m.m.t. s.r.l. · iso 9001 m . m . t . s.r.l. 26010 capralba (cr) - italy - via degli artigiani, 56...
Post on 15-Feb-2019
348 Views
Preview:
TRANSCRIPT
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 11
M.M.T. s.r.l. MICROWAVE MOISTURE TECHNOLOGY
26010 CAPRALBA (CR) - ITALY -
www.mmtitalia.com info@mmtitalia.com
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 22
WATER: products selection guide
Level switches
Standard 200-000-0x 200-00y-0x
Standard sensitivity High sensitivity
Pag. 4 Pag. 4
Delayed 201-000-0x 201-100-0x
Standard sensitivity; delayed to on Standard sensitivity; delayed to off
Pag. 5 Pag. 5
IP 55 320-000-0x 323-100-0x
Conductivity water level switches in water-proof enclosure (1 level switch) Conductivity water level switches in water-proof enclosure (2 level switches)
Pag. 6 Pag. 6
Standard 203-000-0x 203-00y-0x 204-000-0x 204-100-0x
Standard sensitivity for DIN guide High sensitivity for DIN guide Delayed to on conductivity level switch for DIN guide Delayed to off conductivity level switch for DIN guide
Pag. 7 Pag. 7 Pag. 8 Pag. 8
Probes and electrode holders stainless steel/ceramics for boilers
1/2” 3/8”
395-001-00 395-045-00
electrode-holder; 3/8” 3/8” probe, with 980mm electrode
Pag. 10Pag. 10
Probes and electrode holders stainless steel/teflon for food industry
1/2” 3/8”
390-000-00 390-001-00
1/2” electrode-holder 3/8” electrode-holder
Pag. 11 Pag. 11
010-020-00 Flexible water level probe Pag. 9
1/2” 600-050-00 600-050-20 600-100-00 600-100-20
probe; body = POM probe; body = POM stainless steel AISI 316 probe; body = POM probe; body = POM stainless steel AISI 316
L=480mm L=480mm L=980mm L=980mm
Pag. 12 Pag. 12Pag. 12 Pag. 12
1.5” 3 electrodes 1.5” 5 electrodes
700-030-00 700-030-10 700-030-20 700-031-00 700-031-10 700-031-20 700-032-00 700-032-10 700-052-00 700-052-10 700-050-00 700-050-10 700-050-20 700-051-00 700-051-10 700-051-20
probe; body = POM probe; body = stainless steel AISI303 POM probe; body = AISI316 POM probe; body = POM probe; body = stainless steel AISI303 probe; body = AISI316 probe; body = POM electrode-holder; body = stainless steel AISI303 POM probe; body = POM electrode-holder; body = stainless steel AISI303 POM probe; body = POM probe; body = stainless steel AISI303 POM probe; body = AISI316 POM probe; body = POM probe; body = stainless steel AISI303 probe; body = AISI316
L=3x480mm L=3x480mm L=3x480mm L=3x980mm L=3x980mm L=3x980mm L=3x60mm L=3x60mm L=5x60mm L=5x60mm L=5x480mm L=5x480mm L=5x480mm L=5x980mm L=5x980mm L=5x980mm
Pag. 13 Pag. 13Pag. 13 Pag. 13Pag. 13 Pag. 13Pag. 14 Pag. 14Pag. 15Pag. 15 Pag. 16Pag. 16Pag. 16Pag. 16Pag. 16Pag. 16
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 33
Probes capacitive
½” 1 electrode
677-112-14 677-212-14 677-122-14
High-frequency level switch stainless steel AISI303 High-frequency level switch stainless steel AISI303 High-frequency level switch AISI 316
L=473mm L=973mm L=473mm
Pag. 17 Pag. 17 Pag. 17
1/2” 1 electrode 440-005-04 440-010-04 440-015-04 440-020-04 451-505-04 451-510-04 440-330-04
Continuous level transmitter; body = stainless steel Continuous level transmitter; body = stainless steel Continuous level transmitter; body = stainless steel Continuous level transmitter; body = stainless steel Continuous level transmitter high temperature Continuous level transmitter high temperature Continuous level transmitter with ROPE
L=500mm L=1000mm L=1500mm L=2000mm L=500mm L=1000mm L=3000mm
Pag. 18 Pag. 18Pag. 18 Pag. 18Pag. 20 Pag. 20Pag. 19
Power supply for probe
Standard 410-000-0x 411-000-0x 412-000-0x
voltage output power supply for 400 series current output power supply for 400 series contact output power supply for 677 series
Pag. 21 Pag. 22 Pag. 23
Theshold switch
Standard 420-000-01 420-000-02 420-000-03
Theshold switch for continous level meter Theshold switch for continous level meter Theshold switch for continous level meter
24 V a.c. 110 V a.c. 230 V a.c.
Pag. 24 Pag. 24Pag. 24
Electronic self testing conductivity level and safety probe
Certificate PED Mod. B+D
210-200-01 210-200-03 211-200-03 800-000-50
Electronic self testing conductivity level minimum level Electronic self testing conductivity level minimum level Electronic self testing conductivity level maximum level Safety probe
