pppoe!setup!for!! nf2/!nf5/nf7! … setup...pppoe setup for netcomm wireless routers author: phillip...
Post on 19-May-2018
218 Views
Preview:
TRANSCRIPT
Quick Start Guide
PPPoE Setup for NF2 / NF5 /NF7
Netcomm Wireless Routers
NF5
Quick Start Guide
CONFIGURING YOUR NEW BOOM BROADBAND NBN CONNECTION Your NBN service will now be provided through the UNI-D2 port on the NBN Connection Box. You will need to ensure your router is plugged into this port. Simply unplug the Ethernet cable from the current port and transfer to the UNI-D2 port. Once the router is plugged into the UNI-D2 port you will then need to configure the PPPoE Username and Password by following the instructions below: CONNECTING THE ROUTER TO THE INTERNET
1. Open your Web browser and type http://192.168.20.1 into the address bar at the top of the web browser window and press Enter.
2. Enter admin into both the username and password fields and click Login.
A. If the “First-‐Time Setup Wizard” is displayed, click the No thanks, take me to the Basic Interface button to configure your NetComm Wireless Router.
B. If the “First-‐Time Setup Wizard” is not displayed continue on to Step 3.
3. Select the WAN tab from the left hand side of the screen. WAN: 1. Select the WAN type PPPoE (PPP over
Ethernet) and enter details as supplied in your activation email.
These usually look like this – Username: yourname@boombroadband.com.au Password: a1b2c3d4e5
(This is the default password)
2. After entering the required details, click
Save and apply the changes.
top related