ea
◉ No. of Pallets : 14 Pallets with 3 Bars
◉ Pallet Speed : 1.7 m/min (8 sec / 1 pitch)
◉ Lift Speed (Up-Down) : 3 m/min
Gantry Loader
Work Feeder
완재품 적재 2nd Machining
Construction of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible. In particular, excellent machining effect is achieved during continuous machining of both sides of the same or different work
Gantry Loader Machining Process
원소재 투입 1st MachiningUnloading & Loading
Unloading & Loading
Turn Over
SPECiFiCATiONS
Standard & Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure Device2 Steps Foot SwitchSpindle Inside StopperChuck Open/Close Confirmation DeviceMain Spindle 5° IndexC-Axis (0.001°)TurretTurretMill TurretStraight Mill Holder (Radial)Angular Mill Holder (Axial)Straight Mill Holder (Radial)Angular Mill Holder (Axial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockTail Stock Foot SwitchStandard Live CenterHigh Precesion Live Center2 Steps Tail Stock Pressure SystemCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only Hollow Cylinder & Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow(Only Hollow Cylinder & Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor(Hinge/Scraper)Special Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceDoor Inter-LockTotal Splash GuardQuill Forward/Reverse Confirmation DeviceChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque Limiter
8″10″8″10″
RadialCollet Type,2eaCollet Type,2eaAdapter TypeAdapter Type
For Out-Dia
6 Bar20 Bar
220ℓRear(Rear)Side(Side)
Standard(180ℓ)Swing(200ℓ)Swing Large Size(290ℓ)Large Size(330ℓ)Costomized
Spindle Electric Device
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
LF1600/2SP LF1600M/2SP ○ ○ ☆ ☆ ● ● ☆ ☆ ● ● ● ● ○ ○ ○ ○ ☆ ☆ ● ● ☆ ☆ - ● ● ● - ● - ● - ● - ○ - ○ ● ● ● ● ○ ○ ○ ○ ☆ ☆ - ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ - ○ ○ ○ ☆ ☆ ☆ ☆ ○ ○
☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ● ● ☆ ☆ ● ● ● ● ☆ ☆
LF1600/2SP LF1600M/2SP ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ☆ ☆ ○ ○ - - ○ ○ ☆ ☆ ○ ○ - - ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ☆ ☆ - - - - ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆
Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit BreakerABS EncoderAVR (Auto Voltage Regulator)
Transformer
Auto Power OffDouble Foot SwitchMeasurementQ-SetterAutomatic Q-SetterWork CloseConfirmation DeviceWork Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)Measuring SystemEnvironmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Turret Work Pusher (For Automation)GANTRY Automation SystemTurn Over DeviceIn Stocker (Rotary)OUT Stocker (Rotary)NG ChuteHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC Software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)Load Master (HW-GLM : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1 Color : ■3 Color : ■■■3 Color : ■■■B
LED TypeLED TypeDigitalDigitalDigital6ea9ea
30kVA35kVA
Removable Type
TACOSMC
X AxisZ Axis
For Automation
StandardHigh Speed
16Contact32Contact
8/10/12/14 Pos8/10/12/14 Pos
Solid35bar/15ℓ
Need Munsel No.
The specifications as above will only serve as a reference.
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
12+
13
unit : mm(in)External Dimensions
SPECiFiCATiONS
RearChip Conveyor
1900 (74.8)
3814 (150.1)
1936 (76.2)
2782
(109
.5)
1200
(47.
2)
3054 (120.2)
unit : mm(in)Tooling System
14+
15
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
O.D Holder
I.D Holder
Facing Holder
O.D Holder
I.D Holder
Facing Holder
Straight MillHolder
Angular MillHolder
SPECiFiCATiONS
Right/Left
Single
Tool Holder
Standard
Standard
Ø8 (5/16″)
Ø10 (3/8″)
Ø12 (1/2″)
Ø16 (5/8″)
Ø20 (3/4″)
Ø25 (1″)
MT 1 × MT 2
MT 2
O.D Holder
Facing Holder
I.D Holder
U-Drill Tool Holder
Stright Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
iTEM LF1600/2SP LF1600M/2SP
8 6
2 2
10 8
- Opt
- 2
- 2
2 2
2 2
2 2
2 2
2 2
2 2
2 2
2 2
- 2 Set
Tooling Parts Detail
Specifications are subject to change for improvement without notice.
