schaliegas verslag
Post on 14-Apr-2018
221 Views
Preview:
TRANSCRIPT
-
7/28/2019 schaliegas verslag
1/23
DAGBOEK
Over de hele wereld zijn regeringen bezig met schaliegas. Economische zaken spelen hierin een
grote rol. Het ene land gaat helemaal voor de economische voordelen van het schaliegas terwijl
andere landen veiligheid voorop stellen. Het overzicht hieronder laat zijn hoe verschillende landen
over schaliegas denken met informatie uit nieuwsartikelen. Het geeft ook een duidelijk beeld over
hoe de discussie over schaliegas in Nederland is gelopen. Vanaf de eerste pessimisten tot ministerKamp die graag wil gaan boren maar nog meer steun nodig heeft. Het hele proces wordt duidelijk
door nieuwsartikelen op een rijtje te zetten.
POLEN
10 juli 2013
De verwachtingen van schaliegas in Polen waren heel groot. Polen hoopte erop dat het land rijk zou
worden van het aardgas. Het tegendeel blijkt waar. Er zijn veel bedrijven die veel hebben
genvesteerd maar nu uit het land vertrekken. Dit komt door de overheidsregelingen die het allemaal
heel moeilijk maken voor de bedrijven. Het is niet duidelijk voor de bedrijven of ze hunopsporingsvergunningen kunnen omzetten zodat ze ook echt kunnen gaan boren.
FRANKRIJK
14 juli 2013
Francois Hollande zegt dat zolang hij president is, er geen schaliegas wordt gewonnen in Frankrijk.
In 2011 is er al een wet ingevoerd die ervoor zorgt dat er geen schaliegas gewonnen mag worden.
Schuepbach Energy is een bedrijf dat vergunningen had om te gaan boren in Frankrijk voordat de
wet tegen het boren werd ingevoerd. Het bedrijf gaat nu een rechtzaak aan tegen het verbannen van
schaliegas boren.
AMERIKA
16 juli 2013
Amerika is allang bezig met het winnen van schaliegas. Nu gaat het voor het eerst gexporteerd
worden. Het schaliegas wordt naar Engeland gebracht door een bedrijf dat eigenlijk was opgericht
om aardgas te importeren. Het exporteren lijkt voor het bedrijf nu veel voordeliger. Het bedrijf Shell
is heel enthousiast over het schaliegas in Amerika en laten weten dat er veel potentie is.
ENGELAND
12 augustus 2013
Cameron steunt de winning van schaliegas compleet. Hij zegt dat het een mythe is dat het gevaarlijk
is. Ook zijn de economische voordelen heel groot in zijn ogen. Schaliegas winnen zorgt
bijvoorbeeld voor nieuwe banen.
NEDERLAND
28 december 2012
Het wordt duidelijk dat de Verenigde Staten heel onafhankelijk worden op het gebied van gas omdat
-
7/28/2019 schaliegas verslag
2/23
ze zelf schaliegas boren. Dit geeft een signaal af over de hele wereld dat het financieel heel goed is
om schaliegas te boren.
9 maart 2013
De economische achterstand door het afwachtende gedrag op het gebied van schaliegas wordt
zichtbaar. Er is meer werkloosheid, dat zou opgelost kunnen worden door het boren van schaliegas.
Ook wordt gezegd dat Europa binnen twintig jaar onafhankelijk gas kan winnen door schaliegas tewinnen.
12 april 2013
Waterbedrijf Vitens waarschuwt voor de risico's van schaliegas boringen. Het bedrijf meldt dat
boringen het drinkwater kunnen vervuilen, bij een ramp zou het zelfs de levering van drinkwater in
gevaar kunnen brengen. Het bedrijf dat proefboringen doet zegt het tegenovergestelde. Ze meldt dat
de boringen veilig zijn door alle kennis over de bodem en het boren.
17 april 2013
bierbrouwers en frisdrankfabrikanten beginnen zich er ook mee te bemoeien. Ze sluiten zich aan bij
Vitens over het risico van de grondwatervervuiling. De minister van economische zaken, Henk
Kamp, zegt ook dat het economische belang bij schaliegas niet heel groot is. Er zou jaarlijks een
paar honderd miljoen kunnen worden verdiend terwijl er jaarlijks al twaalf miljard aan aardgas
wordt verdient.
24 april 2013
Er was eerst geen meerderheid in de tweede kamer voor de schaliegaswinning. Nu laat Pvda weten
positief tegenover de winning van schaliegas te staan. De leden van het Pvda willen wel dat er
veilig geboord wordt en goed met de chemicalin die vrij komen omgegaan wordt. Ze hebben
vertrouwen dat er door de nieuwe technieken schoon en veilig schaliegas gewonnen kan worden.
27 april 2013
De Pvda komt samen voor een ledencongres in Leeuwarden. Het blijkt dat de meningen over
schaliegas toch nog uiteen lopen binnen de partij. Bijvoorbeeld Judith Merkies laat weten de risico's
nog te groot te vinden. Dit kan ervoor zorgen dat er in de tweede kamer nog geen meerderheid is.
29 april 2013
De Pvda legt het schaliegas besluit voor aan de leden. De kamerfractie ging al akkoord metproefboringen maar daarna zei het congres dat ze tegen de proefboringen zijn. Tweedekmaerlid Jan
Vos wil nog steeds dat er wel strenge eisen worden gesteld aan de proefboringen en dat er eerst nog
een onderzoek moet komen. De leden gaan nu dus bepalen wat de Pvda gaat besluiten.
1 mei 2013
Diederik Samson heeft gemeld dat de Pvda tegen de proefboringen gaan stemmen. Dat hebben de
leden besloten. Dit betekent dat de tweede kamer geen meerderheid meer heeft. Wel laat Diederik
Samson weten dat dit besluit niet definitief is. Als de technieken beter en veiliger worden legt de
Pvda de kwestie opnieuw aan de leden voor.
25 juni 2013
-
7/28/2019 schaliegas verslag
3/23
Een Amerikaanse studie heeft bewezen het winnen van schaliegas ervoor kan zorgen dat er methaan
in het drinkwater komt. Dit is een gevaarlijke stof die de waterzuivering ook verstoort. Ijzer wordt
slechter uit het water gehaald door de aanwezigheid van methaan. Het Amerikaanse onderzoek heeft
waterputten in de buurt van schaliegasputten. In het water uit de waterputten die in de buurt lagen
van de schaliegasputten zat een methaanconcentratie die zes keer hoger was dan bij de putten die
niet in de buurt lagen van schaliegasputten.
Net voordat dit onderzoek gepubliceerd werd spraken 55 hoogleraren uit Nederland zich uit over
schaliegas in Nederland. De hoogleraren zeggen dat schaliegas niet interessant is voor Nederland.
In het manifest waarin ze zichzelf uitdrukken staat dat het schaliegas in Europa veel dieper zit dan
in Amerika, dit zorgt voor hoge ecologische risico's en lastige winning van het gas. Ook zijn de
voorraden schaliegas helemaal niet groot, dit maakt het ook minder voordelig om te boren.
Minister Kamp wil een eigen onderzoek laten uitvoeren die op de voor en nadelen van
schaliegaswinning duidt. Hij wil ook zelf de resultaten van het onderzoek eerst zelf bekijken
voordat hij het geeft aan de klankbordgroep schaliegas. De klankbordgroep bestaat uit gemeentes,
provincie, belanggroepen en bedrijven.
De klankbordgroep is boos geworden op minister Kamp. Hij wou dat leden van de klankbordgroep
een geheimhoudingsverklaring moesten ondertekenen. Als ze dat niet zouden doen worden ze uit de
klankbordgroep gezet. Leden zijn al aan het opstappen omdat ze voor een open debat zijn.
1 juli 2013
Het onderzoek dat minister Kamp heeft laten uitvoeren laat belangrijke kwesties achterwege.
Drinkwater om het belang van de omwonenden worden niet gemeld in het rapport.Binnenkort wordt
het onderzoek vrijgegeven aan de klankbordgroep. Hiervan zijn nog 4 van de 12 leden over door het
tekenen van een geheimhoudingsverklaring. De commissie die minister Kamp adviseert wil dat het
onderzoek uitgebreid wordt omdat er belangrijke zaken ontbreken.
De Rabobank leent geen geld meer aan bedrijven en particulieren die zich bezig houden met
schaliegasboringen. Particulieren die hun grond uitlenen om schaliegas te winnen krijgen dus ook
geen krediet meer. Deze keuze is gemaakt omdat de Rabobank zich niet wil bezighouden met
milieuvervuiling. Rabobank is nog wel lid van de klankbordgroep.
23 augustus 2013
Het kabinet had vandaag een discussie over schaliegas, er is besloten om volgende week een besluit
te nemen. Het kabinet wil in de loop van deze week naar de tweede kamer stappen.
26 augustus 2013
Minister Kamp heeft samen met het kabinet besloten om nog geen beslissing te maken. Kamp
wacht eerst nog op meer advies van deskundigen. Ook het advies van de commissie wordt
afgewacht. Dat komt rond eind september.
Uit een onafhankelijk onderzoek blijkt dat de risico's van schaliegaswinning in controle kunnen
worden gehouden. Het enige grote risico is de vervuiling van het drinkwater.
