spreader bar.doc
Post on 07-Jul-2016
350 Views
Preview:
TRANSCRIPT
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PROSEDURE
PEMERIKSAAN DAN PENGUJIAN
SPREADER BAR
PT. PRIMATAMA INDOTEKNIKJl. Barata Jaya I No. 53, Surabaya
Telp. ( 031 ) 5053954, 71139728 Facs. ( 031 ) 5053954E-mail : PRIMATEK_SBY@yahoo.com
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
REKAPITULASI AMANDEMEN
Nomor Tanggal Uraian
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
SPREADER BAR
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
DAFTAR ISI
1. Tujuan
2. Ruang Lingkup
3. Referensi
4. Personil
5. Keselamatan Kerja
6. Inspection
6.1. Pengukuran Dimensi
6.2. Visual Inspection
7. Non Destructive Test
8. Kreteria Pemusnahan
9. Proof Load Test
10. Penandaan dan Pewarnaan
11. Penyimpanan
12. Reportingo Lampiran I.a : Form Laporan Periodic Inspection of Spreader Bars
o Lampiran I.b :Form Laporan Periodic Inspection and Testing of Spreader Bars
o Lampiran II.a : Form Certificate Periodic inspection of Spreader Bars
o Lampiran II.b: Form Certificate Periodic Inspection and Testing of
Spreader Bars
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
1. Tujuan :Prosedur ini bertujuan sebagai petunjuk untuk melakukan pariodic inspection dan inspection and Testing Spreader bars,yang digunakan untuk pengangkatan / perentang Sling.
2. Ruang Lingkup:Prosedur ini berlaku untuk Inspection Spreader Bars secara periodic setiap enam bulan dan inspection and testing dilakukan secara periodic setiap satu tahun.
3. Referensi:
ANSI/ASME B30.20 Below-the-Hook Lifting Devices. Lifting Equipment Lifting Operation Procedure No 900-PRC-HS-2235 GP 32-49 Section 7, Guidance on Practice for In Service
Inspection and Testing of Special and Other Equipment.
4. Personil :Personil yang melakukan periodic inspection and Testing Spreader Bars harus mempunyai kompetensi sebagai Inspector Lifting Gear dari lembaga yang berwenang dan telah mengikuti Certification TC 135 - Authorized Loose Lifting Equipment Inspector.
5. Keselamatan KerjaSetiap personil yang melakukan inspection dan testing harus memahami dan mematuhi Lifting Equipment Lifting Operations Procedure Doc.No.900-PRC-HS-2235, Semua loose lifting equipment yang akan di inspection di tempatkan dengan luasan yang sesuai mudah dan aman, pasang baricade di area kerja,pada saat melakukan Inspection dan Testing. Personil yang melakukan inspection dan testing harus menggunakan PPE yang standard, sedangkan untuk melakukan applikasi NDT atau menggunakan bahan kimia berbahaya harus menggunakan sarung tangan karet dan masker.
6. Inspection :Sebelum melakukan inspeksi/pemeriksaan, Isnpector harus mereview data dan dokumen peralatan / manual Jack (Spec. dan Sertifikat dari pabrik pembuat )Pengeluaran dan pengambilan Loose Lifting Equipment dari Rigging Loft,harus mengacu pada control of Loose Lifting Equipment. 6.1. Pengukurun DimensiPengukuran dilakukan untuk mengetehui actual spesifikasi dari pabrik pembuat dan untuk mengidentifikasi keausan dan kelainan.
6.2. Visual Inspection :Visual Inspection dilakukan untuk melihat adanya kerusakan dan kelainan pada peralatan:
Visual Inspection pada Steel Wire Rope, periksa jumlah kawat putus pada satu strand dan pada satu pintalan / lay, keausan dan kerusakan lainnya.
Visual Inspection pada Lifting Lugs/point,periksa keausan, perubahan bentuk, terpelintir, retak, korosi.
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
Visual Inspection pada Twist Lock, periksa perubahan bentuk,cacat /retak,korosi, keausan. Visual Inspection pada Bars/Beam, Periksa cacat/retak, perubahan bentuk, korosi,
sambungan-sambungan/Weld Joint. Visual Inspection pada Identifikasi dari manufacture / Name Plate,No.
serie,Model,Size,Kapasitas.
6.3. NDT (Non Distructive Test) Non Distructive Test mengunakan Wire Rope Tester untuk mengetahui kerusakan/kelainan
pada bagian dalam Steel Wire Rope dan Core. Dye Penetrant Test atau Magnetic Particle untuk mengetahui adanya cacat / keretakan pada
sambungan / Weld Joint.
