static control material and systems · it is able to attain various monitoring requirements to...
Post on 13-Aug-2020
1 Views
Preview:
TRANSCRIPT
STATIC CONTROL MATERIAL AND SYSTEMS 2020 / 2021
ASC (Advanced Static Control)
#304, 3F, Daesung Bldg, 6, Dongback 4-ro, Giheung-gu, Yongin-si, Gyeonggi-do, 17006, Korea
E-mail: asc0717@naver.com Blog: http://blog.naver.com/ascglobal
Tel: 070-4624-4780 Fax: 031-281-4780
에이에스씨의 비전은 회사 사명과 같이 사전 정전기 관리(Advanced Static Control)를 선도해 가는 ESD
전문 기업입니다.
에이에스씨는 20년 이상 반도체, 자동차, 전기 전자 등 첨단 산업 분야에서 ESD와 관련된 다양한 경험과
ESD에 대한 체계적인 교육 훈련을 통한 지식을 기반으로, 문제의 핵심에 대한 이해와 최적의 ESD 제어 솔
루션을 제공함으로써, 고객사의 성공 비즈니스를 돕고 있습니다.
최근 전기 전자뿐만 아니라 방산 및 화학 산업 분야에서 ESD 문제는 기업의 생산 수율 향상과 제품의 신
뢰도를 확보하는 품질경영 전략에 있어 대단히 중요한 요소가 되었습니다. 특히 자동차 전장 분야의 경우
스마트 카, 전기 자동차 및 무인 자동차로 진화하면서 전장 부품의 비중이 점점 커지고 있어 자동차 OEM
에서 ESD에 대한 관심과 요구가 커지고 있습니다.
따라서 기본적으로 높은 수준의 ESD 제어가 요구되는 기업에서는 국제 표준인 IEC-61340-5-1 및
ANSI/ESD S20.20의 문서를 참고하여 작성된 체계적이고 정교한 ESD 제어 프로그램이 필요합니다.
이러한 ESD 제어 프로그램은 관리적인 요구 사항과 기술적인 요구 사항을 포함하며, 제품 평가와
준수 검증을 정기적으로 수행하도록 제안하고 있습니다.
에이에스씨는 ESD 기초에 대한 교육 훈련과 실습, 국제 표준 교육, 라인 진단 서비스 및 제품 평가
(Product Qualification)과 같은 기술 서비스를 제공할 뿐 아니라, 국제기준인 IEC 61340-5-1 ESD Facility
Certification 인증을 위한 솔루션 그리고 정전기 측정기, 진단 분석 시스템, 정전기 제거용 이오나이저,
정전 분산형 제전 비닐 및 Air bag 등 다양한 ESD 제어 솔루션을 제공하고 있습니다.
Kleinwächter GmbH 소개
독일 Kleinwächter는 세계 ESD 분야에서 측정장비를 선도해가는 설계 및 제조업체입니다.
대부분의 측정장비는 open fieldmill 원칙에 기반을 두고 있으며, Dr-ing 교수를 통해 Schwenkhagen 원리
를 발전시켰습니다. Hans Kleinwächter 교수는 1974년 라이프치히 (Leipzig)의 최고 과학기술 측정 기관의
금메달을 받았으며, 1981년 Kleinwächter GmbH를 설립하였습니다.
Kleinwächter는 유럽의 ESD 업체들에게 ODM(제조업자 개발생산) 방식으로 표면저항측정기, 정전기측정
기, 이오나이저측정기, 인체전위측정기 등을 공급하는 원천기술을 보유한 글로벌 기업입니다.
취급 브랜드
Kleinwächter(독일), DPV(독일), Wolfgang(독일), MEGALIN(대만), SURPA(중국), 선재하이테크(한국) 등
에이에스씨 (Advanced Static Control)
CONTENTS
Advanced Static Control 2
Wrist Strap Tester, Wrist Strap Monitor, Ground Cord 5
Personal Grounding, Grounding Accessories 6 - 7
Test and Measurement 8 - 20
Ionizer 21 - 23
Packing Material, EPA Material, Cleanroom Material 24 - 30
ANSI/ESD S20.20 - 2014 31 - 36
The SURPA-181 is a precise device to perform on demand
testing of all standard & conventional single conductor Wrist
Grounding Straps for proper skin resistance, and the built-in
safety resistor.
Specifications
Lo- Fail (Constant Red LED indicator) <800KΩ
Pass (Green LED & Continues Audible indicator) 800KΩ to
10MΩ
Hi Fail (Constant Red LED Indicator) > 10MΩ
Accuracy +/- 5%
Low Battery set at 6.5 Volts (Red LED indicator)
Dimensions 2-3/8”x3-3/4”x1” (60mm x 95mm x 252mm)
Weight with 9V Battery 42.5 oz (120 g)
Test Voltage 9VDC
The SURPA 518-1 is a small & precise device for constant
monitoring of standard single conductor wrist grounding straps,
with audible & visible alarm features.
Specifications
* On/Off Switch on the front panel
* When powered up & at the On position, Constantly Monitors
the Wrist Strap for Skin Contact, 1 Meg Resistor, & Ground
Connection
* LED Indicator on the front panel
a. Green for Pass
b. Red for Fail
* Wrist Strap Receptacle on the front panel
* 6V DC Receptacle on the back panel
The S1045 is a space-saving grounding block designed to
provide direct path to ground in ESD Benches & Workstations
for two operators/users.
S1040 Series is a Floor Mat/Runner Grounding 15' long
straight Cord. It is constructed with specially designed hooded
molded plastic termination with a 3/8" (10mm) Female Socket
or Male Stud, and a 1 Megohm current limiting safety resistor
at one end, and a soldered # 10 Ring Terminal at the other end.
Bonding Plug EBP-0011, 0013, 0014
1 Meg resistor inside
Part Nr.
S1045 Grounding Block for Workbenches
S1040 Floor Mat Grounding Cord (3M, 4.5M)
Part Nr.
EBP-0011 3 x banana jack
EBP-0013 1 x 10mm stud, 2 x banana jack
EBP-0014 2 x 10mm stud, 1 x 4mm plug
Part Nr.
SURPA-181 Wrist Strap Tester
Part Nr.
SURPA-518-1 One wrist strap on-line monitor
SURPA-518-2 Two wrist strap on-line monitor
Wrist Strap Tester Wrist Strap Monitor
Ground PlugGround Cord
S1045 S1040
EBP-0013EBP-0011
EBP-0014
Application
GZ-160x is
an extremely flexible, economical, continuous monitor series specifically designed for those price-sensitive customers.
It is based on a unique, accurate, low-voltage, resistive loop detection technology and precision SMT manufacturing.
It is able to attain various monitoring requirements to fulfill your strong need to meet all kinds of challenges.
Features:
Able to monitor operator, ESD mat and machine ground.
Wrist-strap alarm: 35M/1.8MΩ, Table MAT alarm: 100MΩ, Machine alarm: 10Ω.
3-color LED to indicate status of operator wrist-strap: High, Low, Safe, Idle.
Audio and LED will give alarms when monitor detects problems on grounding.
Audio alarm volume is user adjustable with maximum of 85dB typical.
Normal voltage when wearing wrist-strap is 100mV. Open wrist-strap: 0.9V.
Maximum mat voltage:900mV.
Maximum machine voltage and current (Hard Grounding):50mV, 0.2mA.
Human body voltage filtration.
