sensors and transducers accelerometers pressure sensors differential pressure switches sound...
Post on 16-Jan-2016
239 Views
Preview:
TRANSCRIPT
SENSORS AND TRANSDUCERSSENSORS AND TRANSDUCERS
AccelerometersAccelerometers
Pressure sensorsPressure sensors
Differential pressure switchesDifferential pressure switches
Sound pressure sensorsSound pressure sensors
Rotation sensorsRotation sensors
Rotation velocity sensorsRotation velocity sensors
Displacement sensorsDisplacement sensors
Temperature sensorsTemperature sensors
Heat flow sensorsHeat flow sensors
TransducersTransducers
LLC “SENSOR ENTERPRISE “ZAVOD RAPID”
Chernigov, Ukraine
Temperature measuring sensors
SENSORS AND TRANSDUCERS
ТМ 006
It is assigned for measuring of temperature of a flat surface
Copper resistance thermometer with cable-end splitting in a plastic case
Calibrating characteristics in the working temperature range
SPECIFICATION
from -196оС till +200оС
VALUE
Characteristic accuracy ± 0,5оС
Service life at the temperature range from –196оС till +100оС 33 000 hours
Storage warranty period 20 years
Thermal inertia index less than 0,01 sec
Thermometer resistance at 0оС 17, 23, 30, 53, 60, 100 Ohms
Mass less than 8 g
Space industry
ТМ 006А
Calibrating characteristics in the working temperature range
SPECIFICATION
from -196оС till +200оС
VALUE
Characteristic accuracy ± 0,5оС
Service life at the temperature range from –196оС till +100оС 33 000 hours
Storage warranty period 15 years
Thermal inertia index less than 0,01 s
Thermometer resistance at 0оС 17, 23, 30, 53, 60, 100 Ohms
Mass less than 2,5 g
SENSORS AND TRANSDUCERS
Copper resistance thermometer in a plastic case
It is assigned for measuring of temperature of a flat surface
Temperature measuring sensors
Space industry
ТМ 104
It is assigned for measuring of temperature of surfaces with curvature radius 7..100 mm
Copper resistance thermometer with cable-end splitting in a plastic case
Calibrating characteristics in the working temperature range
SPECIFICATION
from -196оС till +200оС
VALUE
Characteristic accuracy ± 0,5оС
Service life at the temperature range from –196оС till +100оС 33 000 hours
Storage warranty period 20 years
Thermal inertia index less than 0,01 s
Thermometer resistance at 0оС 17, 23, 30, 53, 60, 100 Ohms
Mass not more than 8 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 104А
Copper resistance thermometer in a plastic case
from -196оС till +200оС
VALUE
± 0,5оС
33 000 hours
15 years
less than 0,01 s
17, 23, 30, 53, 60, 100 Ohms
not more than 4,5 g
It is assigned for measuring of temperature of surfaces with the curvature radius 7..100 mm
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Calibrating characteristics in the working temperature range
SPECIFICATION
Characteristic accuracy
Service life at the temperature range from –196оС till +100оС
Storage warranty period
Thermal inertia index
Thermometer resistance at 0оС
Mass
Space industry
ТЭМ 000
Sensing element
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
from -196оС till +200оС
VALUE
Characteristic accuracy ± 0,5оС
Service life at the temperature range : from -196оС till +100оС from -10оС till +100оС
33 000 hours
20 years
Thermal inertia index less than 0,01 s
17, 23, 30, 53, 60, 100 Ohms
0,5 g
55 000 hours
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Storage warranty period
Thermometer resistance at 0оС
Mass
Space industry
ТЭМ 006
Sensing element
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
from -196оС till +200оС
VALUE
Characteristic accuracy ± 0,5оС
Service life at the temperature range: from -196оС till +100оС
from -10оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermal inertia index less than 0,01 s
Thermometer resistance at 0оС 17, 23, 30, 53, 60, 100 Ohms
Mass 0,5 g
55 000 hours
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТЭП 012
Platinum resistance thermometer without current terminal splitting (sensing element).
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
from -260оС till +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0С 15,25,34,46,60,100 Ohms
Mass nor more than 0,5 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТЭП 018
Platinum resistance thermometer without current terminal splitting (sensing element).
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
from -260оС till +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0С 15,25,34,46,60,100,500 Ohms
Mass not more than 0,5 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТЭП 018А
Platinum resistance thermometer without current terminal splitting (sensing element).
It is assigned for measuring of temperature of surfaces with the curvature radius 7…100 mm
Calibrating characteristics in the working temperature range
SPECIFICATION
from -260оС till +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0 С 15,25,34,46,60,100,500 Ohms
Mass not more than 0,5 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 018
Platinum resistance thermometer
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
от -260оС до +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0 С 15,25,34,46,60,100,500 Ohms
Mass not more than 8 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 018А
Platinum resistance thermometer
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
от -260оС до +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0 С 15,25,34,46,60,100,500 Ohms
Mass not more than 8 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 110
Platinum resistance thermometer
It is assigned for measuring of temperature of surfaces with the curvature radius 7…100 mm
Calibrating characteristics in the working temperature range
SPECIFICATION
от -260оС до +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0 С 15,25,34,46,60,100 Ohms
Mass not more than 8 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 110А
Platinum resistance thermometer
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
от -260оС до +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0 С 15,25,34,46,60,100 Ohms
Mass not more than 8 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 025
Platinum resistance thermometer
It is assigned for measuring of temperature of surfaces
Calibrating characteristics in the working temperature range
SPECIFICATION
от -260оС до +300оС
VALUE
Characteristic accuracy ± 0,5оС
Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС
33 000 hours
Storage warranty period 20 years
Thermometer resistance at 0 С 34 Ohms
Mass not more than 0,5 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 166
It is assigned for measuring of temperature of the undisturbed non-aggressive nonconductive liquids and gases
Temperature measuring range, at pressure value 200 kg/m2
SPECIFICATION
from 77,15 till 473,15 К
VALUE
Thermal inertia index at the air velocity value 5 ± 0,5 м/с not more than 5±1 s
Storage warranty period 15 years
Thermometer resistance at 0 С 23, 30, 53, 60, 100 Ohms
Mass not more than 0,08 kg
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 168
It is assigned for measuring of temperature of the undisturbed non-aggressive nonconductive liquids and gases
It is non-hermetic
Temperature measuring range
SPECIFICATION
от 77,15 до 473,15 К
VALUE
Thermal inertia index at the air velocity value 5 ± 0,5 m/s not more than 5±1 s
Storage warranty period 20 years
Thermometer resistance at 0 С 23, 30, 53, 60, 100 Ohms
Mass not more than 0,02 kg
Total operating time, when it operates within temperature range from 123,15 till 373,15 К.
13 000 hours
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 168А
It is assigned for measuring of temperature of non-aggressive gases within compartment volumes.
The sensor is non-hermetic
The sensor’s end connection is 2РМ Г14Б4 Ш1Е2Б (male)
Temperature measuring range
SPECIFICATION
from 77,15 till 473,15 К
VALUE
Thermal inertia index at the air rate 5 ± 0,5 м/с not more than 5±1 s
Storage warranty period 15 years
Thermometer resistance at 0 С 273,15 Ohms; 92 Ohms
Mass not more than 0,06 kg
Total operating time, when it operates within temperature range from 123,15 till 373,15 К
120 000 hours
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 119
It is assigned for measuring of temperature of aggressive liquids and gases.
