unidades deventilacion - confixx · unidades deventilacion 2h-400°c r r eds emd bda gdd...
Post on 27-Aug-2018
289 Views
Preview:
TRANSCRIPT
UNIDADES DE VENTILACION
2H-400°C
R
R
EDS EMD
BDA
GDD
serie TECNIVENTserie TECNIVENTVENTILATION UNITS
INDICE
UNIDADES CON ENVOLVENTE
UNIDADES SIN ENVOLVENTE
1.
3.
Indice
Gama fabricación y Nomenclatura
Características constructivas
2.
4-5
Dimensiones
6.7.8.9.10.11.
Dimensiones
12.13.14.15.
16.17.
Tablas de selección
18-2122-2425-2627-28
29.
Generalidades
EDS
EDD
EDT
EMD (y selección)
ESS
BDA-2H400
GDS
GDD
GDT
GSS
Definición y accesorios
Selección de unidades
EDS-BDA-GDS
EDD-GDD
EDT-GDT
ESS-GSS
Instalación y mantenimiento
Pág. 1
R
RUNIDADES DE VENTILACIÓNVENTILATION UNITS
INDEX
UNITS WITH CASING
UNITS WITHOUT CASING
1.
3.
Index
Production range and Codes
Construction characteristics
2.
4-5
Dimensions
6.7.8.9.10.11.
Dimensions
12.13.14.15.
16.17.
Selection table
18-2122-2425-2627-28
29.
Description
EDS
EDD
EDT
EMD (and selection)
ESS
BDA-2H400
GDS
GDD
GDT
GSS
Definition and accesories
Unit selection
EDS-BDA-GDS
EDD-GDD
EDT-GDT
ESS-GSS
Installation and maintenance
Para la renovación del aire en cualquier tipo de local,bien sea como extractores o bien como impulsoresTECNIVEL ofrece al mercado una amplia variedad deUnidades deVentilación.Completando la gama con nuevasseries como las de 400°C 2 horas y adecuando suconstrucción a la normativa vigente (Marcado CE).
Tratando de facilitar la selección de nuestras unidades,hemos adaptado, en función de la aplicación a que vayan aser destinadas, los siguientes criterios:
Es el criterio habitualmente aemplear. Se debe usar cuando se trate de una instalaciónde ventilación normal, sin ningún requerimiento especialpor su aplicación o ubicación.
Se recomienda su utilización en instalaciones deventilación para oficinas, establecimientos públicos,restaurantes, gimnasios, centros comerciales, etc.
Selección estándar:
Selección silenciosa:
Selección industrial:
Cuando se trate de ventilarespacios, donde se requiera un nivel sonoro mínimo, talescomo viviendas, salas de conferencias, auditorios, estudiosde TV y radio, cines, teatros, determinadas salas dehospitales o laboratorios, etc, debe emplearse este criteriode selección.
En aquellos casos donde losequipos vayan a ser utilizados para aplicacionesgeneralmente industriales, donde el nivel sonoro delentorno, sea, o pueda ser, superior al que pudieran generarlas propias unidades, en fabricas, aparcamientos, etc.
Estos criterios son validos, sobre todo cuando laspresiones estáticas que se necesiten, estén en valoresconsiderados como habituales para aplicaciones deventilación, es decir, de hasta 600 Pa.
Los ventiladores integrantes en las unidades, objetode este catálogo, pertenecen al tipo centrifugo, con rodetesde acción (álabes curvados hacia delante) y se aplicangeneralmente en instalaciones de baja presión.Pueden serde dos tipos: con eje libre, accionados por un motor,mediante un sistema de transmisión por poleas-correas ylos que disponen del motor de accionamiento acopladodirectamente al mismo.
Nuestra gama de fabricación abarca hasta un caudalde aire de 80.000 m /h. La elección del equipo obedecerá alas características de la instalación, espacio disponible, etc.
Bajo demanda se fabrican unidades para otroscaudales y presiones, así como ejecuciones especialespara instalaciones industriales que así lo requieran.
De acuerdo con la norma Básica de Edificación NBE-CPI / 96 TECNIVEL ha diseñado una gama de unidadesbifuncionales de ventilación para evacuación de humos.Homologadas en laboratorios oficialmente autorizados ycapaces de trabajar durante 2 horas a 400°C.
Todas las unidades de ventilación de nuestra serieTECNIVENT, cumplen la directiva de seguridad demáquinas 89/392/CEE y sus modificaciones 91/368/CEE,93/44/CEE, 93/68/CEE y 97/37/CEE, extendiendose con elsuministro el correspondiente certificado de conformidadCE.
3
Unidades de ventilación 400°C/2h.
Marcado CE
R
RGENERALIDADESGENERALS
Pág. 2
For air renewal in any kind of premises either throughexhaust-fans or impellers, TECNIVEL offers a wide varietyof Ventilation Units to which new series are added such asthose for 400 2 hours, whose construction is compliantwith the existing standards (CE Marking).
In order to facilitate the selection of our units, we haveestablished the following criteria depending on theapplication:
: This is the criteria to be followedin normal circumstances, that is, when the ventilationinstallation is standard and does not have any specialrequirements due to its application or location.
This kind of selection is recommended in installationsfor offices, public premises, restaurants, gymnasiums,shopping centres, etc.
: This criteria is to be applied incases where spaces require minimum sound level such ashomes, conference halls, auditoriums, TV and radiostudios, cinemas, theatres, certain hospital rooms orlaboratories, etc.
: This criteria is to be applied incases where the units will be generally used in industrialapplications, such as factories, car parks, etc., where thesourrounding level may be superior to the noise generatedby the units.
This criteria is especially useful when the staticpressure required is standard for ventilation applications ofup to 600 Pa.
The ventilation units included in this catalogue havecentrifugal, forward curved blade fans and are typicallyinstalled in low-pressure installations. They are divided intwo groups: Units with indirect drive fans,motor-operatedthrough a belt transmission, and units with direct drivemotors.
Our production range reaches airflows of up to 80,000m³/h. Each unit has to be selected according to the kind ofinstallation, available , etc.
Units for other airflows and pressures are made ondemand, as well as specific performances required forcertain industrial installations.
In accordance with the Spanish Basic Standard forBuildings NBE-CPI / 96, TECNIVEL has designed acomplete range of bifunctional units for smoke extract.Theyhave been qualified by officially approved laboratories andare able to work for 2 hours at 400 C.
All ventilation units belonging to the TECNIVENTseries comply with the European Machinery Directive89/392/EC which relates to machine safety standards, andwith its modifications 91/368/EC, 93/44/EC, 93/68/EC and97/37/EC. All units are delivered with a CE Certificate ofConformity.
Standard selection
Low noise selection
Industrial selection
space
°C
°
Ventilation units 400ºC/2h.
CE marking
GAMA FABRICACIÓN Y NOMENCLATURAPRODUCTION RANGE - CODES
R
R
EDS EDD EDT
ESS
GDS
GSS
EMD BDA
GDD GDT
SIMPLE RODETESINGLE FAN
TRIPLE RODETETRIPLE FAN
DOBLE RODETEDOUBLE FAN
DefiniciónDefinition
UN
IDA
DE
S D
EV
EN
TIL
AC
IÓN
CO
N E
NV
OLV
EN
TE
VE
NT
ILAT
ION
UN
ITS
WIT
H C
AS
ING
Do
ble
Asp
irac
ión
Dou
ble
inle
tS
imp
le A
spir
ació
nS
ingl
e in
let C
on
Tran
smis
ión
Indi
rect
driv
e
UN
IDA
DE
S D
EV
EN
TIL
AC
IÓN
SIN
EN
VO
LVE
NT
EV
EN
TIL
ATIO
N U
NIT
SW
ITH
OU
T C
AS
ING
Do
ble
Asp
irac
ión
Dou
ble
inle
tS
imp
le A
spir
ació
nS
ingl
ein
let C
on
Tran
smis
ión
Indi
rect
driv
e
Do
ble
Asp
irac
ión
Dou
ble
inle
t
UD
. DE
VE
NT
ILA
CIÓ
NC
ON
EN
VO
LVE
NT
EV
EN
TIL
ATIO
N U
NIT
SW
ITH
CA
SIN
G
Mo
tor
Dir
ecta
m.
Aco
pla
do
Dire
ct d
rive
Do
ble
Asp
irac
ión
Dou
ble
inle
t
Co
nTr
ansm
isió
nIn
dire
ct d
r ive
UNIDADES DE VENTILACIÓN 2H400VENTILATION UNITS 2H400
Las unidades de ventilación serie TECNIVENT quedan definidas porel conjunto de tres letras arriba indicado seguido de un número queindica el tamaño del equipo.
Modelo EDD-200: se trata de una unidad con envolvente conventilador centrífugo de doble aspiración y doble rodete, accionadomediante poleas y correas, para un caudal estándar de 22.400 m /h.
Ejemplo:
3
Pág. 3
The code of the ventilation units belonging to the TECNIVENT seriescorresponds to the above mentioned three letters followed by anumber which indicates the size of the unit.
EDD-200 model: Unit with casing and centrifugal fan of double inletand double fan which is driven by pulleys and belts and has beendesigned for a standard airflow of 22.400 m³/h.
Example:
UNIDADES DE VENTILACION CON ENVOLVENTE
R
RCARACTERISTICAS CONSTRUCTIVASCONSTRUCTION CHARACTERISTICS
SERIE "E"Las unidades de ventilación con envolvente la componen
dos grupos con ventiladores de doble y simple aspiración. Losprimeros pueden ser de uno (EDS), dos (EDD) o tres rodetes(EDT). Existe otro grupo con ventilador de doble aspiración,con el motor directamente acoplado al rodete (EMD).
formada por paneles de chapa galvanizadacon aislamiento termo-acústico por el interior.
Según el tamaño de la unidad, queda construidamediante omegas o zetas para apoyar o colgarrespectivamente, o bien sobre una robusta bancadaconstruida mediante paneles y perfiles galvanizados.
centrifugo con rodete de acción, galvanizado.Puede ser de doble o simple aspiración (unidades ESS),accionado mediante transmisión por poleas y correastrapeciales, o con motor directamente acoplado.
En las unidades con transmisión porpoleas el motor es trifásico , según normaeuropea IEC. En las unidades de acoplamiento directo, elmotor es monofásico 220V 50 Hz, de una velocidad concondensador (a excepción de los modelos EMA-60 y EMA-80,cuyo motor es trifásico).
El conjunto motor-ventilador, en unidadescon transmisión, queda aislado de la carcasa medianteantivibradores y junta elástica en la boca de impulsión.
Son de suministro opcional, con lamas dealuminio extruido (tipo ES) o (tipo 150-C), según se indica entablas de dimensiones, para giro en oposición y accionamientomanual o motorizado.
en entrada y salida de aire para facilitar elacoplamiento a los conductos.
Por laterales y tapa superior mediante fácildesmontaje o una puerta con bisagras, dependiendo deltamaño del equipo. En unidades EMD, al ser los panelesintercambiables, la orientación se puede modificarse, aunquela posición del motor respecto al ventilador es fija.