OPC(Operater Presence Sensor) protects ESD safe workstations
by sensing when an operator is within the protected work area and
alarms if a wrist strap is not connected.
The alarm continues until compliance is achieved,
preventing isolated operators from damaging ESD sensitive devices.
Part Nr.
GZ-1601 OP, include x1 Remote Terminal Box
GZ-1602 OP+MAT, include x1 Remote Terminal Box
GZ-1603 OP+MAT+TOOL, nclude x1 Remote Terminal Box
GZ-1604 OP+TOOL, nclude x1 Remote Terminal Box
GZ-REMOTE-IR Remote IR Sensor Connection Jack Box (each)
Single Workstation Monitor
WY-300 Network Dual Workstation Monitor
In a modern work environment, proper ESD grounding is crucial to assure product high quality and reliability. When the
control environment is very sensitive, then a loose or open grounding wire may cause serious damages to the sensitive parts in
the product.
WY-300 is low-price high-function dual workstation ESD monitor. It is able to monitor 2 independent wrist-straps and 2 ESD
table mats. The real-time status is displayed at the 3-color LED on the front panel.
Using the built-in special circuit in each WY-300, multiple WY-300 units can be interconnected into a network. A central
management program on PC will communicate to the WY-300 network through a router to collect overall monitor status and log
the data into a database.
WY-300 contains a built-in interface that allows you to connect the wrist-strap alarms to external devices such as industrial-
grade siren to perform further enhanced control.
Key Features:
Built-in networking circuit
Continuously monitor 2 independent wrist-straps and 2 ESD table mats
Selectable alarm limit range for Mat:
10MΩ ~ 1000MΩ, Menu selection
Each alarm item can be Enabled or Disabled
Built-in external interface to siren
Standby indicator: when power is on without wrist-strap plugged in
Typical capacitor tests: pass 122pF, fail 75pF
WY-200 Dual Workstation Monitor
WY-200 is a multi-feature continuous monitor. It is a dual workstation ESD monitor designed specifically for price-sensitive users.
The personnel capacitance to earth is used during monitoring. The unit is made with reliable SMT technology with solid housing. It
is able to simultaneously monitor the ESD grounding of 2 traditional single-wire wrist-straps and 2 ESD table mats.
Key Features:
Simultaneously monitor 2 traditional wrist-straps and 2 ESD table mats.
LED and audio indicators for wrist-strap and ESD mat grounding status.
Stand-by indicator: Power is on but wrist-strap is not plugged in.
Alarm audio sound volume is adjustable.
Operator sensitivity is adjustable.
ESD mat resistance limit: 100MΩ ± 10%
Wrist-strap alarms can be connected to external industrial grade siren.
Dimension (W×H×L): 4×1×3 inch (10×2.5×7.5 cm)
Typical capacitor tests: pass 122pF, fail 75pF
Applications:
Electronics Assembly/ Medical Equipment/ Aerospace/ Military/ Semi-con/ Any ESD sensitive areas
Part Nr.
WY-200 Dual Workstation Monitor
WY-300 Network Dual Workstation Monitor
Dual Workstation Monitor
GZ-1800 is a proactive ESD grounding monitor for operator / workstation with highest flexibility and performance specifications in
the industry. This ultimate digital device provides complete protection to two operators by monitoring both resistance and voltage
independently using dual wire wrist strap. GZ-1800 monitor meets ULV (ultra low voltage) requirement for safety and green energy
for induced operator and work-station voltage. It also monitors ESD mat ground and low resistance of tool chassis ground
simultaneously. Very easy to use with standard default settings.
The user can also set the new alarm limits and OPC (operator presence check) via an optional dedicate PC software. Using an
optional digital display module, the results measured can be viewed on-site and a set of external control interface are provided
Specifications:
Applications:
Hard drive manufacturing / GMR head testing / Electronics assembly / Aerospace / Military / Semiconductor Fabrication / Any
static sensitive assembly and test environment
GZ-1800 Network Workstation Monitor
Part Nr.
GZ-1800 Proactive ULV ESD Workstation Monitor
GZ-1800-D Display Module for GZ-1800
GZ-1800-H Network Router for GZ-1800
GZ-1800-SEE Hardware Management Software for GZ-1800
GZ-1800-IMS Intergrated Management Software for GZ-1800 Network
GZ-REMOTE-IR Remote IR Sensor Connection Box for OPC (operator presence check)
In a modern electronic facility, proper grounding is crucial for safe and uninterrupted operation of equipment. Especially when the
control environments are critical, any broken or lose ground connections may result in personnel exposure to dangerous voltage,
equipment malfunction, and damages to those ESD sensitive components. The GZ-1980 grounding monitor is a digital precision
instrument designed to formulate a network for monitoring of the grounding on industrial equipment with multiple grounding points.
Up to eight low resistance grounds can be monitored by one GZ-1980. The high resistance limit can be set through software. The
real-time status is displayed on the front panel using bicolor LED’s. With the built-in network circuitry within each GZ-1980, multiple
GZ-1980 units can be easily inter-connected to become a network that can be controlled from a PC-based management program.
All the alarm records with detailed data in the monitor network can be logged in a database. Each GZ-1980 provides interface to
external devices such as a siren or other controllers that may provide more delicate control based on the monitoring status.
Specifications:
Ground resistance alam limit: 10Ω +/- 10% (Selectable 1Ω~20Ω)
Ground sense current: 0.2 mA +/- 10%
Maximum open ground voltage: 100 mV under “open ground” conditions.
Power supply: 7-15V DC 150 mA, 2.1mm coax plug, center positive.
Mechanical Specifications:
Dimensions (W x H x L): 4 x 1 x 3 inches (100 x 25 x 75 mm)
Monitor Case Material: Stainless steel
Applications:
Satellite and Aerospace productions Wafer Handling and Photolithography Equipment Equipment Clusters for IC Test
and Packaging GMR Head Test and Packaging Semiconductors Productions Wherever ESD and grounding are an
Issue
Applications Example: Monitoring of Assembly Cluster Equipment
Many assembly machines consist of several parts which are not always grounded. Their ground connections may also be broken
during maintenance, modifications, and even in normal use. GZ-1980 can simultaneously monitor the ground connection of every
single part of the entire tool to assure its compliance with the standards and its uninterrupted operation. GZ-1980 provides external
relay for equipment to stop in case of ground failures.
GZ-1980 Digital Equipment Ground Monitor
Part Nr.
GZ-1980 Digital Equipment Ground Monitor
GZ-1980-H Digital Equipment Ground Router
GZ-1980 -SEE Hardware Management Program
GZ-1980-IMS Intergrated Management Software
EQ-3000-SIREN2 External Siren
The Footworks is a wrist strap and footwear tester for access control of ESD protected areas (EPA-s)
The test result is indicated with LCD display. Test results can be exported from the Tester over RS485.
A relay with a dry contact provides the connection to a door opening system
Real-time ESD-testing with personnel identification, access control and central data maintenance.
• Existing identity cards / time attendance cards can be reused
• Can be integrated into existing infrastructure
• Can be save the test data in SD Card
• Can be combined with existing access systems
• Tester stations can be networked
• Customer systems can be connected via open database interface
• Measurement data is display to process after one seconds
• Power supply: External power supply unit
• Separate measurement of left and right shoe.