There are 14 modifications of the thermometer, differing by the lengths of its submersible part - from 30 mm till 56 mm, and electrical resistance value – from 23 till 100 Ohms
Temperature measuring range, at maximal pressure 600 kg/sm2
SPECIFICATION
от -196 до +200о С
VALUE
Thermal inertia index in the boiling water not more than 4 s
Storage warranty period 20 years
Thermometer resistance at 0 С from 23 till 100 Ohms
Mass not more than 0,06 kg
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 221
Copper resistance thermometer
It is assigned for measuring of temperature of surfaces (including the surfaces that undergo the direct sun radiation)
Temperature measuring range
SPECIFICATION
от -50 до +200 оС
VALUE
Calibration characteristic accuracy ± 0,5 ˚С
Storage warranty period 12 years
Thermometer resistance at 0 С 50, 100, 200 Ohms
Mass not more than 1 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 222
It is assigned for measuring of temperature of a neutral gaseous mixtures
Temperature measuring range
SPECIFICATION
от 0 до +50о С
VALUE
Calibration characteristic accuracy ± 0,5 ˚С
Storage warranty period 12 years
Thermometer resistance at 0 С 100, 200 Ohms
Mass not more than 1,5 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТМ 232
Resistance thermometer with cable-end splitting in a plastic case
It is assigned for measuring of temperature of: flat surfaces; pipeline surfaces, diameter 14 mm and more; spherical surfaces, diameter 20 mm and more
Temperature measuring range
SPECIFICATION
от -130 до +200о С
VALUE
Calibration characteristic accuracy not more than 1,5˚С
Storage warranty period 15 years
Thermometer resistance at 0 С 53,0±0,3 and 100±0,9 Ohms
Mass not more than 1,5 g
Ресурс в диапазоне температур от -130 до +170о С 33 000 hours
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 033
The thermometer is assigned for measuring of temperature of a flat surfaces
Temperature measuring range
SPECIFICATION
from -50 till +1000о С
VALUE
Storage warranty period 15 years
Thermometer resistance at 0 С 12, 15, 25, 34 Ohms
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 041
The thermometer is assigned for measuring of temperature of surfaces with curvature radius 7..100 mm
Temperature measuring range
SPECIFICATION
from -50 till +1000о С
VALUE
Thermal inertia index less than 0,01 s
Storage warranty period 15 years
Thermometer resistance at 0 С 12,15,25,34 Ohms
Mass not more than 10 g
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 251
The thermometer is assigned for measuring of temperature of surfaces
Temperature measuring range
SPECIFICATION
from -260 till +300о С
VALUE
Total calibration characteristic accuracy ± 0,5˚ С
Thermometer resistance at 0 С 46, 100, 500 Ohms
First cycle duration not less than 15 min.
Assigned resource: within temperature range from -130 till +160 оС
within temperature range from -260 till +300 оС
100 cycles
15 cycles
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 198
The thermometer is assigned for measuring of temperature of cryogenic liquids
Temperature measuring range
SPECIFICATION
from 13 К till 473 К
VALUE
Thermal inertia index not more than 3 s
Storage warranty period 20 years
Thermometer resistance at 0 С 100, 500 Ohms
Mass not more than 74 g
Total calibration characteristic accuracy: - within temperature range from 13 К till 273 К - within temperature range from 273 К till 473 К
± 0,1˚ С ± 0,5˚ С
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 227
The thermometer is assigned for measuring of temperature of cryogenic liquids
Temperature measuring range
SPECIFICATION
от 13 К до 473 К
VALUE
Thermal inertia index not more than 3 s
Storage warranty period 20 years
Thermometer resistance at 0С 25,46,100, and 500 Ohms
Mass not more than 12 g
Total calibration characteristic accuracy: - within temperature range from 13 К till 273 К
- within temperature range from 273 К till 473 К ± 0,1 ˚С ± 0,5 ˚С
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 203
The thermometer is assigned for measuring of temperature of cryogenic liquids
It has ten modifications
Temperature measuring range
SPECIFICATION
from 13 К till 473 К
VALUE
Thermal inertia index not more than 2 s
Storage warranty period 15 years
Thermometer resistance at 0оС 100 and 500 Ohms
Mass not more than 74 g
Total calibration characteristic accuracy: - within temperature range from 13 К till 273 К
- within temperature range from 273 К till 473 К± 0,1˚ С ± 0,5˚ С
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 165
It is assigned for measuring of temperature of a non-aggressive smooth nonconductive gases and liquids.It has five modifications, differing by electrical resistance value at 0 ˚С. It is hermetical up to pressure value of 200 kgf/sm2
Temperature measuring range
SPECIFICATION
from -260 till +300˚ С
VALUE
Thermal inertia index at air velocity value 5±0,5 m/s less than 3 s
Storage warranty period 10 years
Thermometer resistance at 0 С from 25 till 100 Ohms
Mass not more than 0,08 kg
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 175
Temperature measuring range
SPECIFICATION VALUE
not more than 3 s
Storage warranty period 20 years
Thermometer resistance at 0 С from 25 till 100 Ohms
Mass not more than 0,02 kg
Thermal inertia index at air velocity value 5±0,5 m/s
from -260 till +300˚С
It is assigned for measuring of temperature of a non-aggressive smooth nonconductive gases and liquids.It has five modifications, differing by electrical resistance value at 0 ˚С. It is no hermetical
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 073It is assigned for measuring of temperature of a non-aggressive and neutral gases and liquids.It has 15 modifications, differing by electrical resistance value at 0 ˚С and the length of submersible part - from 30 to 56 mm. It is hermetical up to pressure value of 300 kgf/sm2
Temperature measuring range
SPECIFICATION VALUE
Thermal inertia index in boiling water not more than 0,3 s
Storage warranty period 15 years
Thermometer resistance at 0 С from 25 till100 Ohms
Mass not more than 0,06 kg
from -260 till +250˚С
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 085
Temperature measuring range
SPECIFICATION VALUE
Thermal inertia index in boiling water not more than 4 s
Storage warranty period 20 years
Thermometer resistance at 0 С from 25 till 100 Ohms
Mass not more than 0,06 kg
from -260 till +300 ˚С
It is assigned for measuring of temperature of an aggressive gases and liquids under the maximal pressure 600 kgf/cm2.It has 15 modifications, differing by electrical resistance value at 0 ˚С and the length of submersible part - from 30 till 56 mm.
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТП 062
Temperature measuring range
SPECIFICATION VALUE
Thermal inertia index in boiling water not more than 4 s
Storage warranty period 20 years
Thermometer resistance at 0оС from 25 till100 Ohms
Mass not more than 0,06 kg
from -260 till +300˚С
It is assigned for measuring of temperature of both aggressive and non-aggressive gases and liquids under the maximal pressure 300 kgf/cm2.It has 15 modifications, differing by electrical resistance value at 0 ˚С and the length of submersible part - from 30 to 56 mm
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТГЭ 007
Setting point temperatures
SPECIFICATION VALUE
Calibration from the setting point within the range ± 10˚С
Storage warranty period 6 years
Mass not more than 0,09 kg
Temperature measuring sensors
14 and 20˚С
It is assigned for measuring of temperature of non-aggressive liquids
SENSORS AND TRANSDUCERS Space industry
ИС 470А
Temperature measuring range
SPECIFICATION VALUE
Nominal static characteristic of the sensor meets GOST 3044
Warranty period (after putting into operation) 12 years
Mass not more than 0,32 kg
from 0 till +2500˚С
Thermal inertia index not more than 0,25 s
It is assigned for one-time measuring of the non-aggressive gaseous medium temperature
Maximal working pressure 40 MPa
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТТ 135
Temperature measuring range
SPECIFICATION VALUE
Rated static characteristic Meets GOST3044
Storage warranty period (after putting into operation) 15 years
Mass not more than 0,3 kg
from -50 till +1200˚С
Thermal inertia index not more than 0,2 s
It as assigned for measuring of temperature of non-aggressive liquids and gases
Maximal working pressure 60 MPa
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТТ 142
Temperature measuring range
SPECIFICATION VALUE
Rated static characteristic of the sensor meets GOST 3044
Storage warranty period (after putting into operation) 15 years
Mass not more than 0,3 kg
from -50 till +1200˚С
Thermal inertia index not more than 0,8 s
It as assigned for measuring of temperature of aggressive and oxidizing liquids and gases
Maximal working pressure 60 MPa
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТТ 243
Temperature measuring range
SPECIFICATION VALUE
Nominal static characteristic of the sensor meets GOST 3044
Warranty period (after putting into operation) 15 years
Mass not more than 55 g
from -200 till +1000˚С
Measuring accuracy not more than 1%
It is designed for measuring of temperature of the flat surfaces and of surfaces with the curvature radius from 5 mm and more of constructive elements, that are made of various steel and aluminum alloys, titanium and non-metals
Electrical resistance of the thermometer’s circuit from 14,5 Ohms till 65 Ohms
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТТ 257
Temperature measuring range
SPECIFICATION VALUE
Rated static characteristic of the sensor Meets GOST 3044
Storage warranty period (after putting into operation) 15 years
Mass not more than 55 g
from -200 till +1100˚С
Measuring accuracy not more than 1%
Thermometer is as assigned for measuring of temperature of gases
It has two sensing elements
Electrical resistance of the thermometer’s circuit from 14,5 till 65 Ohms
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ТТ 249
Temperature measuring range
SPECIFICATION VALUE
Rated static characteristic of the sensor meets
GOST 3044
Storage warranty period 12 years
Mass not more than 0,2 kg
from -50 till +1000˚С
Thermal inertia index not more than 0,4 s
It is assigned for measuring of temperature of gaseous medium.