24 V a.c. 230 V a.c. 230 V a.c.
Pag. 25 Pag. 25Pag. 26Pag. 27
Welding loching ring
999-050-00 999-090-00
Welding loching ring for single probe ½” Welding loching ring for multiple probe 1-½”
Pag. 28Pag. 28
Electrode and outdistance
999-005-00 999-053-00
Electrode stainless steel 316 Diameter 6mm L= 1m Outdistance for electrode diameter 6mm
Pag. 29 Pag. 29
Protection and junction
999-021-00 999-011-00
Protection coprinylon Joint 4MA x 6MA SW8 stainless steel
Pag. 30Pag. 30
[Acqua_E_CAT.doc] gen – 11
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 44
200 CONDUCTIVITY LEVEL SWITCH
TECHNICAL CHARACTERISTICS
• Electric wiring: plug-in type; octal soket • Protection class: IP40 • Internal components: surface mounting tecnology (SMD) • Front led lamps: green: power supply
red: switch status • Sensitivity: standard 10µS - 10.000µS
on request 1µS - 20µS on request 0,3µS - 2µS
• Electrolysis phenomena: absent in a.c. models • Contact: N.O. – 5 A – 230V a.c. • Power supply: 24 or 110 or 230 V a.c. • Frequency: 50 – 60 Hz • Absorption: 5 VA • Weight: 220 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
N.C.
N.O.COM.
240 V.AC 5A (AC1)ALIM.
SUP.INF.COM.
12
345
6
78
MAIN APPLICATIONS
- Steam boliers, autoclave - tanks, wells - heating plants - pumping system - protection of pumps, disabling running without water
ORDER CODES CODE INTEGRAL RESISTIVITY INTEGRAL SENSITIVITY CHARACTERISTICS POWER SUPPLY
200-000-0x 0-100 kΩ 10−10.000µS standard x=1 24V; x=2 110V; x=3 230V a.c.
200-001-0x 0-10 kΩ 100−10.000µS low sensibility x=1 24V; x=2 110V; x=3 230V a.c. 200-002 0x 50 k -1 MΩ 1 - 20µS high sensibility x=1 24V; x=2 110V; x=3 230V a.c. 200-003-0x 500 k - 3 MΩ 0.3 - 2µS high sensibility x=1 24V; x=2 110V; x=3 230V a.c.
Informations provided herein can be changed without notice. [200_E_CAT.doc] feb-08
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 55
201 DELAYED CONDUCTIVITY LEVEL SWITCH
TECHNICAL CHARACTERISTICS
• Electric wiring: plug-in type; octal soket • Protection class: IP40 • Internal components: surface mounting tecnology (SMD) • Front led lamps: green: power supply
red: switch status • Sensitivity: standard 10µS - 10.000µS
on request 1µS - 20µS on request 0,3µS - 2µS
• Dealy: to ON or to OFF; from 0,5” to 12” • Electrolysis phenomena: absent in a.c. models • Contact: N.O. – 5 A – 230V a.c. • Power supply: 24 or 110 or 230 V a.c. • Frequency: 50 – 60 Hz • Absorption: 5 VA • Weight: 220 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
N.C.
N.O.COM.
240 V.AC 5A (AC1)ALIM.
SUP.INF.COM.
12
345
6
78
MAIN APPLICATIONS
- boliers - tanks, wells - heating plants - pumping system - protection of pumps, disabling running without water
ORDER CODES
CODE INTEGRAL RESISTIVITY INTEGRAL SENSITIVITY CHARACTERISTICS POWER SUPPLY201-000-0x 0-100 kΩ 10−10.000µS delay to on x=1 24V; x=2 110V; x=3 230V a.c. 201-100-0x 0-100 kΩ 10−10.000µS delay to off x=1 24V; x=2 110V; x=3 230V a.c. 201-001 0x 0 - 10 kΩ 100−10.000µS delay to on -low sensibility x=1 24V; x=2 110V; x=3 230V a.c. 201-003-0x 500 k - 3 MΩ 0.3 - 2µS delay to on -high sensibility x=1 24V; x=2 110V; x=3 230V a.c.
Informations provided herein can be changed without notice. [201_E_CAT.doc] sep-00
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 66
320
CONDUCTIVITY WATER LEVEL SWITCHES IN WATER-PROOF ENCLOSURE
TECHNICAL CHARACTERISTICS
• Electric wiring: plug-in type; octal soket • Protection class: IP55 • Internal components: surface mounting tecnology (SMD) • Front led lamps: green: power supply
red: switch status • Sensitivity: standard 10µS - 10.000µS
on request 1µS - 20µS on request 0,3µS - 2µS
• Electrolysis phenomena: absent in a.c. models • Contact: (exchange) 5 A – 230V a.c. • Power supply: 24 or 110 or 230 V a.c. • Frequency: 50 – 60 Hz • Absorption: 5 VA • Weight: 800 g
MECHANICAL DIMENSIONS
12,7
14,4
UNSCREW THE 4 FRONTAL SCREWS TOACCESS LEVEL SWITCHES AND WIRING
WIRING DIAGRAM
N.C.
N.O.COM.
240 V.AC 5A (AC1)ALIM.
SUP.INF.COM.
