lsr (liquid silicone rubber - babyplast - plasdan
Post on 29-May-2022
9 Views
Preview:
TRANSCRIPT
babyplast
www.babyplast.com
RAMBALDI + CO.IT SRL - Via Rossini, 7 - 23847 Molteno (LC) Italy - Tel. 0313574961, Fax. 031 3574982
LSR (Liquid Silicone Rubber)
LSR (Liquid Silicone Rubber)
Cartridge (500 ml)
Adapter for Silicon loader
BBabyplast - cartridge version
babyplast
www.babyplast.com
RAMBALDI + CO.IT SRL - Via Rossini, 7 - 23847 Molteno (LC) Italy - Tel. 0313574961, Fax. 031 3574982· · ·
LSR (Liquid Silicone Rubber)
Piston diameter (mm) 12 I 14
6,5 I 9
1.830 I 1340
5,8 I 7,4
Dosage (g/s) 1,8
Clamping force (kN) 62,5
Opening stroke (mm) 110
Ejector force (kN)
Ejector stroke (mm) 45
Hydraulic pressure (bar) 130
Oil tank capacity (approx. l) 16
Noise level (approx. dB) < 70
Power supply 3 phase 230/400 V - 50/60 Hz - 2,75 kW
Technical data
we resrve the right to make changes
Technical data - Injection unit LSR:
- Injection unit with pneumatic shut off nozzle - Cooled shut off nozzle for direct or
indirect injection into the LSR part (acts as cold runner)
- Standard injection gate diam. 0,5mm / optional 1,2mm - Feeding of material: pre-mixed cartridge or adapter for
external mixer loader - Separate zones for heated mould halves
Options
- Robot interface - Adapter for external mixer loader
- 2 mould heaters (C30300500) - 2 thermocouples (C302.6651400) - Empty cartridges for premixed LSR
Volume (cm³)
6,5
Material flow (cm³/s) Pressure (bar)
- Injection unit for thermoplastic materials
top related