Todas las unidades con transmisiónllevarán protectores y dependiendo del modelo (altura interiormayor 1.600 mm.) rejilla de protección en los oídos delventilador. La descarga irá protegida si no va conducida, esimprescindible se indique esta opción.
Las unidades se entregan sin pintarpara montaje interior. Quedan completas con los dispositivosde seguridad para marcado .
CARACTERÍSTICAS CONSTRUCTIVAS
Envolvente
Base:
Ventilador
Motor eléctrico:
Amortiguación:
Compuertas:
Embocaduras
Acceso:
Protecciones:
Acabado y montaje:
CE
con protección IP-55
VENTILATION UNITS WITH CASING
"E" SERIESThere are two groups of ventilation units with casing:
double inlet and single inlet. Ventilation units with double inletcan have one (EDS), two (EDD) or three (EDT) impellers. Theother group includes the units with double inlet and a motordirectly fitted to the impeller (EMD).
The is made of galvanized steel sheet with internalthermo-acoustic insulation.
: Depending on the size of the unit, the base includesomega or theta profiles for floor or wall mounting respectively. Itcan also be mounted on a heavy ducty base made ofgalvanized steel.
centrifugal forward curved fan made of galvanizedsteel.Two options are available, double or single inlet type (ESSunits). The fans are driven by V-Belt transmission or by directdrive motors.
: In units with pulley transmission, themotor is 3-phase with IP-55 protection, in accordance with theIEC European Standard. In direct drive units, the motor is singlephase 220V 50 Hz with single speed and capacitor (exceptEMA-60 and EMA-80 models, whose motor is 3-phase).
All indirect drive units have the fan-motor assembly insolated with anti-vibration mounts and aflexible connection between the fan outlet and the casing.
Optionally fitted, made of extruded aluminiumprofiles (type ES or 150-C) as shown on dimension tables,opposed rotating suitable for manual setting or for actuators.
Included so as to facilitate thecoupling to the ducts.
: Through the sides and the top cover by means ofeasily desmountable or through a hinged door, depending onthe size of the unit. In EMD units, in which case panels areinterchangeable, the access can be modified although themotor is positioned in a fixed manner with respect to the fan.
: All units with transmission areequipped with belt guards and, depending on the size (interiorheight above 1,600 mm), they also include protective grilles onfan inlets. Fan discharge is protected when it is not linked toducts, but must be indicated when ordering.
: Units are delivered unpainted forindoor assembly. They are completely assembled with safetydevices when approved.
CONSTRUCTION CHARACTERISTICS
casing
Base
Fan:
Electric motors
Antivibration mounts:
Dampers:
Inlet and outlet flanges:
Access
Protection devices
Finish and assembly
CE
Pág. 4
EDS ESS EMD
UNIDADES DE VENTILACION CON ENVOLVENTE.
R
R
Serie " "BDA-2H400Envolvente
Ventilador
Motor eléctrico
Transmisión
Acabado y montaje:
HOMOLOGACION
formada por paneles y perfiles, construidos enchapa de acero galvanizada y ensamblados mediantetornillería cadmiada.
centrifugo de doble oído con rodete de acción.Rodamientos de bolas con soporte de fundición situados en elexterior de la envolvente con protectores.
trifásico, con protección IP55 situadofuera del flujo de aire.
por y situadas en el exterior.Queda protegida por cubrecorreas de acero galvanizado.
Las unidades se entregan sin pintar yestán previstas para montaje interior.
Su resistencia al fuego ha sido ensayada y verificada, porlaboratorio homologado, según NORMA : pr EN 12101-3 (doshoras a 400°C) cumpliendo las exigencias de la NBE CPI-96.
poleas correas
UNIDADES DE VENTILACION SIN ENVOLVENTE.
Serie "G"Ventilador
Motor eléctrico
Transmisión
Base:
Amortiguadores:
Protecciones:
Acabado y montaje:
CE
centrifugo construido en chapa galvanizadacon rodete de acción. Puede ser de doble (unidades GDS;GDD y GDT) o simple aspiración (unidades GSS).
trifásico, , cerradosegún normas europeas IEC.
mediante poleas y correas trapeciales.Queda protegida con un cubrecorreas de acero galvanizado.
El conjunto motoventilador va soportado por unabancada de acero galvanizado, con un soporte motor quepermite el tensado de las correas.
El suministro incluye los antivibradoresy junta elástica en la boca de impulsión.
Las unidades se entregan sin pintar ypara montaje interior. Quedan completas con los dispositivosde seguridad para marcado .
con protección IP-55
Los oídos de aspiración van protegidos conrejillas de acero galvanizado perforado. La descarga iráprotegida si no va conducida, es imprescindible se indique estaopción, antes de elaborar el presupuesto.
GDS GSS
CARACTERISTICAS CONSTRUCTIVASCONSTRUCTION CHARACTERISTICS
VENTILATION UNITS WITH CASING.
" " SeriesBDA-2H400Casing
Fan
Electric motor
Transmission
Finish and assembly:
CERTIFICATION
made of galvanized steel panels assembled withcadmium-plated nuts and bolts.
with double inlet forward curved impeller.Ball-bearingswith cast iron support and protective covers fitted outside thecasing.
3-phase, with IP55 protection, and ismounted outside the airflow.
through pulleys and belts mounted outsidethe unit. It is protected by galvanized steel belt-guards.
units are delivered unpainted forindoor assembly.
The fire resistance of the units has been tested and verifiedby an authorised laboratory, in accordance with the pr EN12101-3 Standard (2 hours at 400 C) and the requirements ofthe NBE CPI-96.
°
VENTILATION UNITS WHITOUT CASING
"G" SeriesFan
Electric motor
Transmission
Unit base
Antivibrations mounts
Protection devices
Indoor finish and assembly
CE
made of galvanized steel. It has forward curvedimpeller and can be double inlet (GDS, GDD and GDT units) orsingle inlet (GSS units).
is 3-phase, with IP55 protection. It is aclosed type in compliance with IEC European Standards.
through pulleys andV-belts. It is protected bygalvanized steel belt-guard.
the fan motor assembly is supported by agalvanized steel base and is equipped with a motor supportwhich allows tensioning of the belts.
the units are delivered withantivibration mounts and flexible connection fitted to the fanoutlet.
fan inlets are protected by perforatedgalvanized steel grilles. Discharge is protected when it is notlinked to ducts but this option must be indicated when ordering.
units are delivered unpaintedfor internal assembly. They are completely assembled withsafety devices when approved.
Pág. 5
400°C - 2h400°C - 2h
R
RUNIDADES CON ENVOLVENTEUNITS WITH CASING
620
480
380
330
260
210
165
125
100
80
65
50
40
30
25
20
3.000
2.600
2.200
1.985
1.785
1.585
1.485
1.385
1.285
1.085
975
875
775
650
650
550
2.350
2.150
1.950
980
980
820
720
720
620
570
520
2.400
2.200
2.000
1.285
1.285
1.085
935
875
825
775
675
1.370
1.370
1.220
1.070
1.070
920
770
770
600
600
500
400
400
400
300
300
2.600
2.100
1.800
1.600
1.300
1.200
1.000
900
900
700
650
650
550
450
450
350
1.260
1.130
1.010
940
940
800
610
610
485
485
410
350
350
295
270
215
1.260
1.130
1.010
895
680
670
610
510
560
435
380
390
315
280
255
235
1.300
1.000
800
600
500
400
330
280
200
170
130
100
85
70
60
45
78.750
63.220
50.400
41.530
31.620
26.470
18.360
15.310
13.060
10.110
7.570
6.670
5.370
4.000
3.320
2.590
IndustrialIndustrial
67.500
54.190
43.200
35.600
27.100
22.690
15.730
13.120
11.200
8.670
6.490
5.720
4.610
3.430
2.850
2.220
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
56.250
45.160
36.000
29.670
22.580
18.910
13.110
10.930
9.330
7.220
5.410
4.760
3.840
2.860
2.370
1.850
SilenciosaLow noise
21,88
17,56
14,00
11,54
8,78
7,35
5,10
4,25
3,63
2,81
2,10
1,85
1,49
1,11
0,92
0,72
18,75
15,05
12,00
9,89
7,53
6,30
4,37
3,64
3,11
2,41
1,80
1,59
1,28
0,95
0,79
0,62
15,63
12,54
10,00
8,24
6,27
5,25
3,64
3,04
2,59
2,01
1,50
1,32
1,07
0,79
0,66
0,52
SELECCION / SELECTION
EDS
TAMAÑOSIZE
A B C K L R S
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
(1) Compuerta de regulación .opcional
Serie EDSUnidades de extracción o impulsión con envolvente, equipadas conventilador centrífugo de doble aspiración y simple rodete, accionado pormotor electrico mediante poleas y correas trapeciales.
EDS SeriesExtract or supply units with casing, equipped with single wheel,centrifugal fan with double inlet and electric motor with v-belttransmission.
1.885
1.785
1.985
1.885
EDS
Pág. 6
(2) Orientaciones
(2)
(2)
1.685
1.585
(2)
1.485
1.385
(2)
1.485
1.385
(2)
S ==
A C
120180
K x L B
R
(1)
(1) Optional control damper. (2) Fan directions
1.585
1.785
1.585
1.785
(2)
(2)
1.385
1.535
(2)
1.235
1.335
(2)
1.235
1.335
(2)
UNIDADES CON ENVOLVENTEUNITS WITH CASING
R
R
660
520
420
330
250
200
160
130
100
80
60
50 1.085 635 875 400 700 270 255 180
1.185 735 975 400 800 295 280 210
1.385 835 1.085 500 900 350 315 240
1.585 835 1.085 500 1.100 350 390 320
1.685 975 1.185 500 1.300 410 380 290
1.885 1.075 1.285 620 1.400 485 435 340
2.285 1.075 1.285 620 1.800 485 560 455
2.2851.385
770 1.800 610 510 365
2.485 770 2.100 610 610 405
2.800 1.650 1.700 920 2.600 800 670 505
3.000 1.850 2.000 1.070 2.700 940 680 505
3.600 1.850 2.000 1.220 3.000 940 895 715 1.250
1.000
750
550
470
400
340
270
210
170
140
120
83.070
63.240
52.940
36.720
30.620
26.130
20.220
15.150
13.350
10.750
8.010
6.650
IndustrialIndustrial
71.200
54.200
45.380
31.470
26.240
22.400
17.340
12.980
11.440
9.220
6.870
5.700
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
59.340
45.170
37.820
26.220
21.870
18.660
14.450
10.820
9.530
7.680
5.720
4.750
SilenciosaLow noise
23,07
17,57
14,71
10,20
8,50
7,26
5,62
4,21
3,71
2,99
2,22
1,85
19,78
15,06
12,61
8,74
7,29
6,22
4,82
3,61
3,18
2,56
1,91
1,58
16,48
12,55
10,50
7,28
6,07
5,18
4,01
3,01
2,65
2,13
1,59
1,32
SELECCION / SELECTION
EDD
TAMAÑOSIZE
A B C K L R S T
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
(1) Compuerta de regulación .opcional
Serie EDD EDD Series
EDD
Pág. 7
(2) Orientaciones
S=
A
T =S
C
120180
K x L B
R
(1)
1.485(2)
1.485
1.585(2)
(1) Optional control damper. (2) Fan directions
Unidades de extracción o impulsión con envolvente, equipadas conventilador centrífugo de doble aspiración y doble rodete, accionado pormotor electrico mediante poleas y correas trapeciales.