12
345
6
78
MAIN APPLICATIONS
- boliers - tanks, wells - heating plants - pumping system - pump protection, disabling running without water
ORDER CODES CODE INTEGRAL RESISTIVITY INTEGRAL SENSITIVITY LEVEL
SWITCH POWER SUPPLY
320-000-0x 0÷100 kΩ 10÷10.000µS 1 – (one) x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24V d.c.323-000-0x 0÷100 kΩ 10÷10.000µS 2 – (two) x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24V d.c.
Informations provided herein can be changed without notice. [320_E_CAT.doc] apr-02
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 77
203 DIN RAIL CONDUCTIVITY LEVEL SWITCH
TECHNICAL CHARACTERISTICS
• Electric wiring: by screw • Protection class: IP30 • Internal components: surface mounting tecnology (SMD) • Front led lamps: green: power supply
red: switch status • Sensitivity: standard 10µS - 10.000µS
on request 1µS - 20µS on request 0,3µS - 2µS
• Electrolysis phenomena: absent in all models • Contact: N.O. – 5 A – 230V a.c. • Power supply: 24 or 110 or 230 V a.c. • Frequency: 50 – 60 Hz • Absorption: 5 VA • Weight: 190 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
MAIN APPLICATIONS
- Steam boliers, autoclave - tanks, wells - heating plants - pumping system - protection of pumps, disabling running without water
ORDER CODES CODE INTEGRAL RESISTIVITY INTEGRAL SENSITIVITY CHARACTERISTICS POWER SUPPLY
203-000-0x 0-100 kΩ 10−10.000µS standard x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.203-001-0x 0-10 kΩ 100−10.000µS low sensibility x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.203-002 0x 50 k -1 MΩ 1 - 20µS high sensibility x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.203-003-0x 500 k - 3 MΩ 0.3 - 2µS high sensibility x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.
Informations provided herein can be changed without notice. [203_E_CAT.doc] jun-06
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 88
204 DIN RAIL DELAYED CONDUCTIVITY LEVEL SWITCH
TECHNICAL CHARACTERISTICS
• Electric wiring: by screw • Protection class: IP30 • Front led lamps: green: power supply red: switch status • Sensitivity: standard 10µS - 10.000µS on request 1µS - 20µS on request 0,3µS - 2µS • Dealy: to ON or to OFF; from 0,5” to 15” • Electrolysis phenomena: absent in all models • Contact: N.O. – 5 A – 230V a.c. • Power supply: 24 or 110 or 230 V a.c. or 24 V dc • Frequency: 50 – 60 Hz • Absorption: 5 VA (ac model) - 1VA (dc model) • Weight: 190 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
MAIN APPLICATIONS
- Steam boliers, autoclave - tanks, wells - heating plants - pumping system - protection of pumps, disabling running without water
ORDER CODES
CODE INTEGRAL RESISTIVITY INTEGRAL SENSITIVITY
CHARACTERISTICS POWER SUPPLY
204-000-0x 0-100 kΩ 10−10.000µS delay to on standard x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.204-100-0x 0-100 kΩ 10−10.000µS delay to off standard x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.204-001 0x 0-10 kΩ 100−10.000µS delay to on + low sensibility x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.204-002 0x 50 k -1 MΩ 1 - 20µS delay to on + high sensibility x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.204-103-0x 500 k - 3 MΩ 0.3 - 2µS delay to off + high sensibility x=1 24V; x=2 110V; x=3 230V a.c.; x=4 24 Vd.c.
Informations provided herein can be changed without notice. [204_E_CAT.doc] Jan-08
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 99
010 FLEXIBLE WATER LEVEL PROBE
MECHANICAL DIMENSIONS [mm]
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: white POM • Electric wiring: PG7 cable gland • Electrode: stainless steel AISI 303 • Temperature: 60°C • Applications: - water - water mixed with hydrocarbons
• Weight: 50 g
ORDER CODES CODE ELECTRODE BODY
010-020-00 inox AISI 303 white POM Information provided herein can be changed without notice. [010_020_E_CAT.doc] lug - 04
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1100
390 SINGLE ELECTRODE-HOLDER
MECHANICAL DIMENSIONS
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: stainless steel – AISI 303 • Insulator: PTFE • Thread: 3/8” GAS • Electrode: stainless steel ø 6MA L=57mm • Temperature: 180°C on the electrode • Pressure: 25 bar • Protection class: IP40 with soft protection cap (option) • Weight: 80 g
ORDER CODES CODE ELECTRODE THREAD
390-000-00 stainless steel AISI 303 6MA 1/2 " stainless steel AISI 303390-001-00 stainless steel AISI 303 6MA 3/8 " stainless steel AISI 303