• The unit can be used on bench tops or as a wall mounted unit
• Adjustable limits through LCD panel (Touch Screen)
• Working Temperature Humidity -10 ~ 70, 60% RH
Include: Tester, dual electrode, user´s manual, Calibration Certificate, 12V~30VDC power supply
Sample application
Part Nr.
Footworks Basic Footworks with testing electrode and RS485-interface
Footworks Stand Footworks with testing electrode and RS485-interface, W34cm×D42cm×H103cm
Footworks Gate Combination with existing access system is possible (turnstile / flip type)
Software Package Data collection and display on monitor(date/time of measurment, name, test result., etc.)
EM Lock Module Door open Close
Digital Footware & Wrist Strap Tester
Footworks Basic Footworks Stand Footworks Gate Software Package
The Personnel Grounding Tester PGT120 is a wrist strap and footwear tester for access control of ESD protected areas (EPA-s)
The test result is indicated with audible and visual signals. A relay with a dry contact provides the connection to a door opening
system
Special version, PGT120.COM with RS232-interface for
connection to time and attendance systems
Test results can be exported from the PGT120 over RS232
The test result is indicated with audible and visual signals.
A relay with a dry contact provides the connection to
a door opening system
Real-time ESD-testing with personnel identification,
access control and central data maintenance.
• Existing identity cards / time attendance cards can be reused
• Can be integrated into existing infrastructure
• Can be combined with existing access systems
• Other PGT120.COM stations can be networked
• Different databases can be used
• Customer systems can be connected via open database interface
• Measurement data is ready to process after a few seconds
• Secure and coded network communication
Power supply: External power supply unit
Separate measurement of left and right shoe. Lower limit disabling is possible
Wrist strap, right and left shoe testing is simultaneously possible by separate measuring circuits
In combination with a barrier gate, the footwear measurement can be performed in series without pressing a button
(hands-free mode).
The unit can be used on bench tops or as a wall mounted unit (Wall mounting requires an additional wall mounting plate)
Adjustable limits through dip switches
Include: PGT120, dual electrode, user´s manual in English, Calibration Certificate, 9 volt battery, 230 VAC power supply
Part Nr.
PGT120 Personal Grounding Tester PGT120 with testing electrode
PGT120.COM Personal Grounding Tester PGT120 with testing electrode and RS232-interface
PGT120.SM Mat for footwear electrode with yellow beveled edges
PGT120.WK Wall mounting plate for PGT120 and PGT120.COM
PGT120.WK.H Holder for PGT120
1801.G.P.TERM Steel Post
Personal Grounding Tester PGT120 & PGT120.COM
Sample applicationSteel Post For PGT120 With Holder
The values can be read out trough the PC-Interface at all times.
PC software interface included on CD-ROM : all results can be exported to Microsoft Excel
This surface resistance meter measures high resistance up to 2 Tera-Ohm (2x10e12Ω) and registers at the same time humidity
and air temperature values.
Specifications:
Dimensions: 200x100x40 mm
Weight: 380 grams (excluding batteries and electrodes)
Power supply: 4xAA batteries with permanent control for 10 hours use.
Supplemented with a 9V DC/300mA supply device
Display: Alphanumeric display: 2 lines of 16 letters
Measure range:
Resistance: From 2x10e4Ω to 2x10e12Ω
Measure voltage: 10V for voltage < 2x10e5Ω / 100V for voltage > 2x10e5Ω / Auto
Features and advantages:
Suitable for mobile use with compact housing and rechargeable batteries.
Operates friendly: only 2 buttons required to use it.
Measures resistance, temperature & humidity at the same time.
Suitable for mobile use with compact housing and rechargeable batteries.
Electrodes compliant with EOS-ESD 4.1/6.1, Tester compliant with IEC 61340-5-1
Including:
TERA Ohm meter (incl. 4 rechargeable A4 batteries), 1 measurement cord 1 m & 5 m, 2,27 kg pair of electrodes,
available separately, Power supply, CR-ROM with PC interface, Serial PC cable,
Conductive suitcase with foam inserts, Operating instructions and calibration certificate
TERA Ohmmeter TOM600 ME
Part Nr.
TOM600 TERA Ohm Meter TOM600 without 2.27Kg pair of electrodes
TOM600 ME TERA Ohm Meter TOM600 ME with 2.27Kg pair of electrodes
Sample application
The values can be read out trough the PC-Interface at all times.
PC software interface included on CD-ROM : all results can be exported to Microsoft Excel
Due to its compact design and battery powered operation the TOM 610 is suited for mobile applications in industrial areas.
It also can be operated stationary with the provided wall power supply.
Specifications:
Measure range:
Resistance: 1x10e3Ω to 1x10e13Ω, accuracy ±10%
Measure voltage: 10V, 100V, 500V, 1000V, Auto
The TERA – Ohm Meter TOM 6100 measures resistances in function of the selected measure voltage.
Features and advantages:
As a new world innovation, we measure the „Break-Down“ Resistor and Voltage and also the „Break-OFF“ - Time if it happens.
Suitable for mobile use with compact housing and rechargeable batteries.
The menu-driven TOM 610 is operated by only 2 pushbuttons and its touch display and therefore very user-friendly.
All set measurement parameters are shown in the display for a better orientation.
Measures resistance, temperature & humidity at the same time.
The measured data including environment parameters, can be stored in an internal memory (up to 200 records).
The measurement time required by norms, like DIN EN 61340 or EOS-ESD 4.1/6.1, can be set with an internal timer.
Including:
• TERA ohmmeter TOM610 with temperature and humidity sensor • 4 x. NiMH batteries (AA) • Conductive carrying case with
foam insert • Wall power supply 9V-DC / 500mA • 2 x teflonized measurement line (1m ) • USB to USB mini cable • USB Stick
with PC software and manuals • Declaration of factory calibration • Pair of 2,25 kg electrodes according to IEC 61340-4-1,
IEC61340-2-3
TERA Ohmmeter TOM610 ME
Part Nr.
TOM610 TERA Ohm Meter TOM600 without 2.27Kg pair of electrodes
TOM610 ME TERA Ohm Meter TOM600 ME with 2.27Kg pair of electrodes
The METRISO-B530 is an ESD Test Kit. This kit is designed with a wide Resistance Range (1 kOhm - 199 Gohm) and is suitable
for Point-to-Point (RTT), Surface and Resistance-to-Ground (RTG) measurements. The METRISO-B530 Test Kit includes a digital
high resistance test meter, two disc probes, an extension handle (for floor measurements), a hand-held probe (w/ connecting cable)
and a conductive carrying case fitted with dissipative (pink) foam. The METRISO-B530 complies with industry standards and can
perform all ESD measurements in accordance with ANSI/ESD S20.20, IEC 61340-4-1, IEC 61340-2-3 and IEC 61340-4-5
Standards.
METRISO-B530 Specs:
* Power Source: AA Batteries
* Test Voltage:
(Ohmic Voltage Range) - 1 mA = | = 1,3 mA
(High Ohmic Voltage Range) - DC 10v, 100v, 500v
* Ohmic Test Range
(Low): 1 - 10 kOhm;
(High): 1 kOhm - 199 GOhm
* Probes:
2x Model 870 (weight: 2,27 kg / ø 63,5 mm) with
conductive rubber (grey) and extension,
1x hand-held probe Model 45
METRISO-B530 TEST KIT
The METRISO-3000 is an ESD High Resistance Tester. This tester is designed to take quick and accurate ESD measurements up
to a TeraOhm. The METRISO-3000 is a complete test kit for resistance measurements of almost all parts of ESD protection.