1.335
1.235(2)
1.335
1.235(2)
Extract or supply units with casing, equipped with double whell,centrifugal fan with double inlet and electric motor with v-belttransmission.
UNIDADES CON ENVOLVENTEUNITS WITH CASING
R
R
375
300
240
195
150
120
90
75 1.585 635 975 300 1.300 270 255 180
1.685 735 975 400 1.300 295 280 210
1.985 875 1.085 400 1.700 345 315 240
2.285 875 1.085 400 2.000 345 390 320
2.285 975 1.185 470 2.000 410 375 290
2.600 1.050 1.300 620 2.100 485 435 340
3.300 1.050 1.300 620 2.700 485 560 455
3.000 1.350 1.500 770 2.700 610 505 365 600
500
420
320
260
220
190
170
45.920
39.190
30.330
22.720
20.020
16.120
12.010
9.970
IndustrialIndustrial
39.360
33.600
26.010
19.470
17.160
13.830
10.300
8.550
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
32.800
27.990
21.670
16.230
14.290
11.520
8.580
7.120
SilenciosaLow noise
12,76
10,89
8,43
6,31
5,56
4,48
3,34
2,77
10,93
9,33
7,22
5,41
4,77
3,84
2,86
2,38
9,11
7,78
6,02
4,51
3,97
3,20
2,38
1,98
SELECCION / SELECTION
EDT
TAMAÑOSIZE
A B C K L R S T
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
(1) Compuerta de regulación opcional.
S=
A
T =S
C
120180
K x L B
R
(1)
T S
Serie EDT EDT Series
EDT
Pág. 8
(1) Optional control damper.
Unidades de extracción o impulsión con envolvente, equipadas conventilador centrífugo de doble aspiración y triple rodete, accionado pormotor electrico mediante poleas y correas trapeciales.
Extract or supply units with casing, equipped with triple wheel,centrifugal fan with double inlet and electric motor with v-belttransmission.
R
R
(1) Compuerta de regulación . (2) Regleta para conexión eléctrica exterior. (3) Escuadras de fijación.opcional
S=
AC
120
K x LBR
(1)
Serie EMD EMD SeriesUnidades de extracción o impulsión con envolvente, equipadas conventilador centrífugo de doble aspiración con el motor directamenteacoplado al rodete.
Extract or supply units with casing, equipped with double inlet centrifugalfan and direct drive motor.
=
0
100
200
300
400
400 500 1.000 2.000 3.000 4.000 5.000 10.000
EMD
- 10
EMD - 5
EM
D - 12
EMD
- 15
EMD - 20
V (m /h)3
V (m/s)
EM
D - 35
EMD
- 45
EMD - 60
EMD
- 25
Pa (N/m )2 SELECCIÓN / SELECTION
(2)
60
45
35
25
20
15
12
10
5 450 270 270 200 300 105 260
500 400 400 200 300 210 235
500 400 400 200 300 210 235
650 470 470 300 350 270 255
650 470 470 300 350 270 300
700 520 520 400 400 295 280
850 600 600 400 600 345 315
850 600 600 500 600 345 390
850 600 600 500 600 345 390 60
57
54
36
30
27
20
20
15
6.000
4.500
3.500
2.500
2.000
1.500
1.200
1.000
500
Caudal deAire
(m /h)3Air Flows
(m /s)3
1,67
1,25
0,97
0,70
0,55
0,42
0,33
0,28
0,14
EMD
TAMAÑOSIZE
A B C K L R S
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
Kw Nº polos Tensión
MOTOR
0,04
0,07
0,15
0,15
0,25
0,25
0,55
0,55
1,1
4
6
4
6
6
6
6
6
6
1~220V50Hz
3~220/380V
0,11 0,14 0,28 0,55 0,83 1,11 1,39 2,78
EMD
Pág. 9
UNIDADES CON ENVOLVENTEUNITS WITH CASING
(3)
(1) Optional modulating damper (2) External electrical connection. (3) Mounting brackets.
Nº poles Current
R
R
180
130
100
80
60
40
30
20 600 720 935 280 295 185 170 245
650 820 1.085 315 350 215 170 265
775 920 1.185 400 410 275 170 330
875 995 1.285 450 485 305 170 400
975 1.335 560 610 320 200 455
975 1.435 630 700 355 200 420
1.085 1.535 710 800 415 200 470
1.185 1.785 800 940 470 200 515 370
300
250
200
130
110
80
60
21.700
16.230
12.140
9.600
7.230
5.480
3.630
2.660
IndustrialIndustrial
18.600
13.910
10.400
8.230
6.200
4.690
3.110
2.280
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
15.500
11.590
8.670
6.860
5.170
3.910
2.590
1.900
SilenciosaLow noise
6,03
4,51
3,37
2,67
2,01
1,52
1,01
0,74
5,17
3,86
2,89
2,29
1,72
1,30
0,86
0,63
4,31
3,22
2,41
1,91
1,44
1,09
0,72
0,53
SELECCION / SELECTION
ESS
TAMAÑOSIZE
A B C D R S T V
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
C
B
R
S
AC
T V
øD
Serie ESS ESS Series
ESS
Pág. 10
UNIDADES CON ENVOLVENTEUNITS WITH CASING
1.485
1.385
(1)
1.585
1.485
(1)
1.685
1.585
(1)
1.985
1.785
(1)
(1) Orientaciones (1) Fan directions
Unidades de extracción o impulsión con envolvente, equipadas conventilador centrífugo de simple aspiración, accionado por motor electricomediante poleas y correas trapeciales.
Extract or supply units with casing, equipped with a single inletcentrifugal fan and electric motor withV-belt transmission.
R
R
Serie BDAUnidades de extracción utilizadas como las del tipo convencional enaplicaciones de ventilación, concebidas y homologadas para extraerhumos y aire a 400°C, en caso de incendio durante 2 h.Equipadas con ventiladores centrífugos de doble aspiración y motor contransmisión por poleas y correas situado fuera del flujo de aire.Deben ser instaladas de las zonas con riesgo de incendio.
la motorización puede estar en contacto con el aire a 400 °C.fuera
Nunca
BDA Series
330
260
210
165
125
100
80
65
50
40
30
25
700
600
480
400
350
230
200
160
140
130
95
70
41.530
31.620
26.470
18.360
15.310
13.060
10.110
7.570
6.670
5.370
4.000
3.320
IndustrialIndustrial
35.600
27.100
22.690
15.730
13.120
11.200
8.670
6.490
5.720
4.610
3.430
2.850
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
29.670
22.580
18.910
13.110
10.930
9.330
7.220
5.410
4.760
3.840
2.860
2.370
SilenciosaLow noise
11,54
8,78
7,35
5,10
4,25
3,63
2,81
2,10
1,85
1,49
1,11
0,92
9,89
7,53
6,30
4,37
3,64
3,11
2,41
1,80
1,59
1,28
0,95
0,79
8,24
6,27
5,25
3,64
3,04
2,59
2,01
1,50
1,32
1,07
0,79
0,66
SELECCION / SELECTION
BDA
TAMAÑOSIZE
2.210 1.530 1.700 1.130 2.050 940 895
2.010 1.530 1.600 1.010 2.050 940 680
1.810 1.300 1.400 905 1.740 800 670
1.510 1.090 1.300 805 1.535 610 610
1.410 1.090 1.200 715 1.535 610 510
1.400 855 1.050 635 1.220 485 560
1.250 855 1.000 565 1.220 485 435
1.100 725 850 505 1.070 410 380
1.000 635 800 455 980 350 390
900 635 750 405 980 350 315
780 535 650 360 830 295 280
680 485 600 320 760 270 255
A B C D H R S
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
S ==AC
øD
L (máx.)
H(máx)
R
B
Extract units are used as standard types and also as air and smokeextract applications at 400 C for 2 hours in case of fire.They are equipped with centrifugal double inlet fan with motor and v-belttransmission fitted out of the airflow.These units must be installed from the areas with a risk of fire.Motorsand transmission must be in contact with the air at 400 C.
°
°far
never
EXTRACTORESBIFUNCIONALESBIFUNCTIONAL
EXTRACT UNITS
BDA2H400
Pág. 11
(1)
(1) Las dimensiones corresponden a las potencias máximas de motores(Según el caudal y presión pueden llevar diferente tamaño de motor.)
400°C - 2h400°C - 2h
ORIENTACIONES, únicamente son posibles: 101-209
TABLAS DE SELECCIÓN Nº 18, 19, 20 y 21.
(1) Dimensions correspond to maximum motor sizes(Motor size may vary depending on airflow and pressure.)
FAN DIRECTIONS available: 101-209
SELECTION TABLES nº18, 19, 20 and 21.
2.450
2.250
1.990
1.690
1.590
1.560
1.410
1.260
1.160
1.060
940
840
L(1)
R
R
620
480
380
330
260
210
165
125
100
80
65
50
40
30
25
20
1.650
1.520
1.390
1.260
1.040
960
900
800
750
620
570
570
490
450
400
400
2.070
1.900
1.720
1.530
1.530
1.300
1.090
1.090
770
770
640
550
550
470
420
390
2.190
2.050
1.870
1.690
1.690
1.480
1.320
1.320
1.170
1.170
1.000
880
880
790
750
630
1.260
1.130
1.010
940
940
800
610
610
485
485
410
350
350
295
270
215
1.260
1.130
1.010
895
680
670
610
510
560
435
380
390
315
280
255
235
1.880
1.730
1.570
1.440
1.440
1.230
1.080
1.080
820
820
710
630
630
560
510
480
2.340
2.150
2.000
1.750
1.750
1.500
1.290
1.290
1.050
1.050
920
790
790
690
640
560
740
570
430
290
250
210
170
150
100
85
70
60
55
40
30
20
78.750
63.220
50.400
41.530
31.620
26.470
18.360
15.130
13.060
10.110
7.570
6.670
5.370
4.000
3.320
2.590
IndustrialIndustrial
67.500
54.190
43.200
35.600
27.100
22.690
15.730
13.120
11.200
8.670
6.490
5.720
4.610
3.430
2.850
2.220
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
56.250
45.160
36.000
29.670
22.580
18.910
13.110
10.930
9.330
7.220
5.410
4.760
3.840
2.860
2.370
1.850
SilenciosaLow noise
21,88
17,56
14,00
11,54
8,78
7,35
5,10
4,25
3,63
2,81
2,10
1,85
1,49
1,11
0,92
0,72
18,75
15,05
12,00
9,89
7,53
6,30
4,37
3,64
3,11
2,41
1,80
1,59
1,28
0,95
0,79
0,62
15,63
12,54
10,00
8,24
6,27
5,25
3,64
3,04
2,59
2,01
1,50
1,32
1,07
0,79
0,66
0,52
SELECCION / SELECTION
GDS
TAMAÑOSIZE
A B C R S B1 C1
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
Serie GDSGrupos motor-ventiladores de extracción o impulsión, con ventiladorcentrífugo de doble aspiración y simple rodete, accionado por motoreléctrico mediante poleas y correas trapeciales.