LF1600/2SP
10 StationBMT 55P
10 Station
LF1600M/2SP
unit : mm(in)interference
360 (14.2)
135 (5.3) 135 (5.3) 65(2.5)
30(1.2)
130 (5.1)
140 (5.5)(X1 STROKE)
140 (5.5)(X STROKE)
95(3.7)
270(10.6)
10(0.4)
95 (3.7)
95 (3.7)
95 (3
.7)
95 (3
.7)
ø188
(ø7.4)
ø188(ø7.4)
ø180(ø7.1) ø186
(ø7.3)
ø193
(ø7.6) ø186
(ø7.3)
ø530
(ø20.8)
360 (14.2)
135 (5.3) 135 (5.3) 65(2.5)
100(3.9)
30(1.2)
130 (5.1)
95(3.7)
270(10.6)
10 (0.4)
ø530
(ø20.8)
ø260
(ø10.2)
ø165(ø6.5)
ø260
(ø10.2)
ø165(6.5)
ø165
(ø6.5)
ø165
(ø6.5
)
LF1600/2SP
LF1600M/2SP
SPECiFiCATiONS
unit : mm(in)Tooling Travel Range
I.D TOOLHOLDER
O.D TOOLHOLDER
ANGULAR MILLHOLDER
STRAIGHT MILLHOLDER
I.D TOOLHOLDER
O.D TOOLHOLDER95 (3.7)
360 (14.2)360 (14.2)
140 (5.5)(X STROKE)
15(0.6)
100(3.9)
Ø165 (Ø6.5)
370 (14.5)
40(1.6)
84(3.3)
34(1.3)
140 (5.5)
165 (6.5)
(Z STROKE)
125 (4.9)125 (4.9)
95 (3.7)
165 (6.5)
(Z STROKE)
10(0.4)
130 (5.1)
11(0.4)
22 (0.8)
120 (4.7)
135 (5.3)135(5.3)
Ø165 (Ø6.5)
340 (13.4)
115 (4.5)
214 (8.4)
65(2.6)
30(1.2)
(X STROKE)(X STROKE)
40(1.6)
84(3.3)
164 (6.5)
(Z STROKE)
119 (4.7)
(Z STROKE)46(1.8)
135 (5.3)
84 (3.3)
34 (1.3)
45(1.7)
Ø32(Ø1.3)
34(1.3)
1
95 (3.7)
360 (14.2)360 (14.2)
15(0.6)
100 (3.9)
Ø165 (Ø6.5)
370 (14.5)
165 (6.5)
165 (6.5)
125 (4.9)125 (4.9)
10(0.4)
130 (5.1) 120 (4.7)
140 (5.5) 135 (5.3)140 (5.5)135 (5.3)
Ø165 (Ø6.5)
65(2.6)
80 (3.1)
70(2.7)
70(2.7)
72 (2.8)
Ø165 (Ø6.5)
95 (3.7)
73 (2.8)
(X STROKE)
165 (6.5)
(Z STROKE)
40(1.6)
84(3.3)
21(0.8)
10(0.4)
130 (5.1)120 (4.7)
139.5 (5.5)
5(0.2)
140(5.5)
105(4.1)
34(1.3)
21.5
(0.8)
Ø165 (Ø6.5)
139(5.5)
84(3.3)
40(1.6)
140 (5.5)
360 (14.2)360 (14.2) 370 (14.5)
135 (5.3)135 (5.3)
140 (5.5)(X STROKE)
165 (6.5)
(Z STROKE)
(X STROKE)
140 (5.5)
LF1600/2SP
LF1600M/2SP
16+
17
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SPECiFiCATiONS
Specifications are subject to change for improvement without notice.
Swing Over the Bed
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Travel (X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Touque (Max/Cont.)
Collet Size
Type
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m(lbf.ft)
-
-
deg
mm(in)
m/min
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m(lbf.ft)
mm(in)
-
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
iTEM LF1600M/2SPLF1600/2SP
Ø370 (14.6″)
Ø260 (10.2″)
165 (6.5″)
Ø45 (1.77″)
ø165 (6.5″)
ø53 (2.1″)
4,500
7.5/5.5 (10/7.4)
64/47 (47.2/34.6)
BELT
A2-5
- 0.001˚
140/165 (5.5″/6.5″)
24/24
BOX GUIDE
2×10
□20 (0.8″)
ø32 (1.3″)
0.25
- 3.7/2.2 (5/3)
- 4,000
- 26.2/14 (19.3/0.3)
- Ø16 (0.6″) ER25
- BMT55P
220 (58.1)
4 (1)
25
Over 25
220/60 (200/50)
1,900×1,936 (74.8″×76.2″)
2,210 (87″)
4,500 (9,921)
FANUC 31i-A
Specifications [ ] : Option
SPECiFiCATiONS
FANUC 31i-AAxis control / Display unit
Controlled Axis
Simultaneous controllable Axis
Least input increment
Least command increment
High speed HRV controlInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo-offBacklash compensationPosition switchUnexpected disturbance torque detectionHigh resolution transfer control (HRM)LCD / MDIOperation Automatic operation (memory)MDI operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockFeed functionsManual jog feedManual handle feedrateFeed commandFeedrate overrideJog overrideRapid traverse overrideOverride cancelFeed per minute / rotationProgram input & interpolation functionsNano interpolationDwellThread retractVariable lead threading1st reference point returnReference point return check2nd reference point returnProgram stop / EndTape codeOptional block skipMaximum programmable dimensionsProgram numberAbsolute and incremental programmingDecimal point inputPlane selectionWork coordinate system selectionManual absoluteDirect drawing dimension programmingG code systemProgrammable data inputSub program callCustom macro BAddition of custom macro common variableMultiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turning
Max. 6 Axis are availableX, Z axisX, Z, C axis (M type machine)X, Z, B, C, A axis (MS type machine)X, Z, Y, B, C, A axis (SY type machine)2axeis / Linear and circular (Max. 4Axis)X, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 degX, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 deg
G20 / G21Each axis / All axisAll axis
Over-travel
+/- 0~9999 pulses(Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
10.4″ Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handlex1, x10, x100F code feedrate direct command0~200 % (10% units)0~2,000 mm/min[79 ipm]F1, F5, F25/F50, F100%