This unit will measure a wide range of values (1 KilaOhm - 1.2 TeraOhm). The tester includes two 5 lb probes and has an
integrated temperature and humidity gauge. Voltage measuring can be set between 10-500 volts, which can also be verified if
desired. All measured values can be stored within the instrument and with the help of the included software, transferred to a PC
via a USB cable. Using this software measurements can be managed, stored and protocols can be printed.
The METRISO-3000 comes complete with the meter, a USB cable, "ETC" Software (On CD-Rom), temperature and humidity
sensor, two disc probes (Model 850), a hand-held probe (Model 45) and connection cables all together in a conductive carrying
case. User Manual provided in German, English & French.
*The METRISO-3000 can be used in combination with various probes including a Mini-Probe (7220.840.SET) for control of trays
and conveyer lines; Ring-Probe and Hand-Probe (7220.880.SET) for control of resistance to floors and
shoes.
METRISO-3000 Specs:
* Power Source: AA Battery
* Test Voltage: DC 10v, 100v, 500v
* Test Range Resistance: 1 kOhm - 1.2 TeraOhm
* Dimensions: 8.8" L x 5.11" W x 5.5" H (225x130x140mm)
* Probes:
2x Model 870 (weight: 2,27 kg / ø 63,5 mm) with
conductive rubber (grey) and extension,
1x hand-held probe Model 45
METRISO-3000 TEST KIT
Part Nr.
7100.3000.MK METRISO-3000 Test Kit. Surface Resistance Meter
Part Nr.
7100.B530.MK Metriso-B530 Test Kit. Surface Resistance Meter
• The resistance meter measures high resistance up to 2 Tera-Ohm (2x10e12Ω) and registers at the same time humidity and air
temperature values.
• Handheld, portable, digital electrostatic field meter, detects and Measures electrostatic fields.
• EFM023 with conductive base and the measuring head MK023
• By mounting the measuring head MK23 the EFM023 can be used for verification measurement of body voltage
(walking test) according to IEC 61340-4-5
• Measures the air ionizer efficiency and the offset voltage
• Measures the electrostatic decay time from ±1,000 volts to ±100 volts (standard setting)
Includes:
• TOM600 Surface Resistance Meter with 5Ib probe
• EFM023 Field Meter
• EFM022 CPS for ionizer Test
• EFM023 BGT for walking Test
• 2point Probe, Handheld Probe, Veri Box
• calibration certificate, English user’s manual
AUD 623 - ESD AUDIT KIT
Part Nr.
AUD 623 Audit.Kit The ESD-Audit-Kit includes instruments and equipment needed to perform ESD audits
according to IEC 61340-5-1 and for qualification / verification of ESD control elements.
Walking TestDecay Time
The ESD-Audit-Kit includes instruments and equipment needed to perform ESD audits according to IEC 61340-5-1 and
for qualification / verification of ESD control elements.
Applications:
Testing flooring systems acc. to IEC 61340-4-1 and to IEC 61340-4-5
Testing chairs, workstations, shelves, transport cars and automated handling equipment acc. IEC 61340-2-3
Testing packaging materials acc. to IEC 61340-2-3
Testing electrostatic fields
Testing the point-to-point resistance of garments acc. to IEC 61340-4-9
Evaluating temperature and relative humidity
Evaluating Ionizers acc. to IEC 61340-4-7
ESD AUDIT KIT
Part Nr. Includes : 7110.B530.SET
(20 Kg)7110.600.SET
(20 Kg)
7110.600 Aluminium case
7110.B530.G High Resistance Meter Metriso-530B with connecting cables
7100.3000.G High Resistance Meter Metriso-3000 with connecting cables
7100.3000.TF Temperature and humidity sensor Metriso-3000
7100.TF530 Thermo-Hygrometer TF-530
7220.45 Handheld probe model 45
7220.840 Two-Point-Probe model 840 (Mini Probe)
7220.880 Ring probe model 880
7100.SRM110 Surface Resistance Meter SRM 110
7100.EFM51.CPS Electrostatic Field Meter with charged plate set
7220.850 Probe model 850 (2 probes)
7220.870 Probe model 870 (2 probes)
7220.870.V.SET Extension rod for Probe model 870 (3 pcs.)
2200.110 Grounding plug
7110.E8 8-socket grounding box
7100.2000.TR50 Cable reel, 50m
7100.PGT100.102Metal plate 400 X 300 X 2mm including 10mm snap with 4mm banana plug adapter
7220.880.6 Insulative plate 120 X 120 X 6mm
7220.880.9 Probe made of stainless steel, Ø 120 mm
7220.880.L Guard cord, blue, 1,5m
7100.B530.SET 7100.600.SET
Pocket size surface resistance meter with LCD display.
Include conductive carrying case, grounding cord, USB-Cable,
calibration certification and software for reading the saved data.
• Dimensions: 158x95x35 mm
• Weight: 350 grams (SRM01 only)
• Power supply: 12~25VDC
• Test range: 10KΩ~2TΩ (1.00×10^3 ~ 2.00×10^12 ohm)
• Test Accuracy : ±10%
• Test voltage: DC 10V, 100V
• Display: LCD Display, 16 * 2 Character
• with memory and USB connection to PC
• 2 external probes connection possible
Pocket size, lightweight, surface resistance meter,
Includes carrying bag, grounding cord and calibration certificate.
• Test range: 103 - 1012 ohm
• Test voltage: Open circuit voltage 100V
• Operation: 9V Battery operated
• Display: 12 LED display
• Probe: Built-in metal electrodes
(2 external probe connection possible)
Pocket size surface resistance meter with LCD display.
Include conductive carrying case, grounding cord, USB-Cable,
calibration certification and software for reading the saved data.
• Integrated temperature and humidity sensor
• Test range: 103 - 1012 ohm
• Test voltage: Open circuit voltage 100V
(switches automatically above > 1Mohm)
• Display: LCD Display
• Probes: Built-in electrodes with conductive rubber
• with memory and USB connection to PC
• 2 external probes connection possible
Pocket size, lightweight, surface resistance meter,
Includes carrying bag, grounding cord and calibration certificate.
• Test range: 103 - 1012 ohm
• Test voltage: Open circuit voltage 100V
• Operation: 9V Battery operated
• Display: 12 LED display
• Probe: Built-in metal electrodes
(2 external probe connection possible)
Part Nr.
SRM110 Surface Resistance Meter SRM110
Part Nr.
SRM200 Surface Resistance Meter SRM200
Built-in bar electrodes
Built-in bar electrodes
Part Nr.
MW-100 Surface Resistance Meter MW-100
Part Nr.
SURPA110 Surface Resistance Meter SURPA110
SRM200 SRM110
SURPA110Megaworks MW-100
Built-in bar electrodes
Handheld, portable, digital electrostatic field meter, detects and
Measures electrostatic fields.
The electrostatic field strength value (V/m) will be automatically
translated to the electrostatic potential (V) according to the
preset distance.
An additional field strength mode is also available.
• Test method: Rotating chopper
• Test range: 0V ± 200KV distance mode
• Display: LCD display
• Includes: EFM022, ground connection clip,
battery charger for 9V batteries,
spare 9V rechargeable battery,
calibration certificate,
English user’s manual
Part Nr.