GDS Series
C1 (máx.)
B1
S
A
C (máx.)
B
R
GRUPOS MOTOR-VENTILADORFAN-MOTOR ASSEMBLIES GDS
Pág. 12
(1) Las dimensiones corresponden a las potencias máximas de motores (Según el caudal y presión pueden llevar diferente tamaño de motor.)
(1) (1)
(1) Dimensions correspond to maximum motor size (Motor size may vary depending on airflow and pressure.)
Extract or supply fan-motor-assemblies, equipped with, centrifugaldouble inlet fan and electric motor withV-belt transmission.
Serie GDD GDD Series
R
R
660
520
420
330
250
200
160
130
100
80
60
50 920 480 860 270 255 180 540 760
1.000 530 920 295 280 210 590 810
1.130 610 980 350 315 240 660 880
1.370 610 980 350 390 320 660 880
1.310 750 1.080 410 380 290 790 970
1.550 880 1.190 485 435 335 910 1.080
1.930 880 1.190 485 560 450 910 1.080
1.740 1.090 1.320 610 510 365 1.090 1.290
2.050 1.090 1.440 610 610 405 1.110 1.410
2.200 1.350 1.590 800 670 505 1.300 1.620
2.230 1.580 1.790 940 680 505 1.510 1.850
2.870 1.580 1.790 940 895 715 1.510 1.850 550
490
410
330
280
200
180
150
120
110
90
70
83.070
63.240
52.940
36.720
30.620
26.130
20.220
15.150
13.350
10.750
8.010
6.650
IndustrialIndustrial
71.200
54.200
45.380
31.470
24.060
22.400
17.340
12.980
11.440
9.220
6.870
5.700
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
59.340
45.170
37.820
26.220
26.240
18.660
14.450
10.820
9.530
7.680
5.720
4.750
SilenciosaLow noise
23,07
17,57
14,71
10,20
8,50
7,26
5,62
4,21
3,71
2,99
2,22
1,85
19,78
15,06
12,61
8,74
6,68
6,22
4,82
3,61
3,18
2,56
1,91
1,58
16,48
12,55
10,50
7,28
7,29
5,18
4,01
3,01
2,65
2,13
1,59
1,32
SELECCION / SELECTION
GDD
TAMAÑOSIZE
A B C R S T B1 C1
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
B1B
R
S
A
S T
GRUPOS MOTOR-VENTILADORFAN-MOTOR ASSEMBLIES GDD
Pág. 13
(1) (1)
C1 (máx.)C (máx.)
(1) Las dimensiones corresponden a las potencias máximas de motores (Según el caudal y presión pueden llevar diferente tamaño de motor.)(1) Dimensions correspond to maximum motor size (Motor size may vary depending on airflow and pressure.)
Grupos motor-ventiladores de extracción o impulsión, con ventiladorcentrífugo de doble aspiración y doble rodete, accionado por motoreléctrico mediante poleas y correas trapeciales.
Extract or supply fan-motor assemblies, equipped with double wheel,double inlet centrifugal fans with electric motor and V-belttransmission.
Serie GDT GDT Series
R
R
S
A
S TS T
B
R
B1
375
300
240
195
150
120
90
75 1.360 480 860 270 255 180 540 760
1.490 530 920 295 280 210 590 810
1.800 660 980 350 315 240 710 880
2.080 660 980 350 390 320 710 880
1.980 770 1.080 410 380 290 820 970
2.320 910 1.190 485 435 335 930 1.180
2.940 910 1.190 485 560 450 930 1.180
2.610 1.140 1.440 610 510 365 1.150 1.410 350
280
240
200
170
150
110
80
45.920
39.190
30.330
22.720
20.020
16.120
12.010
9.970
IndustrialIndustrial
39.360
33.600
26.010
19.470
17.160
13.830
10.300
8.550
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
32.800
27.990
21.670
16.230
14.290
11.520
8.580
7.120
SilenciosaLow noise
12,76
10,89
8,43
6,31
5,56
4,48
3,34
2,77
10,93
9,33
7,22
5,41
4,77
3,84
2,86
2,38
9,11
7,78
6,02
4,51
3,97
3,20
2,38
1,98
SELECCION / SELECTION
GDT
TAMAÑOSIZE
A B C R S T B1 C1
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
GRUPOS MOTOR-VENTILADORFAN-MOTOR ASSEMBLIES GDT
Pág. 14
(1) (1)
C1 (máx.)C (máx.)
(1) Las dimensiones corresponden a las potencias máximas de motores (Según el caudal y presión pueden llevar diferente tamaño de motor.)(1) Dimensions correspond to maximum motor size (Motor size may vary depending on airflow and pressure.)
Grupos motor-ventiladores de extracción o impulsión, con ventiladorcentrífugo de doble aspiración y triple rodete, accionado por motoreléctrico mediante poleas y correas trapeciales.
Extract or supply fan-motor assemblies, equipped with triple wheel,double inlet centrifugal fans with electric motor and V-belttransmission..
R
R
S
A
B
R
B1øD
180
130
100
80
60
40
30
20 330 530 850 295 185 280 590 750
380 610 980 350 215 315 660 880
440 700 1.080 410 275 400 750 970
480 830 1.180 485 305 450 860 1.080
580 1.090 1.280 610 320 560 1.080 1.290
610 1.170 1.350 700 355 630 1.140 1.380
670 1.300 1.440 800 415 710 1.230 1.500
760 1.530 1.650 940 470 800 1.440 1.750 250
190
160
140
85
70
55
40
21.700
16.230
12.140
9.600
7.230
5.480
3.630
2.660
IndustrialIndustrial
18.600
13.910
10.400
8.230
6.200
4.690
3.110
2.280
EstándarStandard
Caudales de Aire - Air Flows(m /h)3 - (m /s)3
15.500
11.590
8.670
6.860
5.170
3.910
2.590
1.900
SilenciosaLow noise
6,03
4,51
3,37
2,67
2,01
1,52
1,01
0,74
5,17
3,86
2,89
2,29
1,72
1,30
0,86
0,63
4,31
3,22
2,41
1,91
1,44
1,09
0,72
0,53
SELECCION / SELECTION
GSS
TAMAÑOSIZE
A B C R S D B1 C1
PESOAprox.
WEIGHT(Kg)
DIMENSIONES (mm) DIMENSIONS
GRUPOS MOTOR-VENTILADORFAN-MOTOR ASSEMBLIES GSS
Pág. 15
Serie GSS GSS Series
(1) (1)
C1 (máx.)C (máx.)
(1) Las dimensiones corresponden a las potencias máximas de motores (Según el caudal y presión pueden llevar diferente tamaño de motor.)(1) Dimensions correspond to maximum motor size (Motor size may vary depending on airflow and pressure.)
Grupos motor-ventiladores de extracción o impulsión, con ventiladorcentrífugo de simple aspiración, accionado por motor eléctricomediante poleas y correas trapeciales.
Extract or supply fan-motor assemblies, equipped with single inletcentrifugal fan with electric motor andV-belt transmissions..
R
RDEFINICIÓN Y ACCESORIOSDEFINITION AND ACCESORIES
ESQUEMA DE SITUACIONES Y REGISTRO.
POSICIÓN ENTRADA DE AIRE
IHSHFP LI LD
ACCESORIOS Y FABRICADOS ESPECIALES
Bajo demanda las unidades se pueden suministrar conlas siguientes variantes constructivas o accesorios:
Aislamiento protegido con chapa perforada o lisa(Sandwich).
Montaje intemperie (Incluye tejadillo, picos de flauta a laentrada o salida de aire y pintura exterior).
Envolvente pintada en epoxi.
Compuertas: regulación;sobrepresión.
Filtros de fibra o metálicos.
Ventiladores: pintado en epoxi;
Motores: dos velocidades; monofásicos;
Serie EMD: Motores de tres velocidades; Reguladoresde velocidad.
antichispas; con registroy drenaje.
anti-deflagrantes;antiexplosivos.
DIAGRAM OF POSITION AND ACCESS
POSITION OF AIR INLET
ACCESORIES AND SPECIAL FEATURES
Pág. 16
Protección transmisión Montaje intemperie Compuerta de regulación Filtros de fibra
Nota: El lado de registro se refiere, situadosfrente a la salida del flujo de aire.
Note: The access side refers to lookinginto the airflow outlet
Sentidoaire
Sentidoaire
LADO IZQUIERDOORIENTACIONES DEL VENTILADOR (Lado transmisión)
101 113 107 115 103 111
LADO DERECHO215 205 209203 211 207
Airdirection
LEFT SIDE FAN DIRECTIONS (Transmision side)
RIGHT SIDE
Airdirection
ORIENTACIONES DEL VENTILADOR (Lado transmisión)FAN (Transmision side)DIRECTIONS
Orientaciones unidades EMD únicamente son posibles:Acceso lado izquierdo: 113-115-111Acceso lado derecho: 209-215-211
EMD units directions available:Access left hand side: 113-115-111Access right hand side: 209-215-211
On demand, units can be supplied with the followingaccessories or special features:
Insulation protected with perforated or flat (Sandwich)sheet.
Weather-proof mounting (Includes cowl, protectiondevices against rain at inlet and outlet air, and outdoorpaint)
Epoxy-painted casing
and anti-return dampers
Fibre or metallic filters
Fans: Epoxy-painted; spark-proof; with access and drainpan.
two speeds; single phase; flame-proof;explosion-proof.
EMD series: three-speed motors;speed regulators.
Modulating
Motors:
Belt guards Outdoor mounting Control damper Fibre filters
R
RSELECCIÓN DE UNIDADESVENTILATION UNITS
Las tablas de las páginas Nº 18 a 28 han sido elaboradaspara poder determinar según sea la selección
, de forma rápida y sencilla.
Las características de trabajo corresponden aventiladores, de doble y simple aspiración, establecidas parauna temperatura de aire de 20°C y una presión barométrica de760 mm Hg, equivalente a una densidad de 1,2 Kg/m .Cualquier variación de la densidad del aire implica la utilizaciónde los coeficientes de corrección indicados en la tabla Nº1.
estándar,silenciosa o industrial
Los límites de trabajo por temperatura están situadosentre puede ampliarse a 110 C, con ventiladoresde la serie reforzada.