ACCESSORY CODE DESCRIPTION
999-021-03 A Soft protection cap 999-003-00 B Electrode inox AISI 304 L=1mt D=5,2mm 999-014-00 C nut 6MA inox 999-012-00 D Jointing nut 6MA x 6MA inox
Informations provided herein can be changed without notice. [390_E_CAT.doc] mar – 05
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1111
395 SINGLE ELECTRODE-HOLDER
MECHANICAL DIMENSIONS
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: stainless steel – AISI 303 • Insulator: allumina (Al2O3) • Thread: 3/8” GAS • Electrode: stainless steel AISI 303 ø 6MA L=65mm • Temperature: 250°C on the electrode • Pressure: 25 bar • Protection class: IP40 with protection coprinylon (option)• Weight: 100 g
ORDER CODE CODE ELECTRODE THREAD
395-000-00 stainless steel AISI 303 L= 65mm 1/2“ stainless steel395-001-00 stainless steel AISI 303 L= 65mm 3/8” stainless steel 395-040-00 stainless steel AISI 303 L= 500mm 1/2“ stainless steel 395-041-00 stainless steel AISI 303 L= 500mm 3/8” stainless steel 395-044-00 stainless steel AISI 303 L= 1000mm 1/2“ stainless steel 395-045-00 stainless steel AISI 303 L= 1000mm 3/8” stainless steel
ACCESSORY CODE DESCRIPTION
999-021-00 A Protection coprinylon 999-003-00 B Electrode stainless steel AISI 304 L=1mt D=5,2mm 999-014-00 C Nut 6MA stainless steel 999-012-00 D Jointing nut 6MA x 6MA stainless steel
Information provided herein can be changed without notice. [395_000_00_E_CAT.doc] giu - 08
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1122
600 SERIES 600 SINGLE PROBE FOR FOOD INDUSTRY
MECHANICAL DIMENSION
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: see table “ order codes ” • Thread: ½” gas • Electric wiring: according DIN 43650A with cable inlet PG11 • Protection class: IP 65 • Electrode: AISI 316 – ø 6mm
L = 473mm • Covering: 1mm thick PTFE • Temperature: 120°C on the electrode • Pressure: 25 bar • Weight: 320g
WIRING DIAGRAM
1
3 2
connector
electrode contact
earth contact
ORDER CODES
CODE ELECTRODE LENGHT BODY 600-050-00 473 mm. Inox AISI 303 - POM600-050-20 473 mm. Inox AISI 316 - POM 600-100-00 973 mm. Inox AISI 303 - POM600-100-20 973 mm. Inox AISI 316 - POM
Information provided herein can be changed without notice. [600_E_CAT.doc] apr - 09
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1133
700 SERIES 700 MULTY-PROBE FOR FOOD INDUSTRY (with 3 ELECTRODES)
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: see table “ order codes ” • Thread: 1 - ½” gas • Electric wiring: DIN 43650-A with cable inlet PG11 • Protection grade: IP 65 • Electrode: three; AISI 316 – ø 6mm L = 473mm • Covering: 1mm thick PTFE • Temperature: 120°C on the electrodes • Pressure: 25 bar • Weight: 850g for 473 mm long electrodes
MECHANICAL DIMENSION
INTERNAL WIRING DIAGRAM
WIRING DIAGRAM
ORDER CODES CODE ELECTRODE LENGHT BODY/CAP
700-030-00 473 mm POM 700-030-10 473 mm AISI303 stainless steel - POM 700-030-20 473 mm AISI 316 stainless steel -POM 700-031-00 973 mm POM 700-031-10 973 mm AISI303 stainless steel - POM 700-031-20 973 mm AISI 316 stainless steel -POM
Informations provided herein can be changed without notice. [700_E_CAT1.doc] apr - 09
12
3
Base
Electrode
body
INTERNAL
1
3 2
connector
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1144
700 SERIES 700 MULTY-ELECTRODE HOLDER FOR FOOD INDUSTRY (for 3 ELECTRODES)
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: see table “ order codes ” • Thread: 1 - ½” gas • Electric wiring: DIN 43650-A with cable inlet PG11 • Protection grade: IP 65 • Electrode: three; AISI 303 – ø 6mm L = 60mm • Covering: 1mm thick PTFE • Temperature: 100°C on the electrodes • Pressure: 25 bar • Weight: 300g
MECHANICAL DIMENSION
INTERNAL WIRING DIAGRAM
WIRING DIAGRAM
ORDER CODES CODE ELECTRODE LENGHT BODY
700-032-00 N°3 60 mm. POM 700-032-10 N°3 60 mm. AISI303 stainless steel - POM
Informations provided herein can be changed without notice. [700_E_CAT2.doc] apr - 09
12
3
Base
Electrode
body
INTERNAL
1
3 2
connector
64
5860
base
body
6MA threaded hole
1-1/2" gasthreaded connection
60 wrench
electrode AISI 316stainless stell9
coveringptfe11
lookingring seat
gasket
screw
connector
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1155
700 SERIES 700 MULTY-ELECTRODE HOLDER FOR FOOD INDUSTRY (for 5 ELECTRODES)