7. Repair dan ServiceRepair /perbaikan dilakukan sebelum peralatan digunakan atau di Load Test.Temuan/rekomendasi dari hasil Inspeksi/pemeriksaan harus dilakukan perbaikan/pergantian sesuai anjuran pabrik pembuat/manual instruction dan sesuai spesifikasi, dan Inspector harus melakukan check ulang mengacu ke procedure 6.2,6.3 dan dinyatakan baik
8. Proof Test :Pengujian dilakukan sekali setahun dengan memberikan pembebanan pada Spreader Bars maksimum dari peralatan dan dilakukan pengamatan pada bagian critical, dan setelah beban dihilangkan.Selanjutnya dilakukan pemeriksaan dengan acuan procedur 6.2, dan 6.3
9. Penandaan dan Pewarnaan Spreader Bars dinyatakan laik pakai untuk digunakan akan diberi kode warna Biru, Hijau , Kuning secara bergiliran dengan jangka waktu 6 bulan sesuai procedur number………………..Selain itu akan diberi tanda (tag) dan dipasang pasa body,isian pada tagging adalah :
Tag/Serial No :SWL :Date :Exp :
Apabila Spreader Bars tidak Laik pakai (rejected) akan diberi warna / color PUTIH dan diberi tag DO NOT USE, selanjutnya dimusnahkan.
10. Penyimpanan Spreader Bars yang telah di inspection and testing disimpan di rigging loft……………Dan mengacu pada control of loose lifting equipment document number :……………..
11. ReportingLaporan Periodic Inspection 6 bulan atau Inspection and Testing 1 Tahun,akan dibuat dan ditandatangi oleh Loose Lifting Equipment Inspector yang melakukan pemeriksaan dan diketahui oleh Supervisor Lifiting,Laporan Periodic Inspection form lampiran(Ia) dan inspection and Testing Form Lampiran (I.b).Sertifikat Periodic Inspection akan ditandatangi oleh Authorized Loose Lifting Equipment Inspector, form Sertifikat Periodic Inspection and Testing lampiran (II.b).Laporan tersebut defile dalam satu bantex folder dan disimpan di Maintenance Departement.
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
Lampiran I.a
Periodic Inspection ReportSpreader Bars
Serial No. Report No.SWL Color CodeBrand /Model LocationManufacture Date Inspection Applicable Code Certificate of manufacture
Inspection RecordInspection Item Checked Condition Remarks
Beam / Bar
Wear Good Repair ReplaceCorrosionWeld, Bent, twisted, distortionCrack,
Lifting Lugs
WearCorrosionWeld, Bolt, NutsBent, Twisted, DistortedDamage, Cracked
Twist locks/Hook
WearCorrosionWeld, Bolt, NutsBent, Twisted, DistortedDamage, Cracked
Wire ropeWearBent, Twisted, DistortedDamage, cracked
Recommendation
Next Inspection
Review/Witness Approved Authorized Loose LiftingEquipment Inspector
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
Date Time: Date : Time: Date: Time:
Lampiran I.b
Periodic Inspection and Testing ReportSpreader Bars
Serial No. Report No.SWL Color CodeBrand /Model LocationManufacture Date Inspection Applicable Code Certificate of manufacture
Inspection RecordInspection Item Checked Condition Remarks
Beam / Bar
Wear Good Repair ReplaceCorrosionWeld, Bent, twisted, distortionCrack,
Lifting Lugs
WearCorrosionWeld, Bolt, NutsBent, Twisted, DistortedDamage, Cracked
Twist locks/Hook
WearCorrosionWeld, Bolt, NutsBent, Twisted, DistortedDamage, Cracked
Wire ropeWearBent, Twisted, DistortedDamage, cracked
Proof Load TestSWL (tons) Load Test (tons) % of SWL Holding Time Result
Recommendation
Next Inspection
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
Review/Witness Approved Authorized Loose LiftingEquipment Inspector
Date Time: Date : Time: Date: Time:
LAMPIRAN II.a
CERTIFICATE Periodic Inspection of Spreader Bars
No. :
The Periodic Inspection of Spreader Bars has been conducted:
Date of Inspection :
Serial No. :
Length :
Rope Diameter :
Construction :
Configuration
SWL :
Manufacture :
Reference Inspection as per Procedure:
ASME B30.20 Below –the - hook lifting devices GP 32-49 Section 7, Guidance on Practice for In Service Inspection and Testing of Special and
Other Equipment Lifting Equipment and Lifting Operation Procedure Doc. No. : 900-PRC-HS-2335
The Periodic Inspection result of Spreader bar is acceptable to service.
Valid Until :
, Authorized Loose Lifting Equipment Inspector
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
LAMPIRAN II.a
CERTIFICATE Periodic Inspection of Spreader Bars
No. :
The Periodic Inspection and Testing of Spreader Bars has been conducted:
Date of Inspection :
Serial No. :
Length :
Rope Diameter :
Construction :
Configuration
SWL :
Manufacture :
Proof Load Test :
SWL ( ton) Test Load (Ton) % of SWL Holding time Result
Reference Inspection as per Procedure:
ASME B30.20 Below –the - hook lifting devices GP 32-49 Section 7, Guidance on Practice for In Service Inspection and Testing of Special and
Other Equipment Lifting Equipment and Lifting Operation Procedure Doc. No. : 900-PRC-HS-2335
The Periodic Inspection and testing result of Spreader bar is acceptable to service.
Valid Until :
Authorized Loose Lifting Equipment Inspector
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
PT. PRIMATAMA INDOTEKNIK Spreader Bar Procedure
Rev : 05 – Primatek Doc : 29 - PrimatekDoe : 01/06/2011
top related