EFM022/023 EFM022 with conductive carryingcase
EFM022.CPS.KIT Retrofit set - Charge Plate Setwithout EFM023
ELECTROSTATIC FIELD METER EFM022/023
For the stationary automatic measurement of field strength i.e. amount of static charge of material surfaces.
The Field Strength Sensor EFM115 is a very small but very accurate field strength sensor which supplies the results as analog
signals and thus can be used to record or control ionisers or processes in the production flow.
With the provided software EFM115_ReadOut the EFM 115 can be pursued directly in a PC etc. with „windows“ operating system.
Voltage measuring with the voltage head MK11
• Measurement distance typically 150 mm
• 4 measurment ranges up to 200 kV (5kV/m, 20kV/m, 50kV/m und 200kV/m)
• Power supply: 9-15 V DC
• Only 120 x Ø 36 mm in dimension
• Includes:
EFM 115, shield cap, USB – cable with Mini plug 1,5m, Spiral ground cable 2 m with alligator clip
CD with EFM115_ReadOut Software, Table tripod, ESD – case with foam, Manual, Calibration certification
FIELD STRENGH SENSOR EFM115
Part Nr.
EFM115 FIELD STRENGH SENSOR EFM115
Sample application
• Measures the air ionizer efficiency and the offset voltage
• Measures the electrostatic decay time from ±1,000 volts to
±100 volts (standard setting)
• Measures the (150 150 mm) plate potential with a built-in
electrostatic field meter
• Plate can be removed in order to apply the high voltage
head to the field meter
• Body voltage (walking test) according to IEC 61340-4-5
• High voltage head allows direct voltage measurement
of up to 2KV
• Size: 15.2 × 15.2 × 15.2 cm (W×H×D)
• Includes: Power supply 230 VAC, ground cord, conductive
case, user’s manual in English, calibration certificate
Complies with IEC 61340-4-7 and IEC 61340-4-5
CHARGED PLATE MONITOR - CPM374
Part Nr.
CPM374 Charged plate monitor CPM374
CPM374.HM High voltage head, including connecting cable
• Hand held instrument for measuring air ionizers
efficiency and offset voltage
• Measures the electrostatic decay time from
±1,000 volts to ±100 volts
• Measures the plate potential (75×150mm) with the attached
EFM022
• Suitable for measurement inside machines
• Dimensions: 150 × 125 × 75mm including Stand (W×H×D)
with base
Includes: EFM022, conductive carrying case, conductive base,
High voltage generator ±1200 Volts, charging plate,
ground connection clip, ground connection cable,
battery charger for 9V batteries, spare 9V
rechargeable battery,
calibration certificate, English user’s manual
EEM022 - CPS (CHARGED PLATE SET)
Part Nr.
EFM022.CPS Electrostatic field meter EFM022with charged plate set,“Peak” value mode for walking test
EFM022.WT.KIT Retrofit set - Walking Test Kitwithout EFM022
• EFM022 with conductive base and the measuring head
MK023
• By mounting the measuring head MK23 the EFM022 can be
used for verification measurement of body voltage
(walking test) according to IEC 61340-4-5
• The measuring head MK23 is specially calibrate for using
the EFM022
• The EFM022 shows the positive and negative “PEAK” value
of the measured body voltage.
Includes:
• EFM022 with measuring head MK023 in conductive
carrying case
• test lead and hand electrode
• conductive base, ground connection
• spare 9V rechargeable battery, battery charger for 9V
• calibration certificate, English user’s manual
EFM022 VMS - WALKING TEST SET
Part Nr.
EFM022.VMS EFM022 with carrying case, MK23,Base and connecting cable
EFM022.CPS.KIT Retrofit set - Charge Plate Setwithout EFM022
• EFM023 with conductive base and the measuring head
MK023
• By mounting the measuring head MK23 the EFM023 can be
used for verification measurement of body voltage
(walking test) according to IEC 61340-4-5
• The EFM023 shows the positive and negative “PEAK” value
of the measured body voltage.
• Walking test with UAD 110 on a PC
Includes:
• EFM023 with measuring head MK023 in conductive
carrying case, test lead and hand electrode
• conductive base, ground connection
• spare 9V rechargeable battery, battery charger for 9V
• Analog converter UAC 110, KL_Readout software
• Connecting cable BNC, USB Y-cable
• calibration certificate, English user’s manual
EFM023 BGT - WALKING TEST SET
Part Nr.
EFM023.BGT EFM023 with carrying case with walking test kit and software
Electrometer WT5000:
* Logarithmic LED-display with Peak hold for offline measurement
* Selectable measuring range 500V / 5000V
* Input resistance 1014
* Input capacitance < 5pF
* Output 5V
• Software to evaluate the Walking Test Graph
Includes:
• Electrometer WT5000
• Analog / digital converter (USB version)
• Data acquisition and evaluation software PicoScope
• Hand electrode
• Teflon-insulated measuring cable
• 4 NiMH rechargeable batteries (AA)
• Power supply unit 230V
• Carrying case
• User manual (English/)
• Factory calibration certificate
WT5000 - WALKING TEST KIT
Part Nr.
WT5000 Walking Test Kit - USB Version
• Handheld, portable, digital electrostatic field meter, detects and Measures electrostatic fields.
• The electrostatic field strength value (V/m) will be automatically translated to the electrostatic potential (V)
according to the preset distance.
• EFM023 with conductive base and the measuring head MK023
• By mounting the measuring head MK23 the EFM023 can be used for verification measurement of body voltage
(walking test) according to IEC 61340-4-5
• The EFM023 shows the positive and negative “PEAK” value of the measured body voltage.
• Walking test with UAD 110 on a PC
• Measures the air ionizer efficiency and the offset voltage
• Measures the electrostatic decay time from ±1,000 volts to ±100 volts (standard setting)
Includes:
• EFM023 with measuring head MK023 in conductive carrying case, test lead and hand electrode
• conductive base, ground connection clip
• spare 9V rechargeable battery, battery charger for 9V
• Analog converter UAC 110, KL_Readout software
• Connecting cable BNC, USB Y-cable
• High voltage generator ±1200 Volts
• charging plate, ground connection cable
• calibration certificate, English user’s manual
EFM023 AKC - Field meter, CPS, Walking Test
Part Nr.
EFM023.AKC EFM023 with carrying case with walking test kit and charged plate set and software
Walking Test Decay Time
• Two point probe adaptor
• Suitable for SRM110 and SRM200
Pins according to IEC 61340-4-10
(and IEC 61340-2-3 Edition 2.0)
• For the point to point measurement on small packaging and
inside cavities
• Conductive rubber electrodes (R < 20 ohm)
• Spring loaded mechanism for good contact
• Quick removable head
• Complies with IEC 61340-4-10
• Incl. calibration certificate
• For the point to point measurement on small packaging and inside cavities
• Conductive rubber electrodes (R < 20 ohm)
• Spring loaded mechanism for good contact
• Quick removable head
• Complies with IEC 61340-4-10
• Incl. calibration certificate
MINI PROBE SET
Part Nr.
Model 430 Mini probe Set, 2Point Probe
Part Nr.
PROBE 410 2 point probe for SRM only
Part Nr.