-30 y 80°C, °
3
EJEMPLOS DE APLICACIÓN Aire en condiciones normales
Datos:
SILENCIOSACriterio aplicado: SelecciónCaudal de aire: 10.800 m /h. -3 m /s.Presión estática: 350 Pa.Altitud: 0 m. - Temperatura del Aire: 20°C
3 3
Procedimiento de Selección:130
silenciosa
Aire en condiciones especiales
Datos:
INDUSTRIAL
Procedimiento de Selección:
130industrial
En la tabla de la página Nº23, elegimos el tamaño ,correspondiente a la selección obtenemos:
Potencia motor:3Kw.Velocidad de rotación ventilador:820 R.P.M.
Criterio aplicado:SelecciónCaudal de aire: 16.200 m /h. -4,5 m /s.Presión estática: 470 Pa.Altitud: 1.500 m. - Temperatura del Aire: 38°C
En la tabla Nº1, vemos el coeficiente de corrección 0,785.El caudal en volumen permanece invariable y la presiónestática corregida es de 470 : 0,785 = 599 Pa.
En la Tabla de la página Nº28, elegimos el tamaño ,correspondiente a la selección , obtenemos:
Potencia de motor:7,5 Kw.Velocidad de rotación:680 R.P.M.La velocidad de rotación real es leída en la tabla; y la
potencia motor es de 7,5 x 0,785 = 5,9 Kw, manteniendose lapotencia inicial del motor (7,5 Kw.).
3 3
TEMPERATURADEL AIRE
-40 1.234 1.191 1.170 1.150 1.128 1.105 1.066 1.028 0.987 0.956760 735 720 705 695 680 655 630 610 585
300 450 600 750 900 1200 1500 1800 2100PRESION BAROMETRICA mm Hg
ELEVACION SOBRE EL NIVEL DEL MAR m.
°C
-18 1.152 1.110 1.092 1.072 1.052 1.033 0.950 0.957 0.922 0.8940 1.082 1.043 1.024 1.005 0.990 0.970 0.934 0.900 0.865 0.838
20 1.000 0.964 0.947 0.930 0.913 0.896 0.864 0.832 0.799 0.77438 0.946 0.912 0.895 0.878 0.863 0.847 0.816 0.785 0.755 0.73266 0.869 0.838 0.824 0.807 0.793 0.779 0.750 0.722 0.695 0.67293 0.803 0.775 0.760 0.747 0.733 0.720 0.693 0.667 0.642 0.622
121 0.747 0.720 0.707 0.695 0.682 0.670 0.645 0.622 0.592 0.578
TABLA Nº1 / TABLE Nº1
150
Pág. 17
The tables on pages 18 to 28 have been designed fordetermining the kind of selection
easily and quickly.
Temperature limits ranges from and can beextended to 110 C with fans belonging to the reinforced series.
Features correspond to fans with single and double inletand are established for an air temperature of 20 C and anatmospheric pressure of 760 mm Hg equivalent to a density of1.2 Kg/m³. In case of any variation in air density, the correctionfactors indicated in table 1 must be taken into account.
standard, low noise orindustrial
30 C to 80 C° °°
°
GAGE PRESSURE mm Hg
ELEVATION ABOVE SEA LEVEL m.
EXAMPLES OF APPLICATIONS
Air in standard conditions
Air with special conditionsData:
Data:LOW NOISE
Selection procedure:130
Low noise
INDUSTRIAL
Selection procedure:
130industrial
Criteria applied: selectionAirflow:10,800 m³/h. -3 m³/s.Static pressure:350 Pa.Height:0 m.- Air temperature:20ºC
From the table on page 23, we choose the sizecorresponding to the selection and we obtain:
Motor power:3Kw.Rotation speed:820 rpm.
Criteria applied: selectionAirflow:16,200 m³/h.4.5 m³/s.Static pressure:470 Pa.Height:1,500 m.- Air temperature:38ºC
From table 1, we find the 0.785 correction factor.Volume of airflow remains constant and corrected static
pressure is 470:0.785 = 599 Pa.From the table on page 28, we choose the size
corresponding to the selection and we obtain:Motor power:7.5 kW.Rotation speed:680 rpm.
Actual rotation speed is obtained from the table.Motor poweris the following: 7.5 x 0.785 = 5.9 kW. Initial motor power ismaintained (7.5 kW).
AIRTEMPERATURE
R
RTABLAS DE SELECCIONSELECTION TABLES
EDS/GDS/BDAEDS/GDS/BDA
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
-0,750,750,550,550,550,370,250,25
-0,750,750,750,550,550,550,370,370,25
--0,750,750,750,550,550,550,370,37
---0,750,750,750,550,550,550,37
-----0,750,750,550,55
------0,750.750,750,55
-194018501760166015601460135012401110
-197018801790170016101510141013001180
--19101830174016501560146013601250
---1880179017101620153014301320
-----1770168015901500
------1740166015701470
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
0,46
0,52
0,57
0,62
0,67
0,72
m /s3
20
Caudal / Airflow
1.670
1.855
2.040
2.225
2.410
2.595
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
0,750,750,550,550,550,550,370,370,250,25
-0,750,750,550,550,550,550,370,370,25
--0,750,750,750,550,550,550,370,37
---0,750,750,750,550,550,550,37
-----0,750,750,750,550,55
------0,750,750,750,75
1640150014201340126011701070980870760
-1500142013401260118010901000900800
--143013501280120011101020930840
---13701290122011401050970890
-----1240117010901010940
------120011301060990
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
0,59
0,66
0,73
0,79
0,86
0,92
m /s3
25
Caudal / Airflow
2.140
2.375
2.615
2.850
3.090
3.325
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,100,750,750,750,550,550,550,370,37
1,101,100,750,750,750,550,550,550,370,37
1,101,101,100,750,750,750,550,550,55
1,501,101,101,100,750,750,750,550,550,55
1,501,101,101,101,101,100,750,750,550,55
1,501,501,501,101,101,101,100,750,750,75
146013301260119011201040960880790690
146013301270120011301060980900810720
1460134012801210115010801000930840760
1470135012901230116011001030950880800
1480137013101250119011201050980910830
14901380133012701210115010801020950880
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
0,72
0,79
0,87
0,95
1,03
1,11
m /s3
30
Caudal / Airflow
2.575
2.860
3.150
3.435
3.720
4.005
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,101,101,100,750,750,550,550,550,370,37
1,501,101,101,100,750,750,750,550,550,37
1,501,101,101,101,100,750,750,750,550,55
1,501,501,501,101,101,101,100,750,750,55
-1,501,501,501,101,101,101,100,750,75
--1,501,501,501,51,101,101,100,75
120010901030960900830770690620530
119010801020960900840770710630560
118010801020970910850790720650580
118010801030970920860800740680610
-10801030980930880820760700640
--10401000940890840780730670
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
0,96
1,07
1,17
1,28
1,39
1,49
m /s3
40
Caudal / Airflow
3.455
3.840
4.225
4.610
4.990
5.375
1400
0,37
0,75
0,25
0,37
Pág. 18
R
R
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,501,501,101,101,100,750,750,550,550,37
2,201,501,501,101,101,100,750,750,550,55
2,201,501,501,501,101,101,100,750,750,55
2,202,201,501,501,501,101,101,101,100,75
2,202,202,202,201,501,501,501,101,101,10
-2,202,202,202,201,501,501,501,101,10
1290117011101040970900820740650550
1280117011001040970900820750660580
1280116011001040970900830760680600
1270116011001040980910840770700630
1270116011001040980920860790720660
-116011101050990930870810750690
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,19
1,32
1,46
1,59
1,72
1,85
m /s3
50
Caudal / Airflow
4.290
4.765
5.245
5.720
6.195
6.675
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
2,201,501,501,501,101,101,100,750,750,55
2,202,201,501,501,501,101,101,100,750,75
2,202,202,201,501,501,501,101,101,10-
3,002,202,202,202201,501,501,501,10-
3,003,002,202,202,202,201,501,501,50-
3,003,003,003,002,202,202,202,20--
1040940890840780730670610540480
1030930890840790730680620560500
1020930890840790740690640580-
1020940890850800760710660610-
1030950900860820770730680630-
1030960920870830790750700--
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,35
1,50
1,65
1,80
1,95
2,10
m /s3
65
Caudal / Airflow
4.870
5.410
5950
6.490
7.035
7.575
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
-2,202,201,501,501,101,101,100,750,55
3,002,202,202,201,501,501,101,1000,750,75
3,002,202,202,202,201,501,501,101,100,75
3,003,002,202,202,202,201,501,501,101,10
4,003,003,003,002,202,202,201,501,501,10
4,003,003,.003,003,002,202,202,201.501,50
-780740690650600550500440380
850780740690650600550500450390
850770740690650610560510460410
850780740700660610570520480430
850780740700660620580540490450
850780750710670630590550510470
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,81
2,01
2,21
2,41
2,61
2,81
m /s3
80
Caudal / Airflow
6.500
7.225
7.945
8.670
9.390
10.110
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
3,003,002,202,202,201,501,501,101,100,75
4,003,003,002,202,202,201,501,501,100,75
4,003,003,003,002,202,202,201,501,101,10
4,004,003,003,003,002,202,202,201,501,10
4,004,004,003,003,003,002,202,202,201,50
--4,004,004,003,003,003,002,202,201,50
900820770720670620570510450380
890810770720670620570520460400
890800760720670630580530470410
880800760720680630590540480430
880800770720680640590550500450
--810770730690650610560510470
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,33
2,59
2,85
3,11
3,37
3,63
m /s3
100
Caudal / Airflow
8.400
9.330
10.265
11.200
12.130
13.065
TABLAS DE SELECCIONSELECTION TABLES
EDS/GDS/BDAEDS/GDS/BDA
Pág. 19
R
R
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
4,003,003,002,202,202,201,501,501,101,10
4,003,003,003,002,202,202,201,501,501,10
4,004,003,003,003,002,202,202,201,501,50
5,504,004,004,003,003,003,002,202,202,20
5,505,504,004,004,003,003,003,002,202,20
5,505,505,504,004,004,004,003,003,003,00
780710670630600560520480440390
770710680640610570540500460410
780720690650620590550520480440
780730700670640600570540500460
790740710680650620590560520490
810750730700670640610580550510
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,73
3,04
3,34
3,64
3,95
4,25
m /s3
125
Caudal / Airflow
9.840
10.935
12.030
13.120
14.215
15.310
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
7,505,505,504,004,003,003,002,202,201,50
7,505,505,505,504,004,003,003,002,202,20
7,507,505,505,505,504,004,003,003,002,20
7,507,507,505,505,505,504,004,003,003,00
9,007,507,507,505,505,505,504,004,003,00
9,009,007,507,507,505,505,505,504,004,00
620560530500470440400370330290
620560530500470440410380340310
620560540510480450420390360320
620570540510490460430400370340
620570550520500470440430390360
630580560530510480460430400370