Measuring temperature range is 200…850˚С
Maximal working pressure 80 MPa
ТТ 253
It is assigned for measuring of temperature of gaseous flows.
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ИТ 2000
Temperature measuring range
SPECIFICATION VALUE
Working pressure 10 Pa
Storage warranty period 12 years
Mass: - ИТ 2000 - ИТ 2000-01 - ИТ 2000-02
not more than 0,09 кгnot more than 0,11 кгnot more than 0,13 кг
from -215 till +50˚С Individual transformation function of each Ит2000 is DC voltage drop dependent on temperature under working current 100 microamperes, it corresponds to individual transformation function of the thermo-diode sensing device ПТД-100 which is part of the sensor.
This function is represented both as table and as specific polynomial at the passport of each sensor.
Sensor accuracy: - in the range from minus 215 ºС till minus 175 ºС - in the range from minus 175 ºС дtill minus 30 ºС - in the range from minus 30 ºС till +30 ºС - in the range from +30 ºС till +50 ºС
less than ± 0,05 ºС less than ± 0,5 ºСless than ± 0,05 ºСless than ± 0,5 ºС
It is assigned for measuring of temperature of liquid supercooled oxygen in the filling-drainnig lines, non-aggressive and aggressive liquids, as well as product ‘Vinil” at various tanks and lines of carrier rocets.
Thermal inertia index not more than 4 s
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Space industry
ВТ 125
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Temperature sensor ВТ-125 is assigned for measuring of temperature of aviation fuel, oil, and air-oil emulsion.
Sensor produces electric signals, that are proportional to the measured temperature of aviation fuel, oil, and air-oil emulsion, for control-and-monitoring system of an aviation engine.
Sensor contains two sensing elements (two channels) with the nominal resistances of 50 Ohms at 0C.
Effective measured temperature range –60 … +300 CRated static characteristic of the sensor is Pt 50 (GOST 6651, IEC 751)
Measurement accuracy of the sensor in all operating conditions is less than
δ = ± (0,3 + 5 ·10-3 | t| ),
where δ is sensor accuracy, in °С, t is measured temperature, in °С.
Index of thermal inertia (time constant) 2.5 s
Output connector plug СНЦ30-10/14В-1В
Weight 50 g.
Warranty storage period two years
Warranty operation life 13 years after putting into operation
Aircraft industry
ВТ 125М1
SENSORS AND TRANSDUCERS
Temperature measuring sensors
Temperature sensor ВТ-1251 is assigned for measuring of temperature of aviation fuel, oil, and air-oil emulsion.
Sensor produces electric signals, that are proportional to the measured temperature of aviation fuel, oil, and air-oil emulsion, for control-and-monitoring system of an aviation engine.
Sensor contains two sensing elements (two channels) with the nominal resistances of 50 Ohms at 0C.
Effective measured temperature range –60 … +300 CRated static characteristic of the sensor is Pt 50 (GOST 6651, IEC 751)
Measurement accuracy of the sensor in all operating conditions is less than
δ = ± (0,3 + 5 ·10-3 | t| ),
where δ is sensor accuracy, in °С, t is measured temperature, in °С.
Index of thermal inertia (time constant) 2.5 s
Output connector plug 8533-1Y 12-12PN
Weight 50 g
Warranty storage period two years
Warranty operation life 13 years after putting into operation
Aircraft industry
SENSORS AND TRANSDUCERS
Temperature measuring sensors application,Aircraft Industry
Sensor Is used in the engines
ВТ-125
ВТ-125М1
АИ-450С, АИ-450С-2,АИ-222-25, МС-500В,ТВ3-117-СБМ1, series 1
АИ-450С, АИ-450С-2, Д-136-2, Д-18Т series 3М,
Aircraft industry
4000.03.0820
It is assigned for measuring of outflowing gas jets in the process of benchmark trials of engines
Features:-Operability under impact of destabilizing factors-- high reliability--it not requires additional maintenance during operation
Temperature measuring range
SPECIFICATION VALUE
Measuring accuracy within the range from +100 till +900˚ С ± 8,6 ºС
Electrical resistance under normal conditions 8±1 Ohms
Mass not more than 0,03 kg
from 0 till +900˚С
Rated static characteristic of the sensormeets the calibration chart ‘L‘
of GOST 3044
The sensor consists of a thermocouple of type of ХК(L) which is mounted in the case and connected to cable ends. The working hot junction is placed in the case tip, and cable outlets are free ends.
The operating principle of the sensor is based on a thermal e. m. f. generation due to temperature difference between the working hot junction and free ends.
SENSORS AND TRANSDUCERS
Temperature measuring sensors
КТ-МС-400
It is assigned for transformation of the temperature of outgoing gases into thermal e.m.f., which is returned to the measuring and regulating unit as a DC voltage, that is proportional to mean temperature of gases from engine.
Temperature measuring range
SPECIFICATION VALUE
Measuring accuracy within the range from +100 till +900˚ С ± 8,6 ºС
Electrical resistance under normal conditions 10±0,2 Ohms
Mass not more than 0,25 kg
from 0 till +900˚С
Rated static characteristic of the sensormeets the calibration chart ‘К’
of GOST 3044
Time constant at the gas flow velocity more than 100 m/s 2 s
Features:-Operability under impact of destabilizing factors-- high reliability--it not requires additional maintenance during operation
The sensor contains of thermal outlets of the thermocouple cable of type of КТМС. These outlets are connected to the cable ends. Thermal outlets form a hot junction, and cable ands form a free ends.
Thermal outlets meet ОСТ 92-4313
SENSORS AND TRANSDUCERS
Temperature measuring sensors
П120-МС-400
It is assigned for measuring of temperature of deceleration of air flow. The sensor generate a signal to a regulator.
Temperature measuring range
SPECIFICATION VALUE
Sensor static accuracy: - in the range from +30 till +110˚С - in the range from +110 till +170˚С
± 2 ºС± 3 ºС
Electrical resistance at 00С 46±0,25 Ohms
Mass not more than 0,12 kg
from -60 till +200˚С
Rated static characteristicmeets the calibration chart ‘К’
of GOST 3044
Time constant at the gas flow velocity more than 45 m/s 6 s
The sensor contains of a sensing element (of two independent resistors) mounted within the case.
Calibration method – according to the category II of ОСТ92-0694. The sensor generates two independent signals. Calibration table – as the sensor resistance dependence of temperature at points -100, -50, 0, 20, 50, 100, 150, 200 С – is supplied to the passport.
The sensor operating principle is based on a property of platinum wire to change its resistance with the temperature change.
SENSORS AND TRANSDUCERS
Temperature measuring sensors
ФЛА 005
Heat flow sensors
Radiant heat flux density measuring range
SPECIFICATION VALUE
Rated static characteristic meets GOST 3044-94
Storage warranty period 12 years
Mass not more than 0,4 kg
from 0 till 630 kW/m2
Sensitivity: - ФЛА 005 - ФЛА 005-01 - ФЛА 005-02
54-89 V х m2/kW28-49 V х m2/kW13-36 V х m2/kW
It is assigned for one-time measuring of a radiant heat flux density
SENSORS AND TRANSDUCERS Space industry
ФЛА 013
Radiant heat flux density measuring range
SPECIFICATION VALUE
Storage warranty period 12 years
Mass not more than 0,35 kg
from 0 till 2500 kW/m2
It is assigned for one-time measuring of a total heat flux density
SENSORS AND TRANSDUCERS
Heat flow sensors
Space industry
(ДТО) 4К270-7382-0
Measuring temperature range
SPECIFICATION VALUE
Mass not more than 1 kg
from -189 till -181°С
The sensor is assigned for measuring of the mean temperature of an oxide within a pipeline.