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: see table “ order codes ” • Thread: 1 - ½” gas • Electric wiring: with cable inlet PG11 • Protection grade: IP 65 • Electrode: five; AISI 303 – ø 6mm L = 60mm • Covering: 1mm thick PTFE • Temperature: 100°C on the electrodes • Pressure: 25 bar • Weight: 360 g
MECHANICAL DIMENSION
WIRING DIAGRAM
ORDER CODES
CODE ELECTRODE LENGHT BODY 700-052-00 60 mm POM 700-052-10 60 mm AISI303 stainless steel - POM
Informations provided herein can be changed without notice. [700_E_CAT3.doc] apr - 09
4 x 1,5
4 MA nutwire terminal
wire terminal
64
5860
1-1/2" gas threadedconnection
60 wrench
covering ptfe11
stainless steelelectrode holder
9
6 MA theaded hole
lockingring seat
body
PG 11 hole forcable access
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1166
700 SERIES 700 MULTY-ELECTRODE HOLDER FOR FOOD INDUSTRY (with 5 ELECTRODES)
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: see table “ order codes ” • Thread: 1 - ½” gas • Electric wiring: with cable inlet PG11
• Protection grade: IP 65 • Electrode: five; AISI 316 – ø 6mm L = 473mm • Covering: 1mm thick PTFE • Temperature: 100°C on the electrodes • Pressure: 25 bar • Weight: 650 g
MECHANICAL DIMENSION
WIRING DIAGRAM
ORDER CODES CODE ELECTRODE LENGHT BODY
700-050-00 473 mm POM 700-050-10 473 mm AISI 303 stainless steel - POM 700-050-20 473 mm AISI 316 stainless steel -POM 700-051-00 973 mm POM 700-051-10 973 mm AISI 303 stainless steel - POM 700-051-20 973 mm AISI 316 stainless steel -POM
Informations provided herein can be changed without notice. [700_E_CAT4.doc] apr - 09
4 x 1,5
4 MA nutwire terminal
wire terminal
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1177
677 HIGH-FREQUENCY LEVEL SWITCH
TECHNICAL CHARACTERISTICS
• Sensor working: capacitive – high frequency • Probe body: see table “ order codes ” • Electrode: stainless stees AISI 316 – ø6mm L = 473mm • Covering: 1mm thick PTFE • Thread: ½” gas • Electric wiring: according to DIN 43650-A • Power supply: 24 Vd.c. ± 5% • Absorption: 2VA • Temperature: 120°C on the electrode • Pressure: 25 bar • Protection class: IP 65 • Signal: threshold on/off PNP with 1 internal led lamp • Output current max: 200 mA d.c. • Sensitivity: adjustable, by trimmer • Weight: 300 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
PRODUCTS AND USE - oils in general - refrigerating liquids - cereals and grains - water - powders - flour mills - concrete plants - glass works - food industry
ORDER CODESCODE POWER SUPPLY THREAD BODY PROBE NOTES
677-112-14 24 V d.c. ½” GAS Stainless steel AISI303 AISI 316 - D6 x L473 677-212-14 24 V d.c. ½” GAS Stainless steel AISI303 AISI 316 - D6 x L973 677-122-14 24 V d.c. ½” GAS Stainless steel AISI 316 AISI 316 - D6 x L473
Informations provided herein can be changed without notice. [677_E_CAT.doc] apr - 09
1
2
3
GND
677PNP
+ V d.c.
0 V
35
65L
DIN 43650-A
PTFE COVERING
1/2" GAS THREADED CONNECTION
BODY
STAINLESS STELLAISI 316 6mm
ELECTRODE
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1188
440 CONTINUOUS LEVEL TRANSMITTER 2 wire configuration
MECHANICAL DIMENSIONS
TECHICAL CHARACTERISTICS
• Sensor working: capacitive • Probe body: see table “ order codes ” • Thread: ½” GAS • Electric wiring: acoording to DIN 43650-A with PG11 cable gland• Protection class: IP65 • Electrode: stainless steel ø 8mm L=1000mm (standard) • Covering: 1 mm thick PTFE • Temperature: 120 °C on the electrode • Pressure: 25 bar • Weight: 1200 gr (for L=1000mm) • Power supply: 13 ÷ 30 V d.c. according to resistive load • Absorption: 0.6 VA • Output: 4 ÷ 20 mA, 2 wire configuration ( see wiring diagram ) • Precision: 0,5% f.s. after calibration at 25°C • Plug: 15mm not-sensitive end, at the bottom • Available versions for: water, oil, diesel fuel, liquids and powders
METAL TANK - WIRING DIAGRAM
INSULATING TANK - WIRING DIAGRAM
ORDER CODES CODE TEMPERATURE PRESSURE THREAD ELECTRODE NOTE S
440-005-04 120 °C 25 bar ½ " stainless steel AISI 303 - POM stainless steel; for L up to 500mm 440-010-04 120 °C 25 bar ½ " stainless steel AISI 303 - POM stainless steel; for L up to 1000 mm 440-015-04 120 °C 25 bar ½ " stainless steel AISI 303 - POM stainless steel; for L up to 1500 mm 440-020-04 120 °C 25 bar ½ " stainless steel AISI 303 - POM stainless steel; for L up to 2000 mm 447-010-04 120 °C 25 bar ½ " stainless steel AISI 316 - POM stainless steel; for L up to 1000 mm
Informations provided herein can be changed without notice. [440_E_CAT.doc] gen-13