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
4,73
5,25
5,78
6,30
6,83
7,35
m /s3
210
Caudal / Airflow
17.020
18.910
20.800
22.690
24.580
24.670
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
7,505,505,505,504,004,003,003,002,201,50
7,507,505,505,505,504,004,003,003,002,20
9,007,507,505,505,505,504,004,003,003,00
9,007,507,507,505,505505,504,004,003,00
11,009,007,507,507,505,505,505,504,004,00
11,009,009,009,007,507,507,505,505,504,00
530480450430400370340300270230
530480450430400370340310280240
520480450430400370340310280250
520480450430400380350320290270
520480460430410380360330310280
520480460440410390370340320290
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
5,65
6,27
6,90
7,53
8,16
8,78
m /s3
260
Caudal / Airflow
20.325
22.585
24.840
27.100
29.360
31.620
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
4,004,003,003,003,002,202,201,501,501,10
5,504,004,003,003,003,002,202,202,201,50
5,504,004,004,003,003,003,002.202,202,20
-5,505,504,004,004,003,003,003,002,20
-5,505,505,504,004,004,004,003,003,00
-7,505,505,505,505,504,004,004,003,00
780720680640610570530490440390
780720690650620580540500460420
780730700660630590560520480440
-740710680640610580540500470
-750720690660630600560530490
-760740710680650620590550520
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
3,28
3,64
4,01
4,37
4,73
5,10
m /s3
165
Caudal / Airflow
11.800
13.110
14.425
15.735
17.045
18.360
TABLAS DE SELECCIONSELECTION TABLES
EDS/GDS/BDAEDS/GDS/BDA
Pág. 20
R
R
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
9,007,507,505,505,505,504,003,003,002,20
9,007,507,507,505,505,505,504,003,003,00
11,009,007,507,507,505,505,505,504,004,00
11,009,009,009,007,507,507,505,505,504,00
15,0011,009,009,009,007,507,507,505,505,50
15,0011,0011,0011,0011,0011,0011,007,507,505,50
510460440410380360330300260230
510460440410390360330300270240
500460440410390360340310280250
500460440420390370340320290260
500460440420400370350320300270
510470450420400380360330310290
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
7,42
8,24
9,06
9,89
10,71
11,54
m /s3
330
Caudal / Airflow
26.700
29.670
32.635
35.600
38.570
41.535
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
11,009,009,007,507,507,505,505,504,004,00
15,0011,009,009,007,507,507,505,505,505,50
15,0011,0011,0011,0011,0011,007,507,507,505,50
15,0015,0015,0011,0011,0011,0011,0011,007,507,50
18,5015,0015,0015,0015,0011,0011,0011,0011,0011,00
18,5018,5015,0015,0015,0015,0015,0015,0011,0011,00
490450430400380350320290260230
490450430400380350330300270240
490450430410380360330310280250
490450430410390370340320290270
500460440420390370350330300280
500460440420400380360340320300
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
9,00
10,00
11,00
12,00
13,00
14,00
m /s3
380
Caudal / Airflow
32.400
36.000
39.600
43.200
46.800
50.400
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
15,0011,0011,0011,0011,007,507,505,505,504,00
15,0015,0011,0011,0011,0011,007,507,507,505,50
15,0015,0015,0011,0011,0011,0011,0011,007,507,50
18,5015,0015,0015,0015,0011,0011,0011,0011,0011,00
22,0018,5018,5015,0015,0015,0015,0011,0011,0011,00
22,0022,0018,5018,5018,5015,0015,0015,0015,0015,00
440400380360340310290260230200
440400380360340320290270240210
440400380360340320300270250230
440400390370350330300280260240
440410390370350330310290270250
450410390380360340320300280270
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
11,29
12,54
13,80
15,05
16,31
17,56
m /s3
480
Caudal / Airflow
40.640
45.160
49.670
54.190
58.710
63.220
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
18,5015,0015,0011,0011,0011,0011,007,507,505,50
18,5015,0015,0015,0015,0011,0011,0011,007,507,50
22,0018,5018,5015,0015,0015,0011,0011,0011,0011,00
22,0022,0018,5018,5015,0015,0015,0015,0011,0011,00
30,0022,0022,0022,0018,5018,5018,5015,0015,0015,00
30,0030,0030,0022,0022,0022,0018,5018,5018,5018,50
390360340320300280260230210180
390360340320300280260240210190
390360340320300290270240220200
390360340330310290270250230210
390360350330310300280260240220
400370350340320300290270250240
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
14,06
15,63
17,19
18,75
20,31
21,88
m /s3
620
Caudal / Airflow
50.625
56.250
61.875
67.500
73.125
78.750
TABLAS DE SELECCIONSELECTION TABLES
EDS/GDS/BDAEDS/GDS/BDA
Pág. 21
R
RTABLAS DE SELECCIONSELECTION TABLES
EDD/GDDEDD/GDD
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,501,501,501,101,101,100,750,550,55
2,201,501,501,501,101,101,100,750,750,55
2,202,201,501,501,501,501,101,100,750,75
2,202,202,202,201,501,501,501,101,101,10
3,002,202,202,202,201,501,501,101,10
3,003,002,202,202,202,202,201,501,501,50
17301570149014101320123011301030920800
17201570149014101330124011401050950840
17201580150014201340126011701080980890
173015901510144013601280119011101020930
174016001530146013801300122011401060
1750162015501480141013301260118011101040
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,19
1,32
1,45
1,58
1,72
1,85
m /s3
50
Caudal / Airflow
4.280
4.750
5.225
5.700
6.175
6.650
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,10 1,10 1,50 1,50 1,50 2,201,100,750,750,55
1,10 1,50 1,50 2,20 2,20 2,201,101,100,750,75
1,50 1,50 2,20 2,20 2,20 3,001,101,101,100,75
1,50 2,20 2,20 2,20 2,20 3,001,501,501,101,10
2,20 2,20 2,20 2,20 3,00 3,001,501,501,501,10
2,20 2,20 3,00 3,00 3,00 3,002,202,201,501,50
1100 1180 1250 1330 1400 15301010920830720
1110 1190 1260 1330 1400 15301030950860760
1130 1200 1270 1340 1410 15301050970890800
1150 1220 1290 1360 1420 154010801000920830
1180 1250 1310 1370 1440 155011101030960880
1210 1270 1330 1390 1450 157011401070990920
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,43
1,59
1,75
1,91
2,07
2,22
m /s3
60
Caudal / Airflow
5.150
5.720
6.290
6.870
7.440
8.010
990
0,75
1,50
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
3,002,202,201,501,501,501,100,750;75
3,002,202,202,202,201,501,501,101,100,75
3,003,002,202,202,202,201,501,501,101,10
4,003,003,003,002,202,202,201,501,501,50
4,003,003,003,003,002,202,202,201,50
4,004,004,003,003,003,003,002,202,202,20
1260114010801010950880800730650560
1250113010701010950880810740660580
1240113010701010950890830760690610
1240113010801020960900840780710640
1240114010901030980920860800740
1250115011001050990940880820760700
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,92
2,13
2,35
2,56
2,77
2,99
m /s3
80
Caudal / Airflow
6.910
7.680
8.450
9.220
9.985
10.750
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
2,20 2,20 2,20 3,00 3,00 4,001,501,501,100,75
2,20 2,20 3,00 3,00 3,00 4,002,201,501,501,10
2,20 3,00 3,00 3,00 4,00 4,002,202,201,501,50
3,00 3,00 3,00 4,00 4,00 5,502,202,202,201,50
3,00 3,00 4,00 4,00 4,00 5,503,002,202,202,20
4,00 4,00 4,00 4,00 5,50 5,503,003,003,002,20
940 1020 1100 1170 1230 1360860770680580
940 1020 1090 1160 1220 1350870780700600
950 1020 1090 1160 1220 1340870790710630
960 1020 1090 1160 1220 1340880810730660
970 1030 1100 1160 1220 1330900830760690
980 1040 1110 1160 1220 1330920850790720
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,38
2,65
2,91
3,18
3,44
3,71
m /s3
100
Caudal / Airflow
8.580
9.530
10.490
11.440
12.390
13.350
670
1,10
2,20
Pág. 22
R
R
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
4,003,003,003,002,202,202,201,501,10
4,004,004,003,003,003,002,202,201,501,50
5,504,004,004,003,003,003,002,202,20-
5,505,505,504,004,004,003,003,002,20-
7,505,505,505,504,004,003,003.00-
7,507,505,505,505,505,504,004,00--
1090990930880820760700640570500
1080980930880820770710650590530
1080980930880830780720670610-
1080990940890840790740690640-
1080990950900860810760710670
10901000960920870830780740--
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,71
3,01
3,31
3,61
3,91
4,21
m /s3
130
Caudal / Airflow
9.740
10.820
11.900
12.980
14.070
15.150
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
3,00 3,00 3,00 4,00 4,00 -2,202,201,501,10
3,00 3,00 4,00 4,00 5,50 5,503,002,202,201,50
3,00 4,00 4,00 5,50 5,50 5,503,003,002,202,20
4,00 4,00 5,50 5,50 5,50 7,504,003,003,002,20
4,00 5,50 5,50 5,50 7,50 7,504,004,003,003,00
5,50 5,50 5,50 7,50 7,50 7,504,004,004,003.00
630 680 730 770 820 -580520460400
630 680 730 770 810 890580530470410
640 680 730 770 810 890590540480430
650 690 730 770 810 890600550500450
650 700 740 780 820 890610560520470
670 710 750 790 820 900620580530490
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
3,61
4,01
4,41
4,82
5,22
5,62
m /s3
160
Caudal / Airflow
13.000
14.450
15.890
17.340
18.780
20.220
-
1,50
4,00
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
7,505,505,504,004,003,003,002,201,50
7,505,505,505,504,004,003,003,002,202,20
7,507,505,505,505,504,004,003,003,002,20
9,007,507,505,505,505,504,004,003,003,00
9,007,507,507,505,505,504,004,003,00
9,009,007,507,507,505,505,505,504,004,00
950860810760710650600540470400
940850800760710650600540480420
930850800750710660610550490430
930840800760710660610560510450
920840800760720670620580520
930850810770730680640590540490
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
4,67
5,18
5,70
6,22
6,74
7,26
m /s3
200
Caudal / Airflow
16.800
18.660
20.530
22.400
24.260
26.130
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
4,00 4,00 5,50 5,50 5,50 7,503,003,002,202,20
5,50 5,50 5,50 7,50 7,50 7,504,004,003,002,20
5,50 5,50 7,50 7,50 7,50 9,005,504,004,003,00
5,50 7,50 7,50 7,50 9,00 9,005,505,504,004,00
7,50 7,50 7,50 9,00 9,00 11,007,505,505,504,00
7,50 9,00 9,00 9,00 11,00 11,007,507,505,505,50
590 630 670 700 740 820550500460410
600 640 670 710 740 810560520480430
620 650 690 720 750 820580540500460
630 670 700 730 760 820600560530480
650 690 720 750 780 830620590550510
680 710 7.40 760 790 850640610580540
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