The sensor is a part of a pipeline with the resistance thermometer , that is built in it. The sensing elements of the sensor receive the liquid temperature and change their resistances in a way, that stated in GOST 6651-84.
Rated temperature -187°С
Working liquid density at the rated temperature 1,155 kg/liter
Thermal inertia index not more than 1,5 s
Internal pressure not more than 14,2 MPa
The sensor contains three independent sensing elements; the resistance value of each sensing element is 200 Ohms at 0°С.
Storage warranty period 10 years
SENSORS AND TRANSDUCERS
Heat flow sensors
Space industry
Thermocouple collector ВТ-4(-1)
SENSORS AND TRANSDUCERS
Thermocouple collectors
Thermocouple collector BT-4(-1) is designed for transformation of the aircraft engine outgoing gas temperature into the thermal electromotive force and producing two autonomous DC voltages, that are proportional to the averaged gas temperature, and sending them to automatic control system.
The collector consists of four inseparable doubled thermocouples that form two independent measuring circuits which are ended in a mutual carrier socket.
SPECIFICATION VALUE
Averaged measured temperature range –60 … +1150COperating measured temperature range +200 … +800 CNominal static characteristic Chromel-alumel XA(K)
(GOST 3044, IEC)Allowable variation of thermocouple material class 2 (GOST 3044)Index of thermal inertia (time constant) 2.5 s(gas flow velocity 215 m/s, static pressure 10.68104 Pa)Quantity of independent electric signals 2in every thermocouple
Aircraft industry
SENSORS AND TRANSDUCERS
Thermocouple collector application,Aircraft Industry
Sensor Is used in the engines
ВТ-4(-1) АИ-450М, АИ-450М1,АИ-450С, АИ-450-С2
Thermocouple collector ВТ-4(-1)
Aircraft industry
SENSORS AND TRANSDUCERS
Thermocouple ВТ-36
Thermocouples
Aircraft industry
It is assigned for measuring of gas temperature at turbine of air gas-turbine engines
Number or output signals twoTemperature calibration type XAWorking medium GTE combustion materialsEffective measuring range from 450 till 1000 CMaximal working temperature 1110 C (up to 5% of service life)Rated static characteristic XA(K) GOST 3044Maximum permission error class 2 (GOST 3044)Mass 0.14 kgInsulation resistance:
Normal conditions not less than 0.5 MOhms700 C at working end not less than 0.05 Mohms
Insulating strength 350 V (under normal conditions)
SENSORS AND TRANSDUCERS
Thermocouple ВТ-36
Thermocouples
BT-36 outline drawing
Thermocouple BT-36 application
Sensor is used in the engines
ВТ-36 ВК-2500 (series 1),ТВ3-117ВМА-СБМ1В,ТВ3-117ВМА-СБМ1В (series 1),ТВ3-117ВМА-СБМ1В (series 2),ТВ3-117ВМА-СБМ1В 4/4E
Aircraft industry
ВТ-98
Breaking temperature sensor
SENSORS AND TRANSDUCERS Aircraft industry
Two-channel breaking temperature sensor is designed to produce electric signals, that are proportional to the measured air temperature, and sending them to digital and analogous automatic control systems. Effective measured temperature range –60 … +300 CNominal static characteristic of the sensor is Pt 50 (GOST 6651, IEC 751)Measurement accuracy of the sensor in the temperature range –60 … +25 C
δ = ± (0.35 + 5 ·10-3 | t| ), where δ is sensor accuracy, in °С, t is measured temperature, in °С.
Measurement accuracy of the sensor in the temperature range +25 … +300 Cδ = ± (0.5 + 5 ·10-3 | t| ),
Index of thermal inertia (time constant) 1.4 s(air flow velocity 150 m/s and static pressure up to 98 kPa) Weight 0.15 kgQuantity of independent electrical signals 2Operating life 13 years
ВТ-98
Breaking temperature sensor
SENSORS AND TRANSDUCERS Aircraft industry
BT-98 outline drawingBT-98 view
ВТ-98
Breaking temperature sensor
SENSORS AND TRANSDUCERS Aircraft industry
Breaking temperature sensor BT-98 application
Sensor Is used in the engines
ВТ-98 АИ-450М1, АИ-450М2,АИ-450С, АИ-450-С2,АИ-450С, АИ-450С2,АИ-450МС, МС-500В, МС-14, Д-336 (in ГТЭ МС-2,5),ТВ3-117-ВМА-СБМ1В, series 1,МС-500В, АИ-450М
ВТ 306
Pressure sensors and differential pressure switches
Measuring range
SPECIFICATION VALUE
Working temperature range from +60оС till -196оС
Storage warranty period 15 years
Mass not more than 0,18 kg
from 0,1 till 5,0 kgf/cm2
It is assigned for transformation of fast-varying pressure of liquid and gaseous media to electric signal
Working frequency range from 11,2 Hz till 11 000 Hz
Switch sensitivity Not less than 50 mV/kgf cm2
Slowly varying pressure range from 0,5 till 5,6 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
ВТ 308
Pressure sensors
Measuring range
SPECIFICATION VALUE
Working temperature range from +80оС till -196оС
Storage warranty period 15 years
Mass not more than 0,18 kg
from 1,2 till 56 kgf/cm2
It is assigned for transformation of fast-varying pressure of liquid and gaseous media to electric signal
Working frequency range from 11 Hz till 10 000 Hz
Transducer sensitivity not less than 4 mV/kgf cm2
Slowly varying pressure range from 110 till 1250 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
ВТ 309
Pressure sensors
Measuring range
SPECIFICATION VALUE
Working temperature range from 77 К till 473 К
Storage warranty period 15 years
Mass not more than 0,15 kg
from 2,5 till 50 kgf/см2
It is assigned for transformation of fast-varying pressure of liquid and gaseous media to electric signal
Working frequency range from 20 Hz till 10 000 Hz
Transducer sensitivity Not less than 10 mV/kgf cm2
Slowly varying pressure range from 110 till 900 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
ЛХ 612М
Pressure sensors
Measuring range
SPECIFICATION VALUE
Working temperature range from 293 К till 2273 К
Storage warranty period 8 years
Mass not more than 0,12 kg
from 0,45 till 56 kgf/cm2
It is assigned for transformation of fast-varying pressure of liquid or gaseous non-aggressive media to electric signal
Working frequency range from 20 Hz till 10 000 Hz
Transducer sensitivity not less than 16 mV/kgf cm2
Slowly varying pressure range from 28 till 630 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
ЛХ 611АМ
Pressure sensors
Measuring range
SPECIFICATION VALUE
Working temperature range from 77 К till 473 К
Storage warranty period 15 years
Mass not more than 0,15 kg
from 0,45 till 56 kgf/cm2
It is assigned for transformation of fast-varying pressure of liquid and gaseous media to electric signal
Working frequency range from 31,5 Hz till 5 000 Hz
Transducer sensitivity not less than 20 mV/kgf cm2
Slowly varying pressure range from 28 till 630 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
ЛХ 611М
Pressure sensors
Measuring range
SPECIFICATION VALUE
Working temperature range from 77 К till 473 К
Storage warranty period 8 years
Mass not more than 0,1 kg
from 0,45 till 56 kgf/cm2
It is assigned for transformation of fast-varying pressure of liquid or gaseous non-aggressive media to electric signal
Working frequency range from 31,5 Hz till 5 000 Hz
Transducer sensitivity not less than 20 mV/kgf cm2
Slowly varying pressure range от 40 до 630 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
ВТ 222М
Pressure sensors
Upper limit of the absolute pressure effective range, for various versions:
SPECIFICATION VALUE
Basic error, from the upper limit of effective range not more than ± 2,5 %
Mass not more than 0,65 kg
0 - 1500 mm Hg
It is assigned for measuring of static and slowly varying pressure of gaseous media and of vapor phase.
Supply voltage is 27 VDC.