PROBE 840.SET Miniprobe Set Model 840 incl. conductive carrying case and a 2 point probe tip/model 844
PROBE 844.1 Replacement pins for probe tip 844 (unit: 2 pcs)
PROBE 844.C Calibration unit for Two-Probe, incl. calibration certificate
PROBE 841 Probe tip “mini ring probe” (optional for 840.SET), incl. calibration certificate
844.C
The 844.C resistors for the
verification the resistance meter
of before use840.SET
841 Probe
840 Probe
Small part measurement
SRM MINI PROBE MINI PROBE
Sample application
• Fitted with conductive silicone rubber electrode (R < 20
ohm)
• Total probe resistance R < 150 ohm
• 63,5 mm Ø
• 2,27 kg weight
• Insulative handle
•
Probe model 850 complies with IEC 61340-4-1 and IEC
61340-2-3
• For Resistance to ground and point to point resistance
measurement.
• Fitted with conductive silicone rubber electrode (R < 5 ohm)
with silver particle
• Total probe resistance R < 100 ohm
• 63,5 mm Ø
• 2,27 kg weight
• Insulative handle
Probe model 870 complies with
IEC 61340-4-1 and IEC 61340-2-3
• Fitted with conductive silicone rubber electrode (R < 20
ohm)
• Total probe resistance R < 150 ohm
• 63,5 mm Ø
• 2,27 kg weight
• Insulative handle
•
Probe model 850 complies with IEC 61340-4-1 and IEC
61340-2-3
• Measures surface and volume resistance.
• Concentric ring with conductive rubber (R < 5 ohm) with
silver particles
• External use of a 2,5 kg weight or 850 electrode required
• Include stainless steel plate, insulative plate, conductive
carrying case, blue guard cord and calibration certificate
• Ring probe Model 880 complies with IEC 61340-2-3
Part Nr.
PROBE 870.SET Electrode Model 870
Part Nr.
5works Electrode 5lb Probe
Part Nr.
PROBE 850 Probe Model 850
Part Nr.
RING PROBE 880 Concentric Ring Probe 880
Sample application
ELECTRODE PROBE PROBE MODEL 870
CONCENTRIC RING PROBEPROBE MODEL 850
• Dimensions: 400 x 300 x 2 mm
• 10mm snap connection
• For measuring of shoes, chairs, transport systems etc.
• Stainless steel
• measuring line is connected with 10mm banana plug
adapter
• For resistance to ground-/ point-to-point resistance / surface
resistance and volume resistance measurement.
• Conductive rubber with silver particles
• Weight: 2,5 kg
• Include stainless steel plate, insulative plate, conductive
carrying case, blue guard cord and calibration certificate
Complies with IEC 61340-4-1, IEC 61340-2-3
• Insulating frame with 4mm banana plug socket
• Contact electrode made of stainless steel
• Dimension: 130 ×80 × 40 mm (W×H×D)
This electrode is used to measure the resistance to ground
Of glove and finger cots as worm according to
ANSI/ESD TR53-01-15
• For point-to-point resistance measurement on ESD
garments
• Contact surface made of stainless steel 50 x 25 mm
• Clamps ensure good contact
• Qty. = pair
• Connection: banana plug socket
Complies with IEC 61340-4-9
Part Nr.
Glove Probe Glove Probe
Part Nr.
CL.49 Clamp Probe
Part Nr.
PROBE 870 Two-Side Electrode Model 870
Part Nr.
7110.PGT100.102 Metal Plate
Sample applicationSample application
Sample application
METAL PLATE TWO-SIDED PROBE
CLAMP PROBEGLOVE PROBE
• Hand-held probe made of electro polished steel
• Ø 25 mm
• Length: 75 mm
• Weight: 130 g
• For measurement footwear and flooring system resistance
according to IEC 61340-5-1
• The veribox contains resistors for the verfication of high
resistance tester before use
• 3 different resistors with 3 separate test sockets
• Resistor values: 10 Kohm, 1 Mohm, 1 Gohm
Part Nr.
VERIBOX Veribox
Part Nr.
HAND Probe Hand-held probe model 45
HAND-HELD PROBE VERIBOX
The electrostatic voltmeter - ESVM 2000 is a hand-held non-contacting voltmeter which measures the electrostatic
charges on very small objects. It is an ideal instrument for measurements on semiconductors, printed circuit boards,
connector pins and other areas where a conventional electrostatic fieldmeter cannot be used.
The ESVM 2000 comes with a high resolution sensor which provides accurate results even in very small areas.
Dimension: 6 x 3 x 13 cm (W x H x D)
Range: 0 up to ± 2 kV DC
Accuracy: 5% of full scale
Recommended Probe-to-Test
surface distance: 15 mm ± 10 mm
Power supply: battery operated
Display: LCD-Display ( 3 ½ digits)
Sensor: probe (10 x 80 mm)
Include: ESVM2000, probe, 9 Volt battery, conductive carrying case,
user’s manual and calibration certificate
ELECTROSTATIC VOLTMETER ESVM 2000
The electrostatic contact voltmeter ESVM 821 is a hand-held contact voltmeter which measures
the electrostatic surface potential on very small objects/surfaces. The ESVM 821HH measures the
surface potentials on conductive or insulative objects without charge transfer to the probe.
Therefore, measurements can be performed with high accuracy.
Dimension: 240 mm x 140 mm x 52,5 mm (H x W x D)
Range: 0 bis ± 2 kV DC or AC (peak)
Accuracy: < 1% of full scale
Input resistance: > 1 x 10^14 ohm
Input capacitance: < 1 x 10^-14 farad
Temperature/humidity: external temperature and humidity sensor
Power supply: Battery or line operated with power supply 230 VAC
Include:
ESVM821HH incl. battery, charger, carrying case,
User’s manual and calibration certificate
CONTACT VOLTMETER ESVM 821HH
Part Nr.
ESVM821HH Contact voltmeter Model 821HH
Part Nr.
ESVM2000 Electrostatic voltmeter ESVM 2000
With optimized aerodynamic design and fan speed control device, It is effective to ionize short/middle distance.
Due to small size and light-weight, the installation access is easier. Easy maintenance by using a supported discharge needle
cleaning brush and a detachable rubber cover.
Key Features
Medium and small size Ion Blower
Easy maintenance via automatic tip cleaning function <12A>
(12B : manual tip cleaning)
One-touch rubber cover for assemble/disassemble for maintenance
Fan speed controls applicable
Ion balance stays within ±2V through automatic ion balance control
LED illumination if the ion balance is off the optimal range or
fan abnormal <12A>
If RMS(Real Monitoring System) is installed,
the system can control up to 128 devices at once(Option) <12A>
Specifications
Part Nr.
SBL-12A Ion Blower SBL-12A
SBL-12B Ion Blower SBL-12B
Ion Blower SBL-12A/B
With optimized aerodynamic design and fan speed control device, It is effective to ionize middle/long distance. Due to slim and
light-weight, the
installation access is easier. Easy maintenance by using a supported discharge needle cleaning brush and a detachable rubber
cover.
Key Features
Medium and large size Ion Blower
Ion balance stays within ±2V through automatic ion balance control
Slim size, Light-weight, Low-noise
Easy maintenance via automatic tip cleaning function
Fan speed controls applicable(4Steps)
Interface compatibility with automation(PLC)
Ion unbalance / Fan abnormal alarming buzzer installed
Applying RMS(Real Monitoring System) to check operation status in real time(Option)
Specifications (20W)
Part Nr.
SBL-20W Ion Blower SBL-20W
SBL-30W Ion Blower SBL-30W
Ion Blower SBL-20W/30W
AC corona discharge Ion Gun which has stable ion balance and makes lots of ion for eliminating electricity rapidly also blowing
adhered dust. In addition, it is effective that the LED light on the device can visualize the particle in the area of pointing.