Minister Kamp laat op een persconferentie weten dat hij een voorstander is van schaliegaswinning.Hij zegt "Als schaliegas op een verantwoorde manier gewonnen kan worden, moeten we dat doen."
Hij geeft toe dat er risico's zijn maar zegt wel dat die risico's beheersbaar zijn. Ook laat hij weten
-
7/28/2019 schaliegas verslag
4/23
dat het van economisch belang is om schaliegas te winnen. Het zorgt ervoor dat Nederland geen
aardgas hoeft te importeren.
-
7/28/2019 schaliegas verslag
5/23
THEORIE
KLIMAAT
Obama heeft schaliegas in kaart gebracht door te zeggen dat het minder broeikasgassen uitstoot dan
andere aardgassen. Wetenschappers zeiden meteen al dat Obama voorzichtig moest zijn. In 2010
stuurt een organisatie die 1,4 miljoen wetenschappers vertegenwoordigd een brief naar Obama.
Hieraan staat dat schaliegas een groter effect op de opwarming van de aarde heeft dan wat eerder
was geschat.
Later in 2010 is er een nieuw rapport van de U.S. Environmental Protection Agency (EPA). Dit is
het eerste rapport over broeikasgassen en hun uitstoot sinds 1996. In dit rapport staat dat schaliegas
meer methaan uitstoot dan gerbruikelijk aardgas. Maar het stoot nog steeds veel minder methaan uitdan steenkool. Methaan blijkt een veer sterker broeikasgas te zijn dan carbondioxide. Het blijft wel
een stuk korter in de atmosfeer. Namelijk een tiende van de tijd dat carbondioxide in de atmosfeer
blijft. Maar alsnog zorgt het methaan voor meer opwarming van de aarde. Als je carbondioxide
vergelijkt met methaan zie je dat over een periode van twintig jaar methaan een impact heeft die
105 keer groter is dan die van carbondioxide. Methaan verdwijnt dus wel eerder uit de atmosfeer
maar na honderd jaar is de impact van methaan nog steeds 33 keer groter. Deze gegevens kloppen
als je evenveel massa van de stoffen neemt. Naast deze gegevens zegt de U.N. Dat de getallen 105
en 33 niet kloppen en dat het 72 en 25 moet zijn. Dit is nog steeds veel meer uitstoot dan
carbondioxide.
Een onderzoek in 2011 zegt dat elektriciteit gemaakt met behulp van schaliegas meer invloed heeftop het klimaat dan elektriciteit geproduceert met olie of steenkool. Cornell University laat zien dat
als je een lek meerekent in deze berekeningen, schaliegas veel meer broeikaseffect heeft dan
steenkool over een periode van twintig jaar na de uitstoot. Andere onderzoekers bekritiseren dit
onderzoek. Ze vinden dat twintig jaar een te korte periode is om te zeggen wat meer uitstoot. Ook
zijn er onderzoekers die op compleet andere resultaten uitkomen en fouten in het onderzoek van
Cornell University hebben gevonden.
In april in 2013 geeft de U.S. Environmental Protection Agency aan dat de geschatte
methaanlekkage veel te hoog was. Ze verminderen de schatting van het volume methaan dat lekt in
het hele proces van schaliegas maken met 20 procent. Deze daling komt door de strengere controle
op vervuiling. Door deze controle is er de afgelopen 20 jaar 850 miljoen vierkante meter minder
methaan gelekt dan verwacht. Er wordt veel meer schaliegas geboord dan in 1990 in America,
namelijk 40 procent meer per jaar. Desondanks is de uitstoot van methaan flink gedaald. Dit komt
door de betere technieken en de betere controle op veilig boren.
-
7/28/2019 schaliegas verslag
6/23
WATER
Er wordt veel water gebruikt tijdens het schaliegas boren. Hierdoor kan het water niet meer gebruikt
worden als drinkwater. Bijvoorbeeld een stadje in Texas is 104 volle waterputten armer doordat het
water is gebruikt om schaliegas te boren. Omdat het zoveel water kost om te boren is het
onverstandig om het te doen in hele droge gebieden. Water is al zeldzaam genoeg in die gebieden,
als er heel veel water wordt opgemaakt om schaliegas te winnen is dat verspilling van een eerste
levensbehoefte en het zou kunnen leiden tot een tekort. Er moet dan teveel water uit verre bronnen
komen. Dat zou het buizensysteem niet aankunnen.
Het volume water dat wordt gebruikt om schaliegas te boren is enorm hoog. Voor het fraccen is al
4,5 tot 13 miljoen liter water per put nodig in America. Hele grote projecten gebruiken zelfs 19
miljoen liter water. Voor het refraccen is nog eens heel veel water nodig. Alles bij elkaar opgeteld
heeft een put in America tussen de 11,4 tot 30,3 miljoen liter water nodig. Het probleem is dat er in
europa ongeveer 1,5 keer zo diep moet worden geboord, dat zorgt ervoor dat er nog veel meer water
in europ nodig is dan in America.
In het gebruikte water zitten chemicalin. Die chemicalin zijn vaak niet goed voor de bodem dus
moeten ze opgevangen worden. Er zit in het water gemiddeld 0,5 procent chemicalin. Dit lijkt niet
veel maar als je kijkt naar de extreme hoeveelheden water dat wordt gebruikt wordt het toch wel
veel. Natuurlijk wordt het meeste water opgevangen. Het opgevangen water is ongeveer 50 tot 70
procent van al het water dat wordt gebruikt. Als er voor een put gemiddeld 20 miljoen liter water
nodig is en 40 procent in de grond achterblijft is dat 8 miljoen liter. Hiervan 0,5 procent is 40000
liter. Dit betekent dat er gemiddeld per put 4x10^4 liter aan chemicalin in de grond blijft zitten.
Deze chemicalin bevatten bijvoorbeeld zware metalen die het drinkwater erg vervuilen.
Onderzoeken hebben dit allemaal aangetoond maar een hoop instanties die winst willen maken aan
schaliegas ontkennen nog steeds de risico's.
Er zijn verschillende oplossingen voor het waterprobleem. Een van de oplossingen is om simpelweg
het water te recyclen zodat het weer gebruikt kan worden. Dit lost het probleem dat er extreem veel
water nodig is op want er hoeft veel minder nieuw water aangeleverd te worden. Een andere
oplossing is om carbondioxide te gebruiken in plaats van water. Het bedrijf Gasfrac heeft nog een
manier gevonden om de vervuiling te verminderen. Er kan in plaats van water propaangas gebruikt
worden. Wel in een vloeibare vorm. Dit zou moeten zorgen voor minder vervuiling.
In mei 2011 is er een onderzoek geweest dat heel duidelijk de aanwezigheid van brandbaar methaan
heeft aangetoond in waterputten in de buurt van schaliegasputten. Dit is aangetoond in zuidoost
Pennsylvenie. Het probleem van het onderzoek is dat het maar een gebied heeft onderzocht. Ditbewijst dus niet dat de vervuiling in andere gebieden ook plaatsvindt of zal plaatsvinden.
Een nieuw onderzoek in juni laat zien dat in het gebied waar de methaan vervuiling gevonden is
anders wordt gefracked dan in andere gebieden. Dit toont aan dat het onderzoek niet voldoende was
om iets te kunnen concluderen.
Het Massachusetts Institute of Technology zegt na een onderzoek te hebben gedaan dat de risico's
van schaliegas boren beheersbaar zijn. Er is echter een onderwerp waar nog geen duidelijkheid over
is. Het methaan zou hoger liggende zoetwaterbronnen kunnen binnendringen. Het is lastig om dit te
onderzoeken omdat er nu al methaan in het grondwater zit door een aantal ongebruikelijke
boringen. Door het aanwezige methaan is het lastig aan te tonen of er op andere plekken ookmethaan lekt.
-
7/28/2019 schaliegas verslag
7/23
De EPA heeft eind juli 2012 een onderzoek gedaan bij particuliere drinkputten. Hierin zijn
gevaarlijke stoffen gevonden. Bijvoorbeeld arseen, barium en mangaan. Bij deze drinkputten is ter
plekke een zuiveringsinstallatie genstalleerd. Dit onderzoek heeft maar een gebied onderzocht dus
het zegt niks over andere lekkages.
LUCHT
When petroleum crude oil is extracted and produced from onshore or offshore oil wells,raw natural gas associated with the oil is produced to the surface as well. One gas which iscommonly flared ishydrogen sulfide, which is an irritant and a chemical asphyxiant that can alterboth oxygen utilization and the central nervous system, according to the U.S.OSHA.[92] Excessive H2S production in previously nonsour environments are "primarily anthropogenicand caused by certain operational practices".[93] In areas of the world lackingpipelines and othergas transportation infrastructure, vast amounts of suchassociated gas are commonly flaredaswaste or unusable gas. In June 2013, the Enbridge corporation obtained an order to reject from itssystem crude that had high levels ofsour gas.[92]Enbridge had found in one instanceconcentration levels of 1,200ppm.[92] The US FERC regulator sets 10ppm as a maximum for this
noxious gas. A concentration 120 times as high "could cause death, or serious injuries".[92]
A Pennsylvania family was forced to abandon because of fracking pollution of their 10-acre farm.