The sensor preserves its performance capability under the temperature of environment up to +50оС
SENSORS AND TRANSDUCERS Space industry
ВТ 219
Pressure sensors
Absolute pressure effective range, for various versions:
SPECIFICATION VALUE
Working temperature range from -500С till +500С
Mass not more than 250 g
(0-0,16;0-0,30; 0-0,60) х 105 Pa
It is assigned for measuring of absolute pressure of working media: gaseous or vapor phase.
Supply voltage is 6 VDC.
Initial output signal, equivalent to unit supply voltage at the receiving chamber pressure of 13,3 Pa (0,1 mm Hg)
in the range ± 0,15 mV/V
Overall dimensions 87 х 60 mm
SENSORS AND TRANSDUCERS Space industry
ВТ 220
Pressure sensors
Absolute pressure effective range, for various versions:
SPECIFICATION VALUE
Mass not more than 160 g
(0-1,25;0-2,5; 0-5) 105 Pa
It is assigned for measuring of absolute pressure of working media: gaseous or vapor phase.
Supply voltage is 6 VDC.
Initial output signal, equivalent to unit supply voltage at the receiving chamber pressure of 13,3 Pa (0,1 mm Hg)
in the range ± 0,15 mV/V
Overall dimensions 87 х 30 mm
SENSORS AND TRANSDUCERS Space industry
ДАВ 68
Pressure sensors
Absolute pressure effective range, for various versions:
SPECIFICATION VALUE
Working temperature range from -600С till +2500С
Mass not more than 200 g
(0-0,3;0-0,6;0-1,25;0-2,5;0-5,0;0-10;0-16) х 105 Pa
It is assigned for measuring of absolute pressure in liquid and gaseous media
Supply voltage is 6 VDC.
Initial output signal, equivalent to unit supply voltage at the receiving chamber pressure of 13,3 Pa (0,1 mm Hg)
in the range ±0,15 mV/V
Overall dimensions 87 х 30 mm
SENSORS AND TRANSDUCERS Space industry
ВТ 206
Pressure sensors
Measuring pressure range
SPECIFICATION VALUE
Measurement accuracy not more than 0,8%
Mass not more than 150 g
from 0 till 60 MPa,12 ranges (0-1,0; 1,4; 2,0 ;2.8; 4,0; 5,6;
8,0; 11,0; 16,0; 22,0; 30,0; 45,0; 60,0) MPa
It is assigned for measuring of statico-dinamic pressure.
The sensor is of tensoresistive membrane type. The sensing element is thin-film bridge circuit.The sensor is used with the secondary data-processing equipmentSupply voltage is 6 VDC
Output signal +9 mV
Overall dimensions 22 х 90 mm
Working frequency range from 0 till 200 Hz
Working temperature range from -1960С till +500С
SENSORS AND TRANSDUCERS Space industry
ВТ 212
Pressure sensors
Measuring pressure range
SPECIFICATION VALUE
Measurement accuracy not more than 0,6%
Mass not more than 120 g
from 0 till 125,0 MPa,(0-1,0;1,4;2,0;2.8;4,0;5,6;8,0;11,0;
16,0;22,0;30,0;45,0;60,0;90,0;125,0) MPa
It is assigned for measuring of statico-dinamic pressure.
There are two version, with heat exchange bushing and without it; and 13 ranges of the rated pressure.Supply voltage is 6 VDC.
Output signal +9 mV
Overall dimensions 22 х 80 mm
Working frequency range from 0 till 200 Hz
Working temperature range from -300С till +500С
The sensor is of tensoresistive membrane type. The sensing element is thin-film bridge circuit.The sensor is used with the secondary data-processing equipment
SENSORS AND TRANSDUCERS Space industry
ВТ 1201
Pressure sensors
Measuring pressure range
SPECIFICATION VALUE
Measuring mean square deviation ±0,25%
Mass not more than 300 g
from 0,5 till 180,0 MPa,(0-1,0;1,4;2,0;2.8;4,0;5,6;8,0;11,0;16,0;22,0;
30,0;45,0; 60,0;90,0;125,0;180,0) MPa
It is assigned for the measuring of excess pressure and pressure, that rising with gradient up to 1000 MPa/s. measured media: gases, vapor and liquids.
Supply voltage is 27 VDC.
Overall dimensions: - amplifier - transducer
25 х 76 mm30 х 76 mm
Working temperature range from -500С till +500С Output signal: amplitude 2,8..5 V, frequency 15..22 kHz.
It has 27 versions in dependence of material (flexible tube of ТКР and rigid tube of 12Х18Н10Т) and length of a jumper and the value of a measured pressure.
SENSORS AND TRANSDUCERS Space industry
ВТ 1202
Pressure sensors
Measuring pressure range
SPECIFICATION VALUE
Measuring mean square deviation ±0,15%
Mass not more than 320 g
from 0,5 till 60,0 MPa, (0-1,0;1,4;2,0;2.8; 4,0;5,6;8,0; 11,0;16,0;
22,0;30,0;45,0;60) MPa
It is assigned for the measuring of excess static and slow varying pressure and pressure. Measured media: vapor and liquids.
Supply voltage is 27 VDC.
Overall dimensions: - amplifier - transducer
25 х 76 mm30 х 76 mm
Working temperature range from -500С till +500С
It has 27 versions in dependence of length of a jumper cable (0.5 m, 1 m, 1.5 m) and the value of a measured pressure.Output signal: amplitude 2,8..5 V, frequency 15..22 kHz.
SENSORS AND TRANSDUCERS Space industry
ДАТ-12АЭ2
Pressure sensors
SENSORS AND TRANSDUCERS
The transducer is designed for remote measuring of absolute pressure of neutral liquids and gases, including:Fuels Т-1; Т-5; ТС-1; ТС-1Г; РГ-1; Т-7П; Т-8;
Т-8В, and other aviation fuels; Oils ВНИИНП-50-4Ф; МС-8РК36/1; МК-8; air and other aviation oils.
the transducer sends signals to the engine regulator or to control devices.
Absolute pressure transducer
СПД-0,4
Maximal working pressure
SPECIFICATION VALUE
Triggering pressure
Current across contacts 0,3А
0,45 MPa
Differential pressure switch
The switch is designed for inspection of clogging of fuel, oil, and hydraulic filters and generating a signal to the warning lamp.
Measured media: aviation fuel and oil
DC voltage
0,04 MPa
Triggering accuracy ±0,01 MPa
27 V±10%
SENSORS AND TRANSDUCERS
Inspected medium temperature – 60 … +175 °С
Mass 0.1 kg
Aircraft industry
Differential pressure switch
СПД-1,0
Maximal working pressure
SPECIFICATION VALUE
Triggering pressure
Current across contacts 0,3 A
0,45 MPa
Differential pressure switch
The switch is designed for inspection of clogging of fuel, oil, and hydraulic filters and generating a signal to the warning lamp.
Measured media: aviation fuel and oil
DC voltage
0,10 MPa
Triggering accuracy ±0,02 MPa
27В±10%
Maximal pressure drop 0,13 MPa
Inspected medium temperature от -60 до +175 0С
Mass
from -60 till +175 0С
not more than 0,1 kg
SENSORS AND TRANSDUCERS Aircraft industry
Differential pressure switch
СПД-0,6
Maximal working pressure
SPECIFICATION VALUE
Triggering pressure
Current across contacts 0,3 A
0,45 MPa
Differential pressure switch
The switch is designed for inspection of clogging of fuel, oil, and hydraulic filters and generating a signal to the warning lamp.
Measured media: aviation fuel and oil
DC voltage
0,06 MPa
Triggering accuracy ± 0,012 MPa
27В±10%
Maximal pressure drop 0,13 MPa
Inspected medium temperature от -60 до +175 0С
Mass
from -60 till +175 0С
not more than 0,1 kg
SENSORS AND TRANSDUCERS Aircraft industry
Differential pressure switch
SENSORS AND TRANSDUCERS
Differential pressure switch application
Switch Is used in the engines
СПД-0,4; СПД-0,6; СПД-1,0 АИ-25, Д-27, АИ-222-25,АИ222К-25, АИ-222К-25Ф,ТВ3-117ВМА-СБМ1, ТТМ-25,АИ-450М, АИ-450М1,АИ-450С, АИ-450-С2, Д-436-148, Д-436-Т1, Д-436-ТП, Д-136-2, Д-36 (all series), Д-136 (all series),combustion-oil unit 317070500
Differential pressure switch
Aircraft industry
SENSORS AND TRANSDUCERS
Small size pressure switch
МСД (-А , -С, -М, -Т)
The switch is designed for contact breaking (contact closure) of the electric circuit when the pressure of the working medium in the input unit of the switch reaches triggering (actuation) level.
