namkyung ind.,co

NAMKYUNG IND.,CO#1075 WOLAM-DONG, DALSEO-GU DAEGU, KOREA

TEL) 82 53 592 1070,1071 FAX) 82 53 592 1072 WEBPAGE : www.nkfastener.com Email : namkyung@nkfastener.com CONTACT POINT : Brian Kang

NK FASTENER’S PRODUCTS INTRODUCTION OF SPECAILIZED ITEMS

2006. 5. 02

LIST1. PLASTIC COLLATION NAILS 1.15 DEGREE PLASTIC SHEET COIL NAILS(FAP) 2.15 DEGREE PLASTIC SHEET COIL NAIL’S HEAD TYPES 3.15 DEGREE PLASTIC SHEET COIL NAIL’S POINT TYPES & FOR USE IN 4. 0 DEGREE PLASTIC SHEET COIL NAIL(Glue Coating & Finish type) 5. 21 DEGREE PLASTIC COLLATION FENCING & SIDING NAILS.

2. DRYWALL SCREW

3. HELPER TYPE COLLATED SCREW MACHINE

1.15 DEGREE PLASTIC SHEET COIL NAIL(FAP)

* FAPHardened E.Galvanised screw shank Hot Dip Galvanised Stainless Steel*SHANK TYPESScrew, Fluted And Others

* FAP APPLICATIONS.Wood to steel.Steel FramingSheet Flooring to Steel JoistHard wood & Decking to steel JoistAnd others

2.15 DEGREE PLASTIC SHEET COIL’S HEAD TYPES

• MAIN HEAD TYPES OVAL(DOME) HEAD CUP HEAD AND LIKE BELOW

*Dome Head is allowed to rest at the

surface of the board, not under it from nail guns

*Below head types are applied to other items

3.15 DEGREE PLASTIC SHEET COIL NAIL’S POINT TYPES & FOR USE IN

• For Use In : Max CN565S

Makita AN611 Hitachi NV65AH And other

tools

• Available points are like below

drawings* Below point types are

applied to other items

4.O DEGREE PLASTIC SHEET COIL NAIL

(Glue Coating & Finish Type)• For use in :Duo Fast CNP-60Y CNP-65Y RCN60/225ADJ&HN-500A And other tools

Glue Coating (Similar to Sen-cote)

: to increase holding power, anticorrosion and so on, we are doing glue coating on our nails as per your request.* FINISH TYPE ELECTRO GALVANISED. HOT DIP GALVANISED DACROTISED MECHANICAL STAINLESS STEEL ALUMINUM AND OTHERS

• Above finish types are available for our all collated nail products

5.Packing/Ctn and Applications of 15 & 0 Degree Plastic Sheet Coil

Nails

* Sizes & Diameter:Please Refer to our webpage• Main Packing1. 15 degree PCS(Max type) : 6M/CTN 2. 0 degree PSC(Duo-Fast type) : 7.2M/CTN• Packing could be changeable as per Customer’s request.

Applications : Decking. Tripple GripTriming. HardiboardFencing and siding and others

6.21Degree Plastic Collation Fencing & Siding Nail

• For Use in : Hitachi VH650

Hitachi NV50AA and other tools.

• Nail Size Range : As per your request.

Refer to webpage

* Applications: Mainly using for Fencing & Siding

and others

- Special feature ; This collation nail is consist of mainly

300nails / coil so you can make you work much longer than plastic strip nail as a result you can save your time and efforts when you are working.

DRYWALL SCREW

Types. -Sharp point (Black/Zinc) -S.D.S (Zinc) -High Low -Coarse Thread -Collated Screw (sharp S.D.S) And Others.

Main Sizes.#6(3.5mm) x 19, 32, 38, 42, 50,

65#8(4.2mm) x 50, 65, 75#7(3.9mm) x 50• We are providing many kinds

of screws as per your request.

Helper type collated screw’s Machine

• Special Feature: It allows to collate up to 1,000 screws per min as a result you could save your time and efforts to make helper type collated screws.

• We also make plastic band for 15 & 0 degree plastic sheet coil nails, various kind

s of collated screws and others in our factory.

-The End-If you need any kinds of product informationthat we are making in our factory, feel free tocontact us at any time.Thank you. Brian Kang. namkyung@nkfasteners.com nkkgs@hanmail.net