The family was paid 750,000USD by Range Resources Corporation to depart from a more recently
installed petroleum well plant, though the family was oddly required to sign an agreement which
stated that they now nor ever will suffer any adverse medical effects from the toxic exposure.[94]
The air emissions from hydraulic fracturing are also related to methane leaks originating from
wells, and emissions from the diesel or natural gas powered equipment such as compressors,
drilling rigs, pumps etc.[51] Also transportation of necessary water volume for hydraulic
fracturing, if done bytrucks, can cause high volumes of air emissions, especially particulate
matter emissions.[95] There are also reports of health problems around compressors
stations[96] or drilling sites,[97] although a causal relationship was not established for the limited
number of wells studied[97]and another Texas government analysis found no evidence of effects.
[98]
Natural gas produced by hydraulic fracturing causes higher well-to-burner emissions than gas
produced from conventional wells. Although a recent report coauthored by researchers at the U.S.
Department of Energys National Renewable Energy Laboratory [99] found emissions from shale
gas, when burned for electricity, were very similar to those from so-called conventional well
natural gas, hydraulic fracturing's higher emissions profile is mainly due to the gas released
during completing wells as some gas returns to the surface, together with the fracturing fluids.
Depending on their treatment, the well-to-burner emissions are 3.5%12% higher than for
conventional gas.[80] Other studies have found different effects, and a debate has arisen
particularly around a study by professor Robert W. Howarth finding shale gas significantly worse
for global warming than oil or coal[100] and various others criticizing the analysis.[101]
[102] Howarth has responded that "The latest EPA estimate for methane emissions from shale gas
falls within the range of our estimates but not those of Cathles et al., which are substantially
lower."[103]The U.S. EPA has estimated the methane leakage rate to be about 2.4% well below
Howarths estimate. The American Gas Association, and industry trade group, calculated a 1.2%
leakage rate [104]based on the EPA's latest greenhouse gas inventory, although the EPA has not
publicly stated a change to its prior estimate.
http://en.wikipedia.org/wiki/Crude_oilhttp://en.wikipedia.org/wiki/Oil_wellshttp://en.wikipedia.org/wiki/Natural_gashttp://en.wikipedia.org/wiki/Hydrogen_sulfidehttp://en.wikipedia.org/wiki/Occupational_Safety_and_Health_Administrationhttp://en.wikipedia.org/wiki/Occupational_Safety_and_Health_Administrationhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-onepetro-93http://en.wikipedia.org/wiki/Pipelineshttp://en.wikipedia.org/wiki/Pipelineshttp://en.wikipedia.org/wiki/Infrastructurehttp://en.wikipedia.org/wiki/Associated_gashttp://en.wikipedia.org/wiki/Gas_flarehttp://en.wikipedia.org/wiki/Gas_flarehttp://en.wikipedia.org/wiki/Enbridgehttp://en.wikipedia.org/wiki/Sour_gashttp://en.wikipedia.org/wiki/Sour_gashttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Ppmhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Federal_Energy_Regulatory_Commissionhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Range_Resourceshttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-guardian5aug-94http://en.wikipedia.org/wiki/Methanehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Truckhttp://en.wikipedia.org/wiki/Truckhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-BMP-95http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DISH_TX_SciAm-96http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DISH_TX_EHP-97http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DISH_TX_EHP-97http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DISH_TX_EHP-97http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-TexasDSHS-98http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-LoganJeffrey-99http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-WEO2011full-80http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-howarth-100http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-howarth-100http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Cathles-101http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-ipsnewsShale-102http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Howarth3-103http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Howarth3-103http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-McCurdyDave-104http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-McCurdyDave-104http://en.wikipedia.org/wiki/Oil_wellshttp://en.wikipedia.org/wiki/Natural_gashttp://en.wikipedia.org/wiki/Hydrogen_sulfidehttp://en.wikipedia.org/wiki/Occupational_Safety_and_Health_Administrationhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-onepetro-93http://en.wikipedia.org/wiki/Pipelineshttp://en.wikipedia.org/wiki/Infrastructurehttp://en.wikipedia.org/wiki/Associated_gashttp://en.wikipedia.org/wiki/Gas_flarehttp://en.wikipedia.org/wiki/Enbridgehttp://en.wikipedia.org/wiki/Sour_gashttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Ppmhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Federal_Energy_Regulatory_Commissionhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bloomberg13aug-92http://en.wikipedia.org/wiki/Range_Resourceshttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-guardian5aug-94http://en.wikipedia.org/wiki/Methanehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Truckhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-BMP-95http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DISH_TX_SciAm-96http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DISH_TX_EHP-97http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DISH_TX_EHP-97http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-TexasDSHS-98http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-LoganJeffrey-99http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-WEO2011full-80http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-howarth-100http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Cathles-101http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-ipsnewsShale-102http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Howarth3-103http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-McCurdyDave-104http://en.wikipedia.org/wiki/Crude_oil -
7/28/2019 schaliegas verslag
8/23
AARDBEVINGEN
Een grote reden voor de protesten tegen schaliegas is de kans op aardschokken. Vooral mensen die
in de buurt wonen van de plekken waar proefboringen zouden kunnen plaatsvinden zijn tegen de
boringen om die reden. De plaatselijke bevolking wil niet dat hun woonomgeving aangetast wordt.
Als er meer aardschokken gaan komen zorgt dat voor een slechtere leefkwaliteit. Ook zullen
bijvoorbeeld de prijzen van huizen in die omgeving dalen.
Op 26 april in 2012 hebben onderzoekers aangegeven dat het aantal aardbevingen van 3 op de
schaal van richter en groter flink is toegenomen. Er waren in 2011 zes keer zoveel aardbevingen dan
in 2001 die evensterk of sterker waren dan 3 op de schaal van richter. Dit onderzoek was inAmerika en is natuurlijk niet direct te linken aan de boringen naar schaliegas maar als dat wel de
grootste factor blijkt te zijn geweest in de groei van het aantal aardbevingen heeft het dus duidelijk
een significant effect.
Ook in Engeland was er een aardbeving die meteen werd gelinkt aan het schaliegas boren. Het
bedrijf Cuadrilla Resources dat zich bezighoudt met schaliegas produceren moest de productie even
stopzetten omdat er onderzoek nodig was voordat ze verder mochten gaan.
Als we naar de feiten kijken blijkt het risico op aardbevingen door fraccen echter heel erg klein. Op
19 juni 2012 heeft Dr. Murray Hitzman, professor op het gebied van geologie, geconstateerd dat er
in Amerika 35000 schaliegasputten zijn. Bij een van deze 35000 gevallen is er een aardbeving
geweest die met het boren te maken zou kunnen hebben. In dit geval is dat nog niet eens zekervastgesteld. Als we over de hele wereld kijken is er maar een incident waar een aardbeving direct
gelinked is aan het produceren van schaliegas. Dit was is Engeland bij Blackpool. Het aantal
aardbevingen in vergelijking met het aantal schaliegasputten is heel erg klein, dit laat zien dat het
risico van aardbevingen door schaliegasboringen ook heel klein is.
Het feit dat er geen aardbevingen gevoeld zijn betekent niet dat ze er niet zijn. Fraccen zorgt
constant voor hele kleine aardschokken die niet meetbaar zijn behalve met hele gevoelige
instrumenten. Deze aardschokken hebben een voordeel, doordat ze plaatsvinden kunnen mensen
berekenen hoever er horizontaal en verticaal fraccen heeft plaatsgevonden. Van deze aardschokken
hebben mensen geen last dus ze zijn ook geen risico voor de leefomgeving.
Er zijn nu dus twee kanten van het verhaal. Aan de ene kant zijn er veel meer aardbevingen geweest
in Amerika die groter of gelijk aan drie op de schaal van richter waren. In 2011 waren er zes keer
meer dan in 2001. Dit zou lijken op een erg vergroot risico door het fraccen maar het probleem is
dat maar twee van deze aardbevingen direct gelinkt zijn aan het fraccen. Er zou dus ook een andere
oorzaak kunnen zijn voor de toename in aardbevingen. Het is duidelijk dat fraccen wel kleine
aardschokken veroorzaakt. Dit komt doordat een grote hoeveelheid water in de grond wordt
gepompt, hierdoor gaat de druk in de grond omhoog en vinden kleine aardbevingen plaats. Er
kunnen echter helemaal geen conclusies worden getrokken behalve dat het in ieder geval heel af en
toe kan voorkomen dat een aardbeving wordt veroorzaakt door het produceren van schaliegas.
-
7/28/2019 schaliegas verslag
9/23
ECONOMIE
Nederland is altijd een export land geweest als het aankomt op aardgassen. De bronnen beginnen
echter op te raken en Nederland uiteindelijk niet meer haar eigen aardgassen kunnen produceren.
Nederland zal dus moeten gaan exporteren. Door schaliegas op te boren zou dit probleem verholpen
kunnen worden. We weten echter niet hoeveel schaliegas er precies opgeboord kan worden en
hoeveel winst daar uit gemaakt kan worden. Minister Kamp van financin heeft echter veel
vertrouwen in het economische voordeel dat schaliegas zal leveren. Om een realistisch beeld te
krijgen van hoeveel schaliegas kan opleveren gaan we kijken naar de situaties in Amerika en
Engeland waar al voor een lange tijd schaliegas wordt opgeboord. Amerika gaat zelfs beginnen met
schaliegas exporteren over de zee. Het land is veel verder dan Nederland dus daar is de situatiebeter te bekijken.