Product code without letter A (e.g. МСД) means the variant of switch with normally closed contacts (without pressure);a)Product code with letter A (e.g. МСД-А) means the variant of switch with normally open contacts (without pressure); b)Product code with letter C (e.g. МСД-С) means the switch with special connecting pipe;c)Product code with letter M (e.g. МСД-М) means the switch for higher temperature;d)Product code with letter C (e.g. МСД-С) means the switch with extended precision. Point of adjustment 0.05; 0.12; 0.15; 0.16; 0.17; 0.25 MPaError of activation (for a point of adjustment):
0.05 MPa ±0.02 MPa0.12; 0.15; 0.16 MPa ±0.03 MPa0.25 MPa ±0.045 MPa(Т) 0.05 Mpa ±0,01 MPa(Т) 0.17 MPa ±0,015 MPa
Direct current voltage 27 V ±10%Current across contact:
with resistive load 1.5 Awith inductive-resistive load 0.5 A
Measured medium temperature (for variants):МСД (-А) – 60 … +180 CМСД (-А) –М – 60 … +220 C
Weight (for variants):МСД (-А) 0.18 kgМСД (-А) –С 0.22 kg
SENSORS AND TRANSDUCERS
Small size pressure switch
МСД (-А , -С, -М, -Т)
Image of МСД(-А, -С, -М, -Т) Outline drawing for МСД(-А, -С, -М, -Т) and their seats
SENSORS AND TRANSDUCERS
Small size pressure switch application
Switch Is used in the engines
МСД (-А , -С, -М, -Т) АИ-9, АИ-9В, АИ-9К, АИ-9В (series 1), АИ-25, Д-27, АИ-222-25, МС-14, МС-500В (all modifications), АИ222К-25, АИ-222К-25Ф,ТВ3-117ВМА-СБМ1, ТТМ-25,АИ-450М, АИ-450М1, АИ-450С, АИ-450-С2, Д-18Т (all series),Д-436-148, Д-436-Т1, Д-436-ТП, Д-27, Д-136-2, Д-36 (all series), Д-136 (all series), ТВ3-117 (all modifications),ГТЭ-МС-2,5, ГТЭ-МС-6,3/МС, ГТЭ-МС-8/МС
Aircraft industry
Small size pressure switch
МСД (-А , -С, -М, -Т)
ДХС 516
Датчики звуковых давлений
The sensor is assigned for conversion of acoustic pressure of gaseous medium to electric signal
SPECIFICATION VALUE
Working frequency range from 10 till 4000 Hz
Mass not more than 0,16 kg
Effective acoustic pressure measuring range from 200 till 63240 Pa
Storage warranty period 14 years
Slowly varying pressure range from 0,5 till 16 kgf/cm2
Sensibility 600 ± 350 mV/kgf cm
SENSORS AND TRANSDUCERS Space industry
ДХС 517
Датчики звуковых давлений
The sensor is assigned for conversion of acoustic pressure of gaseous medium to electric signal
SPECIFICATION VALUE
Working frequency range from 3 till 4000 Hz
Mass not more than 0,13 kg
Effective acoustic pressure measuring range from 30 till 35480 Pa
Storage warranty period хранения 10 years
Slowly varying pressure range from 0,1 till 2 kgf/cm2
Sensibility 5000 ± 3000 mV/kgf cm .
Working temperature range from 203 till 473 К
SENSORS AND TRANSDUCERS Space industry
ИС-144
It is assigned for measuring of rotary speed of shafts within the range of 0 - 21000 ± 1000 rpm; one closing or disjunction of the contacts takes place every 50 ±10 turns of the input shaft
Measuring number of turns
SPECIFICATION VALUE
Electric circuit resistance on the assumptions of open contacts
not less than 10 MOhms
Mass 650±30 g
0 - 21000 ± 1000 rpm
Transient resistance of closed contacts, at current of 300 A under normal conditions
not more than 0,5 Ohms
Overall dimensions 143 х 110 mm
Working temperature range from -500С till +700С
SENSORS AND TRANSDUCERS Space industry
Rotation velocity sensors
ИС-513
It is assigned for measuring of rotary speed from 1000 till 40 000 rpm
SENSORS AND TRANSDUCERS Space industry
Rotation velocity sensors
ВТ 1850
It is assigned for conversion of shaft rotary speed to pulse-repetition frequency of electric pulses. Monitored rotary speed range is more then 3000 rpm.
SPECIFICATION VALUE
Output signal amplitude (with non-magnetic screen of thickness not more than 1,7 mm)
not less than 100 mV
Mass not more than 85 g
Monitored rotary speed range more than 3000 rpm
Overall dimensions 9,8 х 500 х 49,2 mm
SENSORS AND TRANSDUCERS Space industry
Rotation velocity sensors
ВТ 1856
It is assigned for conversion of shaft rotary speed to pulse-repetition frequency of electric pulses.
The transducer is hermetic.
SPECIFICATION VALUE
Output signal amplitude (with non-magnetic screen of thickness not more than 1 mm)
not less than 100 mV
Mass not more than 140 g
Monitored rotary speed range more than 3000 rpm
Environment temperature 1000С
SENSORS AND TRANSDUCERS Space industry
Rotation velocity sensors
ОГ018
It is assigned for conversion of shaft rotary speed to pulse-repetition frequency of electric pulses. Monitored rotary speed range is more then 1000 rpm.