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 1199
440 CONTINUOUS LEVEL TRANSMITTER (ROPE)TWO WIRE CONFIGURATION
MECHANICAL DIMENSIONS
TECHICAL CHARACTERISTICS
• Sensor working: capacitive • Probe body: see table “ order codes ” • Thread: ½” GAS • Electric wiring: acoording to DIN 43650-A with PG11 cable gland• Protection class: IP65 • Electrode: rope L=3000mm (standard) • Covering: PVC • Temperature: 60 °C on the electrode • Pressure: 25 bar • Weight: 800 gr (for L=3000mm) • Power supply: 13 ÷ 30 V d.c. according to resistive load • Absorption: 0,6VA • Output: 4 ÷ 20 mA, 2 wire configuration ( see wiring diagram ) • Precision: 0,5% f.s. after calibration at 25°C • Plug: 70mm not-sensitive end, at the bottom • Available versions for: water, oil, diesel fuel, liquids, powders
METAL TANK - WIRING DIAGRAM
INSULATING TANK - WIRING DIAGRAM
ORDER CODES CODE TEMPERATURE PRESSURE THREAD ELECTRODE NOTE S
440-330-04 60 °C 25 bar ½ " stainless steel AISI 303 - POM rope L= 3000mm
Informations provided herein can be changed without notice. [440_fune_E_CAT.doc] gen-13
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2200
451 CONTINUOUS LEVEL TRANSMITTER for HIGH TEMPERATURE – 3 wire configuration
MECHANICAL DIMENSIONS
TECHICAL CHARACTERISTICS
• Sensor working: capacitive • Probe body: stainless steel AISI 303 • Thread: ½” GAS • Electric wiring: according to DIN 43650-A with PG11 cable gland• Electrode: stainless steel covering • Covering: ø 12mm PTFE • Temperature: 215 °C on the electrode • Pressure: 20 bar • Weight: 1000 gr (for L=500mm) • Power supply: 24V d.c. ±10% • Absorption: 0.9 VA • Output: 4 ÷ 20 mA, [calibrated, with 3” delayed] Rmax = 250 Ω • Precision: 0,5% f.s. after calibration at 25°C • Plug: 25mm not-sensitive end, at the bottom • Available versions for: water, liquids • Water conductivity: ≥ 5µS/cm
METAL TANK - WIRING DIAGRAM
ORDER CODES CODE TEMPERATURE PRESSURE THREAD ELECTRODE NOTES
451-505-04 215 °C 20 bar ½ " stainless steel AISI 303 stainless steel; for L up to 500mm 451-510-04 215 °C 20 bar ½ " stainless steel AISI 303 stainless steel; for L up to 1000mm
Informations provided herein can be changed without notice. 451_5xx_E_CAT.doc ott-15
Vout [ test only ]
RL_
+
451
2 1 3
+ Vcc
I out
GND
Power supply 24 V d.c.
- RL <= 250 ohm
- shielded cable
- metallic tank
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2211
410 VOLTAGE OUTPUT POWER SUPPLY (for 44X-series level transmitter)
TECHNICAL CHARACTERISTICS
• Electric wiring: plug-in type; octal soket • Protection class: IP40 • Internal components: surface mounting tecnology (SMD) • Front led lamps: green, on power ON • Power supply: 24 or 110 or 230 V a.c. (on request) • Frequency: 50 – 60 Hz • Absorption: 5 VA • Input: 4÷20 mA • Z_input: 500 Ω • Output: 2÷10 V • Weight: 220 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
ORDER CODES
CODE POWER SUPPLY 410-000-0x x=1 24V; x=2 110V; x=3 230V a.c.
Informations provided herein can be changed without notice. [410_E_CAT.doc] ott-05
43,4
38 70
84
Power ON
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2222
411 CURRENT OUTPUT POWER SUPPLY (for 44X-series level transmitter)
TECHNICAL CHARACTERISTICS
• Electric wiring: plug-in type; octal soket • Protection class: IP40 • Internal components: surface mounting tecnology (SMD) • Front led lamps: green, on power ON • Power supply: 24 or 110 or 230 V a.c. , on request • Frequency: 50 – 60 Hz • Absorption: 5 VA • Input: 4÷20 mA • Output: 4÷20 mA • Z_load: ≤ 500 Ω • Z_input: 500 Ω • Weight: 220 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
ORDER CODES
CODE POWER SUPPLY 411-000-0x x=1 24V; x=2 110V; x=3 230V a.c.
Informations provided herein can be changed without notice. [411_E_CAT.doc ott-05
43,4
38 70
84
Pawer ON
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2233
412 CURRENT OUTPUT POWER SUPPLY (for 677-high-frequency level switch)
TECHNICAL CHARACTERISTICS
• Electric wiring: plug-in type; octal soket • Protection class: IP40 • Internal components: surface mounting tecnology (SMD) • Front led lamps: green, at power ON Red, at switch ON • Power supply: 24 or 110 or 230 V a.c. , on request • Frequency: 50 – 60 Hz • Absorption: 5 VA • Input: 4÷20 mA • Z_load: ≤ 500 Ω • Contact: (exchange) 5 A – 230V a.c. • Weight: 220 g
MECHANICAL DIMENSIONS
WIRING DIAGRAM
ORDER CODES CODE POWER SUPPLY
412-000-0x x=1 24V; x=2 110V; x=3 230V a.c.