Er wordt in America al meer dan 100 jaar schaliegas geproduceert. Dat gebeurde terwijl er niet veel
winst mee gemaakt kon worden. Nu zijn de prijzen naar aardgassen gestegen en de technieken om
schaliegas op te boren zijn veel voordeliger geworden. Deze factoren zorgen ervoor dat er veel meer
winst gemaakt kan worden met de productie van schaliegas. Sinds juni 2011 beginnen mensen zich
serieus af te vragen of het economisch wel echt zo rendabel is. Fraccen kost veel geld en daardoor
kost het meer om schaliegas te produceren dan andere aardgassen. Ook moet er bij de productie van
schaliegas horizontaal geboord worden. Dit brengt veel kosten met zich mee. Deze kosten nemen
niet weg dat als de andere bronnen op zijn, het nog steeds winst kan opleveren.
We kijken even naar Engeland. In de grond van Engeland ligt geschat 7,2 biljoen kubieke meter aan
schaliegas. Wat jammer is aan schaliegas is dat het niet allemaal omhoog te halen is. Ongeveer 10
tot 15 procent van het schaliegas dat in de grond zit kan omhoog gehaald worden. Er wordt per jaar
99 miljard kubieke meter aan aardgas gebruikt in Engeland. Dit zou betekenen dat er 7,3 jaar kan
worden gedaan met het schaliegas dat gewonnen kan worden in Engeland. Het probleem is dat een
barrel of oil (dit staat gelijk aan 0,15899m^3) ongeveer 152 euro kost om te produceren. Vergeleken
met andere gasprijzen van bijvoorbeeld het gas uit de Noordzee voor ongeveer 91 euro per barrel in
april 2012 lijkt dit toch onvoordelig.
Noord Amerika heeft altijd vooraan gestaan bij het produceren van schaliegas. Door het grote
economische succes in Texas zijn er bronnen in andere delen van Amerika en ook in Canadagezocht. Later ging de hele wereld zoeken naar bronnen.
Ondanks al dit goede nieuws publiceerde de New York Times in juni 2011 een onderzoek waaruit
blijkt dat de geschatte winst misschien wel erg overschat is. Er zijn een hoop bedrijven die
opzettelijk hun schattingen over de reserves en de productiviteit van hun boren hebben overdreven.
Hierdoor leek het alsof ze veel meer winst gaan maken dan in de realiteit echt het geval is. Dit zijn
serieuze beschuldigingen maar er is echter nog geen strafrechtelijk onderzoek gedaan om de
bedrijven daadwerkelijk aan de klagen.
Er kan niet alleen winst worden gemaakt op het schaliegas maar daar de schaliegas productie
worden diepe ondergrondse oliebronnen opeens een stuk toegankelijker. Schalieolie zou ervoorkunnen zorgen dat de wereldeconomie 2,7 biljoen meer waard wordt. Dit wordt gezegd in een
rapport van PricewaterhouseCoopers. Er zou twaalf procent van de globale olieproductie in beslag
-
7/28/2019 schaliegas verslag
10/23
genomen kunnen worden door schalieolie.
We gaan weer terug naar Nederland waar de schaliegas reserves niet erg groot blijken te zijn. De
geschatte omvang is flink naar beneden bijgesteld en er wordt geschat dat de reserves in Nederlandvijf jaar extra gas opleveren. Naast dit gas zijn er ook een paar duizend extra banen tijdens die
periode van vijf jaar en kan met het gas 20 tot 30 miljard euro opleveren. Deze informatie komt uit
een manifest van hoogleraren tegen schaliegas. Ze vinden dat de economische winst niet opkan
tegen de ecologische schade. Als de ecologische schade in bedwang zou kunnen worden gehouden
zou het echter goed zijn voor de Nederlandse economie om schaliegas te boren.
HYDRAULISCH FRACCEN
According to the United States Environmental Protection Agency (EPA) hydraulic fracturing is aprocess to stimulate a natural gas, oil, or geothermal energy well to maximize the extraction. Thebroader process, however, is defined by EPA as including the acquisition of source water, wellconstruction, well stimulation, and waste disposal.[34]
Uses[edit source | editbeta]The technique of hydraulic fracturing is used to increase the rate at which fluids, such as
petroleum, water, or natural gas can be recovered from subterranean natural reservoirs.
Reservoirs are typically poroussandstones, limestones or dolomite rocks, but also include
"unconventional reservoirs" such asshale rock orcoal beds. Hydraulic fracturing enables the
production of natural gas and oil from rock formations deep below the earth's surface (generally
5,00020,000 feet (1,5006,100 m)), which is typically greatly below groundwater reservoirs ofbasins if present. At such depth, there may not be sufficientpermeability or reservoir pressure to
allow natural gas and oil to flow from the rock into the wellbore at economic rates. Thus, creating
conductive fractures in the rock is pivotal to extract gas from shale reservoirs because of the
extremely low natural permeability of shale, which is measured in the microdarcy to nanodarcy
range.[35]Fractures provide a conductive path connecting a larger volume of the reservoir to the
well. So-called "super fracing", which creates cracks deeper in the rock formation to release more
oil and gas, will increase efficiency of hydraulic fracturing.[36]The yield for a typical shale gas
well generally falls off after the first year or two, although the full producing life of a well can last
several decades.[37]
While the main industrial use of hydraulic fracturing is in arousing production from oil and gaswells,[38][39][40] hydraulic fracturing is also applied:
To stimulate groundwater wells[41]
To precondition or induce rock to cave in mining[42]
As a means of enhancing waste remediation processes, usually hydrocarbon waste or spills[43]
To dispose of waste by injection into deep rock formations[44]
As a method to measure the stress in the Earth[45]
For heat extraction to produce electricity in enhanced geothermal systems[46]
To increase injection rates for geologic sequestration of CO2[47]
Hydraulic fracturing of water-supply wells[edit source | editbeta]
Since the late 1970s, hydraulic fracturing has been used in some cases to increase the yield ofdrinking water from wells in a number of countries, including the US, Australia, and South Africa.
[48][49][50]
http://en.wikipedia.org/wiki/United_States_Environmental_Protection_Agencyhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-epa-ord-34http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=10http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=10http://en.wikipedia.org/wiki/Sandstonehttp://en.wikipedia.org/wiki/Limestonehttp://en.wikipedia.org/wiki/Dolomitehttp://en.wikipedia.org/wiki/Shalehttp://en.wikipedia.org/wiki/Shalehttp://en.wikipedia.org/wiki/Coalhttp://en.wikipedia.org/wiki/Coalhttp://en.wikipedia.org/wiki/Permeability_(earth_sciences)http://en.wikipedia.org/wiki/Darcyhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-2-35http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-2-35http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-BW_19.01.2012-36http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-BW_19.01.2012-36http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Geosoc_yield-37http://en.wikipedia.org/wiki/Oil_wellhttp://en.wikipedia.org/wiki/Oil_wellhttp://en.wikipedia.org/wiki/Oil_wellhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-3-38http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-4-39http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Economides-40http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-6-41http://en.wikipedia.org/wiki/Mininghttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-7-42http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-hazmat40.2-43http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Bell-44http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Aamodt-45http://en.wikipedia.org/wiki/Enhanced_geothermal_systemhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-8-46http://en.wikipedia.org/wiki/Carbon_capture_and_storage#Geological_storagehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Miller-47http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=11http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=11http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-48http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-49http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-50http://en.wikipedia.org/wiki/United_States_Environmental_Protection_Agencyhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-epa-ord-34http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=10http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=10http://en.wikipedia.org/wiki/Sandstonehttp://en.wikipedia.org/wiki/Limestonehttp://en.wikipedia.org/wiki/Dolomitehttp://en.wikipedia.org/wiki/Shalehttp://en.wikipedia.org/wiki/Coalhttp://en.wikipedia.org/wiki/Permeability_(earth_sciences)http://en.wikipedia.org/wiki/Darcyhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-2-35http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-BW_19.01.2012-36http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Geosoc_yield-37http://en.wikipedia.org/wiki/Oil_wellhttp://en.wikipedia.org/wiki/Oil_wellhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-3-38http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-4-39http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Economides-40http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-6-41http://en.wikipedia.org/wiki/Mininghttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-7-42http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-hazmat40.2-43http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Bell-44http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Aamodt-45http://en.wikipedia.org/wiki/Enhanced_geothermal_systemhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-8-46http://en.wikipedia.org/wiki/Carbon_capture_and_storage#Geological_storagehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Miller-47http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=11http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=11http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-48http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-49http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-50 -
7/28/2019 schaliegas verslag
11/23
Method[edit source | editbeta]A hydraulic fracture is formed by pumping the fracturing fluid into the wellbore at a rate sufficient
to increase pressure downhole at the target zone (determined by the location of the well casing
perforations) to exceed that of the fracture gradient (pressure gradient) of the rock.[51] The
fracture gradient is defined as the pressure increase per unit of the depth due to its density and it
is usually measured in pounds per square inch per foot or bars per meter. The rock cracks and the
fracture fluid continues further into the rock, extending the crack still further, and so on. Fractures
are localized because pressure drop off with frictional loss attributed to the distance from the
well. Operators typically try to maintain "fracture width", or slow its decline, following treatment
by introducing into the injected fluid aproppant a material such as grains of sand, ceramic, or
other particulates, that prevent the fractures from closing when the injection is stopped and the
pressure of the fluid is removed. Consideration of proppant strengths and prevention of proppant
failure becomes more important at greater depths where pressure and stresses on fractures are
higher. The propped fracture is permeable enough to allow the flow of formation fluids to the well.