SPECIFICATION VALUE
Output signal amplitude (RH is not less than 10 kOhms andСH is not more than 10000 pF)
from 0,15 till 10 V
Monitored rotary speed range more than 1000 rpm
Overall dimensions 600 х 24,5 ; 1000 х 24,5 mm
SENSORS AND TRANSDUCERS Space industry
Rotation velocity sensors
ВТ-10
Rotation velocity sensors
SENSORS AND TRANSDUCERS
Rotation velocity sensor ВТ-10 is designed for measuring of angular velocity of a rotor and sending of relevant signal, that is similar to sinusoidal one, to control system. The sensor operates with the inductor which is a cogwheel made from the steel 14ХГСН2МА-Ш or 30Х2Н2ВФМА-Ш; number of teeth is 61, module is 2.5, and tooth length is 16 mm. The working cogwheel may be used as inductor.The voltage amplitude of the sensor on the active load 2 kOhms:-with the rotational velocity 1400 revolutions per minute and the radial gap between the end face of the sensor and the inductor 1.3 mm 0.2 V;-with the rotational velocity 14200 revolutions per minute and the radial gap between the end face of the sensor and the inductor 0.7 mm 10.0 VResistance of the winding of the sensor at normal conditions 27040 Ohms;Warranty storage period 3 years Warranty operation life 7 years after putting into operation subject to storage periodWarranty life 1000 hours for the engine Д-36 and 8000 hours for other engines Operating temperature –60 … +250 СVibration frequency 10 … 4000 Hz (with overloading up to 100g)Weight 0.1 kgConnecting to the load by soldering of two connecting wires (with cross-section 0.75 mm2) to the finger contacts of the sensor
Aircraft industry
SENSORS AND TRANSDUCERS
ВТ-10
Rotation velocity sensors
Aircraft industry
Sensor Is used in the engines
ВТ-10 ВК-2506, ТВ3-117ВМА-СБМ1, ТВ3-117ВМА-СБМ1-4 (4Е),ТВ3-117 (all models)
Rotation velocity sensor application
SENSORS AND TRANSDUCERS
ВТ-15
Rotation velocity sensors
Rotation velocity sensor ВТ-15 is designed for measuring of angular velocity of a rotor and sending of two relevant independent electric signals, that are similar to sinusoidal ones, to control system. The sensor operates with the inductor which is a cogwheel made from the steel 20Х13; number of teeth is 32, module is 5, and tooth thickness is 15 mm. The working cogwheel may be used as inductor.The voltage amplitude of the sensor on the active load 20.2 kOhms as in the following table:
Linear velocity of inductor
(addendum circle), m/s
Rotation frequency of
inductor, 1/min (frequency of
output signal, Hz)
Amplitude of output signal, V, Gap between the end face of the
sensor and inductor, mm
At any service conditions
At normal service
conditions
0.9 100 (53) 0.05 0.06 0.7 2.5 280 (150) 0.2 0.25 0.7 4.0 450 (240) 0.3 0.35 0.7 8.5 960 (512) 0.7 0.9 0.7 15.5 1740 (928) 0.85 1.1 0.7
40.0 4490 (2395) 1,5 1.75 0.7 15 15 0.3
300 28125 (15000) 1.6 2.0 0.7 30 30 0.3
Aircraft industry
ВТ-15 (М)
Rotation velocity sensors
SENSORS AND TRANSDUCERS
Resistance of the winding of the sensor at normal conditions 477 Ohms;Operation life 30,000 hours in the course of 15 yearsOperating temperature –60 … +180 СVibration frequency 5 … 2000 Hz (with overloading up to 30g)Weight 0.2 kgConnecting to the load by connector СНЦ28-4/14
ВТ-15 ВТ-15М
Aircraft industry
SENSORS AND TRANSDUCERS
ВТ-15 (М)
Rotation velocity sensors
Sensor Is used in the engines
ВТ-15 (М) АИ9-3Б, АИ-450М, АИ-450М1,АИ-450М2, АИ-450С, АИ-450С2,ТВ3-117ВМА-СБМ1, АИ-222К25,Д-436ТП, Д-436ТП-М, ТПМ
Aircraft industry
Rotation velocity sensor application
SENSORS AND TRANSDUCERS
ВТ-1004
Rotation velocity sensors
Rotation velocity sensor ВТ-1004 is designed for measuring of angular velocity of a rotor and sending of two relevant electric signals, that are similar to sinusoidal ones, to control system. The sensor operates with the inductor which is a cogwheel made from the steel 30Ч2ВМФА-Ш; number of teeth is 61, module is 2.5, and tooth length is 16 mm. The working cogwheel may be used as inductor.The voltage amplitude of the sensor on the active load 2 kOhms:-with the rotational velocity 1400 – 6000 revolutions per minute and the radial gap between the end face of the sensor and the inductor 1.3 mm 0.4 V;-with the rotational velocity 6000 - 14200 revolutions per minute and the radial gap between the end face of the sensor and the inductor 1.1 mm 16.0 VResistance of the windings of the sensor at normal conditions:
coil 1 365 Ohms;coil 2 9010 Ohms
Subject to the cable (resistance is approx. 0.72 Ohms/m)coil 1 416 Ohms;coil 2 9511 Ohms
Operation life 40,000 hours in the course of 40 yearsOperating temperature –60 … +350 СVibration frequency 5 … 2000 Hz (with overloading up to 30g)Weight 0.2 kgConnecting to the load by the 4-wire cable in non-magnetic braided shield
Aircraft industry
SENSORS AND TRANSDUCERS
ВТ-1004
Rotation velocity sensors
Aircraft industry
ВТ-718
Linear displacement sensors
It is assigned for measuring of linear displacements of a blocks of mechanical systems, and their conversion to electric signal
SPECIFICATION VALUE
Mass not more than 0,3 kg
Measuring range0-16 mm, 0-22 mm, 0-30 mm, 0-45 mm, 0-60 mm,
0-90 mm, 0-125 mm, 0-180 mm, 0-250 mm,0-350 mm, 0-500 mm, 0-700 mm, 0-750 mm.
Cable length 515±15 mm
Transducer supply voltage 6±1 VDC
Overall dimensions 33,5 х 40 х 90 mm
Basic error not more than 2%
SENSORS AND TRANSDUCERS Space industry
ВТ-721 (VT-721)
Linear displacement sensors
It is assigned for conversion of linear displacements of parts of a product to electric signal
SPECIFICATION VALUE
Mass not more than 0,9 kg
Measuring range0-0,5 m, 0-1,0 m, 0-1,4 m, 0-2,0 m, 0-4,0 m,
0-5,6 m, 0-8,0 m, 0-11 m, 0-16 m
Cable length 500±15 mm
Transducer supply voltage 6±1 ВVDC
Overall dimensions 43,5 х 76 х 120 mm
Basic error ±1%
SENSORS AND TRANSDUCERS Space industry
ВТ-714
It is assigned for measuring of linear and angle (in two perpendicular planes) displacements of a blocks of mechanical systems, and their conversion to electric signal
SPECIFICATION VALUE
Mass not more than 1 kg
Measuring range: - along paths - along angles
0-16 m ±700
Cable length 500±15 mm
Transducer supply voltage 6±1 VDC
Overall dimensions 56 х 120 х 133 mm
Basic error: - along linear displacements - along angle displacements
not more than 1%not more than 2%
SENSORS AND TRANSDUCERS Space industry
Linear displacement sensors
ВТ-712
It is assigned for measuring of angle (in one plane) displacements of a blocks of mechanical systems, and their conversion to electric signal
SPECIFICATION VALUE
Mass not more than 0,2 kg
Cable length 515±15 mm
Transducer supply voltage 6±1 VDC
Overall dimensions 53 х 56 mm
Basic error not more than 1%
Measuring range (radians, degrees)0-1,12 (0-64), 0-1,60 (0-92), 0-2,20 (0-126),
0-3,20 (0-183), 0-4,40 (0-252), 0-6,00 (0-344), 0-9,00 (0-516), 0-12,00 (0-688)
SENSORS AND TRANSDUCERS Space industry
Linear displacement sensors
ВТ-713
It is assigned for measuring of linear displacements of blocks of a product and their conversion to electric signal
The transducer is meant for joint operation with a recording device which has input resistance not less than 500 kOhms
SPECIFICATION VALUE
Mass not more than 0,18 kg
Transducer supply voltagr 6±0,2 VDC
Static error under operation conditions not more than 2%
Measuring range 0-5,6 mm, 0-8 mm, 0-11 mm, 0-16 mm,
0-22 mm, 0-30 mm, 0-45 mm
SENSORS AND TRANSDUCERS Space industry
Linear displacement sensors
ПЛХ 001
Contactless displacement sensor
It is assigned for positional checking of movable operating elements of executive mechanisms of technological equipment.
The sensor is meant for expose to oils of type АМГ-10. The distance between two adjacent one-type sensors is not less than their diameter, and between different-type sensors is not less than the bigger sensor diameter.
SPECIFICATION VALUE
Actuation repeatability accuracy
not more than 0,12 kg
Sinusoidal vibrations exposureacceleration amplitude 100 m/s2
frequency 55-60 Hz
Supply voltage ripple factor in the frequency band20 - 1000 Hz not more than 6%
Switching speeds not more than 1000 Hz
Environment temperature from -20 till +700С
Relative humidity, at temperature 25±10 оC up to 80%
Air pressure 645 - 795 mm Hg
Actuation zone, with effecting element from steel 20 , under supply voltage 24 VDC 1; 2; 3,5; 4,7 mm,
dependent of the range
±0,03 mm
Warm-up time not more than 30 s
Mass
Service life is 107 cyclesRunning hours – 18000 hours.
SENSORS AND TRANSDUCERS Space industry
ВТ-51 (VT-51)
Accelerometers
It is assigned for measuring of linear acceleration
SPECIFICATION VALUE
Mass not more than 0,5 кг
Supply voltage 27 (+7;-4) В
Basic error ± 3%
Measuring rangefrom ± 11m/s2 till 4 000 m/s2
frequency ranges (0-8, 0-16, 0-32, 0-64, 0-256) Hz.