Informations provided herein can be changed without notice. [412_E_CAT.doc] apr02
43,4
38 70
84
Power ON N.C.
N.O.
COM.
240 V.AC 5A (AC1)
ALIM.
+ 24V
Vin
0V
1
2
345
6
78
677
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2244
420 THRESHOLD SWITCH FOR SERIES 44X TRANSMITTERS
MECHANICAL DIMENSIONS
TECHNICAL CHARACTERISTICS
• Electric wiring: plug-in type; octal soket • Protection class: IP40 • Internal components: surface mounting tecnology • Input signal: 4 ÷ 20 mA • Front led lamps: green: power supply red: switch status • Contact: in exchange – 5 A – 230V a.c. • Power supply: 24 or 110 or 230 V a.c. • Frequency: 50 – 60 Hz • Absorption: 5 VA • Weight: 220 g •
WIRING DIAGRAM
ORDER CODES CODE DESCRIPTION POWER SUPPLY
420-000-0X Threshold switch for filling X=1 24V; X=2 110V; X=3 230V a.c. 420-001-0X Threshold switch for draining X=1 24V; X=2 110V; X=3 230V a.c. 420-002-0X Threshold switch for high level alarm X=1 24V; X=2 110V; X=3 230V a.c. 420-003-0X Threshold switch for low level alarm X=1 24V; X=2 110V; X=3 230V a.c.
Informations provided herein can be changed without notice. [420 con 44X_E_CAT.doc] ott - 05
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2255
210 Electronic self testing conductivity level alarm and block for minimum level
Conforming Directive 97/23/CE (PED) - certified B+D
TECHNICAL CHARACTERISTICS
• electronic working, digital signal processor (dsp) • double circuit with conductivity measurement, with
compensation electrode • 3 different self testing , 1 minute of periodicity • output relay; two user contacts in exchange 230 V-2.5A-AC1 • circuit of burner block at positive safety • numerical display with alarm coding • Minimum water conductivity: 0.5 µS/cm • Pushbutton/switch for manual test (optional) • Absorption is 8 VA
MECHANICAL DIMENSION
WIRING DIAGRAM
ORDER CODES . CODE CHARACTERISTICS POWER SUPPLY
210-200-0X Conductivity > 10 µS/cm X =1 24V a.c. - X =3 230Va.c. 210-210-0X Conductivity > 10 µS/cm with selector and test button X =1 24V a.c. - X =3 230Va.c. 210-202-0X Conductivity 0.5 ÷ 20 µS/cm X =1 24V a.c. - X =3 230Va.c. 210-212-0X Conductivity 0.5 ÷ 20 µS/cm with selector and test button X =1 24V a.c. - X =3 230Va.c.
Informations provided herein can be changed without notice. [210_200_E_CAT.doc] ott - 15
RL2RL1
15NC NACom
87 10 119 13 146NC4 5
NA2 31
Com
3
12
800
12
female connector
safety probe type 800
Female connector
Power supply
Tipycal cable: 4 x 0,5 mm^2 or 4 x 0,25 mm^2+ shield 3m <=L<= 50m
WARNING, to the clamps #13 and #14, connect only cables coming from the probe 800
SERIE - 210-2XY-0Z
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2266
211 Electronic self testing conductivity level alarm and block for maximum level
Conforming Directive 97/23/CE (PED) - certified B+D
TECHNICAL CHARACTERISTICS
• electronic working, digital signal processor (dsp) • double circuit of measure to conductivity, with compensation
electrode • 3 different self testing , 1 minute of periodicity • output relay; two contacts in exchange 230 V-2.5A-AC1 • extractable terminal block • positive safety alarm and block • numerical display with coding of the alarms • Minimum water conductivity: 0.5 µS/cm • Pushbutton / switch for manual test (optional)
MECHANICAL DIMENSION
WIRING DIAGRAM
ORDER CODES . CODE CHARACTERISTICS POWER SUPPLY
211-200-0X Conductivity > 100 µS/cm X =1 24V a.c. - X =3 230Va.c. 211-210-0X Conductivity > 100 µS/cm with selector and test button X =1 24V a.c. - X =3 230Va.c. 211-202-0X Conductivity 0.5 ÷ 20 µS/cm X =1 24V a.c. - X =3 230Va.c. 211-212-0X Conductivity 0.5 ÷ 20 µS/cm with selector and test button X =1 24V a.c. - X =3 230Va.c.