Formation fluids include gas, oil, salt water and fluids introduced to the formation during
completion of the well during fracturing.[51]
During the process, fracturing fluid leakoff (loss of fracturing fluid from the fracture channel into
the surrounding permeable rock) occurs. If not controlled properly, it can exceed 70% of the
injected volume. This may result in formation matrix damage, adverse formation fluid
interactions, or altered fracture geometry and thereby decreased production efficiency.[52]
The location of one or more fractures along the length of the borehole is strictly controlled by
various methods that create or seal off holes in the side of the wellbore. Hydraulic fracturing is
performed in casedwellbores and the zones to be fractured are accessed by perforating the
casing at those locations.[53]
Hydraulic-fracturing equipment used in oil and natural gas fields usually consists of a slurry
blender, one or more high-pressure, high-volume fracturing pumps (typically powerful triplex or
quintuplex pumps) and a monitoring unit. Associated equipment includes fracturing tanks, one or
more units for storage and handling of proppant, high-pressure treating iron, a chemical additive
unit (used to accurately monitor chemical addition), low-pressure flexible hoses, and many
gauges and meters for flow rate, fluid density, and treating pressure.[54] Chemical additives are
typically 0.5% percent of the total fluid volume. Fracturing equipment operates over a range of
pressures and injection rates, and can reach up to 100 megapascals (15,000 psi) and 265 litres
per second (9.4 cu ft/s) (100 barrels per minute).[55]
Well types[edit source | editbeta]A distinction can be made between conventional or low-volume hydraulic fracturing used to
stimulate high-permeability reservoirs to frac a single well, and unconventional or high-volumehydraulic fracturing, used in the completion of tight gas and shale gas wells as unconventional
wells are deeper and require higher pressures than conventional vertical wells.[56] In addition to
hydraulic fracturing of vertical wells, it is also performed in horizontal wells. When done in already
highly permeable reservoirs such as sandstone-based wells, the technique is known as "well
stimulation".[40]
Horizontal drilling involves wellbores where the terminal drillhole is completed as a "lateral" that
extends parallel with the rock layer containing the substance to be extracted. For example,
laterals extend 1,500 to 5,000 feet (460 to 1,500 m) in the Barnett Shale basin in Texas, and up to
10,000 feet (3,000 m) in theBakken formation in North Dakota. In contrast, a vertical well only
accesses the thickness of the rock layer, typically 50300 feet (1591 m). Horizontal drilling alsoreduces surface disruptions as fewer wells are required to access a given volume of reservoir
rock. Drilling usually induces damage to the pore space at the wellbore wall, reducing the
http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=12http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=12http://en.wikipedia.org/wiki/Fracturing_fluidhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Proppanthttp://en.wikipedia.org/wiki/Proppanthttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Penny-52http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Penny-52http://en.wikipedia.org/wiki/Casing_(borehole)http://en.wikipedia.org/wiki/Perforation_(oil_well)http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Arthur-53http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Chilingar-54http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Love-55http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=13http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=13http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bmp-56http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Economides-40http://en.wikipedia.org/wiki/Horizontal_drillinghttp://en.wikipedia.org/wiki/Bakken_formationhttp://en.wikipedia.org/wiki/Bakken_formationhttp://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=12http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=12http://en.wikipedia.org/wiki/Fracturing_fluidhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Proppanthttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Penny-52http://en.wikipedia.org/wiki/Casing_(borehole)http://en.wikipedia.org/wiki/Perforation_(oil_well)http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Arthur-53http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Chilingar-54http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Love-55http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=13http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=13http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-bmp-56http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Economides-40http://en.wikipedia.org/wiki/Horizontal_drillinghttp://en.wikipedia.org/wiki/Bakken_formation -
7/28/2019 schaliegas verslag
12/23
permeability at and near the wellbore. This reduces flow into the borehole from the surrounding
rock formation, and partially seals off the borehole from the surrounding rock. Hydraulic fracturing
can be used to restore permeability,[57]but is not typically administered in this way.
Fracturing fluids[edit source | editbeta]
Water tanks preparing for a frac job
Main articles: Proppants and fracking fluids andList of additives for hydraulic fracturing
High-pressure fracture fluid is injected into the wellbore, with the pressure above the fracture
gradient of the rock. The two main purposes of fracturing fluid is to extend fractures, add
lubrication, change gel strength and to carry proppant into the formation, the purpose of which is
to stay there without damaging the formation or production of the well. Two methods of
transporting the proppant in the fluid are used high-rate and high-viscosity. High-viscosity
fracturing tends to cause large dominant fractures, while high-rate (slickwater) fracturing causes
small spread-out micro-fractures.[citation needed]
This fracture fluid contains water-soluble gelling agents (such as guar gum) which increase
viscosity and efficiently deliver the proppant into the formation.[58]
Process of mixing water with fracking fluids to be injected into the ground
The fluid injected into the rock is typically a slurry of water, proppants, andchemical additives.
[59] Additionally, gels, foams, and compressed gases, includingnitrogen,carbon dioxide and air
can be injected. Typically, of the fracturing fluid 90% is water and 9.5% is sand with the chemical
additives accounting to about 0.5%.[51][60][61] However, fracturing fluids have been developed
in which the use of water has been made unnecessary, using liquefied petroleum gas (LPG) and
propane.[62]
A proppant is a material that will keep an induced hydraulic fracture open, during or following a
fracturing treatment, and can be gel, foam, or slickwater-based. Fluids make tradeoffs in such
material properties asviscosity, where more viscous fluids can carry more concentrated
proppant; the energy or pressure demands to maintain a certain flux pump rate (flow velocity)
that will conduct the proppant appropriately; pH, various rheological factors, among others. Types
of proppant includesilica sand, resin-coated sand, and man-made ceramics. These vary
http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Renpu-57http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Renpu-57http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=14http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=14http://en.wikipedia.org/wiki/Proppants_and_fracking_fluidshttp://en.wikipedia.org/wiki/List_of_additives_for_hydraulic_fracturinghttp://en.wikipedia.org/wiki/List_of_additives_for_hydraulic_fracturinghttp://en.wikipedia.org/wiki/Proppants_and_fracking_fluidshttp://en.wikipedia.org/wiki/Viscosityhttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Slurryhttp://en.wikipedia.org/wiki/List_of_additives_for_hydraulic_fracturinghttp://en.wikipedia.org/wiki/List_of_additives_for_hydraulic_fracturinghttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-upenn-59http://en.wikipedia.org/wiki/Nitrogenhttp://en.wikipedia.org/wiki/Nitrogenhttp://en.wikipedia.org/wiki/Carbon_dioxidehttp://en.wikipedia.org/wiki/Carbon_dioxidehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Hartnett-60http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Liquefied_petroleum_gashttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-energyfuture-62http://en.wikipedia.org/wiki/Viscosityhttp://en.wikipedia.org/wiki/Viscosityhttp://en.wikipedia.org/wiki/Fluxhttp://en.wikipedia.org/wiki/Flow_velocityhttp://en.wikipedia.org/wiki/PHhttp://en.wikipedia.org/wiki/Rheologyhttp://en.wikipedia.org/wiki/Silica_sandhttp://en.wikipedia.org/wiki/File:Process_of_mixing_water_with_fracking_fluids_to_be_injected_into_the_ground.JPGhttp://en.wikipedia.org/wiki/File:Process_of_mixing_water_with_fracking_fluids_to_be_injected_into_the_ground.JPGhttp://en.wikipedia.org/wiki/File:Water_tanks_preparing_for_a_frac_job.JPGhttp://en.wikipedia.org/wiki/File:Water_tanks_preparing_for_a_frac_job.JPGhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Renpu-57http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=14http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=14http://en.wikipedia.org/wiki/Proppants_and_fracking_fluidshttp://en.wikipedia.org/wiki/List_of_additives_for_hydraulic_fracturinghttp://en.wikipedia.org/wiki/Proppants_and_fracking_fluidshttp://en.wikipedia.org/wiki/Viscosityhttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Slurryhttp://en.wikipedia.org/wiki/List_of_additives_for_hydraulic_fracturinghttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-upenn-59http://en.wikipedia.org/wiki/Nitrogenhttp://en.wikipedia.org/wiki/Carbon_dioxidehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Hartnett-60http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Liquefied_petroleum_gashttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-energyfuture-62http://en.wikipedia.org/wiki/Viscosityhttp://en.wikipedia.org/wiki/Fluxhttp://en.wikipedia.org/wiki/Flow_velocityhttp://en.wikipedia.org/wiki/PHhttp://en.wikipedia.org/wiki/Rheologyhttp://en.wikipedia.org/wiki/Silica_sand -
7/28/2019 schaliegas verslag
13/23
depending on the type of permeability or grain strength needed. The most commonly used
proppant is silica sand, though proppants of uniform size and shape, such as a ceramic proppant,
is believed to be more effective. Due to a higher porosity within the fracture, a greater amount of
oil and natural gas is liberated.[63]
The fracturing fluid varies in composition depending on the type of fracturing used, the conditions
of the specific well being fractured, and the water characteristics. A typical fracture treatment
uses between 3 and 12 additive chemicals.[51]Although there may be unconventional fracturing
fluids, the more typically used chemical additives can include one or more of the following:
Acidshydrochloric acid (usually 5%-28%), oracetic acid is used in the pre-fracturing stage for
cleaning the perforations and initiating fissure in the near-wellbore rock.[61]
Sodium chloride (salt)delays breakdown of the gelpolymer chains.[61]
Polyacrylamide and other friction reducersminimizes the friction between fluid and pipe, thus
allowing the pumps to pump at a higher rate without having greater pressure on the surface.[61]
Ethylene glycolprevents formation ofscale deposits in the pipe.[61]
Borate saltsused for maintaining fluid viscosity during the temperature increase.[61]
Sodium and potassium carbonatesused for maintaining effectiveness ofcrosslinkers.[61]
Glutaraldehydeused as disinfectantof the water (bacteria elimination).[61]
Guar gum and other water-soluble gelling agentsincreases viscosity of the fracturing fluid to
deliver more efficiently the proppant into the formation.[58][61]
Citric acidused forcorrosion prevention.