5,47
6,07
6,68
7,29
7,90
8,50
m /s3
250
Caudal / Airflow
19.680
21.870
24.060
26.240
28.430
30.620
470
2,20
5,50
TABLAS DE SELECCIONSELECTION TABLES
EDD/GDDEDD/GDD
Pág. 23
R
R
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
9,007,507,505,505,505,504,003,002,20
9,009,007,507,507,505,505,504,004,003,00
11,009,009,007,507,507,505,505,505,504,00
11,0011,009,009,007,507,507,505,505,505,50
15,0011,0011,009,009,009,007,507,505,50
15,0015,0011,0011,0011,009,009,009,007,507,50
820750710680640600550510460410
820760720680650610570530480440
830760730700660620590550510460
840770740710680640610570530490
850790760730690660630590560
860800770740710680650620580550
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
6,56
7,28
8,01
8,74
9,47
10,20
m /s3
330
Caudal / Airflow
23.600
26.220
28.850
31.470
34.090
36.720
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
7,50 7,50 9,00 9,00 11,00 15,005,505,504,003,00
7,50 9,00 9,00 11,00 11,00 15,007,505,505,504,00
9,00 9,00 11,00 11,00 15,00 15,007,507,505,505,50
9,00 11,00 11,00 15,00 15,00 18,509,007,507,505,50
11,00 11,00 15,00 15,00 15,00 18,509,009,007,507,50
15,00 15,00 15,00 15,00 18,50 18,5011,009,009,007,50
460 490 530 560 590 650420390350310
470 500 530 560 590 650430400360320
470 500 530 560 590 650440410370340
480 510 540 570 600 650450420390360
490 520 550 580 600 650470440410370
510 530 560 580 610 660480450420390
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
9,45
10,50
11,55
12,61
13,66
14,71
m /s3
420
Caudal / Airflow
34.040
37.820
41.600
45.380
49.160
52.940
520
4,00
7,50
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
15,0015,0011,009,009,007,507,505,504,00
15,0015,0015,0011,009,00390
7,507,505,504,00
18,5015,0015,0015,0011,0011,0011,007,507,505,50
18,5018,5015,0015,0015,0011,0011,0011,007,507,50
22,0018,5018,5015,0015,0015,0011,0011,007,50
22,0018,5018,5018,5015,0015,0015,0011,0011,0011,00
560500480450420390350320280240
550500480450420360320290250
550500470450420390360330300270
550500480450420400370340310280
550500480450430400380350320
550500480460430410380360330310
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
11,29
12,55
13,80
15,06
16,31
17,57
m /s3
520
Caudal / Airflow
40.650
45.170
49.680
54.200
58.720
63.240
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
11,00 11,00 11,00 15,00 15,00 18,507,507,505,505,50
11,00 11,00 15,00 15,00 15,00 18,5011,0011,007,505,50
15,00 15,00 15,00 18,50 18,50 22,0011,0011,0011,007,50
15,00 15,00 18,50 18,50 22,00 22,0015,0011,0011,0011,00
15,00 18,50 18,50 22,00 22,00 30,0015,0015,0011,0011,00
18,50 22,00 22,00 22,00 30,00 30,0018,5015,0015,0015,00
370 400 430 460 490 540340310280240
380 400 430 460 480 530350320280250
380 410 430 460 480 530350320290260
390 410 440 460 480 530360330300270
390 420 440 460 490 530370340310290
400 420 450 470 490 530380350330300
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
14,83
16,48
18,13
19,78
21,43
23,07
m /s3
660
Caudal / Airflow
53.400
59.340
65.270
71.200
77.140
83.070
290
5,50
11,00
9,00
TABLAS DE SELECCIONSELECTION TABLES
EDD/GDDEDD/GDD
Pág. 24
R
RTABLAS DE SELECCIONSELECTION TABLES
EDT/GDTEDT/GDT
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
3,002,202,202,201,501,501,101,100,75
3,002,202,202,202,201,501,501,501,101,10
3,003,003,002,202,202,201,501,501,501,10
4,003,003,003,002,202,202,202,201,501,50
4,004,003,003,003,003,002,202,201,50
5,504,004,004,003,003,003,002,202,202,20
17801620153014501360126011601050940820
17701620154014501360127011801080970870
177016201540146013801290120011101010910
178016301560148014001310123011401050960
179016501570150014201340126011801090
1800166015901520145013701290122011401070
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,98
2,18
2,38
2,57
2,77
m /s3
75
Caudal / Airflow
6.420
7.125
7.840
8.550
9.270
9.975
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,50 2,20 2,20 2,20 3,00 3,001,501,101,100,75
2,20 2,20 2,20 3,00 3,00 4,001,501,501,101,10
2,20 2,20 3,00 3,00 3,00 4,002,201,501,501,10
2,20 3,00 3,00 3,00 4,00 4,002,202,201,501,50
3,00 3,00 4,00 4,00 4,00 5,503,002,202,202,20
3,00 4,00 4,00 04,00 4,00 5,503,003,002,202,20
1130 1210 1290 1360 1440 15801040950850740
1140 1220 1300 1370 1440 15701060970880780
1160 1240 1310 1380 1450 158010801000910820
1180 1260 1330 1400 1460 159011101030950860
1210 1280 1350 1410 1480 160011401060980900
1240 1310 1370 1430 1500 1610117011001020950
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,15
2,38
2,62
2,86
3,10
3,34
m /s3
90
Caudal / Airflow
7.728
8.580
9.440
10.300
11.160
12.015
1010
1,10
2,20
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
4,003,003,003,002,202,202,201,101,10
4,004,003,003,003,002,202,2002,201,501,50
5,504,004,003,003,003,002,202,202,20
5,504,004,004,004,003,003,003,002,202,20
5,505,505,504,004,004,003,003,002,20
7,505,505,505,505,504,004,004,003,003,00
1300117011101040970900830750670580
1280116011001040970910840760680600
1280116011001040980920850780710630
1270116011101050990930870800730660
12801170112010601000950880820760
12801180113010801020960910850790720
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,88
3,20
3,52
3,84
4,16
4,48
m /s3
120
Caudal / Airflow
10.365
11.520
12.675
13.830
14.970
16.125
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
3,00 4,00 4,00 4,00 4,00 5,502,202,201,501,50
3,00 4,00 4,00 4,00 5,50 5,503,002,202,201,50
4,00 4,00 4,00 5,50 5,50 7,503,003,002,202,20
4,00 5,50 5,50 5,50 5,50 7,504,003,003,002,20
5,50 5,50 5,50 5,50 7,50 7,504,004,003,003,00
5,50 7,50 7,50 7,50 7,50 7,505,504,004,004,00
970 1130 1130 1200 1270 1400890800700600
970 1120 1120 1190 1260 1390890800720620
980 1120 1120 1190 1250 1380900820730650
980 1120 1120 1190 1250 1370910830760680
990 1130 1130 1190 1250 1370920850780710
1010 1140 1140 1200 1260 1370940880810740
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
3,57
3,97
4,37
4,77
5,16
5,56
m /s3
150
Caudal / Airflow
12.870
14.295
15.735
17.160
18.585
20.020
690
1,50
3,00
1,78
1,50
Pág. 25
R
R
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
5,505,505,504,004,003,003,002,201,50
7,505,505,505,504,004,004,003,003,002,20
7,507,505,505,505,504,004,004,003,00-
7,507,507,507,505,505,505,504,004,00-
9,007,507,507,507,505,505,504,00-
-9,009,007,507,507,507,505,50--
11191010960900840780720650590510
11101010960900850790730670610540
11061010960910860800750690630-
11061010970920870820760710660-
11101020980930880830780730680
-1030990940900850810760--
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
4,06
4,51
4,96
5,41
5,86
6,31
m /s3
195
Caudal / Airflow
14.610
16.230
17.850
19.470
21.100
22.725
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
4,00 4,00 5,50 5,50 5,50 -3,003,002,202,20
4,00 5,50 5,50 7,50 7,50 -4,003,003,002,20
5,50 5,50 7,50 7,50 7,50 -4,004,003,003,00
5,50 7,50 7,50 7,50 9,00 -5,504,004,003,00
7,50 7,50 7,50 9,00 9,00 -5,505,505,504,00
7,50 9,00 9,00 11,00 -7,505,505,505,50
650 700 750 800 840 -590540470410
650 700 750 790 840 -600540490420
660 700 750 790 840 -610550500440
660 710 750 800 840 -620570510460
670 720 760 800 840 -630580530480
680 730 770 810 850 -640600550500
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
5,42
6,02
6,62
7,22
7,82
8,43
m /s3
240
Caudal / Airflow
19.500
21.670
23.835
26.010
28.170
30.330
-
2,20
5,50
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
-9,007,507,505,505,504,003,002,20
-9,007,507,507,505,505,504,003,003,00
-9,009,007,507,507,505,505,504,003,00
-11,009,009,007,507,507,505,505,504,00
-11,0011,009,009,007,507,505,505,50
-15,0011,0011,009,009,007,507,507,505,50
-880830780730670610550490420
-870830780730670620560500430
-870820780730680620570510450
-870820780730680630580520460
-870830780740690640590540
-870830790750700650610560500
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
7,00
7,78
8,55
9,33
10,11
10,89
m /s3
300
Caudal / Airflow
25.200
27.990
30.795
33.600
36.390
39.190
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
5,50 7,50 7,50 7,50 9,00 11,005,504,004,003,00
7,50 7,50 9,00 9,00 9,00 11,005,505,504,004,00
7,50 9,00 9,00 11,00 11,00 15,007,507,505,505,50
9,00 9,00 11,00 11,00 15,00 15,007,507,507,505,50
11,00 11,00 11,00 15,00 15,00 15,009,009,007,507,50
11,00 15,00 15,00 15,00 15,00 18,5011,009,009,007,50
600 650 690 720 760 840560520470420
620 660 690 730 770 840580540490450
630 670 710 740 770 840600560520470
650 690 720 750 780 850620580540500
670 710 740 770 800 860640600570530
690 730 760 790 820 870660630590550
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
8,20
9,11
10,02
10,93
11,84
12,76
m /s3
375
Caudal / Airflow
29.520
32.800
36.080
39.360
42.640
45.920
480
4,00
7,50
7,50
TABLAS DE SELECCIONSELECTION TABLES
EDT/GDTEDT/GDT
Pág. 26
R
RTABLAS DE SELECCIONSELECTION TABLES
ESS/GSSESS/GSS
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
0,750,750,550,550,550,370,370,250,18
1,100,750,750,550,550,550,370,370,370,25
1,100,750,750,750,550,550,550,370,370,37
1,101,100,750,750,750,750,550,550,550,37
1,101,101,101,100,750,750,550,550,55
1,501,101,101,101,100,750,750,750,550,55
15701450138013201250118011101030950860
159014701410135012901220115010801000920
161015001450139013301260120011301050970
1650154014901430137013101250118011101030
168015801530147014201360130012301170
1720162015701520146014101350129012201150
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
0,53
0,58
0,63
0,69
0,74
m /s3
20
Caudal / Airflow
1.710
1.900
2.090
2.280
2.470
2.660
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
0,55 0,55 0,75 0,75 1,10 1,100,550,370,370,25
0,55 0,75 0,75 1,10 1,10 1,100,550,550,370,37
0,75 0,75 1,10 1,10 1,10 1,500,750,550,550,37
0,75 1,10 1,10 1,10 1,10 1,500,750,750,550,55