Positioning/Linear/Circular (G00/G01/G02, G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO 1 ea+/- 9999.9999″O+4 digits
G17, G18, G19G52 to G59“ON” fixed
Included chamfering / Corner R`AG1010 Step
#100 to #199, #500 to #999
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset pairsTool offsetTool nose radius compensationDirect input of measured toolcompensation value BTool life managementData in/output & editing functionsInput/Output interfaceMemory card input/outputEmbeded ethernetPart program storage lengthNumber of registrable programs expansionMemory lockBackground editingExtended part program editionDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screenGraphic displaySpindle / Servo setting screenSelection of 5 optional languageLCD screen saveAutomatic data backupFunctions according to machine specificationCs contouring controlStored pitch error compensationPolar coordinate interpolationCylindrical interpolationCanned cycles for drillingspindle orientation expansion
OptionHigh speed ethernetOptional block skip3rd & 4th reference point returnG code systemPart program storage lengthTool OffestPoligon TurningHelical interpolationDynamic graphic displayProtection of data at 8 levelsManual guide iTool Monitoring function
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
M4 digits
S4 digits, binary outputG96, G9750% to 150% (10% units)
T2 + 264 pairs
G40, G41, G42
RS232C
100Mbps256 KbyteMax. 500 programs
Copy, move, change of NC program
Alarm & operation display
Rod meter light
Screen saver
Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindle
100 Mbps (Option board is required)9 ea
B / C512 Kbyte / 1024 Kbyte99 / 200 / 400 EA
Interactive programHWTM (Built-in Fanuc type)
18+
19
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
CONTROLLER
GLOBAL NETWORk
20+
21
LF
1600
Ser
ieS
Fron
t Loa
ding
Tur
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
HYUNDAI WIA America 265, Spring Lake Drive, Itasca, IL, 60143TEL : +1 201 489 2887 FAX : +1 201 489 2723
L.A Office11155 Knott Ave, STE B/C, Cypress, CA 90630, U.S.A TEL : +1 714 373 5480FAX : +1 714 373 5485
America Technical Center39205 Country Club Drive Suite C-9, Farmington Hills, MI 48310TEL : +1 248 324 1056FAX : +1 248 324 0989
HYUNDAI-KIA EUROPE GmbH Kaiserleipromenade 5, D-63067 Offenbach, Germany TEL : +49 69271 472 701FAX : +49 69271 472 719
Raunheim Service CenterFrankfurter Str. 63, 65479 Raunheim, GermanyTEL : +49 6142 9256 111 FAX : +49 6142 9256 100
JIANGSU HYUNDAI WIACompany No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, ChinaTEL : +86 512 5672 6808FAX : +86 512 5671 6960
SHANDONG HYUNDAI WIACompany No.188 Shanghai Road, Rizhao City, Shandong Province, ChinaTEL : +86 633 229 9031/5910FAX : +86 633 229 9191/9199
CHINA Sales Company1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233 TEL : +86 21 6427 9885FAX : +86 21 3431 0376
CHINA Beiging OfficeRoom 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, China 100027 TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853
CHINA Guangzhou OfficeRoom 609, No.1 Yingbin Building 1# Yingbin Blvd (Dashi Section) Panyu District Guangzhou Ctiy, Guangdong, China 511431 TEL : +86 20 8550 6595~6, FAX : +86 20 8550 6597
CHINA Chengdu OfficeRoom 2103, Block A, Times Plaza, No.2 Zongfu Road, Jinjiang District, Chengdu, ChinaTEL : +86 28 8665 5550FAX : +86 28 8666 2985
CHINA Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, ChinaTEL : +86 27 5956 3256~7FAX : +86 27 5952 3258
CHINA Qingdao OfficeRoom 1207, ZhaoYin Building, 36 HongKong Middle Road, Qingdao 266071, PR China TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338
CHINA SHENYANG OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013 TEL : +86 24 3228 6640FAX : +86 24 3228 6642
HYUNDAI WIA INDIA48, Sur. No78-08. Kandamangalam Village, Sengadu Post, Sriperumbudur Taluk, Kancheepuram, Tamilnadu-602 105, India TEL : +91 44 3717 6333FAX : +91 44 3717 6363
Changwon Office153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 642-110)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Office37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 437-718)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HEAD OFFICE & FACTORY
OVERSEAS OFFICES
2014-09 002.002 ENG
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
www.wiamachine.co.kr
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173
top related