Isopropanolincreases the viscosity of the fracture fluid.[61]
The most common chemical used for hydraulic fracturing in the United States in 20052009
was methanol, while some other most widely used chemicals were isopropyl alcohol, 2-
butoxyethanol, andethylene glycol.[64]
Typical fluid types are:
Conventional linear gels. These gels are cellulose derivatives (carboxymethyl
cellulose,hydroxyethyl cellulose, carboxymethyl hydroxyethyl cellulose, hydroxypropyl
cellulose,methyl hydroxyl ethyl cellulose), guaror its derivatives (hydroxypropyl
guar, carboxymethyl hydroxypropyl guar) based, with other chemicals providing the necessary
chemistry for the desired results.
Borate-crosslinked fluids. These are guar-based fluids cross-linked with boronions (from
aqueous borax/boric acid solution). These gels have higher viscosity at pH 9 onwards and are
used to carry proppants. After the fracturing job the pH is reduced to 34 so that the cross-links
are broken and the gel is less viscous and can be pumped out.
Organometallic-crosslinked fluids zirconium, chromium, antimony,titaniumsalts are known to
crosslink the guar based gels. The crosslinking mechanism is not reversible. So once the proppantis pumped down along with the cross-linked gel, the fracturing part is done. The gels are broken
down with appropriate breakers.[58]
Aluminium phosphate-ester oil gels. Aluminium phosphateand ester oils are slurried to form
cross-linked gel. These are one of the first known gelling systems.
For slickwater it is common to include sweeps or a reduction in the proppant concentration
temporarily to ensure the well is not overwhelmed with proppant causing a screen-off.[65] As the
fracturing process proceeds, viscosity reducing agents such asoxidizers and enzyme breakers are
sometimes then added to the fracturing fluid to deactivate the gelling agents and encourage
flowback.[58] The oxidizer reacts with the gel to break it down, reducing the fluid's viscosity and
ensuring that no proppant is pulled from the formation. An enzyme acts as a catalyst for thebreaking down of the gel. SometimespH modifiersare used to break down the crosslink at the end
of a hydraulic fracturing job, since many require a pH buffer system to stay viscous.[65] At the
http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-12-63http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-12-63http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Acidhttp://en.wikipedia.org/wiki/Hydrochloric_acidhttp://en.wikipedia.org/wiki/Acetic_acidhttp://en.wikipedia.org/wiki/Acetic_acidhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Sodium_chloridehttp://en.wikipedia.org/wiki/Polymer_chainhttp://en.wikipedia.org/wiki/Polymer_chainhttp://en.wikipedia.org/wiki/Polymer_chainhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Polyacrylamidehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Ethylene_glycolhttp://en.wikipedia.org/wiki/Foulinghttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Borate_saltshttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Sodium_carbonatehttp://en.wikipedia.org/wiki/Potassium_carbonatehttp://en.wikipedia.org/wiki/Cross-linkhttp://en.wikipedia.org/wiki/Cross-linkhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Glutaraldehydehttp://en.wikipedia.org/wiki/Disinfectanthttp://en.wikipedia.org/wiki/Disinfectanthttp://en.wikipedia.org/wiki/Bacteriahttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Guar_gumhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Citric_acidhttp://en.wikipedia.org/wiki/Corrosionhttp://en.wikipedia.org/wiki/Corrosionhttp://en.wikipedia.org/wiki/Isopropanolhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Methanolhttp://en.wikipedia.org/wiki/Methanolhttp://en.wikipedia.org/wiki/Isopropyl_alcoholhttp://en.wikipedia.org/wiki/2-butoxyethanolhttp://en.wikipedia.org/wiki/2-butoxyethanolhttp://en.wikipedia.org/wiki/Ethylene_glycolhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-house1-64http://en.wikipedia.org/wiki/Carboxymethyl_cellulosehttp://en.wikipedia.org/wiki/Carboxymethyl_cellulosehttp://en.wikipedia.org/wiki/Hydroxyethyl_cellulosehttp://en.wikipedia.org/wiki/Hydroxyethyl_cellulosehttp://en.wikipedia.org/w/index.php?title=Carboxymethyl_hydroxyethyl_cellulose&action=edit&redlink=1http://en.wikipedia.org/wiki/Hydroxypropyl_cellulosehttp://en.wikipedia.org/wiki/Hydroxypropyl_cellulosehttp://en.wikipedia.org/w/index.php?title=Methyl_hydroxyl_ethyl_cellulose&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Methyl_hydroxyl_ethyl_cellulose&action=edit&redlink=1http://en.wikipedia.org/wiki/Guarhttp://en.wikipedia.org/wiki/Guarhttp://en.wikipedia.org/w/index.php?title=Hydroxypropyl_guar&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Hydroxypropyl_guar&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Carboxymethyl_hydroxypropyl_guar&action=edit&redlink=1http://en.wikipedia.org/wiki/Boronhttp://en.wikipedia.org/wiki/Boronhttp://en.wikipedia.org/wiki/Boraxhttp://en.wikipedia.org/wiki/Boric_acidhttp://en.wikipedia.org/wiki/Boric_acidhttp://en.wikipedia.org/wiki/Zirconiumhttp://en.wikipedia.org/wiki/Chromiumhttp://en.wikipedia.org/wiki/Antimonyhttp://en.wikipedia.org/wiki/Antimonyhttp://en.wikipedia.org/wiki/Titaniumhttp://en.wikipedia.org/wiki/Titaniumhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Aluminium_phosphatehttp://en.wikipedia.org/wiki/Aluminium_phosphatehttp://en.wikipedia.org/wiki/Esterhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Canada-65http://en.wikipedia.org/wiki/Oxidizerhttp://en.wikipedia.org/wiki/Oxidizerhttp://en.wikipedia.org/wiki/Enzymehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Froth_flotation#Modifiershttp://en.wikipedia.org/wiki/Froth_flotation#Modifiershttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Canada-65http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Canada-65http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-12-63http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Acidhttp://en.wikipedia.org/wiki/Hydrochloric_acidhttp://en.wikipedia.org/wiki/Acetic_acidhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Sodium_chloridehttp://en.wikipedia.org/wiki/Polymer_chainhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Polyacrylamidehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Ethylene_glycolhttp://en.wikipedia.org/wiki/Foulinghttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Borate_saltshttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Sodium_carbonatehttp://en.wikipedia.org/wiki/Potassium_carbonatehttp://en.wikipedia.org/wiki/Cross-linkhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Glutaraldehydehttp://en.wikipedia.org/wiki/Disinfectanthttp://en.wikipedia.org/wiki/Bacteriahttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Guar_gumhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Citric_acidhttp://en.wikipedia.org/wiki/Corrosionhttp://en.wikipedia.org/wiki/Isopropanolhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-freeing-61http://en.wikipedia.org/wiki/Methanolhttp://en.wikipedia.org/wiki/Isopropyl_alcoholhttp://en.wikipedia.org/wiki/2-butoxyethanolhttp://en.wikipedia.org/wiki/2-butoxyethanolhttp://en.wikipedia.org/wiki/Ethylene_glycolhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-house1-64http://en.wikipedia.org/wiki/Carboxymethyl_cellulosehttp://en.wikipedia.org/wiki/Carboxymethyl_cellulosehttp://en.wikipedia.org/wiki/Hydroxyethyl_cellulosehttp://en.wikipedia.org/w/index.php?title=Carboxymethyl_hydroxyethyl_cellulose&action=edit&redlink=1http://en.wikipedia.org/wiki/Hydroxypropyl_cellulosehttp://en.wikipedia.org/wiki/Hydroxypropyl_cellulosehttp://en.wikipedia.org/w/index.php?title=Methyl_hydroxyl_ethyl_cellulose&action=edit&redlink=1http://en.wikipedia.org/wiki/Guarhttp://en.wikipedia.org/w/index.php?title=Hydroxypropyl_guar&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Hydroxypropyl_guar&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Carboxymethyl_hydroxypropyl_guar&action=edit&redlink=1http://en.wikipedia.org/wiki/Boronhttp://en.wikipedia.org/wiki/Boraxhttp://en.wikipedia.org/wiki/Boric_acidhttp://en.wikipedia.org/wiki/Zirconiumhttp://en.wikipedia.org/wiki/Chromiumhttp://en.wikipedia.org/wiki/Antimonyhttp://en.wikipedia.org/wiki/Titaniumhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Aluminium_phosphatehttp://en.wikipedia.org/wiki/Esterhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Canada-65http://en.wikipedia.org/wiki/Oxidizerhttp://en.wikipedia.org/wiki/Enzymehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-CRO_2009-58http://en.wikipedia.org/wiki/Froth_flotation#Modifiershttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Canada-65 -
7/28/2019 schaliegas verslag
14/23
end of the job the well is commonly flushed with water (sometimes blended with a friction
reducing chemical) under pressure. Injected fluid is to some degree recovered and is managed by
several methods, such as underground injection control, treatment and discharge, recycling, or
temporary storage in pits or containers while new technology is continually being developed and