Key Features
Small size Gun type Ion Nozzle
Ion balance within ±10V(300mm)
Ergonomically designed Ion Gun
Identifying the particle/dust through LED light
Durable cable that was tested more than
150,000times of three-point-flexure test
Easy to disassemble the nozzle, therefore,
simple/easy tip cleaning
Ion Nozzle SIG-30
Subminiature Ion Nozzle can reduce pollution of discharge needle by adopting high frequency mode(Piezo : 72kHz). Appliable to
varius working environments with a variety Fitting Tube(Option) and adjustable bracket, and it brings quick ionization in a narrow
space. Also, adjusting an Air Filter(option) can prevent a contamination by air.
Key Features
Mini size Ion Nozzle
Infrared rays sensor Ion Nozzle <12S>
Easy to set sensor sensitivity and operation time
Ion balance with in ±15V(300mm / Air 0.3MPa)
Ozone-proof material selected : Teflon Nozzle
Tip cleaning cycle is extended by high frequency AC
Possible to connect up to 8ea of SPN-12/12S by
using Daisy Chain function (6 pole connector)
Applying a bracket which can adjust angle
Ion Nozzle SPN-12/12S
Part Nr.
SPN-12/12S Ion Nozzle
Part Nr.
SIG-30 Ion Nozzle SIG-30
Stretch film, permanently dissipative, amine-free polyolefin,
recyclable
Color: pink
Core diameter: 76 mm
Typical surface resistance RS = 10e10 – 10e11 ohm
Manual dispenser for stretch film
• Standard: variably adjustable to a film width of 450 or 500
mm, suitable for films with internal core diameter of 38 and
50 mm
• Premium: variably adjustable to a film width of 300, 400,
450 or 500 mm, suitable for films with an internal core
diameter of 38, 50 and 67 mm
• steplessly adjustable brake resistance of the dispenser for
optimal handling
• weight: 1.7 kg
Dissipative packaging bags, reclosable
with zipper, dissipative, amine-free,
transparent, recyclable.
Standard imprint: type designation, ESD
symbol and lot number.
Typical surface resistance
RS = 10e10 – 10e11 ohm
IDP-STAT® packaging bags; permanently
dissipative film; heat-sealable, recycable;
orange; standard imprint: type designation,
ESD symbol, recycling symbol and lot number.
Typical surface resistance RS = 10e9 - 10e10 ohm
Part Nr. Size Bags per box
3110.360 100 × 150 × 0.1mm 2500 pcs
3110.363 200 × 250 × 0.1mm 1000 pcs
3110.365 300 × 400 × 0.1mm 500 pcs
3110.366 400 × 500 × 0.1mm 500 pcs
3110.367 500 × 600 × 0.1mm 500 pcs
Part Nr.
Standard Ball bearing
Premium Multiple ball bearing
Part Nr.
Widthmm
Lengthm
Thick.mm
Coremm
Qty
SF0300 500 300 0.025 50 4
SF1560 500 1560 0.025 76 1
Part Nr. Size Bags per box
3010.150 100 × 150 × 0.1mm 2500 pcs
3010.153 200 × 250 × 0.1mm 1000 pcs
3010.154 250 × 300 × 0.1mm 500 pcs
3010.155 300 × 400 × 0.1mm 500 pcs
3010.156 400 × 500 × 0.1mm 500 pcs
Stretch Film Manual Dispenser
IDP-STAT Packing BagsDissipative Packing Bags
Dissipative air bubble film, dissipative,
pink, amine-free, recyclable polyethylene.
Two-layer film structure, inside smooth
Typical surface resistance RS = 10e10 - 10e11 ohm
Dissipative air bubble bag, dissipative,
pink, amine-free, recyclable polyethylene.
Two-layer film structure, exterior and interior smooth,
heat-sealable
Typical surface resistance RS = 10e10 - 10e11 ohm
Water-impermeable, antistatic PE foam
film, suitable as cover, envelope, separate
or intermediate layer, optimal cushioning
effect, easily workable, accurate
adaption to the product, protects from
scratching and contamination by dust,
Thickness: 1.5mm
recyclable. Color: pink.
Typical surface resistance RS = < 10e12Ohm
Water-impermeable, antistatic LDPE foam
film, suitable as cover, envelope, separate
or intermediate layer, optimal cushioning
effect, easily workable, accurate
adaption to the product, protects from
scratching and contamination by dust,
Thickness: 1.0mm
recyclable. Color: white
Typical surface resistance RS = 10e8 - 10e9 ohm
Dissipative Air Bubble Film Dissipative Air Bubble Bags
LDPE Foam FilmPE Foam Film
Part Nr. Width [mm] Length [m]
3150.2L.300 300 100
3150.2L.500 500 100
3150.2L.600 600 100
3150.2L.800 800 100
3150.2L.1200 1200 100
Part Nr. Width [mm] Length [m]
4561.15.600 600 150
4561.15.1200 1200 150
4561.15.1550 1550 350
Part Nr. Width [mm] Length [m]
4562.15.600 600 150
4562.15.1200 1200 150
4562.15.1550 1550 350
Part Nr. Size Bags per box
3152.150 250 × 150 × 0.1mm 1000 pcs
3152.250 250 × 250 × 0.1mm 1000 pcs
3152.300 250 × 300 × 0.1mm 1000 pcs
3152.400 360 × 400 × 0.1mm 500 pcs
Conductive air bubble film, electrostatically
conductive volume copolymer film,
threelayer, inside and outside smooth, recyclable,
heat-sealable, color: black,
Typical surface resistance RS = 10e4 - 10e6 ohm
CARBOSTAT® packaging bags made of electrostatically
volume conductive,
heat-sealable copolymer material, recyclable.
Color: black, standard imprint: type designation,
ESD symbol and lot number.
Typical surface resistance RS = 10e4 - 10e5 ohm
Metallized, transparent static shielding bags SCS 1000 type
"metal in“ dissipative polyester / aluminized / dissipative
polyethylene, side welded seam, heatsealable, Recyclable
Standard imprint: ESD symbol, type designation, recycling
symbol and lot number.