Informations provided herein can be changed without notice. [211_200_E_CAT.doc] giu - 10
RL2RL1
15NC NACom
87 10 119 13 146NC4 5
NA2 31
Com
3
12
800
12
female connector
safety probe type 800
Female connector
Power supply
Tipycal cable: 4 x 0,5 mm^2 or 4 x 0,25 mm^2+ shield 3m <=L<= 50m
WARNING, to the clamps #13 and #14, connect only cables coming from the probe 800
SERIE - 211-2XY-0Z
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2277
800 SAFETY PROBE Conforming to Directive 97/23/CE (PED) - certified B+D
MECHANICAL DIMENSION
TECHNICAL CHARACTERISTICS
• Sensor working: conductive • Probe body: stainless steel • Thread: ½” gas or ¾” gas • Electric wiring: DIN 43650-A with cable gland PG11 • Protection grade: IP 65 • Electrode: INOX –8MA male • TS: 239°C on the electrode • PS: 32 bar on the electrode • Weight: 400g • Material product controlled: water
WIRING DIAGRAM
ORDER CODES . CODE TEMPERATURE (TS) PRESSURE (PS) THREAD ELECTRODE NOTE
800-000-50 239 °C 32 bar ½ " inox AISI 303 Inox AISI 303 800-000-51 239 °C 32 bar ¾ " inox AISI 303 Inox AISI 303
ACCESSORIES ORDER CODES 999-800-05 Electrode for safety probe L = 500mm L = 500mm inox AISI 303 999-800-10 Electrode for safety probe L = 1000mm L = 1000mm inox AISI 303
Informations provided herein can be changed without notice. [800_CAT.doc] apr - 11
Electrode of reference
86
262
175distance tube
Connector DIN 43650A male
threaded connection 1/2" gasor 3/4" gas
Threaded electrode 8 MA
wrench 27 or 32
RL2RL1
15NC NACom
87 10 119 13 146NC4 5
NA2 31
Com
3
12
800
12
female connector
safety probe type 800
Female connector
Power supply
Tipycal cable: 4 x 0,5 mm^2 or 4 x 0,25 mm^2+ shield 3m <=L<= 50m
WARNING, to the clamps #13 and #14, connect only cables coming from the probe 800
SERIE - 210 / 211
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2288
999 WELDING SUPPORTS FOR PROBES AND MULTY-ELECTRODE HOLDERS FOR FOOD INDUSTRY
DESCRIPTION
Welding support for multiple probe These welding supports, for probes and multiple electrode holders with threaded attack by 1-½ " gas, allow easy installation and service, assuring waterproof sealing. The use of these supports, thanks to the O-ring seal, prevents material infiltration between threads, therefore avoiding bacteria problems. The hole to be made on the tank, should be 60 mm diameter.
Welding support for single probe These welding supports, for probes and multiple electrode holders with threaded attack by ½ " gas, allow easy installation and service, assuring waterproof sealing. The use of these supports, thanks to the O-ring seal, prevents material infiltration between threads, therefore avoiding bacteria problems. The hole to be made on the tank, should be 30 mm diameter.
MECHANICAL DIMENSIONS
5
21 28
1-1/2" gas
64
60 O-ring seal
1/2" gas32
30
522
O-ring seal
ORDER CODES CODE DESCRIPTION TEMPERATURE PRESSURE THREAD
999-050-00 welding supports for single 180 °C 25 bar ½” stainless steel AISI 303 999-090-00 welding supports for multiple 180 °C 25 bar 1-½” stainless steel AISI 303
Informations provided herein can be changed without notice. [ 999_E_CAT1 .doc] gen-09
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 2299
999 ELECTRODES AND SPACERS FOR MULTIPLE ELECTRODE HOLDERS FOR FOOD INDUSTRY
MECHANICAL DIMENSION 5.
2
6MA
6MA
15
1000
15
DESCRIPTION
This electrode has the purpose to extend the conductive end of the electrode holder, obtaining different levels for common, minimum and maximum. It is possible to join several modules, 1 meter long.
66MA
6MA
15
1000
15
This electrode has the purpose to extend the conductive end of the electrode holder, obtaining different levels for common, minimum and maximum. It is possible to join several modules, 1 meter long.
5,9
30
This spacer has the purpose to keep spaced the 6 mm diameter electrodes, when their length may cause a contact between them or with the tank.
ORDER CODES CODE DESCRIPTION MATERIAL
999-003-00 Electrode D5 mm, 2 thread 6MA Stainless steel 999-005-00 Electrode D6 mm thread 6MA Stainless steel AISI 316 999-006-00 Electrode D6 mm thread 6MA Titanium 999-053-00 D6 mm electrode spacer PTFE-glass doped
Informations provided herein can be changed without notice. [ 999_E_CAT2.doc] gen-09
ISO 9001 M . M . T . s.r.l. 26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
www.mmtitalia.com e-mail: info@mmtitalia.com
05/10/2015 3300
999 CAP AND JOINTS FOR SINGLE ELECTRODE HOLDERS
MECHANICAL DIMENSION
DESCRIPTION
These protections are used when the probes are not waterproof case and it is necessary to protect the wiring. They are of rigid or soft type (when only small space is available between probes).
SW8
15
SW8
15
These joints, with nuts and electrodes, allow to extend the sensitive end of the probes, to obtain the desired lengths.
ORDER CODES CODE DESCRIPTION MATERIAL
999-021-00 rigid protection Black nylon 999-021-03 Soft protection for series 390 Black EPDM 999-011-00 Joint 4MA x 6MA - SW 8 stainless steel 999-012-00 Joint 6MA x 6MA - SW 8 stainless steel
Informations provided herein can be changed without notice. [ 999_E_CAT3.doc] giu-08
top related