improved to better handle waste water and improve re-usability.[51]
Fracture monitoring[edit source | editbeta]Measurements of the pressure and rate during the growth of a hydraulic fracture, as well asknowing the properties of the fluid and proppant being injected into the well provides the most
common and simplest method of monitoring a hydraulic fracture treatment. This data, along with
knowledge of the underground geology can be used to model information such as length, width
and conductivity of a propped fracture.[51]
Injection ofradioactive tracers, along with the other substances in hydraulic-fracturing fluid, is
sometimes used to determine the injection profile and location of fractures created by hydraulic
fracturing.[66] Theradiotracer is chosen to have the readily detectable radiation, appropriate
chemical properties, and a half life and toxicity level that will minimize initial and residual
contamination.[67]Radioactive isotopes chemically bonded to glass (sand) and/or resin beads
may also be injected to track fractures.[68] For example, plastic pellets coated with 10 GBq of Ag-
110mm may be added to the proppant or sand may be labelled with Ir-192 so that the proppant's
progress can be monitored.[67] Radiotracers such as Tc-99m and I-131 are also used to measure
flow rates.[67] The Nuclear Regulatory Commission publishes guidelines which list a wide range
of radioactive materials in solid, liquid and gaseous forms that may be used as tracers and limit
the amount that may be used per injection and per well of each radionuclide.[68]
Microseismic monitoring[edit source | editbeta]
For more advanced applications, microseismic monitoring is sometimes used to estimate the size
and orientation of hydraulically induced fractures. Microseismic activity is measured by placing an
array ofgeophones in a nearby wellbore. By mapping the location of any small seismic events
associated with the growing hydraulic fracture, the approximate geometry of the fracture is
inferred.Tiltmeterarrays, deployed on the surface or down a well, provide another technology for
monitoring the strains produced by hydraulic fracturing.[69]
Microseismic mapping is very similar geophysically toseismology. In earthquake seismology
seismometers scattered on or near the surface of the earth recordS-waves andP-waves that are
released during an earthquake event. This allows for the motion along the fault plane to be
estimated and its location in the earths subsurface mapped. During formation stimulation by
hydraulic fracturing an increase in the formation stress proportional to the net fracturing pressure
as well as an increase in pore pressure due to leakoff takes place.[70]Tensile stresses are
generated ahead of the fracture/cracks tip which generates large amounts ofshear stress. The
increase in pore water pressure and formation stress combine and affect the weakness (natural
fractures, joints, and bedding planes) near the hydraulic fracture. Dilatational and compressive
reactions occur and emit seismic energy detectable by highly sensitive geophones placed in
nearby wells or on the surface.[71]
Different methods have different location errors and advantages. Accuracy of microseismic event
locations is dependent on the signal to noise ratio and the distribution of the receiving sensors.
For a surface array location accuracy of events located byseismic inversion is improved by
sensors placed in multiple azimuths from the monitored borehole. In a downhole array location
accuracy of events is improved by being close to the monitored borehole (high signal to noise
ratio).
Monitoring of microseismic events induced by reservoir stimulation has become a key aspect in
evaluation of hydraulic fractures and their optimization. The main goal of hydraulic fracture
http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=15http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=15http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Radioactive_tracerhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Reis_iodine-66http://en.wikipedia.org/wiki/Radioactive_tracerhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-IAEA_2003-67http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-IAEA_2003-67http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-NRC-68http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-IAEA_2003-67http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-IAEA_2003-67http://en.wikipedia.org/wiki/Nuclear_Regulatory_Commissionhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-NRC-68http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=16http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=16http://en.wikipedia.org/wiki/Microseismichttp://en.wikipedia.org/wiki/Geophonehttp://en.wikipedia.org/wiki/Tiltmeterhttp://en.wikipedia.org/wiki/Tiltmeterhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Oilfield_Review_2005.2F2006-69http://en.wikipedia.org/wiki/Seismologyhttp://en.wikipedia.org/wiki/Seismologyhttp://en.wikipedia.org/wiki/S-waveshttp://en.wikipedia.org/wiki/S-waveshttp://en.wikipedia.org/wiki/P-waveshttp://en.wikipedia.org/wiki/P-waveshttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Fehler_1989-70http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Fehler_1989-70http://en.wikipedia.org/wiki/Shear_stresshttp://en.wikipedia.org/wiki/Shear_stresshttp://en.wikipedia.org/wiki/Pore_water_pressurehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Le_Calvez_2007-71http://en.wikipedia.org/wiki/Seismic_inversionhttp://en.wikipedia.org/wiki/Seismic_inversionhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=15http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=15http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-DOE_primer-51http://en.wikipedia.org/wiki/Radioactive_tracerhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Reis_iodine-66http://en.wikipedia.org/wiki/Radioactive_tracerhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-IAEA_2003-67http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-NRC-68http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-IAEA_2003-67http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-IAEA_2003-67http://en.wikipedia.org/wiki/Nuclear_Regulatory_Commissionhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-NRC-68http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=16http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=16http://en.wikipedia.org/wiki/Microseismichttp://en.wikipedia.org/wiki/Geophonehttp://en.wikipedia.org/wiki/Tiltmeterhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Oilfield_Review_2005.2F2006-69http://en.wikipedia.org/wiki/Seismologyhttp://en.wikipedia.org/wiki/S-waveshttp://en.wikipedia.org/wiki/P-waveshttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Fehler_1989-70http://en.wikipedia.org/wiki/Shear_stresshttp://en.wikipedia.org/wiki/Pore_water_pressurehttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Le_Calvez_2007-71http://en.wikipedia.org/wiki/Seismic_inversion -
7/28/2019 schaliegas verslag
15/23
monitoring is to completely characterize the induced fracture structure and distribution of
conductivity within a formation. This is done by first understanding the fracture structure.
Geomechanical analysis, such as understanding the material properties, in-situ conditions and
geometries involved will help with this by providing a better definition of the environment in
which the hydraulic fracture network propagates.[72]The next task is to know the location of
proppant within the induced fracture and the distribution of fracture conductivity. This can be
done using multiple types of techniques and finally, further develop a reservoir model than can
accurately predict well performance.
Horizontal completions[edit source | editbeta]Since the early 2000s, advances indrilling andcompletion technology have made drilling
horizontal wellbores much more economical. Horizontal wellbores allow for far greater exposure
to a formation than a conventional vertical wellbore. This is particularly useful in shale formations
which do not have sufficient permeability to produce economically with a vertical well. Such wells
when drilled onshore are now usually hydraulically fractured in a number of stages, especially in
North America. The type of wellbore completion used will affect how many times the formation is
fractured, and at what locations along the horizontal section of the wellbore.[73]
In North America, shale reservoirs such as the Bakken, Barnett, Monterey, Haynesville,Marcellus,
and most recently theEagle Ford, Niobraraand Utica shales are drilled, completed and fractured
using this method.[citation needed] The method by which the fractures are placed along the
wellbore is most commonly achieved by one of two methods, known as "plug and perf" and
"sliding sleeve".[74]
The wellbore for a plug and perf job is generally composed of standard joints of steel casing,
either cemented or uncemented, which is set in place at the conclusion of the drilling process.