• Exterior - dissipative polyester
Surface resistance RS = 10e10 - 10e11 ohm
• Metallization - aluminized
• Interior - dissipative polyethylene
Surface resistance RS = 10e10 - 10e11 ohm
• Electrostatic shielding <10nJ (Energy Test)
• Three-layer film structure
• Exterior- HIGHSHIELD® film, smooth
Surface resistance RS = 10e10 - 10e11 ohm
• Interior - PERMASTAT® film, smooth
Surface resistance RS = 10e10 - 10e11 ohm
• Recyclable
Electrostatic shielding < 15 nJ (Energy Test)
Conductive Air Bubble Film CARBOSTAT Packing Bags
HIGHSHIELD Air bubble bagStatic Shielding Bag
Part Nr. Width [mm] Length [m]
3250.370 300 100
3250.371 400 100
3250.372 600 100
3250.373 1200 100
Part Nr. Size Bags per box
3210.150 100 × 150 × 0.08mm 2500 pcs
3210.153 200 × 250 × 0.08mm 1000 pcs
3210.155 300 × 400 × 0.08mm 500 pcs
3210.156 400 × 500 × 0.8mm 500 pcs
3210.157 500 × 600 × 0.08mm 500 pcs
Part Nr. Size Bags per box
3351.0406 100 × 150 + 50mm falp 500 pcs
3351.0508 130 × 200 + 50mm flap 250 pcs
3351.0609 150 × 225 + 50mm flap 250 pcs
3351.0810 200 × 250 + 50mm flap 250 pcs
3351.1012 250 × 300 + 50mm flap 250 pcs
Part Nr. Size Bags per box
100.0810 203 × 254 × 0.07mm 100 pcs
100.1214 305 × 356 × 0.07mm 100 pcs
100.2024 508 × 609 × 0.07mm 100 pcs
Typical surface resistance Rg =10e6 ~10e7 ohm
ESD Microfiber
Part Nr. Size Thickness
ADC-001 ESD Microfiber Fabric 1,400 mm × 54 m 0.5 mm
ADC-002 ESD Microfiber MAT 960 mm × 9.5 m 2.7 mm Adhesive
ADC-003 ESD Microfiber MAT 960mm × 9.5 m 2.5 mm
ADC-004 Thin ESD Microfiber MAT 700mm × 10 m 0.9 mm Adhesive
ADC-005 ESD Microfiber Tape 40mm × 30 m 0.2 mm Adhesive
Typical surface resistance Rg =10e7 ~10e8 ohm
* suitable for loose laying as well as for bonding
*resistant to solder and heat
* two-layer structure
* high-impedance bottom layer
* Material thickness: 2mm
* Complete with 2 snaps 10mm and rounded corners
* In compliance with ESD standard DIN EN 61340-5-1
ESD Table mats
Part Nr. Size
1402.662 Beige, Grey, Green, light blue 600 x 600, 600 x 900, 600 x 1200
1402.663 Beige, Grey, Green, light blue 700 x 1200, 800 x 1200
ESD Chair
Wheel: wheel body made of polypropylene (polyamide = AK series) with ball bearing; rubber tread, black, electrically conductive
A plasticizer diffusion can lead to a disoloration of the floor, hardness approx. 80° - 85° Shore A
Typical resistance = Rs 10e5 ~ 10e6 ohm
ESD Wheel, Caster
Part Nr. MaterialTypical
Resistance RpgSeat size
(mm)Height
Floor to Seat
HZR 002 Leather Chair 10e6~ 10e9 440×410 Min 61cm / Max 83cm
HZR 007 Leather Chair 10e6~ 10e9 440×410 Min 40cm / Max 54cm
HZR 006 PU Stool 10e7~ 10e9 Diameter 325 Min 39cm / Max 52cm
HZR 004 PU Chair 10e7~ 10e9 420×400 Min 42cm / Max 56cm
Part Nr. Size Width KgWheel
SetCasterFixed
CasterSwivel
CasterSwivel
Stopper
2 inch 50 20 40
3 inch 75 32 80
4 inch 100 32 100
5 inch 125 32 120
HZR 002 HZR 007 HZR 006 HZR 004
Diddipative polyethylene waste bags, recyclable
colors : red, green, blue
Liters: 30, 50, 110 liters
imprint: ESD symbol
PU = 100 pieces
In compliance with ESD standard DIN EN 61340-5-1
Typical surface resistance Rg = 10e6 ~10e8 ohm
Volume conductive plastic handle
Interated nature bristles with conductive fibers
For cleaning ESD susceptible devices
In compliance with ESD standard DIN EN 61340-5-1
ESD Flat BrushWaste bags dissipative
Part Nr.
6101.K Brush length: 190mm width: 30mm, Brush length 760mm, Dustpan length 870mm
6101.KS170 Brush length: 250mm, Shovel: 250x300mm, Stick made of aluminum 740mm
6101.400 Brooms, Aluminum stick 1480mm, Brush width: 400mm, 500mm
6105.S.290.SET width 310mm / depth 160mm
Part Nr.
6100.1001 150mm Flat brush-smoot
6100.1002 100mm Flat brush-smoot
Part Nr.
3101.626 30 liters, blue
3101.625 50 liters, red, blue
3101.627 110 liters, red, green, blue
ESD Dustpan Set
Typical surface resistance Rg =10e6 ~10e9 ohm
Typical surface resistance Rg = 10e7 ~10e9 ohm Typical surface resistance Rg = 10e7 ~10e9 ohm
ESD CutterESD Scissors
Part Nr. Width [mm] Length [mm] Part Nr. Width [mm] Length [mm]
S003 30 * 30 150 S006 60 * 19 175
S004 40 * 40 170 S007 90 * 23 230
S005 35 * 17 180 S008 130 * 33 255
Part Nr.
ESD Cutter ESD Cutter
Part Nr.
ESD Scissors ESD Scissors
ESD Brush
3
4
5
6
7
8
Typical surface resistance = Rp-p = 10e6 ~ 10e9 ohm
B: 1.8 mm, C: 1.0 mm; plastic tips
Typical surface resistance = Rp-p = 10e5 ~ 10e8 ohm
Exchanged Tip
• self-adhesive, width: 50mm
Dissipative version:
Typical surface resistance = Rp-p = 10e6 ~ 10e8 ohm
Floor marking ESD measuring point for marking measuring
points on the floor
PVC film self-adhesive, slip-resistant coating
PU = 10 pieces
ESD Ball Pen ESD Tweezer
FLOOR MARKING TAPES FLOOR MARKING LABEL/ESD TEST POINT
Part Nr. Sizes Quantity
2822.1.5025 Thickness: 300u, PVC 25m per roll
2822.2.5066 Thickness: 70u, PP 66m per roll
Dissipative version
2822.3.5033 Thickness: 140u, PVC 33m per roll
Part Nr. Size
ESD-259A ESD Tweezer 130 mm
Part Nr. Sizes Quantity
2822.1.MP.DE Outer dimension 130mmInner dimension 70mmThickness 300u, PVC
10 pcs
Part Nr.
ESD Pen ESD Ball Pen
Typical surface resistance Rg =10e5 ~10e7 ohm
ESD Socks
Part Nr. Size
CE-617-11 Black / Man Ankle 250~260mm / Sole 230~240mm
CE-617-12 Black / Woman Ankle 200~210mm / Sole 200~210mm
CE-617-21 Gray / Man Ankle 250~260mm / Sole 230~240mm
CE-617-22 Gray / Woman Ankle 200~210mm / Sole 200~210mm
Typical surface resistance Rg =10e6 ~10e7 ohm
ESD Carbon Gloves
Part Nr. Size
HJTG-0004 ESD carbon PU palm 6/S, 7/M, 8/L, 9/XL, 10/XXL, 11/XXXL
HJTG-0004-1 ESD carbon PU fingertips 6/S, 7/M, 8/L, 9/XL, 10/XXL, 11/XXXL
HJTG-0004-2 ESD carbon seamless 6/S, 7/M, 8/L, 9/XL, 10/XXL, 11/XXXL
HJTG-0004-3 ESD carbon PVC dotted 6/S, 7/M, 8/L, 9/XL, 10/XXL, 11/XXXL
접지 / 등전위 접합 시스템 asc0717@naver.com
인체 접지 요구사항 asc0717@naver.com
EPA ESD 제어 품목들 asc0717@naver.com
EPA ESD 제어 품목들 asc0717@naver.com
EPA ESD 제어 품목들 asc0717@naver.com
EPA ESD 제어 품목들 asc0717@naver.com
부도체 / 포장재 / 절연된 도체 asc0717@naver.com
추가적인 고려사항 asc0717@naver.com
top related