Output voltage 0…6 В
SENSORS AND TRANSDUCERS Space industry
СД 722 (SD722)
It is assigned for measuring of pressure
Operation threshold is 35 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
Special designation sensors
СИД 716 (SID716)
It is assigned for measuring of excess pressure
Operation threshold is 0,8 ± 0,1 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
Special designation sensors
ДИД 707 (DID707)
It is assigned for measuring of excess pressureIn the range 0 – 160 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
Special designation sensors
ДР 718 (DR718)
Negative pressure sensor
Working range is 0 - 0,25 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
Special designation sensors
ДРД (DRD)
Special designation sensors
Pressure difference sensor
Working ranges: 0,125+0,125; 0…6; 0…0,025; 0…0,15; 0…0,25 kgf/cm2
SENSORS AND TRANSDUCERS Space industry
ЛХ 5556
SPECIFICATION VALUE
Irregularity of the frequency response
not more than 2,2 kg
Number of the fixed measuring ranges 5
Working temperature range от -50 до +500С
Relative humidity at temperature 25±10 оC до 98%
Air pressure 2 atm.
Linearity of amplitude characteristic accuracy (from 6 В) ±0,4%
1,5%
Mass
The transducer is assigned for joint working with isometric sensors of type of Лх, Вт (bridge circuits with a branch resistance 700±35 Ohms and starting unbalance of ±60%. \
It has dust-ignition-proof construction.
It has four measuring channels which are identical and mutually independent.
Supply voltage 27 (+7;-4) VDC
Number of frequency ranges7: : 0-16, 0- 32, 0-64, 0-125, 0-250, 0-500 and 0-700 Hz
SENSORS AND TRANSDUCERS
Transducers
Space industry
ВТ 5611 (VT5611)
The transducer Вт5611 is assigned for measuring of rotary speeds
SENSORS AND TRANSDUCERS
Transducers
Space industry
Transducers
SENSORS AND TRANSDUCERS
ВТ 5611 (VT5611)
The transducer Вт5611 is assigned for measuring of rotary speeds, it operates jointly with an inductive sensors which have the output voltage from 0,06 V till 10 V (ИС-513, ОГ 018 et al.).
The transducer is resistant to vibrations, strokes, linear accelerations, acoustic noise. It has the checking circuit for ‘sensor – transducer” input circuit monitoring.
Measuring range 25 … 10 000 HzOutput signal 0 … 60.2 VAccuracy not more than 1.6%Supply voltage 28 (+6, -4) VDCCurrent consumption not more than 0.22 AOperating temperature range from –50 till +50 CNumber of channels 2Service life 200 hoursCable length:
sensor – transducer up to 40 mtransducer – recorder up to 70 m
Overall dimensions 55х130х73 mmMass 1,35 kg
УРАН (URAN)
The transducer is assigned for measuring of liquid medium level .It operates jointly with ultrasonic level sensors.
Output information is represented as binary parallel code which has two service bits and 12 informational bits, of TTL levels
SENSORS AND TRANSDUCERS
Transducers
Space industry
Level of liquid measuring range 70…2000 mm (it depends by the sensor))Supply voltage 27(+7, -4) VDC Consumption current not more than 0.3 AWorking temperature range from -50 till +50 CService life 2000 hoursOverall dimensions 131х122х80 mmMass not more than 1,5 kg
ПРИНТ (PRINT)
The transducer is assigned for conversion of signals from thermometers (both resistance and thermoelectric ones) into input analog and digit signals for control systems
SENSORS AND TRANSDUCERS
Transducers
Space industry
ПРИНТ-01 (PRINT-01)
The transducer is assigned for conversion of signals from thermometers (both resistance and thermoelectric ones) into input analog and digit signals for control systems
SENSORS AND TRANSDUCERS
Transducers
Space industry
Transducers
SENSORS AND TRANSDUCERS
Main technical data ParametersTolerance, %, not more than
Digit output for thermoresistanes 0,15Digit output for thermocouples 0,45Analog output for thermoresistanes 0,25Analog output for thermocouples 0,45
Supply voltage, V 27Output signal Analog output, V 0 .. 6,2Digit output 12 position code
Switching regimesAutonomous and
synchronous Measuring scales 7 resistive and one voltageOperating temperature range, C –50 .. +50Current consumption, mA, no more than 70Number of switched channels 32Warranty resource, hours 2000Weight, kg 1,1
ПРИНТ-01 (PRINT-01)
ПСТД (PSTD)
Transducer is designed for voltage supplying of pressure sensors (of type of VT 206, VT 212 et al) and for conversion of their signals into input signals for control systems
SPECIFICATION VALUE
Basic error not more than 5%
Measuring range of ΔR/R (2,8; 5,6; 16)·10-3
Sensor supply voltage 6 V
Output signal 0…6 В
Frequency range from 0 till 16; 31,5; 63; 125; 250; 500; 1000 Hz
Supply voltage 28(+5,-4) VDC
Consumption current not more than 110 mA
Working temperature range from -50 till +500С
Mass not more than 0,61 kg
SENSORS AND TRANSDUCERS
Transducers
Space industry
Transducers
SENSORS AND TRANSDUCERS
ПСТД (PSTD)
SPECIFICATIONVALUE
Maximal frequency range, Hz 0 – 1000Tolerance, %, not more than 0,5Supply voltage, V 28Output signal range, V 0 .. 6Operating temperature range, C –50 .. +50Current consumption, mA, no more than 110Number of channels 4Resource time, hours 500Weight, kg 0,61Number of variants (depends on frequency range)
7
СИП (SIP) Displacement measuring system СИП is assigned for conversion of a contactless measured axial clearance of a shaft to a standard electric signal for the emergency shutdown system.
СИП consists of inductive- transformer sensor of linear displacements and of amplifying and converting block, that are connected by a jumper cable of length 5000 mm.
SPECIFICATION VALUE
Measuring range 0,1-2,8 мм
Basic error not more than ±2%
Initial output signal 0,25±0,25 В
Supply current 27(+7,-3)В
Consumption current not more than 100 мА
Working temperature range : - for the inductive sensor - for the converter
from -100 till +500Сfrom -50 till +500С
Mass not more than 1,5 kg
Nominal output signal 6 В
Nonlinearity of calibration characteristic: - in whole rangeв - in the portion from 0,1 till 2,2 мmm
not more than ±15%not more than ±12%
Vibration accelerations: - for the inductive sensor - for the converter
up to 1500 m/s2
up to 400 m/s2
SENSORS AND TRANSDUCERS
Transducers
Space industry
Тритон-7008
SPECIFICATION VALUE
not more than 1 kg
Measuring voltage range 0,6-1,15 V
Supply voltage 27(+5,-4) VDC
Current consumption not more than 250 mA
Mass
Transducer is designed for conversion of signals from semiconductor temperature sensors into input signals for control systems (i.g. Ит2000).
FEATURES: continuity test of measuring sensors; operational integrity under destabilizing factors exposure; high reliability; synchronous and autonomous modes
Quantity of sensor channels 8 channels
Working temperature range from -40 till +50 0С
Sensor supply current 100±0,1 A
Measuring accuracy not more than 0,16%
Output signal 16 bit parallel binary code, pulse duration 10 ms (20 ± 2; 40 ± 4) ms;- Sequential 20 position digit code;Logical «0» level – (0 –1) V, logical «1» level – (4 – 5) V
SENSORS AND TRANSDUCERS
Transducers
Space industry
3D200
The transducer of linear and angular displacements of pipelines 3D200.It is assigned for measuring of linear and angular displacements (in perpendicular planes) of technological equipment (pipelines) and their transformation into electrical signal that is proportional to displacements.It is used in power plant equipment.
SPECIFICATION VALUE
Basic error: - linear displacements - angular displacements
not more than 1,5%not more than 2%
Measuring range: - linear displacements - angular displacements
0-220 mm±700
Mechanical connection with the unit under measurement Metal wire rope Ø 0,65 mm
Overall dimensions 217 х 234 х 139 мм
Mounting dimensions 4 slots 6,460 mm (axle base is 191 mm)
Supply voltage 6±1 V, DC
Mass of the transducer not more than 5,8 кг
SENSORS AND TRANSDUCERS
Transducers
Power plant industry
Transducers
SENSORS AND TRANSDUCERS
LIMITED LIABILITY COMPANY"SENSOR ENTERPRISE "ZAVOD RAPID“
25, Odintsova str.,Chernigov Ukraine 14030
phone (+38 04622)3-23-49, fax (+38 04622)3-16-12
website: www.rapid.cn.uae-mail: rapid@mail.cn.ua
top related