Once the drilling rig has been removed, a wireline truckis used toperforate near the end of the
well, following which a fracturing job is pumped (commonly called a stage). Once the stage is
finished, the wireline truck will set a plug in the well to temporarily seal off that section, and then
perforate the next section of the wellbore. Another stage is then pumped, and the process is
repeated as necessary along the entire length of the horizontal part of the wellbore.[75]
The wellbore for the sliding sleeve technique is different in that the sliding sleeves are included at
set spacings in the steel casing at the time it is set in place. The sliding sleeves are usually all
closed at this time. When the well is ready to be fractured, using one of several activation
techniques, the bottom sliding sleeve is opened and the first stage gets pumped. Once finished,
the next sleeve is opened which concurrently isolates the first stage, and the process repeats. For
the sliding sleeve method, wireline is usually not required.[citation needed]
Sleeves
These completion techniques may allow for more than 30 stages to be pumped into the horizontal
section of a single well if required, which is far more than would typically be pumped into a
vertical well.[76]
GEOLOGIE
Because shales ordinarily have insufficient permeability to allow significant fluid flow to a wellbore, most shales are not commercial sources of natural gas. Shale gas is one of a number of
http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Cipolla_2010-72http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Cipolla_2010-72http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=17http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=17http://en.wikipedia.org/wiki/Oil_well#Drillinghttp://en.wikipedia.org/wiki/Oil_well#Drillinghttp://en.wikipedia.org/wiki/Completion_(oil_and_gas_wells)http://en.wikipedia.org/wiki/Completion_(oil_and_gas_wells)http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-13-73http://en.wikipedia.org/wiki/Montney_Formationhttp://en.wikipedia.org/wiki/Haynesville_Shalehttp://en.wikipedia.org/wiki/Marcellus_Formationhttp://en.wikipedia.org/wiki/Marcellus_Formationhttp://en.wikipedia.org/wiki/Eagle_Ford_Formationhttp://en.wikipedia.org/wiki/Eagle_Ford_Formationhttp://en.wikipedia.org/wiki/Niobrara_Formationhttp://en.wikipedia.org/wiki/Niobrara_Formationhttp://en.wikipedia.org/wiki/Utica_Shalehttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-undeerc-74http://en.wikipedia.org/wiki/Wireline_(cabling)http://en.wikipedia.org/wiki/Wireline_(cabling)http://en.wikipedia.org/wiki/Perforation_(oil_well)http://en.wikipedia.org/wiki/Perforation_(oil_well)http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-14-75http://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-mooney-76http://en.wikipedia.org/wiki/Permeability_(fluid)http://en.wikipedia.org/wiki/File:Sleeves.JPGhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Cipolla_2010-72http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=17http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=17http://en.wikipedia.org/wiki/Oil_well#Drillinghttp://en.wikipedia.org/wiki/Completion_(oil_and_gas_wells)http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-13-73http://en.wikipedia.org/wiki/Montney_Formationhttp://en.wikipedia.org/wiki/Haynesville_Shalehttp://en.wikipedia.org/wiki/Marcellus_Formationhttp://en.wikipedia.org/wiki/Eagle_Ford_Formationhttp://en.wikipedia.org/wiki/Niobrara_Formationhttp://en.wikipedia.org/wiki/Utica_Shalehttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-undeerc-74http://en.wikipedia.org/wiki/Wireline_(cabling)http://en.wikipedia.org/wiki/Perforation_(oil_well)http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-AutoZV-14-75http://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-mooney-76http://en.wikipedia.org/wiki/Permeability_(fluid) -
7/28/2019 schaliegas verslag
16/23
unconventional sources of natural gas; others includecoalbed methane,tight sandstones,and methane hydrates. Shale gas areas are often known as resource plays[20] (as opposedto exploration plays). The geological risk of not finding gas is low in resource plays, but thepotential profits per successful well are usually also lower.[citation needed]
Shale has low matrix permeability, so gas production in commercial quantities requires fractures
to provide permeability. Shale gas has been produced for years from shales with natural fractures;
the shale gas boom in recent years has been due to modern technology in hydraulicfracturing (fracking) to create extensive artificial fractures around well bores.[citation needed]
Horizontal drilling is often used with shale gas wells, with lateral lengths up to 10,000 feet
(3,000 m) within the shale, to create maximum borehole surface area in contact with the shale.
[citation needed]
Shales that host economic quantities of gas have a number of common properties. They are rich
in organic material (0.5% to 25%),[21] and are usually mature petroleum source rocks in the
thermogenic gas window, where high heat and pressure have converted petroleum to natural gas.
They are sufficiently brittle and rigid enough to maintain open fractures.
Some of the gas produced is held in natural fractures, some in pore spaces, and some
isadsorbedonto the organic material. The gas in the fractures is produced immediately; the gas
adsorbed onto organic material is released as the formation pressure is drawn down by the well.
[citation needed]
Mechanics[edit source | editbeta]
Fracturing in rocks at depth tends to be suppressed by the confining pressure, due to the load
caused by the overlying rock strata and the cementation of the formation. This is particularly so
in the case of "tensile" (Mode 1) fractures, which require the walls of the fracture to move apart,working against this confining pressure. Hydraulic fracturing occurs when the effective stressis
overcome sufficiently by an increase in the pressure of fluids within the rock, such that the
minimum principal stress becomes tensile and exceeds the tensile strength of the material.[12]
[13] Fractures formed in this way will in the main be oriented in the plane perpendicular to the
minimum principal stress and for this reason induced hydraulic fractures in well bores are
sometimes used to determine the orientation of stresses.[14] In natural examples, such as dikes
or vein-filled fractures, the orientations can be used to infer past states of stress.[15]
Veins[edit source | editbeta]Most vein systems are a result of repeated hydraulic fracturing during periods of relatively high
pore fluid pressure. This is particularly noticeable in the case of "crack-seal" veins, where the veinmaterial can be seen to have been added in a series of discrete fracturing events, with extra vein
material deposited on each occasion.[16] One mechanism to demonstrate such examples of long-
lasting repeated fracturing is the effect of seismic activity, in which the stress levels rise and fall
episodically and large volumes of connate water may be expelled from fluid-filled fractures during
earthquakes. This process is referred to as "seismic pumping".[17]
Dikes[edit source | editbeta]Low-level minor intrusions such as dikes propagate through the crust in the form of fluid-filled
cracks, although in this case the fluid is magma. In sedimentary rocks with a significant water
content the fluid at the propagating fracture tip will be steam.[18]
Non-hydraulic fracturing[edit source | editbeta]Fracturing as a method to stimulate shallow, hard rock oil wells dates back to the 1860s. It was
applied by oil producers in the US states ofPennsylvania, New York, Kentucky, and West
http://en.wikipedia.org/wiki/Coalbed_methanehttp://en.wikipedia.org/wiki/Coalbed_methanehttp://en.wikipedia.org/wiki/Tight_gashttp://en.wikipedia.org/wiki/Tight_gashttp://en.wikipedia.org/wiki/Methane_hydrateshttp://en.wikipedia.org/wiki/Shale_gas#cite_note-20http://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Shalehttp://en.wikipedia.org/wiki/Matrix_(geology)http://en.wikipedia.org/wiki/Hydraulic_fracturinghttp://en.wikipedia.org/wiki/Hydraulic_fracturinghttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Horizontal_drillinghttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Shale_gas#cite_note-21http://en.wikipedia.org/wiki/Source_rockhttp://en.wikipedia.org/wiki/Adsorbhttp://en.wikipedia.org/wiki/Adsorbhttp://en.wikipedia.org/wiki/Adsorbhttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=2http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=2http://en.wikipedia.org/wiki/Pressure#Liquid_pressure_or_pressure_at_depthhttp://en.wikipedia.org/wiki/Pressure#Liquid_pressure_or_pressure_at_depthhttp://en.wikipedia.org/wiki/Fracture#Crack_separation_modeshttp://en.wikipedia.org/wiki/Effective_stresshttp://en.wikipedia.org/wiki/Effective_stresshttp://en.wikipedia.org/wiki/Principal_stresshttp://en.wikipedia.org/wiki/Tensile_strengthhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Fjaer-12http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Price-13http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Manthei-14http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Zoback-15http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=3http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=3http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Laubach-16http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Sibson-17http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=4http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=4http://en.wikipedia.org/wiki/Magmahttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Gill-18http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=5http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=5http://en.wikipedia.org/wiki/Pennsylvaniahttp://en.wikipedia.org/wiki/New_Yorkhttp://en.wikipedia.org/wiki/Kentuckyhttp://en.wikipedia.org/wiki/West_Virginiahttp://en.wikipedia.org/wiki/Coalbed_methanehttp://en.wikipedia.org/wiki/Tight_gashttp://en.wikipedia.org/wiki/Methane_hydrateshttp://en.wikipedia.org/wiki/Shale_gas#cite_note-20http://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Shalehttp://en.wikipedia.org/wiki/Matrix_(geology)http://en.wikipedia.org/wiki/Hydraulic_fracturinghttp://en.wikipedia.org/wiki/Hydraulic_fracturinghttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Horizontal_drillinghttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/wiki/Shale_gas#cite_note-21http://en.wikipedia.org/wiki/Source_rockhttp://en.wikipedia.org/wiki/Adsorbhttp://en.wikipedia.org/wiki/Wikipedia:Citation_neededhttp://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=2http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=2http://en.wikipedia.org/wiki/Pressure#Liquid_pressure_or_pressure_at_depthhttp://en.wikipedia.org/wiki/Fracture#Crack_separation_modeshttp://en.wikipedia.org/wiki/Effective_stresshttp://en.wikipedia.org/wiki/Principal_stresshttp://en.wikipedia.org/wiki/Tensile_strengthhttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Fjaer-12http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Price-13http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Manthei-14http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Zoback-15http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=3http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=3http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Laubach-16http://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Sibson-17http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=4http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=4http://en.wikipedia.org/wiki/Magmahttp://en.wikipedia.org/wiki/Hydraulic_fracturing#cite_note-Gill-18http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&action=edit§ion=5http://en.wikipedia.org/w/index.php?title=Hydraulic_fracturing&veaction=edit§ion=5http://en.wikipedia.org/wiki/Pennsylvaniahttp://en.wikipedia.org/wiki/New_Yorkhttp://en.wikipedia.org/wiki/Kentuckyhttp://en.wikipedi
top related