1,10 1,10 1,10 1,10 1,50 1,500,750,750,750,55
1,10 1,10 1,50 1,50 1,50 2,201,101,100,750,75
970 1030 1080 1140 1190 1300900840770690
1000 1050 1110 1160 1210 1310940870800730
1030 1080 1130 1180 1230 1330970910840770
1060 1110 1160 1210 1260 13501000950890820
1100 1150 1190 1240 1290 13801040990930860
1130 1180 1230 1270 1320 140010801030970910
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
0,65
0,72
0,79
0,86
0,94
1,01
m /s3
30
Caudal / Airflow
2.330
2.590
2.850
3.110
3.370
3.630
1090
0,37
0,75
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,501,101,101,101,100,750,750,550,55
1,501,501,501,101,101,101,100,750,75-
2,201,501,501,501,501,101,101,101,10
2,202,202,201,501,501,501,501,10--
2,202,202,202,202,201,50---
3,002,202,202,202,202,202,20---
1070990940900850800740690630560
10801000960910860820770710660-
11001020970930890840790740690-
11101030990950910870820770--
113010601020980940890850--
1150108010401000960920880---
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
0,98
1,09
1,20
1,30
1,41
1,52
m /s3
40
Caudal / Airflow
3.520
3.910
4.300
4.695
5.090
5.480
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,10 1,10 1,50 1,50 1,50 2,201,100,750,750,55
1,50 1,50 1,50 1,50 2,20 2,201,101,101,10-
1,50 1,50 2,20 2,20 2,20 2,201,501,101,10-
2,20 2,20 2,20 2,20 2,20 3,001,501,50--
2,20 2,20 2,20 3,00 3,00 3,002,202,20--
2,20 3,00 3,00 3,00 3,00 4,002,20---
650 690 740 780 820 890610560510450
670 710 750 790 820 890620580530-
680 720 760 800 830 900640600560-
700 740 780 810 850 910660620--
720 760 790 830 860 920690650--
750 780 810 850 880 940710---
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,29
1,44
1,58
1,72
1,87
2,01
m /s3
60
Caudal / Airflow
4.650
5.170
5.680
6.200
6.720
7.230
-
0,75
1,50
0,48
-
Pág. 27
R
R
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
2,202,202,201,501,501,101,100,750,55
3,002,202,202,201,501,501,101,101,100,75
3,002,202,202,202,201,501,501,101,101,10
3,003,002,202,202,202,201,501,501,101,10
4,003,003,003,002,202,201,501,501,50
4,003,003,003,003,002,202,202,202,201,50
820750710660620580530480430380
820740700670620580540490440390
810740710670630590550510460410
810750710680640600560520480430
820750720690650610580540490
820760730700660630590550510470
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
1,72
1,91
2,10
2,29
2,48
2,67
m /s3
80
Caudal / Airflow
6.175
6.860
7.550
8.230
8.920
9.605
SELECCION / :SELECTION Silenciosa / Low noise Estandar / Standar Industrial / Industrial
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
1,50 2,20 2,20 2,20 2,20 3,001,501,101,100,75
2,20 2,20 2,20 2,20 3,00 3,001,501,501,101,10
2,20 2,20 3,00 3,00 3,00 4,002,201,501,501,10
2,20 3,00 3,00 3,00 4,00 4,002,202,201,501,50
3,00 3,00 3,00 4,00 4,00 4,002,202,202,201,50
3,00 4,00 4,00 4,00 5,503,003,002,202,20
530 560 600 640 670 740480440400350
530 570 600 640 670 740490450410370
540 580 610 640 670 740510470430390
550 590 620 650 680 740520480450410
570 600 630 660 690 740530500460430
580 610 640 670 700 750550520480450
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,17
2,41
2,65
2,89
3,13
3,37
m /s3
100
Caudal / Airflow
7.800
8.670
9.540
10.400
11.270
12.140
450
1,10
2,20
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
4,003,003,003,002,202,202.201,501,10
4,004,004,003,003,002,202,202,201,501,10
5,504,004,004,003,003,002,202,202,201,50
5,505,504,004,004,003,003,003,002,202,20
5,505,505,504,004,004,003,003,002,20
7,505,505,505,505,504,004,004,003,003,00
660600570540510470440400360320
660600570540510480450410380340
660610580550520490460430390360
660610590560530500470440410380
670620600570540520490460430
680630610580560530510480450430
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
2,90
3,22
3,54
3,86
4,19
4,51
m /s3
130
Caudal / Airflow
10.430
11.590
12.750
13.910
15.070
16.230
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
Motor (Kw)
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
R.p.m.
3,00 3,00 4,00 4,00 4,00 5,502,202,201,501,50
3,00 4,00 4,00 4,00 5,50 5,503,002,202,201,50
4,00 4,00 5.50 5,50 5,50 7,503,003,002,202,20
4,00 5,50 5,50 5,50 5,50 7,504,003,003,002,20
5,50 5,50 5,50 7,50 7,50 7,504,004,003,003,00
5,50 5,50 7,50 7,50 7,50 9,005,504,004,004,00
400 430 460 490 510 570370340310270
410 440 490 510 560380350320280
420 440 470 490 520 560390360330300
430 450 480 500 520 570400370340320
440 460 480 510 530 570410390360330
450 470 490 520 540 580420400370350
TamañoSize
Presión Estática (Pa) Static Pressure
600500450400350300250200150100m /h3
3,88
4,31
4,74
5,17
5,60
6,03
m /s3
180
Caudal / Airflow
13.950
15.500
17.050
18.600
20.150
21.700
400
1,50
3,00
3,00
460
TABLAS DE SELECCIONSELECTION TABLES
ESS/GSSESS/GSS
Pág. 28
RECOMENDACIONES PARA LA INSTALACIÓN
COMPROBACIONES EN LA PUESTA EN MARCHA
INSTRUCCIONES DE MANTENIMIENTO
Las unidades de ventilación, deben ir ubicadas en lugaresdonde se permita un adecuado acceso a su interior por el ladode registro de mantenimiento. Si es posible, también esconveniente dejar un espacio mínimo de 0,5 m., al ladocontrario al registro para limpieza de la envolvente.
Para evitar la transmisión de vibraciones, esrecomendable hacer la unión de la unidad-conducto conconexión flexible. EL PESO DE LOS CONDUCTOS NUNCADEBE SER SOPORTADO POR LA UNIDAD.
Las conexiones eléctricas, deben realizarse mediantetubo flexible, para evitar la transmisión de vibraciones o ruidos.El paso de los cables a través de la envolvente se hará pormedio de prensaestopas o pasacables adecuados para evitarfugas de aire o entradas de agua. La instalación eléctrica deberealizarse de acuerdo con las normativas vigentes.
Quitar las protecciones para el transporte (soportes ocalzos de bloqueo del grupo moto-ventilador).
a inexistencia de objetos extraños dentrodel ventilador y los conductos a él conectados.
a alineación de poleas y la tensión de lascorreas sean correctas.
ue el rotor del motor y el rodete delventilador giren de forma suave y en su sentido correcto degiro.
Asegurarse que la tensión de la red eléctrica coincidecon la señalada en la placa de características del motor.
Medir la intensidad efectiva del motor y confrontarla conlos datos de la placa.
No conectar ni poner en funcionamiento sin antes haberapartado todas las herramientas que se estén utilizando ycerrada la puerta de registro.
Para evitar accidentes, SE PROHIBE la manipulaciónde la unidad, sin antes haber procedido a la desconexión de lared eléctrica de alimentación.
Cada dos o tres meses se procederá a revisar lasunidades. Esta periodicidad podrá variar en función de lascondiciones particulares de utilización y ubicación; serecomienda realizar para ello las siguientes operaciones:
Alineamiento entre poleas.
Tensado de correas si es necesario.
Si en una transmisión de varias correas fuera necesariosustituir alguna de ellas por desgaste o rotura, se deberánsustituir todas las demás.
Verificar los rodamientos del ventilador y del motor.Proceder a su engrase si fuera necesario.
Comprobar que el rodete este perfectamenteequilibrado y no roce con la envolvente del ventilador.
Comprobar que la conexión flexible de la boca deimpulsión no presenta roturas ni fugas.
Procurar que el ventilador no funcione con la puerta deinspección abierta, evitando la sobrecarga del motor.
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
¨
Comprobar l
Verificar que l
Comprobar q
Limpieza de los álabes del rodete.
R
RINSTALACION Y MANTENIMIENTOINSTALLATION AND MAINTENANCE
The ventilation units must be located in places which alloweasy access to the interior through the side for maintenance. Ifpossible, it would be advisable to leave a minimum space of 0.5m. on the opposite side of the access to allow the cleaning ofthe casing.
In order to avoid vibration transmission, it is recommendedto connect the unit to the duct by means of a flexible connection.THE UNIT MUST NEVER SUPPORT THE WEIGHT OFDUCTS.
Electrical connections must be made through a flexibletube in order to avoid the transmission of vibrations or noise.The cables must pass through the casing by means of asuitable airtight cable clamp in order to avoid air inlets or waterleaks.Wiring must be installed in compliance with the electricalsafety standards.
Remove protection devices for transport (supports orlocking clamps from the fan-motor assembly).
Check for foreign bodies inside the fan and the ductsconnected to it.
Check that pulley alignment and belt tensioning arecorrect.
Check that the motor and the fan impeller rotatesmoothly and in the proper direction.
Make sure that the voltage of the electric supplycoincides with the voltage indicated on the motor plate.
Measure the effective current of the motor and compareit with the specifications shown on the plate.
Remove any tools and close the access door beforeconnecting or activating the unit.
To avoid accidents, handling IS FORBIDDEN if theelectric system has not been previously disconnected.
INSTALLATION
START-UP CHECK
ADVICES
¨
¨
¨
¨
¨
¨
¨
¨
Pág. 29
INSTRUCTIONS FOR MAINTENANCE
The units must be checked every two or three months.Thisperiod may vary depending on the specific conditions of useand situation.For this reason we recommended:
Alignment between pulleys.
Tighten the belts, if necessary.
If replacement of one of the transmission belts is neededdue to wear or break, the rest of the belts must be replaced aswell.
Check ball bearings of the fan and the motor. Ifnecessary, lubricate them.
Check that the impeller is perfectly balanced and doesnot rub against the casing.
Clean the impeller blades.
Check for leakages or damages on the flexibleconnections.
Avoid fan operation when the access door is open as thiscan overload the motor.
¨
¨
¨
¨
¨
¨
¨
¨
top related